Molecular and biochemical characterization of an endo-beta-1,3- glucanase of the hyperthermophilic archaeon Pyrococcus furiosus

Selective enrichment on a wide polysaccharide spectrum allowed isolation of novel metabolic and taxonomic groups of haloarchaea from hypersaline lakes

Extremely halophilic archaea (haloarchaea) of the class Halobacteria is a dominant group of aerobic heterotrophic prokaryotic communities in salt-saturated habitats, such as salt lakes and solar salterns. Most of the pure cultures of haloarchaea were enriched, isolated, and cultivated on rich soluble substrates such as amino acids, peptides or simple sugars. So far, the evidences on the capability of haloarchaea to use different polysaccharides as growth substrates remained scarce. However, it is becoming increasingly obvious that these archaea can also actively participate in mineralization of complex biopolymers, in particular cellulose and chitin-two dominant biomass polysaccharides on the planet. Here we used an array of commercially available homo- and heteropolysaccharides to enrich hydrolytic haloarchaea from hypersaline salt lakes with neutral pH and from alkaline soda lakes. This resulted in isolation of a range of halo- and natrono-archaea, respectively, belonging to already described taxa as well as several new genus-level lineages. In some cases, the isolates enriched with different polysaccharides happened to be closely related, thus representing generalistic ecotype, while the others were narrow specialists. In general, soda lakes yielded a broader range of polysaccharide-utilizing specialists in comparison to neutral salt lakes. The results demonstrated a significant diversity of halo(natrono)archaea with a previously unrecognized potential for utilization of a broad range of natural polysaccharides in hypersaline habitats.

From Cancer Therapy to Winemaking: The Molecular Structure and Applications of β-Glucans and β-1, 3-Glucanases

β-glucans are a diverse group of polysaccharides composed of β-1,3 or β-(1,3-1,4) linked glucose monomers. They are mainly synthesized by fungi, plants, seaweed and bacteria, where they carry out structural, protective and energy storage roles. Because of their unique physicochemical properties, they have important applications in several industrial, biomedical and biotechnological processes. β-glucans are also major bioactive molecules with marked immunomodulatory and metabolic properties. As such, they have been the focus of many studies attesting to their ability to, among other roles, fight cancer, reduce the risk of cardiovascular diseases and control diabetes. The physicochemical and functional profiles of β-glucans are deeply influenced by their molecular structure. This structure governs β-glucan interaction with multiple β-glucan binding proteins, triggering myriad biological responses. It is then imperative to understand the structural properties of β-glucans to fully reveal their biological roles and potential applications. The deconstruction of β-glucans is a result of β-glucanase activity. In addition to being invaluable tools for the study of β-glucans, these enzymes have applications in numerous biotechnological and industrial processes, both alone and in conjunction with their natural substrates. Here, we review potential applications for β-glucans and β-glucanases, and explore how their functionalities are dictated by their structure.

Analysis and application of a suite of recombinant endo-β(1,3)-D-glucanases for studying fungal cell walls

Background

The fungal cell wall is an essential and robust external structure that protects the cell from the environment. It is mainly composed of polysaccharides with different functions, some of which are necessary for cell integrity. Thus, the process of fractionation and analysis of cell wall polysaccharides is useful for studying the function and relevance of each polysaccharide, as well as for developing a variety of practical and commercial applications. This method can be used to study the mechanisms that regulate cell morphogenesis and integrity, giving rise to information that could be applied in the design of new antifungal drugs. Nonetheless, for this method to be reliable, the availability of trustworthy commercial recombinant cell wall degrading enzymes with non-contaminating activities is vital.

Results

Here we examined the efficiency and reproducibility of 12 recombinant endo-β(1,3)-d-glucanases for specifically degrading the cell wall β(1,3)-d-glucan by using a fast and reliable protocol of fractionation and analysis of the fission yeast cell wall. This protocol combines enzymatic and chemical degradation to fractionate the cell wall into the four main polymers: galactomannoproteins, α-glucan, β(1,3)-d-glucan and β(1,6)-d-glucan. We found that the GH16 endo-β(1,3)-d-glucanase PfLam16A from Pyrococcus furiosus was able to completely and reproducibly degrade β(1,3)-d-glucan without causing the release of other polymers. The cell wall degradation caused by PfLam16A was similar to that of Quantazyme, a recombinant endo-β(1,3)-d-glucanase no longer commercially available. Moreover, other recombinant β(1,3)-d-glucanases caused either incomplete or excessive degradation, suggesting deficient access to the substrate or release of other polysaccharides.

Conclusions

The discovery of a reliable and efficient recombinant endo-β(1,3)-d-glucanase, capable of replacing the previously mentioned enzyme, will be useful for carrying out studies requiring the digestion of the fungal cell wall β(1,3)-d-glucan. This new commercial endo-β(1,3)-d-glucanase will allow the study of the cell wall composition under different conditions, along the cell cycle, in response to environmental changes or in cell wall mutants. Furthermore, this enzyme will also be greatly valuable for other practical and commercial applications such as genome research, chromosomes extraction, cell transformation, protoplast formation, cell fusion, cell disruption, industrial processes and studies of new antifungals that specifically target cell wall synthesis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01616-0.

