Functional Properties of Sarcoplasmic Reticulum Ca2+-ATPase after Proteolytic Cleavage at Leu119-Lys120, Close to the A-domain

Multiple sub-state structures of SERCA2b reveal conformational overlap at transition steps during the catalytic cycle

Sarco/endoplasmic reticulum Ca²⁺ ATPase (SERCA) pumps Ca²⁺ into the endoplasmic reticulum (ER). Herein, we present cryo-electron microscopy (EM) structures of three intermediates of SERCA2b: Ca²⁺-bound phosphorylated (E1P·2Ca²⁺) and Ca²⁺-unbound dephosphorylated (E2·Pi) intermediates and another between the E2P and E2·Pi states. Our cryo-EM analysis demonstrates that the E1P·2Ca²⁺ state exists in low abundance and preferentially transitions to an E2P-like structure by releasing Ca²⁺ and that the Ca²⁺ release gate subsequently undergoes stepwise closure during the dephosphorylation processes. Importantly, each intermediate adopts multiple sub-state structures including those like the next one in the catalytic series, indicating conformational overlap at transition steps, as further substantiated by atomistic molecular dynamic simulations of SERCA2b in a lipid bilayer. The present findings provide insight into how enzymes accelerate catalytic cycles.

Angle change of the A-domain in a single SERCA1a molecule detected by defocused orientation imaging

The sarcoendoplasmic reticulum Ca²⁺-ATPase (SERCA) transports Ca²⁺ ions across the membrane coupled with ATP hydrolysis. Crystal structures of ligand-stabilized molecules indicate that the movement of actuator (A) domain plays a crucial role in Ca²⁺ translocation. However, the actual structural movements during the transitions between intermediates remain uncertain, in particular, the structure of E2PCa₂ has not been solved. Here, the angle of the A-domain was measured by defocused orientation imaging using isotropic total internal reflection fluorescence microscopy. A single SERCA1a molecule, labeled with fluorophore ReAsH on the A-domain in fixed orientation, was embedded in a nanodisc, and stabilized on Ni–NTA glass. Activation with ATP and Ca²⁺ caused angle changes of the fluorophore and therefore the A-domain, motions lost by inhibitor, thapsigargin. Our high-speed set-up captured the motion during EP isomerization, and suggests that the A-domain rapidly rotates back and forth from an E1PCa₂ position to a position close to the E2P state. This is the first report of the detection in the movement of the A-domain as an angle change. Our method provides a powerful tool to investigate the conformational change of a membrane protein in real-time.

Structural dynamics of P-type ATPase ion pumps

P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

High phosphatidylinositol 4-phosphate (PI4P)-dependent ATPase activity for the Drs2p-Cdc50p flippase after removal of its N- and C-terminal extensions

P4-ATPases, also known as phospholipid flippases, are responsible for creating and maintaining transbilayer lipid asymmetry in eukaryotic cell membranes. Here, we use limited proteolysis to investigate the role of the N and C termini in ATP hydrolysis and auto-inhibition of the yeast flippase Drs2p-Cdc50p. We show that limited proteolysis of the detergent-solubilized and purified yeast flippase may result in more than 1 order of magnitude increase of its ATPase activity, which remains dependent on phosphatidylinositol 4-phosphate (PI4P), a regulator of this lipid flippase, and specific to a phosphatidylserine substrate. Using thrombin as the protease, Cdc50p remains intact and in complex with Drs2p, which is cleaved at two positions, namely after Arg¹⁰⁴ and after Arg ¹²⁹⁰, resulting in a homogeneous sample lacking 104 and 65 residues from its N and C termini, respectively. Removal of the 1291-1302-amino acid region of the C-terminal extension is critical for relieving the auto-inhibition of full-length Drs2p, whereas the 1-104 N-terminal residues have an additional but more modest significance for activity. The present results therefore reveal that trimming off appropriate regions of the terminal extensions of Drs2p can greatly increase its ATPase activity in the presence of PI4P and demonstrate that relief of such auto-inhibition remains compatible with subsequent regulation by PI4P. These experiments suggest that activation of the Drs2p-Cdc50p flippase follows a multistep mechanism, with preliminary release of a number of constraints, possibly through the binding of regulatory proteins in the trans-Golgi network, followed by full activation by PI4P.

Glycine 105 as Pivot for a Critical Knee-like Joint between Cytoplasmic and Transmembrane Segments of the Second Transmembrane Helix in Ca2+-ATPase

The cytoplasmic actuator domain of the sarco(endo)plasmic reticulum Ca²⁺-ATPase undergoes large rotational movements that influence the distant transmembrane transport sites, and a long second transmembrane helix (M2) connected with this domain plays critical roles in transmitting motions between the cytoplasmic catalytic domains and transport sites. Here we explore possible structural roles of Gly¹⁰⁵ between the cytoplasmic (M2c) and transmembrane (M2m) segments of M2 by introducing mutations that limit/increase conformational freedom. Alanine substitution G105A markedly retards isomerization of the phosphoenzyme intermediate (E1PCa₂ → E2PCa₂ → E2P + 2Ca²⁺), and disrupts Ca²⁺ occlusion in E1PCa₂ and E2PCa₂ at the transport sites uncoupling ATP hydrolysis and Ca²⁺ transport. In contrast, this substitution accelerates the ATPase activation (E2 → E1Ca₂). Introducing a glycine by substituting another residue on M2 in the G105A mutant (i.e. "G-shift substitution") identifies the glycine positions required for proper Ca²⁺ handling and kinetics in each step. All wild-type kinetic properties, including coupled transport, are fully restored in the G-shift substitution at position 112 (G105A/A112G) located on the same side of the M2c helix as Gly¹⁰⁵ facing M4/phosphorylation domain. Results demonstrate that Gly¹⁰⁵ functions as a flexible knee-like joint during the Ca²⁺ transport cycle, so that cytoplasmic domain motions can bend and strain M2 in the correct direction or straighten the helix for proper gating and coupling of Ca²⁺ transport and ATP hydrolysis.

