Deletions of any single residues in Glu40-Ser48 loop connecting a domain and the first transmembrane helix of sarcoplasmic reticulum Ca(2+)-ATPase result in almost complete inhibition of conformational transition and hydrolysis of phosphoenzyme intermediate

The tilting motion of the central core reveals the transport mechanism of the sarco/endoplasmic reticulum Ca2+-ATPase

The sarco/endoplasmic reticulum Ca2+-ATPase (SERCA) transports two Ca2+ ions per ATP hydrolyzed from the cytoplasm to the lumen. However, how the ATP hydrolysis remotely drives the Ca2+ transport is unclear. In the SERCA1a crystal structures, the ATP hydrolysis is accompanied by the notably increasing tilting angle of the central core (CC) and the Ca2+ transport, and the CC tilting angle dramatically decreases in the E2 to E1 transition. We demonstrated that the significantly increasing tilting motion of the CC drove the Ca2+ release in the molecular dynamics simulation of the R836A variant, and the dramatic spontaneous decrease in the CC tilting angle of the E2 state triggers the restart of the SERCA1a's transport cycle. The repulsion between the phosphorylated D351 and the phosphate groups in ADP triggers the release of ADP from the SERCA1a headpiece. We proposed a novel SERCA transport mechanism in which ATP hydrolysis drives a significant tilting motion of the CC, which drives Ca2+ transport and the A domain rotational motion in the E1P-ADP-2Ca2+ to E2P transition. The dramatic spontaneous decrease in the CC tilting angle of the E2 state drives the restart of the transport cycle.

Multiple sub-state structures of SERCA2b reveal conformational overlap at transition steps during the catalytic cycle

Sarco/endoplasmic reticulum Ca²⁺ ATPase (SERCA) pumps Ca²⁺ into the endoplasmic reticulum (ER). Herein, we present cryo-electron microscopy (EM) structures of three intermediates of SERCA2b: Ca²⁺-bound phosphorylated (E1P·2Ca²⁺) and Ca²⁺-unbound dephosphorylated (E2·Pi) intermediates and another between the E2P and E2·Pi states. Our cryo-EM analysis demonstrates that the E1P·2Ca²⁺ state exists in low abundance and preferentially transitions to an E2P-like structure by releasing Ca²⁺ and that the Ca²⁺ release gate subsequently undergoes stepwise closure during the dephosphorylation processes. Importantly, each intermediate adopts multiple sub-state structures including those like the next one in the catalytic series, indicating conformational overlap at transition steps, as further substantiated by atomistic molecular dynamic simulations of SERCA2b in a lipid bilayer. The present findings provide insight into how enzymes accelerate catalytic cycles.

Angle change of the A-domain in a single SERCA1a molecule detected by defocused orientation imaging

The sarcoendoplasmic reticulum Ca²⁺-ATPase (SERCA) transports Ca²⁺ ions across the membrane coupled with ATP hydrolysis. Crystal structures of ligand-stabilized molecules indicate that the movement of actuator (A) domain plays a crucial role in Ca²⁺ translocation. However, the actual structural movements during the transitions between intermediates remain uncertain, in particular, the structure of E2PCa₂ has not been solved. Here, the angle of the A-domain was measured by defocused orientation imaging using isotropic total internal reflection fluorescence microscopy. A single SERCA1a molecule, labeled with fluorophore ReAsH on the A-domain in fixed orientation, was embedded in a nanodisc, and stabilized on Ni–NTA glass. Activation with ATP and Ca²⁺ caused angle changes of the fluorophore and therefore the A-domain, motions lost by inhibitor, thapsigargin. Our high-speed set-up captured the motion during EP isomerization, and suggests that the A-domain rapidly rotates back and forth from an E1PCa₂ position to a position close to the E2P state. This is the first report of the detection in the movement of the A-domain as an angle change. Our method provides a powerful tool to investigate the conformational change of a membrane protein in real-time.

Elusive Intermediate State Key in the Conversion of ATP Hydrolysis into Useful Work Driving the Ca2+ Pump SERCA

A key event in the ATP-driven transport cycle of the calcium pump sarco/endoplasmic reticulum Ca²⁺-ATPase (SERCA) occurs when autophosphorylation of the pump with two bound ions Ca²⁺ triggers a large conformational change that opens a gate on the luminal side of the membrane allowing the release of the ions. It is believed that this conformational transition proceeds through a two-step mechanism, with an initial rearrangement of the three cytoplasmic domains of the pump responsible for ATP binding and hydrolysis followed by the opening of the gate toward the luminal side in the transmembrane region. Here, molecular dynamics computation of the free energy landscapes associated with this transition show how, in response to phosphorylation, the cytoplasmic domains are partially reconfigured into an intermediate state on the path toward the E2 state with a closed luminal gate. It is suggested that the free energy associated with this conformational reorganization must subsequently be used to drive the opening of the gate on the luminal side.

Structure and Mechanism of P-Type ATPase Ion Pumps

P-type ATPases are found in all kingdoms of life and constitute a wide range of cation transporters, primarily for H⁺, Na⁺, K⁺, Ca²⁺, and transition metal ions such as Cu(I), Zn(II), and Cd(II). They have been studied through a wide range of techniques, and research has gained very significant insight on their transport mechanism and regulation. Here, we review the structure, function, and dynamics of P2-ATPases including Ca²⁺-ATPases and Na,K-ATPase. We highlight mechanisms of functional transitions that are associated with ion exchange on either side of the membrane and how the functional cycle is regulated by interaction partners, autoregulatory domains, and off-cycle states. Finally, we discuss future perspectives based on emerging techniques and insights.

