Oxidation of the alpha(3)(betaD311C/R333C)(3)gamma subcomplex of the thermophilic Bacillus PS3 F(1)-ATPase indicates that only two beta subunits can exist in the closed conformation simultaneously

The alpha/beta interfaces of alpha(1)beta(1), alpha(3)beta(3), and F1: domain motions and elastic energy stored during gamma rotation

ATP synthase (F(o)F(1)) consists of F(1) (ATP-driven motor) and F(o) (H(+)-driven motor). F(1) is a complex of alpha(3)beta(3)gammadeltaepsilon subunits, and gamma is the rotating cam in alpha(3)beta(3). Thermophilic F(1) (TF(1)) is exceptional in that it can be crystallized as a beta monomer and an alpha(3)beta(3) oligomer, and it is sufficiently stable to allow alphabeta refolding and reassembly of hybrid complexes containing 1, 2, and 3 modified alpha or beta. The nucleotide-dependent open-close conversion of conformation is an inherent property of an isolated beta and energy and signals are transferred through alpha/beta interfaces. The catalytic and noncatalytic interfaces of both mitochondrial F(1) (MF(1)) and TF(1) were analyzed by an atom search within the limits of 0.40 nm across the alphabeta interfaces. Seven (plus thermophilic loop in TF(1)) contact areas are located at both the catalytic and noncatalytic interfaces on the open beta form. The number of contact areas on closed beta increased to 11 and 9, respectively, in the catalytic and noncatalytic interfaces. The interfaces in the barrel domain are immobile. The torsional elastic strain applied through the mobile areas is concentrated in hinge residues and the P-loop in beta. The notion of elastic energy in F(o)F(1) has been revised. X-ray crystallography of F(1) is a static snap shot of one state and the elastic hypotheses are still inconsistent with the structure, dyamics, and kinetics of F(o)F(1). The domain motion and elastic energy in F(o)F(1) will be elucidated by time-resolved crystallography.

Inhibitory Mg-ADP-fluoroaluminate complexes bound to catalytic sites of F(1)-ATPases: are they ground-state or transition-state analogs?

Schemes are proposed for coupling sequential opening and closing the three catalytic sites of F(1) to rotation of the gamma subunit during ATP synthesis and hydrolysis catalyzed by the F(o)F(1)-ATP synthase. A prominent feature of the proposed mechanisms is that the transition state during ATP synthesis is formed when a catalytic site is in the process of closing and that the transition state during ATP hydrolysis is formed when a catalytic site is in the process of opening. The unusual kinetics of formation of Mg-ADP-fluoroaluminate complexes in one or two catalytic sites of nucleotide-depleted MF(1) and wild-type and mutant alpha(3)beta(3)gamma subcomplexes of TF(1) are also reviewed. From these considerations, it is concluded that Mg-ADP-fluoroaluminate complexes formed at catalytic sites of isolated F(1)-ATPases or F(1) in membrane-bound F(o)F(1) are ground-state analogs.

Probing conformations of the beta subunit of F0F1-ATP synthase in catalysis

A subcomplex of F0F1-ATP synthase (F0F1), alpha3beta3gamma, was shown to undergo the conformation(s) during ATP hydrolysis in which two of the three beta subunits have the "Closed" conformation simultaneously (CC conformation) [S.P. Tsunoda, E. Muneyuki, T. Amano, M. Yoshida, H. Noji, Cross-linking of two beta subunits in the closed conformation in F1-ATPase, J. Biol. Chem. 274 (1999) 5701-5706]. This was examined by the inter-subunit disulfide cross-linking between two mutant beta(I386C)s that was formed readily only when the enzyme was in the CC conformation. Here, we adopted the same method for the holoenzyme F0F1 from Bacillus PS3 and found that the CC conformation was generated during ATP hydrolysis but barely during ATP synthesis. The experiments using F0F1 with the epsilon subunit lacking C-terminal helices further suggest that this difference is related to dynamic nature of the epsilon subunit and that ATP synthesis is accelerated when it takes the pathway involving the CC conformation.

