Recruitment of class I hydrophobins to the air:water interface initiates a multi-step process of functional amyloid formation

Interface-mediated protein aggregation

The aggregation of proteins at interfaces has significant roles and can also lead to dysfunction of different physiological processes. The interfacial effects on the assembly and aggregation of biopolymers are not only crucial for a comprehensive understanding of protein biological functions, but also hold great potential for advancing the state-of-the-art applications of biopolymer materials. Recently, there has been remarkable progress in a collaborative context, as we strive to gain control over complex interfacial assembly structures of biopolymers. These biopolymer structures range from the nanoscale to mesoscale and even macroscale, and are attained through the rational design of interactions between biological building blocks and surfaces/interfaces. This review spotlights the recent advancements in interface-mediated assembly and properties of biopolymer materials. Initially, we introduce the solid-liquid interface (SIL)-mediated biopolymer assembly that includes the inorganic crystalline template effect and protein self-adoptive deposition through phase transition. Next, we display the advancement of biopolymer assembly instigated by the air-water interface (AWI) that acts as an energy conversion station. Lastly, we discuss succinctly the assembly of biopolymers at the liquid-liquid interface (LLI) along with their applications. It is our hope that this overview will stimulate the integration and progression of the science of interfacial assembled biopolymer materials and surfaces/interfaces.

Surface-Induced Hydrophobin Assemblies with Versatile Properties and Distinct Underlying Structures

Hydrophobins are remarkable proteins due to their ability to self-assemble into amphipathic coatings that reverse surface wettability. Here, the versatility of the Class I hydrophobins EASΔ15 and DewY in diverse nanosuspension and coating applications is demonstrated. The hydrophobins are shown to coat or emulsify a range of substrates including oil, hydrophobic drugs, and nanodiamonds and alter their solution and surface behavior. Surprisingly, while the coatings confer new properties, only a subset is found to be resistant to hot detergent treatment, a feature previously thought to be characteristic of the functional amyloid form of Class I hydrophobins. These results demonstrate that substrate surface properties can influence the molecular structures and physiochemical properties of hydrophobin and possibly other functional amyloids. Functional amyloid assembly with different substrates and conditions may be analogous to the propagation of different polymorphs of disease-associated amyloid fibrils with distinct structures, stability, and clinical phenotypes. Given that amyloid formation is not required for Class I hydrophobins to serve diverse applications, our findings open up new opportunities for their use in applications requiring a range of chemical and physical properties. In hydrophobin nanotechnological applications where high stability of assemblies is required, simultaneous structural and functional characterization should be carried out. Finally, while results in this study pertain to synthetic substrates, they raise the possibility that at least some members of the pseudo-Class I and Class III hydrophobins, reported to form assemblies with noncanonical properties, may be Class I hydrophobins adopting alternative structures in response to environmental cues.

Functional Amyloids: Where Supramolecular Amyloid Assembly Controls Biological Activity or Generates New Functionality

Functional amyloids are a rapidly expanding class of fibrillar protein structures, with a core cross-β scaffold, where novel and advantageous biological function is generated by the assembly of the amyloid. The growing number of amyloid structures determined at high resolution reveal how this supramolecular template both accommodates a wide variety of amino acid sequences and also imposes selectivity on the assembly process. The amyloid fibril can no longer be considered a generic aggregate, even when associated with disease and loss of function. In functional amyloids the polymeric β-sheet rich structure provides multiple different examples of unique control mechanisms and structures that are finely tuned to deliver assembly or disassembly in response to physiological or environmental cues. Here we review the range of mechanisms at play in natural, functional amyloids, where tight control of amyloidogenicity is achieved by environmental triggers of conformational change, proteolytic generation of amyloidogenic fragments, or heteromeric seeding and amyloid fibril stability. In the amyloid fibril form, activity can be regulated by pH, ligand binding and higher order protofilament or fibril architectures that impact the arrangement of associated domains and amyloid stability. The growing understanding of the molecular basis for the control of structure and functionality delivered by natural amyloids in nearly all life forms should inform the development of therapies for amyloid-associated diseases and guide the design of innovative biomaterials.

What makes functional amyloids work?

Although first described in the context of disease, cross-β (amyloid) fibrils have also been found as functional entities in all kingdoms of life. However, what are the specific properties of the cross-β fibril motif that convey biological function, make them especially suited for their particular purpose, and distinguish them from other fibrils found in biology? This review approaches these questions by arguing that cross-β fibrils are highly periodic, stable, and self-templating structures whose formation is accompanied by substantial conformational change that leads to a multimerization of their core and framing sequences. A discussion of each of these properties is followed by selected examples of functional cross-β fibrils that show how function is usually achieved by leveraging many of these properties.

Aspergillus Hydrophobins: Physicochemical Properties, Biochemical Properties, and Functions in Solid Polymer Degradation

Hydrophobins are small amphipathic proteins conserved in filamentous fungi. In this review, the properties and functions of Aspergillus hydrophobins are comprehensively discussed on the basis of recent findings. Multiple Aspergillus hydrophobins have been identified and categorized in conventional class I and two non-conventional classes. Some Aspergillus hydrophobins can be purified in a water phase without organic solvents. Class I hydrophobins of Aspergilli self-assemble to form amphipathic membranes. At the air–liquid interface, RolA of Aspergillus oryzae self-assembles via four stages, and its self-assembled films consist of two layers, a rodlet membrane facing air and rod-like structures facing liquid. The self-assembly depends mainly on hydrophobin conformation and solution pH. Cys4–Cys5 and Cys7–Cys8 loops, disulfide bonds, and conserved Cys residues of RodA-like hydrophobins are necessary for self-assembly at the interface and for adsorption to solid surfaces. AfRodA helps Aspergillus fumigatus to evade recognition by the host immune system. RodA-like hydrophobins recruit cutinases to promote the hydrolysis of aliphatic polyesters. This mechanism appears to be conserved in Aspergillus and other filamentous fungi, and may be beneficial for their growth. Aspergilli produce various small secreted proteins (SSPs) including hydrophobins, hydrophobic surface–binding proteins, and effector proteins. Aspergilli may use a wide variety of SSPs to decompose solid polymers.