Structural dynamics of P-type ATPase ion pumps

P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

Functional role of highly conserved residues of the N-terminal tail and first transmembrane segment of a P4-ATPase

The P4 family of P-type ATPases (P4-ATPases) plays an important role in maintaining phospholipid asymmetry in eukaryotic cell membranes. Leishmania miltefosine transporter (LMT) is a plasma membrane (PM) P4-ATPase that catalyses translocation into the parasite of the leishmanicidal drug miltefosine as well as phosphatidylcholine and phosphatidylethanolamine analogues. In the present study, we analysed the role, in LMT, of a series of highly conserved amino acids previously undescribed in the N-terminal region of P4-ATPases. Seven residues were identified and, according to an LMT structural model, five were located in the cytosolic N-terminal tail (Asn58, Ile60, Lys64, Tyr65 and Phe70) and the other two (Pro72 and Phe79) in the first transmembrane segment (TM1). Alanine-scanning mutagenesis analysis showed that N58A, Y65A and F79A mutations caused a considerable reduction in the LMT translocase activity. These mutations did not affect protein expression levels. We generated additional mutations in these three residues to assess the influence of the conservation degree on LMT translocase activity. Some of these mutations reduced expression levels without affecting the interaction between LMT and its CDC50 subunit, LRos3. Conserved and non-conserved mutations in the invariant residue Asn58 drastically reduced the translocase activity. Consequently, Asn58 may be necessary to achieve optimal catalytic LMT activity as previously described for the potentially equivalent Asn39 of the sarco/endoplasmic reticulum Ca2+-ATPase isoform 1a (SERCA1a). Additionally, conservation of a hydrophobic residue at position 79 is crucial for LMT stability.

Glycine 105 as Pivot for a Critical Knee-like Joint between Cytoplasmic and Transmembrane Segments of the Second Transmembrane Helix in Ca2+-ATPase

The cytoplasmic actuator domain of the sarco(endo)plasmic reticulum Ca²⁺-ATPase undergoes large rotational movements that influence the distant transmembrane transport sites, and a long second transmembrane helix (M2) connected with this domain plays critical roles in transmitting motions between the cytoplasmic catalytic domains and transport sites. Here we explore possible structural roles of Gly¹⁰⁵ between the cytoplasmic (M2c) and transmembrane (M2m) segments of M2 by introducing mutations that limit/increase conformational freedom. Alanine substitution G105A markedly retards isomerization of the phosphoenzyme intermediate (E1PCa₂ → E2PCa₂ → E2P + 2Ca²⁺), and disrupts Ca²⁺ occlusion in E1PCa₂ and E2PCa₂ at the transport sites uncoupling ATP hydrolysis and Ca²⁺ transport. In contrast, this substitution accelerates the ATPase activation (E2 → E1Ca₂). Introducing a glycine by substituting another residue on M2 in the G105A mutant (i.e. "G-shift substitution") identifies the glycine positions required for proper Ca²⁺ handling and kinetics in each step. All wild-type kinetic properties, including coupled transport, are fully restored in the G-shift substitution at position 112 (G105A/A112G) located on the same side of the M2c helix as Gly¹⁰⁵ facing M4/phosphorylation domain. Results demonstrate that Gly¹⁰⁵ functions as a flexible knee-like joint during the Ca²⁺ transport cycle, so that cytoplasmic domain motions can bend and strain M2 in the correct direction or straighten the helix for proper gating and coupling of Ca²⁺ transport and ATP hydrolysis.

Second transmembrane helix (M2) and long range coupling in Ca²⁺-ATPase

The actuator (A) domain of sarco(endo)plasmic reticulum Ca(2+)-ATPase not only plays a catalytic role but also undergoes large rotational movements that influence the distant transport sites through connections with transmembrane helices M1 and M2. Here we explore the importance of long helix M2 and its junction with the A domain by disrupting the helix structure and elongating with insertions of five glycine residues. Insertions into the membrane region of M2 and the top junctional segment impair Ca(2+) transport despite reasonable ATPase activity, indicating that they are uncoupled. These mutants fail to occlude Ca(2+). Those at the top segment also exhibited accelerated phosphoenzyme isomerization E1P → E2P. Insertions into the middle of M2 markedly accelerate E2P hydrolysis and cause strong resistance to inhibition by luminal Ca(2+). Insertions along almost the entire M2 region inhibit the dephosphorylated enzyme transition E2 → E1. The results pinpoint which parts of M2 control cytoplasm gating and which are critical for luminal gating at each stage in the transport cycle and suggest that proper gate function requires appropriate interactions, tension, and/or rigidity in the M2 region at appropriate times for coupling with A domain movements and catalysis.

Roles of long-range electrostatic domain interactions and K+ in phosphoenzyme transition of Ca2+-ATPase

Sarcoplasmic reticulum Ca(2+)-ATPase couples the motions and rearrangements of three cytoplasmic domains (A, P, and N) with Ca(2+) transport. We explored the role of electrostatic force in the domain dynamics in a rate-limiting phosphoenzyme (EP) transition by a systematic approach combining electrostatic screening with salts, computer analysis of electric fields in crystal structures, and mutations. Low KCl concentration activated and increasing salt above 0.1 m inhibited the EP transition. A plot of the logarithm of the transition rate versus the square of the mean activity coefficient of the protein gave a linear relationship allowing division of the activation energy into an electrostatic component and a non-electrostatic component in which the screenable electrostatic forces are shielded by salt. Results show that the structural change in the transition is sterically restricted, but that strong electrostatic forces, when K(+) is specifically bound at the P domain, come into play to accelerate the reaction. Electric field analysis revealed long-range electrostatic interactions between the N and P domains around their hinge. Mutations of the residues directly involved and other charged residues at the hinge disrupted in parallel the electric field and the structural transition. Favorable electrostatics evidently provides a low energy path for the critical N domain motion toward the P domain, overcoming steric restriction. The systematic approach employed here is, in general, a powerful tool for understanding the structural mechanisms of enzymes.

