Topology of the porin MspA in the outer membrane of Mycobacterium smegmatis

The C-terminus is essential for the stability of the mycobacterial channel protein MspA

Outer membrane proteins perform essential functions in uptake and secretion processes in bacteria. MspA is an octameric channel protein in the outer membrane of Mycobacterium smegmatis and is structurally distinct from any other known outer membrane protein. MspA is the founding member of a family with more than 3000 homologs and is one of the most widely used proteins in nanotechnological applications due to its advantageous pore structure and extraordinary stability. While a conserved C-terminal signal sequence is essential for folding and protein assembly in the outer membrane of Gram-negative bacteria, the molecular determinants of these processes are unknown for MspA. In this study, we show that mutation and deletion of methionine 183 in the highly conserved C-terminus of MspA and mutation of the conserved tryptophan 40 lead to a complete loss of protein in heat extracts of M. smegmatis. Swapping these residues partially restores the heat stability of MspA indicating that methionine 183 and tryptophan 40 form a conserved sulfur-π electron interaction, which stabilizes the MspA monomer. Flow cytometry showed that all MspA mutants are surface-accessible demonstrating that oligomerization and membrane integration in M. smegmatis are not affected. Thus, the conserved C-terminus of MspA is essential for its thermal stability, but it is not required for protein assembly in its native membrane, indicating that this process is mediated by a mechanism distinct from that in Gram-negative bacteria. These findings will benefit the rational design of MspA-like pores to tailor their properties in current and future applications.

ESX-3 secretion system in Mycobacterium: An overview

Mycobacteria are microorganisms distributed in the environment worldwide, and some of them, such as Mycobacterium tuberculosis or M. leprae, are pathogenic. The hydrophobic mycobacterial cell envelope has low permeation and bacteria need to export products across their structure. Mycobacteria possess specialized protein secretion systems, such as the Early Secretory Antigenic Target 6 secretion (ESX) system. Five ESX loci have been described in M. tuberculosis, called ESX-1 to ESX-5. The ESX-3 secretion system has been associated with mycobacterial metabolism and growth. The locus of this system is highly conserved across mycobacterial species. Metallo-proteins regulate negative ESX-3 transcription in high conditions of iron and zinc. Moreover, this secretion system is part of an antioxidant regulatory pathway linked to Zinc. EccA3, EccB3, EccC3, EccD3, and EccE3 are components of the ESX-3 secretion machinery, whereas EsxG-EsxH, PE5-PPE4, and PE15-PPE20 are proteins secreted by this system. In addition, EspG3 and MycP3 are complementary proteins involved in transport and proteolysis respectively. This system is associated to mycobacterial virulence by releasing the bacteria from the phagosome and inhibiting endomembrane damage response. Furthermore, components of this system inhibit the host immune response by reducing the recognition of M. tuberculosis-infected cells. The components of the ESX-3 secretion system play a role in drug resistance and cell wall integrity. Moreover, the expression data of this system indicated that external and internal factors affect ESX-3 locus expression. This review provides an overview of new findings on the ESX-3 secretion system, its regulation, expression, and functions.

TMbed: transmembrane proteins predicted through language model embeddings

BACKGROUND

Despite the immense importance of transmembrane proteins (TMP) for molecular biology and medicine, experimental 3D structures for TMPs remain about 4-5 times underrepresented compared to non-TMPs. Today's top methods such as AlphaFold2 accurately predict 3D structures for many TMPs, but annotating transmembrane regions remains a limiting step for proteome-wide predictions.

RESULTS

Here, we present TMbed, a novel method inputting embeddings from protein Language Models (pLMs, here ProtT5), to predict for each residue one of four classes: transmembrane helix (TMH), transmembrane strand (TMB), signal peptide, or other. TMbed completes predictions for entire proteomes within hours on a single consumer-grade desktop machine at performance levels similar or better than methods, which are using evolutionary information from multiple sequence alignments (MSAs) of protein families. On the per-protein level, TMbed correctly identified 94 ± 8% of the beta barrel TMPs (53 of 57) and 98 ± 1% of the alpha helical TMPs (557 of 571) in a non-redundant data set, at false positive rates well below 1% (erred on 30 of 5654 non-membrane proteins). On the per-segment level, TMbed correctly placed, on average, 9 of 10 transmembrane segments within five residues of the experimental observation. Our method can handle sequences of up to 4200 residues on standard graphics cards used in desktop PCs (e.g., NVIDIA GeForce RTX 3060).

CONCLUSIONS

Based on embeddings from pLMs and two novel filters (Gaussian and Viterbi), TMbed predicts alpha helical and beta barrel TMPs at least as accurately as any other method but at lower false positive rates. Given the few false positives and its outstanding speed, TMbed might be ideal to sieve through millions of 3D structures soon to be predicted, e.g., by AlphaFold2.