A high-yield co-expression system for the purification of an intact Drs2p-Cdc50p lipid flippase complex, critically dependent on and stabilized by phosphatidylinositol-4-phosphate

P-type ATPases from the P4 subfamily (P4-ATPases) are energy-dependent transporters, which are thought to establish lipid asymmetry in eukaryotic cell membranes. Together with their Cdc50 accessory subunits, P4-ATPases couple ATP hydrolysis to lipid transport from the exoplasmic to the cytoplasmic leaflet of plasma membranes, late Golgi membranes, and endosomes. To gain insights into the structure and function of these important membrane pumps, robust protocols for expression and purification are required. In this report, we present a procedure for high-yield co-expression of a yeast flippase, the Drs2p-Cdc50p complex. After recovery of yeast membranes expressing both proteins, efficient purification was achieved in a single step by affinity chromatography on streptavidin beads, yielding ∼1–2 mg purified Drs2p-Cdc50p complex per liter of culture. Importantly, the procedure enabled us to recover a fraction that mainly contained a 1∶1 complex, which was assessed by size-exclusion chromatography and mass spectrometry. The functional properties of the purified complex were examined, including the dependence of its catalytic cycle on specific lipids. The dephosphorylation rate was stimulated in the simultaneous presence of the transported substrate, phosphatidylserine (PS), and the regulatory lipid phosphatidylinositol-4-phosphate (PI4P), a phosphoinositide that plays critical roles in membrane trafficking events from the trans-Golgi network (TGN). Likewise, overall ATP hydrolysis by the complex was critically dependent on the simultaneous presence of PI4P and PS. We also identified a prominent role for PI4P in stabilization of the Drs2p-Cdc50p complex towards temperature- or C₁₂E₈-induced irreversible inactivation. These results indicate that the Drs2p-Cdc50p complex remains functional after affinity purification and that PI4P as a cofactor tightly controls its stability and catalytic activity. This work offers appealing perspectives for detailed structural and functional characterization of the Drs2p-Cdc50p lipid transport mechanism.

S-palmitoylation and s-oleoylation of rabbit and pig sarcolipin

Sarcolipin (SLN) is a regulatory peptide present in sarcoplasmic reticulum (SR) from skeletal muscle of animals. We find that native rabbit SLN is modified by a fatty acid anchor on Cys-9 with a palmitic acid in about 60% and, surprisingly, an oleic acid in the remaining 40%. SLN used for co-crystallization with SERCA1a (Winther, A. M., Bublitz, M., Karlsen, J. L., Moller, J. V., Hansen, J. B., Nissen, P., and Buch-Pedersen, M. J. (2013) Nature 495, 265-2691; Ref. 1) is also palmitoylated/oleoylated, but is not visible in crystal structures, probably due to disorder. Treatment with 1 m hydroxylamine for 1 h removes the fatty acids from a majority of the SLN pool. This treatment did not modify the SERCA1a affinity for Ca(2+) but increased the Ca(2+)-dependent ATPase activity of SR membranes indicating that the S-acylation of SLN or of other proteins is required for this effect on SERCA1a. Pig SLN is also fully palmitoylated/oleoylated on its Cys-9 residue, but in a reverse ratio of about 40/60. An alignment of 67 SLN sequences from the protein databases shows that 19 of them contain a cysteine and the rest a phenylalanine at position 9. Based on a cladogram, we postulate that the mutation from phenylalanine to cysteine in some species is the result of an evolutionary convergence. We suggest that, besides phosphorylation, S-acylation/deacylation also regulates SLN activity.

Uncoupling of sarcoplasmic reticulum Ca²⁺-ATPase by N-arachidonoyl dopamine. Members of the endocannabinoid family as thermogenic drugs

BACKGROUND AND PURPOSE

The sarcoplasmic reticulum Ca²⁺-ATPase (SERCA) plays a role in thermogenesis. The exogenous compound capsaicin increased SERCA-mediated ATP hydrolysis not coupled to Ca²⁺ transport. Here, we have sought to identify endogenous compounds that may function as SERCA uncoupling agents.

EXPERIMENTAL APPROACH

Using isolated SR vesicles from rabbits, we have screened for endogenous compounds that uncouple SERCA. We have also studied their ability to deplete cytoplasmic ATP from human skeletal muscle cells in culture.

KEY RESULTS

Studies on SR vesicles showed that the endogenous lipid metabolite N-arachidonoyl dopamine (NADA) was a potent stimulator of SERCA uncoupling. NADA stabilized an E₁-like pump conformation that had a lower dephosphorylation rate, low affinity for Ca²⁺ at the luminal sites and a specific proteinase K cleavage pattern involving protection of the C-terminal p83C fragment from further cleavage. Moreover, we found a significantly decreased cytoplasmic ATP levels following treatment of skeletal muscle cells with 100 nM NADA. This effect was dependent on the presence of glucose and abolished by pretreatment with the specific SERCA inhibitor thapsigargin, regardless of the presence of glucose.