F1-ATPase changes its conformations upon phosphate release

Motor proteins, myosin, and kinesin have gamma-phosphate sensors in the switch II loop that play key roles in conformational changes that support motility. Here we report that a rotary motor, F1-ATPase, also changes its conformations upon phosphate release. The tryptophan mutation was introduced into Arg-333 in the beta subunit of F1-ATPase from thermophilic Bacillus PS3 as a probe of conformational changes. This residue interacts with the switch II loop (residues 308-315) of the beta subunit in a nucleotide-bound conformation. The addition of ATP to the mutant F1 subcomplex alpha3beta(R333W)3gamma caused transient increase and subsequent decay of the Trp fluorescence. The increase was caused by conformational changes on ATP binding. The rate of decay agreed well with that of phosphate release monitored by phosphate-binding protein assays. This is the first evidence that the beta subunit changes its conformation upon phosphate release, which may share a common mechanism of exerting motility with other motor proteins.

The fluorescence spectrum of the introduced tryptophans in the alpha 3(beta F155W)3gamma subcomplex of the F1-ATPase from the thermophilic Bacillus PS3 cannot be used to distinguish between the number of nucleoside di- and triphosphates bound to catalytic sites

It has been reported that shifts in the fluorescence emission spectrum of the introduced tryptophans in the betaF155W mutant of Escherichia coli F(1) (bovine heart mitochondria F(1) residue number) can quantitatively distinguish between the number of catalytic sites occupied with ADP and ATP during steady-state ATP hydrolysis (Weber, J., Bowman, C., and Senior, A. E. (1996) J. Biol. Chem. 271, 18711--18718). In contrast, addition of MgADP, Mg-5'-adenylyl beta,gamma-imidophosphate (MgAMP-PNP), and MgATP in 1:1 ratios to the alpha(3)(betaF155W)(3)gamma subcomplex of thermophilic Bacillus PS3 F(1) (TF(1)) induced nearly identical blue shifts in the fluorescence emission maximum that was accompanied by quenching. Addition of 2 mm MgADP induced a slightly greater blue shift and a slight increase in intensity over those observed with 1:1 MgADP. However, addition of 2 mm MgAMP-PNP or MgATP induced a much greater blue shift and substantially enhanced fluorescence intensity over those observed in the presence of stoichiometric MgADP or MgAMP-PNP. It is clear from these results that the fluorescence spectrum of the introduced tryptophans in the betaF155W mutant of TF(1) does not respond in regular increments at any wavelength as catalytic sites are filled with nucleotides. The fluorescence spectrum observed after entrapping MgADP-fluoroaluminate complexes in two catalytic sites of the betaF155W subcomplex indicates that the fluorescence emission spectrum of the enzyme is maximally perturbed when nucleotides are bound to two catalytic sites. This finding is consistent with accumulating evidence suggesting that only two beta subunits in the alpha(3)beta(3)gamma subcomplex of TF(1) can simultaneously exist in the completely closed conformation.

ATP synthase--a marvellous rotary engine of the cell

ATP synthase can be thought of as a complex of two motors--the ATP-driven F1 motor and the proton-driven Fo motor--that rotate in opposite directions. The mechanisms by which rotation and catalysis are coupled in the working enzyme are now being unravelled on a molecular scale.