Pathogen-specific antimicrobials engineered de novo through membrane-protein biomimicry

Precision antimicrobials aim to kill pathogens without damaging commensal bacteria in the host, and thus to cure disease without antibiotic-associated dysbiosis. Here, we report the de novo design of a synthetic host defence peptide that targets a specific pathogen by mimicking key molecular features of the pathogen’s channel-forming membrane proteins. By exploiting physical and structural vulnerabilities within the pathogen’s cellular envelope, we designed a peptide sequence that undergoes instructed tryptophan-zippered assembly within the mycolic-acid rich outer membrane of Mycobacterium tuberculosis (Mtb) to specifically kill the pathogen without collateral toxicity towards lung commensal bacteria or host tissue. These ‘mycomembrane-templated’ assemblies elicit rapid mycobactericidal activity, and enhance the potency of antibiotics by improving their otherwise poor diffusion across the rigid Mtb envelope with respect to agents that exploit transmembrane protein channels for antimycobacterial activity. This biomimetic strategy may aid the design of other narrow-spectrum antimicrobial peptides.

The conserved translation factor LepA is required for optimal synthesis of a porin family in Mycobacterium smegmatis

The recalcitrance of mycobacteria to antibiotic therapy is in part due to its ability to build proteins into a multi-layer cell wall. Proper synthesis of both cell wall constituents and associated proteins is crucial to maintaining cell integrity, and intimately tied to antibiotic susceptibility. How mycobacteria properly synthesize the membrane-associated proteome, however, remains poorly understood. Recently, we found that loss of lepA in Mycobacterium smegmatis (Msm) altered tolerance to rifampin, a drug that targets a non-ribosomal cellular process. LepA is a ribosome-associated GTPase found in bacteria, mitochondria, and chloroplasts, yet its physiological contribution to cellular processes is not clear. To uncover the determinants of LepA-mediated drug tolerance, we characterized the whole-cell proteomes and transcriptomes of a lepA deletion mutant relative to strains with lepA We find that LepA is important for the steady-state abundance of a number of membrane-associated proteins, including an outer membrane porin, MspA, which is integral to nutrient uptake and drug susceptibility. Loss of LepA leads to a decreased amount of porin in the membrane which leads to the drug tolerance phenotype of the lepA mutant. In mycobacteria, the translation factor LepA modulates mycobacterial membrane homeostasis, which in turn affects antibiotic tolerance.ImportanceThe mycobacterial cell wall is a promising target for new antibiotics due to the abundance of important membrane-associated proteins. Defining mechanisms of synthesis of the membrane proteome will be critical to uncovering and validating drug targets. We found that LepA, a universally conserved translation factor, controls the synthesis of a number of major membrane proteins in M. smegmatis LepA primarily controls synthesis of the major porin MspA. Loss of LepA results in decreased permeability through the loss of this porin, including permeability to antibiotics like rifampin and vancomycin. In mycobacteria, regulation from the ribosome is critical for the maintenance of membrane homeostasis and, importantly, antibiotic susceptibility.

Nanopore Fabrication and Application as Biosensors in Neurodegenerative Diseases

Since its conception as an applied biomedical technology nearly 30 years ago, nanopore is emerging as a promising, high-throughput, biomarker-targeted diagnostic tool for clinicians. The attraction of a nanopore-based detection system is its simple, inexpensive, robust, user-friendly, high-throughput blueprint with minimal sample preparation needed prior to analysis. The goal of clinical-based nanopore biosensing is to go from sample acquisition to a meaningful readout quickly. The most extensive work in nanopore applications has been targeted at DNA, RNA, and peptide identification. Although, biosensing of pathological biomarkers, which is covered in this review, is on the rise. This review is broken into two major sections: (i) the current state of existing biological, solid state, and hybrid nanopore systems and (ii) the applications of nanopore biosensors toward detecting neurodegenerative biomarkers.

Protein Export into and across the Atypical Diderm Cell Envelope of Mycobacteria

Mycobacteria, including the infamous pathogen Mycobacterium tuberculosis, are high-GC Gram-positive bacteria with a distinctive cell envelope. Although there is a typical inner membrane, the mycobacterial cell envelope is unusual in having its peptidoglycan layer connected to a polymer of arabinogalactan, which in turn is covalently attached to long-chain mycolic acids that help form a highly impermeable mycobacterial outer membrane. This complex double-membrane, or diderm, cell envelope imparts mycobacteria with unique requirements for protein export into and across the cell envelope for secretion into the extracellular environment. In this article, we review the four protein export pathways known to exist in mycobacteria: two conserved systems that exist in all types of bacteria (the Sec and Tat pathways) and two specialized systems that exist in mycobacteria, corynebacteria, and a subset of low-GC Gram-positive bacteria (the SecA2 and type VII secretion pathways). We describe the progress made over the past 15 years in understanding each of these mycobacterial export pathways, and we highlight the need for research to understand the specific steps of protein export across the mycobacterial outer membrane.