Adsorption kinetics and self-assembled structures of Aspergillus oryzae hydrophobin RolA on hydrophobic and charged solid surfaces

Hydrophobins are small secreted amphipathic proteins ubiquitous among filamentous fungi. Hydrophobin RolA produced by Aspergillus oryzae attaches to solid surfaces, recruits polyesterase CutL1, and thus promotes hydrolysis of polyesters. Because the N-terminal region of RolA is involved in the interaction with CutL1, the orientation of RolA on the solid surface is important. However, the kinetic properties of RolA adsorption to solid surfaces with various chemical properties remain unclear, and RolA structures assembled after the attachment to surfaces are unknown. Using a quartz crystal microbalance (QCM), we analyzed the kinetic properties of RolA adsorption to the surfaces of QCM electrodes that had been chemically modified to become hydrophobic or charged. We also observed the assembled RolA structures on the surfaces by atomic force microscopy and performed molecular dynamics (MD) simulations of RolA adsorption to SAM-modified surfaces. The RolA-surface interaction was considerably affected by the zeta potential of RolA, which was affected by pH. The interactions of RolA with the surface seemed to be involved in the self-assembly of RolA. Three types of self-assembled structures of RolA were observed: spherical, rod-like, and mesh-like. The kinetics of RolA adsorption and the structures formed depended on the amount of RolA adsorbed, chemical properties of the electrode surface, and the pH of the buffer. Adsorption of RolA to solid surfaces seemed to depend mainly on its hydrophobic interaction with the surfaces; this was supported by MD simulations, which suggested that hydrophobic Cys-Cys loops of RolA attached to all SAM-modified surfaces at all pH. IMPORTANCE The adsorption kinetics of hydrophobins to solid surfaces and self-assembled structures formed by hydrophobin molecules have been studied mostly independently. In this report, we combined the kinetic analysis of hydrophobin RolA adsorption onto solid surfaces and observation of RolA self-assembly on these surfaces. Since RolA, whose isoelectric point is close to pH 4.0, showed higher affinity to the solid surfaces at pH 4.0 than at pH 7.0 or 10.0, the affinity of RolA to these surfaces depends mainly on hydrophobic interactions. Our combined analyses suggest that not only the adsorbed amount of RolA but also the chemical properties of the solid surfaces and the zeta potential of RolA affect the self-assembled RolA structures formed on these surfaces.

Class I hydrophobin fusion with cellulose binding domain for its soluble expression and facile purification

Hydrophobins, highly surface-active proteins, have the ability to reverse surface hydrophobicity through self-assembly at the hydrophilic-hydrophobic interfaces. Their unique structure and interfacial activity lead hydrophobins to have potential applications on surface functional modifications. However, class I hydrophobins are prone to self-assemble into highly insoluble amyloid-like rodlets structure. Recombinant hydrophobins could be produced by Escherichia coli but generally as an insoluble inclusion body. To overcome this insoluble expression limitation, cellulose-binding domain (CBD) from Clostridium thermocellum was fused to the N-terminal of class I hydrophobin HGFI to enhance its soluble expression in E. coli. Approximately, 94% of expressed CBD fused HGFI (CBD-HGFI) was found as soluble protein. The fused CBD could also bind specifically onto bacterial cellulose (BC) nanofibrils produced by Komagataeibacter xylinus to facilitate rapid isolation and purification of HGFI from crude extract. Lysostaphin (Lst), known as GlyGly endopeptidase could successfully cleave the flexible linker (GGGGS)₂ between CBD and HGFI to recover HGFI from BC-bound CBD-HGFI. CBD-HGFI purified by immobilized metal-chelated affinity chromatography (IMAC) and Lst cleaved BC-CBD-HGFI still retained interfacial activity of hydrophobin and its effect on accelerating PETase hydrolysis against poly(ethylene terephthalate) (PET) fiber.

The kinetics of islet amyloid polypeptide phase-separated system and hydrogel formation are critically influenced by macromolecular crowding

Many protein misfolding diseases (e.g. type II diabetes and Alzheimer's disease) are characterised by amyloid deposition. Human islet amyloid polypeptide (hIAPP, involved in type II diabetes) spontaneously undergoes liquid-liquid phase separation (LLPS) and a kinetically complex hydrogelation, both catalysed by hydrophobic-hydrophilic interfaces (e.g. air-water interface and/or phospholipids-water interfaces). Gelation of hIAPP phase-separated liquid droplets initiates amyloid aggregation and the formation of clusters of interconnected aggregates, which grow and fuse to eventually percolate the whole system. Droplet maturation into irreversible hydrogels via amyloid aggregation is thought to be behind the pathology of several diseases. Biological fluids contain a high volume fraction of macromolecules, leading to macromolecular crowding. Despite crowding agent addition in in vitro studies playing a significant role in changing protein phase diagrams, the mechanism underlying enhanced LLPS, and the effect(s) on stages beyond LLPS remain poorly or not characterised.We investigated the effect of macromolecular crowding and increased viscosity on the kinetics of hIAPP hydrogelation using rheology and the evolution of the system beyond LLPS by microscopy. We demonstrate that increased viscosity exacerbated the kinetic variability of hydrogelation and of the phase separated-aggregated system, whereas macromolecular crowding abolished heterogeneity. Increased viscosity also strengthened the gel meshwork and accelerated aggregate cluster fusion. In contrast, crowding either delayed cluster fusion onset (dextran) or promoted it (Ficoll). Our study highlights that an in vivo crowded environment would critically influence amyloid stages beyond LLPS and pathogenesis.

