A mutation in which alanine 128 Is replaced by aspartic acid abolishes dimerization of the b-subunit of the F0F1-ATPase from Escherichia coli

Escherichia coli F1Fo-ATP synthase with a b/δ fusion protein allows analysis of the function of the individual b subunits

The "stator stalk" of F1Fo-ATP synthase is essential for rotational catalysis as it connects the nonrotating portions of the enzyme. In Escherichia coli, the stator stalk consists of two (identical) b subunits and the δ subunit. In mycobacteria, one of the b subunits and the δ subunit are replaced by a b/δ fusion protein; the remaining b subunit is of the shorter b' type. In the present study, it is shown that it is possible to generate a functional E. coli ATP synthase containing a b/δ fusion protein. This construct allowed the analysis of the roles of the individual b subunits. The full-length b subunit (which in this case is covalently linked to δ in the fusion protein) is responsible for connecting the stalk to the catalytic F1 subcomplex. It is not required for interaction with the membrane-embedded Fo subcomplex, as its transmembrane helix can be removed. Attachment to Fo is the function of the other b subunit which in turn has only a minor (if any at all) role in binding to δ. Also in E. coli the second b subunit can be shortened to a b' type.

Manipulating the length of the b subunit F1 binding domain in F1F0 ATP synthase from Escherichia coli

The peripheral stalk of F(1)F(0) ATP synthase is composed of a parallel homodimer of b subunits that extends across the cytoplasmic membrane in F(0) to the top of the F(1) sector. The stalk serves as the stator necessary for holding F(1) against movement of the rotor. A series of insertions and deletions have been engineered into the hydrophilic domain that interacts with F(1). Only the hydrophobic segment from val-121 to ala-132 and the extreme carboxyl terminus proved to be highly sensitive to mutation. Deletions in either site apparently abolished enzyme function as a result of defects is assembly of the F(1)F(0) complex. Other mutations manipulating the length of the sequence between these two areas had only limited effects on enzyme function. Expression of a b subunit with insertions with as few as two amino acids into the hydrophobic segment also resulted in loss of F(1)F(0) ATP synthase. However, a fully defective b subunit with seven additional amino acids could be stabilized in a heterodimeric peripheral stalk within a functional F(1)F(0) complex by a normal b subunit.

The Na(+)-translocating F(1)F(0) ATP synthase of Propionigenium modestum: mechanochemical insights into the F(0) motor that drives ATP synthesis

The ATP synthase of Propionigenium modestum encloses a rotary motor involved in the production of ATP from ADP and inorganic phosphate utilizing the free energy of an electrochemical Na(+) ion gradient. This enzyme clearly belongs to the family of F(1)F(0) ATP synthases and uses exclusively Na(+) ions as the physiological coupling ion. The motor domain, F(0), comprises subunit a and the b subunit dimer which are part of the stator and the subunit c oligomer acting as part of the rotor. During ATP synthesis, Na(+) translocation through F(0) proceeds from the periplasm via the stator channel (subunit a) onto a Na(+) binding site of the rotor (subunit c). Upon rotation of the subunit c oligomer versus subunit a, the occupied rotor site leaves the interface with the stator and the Na(+) ion can freely dissociate into the cytoplasm. Recent experiments demonstrate that the membrane potential is crucial for ATP synthesis under physiological conditions. These findings support the view that voltage generates torque in F(0), which drives the rotation of the gamma subunit thus liberating tightly bound ATP from the catalytic sites in F(1). We suggest a mechanochemical model for the transduction of transmembrane Na(+)-motive force into rotary torque by the F(0) motor that can account quantitatively for the experimental data.

Specific heterodimer formation by the cytoplasmic domains of the b and b' subunits of cyanobacterial ATP synthase

The soluble domains of the b and b' subunits of the ATP synthase of the cyanobacterium Synechocystis PCC 6803 were expressed with His tags attached to their N-termini. Following purification, the polypeptides were characterized by chemical cross-linking, analytical ultracentrifugation, and circular dichroism spectroscopy. Treatment of a mixture of the soluble b and b' domains with a chemical cross-linking agent led to substantial formation of cross-linked dimers, whereas similar treatment of either domain by itself resulted in only trace formation of cross-linked species. The molecular weights of the domains of b and b' in solution at 20 degrees C, measured by sedimentation equilibrium, were 17 800+/-700 and 16 300+/-400, respectively, compared to calculated polypeptide molecular weights of 16 635 and 15 422, whereas a mixture of b and b' gave a molecular weight of 29 800+/-800. The sedimentation coefficient of an equimolar mixture was 1.73+/-0.03. The circular dichroism spectra of the individual polypeptides indicated helical contents in the range of 40-50%; the spectrum of the mixture revealed changes indicative of coiled-coil formation and a helical content of 60%. The results indicate that the cytosolic domains of the b and b' subunits exist individually as monomers but form a highly extended heterodimer when they are mixed together.