Laminarans and 1,3-β-D-glucanases

The laminarans are biologically active water-soluble polysaccharide (1,3;1,6-β-D-glucans) of brown algae. These polysaccharides are an attractive object for research due to its relatively simple structure, low toxicity, and various biological effects. 1,3-β-D-glucanases are an effective tool for studying the structure of laminarans, and can also be used to obtain new biologically active derivatives. This review is to outline what is currently known about laminarans and enzymes that catalyze of their transformation. We focused on information about sources, structure and properties of laminarans and 1,3-β-D-glucanases, methods of obtaining and structural elucidation of laminarans, and biological activity of laminarans and products of their enzymatic transformation. It has an increased focus on the immunomodulating and anticancer activity of laminarans and their derivatives.

Molecular Basis for Substrate Recognition and Catalysis by a Marine Bacterial Laminarinase

Laminarin is an abundant algal polysaccharide that serves as carbon storage and fuel to meet the nutrition demands of heterotrophic microbes. Laminarin depolymerization catalyzed by microbial extracellular enzymes initiates remineralization, a key process in ocean biogeochemical cycles. Here, we described a glycoside hydrolase 16 (GH16) family laminarinase from a marine alga-associated Flavobacterium at the biochemical and structural levels. We found that the endolytic enzyme cleaved laminarin with a preference for β-1,3-glycoside linkages and showed transglycosylation activity across a broad range of acceptors. We also solved and compared high-resolution crystal structures of laminarinase in the apo form and in complex with β-1,3-tetrasaccharides, revealing an expanded catalytic cleft formed following substrate binding. Moreover, structure and mutagenesis studies identified multiple specific contacts between the enzyme and glucosyl residues essential for the substrate specificity for β-1,3-glucan. These results provide novel insights into the structural requirements for substrate binding and catalysis of GH16 family laminarinase, enriching our understanding of bacterial utilization of algal laminarin.IMPORTANCE Heterotrophic bacterial communities are key players in marine biogeochemical cycling due to their ability to remineralize organic carbon. Processing of complex organic matter requires heterotrophic bacteria to produce extracellular enzymes with precise specificity to depolymerize substrates to sizes sufficiently small for uptake. Thus, extracellular enzymatic hydrolysis initiates microbe-driven heterotrophic carbon cycling. In this study, based on biochemical and structural analyses, we revealed the depolymerization mechanism of β-1,3-glucan, a carbon reserve in algae, by laminarinase from an alga-associated marine Flavobacterium The findings provide new insights into the substrate recognition and catalysis of bacterial laminarinase and promote a better understanding of how extracellular enzymes are involved in organic matter cycling.

(Hyper)Thermophilic Enzymes: Production and Purification

The discovery of thermophilic and hyperthermophilic microorganisms, thriving at environmental temperatures near or above 100 °C, has revolutionized our ideas about the upper temperature limit at which life can exist. The characterization of (hyper)thermostable proteins has broadened our understanding and presented new opportunities for solving one of the most challenging problems in biophysics: how are structural stability and biological function maintained at high temperatures where "normal" proteins undergo dramatic structural changes? In our laboratory, we have purified and studied many thermostable and hyperthermostable proteins in an attempt to determine the molecular basis of heat stability. Here, we present methods to express such proteins and enzymes in E. coli and provide a general protocol for overproduction and purification. The ability to produce enzymes that retain their stability and activity at elevated temperatures creates exciting opportunities for a wide range of biocatalytic applications.

Biomass-degrading glycoside hydrolases of archaeal origin

During the last decades, the impact of hyperthermophiles and their enzymes has been intensively investigated for implementation in various high-temperature biotechnological processes. Biocatalysts of hyperthermophiles have proven to show extremely high thermo-activities and thermo-stabilities and are identified as suitable candidates for numerous industrial processes with harsh conditions, including the process of an efficient plant biomass pretreatment and conversion. Already-characterized archaea-originated glycoside hydrolases (GHs) have shown highly impressive features and numerous enzyme characterizations indicated that these biocatalysts show maximum activities at a higher temperature range compared to bacterial ones. However, compared to bacterial biomass-degrading enzymes, the number of characterized archaeal ones remains low. To discover new promising archaeal GH candidates, it is necessary to study in detail the microbiology and enzymology of extremely high-temperature habitats, ranging from terrestrial to marine hydrothermal systems. State-of-the art technologies such as sequencing of genomes and metagenomes and automated binning of genomes out of metagenomes, combined with classical microbiological culture-dependent approaches, have been successfully performed to detect novel promising biomass-degrading hyperthermozymes. In this review, we will focus on the detection, characterization and similarities of archaeal GHs and their unique characteristics. The potential of hyperthermozymes and their impact on high-temperature industrial applications have not yet been exhausted.

Structural insights into β-1,3-glucan cleavage by a glycoside hydrolase family

The fundamental and assorted roles of β-1,3-glucans in nature are underpinned on diverse chemistry and molecular structures, demanding sophisticated and intricate enzymatic systems for their processing. In this work, the selectivity and modes of action of a glycoside hydrolase family active on β-1,3-glucans were systematically investigated combining sequence similarity network, phylogeny, X-ray crystallography, enzyme kinetics, mutagenesis and molecular dynamics. This family exhibits a minimalist and versatile (α/β)-barrel scaffold, which can harbor distinguishing exo or endo modes of action, including an ancillary-binding site for the anchoring of triple-helical β-1,3-glucans. The substrate binding occurs via a hydrophobic knuckle complementary to the canonical curved conformation of β-1,3-glucans or through a substrate conformational change imposed by the active-site topology of some fungal enzymes. Together, these findings expand our understanding of the enzymatic arsenal of bacteria and fungi for the breakdown and modification of β-1,3-glucans, which can be exploited for biotechnological applications.

