Structural basis for recognition of CD20 by therapeutic antibody Rituximab

Peptide-based CE-SELEX enables convenient isolation of aptamers specifically recognizing CD20-expressing cells

The CD20 antigen is a key target for several diseases including lymphoma and autoimmune diseases. For over 20 years, several monoclonal antibodies were developed to treat CD20-related disorders. As many therapeutic proteins, their clinical use is however limited due to their nature with a costly biotechnological procedure and side effects such as the production of anti-drug neutralizing antibodies. Nucleic acid aptamers have some advantages over mAbs and are currently investigated for clinical use. We herein report the selection of DNA aptamer by using a peptide-based CE-SELEX (Capillary Electrophoresis-Systematic Evolution of Ligands by Exponential Enrichment) method. It was demonstrated that these aptamers bind specifically a CD20-expressing human cell line, with Kd estimated from isothermal titration calorimetry experiments in the micromolar range. This study demonstrates that the CE-SELEX is suitable as alternative method to the conventional Cell-SELEX to discover new cell-targeting compounds.

CDR grafting and site-directed mutagenesis approach for the generation and affinity maturation of Anti-CD20 nanobody

BACKGROUND

Recently, new and advanced techniques have been adopted to design and produce nanobodies, which are used in diagnostic and immunotherapy treatments. Traditionally, nanobodies are prepared from camelid immune libraries that require animal treatments. However, such approaches require large library sizes and complicated selection procedures. The current study has employed CDR grafting and site-directed mutagenesis techniques to create genetically engineered nanobodies against the tumor marker CD20 (anti-CD20 nanobodies) used in leukemia treatment.

METHODS AND RESULTS

In this study, we utilized the swapping method to graft CDRs from the VH Rituximab antibody to VHH CDRs. We aimed to enhance the binding affinity of the nanobodies by substituting the amino acids (Y101R-Y102R-Y107R) in the VHH-CDR3. To assess the binding capacity of the mutated nanobodies, we conducted an ELISA test. Moreover, through flow cytometry analysis, we compared the fluorescence intensity of the grafted CD20 and mutant nanobodies with that of the commercially available human anti-CD20 in Raji cells. The results showed a significant difference in the fluorescence intensity of the grafted nanobodies and mutant nanobodies when compared to the commercially available human anti-CD20.

CONCLUSION

The approach we followed in this study makes it possible to create multiple anti-CD20 nanobodies with varying affinities without the need for extensive selection efforts. Additionally, our research has demonstrated that computational tools are highly reliable in designing functional nanobodies.

Loss of CD20 expression as a mechanism of resistance to mosunetuzumab in relapsed/refractory B-cell lymphomas

ABSTRACT

CD20 is an established therapeutic target in B-cell malignancies. The CD20 × CD3 bispecific antibody mosunetuzumab has significant efficacy in B-cell non-Hodgkin lymphomas (NHLs). Because target antigen loss is a recognized mechanism of resistance, we evaluated CD20 expression relative to clinical response in patients with relapsed and/or refractory NHL in the phase 1/2 GO29781 trial investigating mosunetuzumab monotherapy. CD20 was studied using immunohistochemistry (IHC), RNA sequencing, and whole-exome sequencing performed centrally in biopsy specimens collected before treatment at predose, during treatment, or upon progression. Before treatment, most patients exhibited a high proportion of tumor cells expressing CD20; however, in 16 of 293 patients (5.5%) the proportion was <10%. Analyses of paired biopsy specimens from patients on treatment revealed that CD20 levels were maintained in 29 of 30 patients (97%) vs at progression, where CD20 loss was observed in 11 of 32 patients (34%). Reduced transcription or acquisition of truncating mutations explained most but not all cases of CD20 loss. In vitro modeling confirmed the effects of CD20 variants identified in clinical samples on reduction of CD20 expression and missense mutations in the extracellular domain that could block mosunetuzumab binding. This study expands the knowledge about the occurrence of target antigen loss after anti-CD20 therapeutics to include CD20-targeting bispecific antibodies and elucidates mechanisms of reduced CD20 expression at disease progression that may be generalizable to other anti-CD20 targeting agents. These results also confirm the utility of readily available IHC staining for CD20 as a tool to inform clinical decisions. This trial was registered at www.ClinicalTrials.gov as #NCT02500407.

Online Coupling of Size Exclusion Chromatography to Capillary Enhanced Raman Spectroscopy for the Analysis of Proteins and Biopharmaceutical Drug Products

The online coupling of size exclusion chromatography (SEC) to capillary enhanced Raman spectroscopy (CERS) based on a liquid core waveguide (LCW) flow cell was applied for the first time to assess the higher-order structure of different proteins. This setup allows recording of Raman spectra of the monomeric protein within complex mixtures, since SEC enables the separation of the monomeric protein from matrix components such as excipients of a biopharmaceutical product and higher molecular weight species (e.g., aggregates). The acquired Raman spectra were used for structural elucidation of well characterized proteins such as bovine serum albumin, hen egg white lysozyme, and β-lactoglobulin and of the monoclonal antibody rituximab in a medicinal product. Additionally, the CERS detection of the disaccharide sucrose, which is used as a stabilizing excipient, was quantified to achieve a limit of detection (LOD) of 120 μg and a limit of quantification (LOQ) of 363 μg injected on the column.

Method validation and new peak detection for the liquid chromatography-mass spectrometry multi-attribute method

The multi-attribute method (MAM) is a liquid chromatography-mass spectrometry (LC-MS) peptide mapping technique that has been proposed as a replacement for several conventional quality control (QC) methods for therapeutic proteins. In addition to quantification of multiple product quality attributes (PQAs), MAM can also monitor impurities using a new peak detection (NPD) feature. Here, results are provided from method validation and NPD studies of an MAM approach applied to rituximab as a model monoclonal antibody (mAb). Twenty-one rituximab PQAs were monitored, including oxidation, pyroglutamination, deamidation, lysine clipping, and glycosylation. The PQA monitoring aspect of the method was validated according to ICH Guidance. Accuracy, precision, specificity, detection and quantitation limits, linearity, range, and robustness were demonstrated for this MAM approach with minimal issues. All PQAs were successfully validated except for several oxidation sites, which did not pass intermediate precision criteria. The variability found in oxidation measurements was attributed to artificial oxidation during sample preparation and could likely be alleviated through several approaches. The NPD aspect of the method was also evaluated. A spike-in approach was used to assess the limits of detection and quantitation (LOD/LOQ) of the NPD feature of MAM. For NPD, the peak intensity threshold was found to be the most critical parameter for accurate detection of impurities since a low threshold can result in false positives while a high threshold can obscure the detection of true peaks. Overall, the MAM approach presented and validated here has been demonstrated to be suitable for both targeted monitoring of rituximab PQAs and non-targeted detection of new peaks that represent impurities.