CONCLUSIONS AND IMPLICATIONS

NADA is an endogenous molecule that may function as SERCA uncoupling agent in vivo. Members of the endocannabinoid family exert concerted actions on several Ca²⁺-handling proteins. Uncoupling of SERCA by exogenous compounds could be a novel post-mitochondrial strategy for reduction of cellular ATP levels. In addition, signalling networks leading to SERCA uncoupling can be explored to study the importance of this ion pump in pathophysiological conditions related to metabolism.

Active detergent-solubilized H+,K+-ATPase is a monomer

The H(+),K(+)-ATPase pumps protons or hydronium ions and is responsible for the acidification of the gastric fluid. It is made up of an α-catalytic and a β-glycosylated subunit. The relation between cation translocation and the organization of the protein in the membrane are not well understood. We describe here how pure and functionally active pig gastric H(+),K(+)-ATPase with an apparent Stokes radius of 6.3 nm can be obtained after solubilization with the non-ionic detergent C(12)E(8), followed by exchange of C(12)E(8) with Tween 20 on a Superose 6 column. Mass spectroscopy indicates that the β-subunit bears an excess mass of 9 kDa attributable to glycosylation. From chemical analysis, there are 0.25 g of phospholipids and around 0.024 g of cholesterol bound per g of protein. Analytical ultracentrifugation shows one main complex, sedimenting at s(20,)(w) = 7.2 ± 0.1 S, together with minor amounts of irreversibly aggregated material. From these data, a buoyant molecular mass is calculated, corresponding to an H(+),K(+)-ATPase α,β-protomer of 147.3 kDa. Complementary sedimentation velocity with deuterated water gives a picture of an α,β-protomer with 0.9-1.4 g/g of bound detergent and lipids and a reasonable frictional ratio of 1.5, corresponding to a Stokes radius of 7.1 nm. An α(2),β(2) dimer is rejected by the data. Light scattering coupled to gel filtration confirms the monomeric state of solubilized H(+),K(+)-ATPase. Thus, α,β H(+),K(+)-ATPase is active at least in detergent and may plausibly function as a monomer, as has been established for other P-type ATPases, Ca(2+)-ATPase and Na(+),K(+)-ATPase.

Metal fluoride complexes of Na,K-ATPase: characterization of fluoride-stabilized phosphoenzyme analogues and their interaction with cardiotonic steroids

The Na,K-ATPase belongs to the P-type ATPase family of primary active cation pumps. Metal fluorides like magnesium-, beryllium-, and aluminum fluoride act as phosphate analogues and inhibit P-type ATPases by interacting with the phosphorylation site, stabilizing conformations that are analogous to specific phosphoenzyme intermediates. Cardiotonic steroids like ouabain used in the treatment of congestive heart failure and arrhythmias specifically inhibit the Na,K-ATPase, and the detailed structure of the highly conserved binding site has recently been described by the crystal structure of the shark Na,K-ATPase in a state analogous to E2·2K(+)·P(i) with ouabain bound with apparently low affinity (1). In the present work inhibition, and subsequent reactivation by high Na(+), after treatment of shark Na,K-ATPase with various metal fluorides are characterized. Half-maximal inhibition of Na,K-ATPase activity by metal fluorides is in the micromolar range. The binding of cardiotonic steroids to the metal fluoride-stabilized enzyme forms was investigated using the fluorescent ouabain derivative 9-anthroyl ouabain and compared with binding to phosphorylated enzyme. The fastest binding was to the Be-fluoride stabilized enzyme suggesting a preformed ouabain binding cavity, in accord with results for Ca-ATPase where Be-fluoride stabilizes the E2-P ground state with an open luminal ion access pathway, which in Na,K-ATPase could be a passage for ouabain. The Be-fluoride stabilized enzyme conformation closely resembles the E2-P ground state according to proteinase K cleavage. Ouabain, but not its aglycone ouabagenin, prevented reactivation of this metal fluoride form by high Na(+) demonstrating the pivotal role of the sugar moiety in closing the extracellular cation pathway.

The sarcoplasmic Ca2+-ATPase: design of a perfect chemi-osmotic pump

The sarcoplasmic (SERCA 1a) Ca2+-ATPase is a membrane protein abundantly present in skeletal muscles where it functions as an indispensable component of the excitation-contraction coupling, being at the expense of ATP hydrolysis involved in Ca2+/H+ exchange with a high thermodynamic efficiency across the sarcoplasmic reticulum membrane. The transporter serves as a prototype of a whole family of cation transporters, the P-type ATPases, which in addition to Ca2+ transporting proteins count Na+, K+-ATPase and H+, K+-, proton- and heavy metal transporting ATPases as prominent members. The ability in recent years to produce and analyze at atomic (2·3-3 Å) resolution 3D-crystals of Ca2+-transport intermediates of SERCA 1a has meant a breakthrough in our understanding of the structural aspects of the transport mechanism. We describe here the detailed construction of the ATPase in terms of one membraneous and three cytosolic domains held together by a central core that mediates coupling between Ca2+-transport and ATP hydrolysis. During turnover, the pump is present in two different conformational states, E1 and E2, with a preference for the binding of Ca2+ and H+, respectively. We discuss how phosphorylated and non-phosphorylated forms of these conformational states with cytosolic, occluded or luminally exposed cation-binding sites are able to convert the chemical energy derived from ATP hydrolysis into an electrochemical gradient of Ca2+ across the sarcoplasmic reticulum membrane. In conjunction with these basic reactions which serve as a structural framework for the transport function of other P-type ATPases as well, we also review the role of the lipid phase and the regulatory and thermodynamic aspects of the transport mechanism.