Modification of the glycolytic pathway in Pyrococcus furiosus and the implications for metabolic engineering

The key difference in the modified Embden-Meyerhof glycolytic pathway in hyperthermophilic Archaea, such as Pyrococcus furiosus, occurs at the conversion from glyceraldehyde-3-phosphate (GAP) to 3-phosphoglycerate (3-PG) where the typical intermediate 1,3-bisphosphoglycerate (1,3-BPG) is not present. The absence of the ATP-yielding step catalyzed by phosphoglycerate kinase (PGK) alters energy yield, redox energetics, and kinetics of carbohydrate metabolism. Either of the two enzymes, ferredoxin-dependent glyceraldehyde-3-phosphate ferredoxin oxidoreductase (GAPOR) or NADP⁺-dependent non-phosphorylating glyceraldehyde-3-phosphate dehydrogenase (GAPN), responsible for this "bypass" reaction, could be deleted individually without impacting viability, albeit with differences in native fermentation product profiles. Furthermore, P. furiosus was viable in the gluconeogenic direction (growth on pyruvate or peptides plus elemental sulfur) in a ΔgapnΔgapor strain. Ethanol was utilized as a proxy for potential heterologous products (e.g., isopropanol, butanol, fatty acids) that require reducing equivalents (e.g., NAD(P)H, reduced ferredoxin) generated from glycolysis. Insertion of a single gene encoding the thermostable NADPH-dependent primary alcohol dehydrogenase (adhA) (Tte_0696) from Caldanaerobacter subterraneus, resulted in a strain producing ethanol via the previously established aldehyde oxidoreductase (AOR) pathway. This strain demonstrated a high ratio of ethanol over acetate (> 8:1) at 80 °C and enabled ethanol production up to 85 °C, the highest temperature for bio-ethanol production reported to date.

Characterization of the GH16 and GH17 laminarinases from Vibrio breoganii 1C10

Laminarin is an abundant glucose polymer used as an energy reserve by micro- and macroalgae. Bacteria digest and consume laminarin with laminarinases. Their genomes frequently contain multiple homologs; however, the biological role for this replication remains unclear. We investigated the four laminarinases of glycoside hydrolase families GH16 and GH17 from the marine bacterium Vibrio breoganii 1C10, which can use laminarin as its sole carbon source. All four laminarinases employ an endolytic mechanism and specifically cleave the β-1,3-glycosidic bond. Two primarily produce low-molecular weight laminarin oligomers (DP 3-4) whereas the others primarily produce high-molecular weight oligomers (DP > 8), which suggests that these enzymes sequentially degrade laminarin. The results from this work provide an overview of the laminarinases from a single marine bacterium and also provide insights regarding how multiple laminarinases are used to degrade laminarin.

Comparative Analysis and Biochemical Characterization of Two Endo-β-1,3-Glucanases from the Thermophilic Bacterium Fervidobacterium sp

Laminarinases exhibit potential in a wide range of industrial applications including the production of biofuels and pharmaceuticals. In this study, we present the genetic and biochemical characteristics of FLamA and FLamB, two laminarinases derived from a metagenomic sample from a hot spring in the Azores. Sequence comparison revealed that both genes had high similarities to genes from Fervidobacterium nodosum Rt17-B1. The two proteins showed sequence similarities of 62% to each other and belong to the glycoside hydrolase (GH) family 16. For biochemical characterization, both laminarinases were heterologously produced in Escherichia coli and purified to homogeneity. FLamA and FLamB exhibited similar properties and both showed highest activity towards laminarin at 90 °C and pH 6.5. The two enzymes were thermostable but differed in their half-life at 80 °C with 5 h and 1 h for FLamA and FLamB, respectively. In contrast to other laminarinases, both enzymes prefer β-1,3-glucans and mixed-linked glucans as substrates. However, FLamA and FLamB differ in their catalytic efficiency towards laminarin. Structure predictions were made and showed minor differences particularly in a kink adjacent to the active site cleft. The high specific activities and resistance to elevated temperatures and various additives make both enzymes suitable candidates for application in biomass conversion.

Enzymatic properties and the gene structure of a cold-adapted laminarinase from Pseudoalteromonas species LA

We isolated a laminarin-degrading cold-adapted bacterium strain LA from coastal seawater in Sagami Bay, Japan and identified it as a Pseudoalteromonas species. We named the extracellular laminarinase LA-Lam, and purified and characterized it. LA-Lam showed high degradation activity for Laminaria digitata laminarin in the ranges of 15-50°C and pH 5.0-9.0. The major terminal products degraded from L. digitata laminarin with LA-Lam were glucose, laminaribiose, and laminaritriose. The degradation profile of laminarioligosaccharides with LA-Lam suggested that the enzyme has a high substrate binding ability toward tetrameric or larger saccharides. Our results of the gene sequence and the SDS-PAGE analyses revealed that the major part of mature LA-Lam is a catalytic domain that belongs to the GH16 family, although its precursor is composed of a signal peptide, the catalytic domain, and three-repeated unknown regions.