Raman Spectroscopic Analysis of Highly-Concentrated Antibodies under the Acid-Treated Conditions

PURPOSE

Antibody drugs are usually formulated as highly-concentrated solutions, which would easily generate aggregates, resulting in loss of efficacy. Although low pH increases the colloidal dispersion of antibodies, acid denaturation can be an issue. Therefore, knowing the physical properties at low pH under high concentration conditions is important.

METHODS

Raman spectroscopy was used to investigate pH-induced conformational changes of antibodies at 50 mg/ml. Experiments in pH 3 to 7 were performed for human serum IgG and recombinant rituximab.

RESULTS

We detected the evident changes at pH 3 in Tyr and Trp bands, which are the sensitive markers of intermolecular interactions. Thermal transition analysis over the pH range demonstrated that the thermal transition temperature (Tm) was highest at pH 3. Acid-treated and neutralized one showed higher Tm than that of pH 7, indicating that their extent of intermolecular interactions correlated with the Tm values. Onset temperature was clearly different between concentrated and diluted samples. Colloidal analyses confirmed the findings of the Raman analysis.

CONCLUSION

Our studies demonstrated the positive correlation between Raman analysis and colloidal information, validating as a method for evaluating antibody conformation associated with aggregation propensities.

Targeted Anticancer Agent with Original Mode of Action Prepared by Supramolecular Assembly of Antibody Oligonucleotide Conjugates and Cationic Nanoparticles

Despite their clinical success, Antibody-Drug Conjugates (ADCs) are still limited to the delivery of a handful of cytotoxic small-molecule payloads. Adaptation of this successful format to the delivery of alternative types of cytotoxic payloads is of high interest in the search for novel anticancer treatments. Herein, we considered that the inherent toxicity of cationic nanoparticles (cNP), which limits their use as oligonucleotide delivery systems, could be turned into an opportunity to access a new family of toxic payloads. We complexed anti-HER2 antibody-oligonucleotide conjugates (AOC) with cytotoxic cationic polydiacetylenic micelles to obtain Antibody-Toxic-Nanoparticles Conjugates (ATNPs) and studied their physicochemical properties, as well as their bioactivity in both in vitro and in vivo HER2 models. After optimising their AOC/cNP ratio, the small (73 nm) HER2-targeting ATNPs were found to selectively kill antigen-positive SKBR-2 cells over antigen-negative MDA-MB-231 cells in serum-containing medium. Further in vivo anti-cancer activity was demonstrated in an SKBR-3 tumour xenograft model in BALB/c mice in which stable 60% tumour regression could be observed just after two injections of 45 pmol of ATNP. These results open interesting prospects in the use of such cationic nanoparticles as payloads for ADC-like strategies.

Hypogammaglobulinemia, late-onset neutropenia, and infections following rituximab

Rituximab is a chimeric anti-CD20 monoclonal antibody that targets CD20-expressing B lymphocytes, has a well-defined efficacy and safety profile, and is broadly used to treat a wide array of diseases. In this review, we cover the mechanism of action of rituximab and focus on hypogammaglobulinemia and late-onset neutropenia-2 immune effects secondary to rituximab-and subsequent infection. We review risk factors and highlight key considerations for immunologic monitoring and clinical management of rituximab-induced secondary immune deficiencies. In patients treated with rituximab, monitoring for hypogammaglobulinemia and infections may help to identify the subset of patients at high risk for developing poor B cell reconstitution, subsequent infections, and adverse complications. These patients may benefit from early interventions such as vaccination, antibacterial prophylaxis, and immunoglobulin replacement therapy. Systematic evaluation of immunoglobulin levels and peripheral B cell counts by flow cytometry, both at baseline and periodically after therapy, is recommended for monitoring. In addition, in those patients with prolonged hypogammaglobulinemia and increased infections after rituximab use, immunologic evaluation for inborn errors of immunity may be warranted to further risk stratification, increase monitoring, and assist in therapeutic decision-making. As the immunologic effects of rituximab are further elucidated, personalized approaches to minimize the risk of adverse reactions while maximizing benefit will allow for improved care of patients with decreased morbidity and mortality.

Immune tolerance breakdown in inborn errors of immunity: Paving the way to novel therapeutic approaches

Up to 25% of the patients with inborn errors of immunity (IEI) also exhibit immunodysregulatory features. The association of immune dysregulation and immunodeficiency may be explained by different mechanisms. The understanding of mechanisms underlying immune dysregulation in IEI has paved the way for the development of targeted treatments. In this review article, we will summarize the mechanisms of immune tolerance breakdown and the targeted therapeutic approaches to immune dysregulation in IEI.

Structural Investigation of Therapeutic Antibodies Using Hydroxyl Radical Protein Footprinting Methods

Commercial monoclonal antibodies are growing and important components of modern therapies against a multitude of human diseases. Well-known high-resolution structural methods such as protein crystallography are often used to characterize antibody structures and to determine paratope and/or epitope binding regions in order to refine antibody design. However, many standard structural techniques require specialized sample preparation that may perturb antibody structure or require high concentrations or other conditions that are far from the conditions conducive to the accurate determination of antigen binding or kinetics. We describe here in this minireview the relatively new method of hydroxyl radical protein footprinting, a solution-state method that can provide structural and kinetic information on antibodies or antibody-antigen interactions useful for therapeutic antibody design. We provide a brief history of hydroxyl radical footprinting, examples of current implementations, and recent advances in throughput and accessibility.

Cyclic constrained immunoreactive peptides from crucial P. falciparum proteins: potential implications in malaria diagnostics

Malaria is still a global challenge with significant morbidity and mortality, especially in the African, South-East Asian, and Latin American regions. Malaria diagnosis is a crucial pillar in the control and elimination efforts, often accomplished by the administration of mass-scale Rapid diagnostic tests (RDTs). The inherent limitations of RDTs- insensitivity in scenarios of low transmission settings and deletion of one of the target proteins- Histidine rich protein 2/3 (HRP-2/3) are evident from multiple reports, thus necessitating the need to explore novel diagnostic tools/targets. The present study used peptide microarray to screen potential epitopes from 13 antigenic proteins (CSP, EXP1, LSA1, TRAP, AARP, AMA1, GLURP, MSP1, MSP2, MSP3, MSP4, P48/45, HAP2) of P. falciparum. Three cyclic constrained immunoreactive peptides- C6 (EXP1), A8 (MSP2), B7 (GLURP) were identified from 5458 cyclic constrained peptides (in duplicate) against P. falciparum-infected sera. Peptides (C6, A8, B7- cyclic constrained) and (G11, DSQ, NQN- corresponding linear peptides) were fairly immunoreactive towards P. falciparum-infected sera in dot-blot assay. Using direct ELISA, cyclic constrained peptides (C6 and B7) were found to be specific to P. falciparum-infected sera. A substantial number of samples were tested and the peptides successfully differentiated the P. falciparum positive and negative samples with high confidence. In conclusion, the study identified 3 cyclic constrained immunoreactive peptides (C6, B7, and A8) from P. falciparum secretory/surface proteins and further validated for diagnostic potential of 2 peptides (C6 and B7) with field-collected P. falciparum-infected sera samples.