In and out of the cation pumps: P-type ATPase structure revisited

Active transport across membranes is a crucial requirement for life. P-type ATPases build up electrochemical gradients at the expense of ATP by forming and splitting a covalent phosphoenzyme intermediate, coupled to conformational changes in the transmembrane section where the ions are translocated. The marked increment during the last three years in the number of crystal structures of P-type ATPases has greatly improved our understanding of the similarities and differences of pumps with different ion specificities, since the structures of the Ca2+-ATPase, the Na+,K+-ATPase and the H+-ATPase can now be compared directly. Mechanisms for ion gating, charge neutralization and backflow prevention are starting to emerge from comparative structural analysis; and in combination with functional studies of mutated pumps this provides a framework for speculating on how the ions are bound and released as well as on how specificity is achieved.

Purified E255L mutant SERCA1a and purified PfATP6 are sensitive to SERCA-type inhibitors but insensitive to artemisinins

The antimalarial drugs artemisinins have been described as inhibiting Ca(2+)-ATPase activity of PfATP6 (Plasmodium falciparum ATP6) after expression in Xenopus oocytes. Mutation of an amino acid residue in mammalian SERCA1 (Glu(255)) to the equivalent one predicted in PfATP6 (Leu) was reported to induce sensitivity to artemisinin in the oocyte system. However, in the present experiments, we found that artemisinin did not inhibit mammalian SERCA1a E255L either when expressed in COS cells or after purification of the mutant expressed in Saccharomyces cerevisiae. Moreover, we found that PfATP6 after expression and purification from S. cerevisiae was insensitive to artemisinin and significantly less sensitive to thapsigargin and 2,5-di(tert-butyl)-1,4-benzohydroquinone than rabbit SERCA1 but retained higher sensitivity to cyclopiazonic acid, another type of SERCA1 inhibitor. Although mammalian SERCA and purified PfATP6 appear to have different pharmacological profiles, their insensitivity to artemisinins suggests that the mechanism of action of this class of drugs on the calcium metabolism in the intact cell is complex and cannot be ascribed to direct inhibition of PfATP6. Furthermore, the successful purification of PfATP6 affords the opportunity to develop new antimalarials by screening for inhibitors against PfATP6.

Stable structural analog of Ca2+-ATPase ADP-insensitive phosphoenzyme with occluded Ca2+ formed by elongation of A-domain/M1'-linker and beryllium fluoride binding

We have developed a stable analog for the ADP-insensitive phosphoenzyme intermediate with two occluded Ca(2+) at the transport sites (E2PCa(2)) of sarcoplasmic reticulum Ca(2+)-ATPase. This is normally a transient intermediate state during phosphoenzyme isomerization from the ADP-sensitive to ADP-insensitive form and Ca(2+) deocclusion/release to the lumen; E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+). Stabilization was achieved by elongation of the Glu(40)-Ser(48) loop linking the Actuator domain and M1 (1st transmembrane helix) with four glycine insertions at Gly(46)/Lys(47) and by binding of beryllium fluoride (BeF(x)) to the phosphorylation site of the Ca(2+)-bound ATPase (E1Ca(2)). The complex E2Ca(2)xBeF(3)(-) was also produced by lumenal Ca(2+) binding to E2xBeF(3)(-) (E2P ground state analog) of the elongated linker mutant. The complex was stable for at least 1 week at 25 degrees C. Only BeF(x), but not AlF(x) or MgF(x), produced the E2PCa(2) structural analog. Complex formation required binding of Mg(2+), Mn(2+), or Ca(2+) at the catalytic Mg(2+) site. Results reveal that the phosphorylation product E1PCa(2) and the E2P ground state (but not the transition states) become competent to produce the E2PCa(2) transient state during forward and reverse phosphoenzyme isomerization. Thus, isomerization and lumenal Ca(2+) release processes are strictly coupled with the formation of the acylphosphate covalent bond at the catalytic site. Results also demonstrate the critical structural roles of the Glu(40)-Ser(48) linker and of Mg(2+) at the catalytic site in these processes.

What can be learned about the function of a single protein from its various X-ray structures: the example of the sarcoplasmic calcium pump

Improvements in the handling of membrane proteins for crystallization, combined with better synchrotron sources for X-ray diffraction analysis, are leading to clarification of the structural details of an ever increasing number of membrane transporters and receptors. Here we describe how this development has resulted in the elucidation at atomic resolution of a large number of structures of the sarcoplasmic Ca(2+)-ATPase (SERCA1a) present in skeletal muscle. The structures corresponding to the various intermediary states have been obtained after stabilization with structural analogues of ATP and of metal fluorides as mimicks of inorganic phosphate. From these results it is possible, in accordance with previous biochemical and molecular biology data, to give a detailed structural description of both ATP hydrolysis and Ca(2+) transport through the membrane, to serve as the starting point for a fuller understanding of the pump mechanism and, in future studies, on the regulatory role of this ubiquitous intracellular Ca(2+)-ATPase in cellular Ca(2+) metabolism in normal and pathological conditions.