Laminarinase from Flavobacterium sp. reveals the structural basis of thermostability and substrate specificity

Laminarinase from Flavobacterium sp. strain UMI-01, a new member of the glycosyl hydrolase 16 family of a marine bacterium associated with seaweeds, mainly degrades β-1,3-glucosyl linkages of β-glucan (such as laminarin) through the hydrolysis of glycosidic bonds. We determined the crystal structure of ULam111 at 1.60-Å resolution to understand the structural basis for its thermostability and substrate specificity. A calcium-binding motif located on the opposite side of the β-sheet from catalytic cleft increased its degrading activity and thermostability. The disulfide bridge Cys31-Cys34, located on the β2-β3 loop near the substrate-binding site, is responsible for the thermostability of ULam111. The substrates of β-1,3-linked laminarin and β-1,3-1,4-linked glucan bound to the catalytic cleft in a completely different mode at subsite -3. Asn33 and Trp113, together with Phe212, formed hydrogen bonds with preferred substrates to degrade β-1,3-linked laminarin based on the structural comparisons. Our structural information provides new insights concerning thermostability and substrate recognition that will enable the design of industrial biocatalysts.

Endoglucanase activity at a second site in Pyrococcus furiosus triosephosphate isomerase-Promiscuity or compensation for a metabolic handicap?

The eight‐stranded (β/α)₈ barrel fold known as the Triosephosphate isomerase (TIM) barrel is the most commonly observed fold in enzymes, displaying an eightfold structural symmetry. The sequences and structures of different TIM barrel enzymes suggest that nature exploits the modularity inherent in the eightfold symmetry to generate enzymes with diverse enzymatic activities and, in certain cases, more than one catalytic activity per enzyme. Here, we report the discovery, verification, and characterization of such an additional activity, a novel endoglucanase/cellulase activity in what is otherwise a triosephosphate isomerase from the hyperthermophile archaeon Pyrococcus furiosus (PfuTIM). The activity is seen in two different ranges of temperatures, with one maximum at 40 °C and a second maximum close to 100 °C. The endoglucanase/cellulase activity is inhibited by norharman, a TIM inhibitor, which is suspected to bind at a site different to that of the regular substrate, glyceraldehyde‐3‐phosphate (G3P). However, endoglucanase/cellulose activity is not inhibited either by G3P analogs or by glycine‐scanning mutations involving residues in loops 1, 4, and 6 of PfuTIM, which are known to be important for TIM activity. It appears, therefore, that two different sites on PfuTIM are responsible for the observed TIM and endoglucanase activities. We discuss possible correlations between this discovery and certain unusual features of the glycolytic pathway in P. furiosus.

Enzyme

Pyrococcus furiosus Triosephosphate isomerase (EC:5.3.1.1)

Chaotropic heat treatment resolves native-like aggregation of a heterologously produced hyperthermostable laminarinase

Production of hyperthermostable enzymes in mesophilic hosts frequently causes undesired aggregation of these proteins. During production of Pyrococcus furiosus endo-β-1,3 glucanase (LamA) in Escherichia coli, soluble and insoluble species form. Here, the authors address the composition of this mixture, including the nature of LamA conformers, and establish a method to increase the yield of native monomer. With gel electrophoresis, size-exclusion chromatography, light scattering, circular dichroism and enzyme kinetics the authors show that approximately 50 % of heterologously produced LamA is soluble, and that 40 % of this fraction constitutes native-like oligomers and non-native monomers. Soluble oligomers display, like native LamA monomer, substrate inhibition, although with poor activity. Treatment of soluble oligomers with 3 M guanidinium hydrochloride at 80 °C yields up to 75 % properly active monomer. Non-native monomer shows low specific activity without substrate inhibition. Incubating non-native monomer with 3 M guanidinium hydrochloride at 80 °C causes formation of 25 % native LamA. Also, a large amount of insoluble LamA aggregates can be converted into soluble native monomer by application of this procedure. Thus, chaotropic heat treatment can improve the yield and quality of hyperthermostable proteins that form aberrant species during production in E. coli.

Complete genome sequence and transcriptomic analysis of a novel marine strain Bacillus weihaiensis reveals the mechanism of brown algae degradation

A novel marine strain representing efficient degradation ability toward brown algae was isolated, identified, and assigned to Bacillus weihaiensis Alg07. The alga-associated marine bacteria promote the nutrient cycle and perform important functions in the marine ecosystem. The de novo sequencing of the B. weihaiensis Alg07 genome was carried out. Results of gene annotation and carbohydrate-active enzyme analysis showed that the strain harbored enzymes that can completely degrade alginate and laminarin, which are the specific polysaccharides of brown algae. We also found genes for the utilization of mannitol, the major storage monosaccharide in the cell of brown algae. To understand the process of brown algae decomposition by B. weihaiensis Alg07, RNA-seq transcriptome analysis and qRT-PCR were performed. The genes involved in alginate metabolism were all up-regulated in the initial stage of kelp degradation, suggesting that the strain Alg07 first degrades alginate to destruct the cell wall so that the laminarin and mannitol are released and subsequently decomposed. The key genes involved in alginate and laminarin degradation were expressed in Escherichia coli and characterized. Overall, the model of brown algae degradation by the marine strain Alg07 was established, and novel alginate lyases and laminarinase were discovered.