The role of domain: domain interactions versus domain: water interactions in the coarse-grained simulations of the E1P to E2P transitions in Ca-ATPase (SERCA)

SERCA is an important model system for understanding the molecular details of conformational change in membrane transport systems. This reflects the large number of solved X-ray structures and the equally large database of mutations that have been assayed. In this computational study, we provide a molecular dynamics description of the conformational changes during the E1P → E2P transitions. This set of states further changes with insertion mutants in the A-M3 linker region. These mutants were experimentally shown to lead to significant shifts in rates between the E1P → E2P states. Using the population shift framework and dynamic importance sampling method along with coarse-grained representations of the protein, lipid, and water, we suggest why these changes are found. The calculations sample on intermediates and suggest that changes in interactions, individual helix interactions, and water behavior are key elements in the molecular compositions that underlie shifts in kinetics. In particular, as the insertion length grows, it attracts more water and disrupts domain interactions, creating changes as well at the sites of key helix interactions between the A-Domain and the P-Domain. This provides a conceptual picture that aids understanding of the experimental results.

The sarcoplasmic Ca2+-ATPase: design of a perfect chemi-osmotic pump

The sarcoplasmic (SERCA 1a) Ca2+-ATPase is a membrane protein abundantly present in skeletal muscles where it functions as an indispensable component of the excitation-contraction coupling, being at the expense of ATP hydrolysis involved in Ca2+/H+ exchange with a high thermodynamic efficiency across the sarcoplasmic reticulum membrane. The transporter serves as a prototype of a whole family of cation transporters, the P-type ATPases, which in addition to Ca2+ transporting proteins count Na+, K+-ATPase and H+, K+-, proton- and heavy metal transporting ATPases as prominent members. The ability in recent years to produce and analyze at atomic (2·3-3 Å) resolution 3D-crystals of Ca2+-transport intermediates of SERCA 1a has meant a breakthrough in our understanding of the structural aspects of the transport mechanism. We describe here the detailed construction of the ATPase in terms of one membraneous and three cytosolic domains held together by a central core that mediates coupling between Ca2+-transport and ATP hydrolysis. During turnover, the pump is present in two different conformational states, E1 and E2, with a preference for the binding of Ca2+ and H+, respectively. We discuss how phosphorylated and non-phosphorylated forms of these conformational states with cytosolic, occluded or luminally exposed cation-binding sites are able to convert the chemical energy derived from ATP hydrolysis into an electrochemical gradient of Ca2+ across the sarcoplasmic reticulum membrane. In conjunction with these basic reactions which serve as a structural framework for the transport function of other P-type ATPases as well, we also review the role of the lipid phase and the regulatory and thermodynamic aspects of the transport mechanism.

In and out of the cation pumps: P-type ATPase structure revisited

Active transport across membranes is a crucial requirement for life. P-type ATPases build up electrochemical gradients at the expense of ATP by forming and splitting a covalent phosphoenzyme intermediate, coupled to conformational changes in the transmembrane section where the ions are translocated. The marked increment during the last three years in the number of crystal structures of P-type ATPases has greatly improved our understanding of the similarities and differences of pumps with different ion specificities, since the structures of the Ca2+-ATPase, the Na+,K+-ATPase and the H+-ATPase can now be compared directly. Mechanisms for ion gating, charge neutralization and backflow prevention are starting to emerge from comparative structural analysis; and in combination with functional studies of mutated pumps this provides a framework for speculating on how the ions are bound and released as well as on how specificity is achieved.

Stable structural analog of Ca2+-ATPase ADP-insensitive phosphoenzyme with occluded Ca2+ formed by elongation of A-domain/M1'-linker and beryllium fluoride binding

We have developed a stable analog for the ADP-insensitive phosphoenzyme intermediate with two occluded Ca(2+) at the transport sites (E2PCa(2)) of sarcoplasmic reticulum Ca(2+)-ATPase. This is normally a transient intermediate state during phosphoenzyme isomerization from the ADP-sensitive to ADP-insensitive form and Ca(2+) deocclusion/release to the lumen; E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+). Stabilization was achieved by elongation of the Glu(40)-Ser(48) loop linking the Actuator domain and M1 (1st transmembrane helix) with four glycine insertions at Gly(46)/Lys(47) and by binding of beryllium fluoride (BeF(x)) to the phosphorylation site of the Ca(2+)-bound ATPase (E1Ca(2)). The complex E2Ca(2)xBeF(3)(-) was also produced by lumenal Ca(2+) binding to E2xBeF(3)(-) (E2P ground state analog) of the elongated linker mutant. The complex was stable for at least 1 week at 25 degrees C. Only BeF(x), but not AlF(x) or MgF(x), produced the E2PCa(2) structural analog. Complex formation required binding of Mg(2+), Mn(2+), or Ca(2+) at the catalytic Mg(2+) site. Results reveal that the phosphorylation product E1PCa(2) and the E2P ground state (but not the transition states) become competent to produce the E2PCa(2) transient state during forward and reverse phosphoenzyme isomerization. Thus, isomerization and lumenal Ca(2+) release processes are strictly coupled with the formation of the acylphosphate covalent bond at the catalytic site. Results also demonstrate the critical structural roles of the Glu(40)-Ser(48) linker and of Mg(2+) at the catalytic site in these processes.

[Mechanism of ca(2+) pump as revealed by mutations, development of stable analogs of phosphorylated intermediates, and their structural analyses]

Sarco(endo)plasmic reticulum Ca(2+)-ATPase is a representative member of P-type cation transporting ATPases and catalyzes Ca(2+) transport coupled with ATP hydrolysis. The ATPase possesses three cytoplasmic domains (N, P, and A) and ten transmembrane helices (M1-M10). Ca(2+) binding at the transport sites in the transmembrane domain activates the ATPase and then the catalytic aspartate is auto-phosphorylated to form the phosphorylated intermediate (EP). Structural and functional studies have shown that, during the isomerization of EP in the Ca(2+) transport cycle, large motions of the three cytoplasmic domains take place, which then rearranges the transmembrane helices thereby destroying the Ca(2+) binding sites, opening the lumenal gate, and thus releasing the Ca(2+) into lumen. Stable structural analogues for the Ca(2+)-occluded and -released states of phosphorylated intermediates and for the transition and product states of the phosphorylation and dephosphorylation reactions were developed for biochemical and atomic-level structural studies to reveal the coupled changes in the catalytic and transport sites. Mutation studies identified the residues and structural regions essential for the structural changes and Ca(2+) transport function. Genetic dysfunction of Ca(2+)-ATPase causes various isoform-specific diseases. In this manuscript, recent understanding of the Ca-ATPase will be reviewed.

