Influence of the contact angle of silica nanoparticles at the air–water interface on the mechanical properties of the layers composed of these particles

Design and Fabrication of Electrospun PLA-Based Silica-Modified Composite Nanofibers with Antibacterial Properties for Perspective Wound Treatment

The aim of this study was to develop a novel amikacin (AMI) delivery system with prolonged release based on composite electrospun nanofibers of PLA supplemented with AMI-loaded Si nanoparticles of different morphology. The resultant materials were characterized in terms of their physical properties (scanning electron microscopy, Brunauer-Emmett-Teller analysis, thermogravimetric analysis, water contact angle). High-Performance Liquid Chromatography was used to determine the AMI content in the liquid fractions obtained from the release study. The results show that nanofibers of fumed silica exhibited an aggregated, highly porous structure, whereas nanofibers of mesoporous silica had a spherical morphology. Both silica nanoparticles had a significant effect on the hydrophilic properties of PLA nanofiber surfaces. The liquid fractions were investigated to gauge the encapsulation efficiency (EE) and loading efficiency (LE) of AMI, demonstrating 66% EE and 52% LE for nanofibers of fumed silica compared to nanofibers of mesoporous silica nanoparticles (52% EE and 12.7% LE). The antibacterial activity of the AMI-loaded nanofibers was determined by the Kirby-Bauer Method. These results demonstrated that the PLA-based silica nanofibers effectively enhanced the antibacterial properties against the Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae.

Particle Size and Rheology of Silica Particle Networks at the Air-Water Interface

Silica nanoparticles find utility in different roles within the commercial domain. They are either employed in bulk within pharmaceutical formulations or at interfaces in anti-coalescing agents. Thus, studying the particle attributes contributing to the characteristics of silica particle-laden interfaces is of interest. The present work highlights the impact of particle size (i.e., 250 nm vs. 1000 nm) on the rheological properties of interfacial networks formed by hydrophobically modified silica nanoparticles at the air-water interface. The particle surface properties were examined using mobility measurements, Langmuir trough studies, and interfacial rheology techniques. Optical microscopy imaging along with Langmuir trough studies revealed the microstructure associated with various surface pressures and corresponding surface coverages (ϕ). The 1000 nm silica particle networks gave rise to a higher surface pressure at the same coverage compared to 250 nm particles on account of the stronger attractive capillary interactions. Interfacial rheological characterization revealed that networks with 1000 nm particles possess higher surface modulus and yield stress in comparison to the network obtained with 250 nm particles at the same surface pressure. These findings highlight the effect of particle size on the rheological characteristics of particle-laden interfaces, which is of importance in determining the stability and flow response of formulations comprising particle-stabilized emulsions and foams.

Stimuli-Responsive Langmuir Films Composed of Nanoparticles Decorated with Poly(N-isopropyl acrylamide) (PNIPAM) at the Air/Water Interface

The nanotechnology shift from static toward stimuli-responsive systems is gaining momentum. We study adaptive and responsive Langmuir films at the air/water interface to facilitate the creation of two-dimensional (2D) complex systems. We verify the possibility of controlling the assembly of relatively large entities, i.e., nanoparticles with diameter around 90 nm, by inducing conformational changes within an about 5 nm poly(N-isopropyl acrylamide) (PNIPAM) capping layer. The system performs reversible switching between uniform and nonuniform states. The densely packed and uniform state is observed at a higher temperature, i.e., opposite to most phase transitions, where more ordered phases appear at lower temperatures. The induced nanoparticles' conformational changes result in different properties of the interfacial monolayer, including various types of aggregation. The analysis of surface pressure at different temperatures and upon temperature changes, surface potential measurements, surface rheology experiments, Brewster angle microscopy (BAM), and scanning electron microscopy (SEM) observations are accompanied by calculations to discuss the principles of the nanoparticles' self-assembly. Those findings provide guidelines for designing other adaptive 2D systems, such as programable membranes or optical interfacial devices.

Quantification of polystyrene microsphere attachment probability at the oil‒water interface using a microfluidic platform

This study investigates the effects of interparticle interactions and wettability on the particle attachment efficacy to the oil‒water interface. Three types of PS particles with different surface functional groups were examined at varying salt concentrations and the number of particles injected into the interface. Based on the microfluidic method and the surface coverage measurement, we found that the two contributing factors significantly influenced particle attachment efficiency to the interface, while the wettability factor has a major contribution. This research contributes to the understanding of physicochemical aspects of particle assembly at fluid interfaces and can offer strategies for forming tailored structures with desired interfacial properties.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Preparation of hollow-fiber nanofiltration membranes of high performance for effective removal of PFOA and high resistance to BSA fouling