A re-examination of the structural and functional consequences of mutation of alanine-128 of the b subunit of Escherichia coli ATP synthase to aspartic acid

The effects of mutation of residue Ala-128 of the b subunit of Escherichia coli ATP synthase to aspartate on the structure of the subunit and its interaction with the F(1) sector were analyzed. Determination of solution molecular weights by sedimentation equilibrium ultracentrifugation revealed that the A128D mutation had little effect on dimerization in the soluble b construct, b(34-156). However, the mutation caused a structural perturbation detected through both a 12% reduction in the sedimentation coefficient and also a reduced tendency to form intersubunit disulfide bonds between cysteine residues inserted at position 132. Unlike the wild-type sequence, the A128D mutant was unable to interact with F(1)-ATPase. These results indicate that the A128D mutation caused a structural change in the C-terminal region of the protein, preventing the binding to F(1) but having little or no effect on the dimeric nature of b.

The b subunit of Escherichia coli ATP synthase

The b subunit of ATP synthase is a major component of the second stalk connecting the F1 and F0 sectors of the enzyme and is essential for normal assembly and function. The 156-residue b subunit of the Escherichia coli ATP synthase has been investigated extensively through mutagenesis, deletion analysis, and biophysical characterization. The two copies of b exist as a highly extended, helical dimer extending from the membrane to near the top of F1, where they interact with the delta subunit. The sequence has been divided into four domains: the N-terminal membrane-spanning domain, the tether domain, the dimerization domain, and the C-terminal delta-binding domain. The dimerization domain, contained within residues 60-122, has many properties of a coiled-coil, while the delta-binding domain is more globular. Sites of crosslinking between b and the a, alpha, beta, and delta subunits of ATP synthase have been identified, and the functional significance of these interactions is under investigation. The b dimer may serve as an elastic element during rotational catalysis in the enzyme, but also directly influences the catalytic sites, suggesting a more active role in coupling.

The ATP synthase of Escherichia coli: structure and function of F(0) subunits

In this review we discuss recent work from our laboratory concerning the structure and/or function of the F(0) subunits of the proton-translocating ATP synthase of Escherichia coli. For the topology of subunit a a brief discussion gives (i) a detailed picture of the C-terminal two-thirds of the protein with four transmembrane helices and the C terminus exposed to the cytoplasm and (ii) an evaluation of the controversial results obtained for the localization of the N-terminal region of subunit a including its consequences on the number of transmembrane helices. The structure of membrane-bound subunit b has been determined by circular dichroism spectroscopy to be at least 75% alpha-helical. For this purpose a method was developed, which allows the determination of the structure composition of membrane proteins in proteoliposomes. Subunit b was purified to homogeneity by preparative SDS gel electrophoresis, precipitated with acetone, and redissolved in cholate-containing buffer, thereby retaining its native conformation as shown by functional coreconstitution with an ac subcomplex. Monoclonal antibodies, which have their epitopes located within the hydrophilic loop region of subunit c, and the F(1) part are bound simultaneously to the F(0) complex without an effect on the function of F(0), indicating that not all c subunits are involved in F(1) interaction. Consequences on the coupling mechanism between ATP synthesis/hydrolysis and proton translocation are discussed.

The second stalk of Escherichia coli ATP synthase

Two stalks link the F(1) and F(0) sectors of ATP synthase. The central stalk contains the gamma and epsilon subunits and is thought to function in rotational catalysis as a rotor driving conformational changes in the catalytic alpha(3)beta(3) complex. The two b subunits and the delta subunit associate to form b(2)delta, a second, peripheral stalk extending from the membrane up the side of alpha(3)beta(3) and binding to the N-terminal regions of the alpha subunits, which are approx. 125 A from the membrane. This second stalk is essential for binding F(1) to F(0) and is believed to function as a stator during rotational catalysis. In vitro, b(2)delta is a highly extended complex held together by weak interactions. Recent work has identified the domains of b which are essential for dimerization and for interaction with delta. Disulphide cross-linking studies imply that the second stalk is a permanent structure which remains associated with one alpha subunit or alphabeta pair. However, the weak interactions between the polypeptides in b(2)delta pose a challenge for the proposed stator function.