Identification and characterization of a cell wall porin from Gordonia jacobaea

Gordonia jacobaea is a bacterium belonging to the mycolata group characterized by its ability to produce carotenoids. Mycolic acids in the cell wall contribute to reducing the permeability of their envelopes requiring the presence of channel-forming proteins to allow the exchange of hydrophilic molecules with the surrounding medium. Identification and purification of the channel-forming proteins was accomplished by SDS-PAGE, Mass spectrometry and Mass peptide fingerprinting and the channel-forming activity was studied by reconstitution in lipid bilayers. Here, we describe for the first time the presence of a cell-wall protein from G. jacobaea with channel-forming activity. Our results suggest that this protein bears a low similarity to other hypothetical proteins from the genus Gordonia of uncharacterized functions. The channel has an average single-channel conductance of 800 pS in 1 M KCl, is moderately anion-selective, and does not show any voltage dependence for voltages between +100 and -100 mV. The channel characteristics suggest that this protein could be of relevance in the import and export of negatively charged molecules across the cell wall. This could contribute to design treatments for mycobacterial infections, as well as being of interest in biotechnology applications.

Copper homeostasis in Mycobacterium tuberculosis

Copper (Cu) is a trace element essential for the growth and development of almost all organisms, including bacteria. However, Cu overload in most systems is toxic. Studies show Cu accumulates in macrophage phagosomes infected with bacteria, suggesting Cu provides an innate immune mechanism to combat invading pathogens. To counteract the host-supplied Cu, increasing evidence suggests that bacteria have evolved Cu resistance mechanisms to facilitate their pathogenesis. In particular, Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis, has evolved multiple pathways to respond to Cu. Here, we summarize what is currently known about Cu homeostasis in Mtb and discuss potential sources of Cu encountered by this and other pathogens in a mammalian host.

Tailored Polymeric Membranes for Mycobacterium Smegmatis Porin A (MspA) Based Biosensors

Nanopores based on protein channels inserted into lipid membranes have paved the way towards a wide-range of inexpensive biosensors, especially for DNA sequencing. A key obstacle in using these biological ion channels as nanodevices is the poor stability of lipid bilayer membranes. Amphiphilic block copolymer membranes have emerged as a robust alternative to lipid membranes. While previous efforts have shown feasibility, we demonstrate for the first time the effect of polymer composition on MspA protein functionality. We show that membrane-protein interaction depends on the hydrophobic-hydrophilic ratio (f-ratio) of the block copolymer. These effects are particularly pronounced in asymmetric protein pores like MspA compared to the cylindrical α-Hemolysin pore. A key effect of membrane-protein interaction is the increased 1/fα noise. After first showing increases in 1/fα behaviour arise from increased substate activity, the noise power spectral density S(f) was used as a qualitative tool for understanding protein-membrane interactions in polymer membranes. Polymer compositions with f-ratios close to lipid membranes caused noise behaviour not observed in lipid membranes. However, by modifying the f-ratio using a modular synthetic approach, we were able to design a block copolymer exhibiting noise properties similar to a lipid membrane, albeit with better stability. Thus, by careful optimization, block copolymer membranes can emerge as a robust alternative for protein-pore based nano-biosensors.

Take five - Type VII secretion systems of Mycobacteria

Mycobacteria use type VII secretion (T7S) systems to secrete proteins across their complex cell envelope. Pathogenic mycobacteria, such as the notorious pathogen Mycobacterium tuberculosis, have up to five of these secretion systems, named ESX-1 to ESX-5. At least three of these secretion systems are essential for mycobacterial virulence and/or viability. Elucidating T7S is therefore essential to understand the success of M. tuberculosis and other pathogenic mycobacteria as pathogens, and could be instrumental to identify novel targets for drug- and vaccine-development. Recently, significant progress has been achieved in the identification of T7S substrates and a general secretion motif. In addition, a start has been made with unraveling the mechanism of secretion and the structural analysis of the different subunits. This review summarizes these recent findings, which are incorporated in a working model of this complex machinery. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Structural adaptations of proteins to different biological membranes

To gain insight into adaptations of proteins to their membranes, intrinsic hydrophobic thicknesses, distributions of different chemical groups and profiles of hydrogen-bonding capacities (α and β) and the dipolarity/polarizability parameter (π*) were calculated for lipid-facing surfaces of 460 integral α-helical, β-barrel and peripheral proteins from eight types of biomembranes. For comparison, polarity profiles were also calculated for ten artificial lipid bilayers that have been previously studied by neutron and X-ray scattering. Estimated hydrophobic thicknesses are 30-31Å for proteins from endoplasmic reticulum, thylakoid, and various bacterial plasma membranes, but differ for proteins from outer bacterial, inner mitochondrial and eukaryotic plasma membranes (23.9, 28.6 and 33.5Å, respectively). Protein and lipid polarity parameters abruptly change in the lipid carbonyl zone that matches the calculated hydrophobic boundaries. Maxima of positively charged protein groups correspond to the location of lipid phosphates at 20-22Å distances from the membrane center. Locations of Tyr atoms coincide with hydrophobic boundaries, while distributions maxima of Trp rings are shifted by 3-4Å toward the membrane center. Distributions of Trp atoms indicate the presence of two 5-8Å-wide midpolar regions with intermediate π* values within the hydrocarbon core, whose size and symmetry depend on the lipid composition of membrane leaflets. Midpolar regions are especially asymmetric in outer bacterial membranes and cell membranes of mesophilic but not hyperthermophilic archaebacteria, indicating the larger width of the central nonpolar region in the later case. In artificial lipid bilayers, midpolar regions are observed up to the level of acyl chain double bonds.