What can be learned about the function of a single protein from its various X-ray structures: the example of the sarcoplasmic calcium pump

Improvements in the handling of membrane proteins for crystallization, combined with better synchrotron sources for X-ray diffraction analysis, are leading to clarification of the structural details of an ever increasing number of membrane transporters and receptors. Here we describe how this development has resulted in the elucidation at atomic resolution of a large number of structures of the sarcoplasmic Ca(2+)-ATPase (SERCA1a) present in skeletal muscle. The structures corresponding to the various intermediary states have been obtained after stabilization with structural analogues of ATP and of metal fluorides as mimicks of inorganic phosphate. From these results it is possible, in accordance with previous biochemical and molecular biology data, to give a detailed structural description of both ATP hydrolysis and Ca(2+) transport through the membrane, to serve as the starting point for a fuller understanding of the pump mechanism and, in future studies, on the regulatory role of this ubiquitous intracellular Ca(2+)-ATPase in cellular Ca(2+) metabolism in normal and pathological conditions.

Roles of interaction between actuator and nucleotide binding domains of sarco(endo)plasmic reticulum Ca(2+)-ATPase as revealed by single and swap mutational analyses of serine 186 and glutamate 439

Roles of hydrogen bonding interaction between Ser(186) of the actuator (A) domain and Glu(439) of nucleotide binding (N) domain seen in the structures of ADP-insensitive phosphorylated intermediate (E2P) of sarco(endo)plasmic reticulum Ca(2+)-ATPase were explored by their double alanine substitution S186A/E439A, swap substitution S186E/E439S, and each of these single substitutions. All the mutants except the swap mutant S186E/E439S showed markedly reduced Ca(2+)-ATPase activity, and S186E/E439S restored completely the wild-type activity. In all the mutants except S186E/E439S, the isomerization of ADP-sensitive phosphorylated intermediate (E1P) to E2P was markedly retarded, and the E2P hydrolysis was largely accelerated, whereas S186E/E439S restored almost the wild-type rates. Results showed that the Ser(186)-Glu(439) hydrogen bond stabilizes the E2P ground state structure. The modulatory ATP binding at sub-mm approximately mm range largely accelerated the EP isomerization in all the alanine mutants and E439S. In S186E, this acceleration as well as the acceleration of the ATPase activity was almost completely abolished, whereas the swap mutation S186E/E439S restored the modulatory ATP acceleration with a much higher ATP affinity than the wild type. Results indicated that Ser(186) and Glu(439) are closely located to the modulatory ATP binding site for the EP isomerization, and that their hydrogen bond fixes their side chain configurations thereby adjusts properly the modulatory ATP affinity to respond to the cellular ATP level.

Use of glycerol-containing media to study the intrinsic fluorescence properties of detergent-solubilized native or expressed SERCA1a

Rapid irreversible inactivation of Ca (2+)-free states of detergent-solubilized SERCA1a (sarco-endoplasmic reticulum calcium ATPase 1a) has so far prevented the use of Trp fluorescence for functional characterization of this ATPase after its solubilization in various detergents. Here we show that using 20-40% glycerol for protection makes this fluorescence characterization possible. Most of the ligand-induced Trp fluorescence changes previously demonstrated to occur for SERCA1a embedded in native sarcoplasmic reticulum membranes were observed in the combined presence of glycerol and detergent, although the results greatly depended on the detergent used, namely, octaethylene glycol mono- n-dodecyl ether (C 12E 8) or dodecyl maltoside (DDM). In particular, at pH 6, we found a C 12E 8-dependent unexpectedly huge reduction in SERCA1a affinity for Ca (2+). We suggest that a major reason for the different effects of the two detergents is that high concentrations of C 12E 8, but not of DDM, slow down the E2 to E1 transition in solubilized and delipidated SERCA1a. Independently of the characterization of the specific effects of various detergents on SR vesicles, our results open the way to functional characterization by Trp fluorescence of heterologously expressed and purified mutants of SERCA1a in the presence of detergent, without their preliminary reconstitution into liposomes. As an example, we used the E309Q mutant to demonstrate our previous suspicion that Ca (2+) binding to Site I of SERCA1a in fact slightly reduces Trp fluorescence, and consequently that the rise in this fluorescence generally observed when two Ca (2+) ions bind to WT SERCA1a mainly reflects Ca (2+) binding at Site II of SERCA1a.

Roles of Tyr122-hydrophobic cluster and K+ binding in Ca2+ -releasing process of ADP-insensitive phosphoenzyme of sarcoplasmic reticulum Ca2+ -ATPase

Tyr(122)-hydrophobic cluster (Y122-HC) is an interaction network formed by the top part of the second transmembrane helix and the cytoplasmic actuator and phosphorylation domains of sarcoplasmic reticulum Ca(2+)-ATPase. We have previously found that Y122-HC plays critical roles in the processing of ADP-insensitive phosphoenzyme (E2P) after its formation by the isomerization from ADP-sensitive phosphoenzyme (E1PCa(2)) (Wang, G., Yamasaki, K., Daiho, T., and Suzuki, H. (2005) J. Biol. Chem. 280, 26508-26516). Here, we further explored kinetic properties of the alanine-substitution mutants of Y122-HC to examine roles of Y122-HC for Ca(2+) release process in E2P. In the steady state, the amount of E2P decreased so that of E1PCa(2) increased with increasing lumenal Ca(2+) concentration in the mutants with K(0.5) 110-320 microm at pH 7.3. These lumenal Ca(2+) affinities in E2P agreed with those estimated from the forward and lumenal Ca(2+)-induced reverse kinetics of the E1PCa(2)-E2P isomerization. K(0.5) of the wild type in the kinetics was estimated to be 1.5 mM. Thus, E2P of the mutants possesses significantly higher affinities for lumenal Ca(2+) than that of the wild type. The kinetics further indicated that the rates of lumenal Ca(2+) access and binding to the transport sites of E2P were substantially slowed by the mutations. Therefore, the proper formation of Y122-HC and resulting compactly organized structure are critical for both decreasing Ca(2+) affinity and opening the lumenal gate, thus for Ca(2+) release from E2PCa(2). Interestingly, when K(+) was omitted from the medium of the wild type, the properties of the wild type became similar to those of Y122-HC mutants. K(+) binding likely functions via producing the compactly organized structure, in this sense, similarly to Y122-HC.