An In Vitro Selection Platform to Identify Multiple Aptamers against Multiple Cell-Surface Markers Using Ligand-Guided Selection

Aptamer ligand discovery against multiple molecules expressed on whole cells is an essential component in molecular tool development. However, owing to their intrinsic structural characteristics, cell-surface receptors have proven to be challenging targets in ligand discovery. Several variants to systematic evolution of ligands by exponential enrichment (SELEX) have been introduced to address the ″target problem″ for aptamer screening. To this end, we introduced a variant of SELEX, termed ligand-guided selection (LIGS), to identify highly specific aptamers against complex cell-surface markers in their native state. So far, the application of LIGS has been aimed at identifying aptamers against the most dominant receptors on the cell surface. Here, we report that LIGS can be expanded to identify two receptors on the same cell surface, paving the way to generate a multiplexed ligand discovery platform based on SELEX-targeting membrane receptors in their native functional state. Using CD19 and CD20 expressed on Toledo cells as a model system, multiple aptamer families were evolved against Toledo cells. We then utilized two monoclonal antibodies (mAbs) against CD20 and CD19 to selectively partition specific aptamers against CD19 and CD20. Following biochemical characterization, we introduce two specific aptamers against CD19 and two specific aptamers against CD20 with high affinity. Multi-target LIGS, as reported here, demonstrates a successful combinatorial approach for nucleic acid library screening to generate multiple artificial nucleic acid ligands against multiple receptors expressed on a single cell.

Effect of an intermolecular disulfide bond introduced into the first loop of CH1 domain of Adalimumab Fab on thermal stability and antigen-binding activity

The introduction of intermolecular disulfide bonds by amino acid mutations is an effective method for stabilizing dimeric proteins. X-ray crystal structure of Fab of a therapeutic antibody, adalimumab, revealed the first loop of the CH1 domain to be partially unsolved at position 135-141. To find new sites for the introduction of intermolecular disulfide bonds in adalimumab Fab, Fab mutants targeting the unsolved region were predicted using molecular simulation software. Four Fab mutants, H:K137C-L:I117C, H:K137C-L:F209C, H:S138C-L:F116C, and H:S140C-L:S114C, were expressed in the methylotrophic yeast Pichia pastoris. SDS-PAGE analysis of these mutants indicated that H:K137C-L:F209C, H:S138C-L:F116C, and H:S140C-L:S114C mutants mostly formed intermolecular disulfide bonds, whereas some H:K137C-L:I117C mutants formed intermolecular disulfide bonds and some did not. DSC measurements showed increased thermal stability in all Fab mutants with engineered disulfide bonds. The bio-layer interferometry measurements, for binding of the antigen tumor necrotic factor α, indicated that Fab mutants had less antigen-binding activity than wild-type Fab. In particular, the KD value of H:K137C-L:F209C was approximately 17-times higher than that of wild-type Fab. Thus, we successfully introduced intermolecular disulfide bonds between the first loop region of the CH1 and CL domains and observed that it increases the thermostability of Fab and affects the antigen-binding activity.

Structural Characterization of the Full-Length Anti-CD20 Antibody Rituximab

Rituximab, a murine–human chimera, is the first monoclonal antibody (mAb) developed as a therapeutic agent to target CD20 protein. Its Fab domain and its interaction with CD20 have been extensively studied and high-resolution atomic models obtained by X-ray diffraction or cryo-electron microscopy are available. However, the structure of the full-length antibody is still missing as the inherent protein flexibility hampers the formation of well-diffracting crystals and the reconstruction of 3D microscope images. The global structure of rituximab from its dilute solution is here elucidated by small-angle X-ray scattering (SAXS). The limited data resolution achievable by this technique has been compensated by intensive computational modelling that led to develop a new and effective procedure to characterize the average mAb conformation as well as that of the single domains. SAXS data indicated that rituximab adopts an asymmetric average conformation in solution, with a radius of gyration and a maximum linear dimension of 52 Å and 197 Å, respectively. The asymmetry is mainly due to an uneven arrangement of the two Fab units with respect to the central stem (the Fc domain) and reflects in a different conformation of the individual units. As a result, the Fab elbow angle, which is a crucial determinant for antigen recognition and binding, was found to be larger (169°) in the more distant Fab unit than that in the less distant one (143°). The whole flexibility of the antibody has been found to strongly depend on the relative inter-domain orientations, with one of the Fab arms playing a major role. The average structure and the amount of flexibility has been studied in the presence of different buffers and additives, and monitored at increasing temperature, up to the complete unfolding of the antibody. Overall, the structural characterization of rituximab can help in designing next-generation anti-CD20 antibodies and finding more efficient routes for rituximab production at industrial level.

Resemblance-Ranking Peptide Library to Screen for Binders to Antibodies on a Peptidomic Scale

A novel resemblance-ranking peptide library with 160,000 10-meric peptides was designed to search for selective binders to antibodies. The resemblance-ranking principle enabled the selection of sequences that are most similar to the human peptidome. The library was synthesized with ultra-high-density peptide arrays. As proof of principle, screens for selective binders were performed for the therapeutic anti-CD20 antibody rituximab. Several features in the amino acid composition of antibody-binding peptides were identified. The selective affinity of rituximab increased with an increase in the number of hydrophobic amino acids in a peptide, mainly tryptophan and phenylalanine, while a total charge of the peptide remained relatively small. Peptides with a higher affinity exhibited a lower sum helix propensity. For the 30 strongest peptide binders, a substitutional analysis was performed to determine dissociation constants and the invariant amino acids for binding to rituximab. The strongest selective peptides had a dissociation constant in the hundreds of the nano-molar range. The substitutional analysis revealed a specific hydrophobic epitope for rituximab. To show that conformational binders can, in principle, be detected in array format, cyclic peptide substitutions that are similar to the target of rituximab were investigated. Since the specific binders selected via the resemblance-ranking peptide library were based on the hydrophobic interactions that are widespread in the world of biomolecules, the library can be used to screen for potential linear epitopes that may provide information about the cross-reactivity of antibodies.