A hybrid soft solar cell based on the mycobacterial porin MspA linked to a sensitizer-viologen Diad

A prototype of a nano solar cell containing the mycobacterial channel protein MspA has been successfully designed. MspA, an octameric transmembrane channel protein from Mycobacterium smegmatis, is one of the most stable proteins known to date. Eight Ruthenium(II) aminophenanthroline-viologen maleimide Diads (Ru-Diads) have been successfully bound to the MspA mutant MspAA96C via cysteine-maleimide bonds. MspA is known to form double layers in which it acts as nanoscopic surfactant. The nanostructured layer that is formed by (Ru-Diad)8MspA at the TiO2 electrode is photochemically active. The resulting "protein nano solar cell" features an incident photon conversion efficiency of 1% at 400 nm. This can be regarded as a proof-of-principle that stable proteins can be successfully integrated into the design of solar cells.

Adaptation of mycobacteria to growth conditions: a theoretical analysis of changes in gene expression revealed by microarrays

Background

Microarray analysis is a powerful technique for investigating changes in gene expression. Currently, results (r-values) are interpreted empirically as either unchanged or up- or down-regulated. We now present a mathematical framework, which relates r-values to the macromolecular properties of population-average cells. The theory is illustrated by the analysis of published data for two species; namely, Mycobacterium bovis BCG Pasteur and Mycobacterium smegmatis mc² 155. Each species was grown in a chemostat at two different growth rates. Application of the theory reveals the growth rate dependent changes in the mycobacterial proteomes.

Principal Findings

The r-value r_(i) of any ORF (ORF_(i)) encoding protein p_(i) was shown to be equal to the ratio of the concentrations of p_(i) and so directly proportional to the ratio of the numbers of copies of p_(i) per population-average cells of the two cultures. The proportionality constant can be obtained from the ratios DNA: RNA: protein. Several subgroups of ORFs were identified because they shared a particular r-value. Histograms of the number of ORFs versus the expression ratio were simulated by combining the particular r-values of several subgroups of ORFs. The largest subgroup was ORF_(j) (r_(j)  = 1.00± SD) which was estimated to comprise respectively 59% and 49% of ORFs of M. bovis BCG Pasteur and M. smegmatis mc² 155. The standard deviations reflect the properties of the cDNA preparations investigated.

Significance

The analysis provided a quantitative view of growth rate dependent changes in the proteomes of the mycobacteria studied. The majority of the ORFs were found to be constitutively expressed. In contrast, the protein compositions of the outer permeability barriers and cytoplasmic membranes were found to be dependent on growth rate; thus illustrating the response of bacteria to their environment. The theoretical approach applies to any cultivatable bacterium under a wide range of growth conditions.

The role of transport mechanisms in mycobacterium tuberculosis drug resistance and tolerance

In the fight against tuberculosis, cell wall permeation of chemotherapeutic agents remains a critical but largely unsolved question. Here we review the major mechanisms of small molecule penetration into and efflux from Mycobacterium tuberculosis and other mycobacteria, and outline how these mechanisms may contribute to the development of phenotypic drug tolerance and induction of drug resistance. M. tuberculosis is intrinsically recalcitrant to small molecule permeation thanks to its thick lipid-rich cell wall. Passive diffusion appears to account for only a fraction of total drug permeation. As in other bacterial species, influx of hydrophilic compounds is facilitated by water-filled open channels, or porins, spanning the cell wall. However, the diversity and density of M. tuberculosis porins appears lower than in enterobacteria. Besides, physiological adaptations brought about by unfavorable conditions are thought to reduce the efficacy of porins. While intracellular accumulation of selected drug classes supports the existence of hypothesized active drug influx transporters, efflux pumps contribute to the drug resistant phenotype through their natural abundance and diversity, as well as their highly inducible expression. Modulation of efflux transporter expression has been observed in phagocytosed, non-replicating persistent and multi-drug resistant bacilli. Altogether, M. tuberculosis has evolved both intrinsic properties and acquired mechanisms to increase its level of tolerance towards xenobiotic substances, by preventing or minimizing their entry. Understanding these adaptation mechanisms is critical to counteract the natural mechanisms of defense against toxic compounds and develop new classes of chemotherapeutic agents that positively exploit the influx and efflux pathways of mycobacteria.

Unraveling the structure of membrane proteins in situ by transfer function corrected cryo-electron tomography

Cryo-electron tomography in combination with subtomogram averaging allows to investigate the structure of protein assemblies in their natural environment in a close to live state. To make full use of the structural information contained in tomograms it is necessary to analyze the contrast transfer function (CTF) of projections and to restore the phases of higher spatial frequencies. CTF correction is however hampered by the difficulty of determining the actual defocus values from tilt series data, which is due to the low signal-to-noise ratio of electron micrographs. In this study, an extended acquisition scheme is introduced that enables an independent CTF determination. Two high-dose images are recorded along the tilt axis on both sides of each projection, which allow an accurate determination of the defocus values of these images. These values are used to calculate the CTF for each image of the tilt series. We applied this scheme to the mycobacterial outer membrane protein MspA reconstituted in lipid vesicles and tested several variants of CTF estimation in combination with subtomogram averaging and correction of the modulation transfer function (MTF). The 3D electron density map of MspA was compared with a structure previously determined by X-ray crystallography. We were able to demonstrate that structural information up to a resolution of 16.8Å can be recovered using our CTF correction approach, whereas the uncorrected 3D map had a resolution of only 26.2Å.