Capsaicin stimulates uncoupled ATP hydrolysis by the sarcoplasmic reticulum calcium pump

In muscle cells the sarcoplasmic reticulum (SR) Ca(2+)-ATPase (SERCA) couples the free energy of ATP hydrolysis to pump Ca(2+) ions from the cytoplasm to the SR lumen. In addition, SERCA plays a key role in non-shivering thermogenesis through uncoupled reactions, where ATP hydrolysis takes place without active Ca(2+) translocation. Capsaicin (CPS) is a naturally occurring vanilloid, the consumption of which is linked with increased metabolic rate and core body temperature. Here we document the stimulation by CPS of the Ca(2+)-dependent ATP hydrolysis by SERCA without effects on Ca(2+) accumulation. The stimulation by CPS was significantly dependent on the presence of a Ca(2+) gradient across the SR membrane. ATP activation assays showed that the drug reduced the nucleotide affinity at the catalytic site, whereas the affinity at the regulatory site increased. Several biochemical analyses indicated that CPS stabilizes an ADP-insensitive E(2)P-related conformation that dephosphorylates at a higher rate than the control enzyme. Under conditions where uncoupled SERCA was specifically inhibited by the treatment with fluoride, low temperatures, or dimethyl sulfoxide, CPS had no stimulatory effect on ATP hydrolysis by SERCA. It is concluded that CPS stabilizes a SERCA sub-conformation where Ca(2+) is released from the phosphorylated intermediate to the cytoplasm instead of the SR lumen, increasing ATP hydrolysis not coupled with Ca(2+) transport. To the best of our knowledge CPS is the first natural drug that augments uncoupled SERCA, presumably resulting in thermogenesis. The role of CPS as a SERCA modulator is discussed.

Structural aspects of ion pumping by Ca2+-ATPase of sarcoplasmic reticulum

Ca2+-ATPase of muscle sarcoplasmic reticulum is an ATP-powered Ca2+-pump that establishes a >10,000-fold concentration gradient across the membrane. Its crystal structures have been determined for nine different states that cover nearly the entire reaction cycle. Presented here is a brief structural account of the ion pumping process, which is achieved by a series of very large domain rearrangements.

The structural basis of calcium transport by the calcium pump

The sarcoplasmic reticulum Ca2+-ATPase, a P-type ATPase, has a critical role in muscle function and metabolism. Here we present functional studies and three new crystal structures of the rabbit skeletal muscle Ca2+-ATPase, representing the phosphoenzyme intermediates associated with Ca2+ binding, Ca2+ translocation and dephosphorylation, that are based on complexes with a functional ATP analogue, beryllium fluoride and aluminium fluoride, respectively. The structures complete the cycle of nucleotide binding and cation transport of Ca2+-ATPase. Phosphorylation of the enzyme triggers the onset of a conformational change that leads to the opening of a luminal exit pathway defined by the transmembrane segments M1 through M6, which represent the canonical membrane domain of P-type pumps. Ca2+ release is promoted by translocation of the M4 helix, exposing Glu 309, Glu 771 and Asn 796 to the lumen. The mechanism explains how P-type ATPases are able to form the steep electrochemical gradients required for key functions in eukaryotic cells.

How processing of aspartylphosphate is coupled to lumenal gating of the ion pathway in the calcium pump

Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum is the best-studied member of the P-type or E1/E2 type ion transporting ATPases. It has been crystallized in seven different states that cover nearly the entire reaction cycle. Here we describe the structure of this ATPase complexed with phosphate analogs BeF(3)(-) and AlF(4)(-) in the absence of Ca(2+), which correspond to the E2P ground state and E2 approximately P transition state, respectively. The luminal gate is open with BeF(3)(-) and closed with AlF(4)(-). These and the E1 approximately P.ADP analog crystal structures show that a two-step rotation of the cytoplasmic A-domain opens and closes the luminal gate through the movements of the M1-M4 transmembrane helices. There are several conformational switches coupled to the rotation, and the one in the cytoplasmic part of M2 has critical importance. In the second step of rotation, positioning of one water molecule couples the hydrolysis of aspartylphosphate to closing of the gate.

Critical role of Val-304 in conformational transitions that allow Ca2+ occlusion and phosphoenzyme turnover in the Ca2+ transport ATPase

Site-directed mutations were produced in the distal segments of the Ca(2+)-ATPase (SERCA) transmembrane region. Mutations of Arg-290 (M3-M4 loop), Lys-958, and Thr-960 (M9 - M10 loop) had minor effects on ATPase activity and Ca(2+) transport. On the other hand, Val-304 (M4) mutations to Ile, Thr, Lys, Ala, or Glu inhibited transport by 90-95% while reducing ATP hydrolysis by 83% (Ile, Thr, and Lys), 56% (Ala), or 45% (Glu). Val-304 participates in Ca(2+) coordination with its main-chain carbonyl oxygen, and this function is not expected to be altered by mutations of its side chain. In fact, despite turnover inhibition, the Ca(2+) concentration dependence of residual ATPase activity remained unchanged in Val-304 mutants. However, the rates (but not the final levels) of phosphoenzyme formation, as well the rates of its hydrolytic cleavage, were reduced in proportion to the ATPase activity. Furthermore, with the Val-304 --> Glu mutant, which retained the highest residual ATPase activity, it was possible to show that occlusion of bound Ca(2+) was also impaired, thereby explaining the stronger inhibition of Ca(2+) transport relative to ATPase activity. The effects of Val-304 mutations on phosphoenzyme turnover are attributed to interference with mechanical links that couple movements of transmembrane segments and headpiece domains. The effects of thermal activation energy on reaction rates are thereby reduced. Furthermore, inadequate occlusion of bound Ca(2+) following utilization of ATP in Val-304 side-chain mutations is attributed to inadequate stabilization of the Glu-309 side chain and consequent defect of its gating function.