Nanofiltration (NF) process has become one of the most promising technologies to remove micro-organic combined water pollution. Developing a NF membrane material with efficient separation for perfluorooctanoic acid (PFOA) combined pollution is highly desired, this manuscript targets this unmet need specifically. In this work, hydrophilic SiO₂ nanoparticles with various contents blended with carboxylic multiwalled carbon nanotube were used to modify poly (m-phenylene isophthal amide) (SiO₂/CMWCNT/PMIA) hollow fiber NF membrane. The modified membrane with 0.1 wt% SiO₂ doping exhibits way better fouling resistance with irreversible fouling ratio decreased dramatically from 18.7% to 2.3%, and the recovery rate of water flux increases significantly from 81.2% to 97.7%. The separation experiment results had confirmed that the modified membrane could improve the rejection from 97.2% to 98.6% for perfluorooctanoic acid (PFOA) and its combined pollution with bovine serum albumin (BSA). It is clear that this reported SiO₂/CMWCNT/PMIA hollow fiber NF membrane potentially could be applied in water treatment. This research also provides a theoretical basis for efficiently removal of PFOA and its combined pollution by NF membrane.

Interfacial colloidal assembly guided by optical tweezers and tuned via surface charge

HYPOTHESIS

The size, shape and dynamics of assemblies of colloidal particles optically-trapped at an air-water interface can be tuned by controlling the optical potential, particle concentration, surface charge density and wettability of the particles and the surface tension of the solution.

EXPERIMENTS

The assembly dynamics of different colloidal particle types (silica, polystyrene and carboxyl coated polystyrene particles) at an air-water interface in an optical potential were systematically explored allowing the effect of surface charge on assembly dynamics to be investigated. Additionally, the pH of the solutions were varied in order to modulate surface charge in a controllable fashion. The effect of surface tension on these assemblies was also explored by reducing the surface tension of the supporting solution by mixing ethanol with water.

FINDINGS

Silica, polystyrene and carboxyl coated polystyrene particles showed distinct assembly behaviours at the air-water interface that could be rationalised taking into account changes in surface charge (which in addition to being different between the particles could be modified systematically by changing the solution pH). Additionally, this is the first report showing that wettability of the colloidal particles and the surface tension of the solution are critical in determining the resulting assembly at the solution surface.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Study on the Liquid-Liquid and Liquid-Solid Interfacial Behavior of Functionalized Graphene Oxide

With the rise of carbon neutrality, the applications of carbon-based materials are gaining considerable attention. Graphene oxide (GO) is a two-dimensional sheet with epoxy and hydroxyl groups on the basal plane and carboxyl groups at the edge. In order to change the oil/water (o/w) interfacial activity, GO was controlled and modified by dodecylamine to get two kinds of functionalized GOs (fGOs), named as basal plane-functionalized GO (bGO) and edge-functionalized GO (eGO), respectively. The interfacial tension measurement showed that fGOs could reduce more interfacial tension at the poly-α-olefin/water interface than those at synthetic esters or aromatic compounds/water interfaces. Besides, eGO can reduce more poly-α-olefin-4/water interfacial tension compared to bGO. The interfacial dilatational rheology of eGO and fatty alcohol polyoxyethylene ether-4 (MOA4) showed that MOA4 gradually replaced eGO at the interface with the increase of MOA4, until the interface was completely occupied. eGO and MOA4 complex emulsion exhibited the best friction-reducing performance at 250 rpm. The coefficient of friction (COF) curves of the emulsions with eGO showed two platforms, with the COF reduced by 37.42% at the most. The rheological results of emulsions showed that the addition of eGO increased the elasticity of the emulsion. Emulsions showed shear-thinning and friction-thickening properties, which make it easier for the emulsion to form a lubricating film on the metal surface. Our research results suggested that the functionalization on the edge of GO will change the interfacial properties significantly, which have widespread applications in the encapsulation of active materials, surface protection, adsorption, and separation of pollutants.

Particle-laden fluid/fluid interfaces: physico-chemical foundations

Particle-laden fluid/fluid interfaces are ubiquitous in academia and industry, which has fostered extensive research efforts trying to disentangle the physico-chemical bases underlying the trapping of particles to fluid/fluid interfaces as well as the properties of the obtained layers. The understanding of such aspects is essential for exploiting the ability of particles on the stabilization of fluid/fluid interface for the fabrication of novel interface-dominated devices, ranging from traditional Pickering emulsions to more advanced reconfigurable devices. This review tries to provide a general perspective of the physico-chemical aspects associated with the stabilization of interfaces by colloidal particles, mainly chemical isotropic spherical colloids. Furthermore, some aspects related to the exploitation of particle-laden fluid/fluid interfaces on the stabilization of emulsions and foams will be also highlighted. It is expected that this review can be used for researchers and technologist as an initial approach to the study of particle-laden fluid layers.