MspA nanopores from subunit dimers

Mycobacterium smegmatis porin A (MspA) forms an octameric channel and represents the founding member of a new family of pore proteins. Control of subunit stoichiometry is important to tailor MspA for nanotechnological applications. In this study, two MspA monomers were connected by linkers ranging from 17 to 62 amino acids in length. The oligomeric pore proteins were purified from M. smegmatis and were shown to form functional channels in lipid bilayer experiments. These results indicated that the peptide linkers did not prohibit correct folding and localization of MspA. However, expression levels were reduced by 10-fold compared to wild-type MspA. MspA is ideal for nanopore sequencing due to its unique pore geometry and its robustness. To assess the usefulness of MspA made from dimeric subunits for DNA sequencing, we linked two M1-MspA monomers, whose constriction zones were modified to enable DNA translocation. Lipid bilayer experiments demonstrated that this construct also formed functional channels. Voltage gating of MspA pores made from M1 monomers and M1-M1 dimers was identical indicating similar structural and dynamic channel properties. Glucose uptake in M. smegmatis cells lacking porins was restored by expressing the dimeric mspA M1 gene indicating correct folding and localization of M1-M1 pores in their native membrane. Single-stranded DNA hairpins produced identical ionic current blockades in pores made from monomers and subunit dimers demonstrating that M1-M1 pores are suitable for DNA sequencing. This study provides the proof of principle that production of single-chain MspA pores in M. smegmatis is feasible and paves the way for generating MspA pores with altered stoichiometries. Subunit dimers enable better control of the chemical and physical properties of the constriction zone of MspA. This approach will be valuable both in understanding transport across the outer membrane in mycobacteria and in tailoring MspA for nanopore sequencing of DNA.

Surface proteome of "Mycobacterium avium subsp. hominissuis" during the early stages of macrophage infection

"Mycobacterium avium subsp. hominissuis" is a robust and pervasive environmental bacterium that can cause opportunistic infections in humans. The bacterium overcomes the host immune response and is capable of surviving and replicating within host macrophages. Little is known about the bacterial mechanisms that facilitate these processes, but it can be expected that surface-exposed proteins play an important role. In this study, the selective biotinylation of surface-exposed proteins, streptavidin affinity purification, and shotgun mass spectrometry were used to characterize the surface-exposed proteome of M. avium subsp. hominissuis. This analysis detected more than 100 proteins exposed at the bacterial surface of M. avium subsp. hominissuis. Comparisons of surface-exposed proteins between conditions simulating early infection identified several groups of proteins whose presence on the bacterial surface was either constitutive or appeared to be unique to specific culture conditions. This proteomic profile facilitates an improved understanding of M. avium subsp. hominissuis and how it establishes infection. Additionally, surface-exposed proteins are excellent targets for the host adaptive immune system, and their identification can inform the development of novel treatments, diagnostic tools, and vaccines for mycobacterial disease.

Mycobacterial outer membranes: in search of proteins

The cell wall is a major virulence factor of Mycobacterium tuberculosis and contributes to its intrinsic drug resistance. Recently, cryo-electron microscopy showed that mycobacterial cell wall lipids form an unusual outer membrane. Identification of the components of the uptake and secretion machinery across this membrane will be crucial for understanding the physiology and pathogenicity of M. tuberculosis and for the development of better anti-tuberculosis drugs. Although the genome of M. tuberculosis appears to encode over 100 putative outer membrane proteins, only a few have been identified and characterized. Here, we summarize the current knowledge on the structure of the mycobacterial outer membrane and its known proteins. Through comparison to transport processes in Gram-negative bacteria, we highlight several hypothetical outer membrane proteins of M. tuberculosis that await discovery.

Physiology of mycobacteria

Mycobacterium tuberculosis is a prototrophic, metabolically flexible bacterium that has achieved a spread in the human population that is unmatched by any other bacterial pathogen. The success of M. tuberculosis as a pathogen can be attributed to its extraordinary stealth and capacity to adapt to environmental changes throughout the course of infection. These changes include: nutrient deprivation, hypoxia, various exogenous stress conditions and, in the case of the pathogenic species, the intraphagosomal environment. Knowledge of the physiology of M. tuberculosis during this process has been limited by the slow growth of the bacterium in the laboratory and other technical problems such as cell aggregation. Advances in genomics and molecular methods to analyze the M. tuberculosis genome have revealed that adaptive changes are mediated by complex regulatory networks and signals, resulting in temporal gene expression coupled to metabolic and energetic changes. An important goal for bacterial physiologists will be to elucidate the physiology of M. tuberculosis during the transition between the diverse conditions encountered by M. tuberculosis. This review covers the growth of the mycobacterial cell and how environmental stimuli are sensed by this bacterium. Adaptation to different environments is described from the viewpoint of nutrient acquisition, energy generation, and regulation. To gain quantitative understanding of mycobacterial physiology will require a systems biology approach and recent efforts in this area are discussed.