Critical role of Glu40-Ser48 loop linking actuator domain and first transmembrane helix of Ca2+-ATPase in Ca2+ deocclusion and release from ADP-insensitive phosphoenzyme

The functional importance of the length of the A/M1 linker (Glu(40)-Ser(48)) connecting the actuator domain and the first transmembrane helix of sarcoplasmic reticulum Ca(2+)-ATPase was explored by its elongation with glycine insertion at Pro(42)/Ala(43) and Gly(46)/Lys(47). Two or more glycine insertions at each site completely abolished ATPase activity. The isomerization of phosphoenzyme (EP) intermediate from the ADP-sensitive form (E1P) to the ADP-insensitive form (E2P) was markedly accelerated, but the decay of EP was completely blocked in these mutants. The E2P accumulated was therefore demonstrated to be E2PCa(2) possessing two occluded Ca(2+) ions at the transport sites, and the Ca(2+) deocclusion and release into lumen were blocked in the mutants. By contrast, the hydrolysis of the Ca(2+)-free form of E2P produced from P(i) without Ca(2+) was as rapid in the mutants as in the wild type. Analysis of resistance against trypsin and proteinase K revealed that the structure of E2PCa(2) accumulated is an intermediate state between E1PCa(2) and the Ca(2+)-released E2P state. Namely in E2PCa(2), the actuator domain is already largely rotated from its position in E1PCa(2) and associated with the phosphorylation domain as in the Ca(2+)-released E2P state; however, in E2PCa(2), the hydrophobic interactions among these domains and Leu(119)/Tyr(122) on the top of second transmembrane helix are not yet formed properly. This is consistent with our previous finding that these interactions at Tyr(122) are critical for formation of the Ca(2+)-released E2P structure. Results showed that the EP isomerization/Ca(2+)-release process consists of the following two steps: E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+); and the intermediate state E2PCa(2) was identified for the first time. Results further indicated that the A/M1 linker with its appropriately short length, probably because of the strain imposed in E2PCa(2), is critical for the correct positioning and interactions of the actuator and phosphorylation domains to cause structural changes for the Ca(2+) deocclusion and release.

Comprehensive analysis of expression and function of 51 sarco(endo)plasmic reticulum Ca2+-ATPase mutants associated with Darier disease

We examined possible defects of sarco(endo)plasmic reticulum Ca2+-ATPase 2b (SERCA2b) associated with its 51 mutations found in Darier disease (DD) pedigrees, i.e. most of the substitution and deletion mutations of residues reported so far. COS-1 cells were transfected with each of the mutant cDNAs, and the expression and function of the SERCA2b protein was analyzed with microsomes prepared from the cells and compared with those of the wild type. Fifteen mutants showed markedly reduced expression. Among the other 36, 29 mutants exhibited completely abolished or strongly inhibited Ca2+-ATPase activity, whereas the other seven possessed fairly high or normal ATPase activity. In four of the aforementioned seven mutants, Ca2+ transport activity was significantly reduced or almost completely lost, therefore uncoupled from ATP hydrolysis. The other three were exceptional cases as they were seemingly normal in protein expression and Ca2+ transport function, but were found to have abnormalities in the kinetic properties altered by the three mutations, which happened to be in the three DD pedigrees found by us previously (Sato, K., Yamasaki, K., Daiho, T., Miyauchi, Y., Takahashi, H., Ishida-Yamamoto, A., Nakamura, S., Iizuka, H., and Suzuki, H. (2004) J. Biol. Chem. 279, 35595-35603). Collectively, our results indicated that in most cases (48 of 51) DD mutations cause severe disruption of Ca2+ homeostasis by the defects in protein expression and/or transport function and hence DD, but even a slight disturbance of the homeostasis will result in the disease. Our results also provided further insight into the structure-function relationship of SERCAs and revealed critical regions and residues of the enzyme.

Critical hydrophobic interactions between phosphorylation and actuator domains of Ca2+-ATPase for hydrolysis of phosphorylated intermediate

Functional roles of seven hydrophobic residues on the interface between the actuator (A) and phosphorylation (P) domains of sarcoplasmic reticulum Ca2+-ATPase were explored by alanine and serine substitutions. The residues examined were Ile179/Leu180/Ile232 on the A domain, Val705/Val726 on the P domain, and Leu119/Tyr122 on the loop linking the A domain and M2 (the second transmembrane helix). These residues gather to form a hydrophobic cluster around Tyr122 in the crystal structures of Ca2+-ATPase in Ca2+-unbound E2 (unphosphorylated) and E2P (phosphorylated) states but are far apart in those of Ca2+-bound E1 (unphosphorylated) and E1P (phosphorylated) states. The substitution-effects were also compared with those of Ile235 on the A domain/M3 linker and those of T181GE of the A domain, since they are in the immediate vicinity of the Tyr122-cluster. All these substitutions almost completely inhibited ATPase activity without inhibiting Ca2+-activated E1P formation from ATP. Substitutions of Ile235 and T181GE blocked the E1P to E2P transition, whereas those in the Tyr122-cluster blocked the subsequent E2P hydrolysis. Substitutions of Ile235 and Glu183 also blocked EP hydrolysis. Results indicate that the Tyr122-cluster is formed during the E1P to E2P transition to configure the catalytic site and position Glu183 properly for hydrolyzing the acylphosphate. Ile235 on the A domain/M3 linker likely forms hydrophobic interactions with the A domain and thereby allowing the strain of this linker to be utilized for large motions of the A domain during these processes. The Tyr122-cluster, Ile235, and T181GE thus seem to have different roles and are critical in the successive events in processing phosphorylated intermediates to transport Ca2+.