Amyloid and Amyloid-Like Aggregates: Diversity and the Term Crisis

Active accumulation of the data on new amyloids continuing nowadays dissolves boundaries of the term "amyloid". Currently, it is most often used to designate aggregates with cross-β structure. At the same time, amyloids also exhibit a number of other unusual properties, such as: detergent and protease resistance, interaction with specific dyes, and ability to induce transition of some proteins from a soluble form to an aggregated one. The same features have been also demonstrated for the aggregates lacking cross-β structure, which are commonly called "amyloid-like" and combined into one group, although they are very diverse. We have collected and systematized information on the properties of more than two hundred known amyloids and amyloid-like proteins with emphasis on conflicting examples. In particular, a number of proteins in membraneless organelles form aggregates with cross-β structure that are morphologically indistinguishable from the other amyloids, but they can be dissolved in the presence of detergents, which is not typical for amyloids. Such paradoxes signify the need to clarify the existing definition of the term amyloid. On the other hand, the demonstrated structural diversity of the amyloid-like aggregates shows the necessity of their classification.

Class I hydrophobins pretreatment stimulates PETase for monomers recycling of waste PETs

Poly(ethylene terephthalate) hydrolase (PETase) from Ideonella sakaiensis 201-F6 was expressed and purified from Escherichia coli to hydrolyze poly(ethylene terephthalate) (PET) fibers waste for its monomers recycling. Hydrolysis carried out at pH 8 and 30 °C was found to be the optimal condition based on measured monomer mono(2-hydroxyethyl) terephthalate (MHET) and terephthalic acid (TPA) concentrations after 24 h reaction. The intermediate product bis(2-hydroxyethyl) terephthalate (BHET) was a good substrate for PETase because BHET released from PET hydrolysis was efficiently converted into MHET. Only a trace amount of MHET could be further hydrolyzed to TPA. Class I hydrophobins RolA from Aspergillus oryzae and HGFI from Grifola frondosa were expressed and purified from E. coli to pretreat PET surface for accelerating PETase hydrolysis against PET. The weight loss of hydrolyzed PET increased from approximately 18% to 34% after hydrophobins pretreatment. The releases of TPA and MHET from HGFI-pretreated PET were enhanced 48% and 62%, respectively. The selectivity (TPA/MHET ratio) of the hydrolysis reaction was approximately 0.5.

Tuning Chain Relaxation from an Amorphous Biopolymer Film to Crystals by Removing Air/Water Interface Limitations

A promising route to the synthesis of protein-mimetic materials that are capable of strong mechanics and complex functions is provided by intermolecular β-sheet stacking. An understanding of the assembly mechanism on β-sheet stacking at molecular-level and the related influencing factors determine the potential to design polymorphs of such biomaterials towards broad applications. Herein, we quantitatively reveal the air/water interface (AWI) parameters regulating the transformation from crowding amorphous aggregates to ordered phase and show that the polymorph diversity of β-sheet stacking is regulated by the chain relaxation-crystallization mechanism. An amorphous macroscale amyloid-like nanofilm is formed at the AWI, in which unfolded protein chains are aligned in a short-range manner to form randomly packed β-sheets. The subsequent biopolymer chain relaxation-crystallization to form nanocrystals is further triggered by removing the limitations of energy and space at the AWI.

Adsorption layer formation in dispersions of protein aggregates

The review discusses recent results on the adsorption of amyloid fibrils and protein microgels at liquid/fluid interfaces. The application of the shear and dilational surface rheology, atomic force microscopy and passive particle probe tracking allowed for elucidating characteristic features of the protein aggregate adsorption while some proposed hypothesis still must be examined by special methods for structural characterization. Although the distinctions of the shear surface properties of dispersions of protein aggregates from the properties of native protein solutions are higher than the corresponding distinctions of the dilational surface properties, the latter ones give a possibility to obtain new information on the formation of fibril aggregates at the water/air interface. Only the adsorption of BLG microgels and fibrils was studied in some details. The kinetic dependencies of the dynamic surface tension and dilational surface elasticity for aqueous dispersions of protein globules, protein microgels and purified fibrils are similar if the system does not contain flexible macromolecules or flexible protein fragments. In the opposite case the kinetic dependencies of the dynamic surface elasticity can be non-monotonic. The solution pH influences strongly the dynamic surface properties of the dispersions of protein aggregates indicating that the adsorption kinetics is controlled by an electrostatic adsorption barrier if the pH deviates from the isoelectric point. A special section of the review considers the possibility to apply kinetic models of nanoparticle adsorption to the adsorption of protein aggregates.

Microbial functional amyloids serve diverse purposes for structure, adhesion and defence

The functional amyloid state of proteins has in recent years garnered much attention for its role in serving crucial and diverse biological roles. Amyloid is a protein fold characterised by fibrillar morphology, binding of the amyloid-specific dyes Thioflavin T and Congo Red, insolubility and underlying cross-β structure. Amyloids were initially characterised as an aberrant protein fold associated with mammalian disease. However, in the last two decades, functional amyloids have been described in almost all biological systems, from viruses, to bacteria and archaea, to humans. Understanding the structure and role of these amyloids elucidates novel and potentially ancient mechanisms of protein function throughout nature. Many of these microbial functional amyloids are utilised by pathogens for invasion and maintenance of infection. As such, they offer novel avenues for therapies. This review examines the structure and mechanism of known microbial functional amyloids, with a particular focus on the pathogenicity conferred by the production of these structures and the strategies utilised by microbes to interfere with host amyloid structures. The biological importance of microbial amyloid assemblies is highlighted by their ubiquity and diverse functionality.

Structure of proteins: Evolution with unsolved mysteries

Evolution of macromolecules could be considered as a milestone in the history of life. Nucleic acids are the long stretches of nucleotides that contain all the possible codes and information of life. On the other hand, proteins are their actual translated outcomes, or reflections of modifications in their structure that have occurred at a slow, but steady rate over a very long period of evolution. Over the years of research, biophysicists, biochemists, molecular and structural biologists have unfurled several layers of the structural convolutions in these chemical molecules; however evolutionists look over their structures through a different prism, which may or may not coincide with others. There remains a need to outline several well-known, but less discussed features of protein structures, like intrinsically disordered states, degron signals and different types of ubiquitin chains providing degradation signals, which help the cellular proteolytic machinery to identify and target the proteins towards degradation pathways. There are several important factors, which are critical for folding of proteins into their native three-dimensional conformations by the cytoplasmic chaperones; but in real time how the chaperones fold the newly synthesized polypeptide sequences into a particular three-dimensional shape within a fraction of second is still a mystery for biologists as well as mathematicians. Multiple similar unsolved or unaddressed questions need to be addressed in detail so that future line of research can dig deeper into the finer details of these structures of the proteins.