Large conformational changes of the epsilon subunit in the bacterial F1F0 ATP synthase provide a ratchet action to regulate this rotary motor enzyme

The F(1)F(0) ATP synthase is the smallest motor enzyme known. Previous studies had established that the central stalk, made of the gamma and epsilon subunits in the F(1) part and c subunit ring in the F(0) part, rotates relative to a stator composed of alpha(3)beta(3)deltaab(2) during ATP hydrolysis and synthesis. How this rotation is regulated has been less clear. Here, we show that the epsilon subunit plays a key role by acting as a switch of this motor. Two different arrangements of the epsilon subunit have been visualized recently. The first has been observed in beef heart mitochondrial F(1)-ATPase where the C-terminal portion is arranged as a two-alpha-helix hairpin structure that extends away from the alpha(3)beta(3) region, and toward the position of the c subunit ring in the intact F(1)F(0). The second arrangement was observed in a structure determination of a complex of the gamma and epsilon subunits of the Escherichia coli F(1)-ATPase. In this, the two C-terminal helices are apart and extend along the gamma to interact with the alpha and beta subunits in the intact complex. We have been able to trap these two arrangements by cross-linking after introducing appropriate Cys residues in E. coli F(1)F(0), confirming that both conformations of the epsilon subunit exist in the enzyme complex. With the C-terminal domain of epsilon toward the F(0), ATP hydrolysis is activated, but the enzyme is fully coupled in both ATP hydrolysis and synthesis. With the C-terminal domain toward the F(1) part, ATP hydrolysis is inhibited and yet the enzyme is fully functional in ATP synthesis; i.e., it works in one direction only. These results help explain the inhibitory action of the epsilon subunit in the F(1)F(0) complex and argue for a ratchet function of this subunit.

The role of the DELSEED motif of the beta subunit in rotation of F1-ATPase

F(1)-ATPase is a rotary motor protein, and ATP hydrolysis generates torque at the interface between the gamma subunit, a rotor shaft, and the alpha(3)beta(3) substructure, a stator ring. The region of conserved acidic "DELSEED" motif of the beta subunit has a contact with gamma subunit and has been assumed to be involved in torque generation. Using the thermophilic alpha(3)beta(3)gamma complex in which the corresponding sequence is DELSDED, we replaced each residue and all five acidic residues in this sequence with alanine. In addition, each of two conserved residues at the counterpart contact position of gamma subunit was also replaced. Surprisingly, all of these mutants rotated with as much torque as the wild-type. We conclude that side chains of the DELSEED motif of the beta subunit do not have a direct role in torque generation.

Substitution of betaGlu(201) in the alpha(3)beta(3)gamma subcomplex of the F(1)-ATPase from the thermophilic Bacillus PS3 increases the affinity of catalytic sites for nucleotides

In the crystal structure of bovine mitochondrial F(1)-ATPase (MF(1)) (Abrahams, J. P., Leslie, A. G. W., Lutter, R., and Walker, J. E. (1994) Nature 370, 621-628), the side chain oxygen of betaThr(163) interacts directly with Mg(2+) coordinated to 5'-adenylyl beta, gamma-imidodiphosphate or ADP bound to catalytic sites of beta subunits present in closed conformations. In the unliganded beta subunit present in an open conformation, the hydroxyl of betaThr(163) is hydrogen-bonded to the carboxylate of betaGlu(199). Substitution of betaGlu(201) (equivalent to betaGlu(199) in MF(1)) in the alpha(3)beta(3)gamma subcomplex of the F(1)-ATPase from the thermophilic Bacillus PS3 with cysteine or valine increases the propensity to entrap inhibitory MgADP in a catalytic site during hydrolysis of 50 microM ATP. These substitutions lower K(m3) (the Michaelis constant for trisite ATP hydrolysis) relative to that of the wild type by 25- and 10-fold, respectively. Fluorescence quenching of alpha(3)(betaE201C/Y341W)(3)gamma and alpha(3)(betaY341W)(3)gamma mutant subcomplexes showed that MgATP and MgADP bind to the third catalytic site of the double mutant with 8.4- and 4.4-fold higher affinity, respectively, than to the single mutant. These comparisons support the hypothesis that the hydrogen bond observed between the side chains of betaThr(163) and betaGlu(199) in the unliganded catalytic site in the crystal structure of MF(1) stabilizes the open conformation of the catalytic site during ATP hydrolysis.