Cdc50p plays a vital role in the ATPase reaction cycle of the putative aminophospholipid transporter Drs2p

Members of the P(4) subfamily of P-type ATPases are believed to catalyze transport of phospholipids across cellular bilayers. However, most P-type ATPases pump small cations or metal ions, and atomic structures revealed a transport mechanism that is conserved throughout the family. Hence, a challenging problem is to understand how this mechanism is adapted in P(4)-ATPases to flip phospholipids. P(4)-ATPases form heteromeric complexes with Cdc50 proteins. The primary role of these additional polypeptides is unknown. Here, we show that the affinity of yeast P(4)-ATPase Drs2p for its Cdc50-binding partner fluctuates during the transport cycle, with the strongest interaction occurring at a point where the enzyme is loaded with phospholipid ligand. We also find that specific interactions with Cdc50p are required to render the ATPase competent for phosphorylation at the catalytically important aspartate residue. Our data indicate that Cdc50 proteins are integral components of the P(4)-ATPase transport machinery. Thus, acquisition of these subunits may have been a crucial step in the evolution of flippases from a family of cation pumps.

Roles of Tyr122-hydrophobic cluster and K+ binding in Ca2+ -releasing process of ADP-insensitive phosphoenzyme of sarcoplasmic reticulum Ca2+ -ATPase

Tyr(122)-hydrophobic cluster (Y122-HC) is an interaction network formed by the top part of the second transmembrane helix and the cytoplasmic actuator and phosphorylation domains of sarcoplasmic reticulum Ca(2+)-ATPase. We have previously found that Y122-HC plays critical roles in the processing of ADP-insensitive phosphoenzyme (E2P) after its formation by the isomerization from ADP-sensitive phosphoenzyme (E1PCa(2)) (Wang, G., Yamasaki, K., Daiho, T., and Suzuki, H. (2005) J. Biol. Chem. 280, 26508-26516). Here, we further explored kinetic properties of the alanine-substitution mutants of Y122-HC to examine roles of Y122-HC for Ca(2+) release process in E2P. In the steady state, the amount of E2P decreased so that of E1PCa(2) increased with increasing lumenal Ca(2+) concentration in the mutants with K(0.5) 110-320 microm at pH 7.3. These lumenal Ca(2+) affinities in E2P agreed with those estimated from the forward and lumenal Ca(2+)-induced reverse kinetics of the E1PCa(2)-E2P isomerization. K(0.5) of the wild type in the kinetics was estimated to be 1.5 mM. Thus, E2P of the mutants possesses significantly higher affinities for lumenal Ca(2+) than that of the wild type. The kinetics further indicated that the rates of lumenal Ca(2+) access and binding to the transport sites of E2P were substantially slowed by the mutations. Therefore, the proper formation of Y122-HC and resulting compactly organized structure are critical for both decreasing Ca(2+) affinity and opening the lumenal gate, thus for Ca(2+) release from E2PCa(2). Interestingly, when K(+) was omitted from the medium of the wild type, the properties of the wild type became similar to those of Y122-HC mutants. K(+) binding likely functions via producing the compactly organized structure, in this sense, similarly to Y122-HC.

Capsaicin stimulates uncoupled ATP hydrolysis by the sarcoplasmic reticulum calcium pump

In muscle cells the sarcoplasmic reticulum (SR) Ca(2+)-ATPase (SERCA) couples the free energy of ATP hydrolysis to pump Ca(2+) ions from the cytoplasm to the SR lumen. In addition, SERCA plays a key role in non-shivering thermogenesis through uncoupled reactions, where ATP hydrolysis takes place without active Ca(2+) translocation. Capsaicin (CPS) is a naturally occurring vanilloid, the consumption of which is linked with increased metabolic rate and core body temperature. Here we document the stimulation by CPS of the Ca(2+)-dependent ATP hydrolysis by SERCA without effects on Ca(2+) accumulation. The stimulation by CPS was significantly dependent on the presence of a Ca(2+) gradient across the SR membrane. ATP activation assays showed that the drug reduced the nucleotide affinity at the catalytic site, whereas the affinity at the regulatory site increased. Several biochemical analyses indicated that CPS stabilizes an ADP-insensitive E(2)P-related conformation that dephosphorylates at a higher rate than the control enzyme. Under conditions where uncoupled SERCA was specifically inhibited by the treatment with fluoride, low temperatures, or dimethyl sulfoxide, CPS had no stimulatory effect on ATP hydrolysis by SERCA. It is concluded that CPS stabilizes a SERCA sub-conformation where Ca(2+) is released from the phosphorylated intermediate to the cytoplasm instead of the SR lumen, increasing ATP hydrolysis not coupled with Ca(2+) transport. To the best of our knowledge CPS is the first natural drug that augments uncoupled SERCA, presumably resulting in thermogenesis. The role of CPS as a SERCA modulator is discussed.

Structural aspects of ion pumping by Ca2+-ATPase of sarcoplasmic reticulum

Ca2+-ATPase of muscle sarcoplasmic reticulum is an ATP-powered Ca2+-pump that establishes a >10,000-fold concentration gradient across the membrane. Its crystal structures have been determined for nine different states that cover nearly the entire reaction cycle. Presented here is a brief structural account of the ion pumping process, which is achieved by a series of very large domain rearrangements.