Assembly and disassembly of Aspergillus fumigatus conidial rodlets

The rodlet structure present on the Aspergillus fumigatus conidial surface hides conidia from immune recognition. In spite of the essential biological role of the rodlets, the molecular basis for their self-assembly and disaggregation is not known. Analysis of the soluble forms of conidia-extracted and recombinant RodA by NMR spectroscopy has indicated the importance of disulfide bonds and identified two dynamic regions as likely candidates for conformational change and intermolecular interactions during conversion of RodA into the amyloid rodlet structure. Point mutations introduced into the RODA sequence confirmed that (1) mutation of a single cysteine was sufficient to block rodlet formation on the conidial surface and (2) both presumed amyloidogenic regions were needed for proper rodlet assembly. Mutations in the two putative amyloidogenic regions retarded and disturbed, but did not completely inhibit, the formation of the rodlets in vitro and on the conidial surface. Even in a disturbed form, the presence of rodlets on the surface of the conidia was sufficient to immunosilence the conidium. However, in contrast to the parental conidia, long exposure of mutant conidia lacking disulfide bridges within RodA or expressing RodA carrying the double (I115S/I146G) mutation activated dendritic cells with the subsequent secretion of proinflammatory cytokines. The immune reactivity of the RodA mutant conidia was not due to a modification in the RodA structure, but to the exposure of different pathogen-associated molecular patterns on the surface as a result of the modification of the rodlet surface layer. The full degradation of the rodlet layer, which occurs during early germination, is due to a complex array of cell wall bound proteases. As reported earlier, this loss of the rodlet layer lead to a strong anti-fumigatus host immune response in mouse lungs.

In vivo localization of human acetylcholinesterase-derived species in a β-sheet conformation at the core of senile plaques in Alzheimer's disease

Many neurodegenerative diseases are characterized by amyloid deposition. In Alzheimer's disease (AD), β-amyloid (Aβ) peptides accumulate extracellularly in senile plaques. The AD amyloid cascade hypothesis proposes that Aβ production or reduced clearance leads to toxicity. In contrast, the cholinergic hypothesis argues for a specific pathology of brain cholinergic pathways. However, neither hypothesis in isolation explains the pattern of AD pathogenesis. Evidence suggests that a connection exists between these two scenarios: the synaptic form of human acetylcholinesterase (hAChE-S) associates with plaques in AD brains; among hAChE variants, only hAChE-S enhances Aβ fibrillization in vitro and Aβ deposition and toxicity in vivo Only hAChE-S contains an amphiphilic C-terminal domain (T40, AChE_575-614), with AChE_586-599 homologous to Aβ and forming amyloid fibrils, which implicates T40 in AD pathology. We previously showed that the amyloid scavenger, insulin-degrading enzyme (IDE), generates T40-derived amyloidogenic species that, as a peptide mixture, seed Aβ fibrillization. Here, we characterized 11 peptides from a T40-IDE digest for β-sheet conformation, surfactant activity, fibrillization, and seeding capability. We identified residues important for amyloidogenicity and raised polyclonal antibodies against the most amyloidogenic peptide. These new antisera, alongside other specific antibodies, labeled sections from control, hAChE-S, hAPPswe, and hAChE-S/hAPPswe transgenic mice. We observed that hAChE-S β-sheet species co-localized with Aβ in mature plaque cores, surrounded by hAChE-S α-helical species. This observation provides the first in vivo evidence of the conformation of hAChE-S species within plaques. Our results may explain the role of hAChE-S in Aβ deposition and aggregation, as amyloidogenic hAChE-S β-sheet species might seed Aβ aggregation.

Functional amyloid materials at surfaces/interfaces

With the development of nanotechnology, functional amyloid materials are drawing increasing attention, and numerous remarkable applications are emerging. Amyloids, defined as a class of supramolecular assemblies of misfolded proteins or peptides into β-sheet fibrils, have evolved in many new respects and offer abundant chemical/biological functions. These proteinaceous micro/nano-structures provide excellent biocompatibility, rich phase behaviours, strong mechanical properties, and stability at interfaces not only in nature but also in functional materials, displaying versatile interactions with surfaces/interfaces that have been widely adopted in bioadhesion, synthetic biology, and composites. Overall, functional amyloids at surfaces/interfaces have excellent potential applications in next-generation biotechnology and biomaterials.

Comparative analysis of surface coating properties of five hydrophobins from Aspergillus nidulans and Trichoderma reseei

Fungal hydrophobins are small amphiphilic proteins that self-assemble into monolayers on hydrophobic:hydrophilic interfaces and can be used for surface coatings. Because e.g. Aspergillus nidulans contains six different hydrophobins, it is likely that they have different properties and are used for different “applications” in the fungus. We established a method for recombinant production of different class hydrophobins in Escherichia coli. We produced DewA, DewC, DewD, DewE from A. nidulans and HFBI from Trichoderma reesei and compared surface coating properties of these hydrophobins. All tested proteins formed coatings on glass, strongly increasing the hydrophobicity of the surface, and showed emulsion-stabilizing properties. But whereas the typical class I hydrophobin DewA formed the most stable coating on glass, the intermediate class hydrophobins DewE and DewD were more effective in stabilization of oil:water emulsions. This work gives insights into correlations between structural characteristics of hydrophobins and their behaviour as surface binding agents. It could help with the clarification of their biological functions and lead to novel biotechnological applications.