Modulating the function of a β-1,3-glucanosyltransferase to that of an endo-β-1,3-glucanase by structure-based protein engineering

A glycoside hydrolase (GH) family 17 β-1,3-glucanosyltransferase (RmBgt17A) from Rhizomucor miehei CAU432 (CGMCC No. 4967) shared very low sequence homology (∼20 % identity) with that of other β-1,3-glucanases,despite their similar structural folds. Structural comparison and sequence alignment between RmBgt17A and GH family 17 β-1,3-glucanases suggested important roles for three residues (Tyr102, Trp157, and Glu158) located in the substrate-binding cleft of RmBgt17A in transglycosylation activity. A series of site-directed mutagenesis studies indicated that a single Glu-to-Ala mutation (E158A) modulates the function of RmBgt17A to that of a β-1,3-glucanase. Mutant E158A exhibited high hydrolytic activity (39.95 U/mg) toward reduced laminarin, 348.5-fold higher than the wild type. Optimal pH and temperature of the purified RmBgt17A-E158A were 4.5 and 55 °C, respectively. TLC analysis suggested that RmBgt17A-E158A is an endo-β-1,3-glucanase. Our study provides novel insight into protein engineering of the substrate-binding cleft of glycoside hydrolases to modulate the function of transglycosylation and hydrolysis.

Isolation and Characterization of the First Xylanolytic Hyperthermophilic Euryarchaeon Thermococcus sp. Strain 2319x1 and Its Unusual Multidomain Glycosidase

Enzymes from (hyper)thermophiles “Thermozymes” offer a great potential for biotechnological applications. Thermophilic adaptation does not only provide stability toward high temperature but is also often accompanied by a higher resistance to other harsh physicochemical conditions, which are also frequently employed in industrial processes, such as the presence of, e.g., denaturing agents as well as low or high pH of the medium. In order to find new thermostable, xylan degrading hydrolases with potential for biotechnological application we used an in situ enrichment strategy incubating Hungate tubes with xylan as the energy substrate in a hot vent located in the tidal zone of Kunashir Island (Kuril archipelago). Using this approach a hyperthermophilic euryarchaeon, designated Thermococcus sp. strain 2319x1, growing on xylan as sole energy and carbon source was isolated. The organism grows optimally at 85°C and pH 7.0 on a variety of natural polysaccharides including xylan, carboxymethyl cellulose (CMC), amorphous cellulose (AMC), xyloglucan, and chitin. The protein fraction extracted from the cells surface with Tween 80 exhibited endoxylanase, endoglucanase and xyloglucanase activities. The genome of Thermococcus sp. strain 2319x1 was sequenced and assembled into one circular chromosome. Within the newly sequenced genome, a gene, encoding a novel type of glycosidase (143 kDa) with a unique five-domain structure, was identified. It consists of three glycoside hydrolase (GH) domains and two carbohydrate-binding modules (CBM) with the domain order GH5-12-12-CBM2-2 (N- to C-terminal direction). The full length protein, as well as truncated versions, were heterologously expressed in Escherichia coli and their activity was analyzed. The full length multidomain glycosidase (MDG) was able to hydrolyze various polysaccharides, with the highest activity for barley β-glucan (β- 1,3/1,4-glucoside), followed by that for CMC (β-1,4-glucoside), cellooligosaccharides and galactomannan. The results reported here indicate that the modular MDG structure with multiple glycosidase and carbohydrate-binding domains not only extends the substrate spectrum, but also seems to allow the degradation of partially soluble and insoluble polymers in a processive manner. This report highlights the great potential in a multi-pronged approach consisting of a combined in situ enrichment, (comparative) genomics, and biochemistry strategy for the screening for novel enzymes of biotechnological relevance.

Crystal structural basis for Rv0315, an immunostimulatory antigen and inactive beta-1,3-glucanase of Mycobacterium tuberculosis

Mycobacterium tuberculosis (Mtb) remains a leading cause of morbidity and mortality worldwide, as two billion people are latently infected with Mtb. To address Mtb drug resistance and the limitations of current vaccines, the characteristics of candidate Mtb vaccines need to be explored. Here, we report the three-dimensional structure of Rv0315 at 1.70 Å resolution, a novel immunostimulatory antigen of Mtb, and demonstrate that Rv0315 is an inactive β-1,3-glucanase of the glycoside hydrolase 16 (GH16) family. Our study further elaborates the molecular basis for the lack of glucan recognition by Rv0315. Rv0315 has a large open groove, and this particular topology cannot bind oligosaccharide chains in solution, thus explaining the lack of detectable hydrolytic activity towards its substrate. Additionally, we identified Glu-176, a conserved catalytic residue in GH16 endo-β-1,3-glucanases, as essential for Rv0315 to induce immunological responses. These results indicate that Rv0315 likely diverged from a broad-specificity ancestral GH16 glucanase, and this inactive member of the GH16 family offers new insights into the GH16 glucanase. Together, our findings suggest that an inactive β-1,3-glucanase in Mtb drives T-helper 1 (Th1) immune responses, which may help develop more effective vaccines against Mtb infection.

ZmGns, a maize class I β-1,3-glucanase, is induced by biotic stresses and possesses strong antimicrobial activity

Plant β-1,3-glucanases are members of the pathogenesis-related protein 2 (PR-2) family, which is one of the 17 PR protein families and plays important roles in biotic and abiotic stress responses. One of the differentially expressed proteins (spot 842) identified in a recent proteomic comparison between five pairs of closely related maize (Zea mays L.) lines differing in aflatoxin resistance was further investigated in the present study. Here, the corresponding cDNA was cloned from maize and designated as ZmGns. ZmGns encodes a protein of 338 amino acids containing a potential signal peptide. The expression of ZmGns was detectible in all tissues studied with the highest level in silks. ZmGns was significantly induced by biotic stresses including three bacteria and the fungus Aspergillus flavus. ZmGns was also induced by most abiotic stresses tested and growth hormones including salicylic acid. In vivo, ZmGns showed a significant inhibitory activity against the bacterial pathogen Pseudomonas syringae pv. tomato DC3000 and fungal pathogen Botrytis cinerea when it overexpressed in Arabidopsis. Its high level of expression in the silk tissue and its induced expression by phytohormone treatment, as well as by bacterial and fungal infections, suggest it plays a complex role in maize growth, development, and defense.