Epitope Mapping of Rituximab Using HisMAP Method

CD20 is expressed in the B lymphocyte, and an effective target for the detection and treatment of B cell lymphomas. Therefore, CD20 has been studied as a therapeutic target of B cell lymphomas and autoimmune disorders. Specific anti-CD20 monoclonal antibodies (mAbs), such as rituximab, ofatumumab, veltuzumab, and ocaratuzumab, have been developed. Revealing the recognition mechanism of antigen by mAbs could contribute to understanding the function of mAbs and could be useful for the development of vaccine. Rituximab is a mouse-human chimeric anti-CD20 mAb, which was developed and approved for the treatment of the B cell malignancies. Hence, the binding epitope of rituximab for CD20 has been studied. Some reports show that ₁₇₀-ANPS-₁₇₃, especially Ala170 and Pro172 of CD20 are important for rituximab binding. However, only phage display results showed that ₁₈₂-YCYSI-₁₈₆ of CD20 is also important for rituximab binding to CD20. In this study, we tried to determine the binding epitope of rituximab for CD20 using histidine-tag insertion for epitope mapping (HisMAP) method. The results showed that two regions of CD20 (₁₆₉-PANPSE-₁₇₄ and ₁₈₃-CYSIQ-₁₈₇) are important for rituximab-binding for CD20.

Structural basis of an epitope tagging system derived from Haloarcula marismortui bacteriorhodopsin I D94N and its monoclonal antibody GD-26

Specific antibody interactions with short peptides have made epitope tagging systems a vital tool employed in virtually all fields of biological research. Here, we present a novel epitope tagging system comprised of a monoclonal antibody named GD‐26, which recognises the TD peptide (GTGATPADD) derived from Haloarcula marismortui bacteriorhodopsin I (HmBRI) D94N mutant. The crystal structure of the antigen‐binding fragment (Fab) of GD‐26 complexed with the TD peptide was determined to a resolution of 1.45 Å. The TD peptide was found to adopt a 3₁₀ helix conformation within the binding cleft, providing a characteristic peptide structure for recognition by GD‐26 Fab. Based on the structure information, polar and nonpolar forces collectively contribute to the strong binding. Attempts to engineer the TD peptide show that the proline residue is crucial for the formation of the 3₁₀ helix in order to fit into the binding cleft. Isothermal calorimetry (ITC) reported a dissociation constant K_D of 12 ± 2.8 nm, indicating a strong interaction between the TD peptide and GD‐26 Fab. High specificity of GD‐26 IgG to the TD peptide was demonstrated by western blotting, ELISA and immunofluorescence as only TD‐tagged proteins were detected, suggesting the effectiveness of the GD‐26/TD peptide tagging system. In addition to already‐existing epitope tags such as the FLAG tag and the ALFA tag adopting either extended or α‐helix conformations, the unique 3₁₀ helix conformation of the TD peptide together with the corresponding monoclonal antibody GD‐26 offers a novel tagging option for research.

Determination of the Rituximab Binding Site to the CD20 Epitope Using SPOT Synthesis and Surface Plasmon Resonance Analyses

Antibodies not only play a major role in clinical diagnostics and biopharmaceutical analysis but also are a class of drugs that are regularly used to treat numerous diseases. The identification of antibody-epitope binding sites is then of great interest to many emerging medical and bioanalytical applications, particularly to design monoclonal antibodies (mAb) mimics taking advantage of amino acid residues involved in the binding. Among relevant antibodies, the monoclonal antibody rituximab has received significant attention as it is exploited to treat several cancers including non-Hodgkin's lymphoma and chronic lymphocytic leukemia, as well as some autoimmune disorders such as rheumatoid arthritis. The binding of rituximab to the targeted cells occurs via the recognition of the CD20 epitope. A crystallographic study has shown that the binding area, named paratope, is located at the surface of rituximab. Combining the SPOT method and the complementary surface plasmon resonance technique allowed us to detect an extended recognition domain buried in the pocket of the rituximab Fab formed by four β-sheets. More generally, the present study offers a comprehensive approach to identify antibody-epitope binding sites.

Development, Validation, and Comparison of Two Mass Spectrometry Methods (LC-MS/HRMS and LC-MS/MS) for the Quantification of Rituximab in Human Plasma

Rituximab is a chimeric immunoglobulin G1-kappa (IgG1κ) antibody targeting the CD20 antigen on B-lymphocytes. Its applications are various, such as for the treatment of chronic lymphoid leukemia or non-Hodgkin’s lymphoma in oncology, and it can also be used in the treatment of certain autoimmune diseases. Several studies support the interest in therapeutic drug monitoring to optimize dosing regimens of rituximab. Thus, two different laboratories have developed accurate and reproductive methods to quantify rituximab in human plasma: one using liquid chromatography quadripolar tandem mass spectrometer (LC-MS/MS) and the other, liquid chromatography orbitrap tandem mass spectrometer (LC-MS/HRMS). For both assays, quantification was based on albumin depletion or IgG-immunocapture, surrogate peptide analysis, and full-length stable isotope-labeled rituximab. With LC-MS/MS, the concentration range was from 5 to 500 µg/mL, the within- and between-run precisions were <8.5%, and the limit of quantitation was 5 µg/mL. With LC-MS/HRMS, the concentration range was from 10 to 200 µg/mL, the within- and between-run accuracy were <11.5%, and the limit of quantitation was 2 µg/mL. Rituximab plasma concentrations from 63 patients treated for vasculitis were compared. Bland–Altman analysis and Passing–Bablok regression showed the interchangeability between these two methods. Overall, these methods were robust and reliable and could be applied to routine clinical samples.

The Roles of Sclerostin in Immune System and the Applications of Aptamers in Immune-Related Research

Wnt signaling is one of the fundamental pathways that play a major role in almost every aspect of biological systems. In addition to the well-known influence of Wnt signaling on bone formation, its essential role in the immune system also attracted increasing attention. Sclerostin, a confirmed Wnt antagonist, is also proven to modulate the development and differentiation of normal immune cells, particularly B cells. Aptamers, single-stranded (ss) oligonucleotides, are capable of specifically binding to a variety of target molecules by virtue of their unique three-dimensional structures. With in-depth study of those functional nucleic acids, they have been gradually applied to diagnostic and therapeutic area in immune diseases due to their various advantages over antibodies. In this review, we focus on several issues including the roles of Wnt signaling and Wnt antagonist sclerostin in the immune system. For the sake of understanding, current examples of aptamers applications for the immune diseases are also discussed. At the end of this review, we propose our ideas for the future research directions.