Probing Structural Changes during Self-assembly of Surface-Active Hydrophobin Proteins that Form Functional Amyloids in Fungi

Hydrophobins are amphiphilic proteins secreted by filamentous fungi in a soluble form, which can self-assemble at hydrophilic/hydrophobic or water/air interfaces to form amphiphilic layers that have multiple biological roles. We have investigated the conformational changes that occur upon self-assembly of six hydrophobins that form functional amyloid fibrils with a rodlet morphology. These hydrophobins are present in the cell wall of spores from different fungal species. From available structures and NMR chemical shifts, we established the secondary structures of the monomeric forms of these proteins and monitored their conformational changes upon amyloid rodlet formation or thermal transitions using synchrotron radiation circular dichroism and Fourier-transform infrared spectroscopy (FT-IR). Thermal transitions were followed by synchrotron radiation circular dichroism in quartz cells that allowed for microbubbles and hence water/air interfaces to form and showed irreversible conformations that differed from the rodlet state for most of the proteins. In contrast, thermal transitions on hermetic calcium fluoride cells showed reversible conformational changes. Heating hydrophobin solutions with a water/air interface on a silicon crystal surface in FT-IR experiments resulted in a gain in β-sheet content typical of amyloid fibrils for all except one protein. Rodlet formation was further confirmed by electron microscopy. FT-IR spectra of pre-formed hydrophobin rodlet preparations also showed a gain in β-sheet characteristic of the amyloid cross-β structure. Our results indicate that hydrophobins are capable of significant conformational plasticity and the nature of the assemblies formed by these surface-active proteins is highly dependent on the interface at which self-assembly takes place.

Self-assembly of two hydrophobins from marine fungi affected by interaction with surfaces

Hydrophobins are amphiphilic fungal proteins endowed with peculiar characteristics, such as a high surface activity and an interface triggered self-assembly. Several applications of these proteins have been proposed in the food, cosmetics and biomedical fields. Moreover, their use as proteinaceous coatings can be effective for materials and nanomaterials applications. The discovery of novel hydrophobins with diverse properties may be advantageous from both the scientific and industrial points of view. Stressful environmental conditions of fungal growth may induce the production of proteins with peculiar features. Two Class I hydrophobins from fungi isolated from marine environment have been recently purified. Herein, their propensity to aggregate forming nanometric fibrillar structures has been compared, using different techniques, such as circular dichroism, dynamic light scattering and Thioflavin T fluorescence assay. Furthermore, TEM and AFM images indicate that the interaction of these proteins with specific surfaces, are crucial in the formation of amyloid fibrils and in the assembly morphologies. These self-assembling proteins show promising properties as bio-coating for different materials via a green process. Biotechnol. Bioeng. 2017;114: 2173-2186. © 2017 Wiley Periodicals, Inc.

Immobilization of LccC Laccase from Aspergillus nidulans on Hard Surfaces via Fungal Hydrophobins

Fungal hydrophobins are small amphiphilic proteins that can be used for coatings on hydrophilic and hydrophobic surfaces. Through the formation of monolayers, they change the hydrophobicity of a given surface. Especially, the class I hydrophobins are interesting for biotechnology, because their layers are stable at high temperatures and can only be removed with strong solvents. These proteins self-assemble into monolayers under physiological conditions and undergo conformational changes that stabilize the layer structure. Several studies have demonstrated how the fusion of hydrophobins with short peptides allows the specific modification of the properties of a given surface or have increased the protein production levels through controlled localization of hydrophobin molecules inside the cell. Here, we fused the Aspergillus nidulans laccase LccC to the class I hydrophobins DewA and DewB and used the fusion proteins to functionalize surfaces with immobilized enzymes. In contrast to previous studies with enzymes fused to class II hydrophobins, the DewA-LccC fusion protein is secreted into the culture medium. The crude culture supernatant was directly used for coatings of glass and polystyrene without additional purification steps. The highest laccase surface activity was achieved after protein immobilization on modified hydrophilic polystyrene at pH 7. This study presents an easy-to-use alternative to classical enzyme immobilization techniques and can be applied not only for laccases but also for other biotechnologically relevant enzymes.

IMPORTANCE

Although fusion with small peptides to modify hydrophobin properties has already been performed in several studies, fusion with an enzyme presents a more challenging task. Both protein partners need to remain in active form so that the hydrophobins can interact with one another and form layers, and so the enzyme (e.g., laccase) will remain active at the same time. Also, because of the amphiphilic nature of hydrophobins, their production and purification remain challenging so far and often include steps that would irreversibly disrupt most enzymes. In our study, we present the first functional fusion proteins of class I hydrophobins from A. nidulans with a laccase. The resulting fusion enzyme is directly secreted into the culture medium by the fungus and can be used for the functionalization of hard surfaces.

Dynamics of the formation of a hydrogel by a pathogenic amyloid peptide: islet amyloid polypeptide

Many chronic degenerative diseases result from aggregation of misfolded polypeptides to form amyloids. Many amyloidogenic polypeptides are surfactants and their assembly can be catalysed by hydrophobic-hydrophilic interfaces (an air-water interface in-vitro or membranes in-vivo). We recently demonstrated the specificity of surface-induced amyloidogenesis but the mechanisms of amyloidogenesis and more specifically of adsorption at hydrophobic-hydrophilic interfaces remain poorly understood. Thus, it is critical to determine how amyloidogenic polypeptides behave at interfaces. Here we used surface tensiometry, rheology and electron microscopy to demonstrate the complex dynamics of gelation by full-length human islet amyloid polypeptide (involved in type II diabetes) both in the bulk solution and at hydrophobic-hydrophilic interfaces (air-water interface and phospholipids). We show that the hydrogel consists of a 3D supramolecular network of fibrils. We also assessed the role of solvation and dissected the evolution over time of the assembly processes. Amyloid gelation could have important pathological consequences for membrane integrity and cellular functions.