Functions of the periplasmic loop of the porin MspA from Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis and mediates diffusion of small and hydrophilic solutes across the outer membrane. The octameric structure of MspA, its sharply defined constriction zone, and a large periplasmic loop L6 represent novel structural features. L6 consists of 13 amino acids and is directly adjacent to the constriction zone. Deletion of 3, 5, 7, 9, and 11 amino acids of the L6 loop resulted in functional pores that restored glucose uptake and growth of a porin mutant of M. smegmatis. Lipid bilayer experiments revealed that all mutant channels were noisier than wild type (wt) MspA, indicating that L6 is required for pore stability in vitro. Voltage gating of the Escherichia coli porin OmpF was attributed to loops that collapse into the channel in response to a strong electrical field. Here, we show that deletion mutants Delta7, Delta9, and Delta11 had critical voltages similar to wt MspA. This demonstrated that the L6 loop is not the primary voltage-dependent gating mechanism of MspA. Surprisingly, large deletions in L6 resulted in 3-6-fold less extractable pores, whereas small deletions did not alter expression levels of MspA. Pores with large deletions in L6 were more permissive for glucose than smaller deletion mutants, whereas their single channel conductance was similar to that of wt MspA. These results indicate that translocation of ions through the MspA pore is governed by different mechanisms than that of neutral solutes. This is the first study identifying a molecular determinant of solute translocation in a mycobacterial porin.

Characterisation of porin genes from Mycobacterium fortuitum and their impact on growth

Background

Highly pathogenic mycobacteria like Mycobacterium tuberculosis are characterised by their slow growth and their ability to reside and multiply in the very hostile phagosomal environment and a correlation between the growth rate of mycobacteria and their pathogenicity has been hypothesised. Here, porin genes from M. fortuitum were cloned and characterised to address their impact on the growth rate of fast-growing and pathogenic mycobacteria.

Results

Two genes encoding porins orthologous to MspA from M. smegmatis, porM1 and porM2, were cloned from M. fortuitum strains, which were originally isolated from human patients. Both porin genes were at least partially able to complement the mutations of a M. smegmatis mutant strain lacking the genes mspA and mspC with respect to the growth rate. PorM1 and porM2 were present in different strains of M. fortuitum including the type strain. Comparative expression analysis of porM genes revealed divergent porin expression among analysed M. fortuitum strains. Repression of the expression of porins by antisense technique decreased the growth rates of different M. fortuitum. The effects of over-expression of porM1 as well as porM2 varied depending on the strain and the concentration of antibiotic added to the medium and indicated that PorM1 and PorM2 enhance the growth of M. fortuitum strains, but also the diffusion of the antibiotic kanamycin into the cells.

Conclusion

This study demonstrates the important role of porin expression in growth as well as antibiotic susceptibility of the opportunistic bacterium M. fortuitum.

Single-molecule DNA detection with an engineered MspA protein nanopore

Nanopores hold great promise as single-molecule analytical devices and biophysical model systems because the ionic current blockades they produce contain information about the identity, concentration, structure, and dynamics of target molecules. The porin MspA of Mycobacterium smegmatis has remarkable stability against environmental stresses and can be rationally modified based on its crystal structure. Further, MspA has a short and narrow channel constriction that is promising for DNA sequencing because it may enable improved characterization of short segments of a ssDNA molecule that is threaded through the pore. By eliminating the negative charge in the channel constriction, we designed and constructed an MspA mutant capable of electronically detecting and characterizing single molecules of ssDNA as they are electrophoretically driven through the pore. A second mutant with additional exchanges of negatively-charged residues for positively-charged residues in the vestibule region exhibited a factor of approximately 20 higher interaction rates, required only half as much voltage to observe interaction, and allowed ssDNA to reside in the vestibule approximately 100 times longer than the first mutant. Our results introduce MspA as a nanopore for nucleic acid analysis and highlight its potential as an engineerable platform for single-molecule detection and characterization applications.

Direct visualization of the outer membrane of mycobacteria and corynebacteria in their native state