Incorporation of Halogenated Amino Acids into Antibody Fragments at Multiple Specific Sites Enhances Antigen Binding

Expansion of the amino-acid repertoire with synthetic derivatives introduces novel structures and functionalities into proteins. In this study, we improved the antigen binding of antibodies by incorporating halogenated tyrosines at multiple selective sites. Tyrosines in the Fab fragment of an anti-EGF-receptor antibody 059-152 were systematically replaced with 3-bromo- and 3-chlorotyrosines, and simultaneous replacements at four specific sites were found to cause a tenfold increase in the affinity toward the antigen. Structure modeling suggested that this effect was due to enhanced shape complementarity between the antigen and antibody molecules. On the other hand, we showed that chlorination in the constant domain, far from the binding interface, of Rituximab Fab also increased the affinity significantly (up to 17-fold). Our results showed that antigen binding is tunable with the halogenation in and out of the binding motifs.

Binding mechanisms of therapeutic antibodies to human CD20

Monoclonal antibodies (mAbs) targeting human antigen CD20 (cluster of differentiation 20) constitute important immunotherapies for the treatment of B cell malignancies and autoimmune diseases. Type I and II therapeutic mAbs differ in B cell binding properties and cytotoxic effects, reflecting differential interaction mechanisms with CD20. Here we present 3.7- to 4.7-angstrom cryo–electron microscopy structures of full-length CD20 in complexes with prototypical type I rituximab and ofatumumab and type II obinutuzumab. The structures and binding thermodynamics demonstrate that upon binding to CD20, type II mAbs form terminal complexes that preclude recruitment of additional mAbs and complement components, whereas type I complexes act as molecular seeds to increase mAb local concentration for efficient complement activation. Among type I mAbs, ofatumumab complexes display optimal geometry for complement recruitment. The uncovered mechanisms should aid rational design of next-generation immunotherapies targeting CD20.

Structure of CD20 in complex with the therapeutic monoclonal antibody rituximab

Cluster of differentiation 20 (CD20) is a B cell membrane protein that is targeted by monoclonal antibodies for the treatment of malignancies and autoimmune disorders but whose structure and function are unknown. Rituximab (RTX) has been in clinical use for two decades, but how it activates complement to kill B cells remains poorly understood. We obtained a structure of CD20 in complex with RTX, revealing CD20 as a compact double-barrel dimer bound by two RTX antigen-binding fragments (Fabs), each of which engages a composite epitope and an extensive homotypic Fab:Fab interface. Our data suggest that RTX cross-links CD20 into circular assemblies and lead to a structural model for complement recruitment. Our results further highlight the potential relevance of homotypic Fab:Fab interactions in targeting oligomeric cell-surface markers.

Development of Traceable Rituximab-Modified PEO-Polyester Micelles by Postinsertion of PEG-phospholipids for Targeting of B-cell Lymphoma

The objective of this work was to develop rituximab (RTX)-modified polymeric micelles for targeting of B-cell lymphoma cells, through postinsertion of RTX-poly(ethylene glycol)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (RTX-PEG-DSPE) into methoxy poly(ethylene oxide)-poly(ε-caprolactone) (PEO-PCL) or methoxy poly(ethylene oxide)-poly(ε-benzylcarboxylate-ε-caprolactone) (PEO-PBCL) micelles. Mixed micelles were made traceable by introducing Cy5.5 to RTX and conjugating Cy3 to propargyl moiety, end-capped PCL or PBCL. Successful adaptation of the postinsertion method for the formation of immunomicelles was evidenced by measurement of RTX levels on the micellar surface, purified from free RTX by size exclusion chromatography, using microBSA assay. A change in the micellar diameter, from 50-70 nm for PEO-PCL and PEO-PBCL micelles and 20 nm for PEG-DSPE micelles, to 80-95 nm for the mixed micellar population as well as the critical micellar concentration of mixed micelles provided further proof for the success of the postinsertion method applied here. Mixed micelles containing PCL or PBCL with a degree of polymerization of 22 (PCL₂₂ and PBCL₂₂) were thermodynamically and kinetically more stable than those with PCL₁₅. Accordingly, RTX micelles containing PCL₂₂ or PBCL₂₂ showed a higher percentage of Cy³⁺/Cy^5.5+ cell population in CD20⁺ KG-15 cells, than those with PCL₁₅. The percentage of Cy³⁺/Cy^5.5+ cell population drastically reduced in the presence of competing RTX for micelles containing PCL₂₂ or PBCL₂₂ cores, indicating the superiority of these structures for active targeting of CD20⁺ cells. No significant difference in the cytotoxicity of paclitaxel in RTX-micelles versus plain ones was observed, reflecting the noninternalizing function of CD20. The results show that traceable mixed micelles prepared through postinsertion of RTX-PEG-DSPE to PEO-PCL₂₂ or PEO-PBCL₂₂ micelles can be used for targeting and/or imaging of CD20⁺ B cell lymphoma cells. The postinsertion method can be adopted to prepare other PEO-poly(ester)-based immunomicelles for active targeting of other diseased cells.

Biochemical and biophysical characterization of purified native CD20 alone and in complex with rituximab and obinutuzumab

CD20 is a B-lymphocyte specific integral membrane protein, an activated-glycosylated phosphoprotein expressed on the surface of B-cells and a clinically validated target of monoclonal antibodies such as rituximab, ocrelizumab, ofatumumab and obinutuzumab in the treatment of all B cell lymphomas and leukemias as well as autoimmune diseases. Here, we report the extraction and purification of native CD20 from SUDHL4 and RAMOS cell lines. To improve the protein yield, we applied a calixarene-based detergent approach to solubilize, stabilize and purify native CD20 from HEK293 cells. Size Exclusion Chromatography (SEC) and Analytical Ultracentrifugation show that purified CD20 was non-aggregated and that CD20 oligomerization is concentration dependent. Negative stain electron microscopy and atomic force microscopy revealed homogenous populations of CD20. However, no defined structure could be observed. Interestingly, micellar solubilized and purified CD20 particles adopt uniformly confined nanodroplets which do not fuse and aggregate. Finally, purified CD20 could bind to rituximab and obinutuzumab as demonstrated by SEC, and Surface Plasmon Resonance (SPR). Specificity of binding was confirmed using CD20 antibody mutants to human B-cell lymphoma cells. The strategy described in this work will help investigate CD20 binding with newly developed antibodies and eventually help to optimize them. This approach may also be applicable to other challenging membrane proteins.