Fusion to Hydrophobin HFBI Improves the Catalytic Performance of a Cytochrome P450 System

Cytochrome P450 monooxygenases (P450) are heme-containing enzymes that oxidize a broad range of substrates in the presence of molecular oxygen and NAD(P)H. For their activity, most P450s rely on one or two redox proteins responsible for the transfer of electrons from the cofactor NAD(P)H to the heme. One of the challenges when using P450s in vitro, especially when non-physiological redox proteins are applied, is the inefficient transfer of electrons between the individual proteins resulting in non-productive consumption of NAD(P)H - referred to as uncoupling. Herein, we describe the improvement of the coupling efficiency between a P450 and its redox partner - diflavin reductase - by fusing both enzymes individually to the hydrophobin HFBI - a small self-assembling protein of the fungus Trichoderma reesei. The separated monooxygenase (BMO) and reductase (BMR) domains of P450 BM3 from Bacillus megaterium were chosen as a P450-reductase model system and individually fused to HFBI. The fusion proteins could be expressed in soluble form in Escherichia coli. When HFBI-fused BMO and BMR were mixed in vitro, substantially higher coupling efficiencies were measured as compared with the respective non-fused enzymes. Consequently, myristic acid conversion increased up to 20-fold (after 6 h) and 5-fold (after 24 h). Size exclusion chromatography demonstrated that in vitro the hydrophobin-fused enzymes build multimeric protein assemblies. Thus, the higher activity is hypothesized to be due to HFBI-mediated self-assembly arranging BMO and BMR in close spatial proximity in aqueous solution.

The Diverse Structures and Functions of Surfactant Proteins

Surface tension at liquid–air interfaces is a major barrier that needs to be surmounted by a wide range of organisms; surfactant and interfacially active proteins have evolved for this purpose. Although these proteins are essential for a variety of biological processes, our understanding of how they elicit their function has been limited. However, with the recent determination of high-resolution 3D structures of several examples, we have gained insight into the distinct shapes and mechanisms that have evolved to confer interfacial activity. It is now a matter of harnessing this information, and these systems, for biotechnological purposes.

Interfacially active proteins fulfill a wide range of biological functions in organisms ranging from bacteria and fungi to mammals.

Their physicochemical properties make interfacially active proteins attractive for biotechnological applications; for example, as coatings on nanodevices or medical implants and as emulsifiers in food and personal-care products.

High-resolution 3D structures show that the mechanisms by which interfacially active proteins achieve their function are highly diverse.

Self-assembly of MPG1, a hydrophobin protein from the rice blast fungus that forms functional amyloid coatings, occurs by a surface-driven mechanism

Rice blast is a devastating disease of rice caused by the fungus Magnaporthe oryzae and can result in loss of a third of the annual global rice harvest. Two hydrophobin proteins, MPG1 and MHP1, are highly expressed during rice blast infections. These hydrophobins have been suggested to facilitate fungal spore adhesion and to direct the action of the enzyme cutinase 2, resulting in penetration of the plant host. Therefore a mechanistic understanding of the self-assembly properties of these hydrophobins and their interaction with cutinase 2 is crucial for the development of novel antifungals. Here we report details of a study of the structure, assembly and interactions of these proteins. We demonstrate that, in vitro, MPG1 assembles spontaneously into amyloid structures while MHP1 forms a non-fibrillar film. The assembly of MPG1 only occurs at a hydrophobic:hydrophilic interface and can be modulated by MHP1 and other factors. We further show that MPG1 assemblies can much more effectively retain cutinase 2 activity on a surface after co-incubation and extensive washing compared with other protein coatings. The assembly and interactions of MPG1 and MHP1 at hydrophobic surfaces thereby provide the basis for a possible mechanism by which the fungus can develop appropriately at the infection interface.

Hydrophobin-Based Surface Engineering for Sensitive and Robust Quantification of Yeast Pheromones

Detection and quantification of small peptides, such as yeast pheromones, are often challenging. We developed a highly sensitive and robust affinity-assay for the quantification of the α-factor pheromone of Saccharomyces cerevisiae based on recombinant hydrophobins. These small, amphipathic proteins self-assemble into highly stable monolayers at hydrophilic-hydrophobic interfaces. Upon functionalization of solid supports with a combination of hydrophobins either lacking or exposing the α-factor, pheromone-specific antibodies were bound to the surface. Increasing concentrations of the pheromone competitively detached the antibodies, thus allowing for quantification of the pheromone. By adjusting the percentage of pheromone-exposing hydrophobins, the sensitivity of the assay could be precisely predefined. The assay proved to be highly robust against changes in sample matrix composition. Due to the high stability of hydrophobin layers, the functionalized surfaces could be repeatedly used without affecting the sensitivity. Furthermore, by using an inverse setup, the sensitivity was increased by three orders of magnitude, yielding a novel kind of biosensor for the yeast pheromone with the lowest limit of detection reported so far. This assay was applied to study the pheromone secretion of diverse yeast strains including a whole-cell biosensor strain of Schizosaccharomyces pombe modulating α-factor secretion in response to an environmental signal.

(1)H, (13)C and (15)N resonance assignments of the RodA hydrophobin from the opportunistic pathogen Aspergillus fumigatus

Hydrophobins are fungal proteins characterised by their amphipathic properties and an idiosyncratic pattern of eight cysteine residues involved in four disulphide bridges. The soluble form of these proteins spontaneously self-assembles at hydrophobic/hydrophilic interfaces to form an amphipathic monolayer. The RodA hydrophobin of the opportunistic pathogen Aspergillus fumigatus forms an amyloid layer with a rodlet morphology that covers the surface of fungal spores. This rodlet layer bestows hydrophobicity to the spores facilitating their dispersal in the air and rendering the conidia inert relative to the human immune system. As a first step in the analysis of the solution structure and self-association of RodA, we report the (1)H, (13)C and (15)N resonance assignments of the soluble monomeric form of RodA.

Molecular mechanisms involved in Bacillus subtilis biofilm formation

Biofilms are the predominant lifestyle of bacteria in natural environments, and they severely impact our societies in many different fashions. Therefore, biofilm formation is a topic of growing interest in microbiology, and different bacterial models are currently studied to better understand the molecular strategies that bacteria undergo to build biofilms. Among those, biofilms of the soil-dwelling bacterium Bacillus subtilis are commonly used for this purpose. Bacillus subtilis biofilms show remarkable architectural features that are a consequence of sophisticated programmes of cellular specialization and cell-cell communication within the community. Many laboratories are trying to unravel the biological role of the morphological features of biofilms, as well as exploring the molecular basis underlying cellular differentiation. In this review, we present a general perspective of the current state of knowledge of biofilm formation in B. subtilis and thereby placing a special emphasis on summarizing the most recent discoveries in the field.