The cell envelope of mycobacteria, which include the causative agents of tuberculosis and leprosy, is crucial for their success as pathogens. Despite a continued strong emphasis on identifying the multiple chemical components of this envelope, it has proven difficult to combine its components into a comprehensive structural model, primarily because the available ultrastructural data rely on conventional electron microscopy embedding and sectioning, which are known to induce artifacts. The existence of an outer membrane bilayer has long been postulated but has never been directly observed by electron microscopy of ultrathin sections. Here we have used cryo-electron microscopy of vitreous sections (CEMOVIS) to perform a detailed ultrastructural analysis of three species belonging to the Corynebacterineae suborder, namely, Mycobacterium bovis BCG, Mycobacterium smegmatis, and Corynebacterium glutamicum, in their native state. We provide new information that accurately describes the different layers of the mycobacterial cell envelope and challenges current models of the organization of its components. We show a direct visualization of an outer membrane, analogous to that found in gram-negative bacteria, in the three bacterial species examined. Furthermore, we demonstrate that mycolic acids, the hallmark of mycobacteria and related genera, are essential for the formation of this outer membrane. In addition, a granular layer and a low-density zone typifying the periplasmic space of gram-positive bacteria are apparent in CEMOVIS images of mycobacteria and corynebacteria. Based on our observations, a model of the organization of the lipids in the outer membrane is proposed. The architecture we describe should serve as a reference for future studies to relate the structure of the mycobacterial cell envelope to its function.

Nutrient acquisition by mycobacteria

The growth and nutritional requirements of mycobacteria have been intensively studied since the discovery of Mycobacterium tuberculosis more than a century ago. However, the identity of many transporters for essential nutrients of M. tuberculosis and other mycobacteria is still unknown despite a wealth of genomic data and the availability of sophisticated genetic tools. Recently, considerable progress has been made in recognizing that two lipid permeability barriers have to be overcome in order for a nutrient molecule to reach the cytoplasm of mycobacteria. Uptake processes are discussed by comparing M. tuberculosis with Mycobacterium smegmatis. For example, M. tuberculosis has only five recognizable carbohydrate transporters in the inner membrane, while M. smegmatis has 28 such transporters at its disposal. The specificities of inner-membrane transporters for sulfate, phosphate and some amino acids have been determined. Outer-membrane channel proteins in both organisms are thought to contribute to nutrient uptake. In particular, the Msp porins have been shown to be required for uptake of carbohydrates, amino acids and phosphate by M. smegmatis. The set of porins also appears to be different for M. tuberculosis and M. smegmatis. These differences likely reflect the lifestyles of these mycobacteria and the availability of nutrients in their natural habitats: the soil and the human body. The comprehensive identification and the biochemical and structural characterization of the nutrient transporters of M. tuberculosis will not only promote our understanding of the physiology of this important human pathogen, but might also be exploited to improve tuberculosis chemotherapy.

Identification of outer membrane proteins of Mycobacterium tuberculosis

The cell wall of mycobacteria includes an unusual outer membrane of extremely low permeability. While Escherichia coli uses more than 60 proteins to functionalize its outer membrane, only two mycobacterial outer membrane proteins (OMPs) are known. The porin MspA of Mycobacterium smegmatis provided the proof of principle that integral mycobacterial OMPs share the beta-barrel structure, the absence of hydrophobic alpha-helices and the presence of a signal peptide with OMPs of gram-negative bacteria. These properties were exploited in a multi-step bioinformatic approach to predict OMPs of M. tuberculosis. A secondary structure analysis was performed for 587 proteins of M. tuberculosis predicted to be exported. Scores were calculated for the beta-strand content and the amphiphilicity of the beta-strands. Reference OMPs of gram-negative bacteria defined threshold values for these parameters that were met by 144 proteins of unknown function of M. tuberculosis. Two of them were verified as OMPs by a novel two-step experimental approach. Rv1698 and Rv1973 were detected only in the total membrane fraction of M. bovis BCG in Western blot experiments, while proteinase K digestion of whole cells showed the surface accessibility of these proteins. These findings established that Rv1698 and Rv1973 are indeed localized in the outer membrane and tripled the number of known OMPs of M. tuberculosis. Significantly, these results provide evidence for the usefulness of the bioinformatic approach to predict mycobacterial OMPs and indicate that M. tuberculosis likely has many OMPs with beta-barrel structure. Our findings pave the way to identify the set of proteins which functionalize the outer membrane of M. tuberculosis.

Disclosure of the mycobacterial outer membrane: cryo-electron tomography and vitreous sections reveal the lipid bilayer structure

The cell walls of mycobacteria form an exceptional permeability barrier, and they are essential for virulence. They contain extractable lipids and long-chain mycolic acids that are covalently linked to peptidoglycan via an arabinogalactan network. The lipids were thought to form an asymmetrical bilayer of considerable thickness, but this could never be proven directly by microscopy or other means. Cryo-electron tomography of unperturbed or detergent-treated cells of Mycobacterium smegmatis embedded in vitreous ice now reveals the native organization of the cell envelope and its delineation into several distinct layers. The 3D data and the investigation of ultrathin frozen-hydrated cryosections of M. smegmatis, Myobacterium bovis bacillus Calmette-Guérin, and Corynebacterium glutamicum identified the outermost layer as a morphologically symmetrical lipid bilayer. The structure of the mycobacterial outer membrane necessitates considerable revision of the current view of its architecture. Conceivable models are proposed and discussed. These results are crucial for the investigation and understanding of transport processes across the mycobacterial cell wall, and they are of particular medical relevance in the case of pathogenic mycobacteria.