Antibody-Drug Conjugate that Exhibits Synergistic Cytotoxicity with an Endosome-Disruptive Peptide

Antibody-drug conjugates are an important class of cancer therapeutics. These agents generally bind a specific cell surface receptor, undergo receptor-mediated endocytosis, and enter the endosomal-lysosomal system, where the environment in these organelles facilitates the release of a membrane-permeable cytotoxin. By using a membrane-impermeable cytotoxin, we describe here a method that allows the cytotoxicity of an antibody conjugate to be triggered by co-administration with an endosome-disruptive peptide that exhibits low toxicity. This approach was validated by conjugation of an anionic derivative of the tubulin-binding cytotoxin colchinol methyl ether to lysine residues of the HER2-targeting antibody trastuzumab (Herceptin) via a disulfide. When this antibody binds HER2 on SKBR3 breast cancer cells and undergoes endocytosis, the membrane-impermeable cytotoxin is released, but it becomes trapped in endosomes, resulting in relatively low cytotoxicity (IC50 > 1 μM). However, co-administration with an essentially nontoxic (IC50 > 10 μM) cholesterol-linked endosome-disruptive peptide promotes the release of this small molecule into the cytoplasm, conferring subnanomolar cytotoxic potency (IC50 = 0.11 ± 0.07 nM). Studies of a structurally related fluorophore conjugate revealed that the endosome-disruptive peptide does not substantially enhance cleavage of the disulfide (t 1/2 = 8 ± 2 h) within endosomes, suggesting that the mechanism of endosomal escape involves the efflux of some small molecules without facilitating substantial influx of reduced glutathione.

Immunosuppressive therapy with rituximab in common variable immunodeficiency

Common variable immunodeficiency (CVID) is the most frequent symptomatic primary antibody deficiency in adulthood and is characterized by the marked reduction of IgG and IgA serum levels. Thanks to the successful use of polyvalent immunoglobulin replacement therapy to treat and prevent recurrent infections, non-infectious complications, including autoimmunity, polyclonal lymphoproliferation and malignancies, have progressively become the major cause of morbidity and mortality in CVID patients. The management of these complications is particularly challenging, often requiring multiple lines of immunosuppressive treatments. Over the last 5–10 years, the anti-CD20 monoclonal antibody (i.e., rituximab) has been increasingly used for the treatment of both autoimmune and non-malignant lymphoproliferative manifestations associated with CVID. This review illustrates the evidence on the use of rituximab in CVID. For this purpose, first we discuss the mechanisms proposed for the rituximab mediated B-cell depletion; then, we analyze the literature data regarding the CVID-related complications for which rituximab has been used, focusing on autoimmune cytopenias, granulomatous lymphocytic interstitial lung disease (GLILD) and non-malignant lymphoproliferative syndromes. The cumulative data suggest that in the vast majority of the studies, rituximab has proven to be an effective and relatively safe therapeutic option. However, there are currently no data on the long-term efficacy and side effects of rituximab and other second-line therapeutic options. Further randomized controlled trials are needed to optimize the management strategies of non-infectious complications of CVID.

Covalent labeling and mass spectrometry reveal subtle higher order structural changes for antibody therapeutics

Monoclonal antibodies are among the fastest growing therapeutics in the pharmaceutical industry. Detecting higher-order structure changes of antibodies upon storage or mishandling, however, is a challenging problem. In this study, we describe the use of diethylpyrocarbonate (DEPC)-based covalent labeling (CL) - mass spectrometry (MS) to detect conformational changes caused by heat stress, using rituximab as a model system. The structural resolution obtained from DEPC CL-MS is high enough to probe subtle conformation changes that are not detectable by common biophysical techniques. Results demonstrate that DEPC CL-MS can detect and identify sites of conformational changes at the temperatures below the antibody melting temperature (e.g., 55 ᴼC). The observed labeling changes at lower temperatures are validated by activity assays that indicate changes in the Fab region. At higher temperatures (e.g., 65 ᴼC), conformational changes and aggregation sites are identified from changes in CL levels, and these results are confirmed by complementary biophysical and activity measurements. Given the sensitivity and simplicity of DEPC CL-MS, this method should be amenable to the structural investigations of other antibody therapeutics.

The applications of anti-CD20 antibodies to treat various B cells disorders

B-lymphocyte antigen CD20 (called CD20) is known as an activated-glycosylated phosphoprotein which is expressed on the surface of all B-cells. CD20 is involved in the regulation of trans-membrane Ca²⁺ conductance and also play critical roles in cell-cycle progression during human B cell proliferation and activation. The appearance of monoclonal antibody (mAb) technology provided an effective field for targeted therapy in treatment of a variety of diseases such as cancer, and autoimmune diseases. Anti-CD20 is one of important antibodies which could be employed in treatment of several diseases. Increasing evidences revealed that efficacy of different anti-CD20 antibodies is implicated by their function. Hence, evaluation of anti-CD20 antibodies function could provide and introduce new anti-CD20 based therapies. In the present study, we summarized several applications of anti-CD20 antibodies in various immune related disorders including B-CLL (B-cell chronic lymphocytic leukemia), rheumatoid arthritis (RA), multiple sclerosis (MS) and melanoma.

Past, Present, and Future of Rituximab-The World's First Oncology Monoclonal Antibody Therapy

Rituximab is a chimeric mouse/human monoclonal antibody (mAb) therapy with binding specificity to CD20. It was the first therapeutic antibody approved for oncology patients and was the top-selling oncology drug for nearly a decade with sales reaching $8.58 billion in 2016. Since its initial approval in 1997, it has improved outcomes in all B-cell malignancies, including diffuse large B-cell lymphoma, follicular lymphoma, and chronic lymphocytic leukemia. Despite widespread use, most mechanistic data have been gathered from in vitro studies while the roles of the various response mechanisms in humans are still largely undetermined. Polymorphisms in Fc gamma receptor and complement protein genes have been implicated as potential predictors of differential response to rituximab, but have not yet shown sufficient influence to impact clinical decisions. Unlike most targeted therapies developed today, no known biomarkers to indicate target engagement/tumor response have been identified, aside from reduced tumor burden. The lack of companion biomarkers beyond CD20 itself has made it difficult to predict which patients will respond to any given anti-CD20 antibody. In the past decade, two new anti-CD20 antibodies have been approved: ofatumumab, which binds a distinct epitope of CD20, and obinutuzumab, a mAb derived from rituximab with modifications to the Fc portion and to its glycosylation. Both are fully humanized and have biological activity that is distinct from that of rituximab. In addition to these new anti-CD20 antibodies, another imminent change in targeted lymphoma treatment is the multitude of biosimilars that are becoming available as rituximab's patent expires. While the widespread use of rituximab itself will likely continue, its biosimilars will increase global access to the therapy. This review discusses current research into mechanisms and potential biomarkers of rituximab response, as well as its biosimilars and the newer CD20 binding mAb therapies. Increased ability to assess the effectiveness of rituximab in an individual patient, along with the availability of alternative anti-CD20 antibodies will likely lead to dramatic changes in how we use CD20 antibodies going forward.