The mechanics of calcium transport

With the recent atomic models for the sarcoplasmic reticulum Ca(2+)-ATPase in the Ca(2+)-bound state, the Ca(2+)-free, thapsigargin-inhibited state, and the Ca(2+)-free, vanadate-inhibited state, we are that much closer to understanding and animating the Ca(2+)-transport cycle. These "snapshots" of the Ca(2+)-transport cycle reveal an impressive breadth and complexity of conformational change. The cytoplasmic domains undergo rigid-body movements that couple the energy of ATP to the transport of Ca2+ across the membrane. Large-scale rearrangements in the transmembrane domain suggest that the Ca(2+)-binding sites may alternately cease to exist and reform during the transport cycle. Of the three cytoplasmic domains, the actuator (A) domain undergoes the largest movement, namely a 110 degrees rotation normal to the membrane. This domain is linked to transmembrane segments M1-M3, which undergo large rearrangements in the membrane domain. Together, these movements are a main event in Ca2+ transport, yet their significance is poorly understood. Nonetheless, inhibition or modulation of Ca(2+)-ATPase activity appears to target these conformational changes. Thapsigargin is a high-affinity inhibitor that binds to the M3 helix near Phe256, and phospholamban is a modulator of Ca(2+)-ATPase activity that has been cross-linked to M2 and M4. The purpose of this review is to postulate roles for the A domain and M1-M3 in Ca2+ transport and inhibition.

Structural basis of ion pumping by Ca2+-ATPase of the sarcoplasmic reticulum

The structures of the Ca2+-ATPase (SERCA1a) have been determined for five different states by X-ray crystallography. Detailed comparison of the structures in the Ca2+ bound form and unbound (but thapsigargin bound) form reveals that very large rearrangements of the transmembrane helices take place accompanying Ca2+ dissociation and binding and that they are mechanically linked with equally large movements of the cytoplasmic domains. The meanings of the rearrangements of the transmembrane helices and those of the cytoplasmic domains as well as the mechanistic roles of phosphorylation are now becoming clear. Furthermore, the roles of critical amino acid residues identified by extensive mutagenesis studies are becoming evident in terms of atomic structure.

Distinct types of abnormality in kinetic properties of three Darier disease-causing sarco(endo)plasmic reticulum Ca2+-ATPase mutants that exhibit normal expression and high Ca2+ transport activity

The possible functional abnormalities in three different Darier disease-causing Ca(2+)-ATPase (SERCA2b) mutants, Ile(274) --> Val at the lumenal end of M3, Leu(321) --> Phe on the cytoplasmic part of M4, and Met(719) --> Ile in P domain, were explored, because they exhibited nearly normal expression and localization in COS-1 cells and the high ATPase and coupled Ca(2+) transport activities that were essentially identical (L321F) or slightly lower (I274V by approximately 35% and M719I by approximately 30%) as compared with those of the wild type. These mutations happened to be in Japanese patients found previously by us. Kinetic analyses revealed that each of the mutants possesses distinct types of abnormalities; M719I and L321F possess the 2-3-fold reduced affinity for cytoplasmic Ca(2+), whereas I274V possesses the normal high affinity. L321F exhibited also the remarkably reduced sensitivity to the feedback inhibition of the transport cycle by accumulated lumenal Ca(2+), as demonstrated with the effect of Ca(2+) ionophore on ATPase activity and more specifically with the effects of Ca(2+) (up to 50 mm) on the decay of phosphoenzyme intermediates. The results on I274V and M719I suggest that the physiological requirement for Ca(2+) homeostasis in keratinocytes to avoid haploinsufficiency is very strict, probably much more than considered previously. The insensitivity to lumenal Ca(2+) in L321F likely brings the lumenal Ca(2+) to an abnormally elevated level. The three mutants with their distinctively altered kinetic properties will thus likely cause different types of perturbation of intracellular Ca(2+) homeostasis, but nevertheless all types of perturbation result in Darier disease. It might be possible that the observed unique feature of L321F could possibly be associated with the specific symptoms in the pedigree with this mutation, neuropsychiatric disorder, and behavior problems. The results also provided further insight into the global nature of conformational changes of SERCAs for ATP-driven Ca(2+) transport.

Importance of Transmembrane Segment M1 of the Sarcoplasmic Reticulum Ca2+-ATPase in Ca2+ Occlusion and Phosphoenzyme Processing

The functional consequences of a series of point mutations in transmembrane segment M1 of sarcoplasmic reticulum Ca2+-ATPase were analyzed in steady-state and transient kinetic experiments examining the partial reaction steps involved in Ca2+ interaction and phosphoenzyme turnover. Arginine or leucine substitution of Glu51, Glu55, or Glu58, located in the N-terminal third of M1, did not affect these functions. Arginine or leucine substitution of Asp59, located right at the bend of M1 seen in the crystal structure of the thapsigargin-bound form, caused a 10-fold increase of the rate of Ca2+ dissociation toward the cytoplasmic side. Mutation of Leu60 to alanine or proline and of Val62 to alanine also enhanced Ca2+ dissociation, whereas an 11-fold reduction of the rate of Ca2+ dissociation was observed upon alanine substitution of Leu65, thus providing evidence for a relation of the middle part of M1 to a gating mechanism controlling the dissociation of occluded Ca2+ from its membranous binding sites. Moreover, phosphoenzyme processing was affected by some of the latter mutations, in particular leucine substitution of Asp59, and alanine substitution of Leu65 accelerated the transition to ADP-insensitive phosphoenzyme and blocked its dephosphorylation, thus demonstrating that this part of M1, besides being important in Ca2+ interaction, furthermore, is a critical element in the long range signaling between the transmembrane domain and the cytoplasmic catalytic site.