The structural basis of calcium transport by the calcium pump

The sarcoplasmic reticulum Ca2+-ATPase, a P-type ATPase, has a critical role in muscle function and metabolism. Here we present functional studies and three new crystal structures of the rabbit skeletal muscle Ca2+-ATPase, representing the phosphoenzyme intermediates associated with Ca2+ binding, Ca2+ translocation and dephosphorylation, that are based on complexes with a functional ATP analogue, beryllium fluoride and aluminium fluoride, respectively. The structures complete the cycle of nucleotide binding and cation transport of Ca2+-ATPase. Phosphorylation of the enzyme triggers the onset of a conformational change that leads to the opening of a luminal exit pathway defined by the transmembrane segments M1 through M6, which represent the canonical membrane domain of P-type pumps. Ca2+ release is promoted by translocation of the M4 helix, exposing Glu 309, Glu 771 and Asn 796 to the lumen. The mechanism explains how P-type ATPases are able to form the steep electrochemical gradients required for key functions in eukaryotic cells.

Critical role of Val-304 in conformational transitions that allow Ca2+ occlusion and phosphoenzyme turnover in the Ca2+ transport ATPase

Site-directed mutations were produced in the distal segments of the Ca(2+)-ATPase (SERCA) transmembrane region. Mutations of Arg-290 (M3-M4 loop), Lys-958, and Thr-960 (M9 - M10 loop) had minor effects on ATPase activity and Ca(2+) transport. On the other hand, Val-304 (M4) mutations to Ile, Thr, Lys, Ala, or Glu inhibited transport by 90-95% while reducing ATP hydrolysis by 83% (Ile, Thr, and Lys), 56% (Ala), or 45% (Glu). Val-304 participates in Ca(2+) coordination with its main-chain carbonyl oxygen, and this function is not expected to be altered by mutations of its side chain. In fact, despite turnover inhibition, the Ca(2+) concentration dependence of residual ATPase activity remained unchanged in Val-304 mutants. However, the rates (but not the final levels) of phosphoenzyme formation, as well the rates of its hydrolytic cleavage, were reduced in proportion to the ATPase activity. Furthermore, with the Val-304 --> Glu mutant, which retained the highest residual ATPase activity, it was possible to show that occlusion of bound Ca(2+) was also impaired, thereby explaining the stronger inhibition of Ca(2+) transport relative to ATPase activity. The effects of Val-304 mutations on phosphoenzyme turnover are attributed to interference with mechanical links that couple movements of transmembrane segments and headpiece domains. The effects of thermal activation energy on reaction rates are thereby reduced. Furthermore, inadequate occlusion of bound Ca(2+) following utilization of ATP in Val-304 side-chain mutations is attributed to inadequate stabilization of the Glu-309 side chain and consequent defect of its gating function.

Critical role of Glu40-Ser48 loop linking actuator domain and first transmembrane helix of Ca2+-ATPase in Ca2+ deocclusion and release from ADP-insensitive phosphoenzyme

The functional importance of the length of the A/M1 linker (Glu(40)-Ser(48)) connecting the actuator domain and the first transmembrane helix of sarcoplasmic reticulum Ca(2+)-ATPase was explored by its elongation with glycine insertion at Pro(42)/Ala(43) and Gly(46)/Lys(47). Two or more glycine insertions at each site completely abolished ATPase activity. The isomerization of phosphoenzyme (EP) intermediate from the ADP-sensitive form (E1P) to the ADP-insensitive form (E2P) was markedly accelerated, but the decay of EP was completely blocked in these mutants. The E2P accumulated was therefore demonstrated to be E2PCa(2) possessing two occluded Ca(2+) ions at the transport sites, and the Ca(2+) deocclusion and release into lumen were blocked in the mutants. By contrast, the hydrolysis of the Ca(2+)-free form of E2P produced from P(i) without Ca(2+) was as rapid in the mutants as in the wild type. Analysis of resistance against trypsin and proteinase K revealed that the structure of E2PCa(2) accumulated is an intermediate state between E1PCa(2) and the Ca(2+)-released E2P state. Namely in E2PCa(2), the actuator domain is already largely rotated from its position in E1PCa(2) and associated with the phosphorylation domain as in the Ca(2+)-released E2P state; however, in E2PCa(2), the hydrophobic interactions among these domains and Leu(119)/Tyr(122) on the top of second transmembrane helix are not yet formed properly. This is consistent with our previous finding that these interactions at Tyr(122) are critical for formation of the Ca(2+)-released E2P structure. Results showed that the EP isomerization/Ca(2+)-release process consists of the following two steps: E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+); and the intermediate state E2PCa(2) was identified for the first time. Results further indicated that the A/M1 linker with its appropriately short length, probably because of the strain imposed in E2PCa(2), is critical for the correct positioning and interactions of the actuator and phosphorylation domains to cause structural changes for the Ca(2+) deocclusion and release.