Applications of hydrophobins: current state and perspectives

Hydrophobins are proteins exclusively produced by filamentous fungi. They self-assemble at hydrophilic-hydrophobic interfaces into an amphipathic film. This protein film renders hydrophobic surfaces of gas bubbles, liquids, or solid materials wettable, while hydrophilic surfaces can be turned hydrophobic. These properties, among others, make hydrophobins of interest for medical and technical applications. For instance, hydrophobins can be used to disperse hydrophobic materials; to stabilize foam in food products; and to immobilize enzymes, peptides, antibodies, cells, and anorganic molecules on surfaces. At the same time, they may be used to prevent binding of molecules. Furthermore, hydrophobins have therapeutic value as immunomodulators and can been used to produce recombinant proteins.

The functional role of Cys3-Cys4 loop in hydrophobin HGFI

Hydrophobins are a large group of low-molecular weight proteins. These proteins are highly surface-active and can form amphipathic membranes by self-assembling at hydrophobic-hydrophilic interfaces. Based on physical properties and hydropathy profiles, hydrophobins are divided into two classes. Upon the analysis of amino acid sequences and higher structures, some models suggest that the Cys3-Cys4 loop regions in class I and II hydrophobins can exhibit remarkable difference in their alignment and conformation, and have a critical role in the rodlets structure formation. To examine the requirement for the Cys3-Cys4 loop in class I hydrophobins, we used protein fusion technology to obtain a mutant protein HGFI-AR by replacing the amino acids between Cys3 and Cys4 of the class I hydrophobin HGFI from Grifola frondosa with those ones between Cys3 and Cys4 of the class II hydrophobin HFBI from Trichoderma reesei. The gene of the mutant protein HGFI-AR was successfully expressed in Pichia pastoris. Water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS) measurements demonstrated that the purified HGFI-AR could form amphipathic membranes by self-assembling at mica and hydrophobic polystyrene surfaces. This property enabled them to alter the surface wettabilities of polystyrene and mica and change the elemental composition of siliconized glass. In comparison to recombinant class I hydrophobin HGFI (rHGFI), the membranes formed on hydrophobic surfaces by HGFI-AR were not robust enough to resist 1 % hot SDS washing. Atomic force microscopy (AFM) measurements indicated that unlike rHGFI, no rodlet structure was observed on the mutant protein HGFI-AR coated mica surface. In addition, when compared to rHGFI, no secondary structural change was detected by Circular Dichroism (CD) spectroscopy after HGFI-AR self-assembled at the water-air interface. HGFI-AR could not either be deemed responsible for the fluorescence intensity increase of Thioflavin T (THT) and the Congo Red (CR) absorption spectra shift (after the THT(CR)/HGFI-AR mixed aqueous solution was drastically vortexed). Remarkably, replacement of the Cys3-Cys4 loop could impair the rodlet formation of the class I hydrophobin HGFI. So, it could be speculated that the Cys3-Cys4 loop plays an important role in conformation and functionality, when the class I hydrophobin HGFI self-assembles at hydrophobic-hydrophilic interfaces.

Fungal Hydrophobin Proteins Produce Self-Assembling Protein Films with Diverse Structure and Chemical Stability

Hydrophobins are small proteins secreted by fungi and which spontaneously assemble into amphipathic layers at hydrophilic-hydrophobic interfaces. We have examined the self-assembly of the Class I hydrophobins EAS_∆15 and DewA, the Class II hydrophobin NC2 and an engineered chimeric hydrophobin. These Class I hydrophobins form layers composed of laterally associated fibrils with an underlying amyloid structure. These two Class I hydrophobins, despite showing significant conformational differences in solution, self-assemble to form fibrillar layers with very similar structures and require a hydrophilic-hydrophobic interface to trigger self-assembly. Addition of additives that influence surface tension can be used to manipulate the fine structure of the protein films. The Class II hydrophobin NC2 forms a mesh-like protein network and the engineered chimeric hydrophobin displays two multimeric forms, depending on assembly conditions. When formed on a graphite surface, the fibrillar EAS_∆15 layers are resistant to alcohol, acid and basic washes. In contrast, the NC2 Class II monolayers are dissociated by alcohol treatment but are relatively stable towards acid and base washes. The engineered chimeric Class I/II hydrophobin shows increased stability towards alcohol and acid and base washes. Self-assembled hydrophobin films may have extensive applications in biotechnology where biocompatible; amphipathic coatings facilitate the functionalization of nanomaterials.

The presence of an air-water interface affects formation and elongation of α-Synuclein fibrils

The aggregation of human α-Synuclein (α-Syn) into amyloid fibrils is related to the onset of multiple diseases termed synucleinopathies. Substantial evidence suggests that hydrophobic-hydrophilic interfaces promote the aggregation of amyloidogenic proteins and peptides in vitro. In this work the effect of the air-water interface (AWI) on α-Syn aggregation is investigated by means of thioflavin T binding measurements, dynamic light scattering, size-exclusion chromatography, electron microscopy, and atomic force microscopy. Measurements were performed with the monomeric protein alone or together with preformed seeds. In presence of the AWI, α-Syn aggregates readily into amyloid fibrils that remain adsorbed to the AWI. Instead, when the AWI is removed from the samples by replacing it with a solid-liquid interface, the interfacial aggregation of monomeric α-Syn is greatly reduced and no significant increase in ThT fluorescence is detected in the bulk, even at 900 μM concentration. Bulk aggregation is observed only when a sufficient amount of preformed seeds is added, and the initial slope of the kinetics scales with the amount of seeds as expected for first order kinetics. By contrast, in seeded experiments with the AWI, the initial slope is one order of magnitude lower and secondary nucleation pathways appear instead to be dominant. Thus, interfaces play multiple roles in the aggregation of α-Syn, influencing primary nucleation, aggregate elongation, and secondary nucleation processes. Interfacial effects must therefore be taken into account to achieve a complete understanding of protein aggregation events in vitro as well as in vivo.