(Hyper)thermophilic enzymes: production and purification

The discovery of thermophilic and hyperthermophilic microorganisms, thriving at environmental temperatures near or above 100 °C, has revolutionized our ideas about the upper temperature limit at which life can exist. The characterization of (hyper)thermostable proteins has broadened our understanding and presented new opportunities for solving one of the most challenging problems in biophysics: how is structural stability and biological function maintained at high temperatures where "normal" proteins undergo dramatic structural changes? In our laboratory we have purified and studied many thermostable and hyperthermostable proteins in an attempt to determine the molecular basis of heat stability. Here, we present methods to express such proteins and enzymes in E. coli and provide a general protocol for overproduction and purification. The ability to produce enzymes that retain their stability and activity at elevated temperatures creates exciting opportunities for a wide range of biocatalytic applications.

Bifunctional immobilization of a hyperthermostable endo-β-1,3-glucanase

Laminarinase A (LamA) from Pyrococcus furiosus is a hyperthermostable endo-β-1,3-glucanase (EC 3.2.1.39) belonging to the glycosyl hydrolase family GH16. Here, we report the two-step immobilization of LamA on macroporous acrylic epoxy beads, extra-functionalized with disulfide groups. To facilitate initial immobilization via thiol-disulfide exchange, we introduced, by site-directed mutagenesis, a superficial cysteine residue near the protein C-terminal end. The thus-obtained S296C variant showed similar catalytic properties as native LamA. The activity of immobilized S296C displayed an inverse relationship with particle size. Use of conventional beads (150-300 μm in diameter) obstructed the catalytic efficiency due to pore diffusion limitation of the polysaccharide substrate. Bifunctional attachment to milled beads (20-40 μm) resulted in high enzyme load and outstanding catalytic features. Bifunctional immobilized S296C showed extreme pH stability and could be repeatedly used at 60 °C without significant activity loss.

Two high-resolution structures of potato endo-1,3-β-glucanase reveal subdomain flexibility with implications for substrate binding

Endo-1,3-β-glucanases are widely distributed among bacteria, fungi and higher plants. They are responsible for hydrolysis of the glycosidic bond in specific polysaccharides with tracts of unsubstituted β-1,3-linked glucosyl residues. The plant enzymes belong to glycoside hydrolase family 17 (GH17) and are also members of class 2 of pathogenesis-related (PR) proteins. X-ray diffraction data were collected to 1.40 and 1.26 Å resolution from two crystals of endo-1,3-β-glucanase from Solanum tuberosum (potato, cultivar Désirée) which, despite having a similar packing framework, represented two separate crystal forms. In particular, they differed in the Matthews coefficient and are consequently referred to as higher density (HD; 1.40 Å resolution) and lower density (LD; 1.26 Å resolution) forms. The general fold of the protein resembles that of other known plant endo-1,3-β-glucanases and is defined by a (β/α)(8)-barrel with an additional subdomain built around the C-terminal half of the barrel. The structures revealed high flexibility of the subdomain, which forms part of the catalytic cleft. Comparison with structures of other GH17 endo-1,3-β-glucanases revealed differences in the arrangement of the secondary-structure elements in this region, which can be correlated with sequence variability and may suggest distinct substrate-binding patterns. The crystal structures revealed an unusual packing mode, clearly visible in the LD structure, caused by the presence of the C-terminal His(6) tag, which extends from the compact fold of the enzyme molecule and docks in the catalytic cleft of a neighbouring molecule. In this way, an infinite chain of His-tag-linked protein molecules is formed along the c direction.

The structure of the elicitor Cerato-platanin (CP), the first member of the CP fungal protein family, reveals a double ψβ-barrel fold and carbohydrate binding

Cerato-platanin (CP) is a secretion protein produced by the fungal pathogen Ceratocystis platani, the causal agent of the plane canker disease and the first member of the CP family. CP is considered a pathogen-associated molecular pattern because it induces various defense responses in the host, including production of phytoalexins and cell death. Although much is known about the properties of CP and related proteins as elicitors of plant defense mechanisms, its biochemical activity and host target(s) remain elusive. Here, we present the three-dimensional structure of CP. The protein, which exhibits a remarkable pH and thermal stability, has a double ψβ-barrel fold quite similar to those found in expansins, endoglucanases, and the plant defense protein barwin. Interestingly, although CP lacks lytic activity against a variety of carbohydrates, it binds oligosaccharides. We identified the CP region responsible for binding as a shallow surface located at one side of the β-barrel. Chemical shift perturbation of the protein amide protons, induced by oligo-N-acetylglucosamines of various size, showed that all the residues involved in oligosaccharide binding are conserved among the members of the CP family. Overall, the results suggest that CP might be involved in polysaccharide recognition and that the double ψβ-barrel fold is widespread in distantly related organisms, where it is often involved in host-microbe interactions.