The dimerization domain of the b subunit of the Escherichia coli F(1)F(0)-ATPase

In this study a series of N- and/or C-terminal truncations of the cytoplasmic domain of the b subunit of the Escherichia coli F(1)F(0) ATP synthase were tested for their ability to form dimers using sedimentation equilibrium ultracentrifugation. The deletion of residues between positions 53 and 122 resulted in a strongly decreased tendency to form dimers, whereas all the polypeptides that included that sequence exhibited high levels of dimer formation. b dimers existed in a reversible monomer-dimer equilibrium and when mixed with other b truncations formed heterodimers efficiently, provided both constructs included the 53-122 sequence. Sedimentation velocity and (15)N NMR relaxation measurements indicated that the dimerization region is highly extended in solution, consistent with an elongated second stalk structure. A cysteine introduced at position 105 was found to readily form intersubunit disulfides, whereas other single cysteines at positions 103-110 failed to form disulfides either with the identical mutant or when mixed with the other 103-110 cysteine mutants. These studies establish that the b subunit dimer depends on interactions that occur between residues in the 53-122 sequence and that the two subunits are oriented in a highly specific manner at the dimer interface.

The second stalk composed of the b- and delta-subunits connects F0 to F1 via an alpha-subunit in the Escherichia coli ATP synthase

The b- and delta-subunits of the Escherichia coli ATP synthase are critical for binding ECF1 to the F0 part, and appear to constitute the stator necessary for holding the alpha3beta3 hexamer as the c-epsilon-gamma domain rotates during catalysis. Previous studies have determined that the b-subunits are dimeric for a large part of their length, and interact with the F1 part through the delta-subunit (Rodgers, A. J. W., Wilkens, S., Aggeler, R., Morris, M. B., Howitt, S. M., and Capaldi, R. A. (1997) J. Biol. Chem. 272, 31058-31064). To further study b-subunit interactions, three mutants were constructed in which Ser-84, Ala-144, and Leu-156, respectively, were replaced by Cys. Treatment of purified ECF1F0 from all three mutants with CuCl2 induced disulfide formation resulting in b-subunit dimer cross-link products. In addition, the mutant bL156C formed a cross-link from a b-subunit to an alpha-subunit via alphaCys90. Neither b-b nor b-alpha cross-linking had significant effect on ATPase activities in any of the mutants. Proton pumping activities were measured in inner membranes from the three mutants. Dimerization of the b-subunit did not effect proton pumping in mutants bS84C or bA144C. In the mutant bL156C, CuCl2 treatment reduced proton pumping markedly, probably because of uncoupling caused by the b-alpha cross-link formation. The results show that the alpha-subunit forms part of the binding site on ECF1 for the b2delta domain and that the b-subunit extends all the way from the membrane to the top of the F1 structure. Some conformational flexibility in the connection between the second stalk and F1 appears to be required for coupled catalysis.

Deletions in the second stalk of F1F0-ATP synthase in Escherichia coli

In Escherichia coli F1F0-ATP synthase, the two b subunits form the second stalk spanning the distance between the membrane F0 sector and the bulk of F1. Current models predict that the stator should be relatively rigid and engaged in contact with F1 at fixed points. To test this hypothesis, we constructed a series of deletion mutations in the uncF(b) gene to remove segments from the middle of the second stalk of the subunit. Mutants with deletions of 7 amino acids were essentially normal, and those with deletions of up to 11 amino acids retained considerable activity. Membranes prepared from these strains had readily detectable levels of F1-ATPase activity and proton pumping activity. Removal of 12 or more amino acids resulted in loss of oxidative phosphorylation. Levels of membrane-associated F1-ATPase dropped precipitously for the longer deletions, and immunoblot analysis indicated that reductions in activity correlated with reduced levels of b subunit in the membranes. Assuming the likely alpha-helical conformation for this area of the b subunit, the 11-amino acid deletion would result in shortening the subunit by approximately 16 A. Since these deletions did not prevent the b subunit from participating in productive interactions with F1, we suggest that the b subunit is not a rigid rodlike structure, but has an inherent flexibility compatible with a dynamic role in coupling.

A domain flip as a result of a single amino-acid substitution

BACKGROUND

The self-assembly properties of beta domains are important features of diverse classes of proteins that include cell-adhesion molecules, surface receptors and the immunoglobulin superfamily. Immunoglobulin light-chain variable domains are well suited to the study of structural factors that determine dimerization, including how residues at the interface influence the preferred dimer arrangement.