The structural basis for coupling of Ca2+ transport to ATP hydrolysis by the sarcoplasmic reticulum Ca2+-ATPase

Recently, a series of structure determinations has nearly completed a structural description of the transport cycle of the sarcoplasmic reticulum Ca(2+)-ATPase, especially those steps concerned with the phosphorylation by ATP and the dephosphorylation reaction. From these structures Ca(2+)-ATPase emerges as a molecular machine, where globular cytosolic domains and transmembrane helices work in concert like a mechanical pump, as can be vividly demonstrated in animated versions of the pump cycle. The structures show that both ATP phosphorylation and dephosphorylation at Asp351 take place as nucleophilic SN2 reactions, which are associated with Ca(2+) and H(+) occluded states, respectively. These transitory steps ensure efficient coupling between Ca(2+) transport and ATP hydrolysis.

Mutational Analysis of the Conserved TGES Loop of Sarcoplasmic Reticulum Ca2+-ATPase

Crystal structures have shown that the conserved TGES loop of the Ca2+-ATPase is isolated in the Ca2E1 state but becomes inserted in the catalytic site in E2 states. Here, we have examined the kinetics of the partial reaction steps of the transport cycle and the binding of the phosphoryl analogs BeF, AlF, MgF, and vanadate in mutants with alterations to the TGES residues. The mutations encompassed variation of size, polarity, and charge of the side chains. Differential effects on the Ca2E1P --> E2P, E2P --> E2, and E2 --> Ca2E1 reactions and the binding of the phosphoryl analogs were observed. In the E183D mutant, the E2P --> E2 dephosphorylation reaction proceeded at a rate as high as one-third that of the wild type, whereas it was very slow in the other Glu183 mutants, including E183Q, thus demonstrating the need for a negatively charged carboxylate group to catalyze dephosphorylation. By contrast, the Ca2E1P --> E2P transition was accomplished at a reasonable rate with glutamine in place of Glu183, but not with aspartate, indicating that the length of the Glu183 side chain, in addition to its hydrogen bonding potential, is critical for Ca2E1P --> E2P. This transition was also slowed in mutants with alteration to other TGES residues. The data provide functional evidence in support of the proposed role of Glu183 in activating the water molecule involved in the E2P --> E2 dephosphorylation and suggest a direct participation of the side chains of the TGES loop in the control and facilitation of the insertion of the loop in the catalytic site. The interactions of the TGES loop furthermore seem to facilitate its disengagement from the catalytic site during the E2 --> Ca2E1 transition.

The metal-binding sites of the zinc-transporting P-type ATPase of Escherichia coli. Lys693 and Asp714 in the seventh and eighth transmembrane segments of ZntA contribute to the coupling of metal binding and ATPase activity

ZntA is a P-type ATPase which transports Zn(2+), Pb(2+) and Cd(2+) out of the cell. Two cysteine-containing motifs, CAAC near the N-terminus and CPC in transmembrane helix 6, are involved in binding of the translocated metal. We have studied these motifs by mutating the cysteines to serines. The roles of two other possible metal-binding residues, K(693) and D(714), in transmembrane helices 7 and 8, were also addressed. The mutation CAAC-->SAAS reduces the ATPase activity by 50%. The SAAS mutant is phosphorylated with ATP almost as efficiently as the wild type. However, its phosphorylation with P(i) is poorer than that of the wild type and its dephosphorylation rate is faster than that of the wild type ATPase. The CPC-->SPS mutant is inactive but residual phosphorylation with ATP could still be observed. The most important findings of this work deal with the prospective metal-binding residues K(693) and D(714): the substitution K693N eliminates the Zn(2+)-stimulated ATPase activity completely, although significant Zn(2+)-dependent phosphorylation by ATP remains. The K693N ATPase is hyperphosphorylated by P(i). ZntA carrying the change D714M has strong metal-independent ATPase activity and is very weakly phosphorylated both by ATP and P(i). In conclusion, K(693) and D(714) are functionally essential and appear to contribute to the metal specificity of ZntA, most probably by being parts of the metal-binding site made up by the CPC motif.

Critical hydrophobic interactions between phosphorylation and actuator domains of Ca2+-ATPase for hydrolysis of phosphorylated intermediate

Functional roles of seven hydrophobic residues on the interface between the actuator (A) and phosphorylation (P) domains of sarcoplasmic reticulum Ca2+-ATPase were explored by alanine and serine substitutions. The residues examined were Ile179/Leu180/Ile232 on the A domain, Val705/Val726 on the P domain, and Leu119/Tyr122 on the loop linking the A domain and M2 (the second transmembrane helix). These residues gather to form a hydrophobic cluster around Tyr122 in the crystal structures of Ca2+-ATPase in Ca2+-unbound E2 (unphosphorylated) and E2P (phosphorylated) states but are far apart in those of Ca2+-bound E1 (unphosphorylated) and E1P (phosphorylated) states. The substitution-effects were also compared with those of Ile235 on the A domain/M3 linker and those of T181GE of the A domain, since they are in the immediate vicinity of the Tyr122-cluster. All these substitutions almost completely inhibited ATPase activity without inhibiting Ca2+-activated E1P formation from ATP. Substitutions of Ile235 and T181GE blocked the E1P to E2P transition, whereas those in the Tyr122-cluster blocked the subsequent E2P hydrolysis. Substitutions of Ile235 and Glu183 also blocked EP hydrolysis. Results indicate that the Tyr122-cluster is formed during the E1P to E2P transition to configure the catalytic site and position Glu183 properly for hydrolyzing the acylphosphate. Ile235 on the A domain/M3 linker likely forms hydrophobic interactions with the A domain and thereby allowing the strain of this linker to be utilized for large motions of the A domain during these processes. The Tyr122-cluster, Ile235, and T181GE thus seem to have different roles and are critical in the successive events in processing phosphorylated intermediates to transport Ca2+.