Model organisms for genetics in the domain Archaea: methanogens, halophiles, Thermococcales and Sulfolobales

The tree of life is split into three main branches: eukaryotes, bacteria, and archaea. Our knowledge of eukaryotic and bacteria cell biology has been built on a foundation of studies in model organisms, using the complementary approaches of genetics and biochemistry. Archaea have led to some exciting discoveries in the field of biochemistry, but archaeal genetics has been slow to get off the ground, not least because these organisms inhabit some of the more inhospitable places on earth and are therefore believed to be difficult to culture. In fact, many species can be cultivated with relative ease and there has been tremendous progress in the development of genetic tools for both major archaeal phyla, the Euryarchaeota and the Crenarchaeota. There are several model organisms available for methanogens, halophiles, and thermophiles; in the latter group, there are genetic systems for Sulfolobales and Thermococcales. In this review, we present the advantages and disadvantages of working with each archaeal group, give an overview of their different genetic systems, and direct the neophyte archaeologist to the most appropriate model organism.

Molecular characterization and differential expression of beta-1,3-glucanase during ripening in banana fruit in response to ethylene, auxin, ABA, wounding, cold and light-dark cycles

beta-1,3-Glucanases (E.C. 3.2.1.39) are widely distributed enzyme among bacteria, fungi, and higher plants. Analyses of accumulation levels of beta-1,3-glucanase protein in various tissues in banana have clearly indicated abundance of beta-1,3-glucanase protein accumulation in ripe pulp tissue. After cloning of beta-1,3-glucanase from banana pulp (cultivar Cavendish), we have carried out an in silico analysis to investigate the sequential, structural, and phylogenetic characteristics of the putative banana beta-1,3-glucanase protein. As like other ripening specific genes, beta-1,3-glucanase is regulated in response to a wide variety of factors. Therefore, we have analyzed the transcript accumulation pattern and protein levels of beta-1,3-glucanase in response to ethylene, auxin, ABA, wounding and, low temperature in preclimacteric banana fruit. Expression profile analyses have indicated that whereas exogenous application of ethylene strongly stimulated beta-1,3-glucanase transcript accumulation, ABA partially induced the expression of the gene. On the other hand, wound treatment did not induce beta-1,3-glucanase expression. Conversely, auxin and cold treatment negatively regulated beta-1,3-glucanase gene expression and thus inhibited glucanase activity. In addition, beta-1,3-glucanase transcript level was markedly decreased by constant exposure to white light. Protein level and enzymatic activity of beta-1,3-glucanase were substantially increased with considerable decrease in fruit firmness by ethylene treatment and reduced exposure to white light conditions as compared with other treatments. Together, the overall study of beta-1,3-glucanase expression pattern, glucanase activity, and changes in fruit firmness during ripening in various conditions suggest the possible physiological function of beta-1,3-glucanase in fruit pulp softening.

NMR characterization of a 264-residue hyperthermostable endo-beta-1,3-glucanase

Insight into the hyperthermostable endo-beta-1,3-glucanase pfLamA from Pyrococcus furiosus is obtained by using NMR spectroscopy. pfLamA functions optimally at 104 degrees C and recently the X-ray structure of pfLamA has been obtained at 20 degrees C, a temperature at which the enzyme is inactive. In this study, near-complete (>99%) NMR assignments are presented of chemical shifts of pfLamA in presence and absence of calcium at 62 degrees C, a temperature at which the enzyme is biologically active. The protein contains calcium and the effects of calcium on the protein are assessed. Calcium binding results in relatively small chemical shift changes in a region distant from the active site of pfLamA and thus causes only minor conformational modifications. Removal of calcium does not significantly alter the denaturation temperature of pfLamA, implying that calcium does not stabilize the enzyme against global unfolding. The data obtained form the basis for elucidation of the molecular origins involved in conformational stability and biological activity of hyperthermophilic endo-beta-1,3-glucanases at extreme temperatures.

Metabolic versatility and indigenous origin of the archaeon Thermococcus sibiricus, isolated from a siberian oil reservoir, as revealed by genome analysis

Thermococcus species are widely distributed in terrestrial and marine hydrothermal areas, as well as in deep subsurface oil reservoirs. Thermococcus sibiricus is a hyperthermophilic anaerobic archaeon isolated from a well of the never flooded oil-bearing Jurassic horizon of a high-temperature oil reservoir. To obtain insight into the genome of an archaeon inhabiting the oil reservoir, we have determined and annotated the complete 1,845,800-base genome of T. sibiricus. A total of 2,061 protein-coding genes have been identified, 387 of which are absent in other members of the order Thermococcales. Physiological features and genomic data reveal numerous hydrolytic enzymes (e.g., cellulolytic enzymes, agarase, laminarinase, and lipases) and metabolic pathways, support the proposal of the indigenous origin of T. sibiricus in the oil reservoir, and explain its survival over geologic time and its proliferation in this habitat. Indeed, in addition to proteinaceous compounds known previously to be present in oil reservoirs at limiting concentrations, its growth was stimulated by cellulose, agarose, and triacylglycerides, as well as by alkanes. Two polysaccharide degradation loci were probably acquired by T. sibiricus from thermophilic bacteria following lateral gene transfer events. The first, a "saccharolytic gene island" absent in the genomes of other members of the order Thermococcales, contains the complete set of genes responsible for the hydrolysis of cellulose and beta-linked polysaccharides. The second harbors genes for maltose and trehalose degradation. Considering that agarose and laminarin are components of algae, the encoded enzymes and the substrate spectrum of T. sibiricus indicate the ability to metabolize the buried organic matter from the original oceanic sediment.