RESULTS

Single-site mutants of light-chain variable domain Len, designated LenQ38E and LenK30T, formed 'flipped' dimers in which one domain was rotated by about 180 degrees compared with the native protein. The dimer in the native protein is similar to that found between variable domains in Fab immunoglobulin fragments. When compared to the native dimer, more surface area is buried, and more hydrogen bonds and salt bridges are formed between the monomers in the flipped conformation.

CONCLUSIONS

Immunoglobulin light-chain variable domains can form a minimum of two distinct quaternary structures. Single-site mutations resulting from changes of one base, such as the exchange of Gln38 to Glu or Lys30 to Thr, change the 'conventional' dimer of protein Len to a flipped arrangement. Native Len is not found in the flipped-domain dimer conformation because it would have excess positive electrostatic potential at the dimer interface that is not compensated by other forces. Excess negative or positive electrostatic potential at the dimer interface can have a determining effect on the mode of dimerization.

Identification of an uncoupling mutation affecting the b subunit of F1F0 ATP synthase in Escherichia coli

A specific b subunit arginine, b(Arg-36) in Escherichia coli, displays evolutionary conservation among bacterial F1F0 ATP synthases. Site-directed mutagenesis was used to generate a collection of mutations affecting b(Arg-36). The phenotype differed depending upon the substitution, and the b(Arg-36-Glu) and b(Arg-36-Ile) substitutions virtually abolished enzyme function. Although the total amounts of F1F0 ATP synthase present in the membranes prepared from mutant strains were reduced, the primary effect of the b(Arg-36) substitutions was on the activities of the intact enzyme complexes. The most interesting result was that the b(Arg-36-Glu) substitution results in the uncoupling of a functional F0 from F1 ATP hydrolysis activity.

Formation of the b subunit dimer is necessary for interaction with F1-ATPase

In earlier work, we [McCormick, K. A., et al. (1993) J. Biol. Chem. 268, 24683-24691] observed that mutations at Ala-79 of the b subunit affect assembly of F1F0 ATP synthase. Polypeptides modeled on the soluble portion of the b subunit (bsol) with substitutions at the position corresponding to Ala-79 have been used to investigate secondary structure and dimerization of the b subunit. Circular dichroism spectra and chymotrypsin digestion experiments suggested that the recombinant polypeptides with Ala-79 substitutions assumed conformations similar to the bsol polypeptide. However, cross-linking studies of the Ala-79 substitution bsol polypeptides revealed defects in dimerization. The efficiency of dimer formation appeared to be related to the capacity of the altered bsol polypeptides for competing with F1-ATPase for binding to F1-depleted membrane vesicles. Ala-79 substitution polypeptides displaying limited dimerization, such as bsol Ala-79-->Leu, were shown to elute with F1-ATPase during size exclusion chromatography, suggesting a specific interaction. Sedimentation equilibrium studies indicated that 8% of the bsol Ala-79-->Leu polypeptide was in the form of a 30.6 kDa dimer and 92% a 15.3 kDa monomer. When the dimer concentration of bsol Ala-79-->Leu was normalized to the concentration of bsol, both had virtually identical capacities for competing with F1-depleted membrane vesicles for binding F1-ATPase. The result indicated that the amount of dimer formed is directly proportional to its ability to bind F1-ATPase. This suggests that formation of the b subunit dimer may be a necessary step preceding F1-ATPase binding in the assembly of the enzyme complex.

The subunit delta-subunit b domain of the Escherichia coli F1F0 ATPase. The B subunits interact with F1 as a dimer and through the delta subunit

The delta and b subunits are both involved in binding the F1 to the F0 part in the Escherichia coli ATP synthase (ECF1F0). The interaction of the purified delta subunit and the isolated hydrophilic domain of the b subunit (bsol) has been studied here. Purified delta binds to bsol weakly in solution, as indicated by NMR studies and protease protection experiments. On F1, i.e. in the presence of ECF1-delta, delta, and bsol interact strongly, and a complex of ECF1.bsol can be isolated by native gel electrophoresis. Both delta subunit and bsol are protected from trypsin cleavage in this complex. In contrast, the delta subunit is rapidly degraded by the protease when bound to ECF1 when bsol is absent. The interaction of bsol with ECF1 involves the C-terminal domain of delta as delta(1-134) cannot replace intact delta in the binding experiments. As purified, bsol is a stable dimer with 80% alpha helix. A monomeric form of bsol can be obtained by introducing the mutation A128D (Howitt, S. M., Rodgers, A. J.,W., Jeffrey, P. D., and Cox, G. B. (1996) J. Biol. Chem. 271, 7038-7042). Monomeric bsol has less alpha helix, i.e. only 58%, is much more sensitive to trypsin cleavage than dimer, and unfolds at much lower temperatures than the dimer in circular dichroism melting studies, indicating a less stable structure. The bsol dimer, but not monomer, binds to delta in ECF1. To examine whether subunit b is a monomor or dimer in intact ECF1F0, CuCl2 was used to induce cross-link formation in the mutants bS60C, bQ104C, bA128C, bG131C, and bS146C. With the exception of bS60C, CuCl2 treatment resulted in formation of b subunit dimers in all mutants. Cross-linking yield was independent of nucleotide conditions and did not affect ATPase activity. These results show the b subunit to be dimeric for a large portion of the C terminus, with residues 124-131 likely forming a pair of parallel alpha helices.