Selection and Characterization of Single-Stranded DNA Aptamers Binding Human B-Cell Surface Protein CD20 by Cell-SELEX

The B-lymphocyte antigen (CD20) is a suitable target for single-stranded (ss) nucleic acid oligomer (aptamers). The aim of study was selection and characterization of a ssDNA aptamer against CD20 using Cell-Systematic Evolution of Ligands by Exponential Enrichment (Cell-SELEX). The cDNA clone of CD20 (pcDNA-CD20) was transfected to human embryonic kidney (HEK293T) cells. Ten rounds of Cell-SELEX was performed on recombinant HEK-CD20 cells. The final eluted ssDNA pool was amplified and ligated in T/A vector for cloning. The plasmids of positive clones were extracted, sequenced and the secondary structures of the aptamers predicted using DNAMAN^® software. The sequencing results revealed 10 different types; three of them had the highest thermodynamic stability, named AP-1, AP-2 and AP-3. The AP-1 aptamer was the most thermodynamically stable one (ΔGAP-1 = −10.87 kcal/mol) with the highest binding affinity to CD20 (96.91 ± 4.5 nM). Since, the CD20 is a suitable target for recognition of B-Cell. The selected aptamers could be comparable to antibodies with many advantages. The AP-1, AP-2 and AP-3 could be candidate instead of antibodies for diagnostic and therapeutic applications in immune deficiency, autoimmune diseases, leukemia and lymphoma.

New insights in Type I and II CD20 antibody mechanisms-of-action with a panel of novel CD20 antibodies

Based on their mechanisms-of-action, CD20 monoclonal antibodies (mAbs) are grouped into Type I [complement-dependent cytotoxicity (CDC) and antibody-dependent cell-mediated cytotoxicity (ADCC)] and Type II [programmed cell death (PCD) and ADCC] mAbs. We generated 17 new hybridomas producing CD20 mAbs of different isotypes and determined unique heavy and light chain sequence pairs for 13 of them. We studied their epitope binding, binding kinetics and structural properties and investigated their predictive value for effector functions, i.e. PCD, CDC and ADCC. Peptide mapping and CD20 mutant screens revealed that 10 out of these 11 new mAbs have an overlapping epitope with the prototypic Type I mAb rituximab, albeit that distinct amino acids of the CD20 molecule contributed differently. Binding kinetics did not correlate with the striking differences in CDC activity among the mIgG2c mAbs. Interestingly, chimerization of mAb m1 resulted in a mAb displaying both Type I and II characteristics. PCD induction was lost upon introduction of a mutation in the framework of the heavy chain affecting the elbow angle, supporting that structural changes within this region can affect functional activities of CD20 mAbs. Together, these new CD20 mAbs provide further insights in the properties dictating the functional efficacy of CD20 mAbs.

Progress and Challenges in the Design and Clinical Development of Antibodies for Cancer Therapy

The remarkable progress in engineering and clinical development of therapeutic antibodies in the last 40 years, after the seminal work by Köhler and Milstein, has led to the approval by the United States Food and Drug Administration (FDA) of 21 antibodies for cancer immunotherapy. We review here these approved antibodies, with emphasis on the methods used for their discovery, engineering, and optimization for therapeutic settings. These methods include antibody engineering via chimerization and humanization of non-human antibodies, as well as selection and further optimization of fully human antibodies isolated from human antibody phage-displayed libraries and immunization of transgenic mice capable of generating human antibodies. These technology platforms have progressively led to the development of therapeutic antibodies with higher human content and, thus, less immunogenicity. We also discuss the genetic engineering approaches that have allowed isotype switching and Fc modifications to modulate effector functions and bioavailability (half-life), which together with the technologies for engineering the Fv fragment, have been pivotal in generating more efficacious and better tolerated therapeutic antibodies to treat cancer.

Assessment of structural and functional similarity of biosimilar products: Rituximab as a case study

Biosimilars are products that are similar in terms of quality, safety, and efficacy to an already licensed reference/ innovator product and are expected to offer improved affordability. The most significant source of reduction in the cost of development of a biosimilar is the reduced clinical examination that it is expected to undergo as compared to the innovator product. However, this clinical relief is predicated on the assumption that there is analytical similarity between the biosimilar and the innovator product. As a result, establishing analytical similarity is arguably the most important step towards successful development of a biosimilar. Here, we present results from an analytical similarity exercise that was performed with five biosimilars of rituximab (Ristova®, Roche), a chimeric mouse/ human monoclonal antibody biotherapeutic, that are available on the Indian market. The results show that, while the biosimilars exhibited similarity with respect to protein structure and function, there were significant differences with respect to size heterogeneity, charge heterogeneity and glycosylation pattern.

Identification of a peptide-peptide binding motif in the coating of nab-paclitaxel nanoparticles with clinical antibodies: bevacizumab, rituximab, and trastuzumab

Antibody directed chemotherapy (ADC) takes advantage of the selectivity of the monoclonal antibody to increase the efficacy of the chemotherapeutic agent, while reducing toxicity. Previously we described three nab-paclitaxel (Abraxane) nanoparticles coated with commercial monoclonal antibodies. Identifying the binding sites responsible for these particles could allow reverse engineering of nab-paclitaxel binding antibodies, creating a modular platform for antibody directed chemotherapeutic nanoparticles. Herein, Biacore surface plasmon resonance is used to identify an antibody binding site, HSA Peptide 40, on human serum albumin with nanomolar affinity for all three monoclonal antibodies. This 18-mer peptide, which lies in Subdomain IIIA of human serum albumin, blocks binding of all three antibodies to nab-paclitaxel when added in excess. We furthermore show the complementary binding region on all three monoclonal antibodies to be the CDR H3 loop of the Fab region, and show that they all have nano to micromolar affinity for HSA Peptide 40 and nab-paclitaxel nanoparticles. The presented data identify the nature of the critical protein-protein interaction that enables antibody coating of nab-paclitaxel.