The air-water interface determines the outcome of seeding during amyloidogenesis

Amyloid formation is a hallmark of protein misfolding diseases (e.g. Type II diabetes mellitus). The energetically unfavourable nucleation step of amyloidogenesis can be accelerated by seeding, during which pre-formed aggregates act as templates for monomer recruitment. Hydrophobic-hydrophilic interfaces [e.g. AWI (air-water interface)] can also catalyse amyloidogenesis due to the surfactant properties of amyloidogenic polypeptides. Using thioflavin T fluorescence and electron microscopy, we demonstrate that the outcome of seeding on human islet amyloid polypeptide amyloidogenesis is dependent upon whether the AWI is present or absent and is dictated by seed type. Seeding significantly inhibits (with AWI) or promotes (without AWI) plateau height compared with seedless controls; with short fibrils being more efficient seeds than their longer counterparts. Moreover, promotion of nucleation by increasing monomer concentrations can only be observed in the absence of an AWI. Using biophysical modelling, we suggest that a possible explanation for our results may reside in lateral interactions between seeds and monomers determining the fibril mass formed in seeded reactions at steady-state. Our results suggest that in vivo hydrophobic-hydrophilic interfaces (e.g. the presence of membranes and their turnover rate) may dictate the outcome of seeding during amyloidogenesis and that factors affecting the size of the pre-aggregate may be important.

BslA is a self-assembling bacterial hydrophobin that coats the Bacillus subtilis biofilm

Biofilms represent the predominant mode of microbial growth in the natural environment. Bacillus subtilis is a ubiquitous Gram-positive soil bacterium that functions as an effective plant growth-promoting agent. The biofilm matrix is composed of an exopolysaccharide and an amyloid fiber-forming protein, TasA, and assembles with the aid of a small secreted protein, BslA. Here we show that natively synthesized and secreted BslA forms surface layers around the biofilm. Biophysical analysis demonstrates that BslA can self-assemble at interfaces, forming an elastic film. Molecular function is revealed from analysis of the crystal structure of BslA, which consists of an Ig-type fold with the addition of an unusual, extremely hydrophobic "cap" region. A combination of in vivo biofilm formation and in vitro biophysical analysis demonstrates that the central hydrophobic residues of the cap are essential to allow a hydrophobic, nonwetting biofilm to form as they control the surface activity of the BslA protein. The hydrophobic cap exhibits physiochemical properties remarkably similar to the hydrophobic surface found in fungal hydrophobins; thus, BslA is a structurally defined bacterial hydrophobin. We suggest that biofilms formed by other species of bacteria may have evolved similar mechanisms to provide protection to the resident bacterial community.

Combined effects of agitation, macromolecular crowding, and interfaces on amyloidogenesis

Amyloid formation and accumulation is a hallmark of protein misfolding diseases and is associated with diverse pathologies including type II diabetes and Alzheimer's disease (AD). In vitro, amyloidogenesis is widely studied in conditions that do not simulate the crowded and viscous in vivo environment. A high volume fraction of most biological fluids is occupied by various macromolecules, a phenomenon known as macromolecular crowding. For some amyloid systems (e.g. α-synuclein) and under shaking condition, the excluded volume effect of macromolecular crowding favors aggregation, whereas increased viscosity reduces the kinetics of these reactions. Amyloidogenesis can also be catalyzed by hydrophobic-hydrophilic interfaces, represented by the air-water interface in vitro and diverse heterogeneous interfaces in vivo (e.g. membranes). In this study, we investigated the effects of two different crowding polymers (dextran and Ficoll) and two different experimental conditions (with and without shaking) on the fibrilization of amyloid-β peptide, a major player in AD pathogenesis. Specifically, we demonstrate that, during macromolecular crowding, viscosity dominates over the excluded volume effect only when the system is spatially non homogeneous (i.e. an air-water interface is present). We also show that the surfactant activity of the crowding agents can critically influence the outcome of macromolecular crowding and that the structure of the amyloid species formed may depend on the polymer used. This suggests that, in vivo, the outcome of amyloidogenesis may be affected by both macromolecular crowding and spatial heterogeneity (e.g. membrane turn-over). More generally, our work suggests that any factors causing changes in crowding may be susceptibility factors in AD.

Microbial manipulation of the amyloid fold

Microbial biofilms are encased in a protein, DNA, and polysaccharide matrix that protects the community, promotes interactions with the environment, and helps cells adhere together. The protein component of these matrices is often a remarkably stable, β-sheet-rich polymer called amyloid. Amyloids form ordered, self-templating fibers that are highly aggregative, making them a valuable biofilm component. Some eukaryotic proteins inappropriately adopt the amyloid fold, and these misfolded protein aggregates disrupt normal cellular proteostasis, which can cause significant cytotoxicity. Indeed, until recently amyloids were considered solely the result of protein misfolding. However, research over the past decade has revealed how various organisms have capitalized on the amyloid fold by developing sophisticated biogenesis pathways that coordinate gene expression, protein folding, and secretion so that amyloid-related toxicities are minimized. How microbes manipulate amyloids, by augmenting their advantageous properties and by reducing their undesirable properties, will be the subject of this review.

Rubber elongation factor (REF), a major allergen component in Hevea brasiliensis latex has amyloid properties

REF (Hevb1) and SRPP (Hevb3) are two major components of Hevea brasiliensis latex, well known for their allergenic properties. They are obviously taking part in the biosynthesis of natural rubber, but their exact function is still unclear. They could be involved in defense/stress mechanisms after tapping or directly acting on the isoprenoid biosynthetic pathway. The structure of these two proteins is still not described. In this work, it was discovered that REF has amyloid properties, contrary to SRPP. We investigated their structure by CD, TEM, ATR-FTIR and WAXS and neatly showed the presence of β-sheet organized aggregates for REF, whereas SRPP mainly fold as a helical protein. Both proteins are highly hydrophobic but differ in their interaction with lipid monolayers used to mimic the monomembrane surrounding the rubber particles. Ellipsometry experiments showed that REF seems to penetrate deeply into the monolayer and SRPP only binds to the lipid surface. These results could therefore clarify the role of these two paralogous proteins in latex production, either in the coagulation of natural rubber or in stress-related responses. To our knowledge, this is the first report of an amyloid formed from a plant protein. This suggests also the presence of functional amyloid in the plant kingdom.