Functional Properties of Sarcoplasmic Reticulum Ca2+-ATPase after Proteolytic Cleavage at Leu119-Lys120, Close to the A-domain

By measuring the phosphorylation levels of individual proteolytic fragments of SERCA1a separated by electrophoresis after their phosphorylation, we were able to study the catalytic properties of a p95C-p14N complex arising from SERCA1a cleavage by proteinase K between Leu(119) and Lys(120), in the loop linking the A-domain with the second transmembrane segment. ATP hydrolysis by the complex was very strongly inhibited, although ATP-dependent phosphorylation and the conversion of the ADP-sensitive E1P form to E2P still occurred at appreciable rates. However, the rate of subsequent dephosphorylation of E2P was inhibited to a dramatic extent, and this was also the case for the rate of "backdoor" formation of E2P from E2 and P(i). E2P formation from E2 at equilibrium nevertheless indicated little change in the apparent affinity for P(i) or Mg(2+), while binding of orthovanadate was weaker. The p95C-p14N complex also had a slightly reduced affinity for Ca(2+) and exhibited a reduced rate for its Ca(2+)-dependent transition from E2 to Ca(2)E1. Thus, disruption of the N-terminal link of the A-domain with the transmembrane region seems to shift the conformational equilibria of Ca(2+)-ATPase from the E1/E1P toward the E2/E2P states and to increase the activation energy for dephosphorylation of Ca(2+)-ATPase, reviving the old idea of the A-domain being a phosphatase domain as part of the transduction machinery.

Distinct natures of beryllium fluoride-bound, aluminum fluoride-bound, and magnesium fluoride-bound stable analogues of an ADP-insensitive phosphoenzyme intermediate of sarcoplasmic reticulum Ca2+-ATPase: changes in catalytic and transport sites during phosphoenzyme hydrolysis

The structural natures of stable analogues for the ADP-insensitive phosphoenzyme (E2P) of Ca(2+)-ATPase formed in sarcoplasmic reticulum vesicles, i.e. the enzymes with bound beryllium fluoride (BeF.E2), bound aluminum fluoride (AlF.E2), and bound magnesium fluoride (MgF.E2), were explored and compared with those of actual E2P formed from P(i) without Ca(2+). Changes in trinitrophenyl-AMP fluorescence revealed that the catalytic site is strongly hydrophobic in BeF.E2 as in E2P but hydrophilic in MgF.E2 and AlF.E2; yet, the three cytoplasmic domains are compactly organized in these states. Thapsigargin, which was shown in the crystal structure to fix the transmembrane helices and, thus, the postulated Ca(2+) release pathway to lumen in a closed state, largely reduced the tryptophan fluorescence in BeF.E2 as in E2P, but only very slightly (hence, the release pathway is likely closed without thapsigargin) in MgF.E2 and AlF.E2 as in dephosphorylated enzyme. Consistently, the completely suppressed Ca(2+)-ATPase activity in BeF-treated vesicles was rapidly restored in the presence of ionophore A23187 but not in its absence by incubation with Ca(2+) (over several millimolar concentrations) at pH 6, and, therefore, lumenal Ca(2+) is accessible to reactivate the enzyme. In contrast, no or only very slow restoration was observed with vesicles treated with MgF and AlF even with A23187. BeF.E2 thus has the features very similar to those characteristic of the E2P ground state, although AlF.E2 and MgF.E2 most likely mimic the transition or product state for the E2P hydrolysis, during which the hydrophobic nature around the phosphorylation site is lost and the Ca(2+) release pathway is closed. The change in hydrophobic nature is probably associated with the change in phosphate geometry from the covalently bound tetrahedral ground state (BeF(3)(-)) to trigonal bipyramidal transition state (AlF(3) or AlF(4)(-)) and further to tetrahedral product state (MgF(4)(2-)), and such change likely rearranges transmembrane helices to prevent access and leakage of lumenal Ca(2+).

Multiple and distinct effects of mutations of Tyr122, Glu123, Arg324, and Arg334 involved in interactions between the top part of second and fourth transmembrane helices in sarcoplasmic reticulum Ca2+-ATPase: changes in cytoplasmic domain organization during isometric transition of phosphoenzyme intermediate and subsequent Ca2+ release

We explored, by mutational substitutions and kinetic analysis, possible roles of the four residues involved in the hydrogen-bonding or ionic interactions found in the Ca2+-bound structure of sarcoplasmic reticulum Ca2+-ATPase, Tyr(122)-Arg(324), and Glu(123)-Arg(334) at the top part of second transmembrane helix (M2) connected to the A domain and fourth transmembrane helix (M4) in the P domain. The observed substitution effects indicated that Glu(123), Arg(334), and Tyr(122) contributed to the rapid transition between the Ca2+-unbound and bound states of the unphosphorylated enzyme. Results further showed the more profound inhibitory effects of the substitutions in the M4/P domain (Arg(324) and Arg(334)) upon the isomeric transition of phosphorylated intermediate (EP) (loss of ADP sensitivity) and those in M2/A domain (Tyr(122) and Glu(123)) upon the subsequent processing and hydrolysis of EP. The observed distinct effects suggest that the interactions seen in the Ca2+-bound structure are not functionally important but indicate that Arg(334) with its positive charge and Tyr(122) with its aromatic ring are critically important for the above distinct steps. On the basis of the available structural information, the results strongly suggest that Arg(334) moves downward and forms new interactions with M2 (likely Asn(111)); it thus contributes to the inclination of the M4/P domain toward the M2/A domain, which is crucial for the appropriate gathering between the P domain and the largely rotated A domain to cause the loss of ADP sensitivity. On the other hand, Tyr(122) most likely functions in the subsequent Ca2+-releasing step to produce hydrophobic interactions at the A-P domain interface formed upon their gathering and thus to produce the Ca2+-released form of EP. During the Ca2+-transport cycle, the four residues seem to change interaction partners and thus contribute to the coordinated movements of the cytoplasmic and transmembrane domains.