Ocrelizumab: a B-cell depleting therapy for multiple sclerosis

INTRODUCTION

Multiple sclerosis (MS) is the most common neurological disease responsible for early disability in the young working population. In the last two decades, based on retrospective/prospective data, the use of disease-modifying therapies has been shown to slow the rate of disability progression and prolonged the time to conversion into secondary-progressive MS (SPMS). However, despite the availability of several approved therapies, disability progression cannot be halted significantly in all MS patients. Areas covered: This article reviews the immunopathology of the B-cells, and their role in pathogenesis of MS and their attractiveness as a potential therapeutic target in MS. The review focuses on the recently published ocrelizumab phase III trials in terms of its efficacy, safety, and tolerability as well as its future considerations. Expert opinion: B lymphocyte cell depletion therapy offers a compelling and promising new option for MS patients. Nonetheless, there is a need for heightened vigilance and awareness in detecting potential long-term consequences that currently remain unknown.

Advantages of targeting B cell receptor complex to treat B-cell derived autoimmune diseases and lymphomas

Antibodies produced by B-cells provide protection from infectious agents. However, impaired cell death signaling pathways in B-cells can lead to cancer, immunodeficiency or autoimmune diseases. B-cell signaling molecules such as CD20, CD19, Btk, and BAFF-R are targeted by therapeutic drugs and used to treat B-cell derived lymphomas or autoimmune diseases. Nevertheless, B-cells could develop resistance to these therapeutic drugs or the therapeutic drugs may have off-target effects. For instance, repeated rituximab (anti-CD20 antibody) treatment may lead to the loss of its target cell surface molecule, CD20. In addition, in B-cell malignancies, loss of CD19 expression has been observed. Another target molecule, Btk is expressed not only in B-cells but also in mast cells, macrophages, and dendritic cells. Thus, targeting Btk could negatively regulate the functions of innate immunity. The expression of BAFF-R is thought to be restricted to B-cells but it is also expressed on T-cells. Targeting BAFF-R, therefore, may lead to depletion of T-cells in addition to B-cells. B cell receptor (BCR) expression and signaling, however, are critically important for development, differentiation and survival of B-cells. Moreover, BCR is exclusively expressed on B-cells, which makes it an excellent target to avoid off-target effects.

Robust memory responses against influenza vaccination in pemphigus patients previously treated with rituximab

Rituximab is a therapeutic anti-CD20 monoclonal antibody widely used to treat B cell lymphoma and autoimmune diseases, such as rheumatic arthritis, systemic lupus erythematosus, and autoimmune blistering skin diseases (AIBD). While rituximab fully depletes peripheral blood B cells, it remains unclear whether some preexisting B cell memory to pathogens or vaccines may survive depletion, especially in lymphoid tissues, and if these memory B cells can undergo homeostatic expansion during recovery from depletion. The limited data available on vaccine efficacy in this setting have been derived from rituximab-treated patients receiving concomitant chemotherapy or other potent immunosuppressants. Here, we present an in-depth analysis of seasonal influenza vaccine responses in AIBD patients previously treated with rituximab, who generally did not receive additional therapeutic interventions. We found that, despite a lack of influenza-specific memory B cells in the blood, patients mount robust recall responses to vaccination, comparable to healthy controls, both at a cellular and a serological level. Repertoire analyses of plasmablast responses suggest that they likely derive from a diverse pool of tissue-resident memory cells, refractory to depletion. Overall, these data have important implications for establishing an effective vaccine schedule for AIBD patients and the clinical care of rituximab-treated patients in general and contribute to our basic understanding of maintenance of normal and pathogenic human B cell memory.

Timing determines dexamethasone and rituximab induced synergistic cell death

Dysregulation of cell death signaling pathways in many cell types such as B lymphocytes (B-cells) can lead to cancer, for example to B-cell lymphomas. Rituximab (RTX) and glucocorticoids such as dexamethasone (Dex) are widely used to treat hematological malignancies including B-cell lymphomas. Although the combination of Dex and RTX improves the treatment outcome of lymphoma patients, most lymphomas remain incurable diseases. Therefore, a detailed investigation of Dex- and RTX-induced signaling might provide new insights into the therapeutic benefits of these drugs. In this paper, we describe Dex- and RTX-induced signaling pathways and their downstream target proteins/cells. In addition, we also overview how the signaling initiated by Dex and RTX modulate the outcome of Dex- and RTX-mediated cell death in lymphoma cells. The combination of Dex and RTX results in massive cell death in lymphoma cells. However, pretreatment of lymphoma cells or mononuclear cytotoxic cells with Dex followed by RTX leads to a decrease in apoptosis or it impairs antibody-dependent cellular cytotoxicity (ADCC). RTX-mediated ADCC is impaired by Dex-induced depletion of cytotoxic cells, whereas RTX-mediated short-term ERK1/2 activation decreases Dex-induced apoptosis. Therefore, the timing of the combination of Dex and RTX is a determining factor for the synergistic effect of these cell death inducing agents.

The Development of a Recombinant scFv Monoclonal Antibody Targeting Canine CD20 for Use in Comparative Medicine

Monoclonal antibodies are leading agents for therapeutic treatment of human diseases, but are limited in use by the paucity of clinically relevant models for validation. Sporadic canine tumours mimic the features of some human equivalents. Developing canine immunotherapeutics can be an approach for modeling human disease responses. Rituximab is a pioneering agent used to treat human hematological malignancies. Biologic mimics that target canine CD20 are just being developed by the biotechnology industry. Towards a comparative canine-human model system, we have developed a novel anti-CD20 monoclonal antibody (NCD1.2) that binds both human and canine CD20. NCD1.2 has a sub-nanomolar K_d as defined by an octet red binding assay. Using FACS, NCD1.2 binds to clinically derived canine cells including B-cells in peripheral blood and in different histotypes of B-cell lymphoma. Immunohistochemical staining of canine tissues indicates that the NCD1.2 binds to membrane localized cells in Diffuse Large B-cell lymphoma, Marginal Zone Lymphoma, and other canine B-cell lymphomas. We cloned the heavy and light chains of NCD1.2 from hybridomas to determine whether active scaffolds can be acquired as future biologics tools. The V_H and V_L genes from the hybridomas were cloned using degenerate primers and packaged as single chains (scFv) into a phage-display library. Surprisingly, we identified two scFv (scFv-3 and scFv-7) isolated from the hybridoma with bioactivity towards CD20. The two scFv had identical V_H genes but different V_L genes and identical CDR3s, indicating that at least two light chain mRNAs are encoded by NCD1.2 hybridoma cells. Both scFv-3 and scFv-7 were cloned into mammalian vectors for secretion in CHO cells and the antibodies were bioactive towards recombinant CD20 protein or peptide. The scFv-3 and scFv-7 were cloned into an ADEPT-CPG2 bioconjugate vector where bioactivity was retained when expressed in bacterial systems. These data identify a recombinant anti-CD20 scFv that might form a useful tool for evaluation in bioconjugate-directed anti-CD20 immunotherapies in comparative medicine.