PE is a functional domain responsible for protein translocation and localization on mycobacterial cell wall

The PE family of Mycobacterium tuberculosis includes 98 proteins which share a highly homologous N-terminus sequence of about 110 amino acids (PE domain). Depending on the C-terminal domain, the PE family can be divided in three subfamilies, the largest of which is the PE_PGRS with 61 members. In this study, we determined the cellular localization of three PE proteins by cell fractionation and immunoelectron microscopy by expressing chimeric epitope-tagged recombinant proteins in Mycobacterium smegmatis. We demonstrate that the PE domain of PE_PGRS33 and PE11 (a protein constituted by the only PE domain) contains the information necessary for cell wall localization, and that they can be used as N-terminal fusion partners to deliver a sufficiently long C-terminus-linked protein domain on the mycobacterial cell surface. Indeed, we demonstrate that PE_PGRS33 and Rv3097c (a lipase belonging to the PE family) are surface exposed and localize in the mycobacterial cell wall. Moreover, we found that PE_PGRS33 is easily extractable by detergents suggesting its localization in the mycobacterial outer membrane. Beyond defining the cellular localization of these proteins, and a function for their PE domains, these data open the interesting possibility to construct recombinant mycobacteria expressing heterologous antigens on their surface for vaccine purposes.

The N-terminal domain of OmpATb is required for membrane translocation and pore-forming activity in mycobacteria

OmpATb is the prototype of a new family of porins in Mycobacterium tuberculosis and Mycobacterium bovis BCG. Although the pore-forming activity of this protein has been clearly established by using recombinant protein produced in Escherichia coli, characterization of the native porin has been hampered by the scarce amount of protein present in the M. tuberculosis detergent extracts. To this aim, we have developed a protocol to overproduce and obtain high yields of OmpATb in both Mycobacterium smegmatis and M. bovis BCG. The protein could be extracted and purified from the cell wall fraction and subsequently used for analysis of the pore-forming activity in multichannel and single-channel conductance experiments. Our results indicate that OmpATb produced in mycobacteria presents an average conductance value of 1,600+/-100 pS, slightly higher than that of OmpATb produced in E. coli, suggesting the occurrence of OmpATb in a highly ordered organization within the mycobacterial cell wall. In contrast to OmpATb, a truncated form lacking the first 72 amino acids (OmpATb73-326) was essentially found in the cytosol and was not active in planar lipid bilayers. This suggested that the N-terminal domain of OmpATb could participate in targeting of OmpATb to the cell wall. This was further confirmed by analyzing M. smegmatis clones expressing a chimeric protein consisting of a fusion between the N-terminal domain of OmpATb and the E. coli PhoA reporter. The present study shows for the first time that the N terminus of OmpATb is required for targeting the porin to the cell wall and also appears to be essential for its pore-forming activity.

Characterization of nanostructured surfaces generated by reconstitution of the porin MspA from Mycobacterium smegmatis

Nanostructures with long-term stability at the surface of gold electrodes are generated by reconstituting the porin MspA from Mycobacterium smegmatis into a specially designed monolayer of long-chain lipid surfactant on gold. Tailored surface coverage of gold electrodes with long-chain surfactants is achieved by electrochemically assisted deposition of organic thiosulfates (Bunte salts). The subsequent reconstitution of the octameric-pore MspA is guided by its extraordinary self-assembling properties. Importantly, electrochemical reduction of copper(II) yields copper nanoparticles within the MspA nanopores. Electrochemical impedance spectroscopy, reflection electron microscopy, and atomic force microscopy (AFM) show that: 1) the MspA pores within the self-assembled monolayer (SAM) are monodisperse and electrochemically active, 2) MspA reconstitutes in SAMs and with a 10-nm thickness, 3) AFM is a suitable method to detect pores within SAMs, and 4) the electrochemical reduction of Cu2+ to Cu0 under overpotential conditions starts within the MspA pores.

Expression of the major porin gene mspA is regulated in Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis and is important for diffusion of small and hydrophilic solutes across its unique outer membrane. The start point of transcription of the mspA gene was mapped by primer extension and S1 nuclease experiments. The main promoter driving transcription of mspA was identified by single point mutations in lacZ fusions and resembled sigma(A) promoters of M. smegmatis. However, a 500-bp upstream fragment including P(mspA) in a transcriptional fusion with lacZ yielded only low beta-galactosidase activity, whereas activity increased 12-fold with a 700-bp fragment. Activation of P(mspA) by the 200-bp element was almost eliminated by increasing the distance by 14 bp, indicating binding of an activator protein. The chromosomal mspA transcript had a size of 900 bases and was very stable with a half-life of 6 minutes, whereas the stabilities of episomal mspA transcripts with three other 5' untranslated region (UTRs) were three- to sixfold reduced, indicating a stabilizing role of the native 5' UTR of mspA. Northern blot experiments revealed that the amount of mspA mRNA was increased under nitrogen limitation but reduced under carbon and phosphate limitation at 42 degrees C in stationary phase in the presence of 0.5 M sodium chloride, 18 mM hydrogen peroxide, and 10% ethanol and at acidic pH. These results show for the first time that M. smegmatis regulates porin gene expression to optimize uptake of certain nutrients and to protect itself from toxic solutes.