Cloning and functional characterization of a complex endo-beta-1,3-glucanase from Paenibacillus sp

A beta-1,3-glucanase gene, encoding a protein of 1,793 amino acids, was cloned from a strain of Paenibacillus sp. in this study. This large protein, designated as LamA, consists of many putative functional units, which include, from N to C terminus, a leader peptide, three repeats of the S-layer homologous module, a catalytic module of glycoside hydrolase family 16, four repeats of the carbohydrate-binding module of family CBM_4_9, and an analogue of coagulation factor Fa5/8C. Several truncated proteins, composed of the catalytic module with various organizations of the appended modules, were successfully expressed and characterized in this study. Data indicated that the catalytic module specifically hydrolyze beta-1,3- and beta-1,3-1,4-glucans. Also, laminaritriose was the major product upon endolytic hydrolysis of laminarin. The CBM repeats and Fa5/8C analogue substantially enhanced the hydrolyzing activity of the catalytic module, particularly toward insoluble complex substrates, suggesting their modulating functions in the enzymatic activity of LamA. Carbohydrate-binding assay confirmed the binding capabilities of the CBM repeats and Fa5/8C analogue to beta-1,3-, beta-1,3-1,4-, and even beta-1,4-glucans. These appended modules also enhanced the inhibition effect of the catalytic module on the growth of Candida albicans and Rhizoctonia solani.

Extremely thermophilic microorganisms for biomass conversion: status and prospects

Many microorganisms that grow at elevated temperatures are able to utilize a variety of carbohydrates pertinent to the conversion of lignocellulosic biomass to bioenergy. The range of substrates utilized depends on growth temperature optimum and biotope. Hyperthermophilic marine archaea (T(opt)>or=80 degrees C) utilize alpha- and beta-linked glucans, such as starch, barley glucan, laminarin, and chitin, while hyperthermophilic marine bacteria (T(opt)>or=80 degrees C) utilize the same glucans as well as hemicellulose, such as xylans and mannans. However, none of these organisms are able to efficiently utilize crystalline cellulose. Among the thermophiles, this ability is limited to a few terrestrial bacteria with upper temperature limits for growth near 75 degrees C. Deconstruction of crystalline cellulose by these extreme thermophiles is achieved by 'free' primary cellulases, which are distinct from those typically associated with large multi-enzyme complexes known as cellulosomes. These primary cellulases also differ from the endoglucanases (referred to here as 'secondary cellulases') reported from marine hyperthermophiles that show only weak activity toward cellulose. Many extremely thermophilic enzymes implicated in the deconstruction of lignocellulose can be identified in genome sequences, and many more promising biocatalysts probably remain annotated as 'hypothetical proteins'. Characterization of these enzymes will require intensive effort but is likely to generate new opportunities for the use of renewable resources as biofuels.

Crystal structure of a family 16 endoglucanase from the hyperthermophile Pyrococcus furiosus--structural basis of substrate recognition

Bacterial and archaeal endo-beta-1,3-glucanases that belong to glycoside hydrolase family 16 share a beta-jelly-roll fold, but differ significantly in sequence and in substrate specificity. The crystal structure of the laminarinase (EC 3.2.1.39) from the hyperthermophilic archaeon Pyrococcus furiosus (pfLamA) has been determined at 2.1 A resolution by molecular replacement. The pfLamA structure reveals a kink of six residues (72-77) at the entrance of the catalytic cleft. This peptide is absent in the endoglucanases from alkaliphilic Nocardiopsis sp. strain F96 and Bacillus macerans, two proteins displaying an overall fold similar to that of pfLamA, but with different substrate specificity. A deletion mutant of pfLamA, lacking residues 72-75, hydrolyses the mixed-linkage beta-1,3-1,4-glucan lichenan 10 times more efficiently than the wild-type protein, indicating the importance of the kink in substrate preference.

Kinetically controlled refolding of a heat-denatured hyperthermostable protein

The thermal denaturation of endo-beta-1,3-glucanase from the hyperthermophilic microorganism Pyrococcus furiosus was studied by calorimetry. The calorimetric profile revealed two transitions at 109 and 144 degrees C, corresponding to protein denaturation and complete unfolding, respectively, as shown by circular dichroism and fluorescence spectroscopy data. Calorimetric studies also showed that the denatured state did not refold to the native state unless the cooling temperature rate was very slow. Furthermore, previously denatured protein samples gave well-resolved denaturation transition peaks and showed enzymatic activity after 3 and 9 months of storage, indicating slow refolding to the native conformation over time.

Exploitation of the S-layer self-assembly system for site directed immobilization of enzymes demonstrated for an extremophilic laminarinase from Pyrococcus furiosus

A fusion protein based on the S-layer protein SbpA from Bacillus sphaericus CCM 2177 and the enzyme laminarinase (LamA) from Pyrococcus furiosus was designed and overexpressed in Escherichia coli. Due to the construction principle, the S-layer fusion protein fully retained the self-assembly capability of the S-layer moiety, while the catalytic domain of LamA remained exposed at the outer surface of the formed protein lattice. The enzyme activity of the S-layer fusion protein monolayer obtained upon recrystallization on silicon wafers, glass slides and different types of polymer membranes was determined colorimetrically and related to the activity of sole LamA that has been immobilized with conventional techniques. LamA aligned within the S-layer fusion protein lattice in a periodic and orientated fashion catalyzed twice the glucose release from the laminarin polysaccharide substrate in comparison to the randomly immobilized enzyme. In combination with the good shelf-life and the high resistance towards temperature and diverse chemicals, these novel composites are regarded a promising approach for site-directed enzyme immobilization.