Structural Studies of a Stabilized Phosphoenzyme Intermediate of Ca2+-ATPase

Ca(2+)-ATPase belongs to the family of P-type ATPases and maintains low concentrations of intracellular Ca(2+). Its reaction cycle consists of four main intermediates that alternate ion binding in the transmembrane domain with phosphorylation of an aspartate residue in a cytoplasmic domain. Previous work characterized an ultrastable phosphoenzyme produced first by labeling with fluorescein isothiocyanate, then by allowing this labeled enzyme to establish a maximal Ca(2+) gradient, and finally by removing Ca(2+) from the solution. This phosphoenzyme is characterized by very low fluorescence and has specific enzymatic properties suggesting the existence of a high energy phosphoryl bond. To study the structural properties of this phosphoenzyme, we used cryoelectron microscopy of two-dimensional crystals formed in the presence of decavanadate and determined the structure at 8-A resolution. To our surprise we found that at this resolution the low fluorescence phosphoenzyme had a structure similar to that of the native enzyme crystallized under equivalent conditions. We went on to use glutaraldehyde cross-linking and proteolysis for independent structural assessment and concluded that, like the unphosphorylated native enzyme, Ca(2+) and vanadate exert a strong influence over the global structure of this low fluorescence phosphoenzyme. Based on a structural model with fluorescein isothiocyanate bound at the ATP site, we suggest that the stability as well as the low fluorescence of this phosphoenzyme is due to a fluorescein-mediated cross-link between two cytoplasmic domains that prevents hydrolysis of the aspartyl phosphate. Finally, we consider the alternative possibility that phosphate transfer to fluorescein itself could explain the properties of this low fluorescence species.

Lumenal gating mechanism revealed in calcium pump crystal structures with phosphate analogues

P-type ion transporting ATPases are ATP-powered ion pumps that establish ion concentration gradients across biological membranes. Transfer of bound cations to the lumenal or extracellular side occurs while the ATPase is phosphorylated. Here we report at 2.3 A resolution the structure of the calcium-ATPase of skeletal muscle sarcoplasmic reticulum, a representative P-type ATPase that is crystallized in the absence of Ca2+ but in the presence of magnesium fluoride, a stable phosphate analogue. This and other crystal structures determined previously provide atomic models for all four principal states in the reaction cycle. These structures show that the three cytoplasmic domains rearrange to move six out of ten transmembrane helices, thereby changing the affinity of the Ca2+-binding sites and the gating of the ion pathway. Release of ADP triggers the opening of the lumenal gate and release of phosphate its closure, effected mainly through movement of the A-domain, the actuator of transmembrane gates.

Localization of a K+ -binding site involved in dephosphorylation of the sarcoplasmic reticulum Ca2+ -ATPase

K+ plays an important role for the function of the sarco(endo)plasmic reticulum Ca2+ -ATPase (SERCA), but its binding site within the molecule has remained unidentified. We have located the binding site for a K+ ion in the P-domain by means of x-ray crystallography using crystals prepared in the presence of the K+ congener Rb+. Backbone carbonyls from the loop containing residues 711-715 together with the side chain of Glu732 define the K+/Rb+ site in the Ca2+ -ATPase conformation with bound Ca2+, ADP, and AlF4-. Functional analysis of Ca2+ -ATPase mutants with alterations to Glu732 shows that this site is indeed important for the stimulatory effect of K+ on the dephosphorylation rate. Comparison with the Ca2+ -ATPase in a dephosphorylated E2 conformation suggests that the K+ site is involved in the correct movement and positioning of the A-domain during translocation and dephosphorylation.

Involvement of the L6-7 loop in SERCA1a Ca2+-ATPase activation by Ca2+ (or Sr2+) and ATP

Wild-type (WT) and the double mutant D813A,D818A (ADA) of the L6-7 loop of SERCA1a were expressed in yeast, purified, and reconstituted into lipids. This allowed us to functionally study these ATPases by both kinetic and spectroscopic means, and to solve previous discrepancies in the published literature about both experimental facts and interpretation concerning the role of this loop in P-type ATPases. We show that in a solubilized state, the ADA mutant experiences a dramatic decrease of its calcium-dependent ATPase activity. On the contrary, reconstituted in a lipid environment, it displays an almost unaltered maximal calcium-dependent ATPase activity at high (millimolar) ATP, with an apparent affinity for Ca(2+) altered only moderately (3-fold). In the absence of ATP, the true affinity of ADA for Ca(2+) is, however, more significantly reduced (20-30-fold) compared with WT, as judged from intrinsic (Trp) or extrinsic (fluorescence isothiocyanate) fluorescence experiments. At low ATP, transient kinetics experiments reveal an overshoot in the ADA phosphorylation level primarily arising from the slowing down of the transition between the nonphosphorylated "E2" and "Ca(2)E1" forms of ADA. At high ATP, this slowing down is only partially compensated for, as ADA turnover remains more sensitive to orthovanadate than WT turnover. ADA ATPase also proved to have a reduced affinity for ATP in studies performed under equilibrium conditions in the absence of Ca(2+), highlighting the long range interactions between L6-7 and the nucleotide-binding site. We propose that these mutations in L6-7 could affect protonation-dependent winding and unwinding events in the nearby M6 transmembrane segment.