Interaction of the delta and b subunits contributes to F1 and F0 interaction in the Escherichia coli F1F0-ATPase

Interactions of the F1F0-ATPase subunits between the cytoplasmic domain of the b subunit (residues 26-156, bcyt) and other membrane peripheral subunits including alpha, beta, gamma, delta, epsilon, and putative cytoplasmic domains of the a subunit were analyzed with the yeast two-hybrid system and in vitro reconstitution of ATPase from the purified subunits as well. Only the combination of bcyt fused to the activation domain of the yeast GAL-4, and delta subunit fused to the DNA binding domain resulted in the strong expression of the beta-galactosidase reporter gene, suggesting a specific interaction of these subunits. Expression of bcyt fused to glutathione S-transferase (GST) together with the delta subunit in Escherichia coli resulted in the overproduction of these subunits in soluble form, whereas expression of the GST-bcyt fusion alone had no such effect, indicating that GST-bcyt was protected by the co-expressed delta subunit from proteolytic attack in the cell. These results indicated that the membrane peripheral domain of b subunit stably interacted with the delta subunit in the cell. The affinity purified GST-bcyt did not contain significant amounts of delta, suggesting that the interaction of these subunits was relatively weak. Binding of these subunits observed in a direct binding assay significantly supported the capability of binding of the subunits. The ATPase activity was reconstituted from the purified bcyt together with alpha, beta, gamma, delta, and epsilon, or with the same combination except epsilon. Specific elution of the ATPase activity from glutathione affinity column with the addition of glutathione after reconstitution demonstrated that the reconstituted ATPase formed a complex. The result indicated that interaction of b and delta was stabilized by F1 subunits other than epsilon and also suggested that b-delta interaction was important for F1-F0 interaction.

Dimerization interactions of the b subunit of the Escherichia coli F1F0-ATPase

Site-directed mutagenesis and N-terminal truncations were used to examine dimerization interactions in the b subunit of Escherichia coli F1F0-ATPase. Individual cysteine residues were incorporated into bsyn, a soluble form of the protein lacking the membrane-spanning N-terminal domain, in two main areas: the heptad repeat region and the hydrophobic region which begins at residue Val-124. The tendencies of these cysteine residues to form disulfide bonds with the corresponding cysteine in the bsyn dimer were tested using disulfide exchange by glutathione and air oxidation catalyzed by Cu2+. Within the heptad repeat region, only cysteines at residues 59 and 60, which occupy the b and c positions of the heptad repeat, showed significant tendencies to form disulfides, a result inconsistent with a coiled-coil model for bsyn. Mixed disulfide formation most readily occurred with the S60C + L65C and A61C + L65C pairs. Cysteines at positions 124, 128, 132, and 139 showed strong tendencies to form disulfides with their mates in the dimer, suggesting a parallel alpha-helical interaction between the subunits in this region. Deletion of residues N-terminal to either Glu-34 or Asp-53 had no apparent effect on dimerization as determined by sedimentation equilibrium, while deletion of all residues N-terminal to Lys-67 produced a monomeric form. These results imply that residues 53-66 but not 24-52 are essential for bsyn dimerization. Taken together the results are consistent with a model in which the two b subunits interact in more than one region, including a parallel alignment of helices containing residues 124-139.

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

The coupling of the relative movement of the a and c subunits of the F0 to the conformational changes in the F1-ATPase

F0F1-ATPase structural information gained from X-ray crystallography and electron microscopy has activated interest in a rotational mechanism for the F0F1-ATPase. Because of the subunit stoichiometry and the involvement of both a- and c-subunits in the mechanism of proton movement, it is argued that relative movement must occur between the subunits. Various options for the arrangement and structure of the subunits involved are discussed and a mechanism proposed.