Tuning Surface Chemistry and Ionic Strength to Control Nanoparticle Adsorption and Elastic Dilational Modulus at Air-Brine Interface

The relationship between the interfacial rheology of nanoparticle (NP) laden air-brine interfaces and NP adsorption and interparticle interactions is not well understood, particularly as a function of the surface chemistry and salinity. Herein, a nonionic ether diol on the surface of silica NPs provides steric stabilization in bulk brine and at the air-brine interface, whereas a second smaller underlying hydrophobic ligand raises the hydrophobicity to promote NP adsorption. The level of NPs adsorption at steady state is sufficient to produce an interface with a relatively strong elastic dilational modulus E' = dγ/d ln A. However, the interface is ductile with a relatively slow change in E' as the interfacial area is varied over a wide range during compression and expansion. In contrast, for silica NPs stabilized with only a single hydrophobic ligand, the interfaces are often more fragile and may fracture with small changes in area. The presence of concentrated divalent cations improves E' and ductility by screening electrostatic dipolar repulsion and strengthening the attractive forces between nanoparticles. The ability to tune the interfacial rheology with NP surface chemistry is of great interest for designing more stable gas/brine foams.

Tuning Nanoparticle Surface Chemistry and Interfacial Properties for Highly Stable Nitrogen-In-Brine Foams

The design of surface chemistries on nanoparticles (NPs) to stabilize gas/brine foams with concentrated electrolytes, especially with divalent ions, has been elusive. Herein, we tune the surface of 20 nm silica NPs by grafting a hydrophilic and a hydrophobic ligand to achieve two seemingly contradictory goals of colloidal stability in brine and high NP adsorption to yield a viscoelastic gas-brine interface. Highly stable nitrogen/water (N₂/brine) foams are formed with CaCl₂ concentrations up to 2% from 25 to 90 °C. The viscoelastic gas-brine interface retards drainage of the lamellae, and the high dilational elasticity arrests coarsening (Ostwald ripening) with no observable change in foam bubble size over 48 h. The ability to design NP-laden viscoelastic interfaces for highly stable foams, even with high divalent ion concentrations, is of fundamental mechanistic interest for a broad range of foam applications and in particular foams for CO₂ sequestration and enhanced oil recovery.

Motion of Particles in a Monolayer Induced by Coalescing of a Bubble with a Planar Air-Water Interface

The motion of particles in a monolayer induced by the coalescing of a bare bubble with a planar air-water interface was investigated in a modified Langmuir trough. Experiments were performed to understand the effect of particle hydrophobicity, subphase pH, packing density, the presence of a weak surfactant, and particle size distribution on the behavior of particle movement in the monolayer during the coalescence process. Video tracking software was used to track the particles and extract data based on the video footage. Visual inspection indicated that the coalescence of the bubble with the monolayer was a chaotic process which led the interface to oscillate to an extent that the particles underwent complete rearrangement. A simple analysis was carried out on the main forces involved in particle motion and rearrangement at the oscillating air-water interface. The motion characteristic of particles was evaluated by speed and mean-square displacement (MSD). The results showed that the butanol-treated particles had higher speed and MSD than the particles with a stronger affinity to the air-water interface. Similar results were also found at high subphase pH and low packing factor.

Janus Particles at Fluid Interfaces: Stability and Interfacial Rheology

The use of the Janus motif in colloidal particles, i.e., anisotropic surface properties on opposite faces, has gained significant attention in the bottom-up assembly of novel functional structures, design of active nanomotors, biological sensing and imaging, and polymer blend compatibilization. This review is focused on the behavior of Janus particles in interfacial systems, such as particle-stabilized (i.e., Pickering) emulsions and foams, where stabilization is achieved through the binding of particles to fluid interfaces. In many such applications, the interface could be subjected to deformations, producing compression and shear stresses. Besides the physicochemical properties of the particle, their behavior under flow will also impact the performance of the resulting system. This review article provides a synopsis of interfacial stability and rheology in particle-laden interfaces to highlight the role of the Janus motif, and how particle anisotropy affects interfacial mechanics.

Interfacial viscoelasticity and jamming of colloidal particles at fluid-fluid interfaces: a review

Colloidal particles can be adsorbed at fluid-fluid interfaces, a phenomenon frequently observed in particle-stabilized foams, Pickering emulsions, and bijels. Particles adsorbed at interfaces exhibit unique physical and chemical behaviors, which affect the mechanical properties of the interface. Therefore, interfacial colloidal particles are of interest in terms of both fundamental and applied research. In this paper, we review studies on the adsorption of colloidal particles at fluid-fluid interfaces, from both thermodynamic and mechanical points of view, and discuss the differences as compared with surfactants and polymers. The unique particle interactions induced by the interfaces as well as the particle dynamics including lateral diffusion and contact line relaxation will be presented. We focus on the rearrangement of the particles and the resultant interfacial viscoelasticity. Particular emphasis will be given to the effects of particle shape, size, and surface hydrophobicity on the interfacial particle assembly and the mechanical properties of the obtained particle layer. We will also summarize recent advances in interfacial jamming behavior caused by adsorption of particles at interfaces. The buckling and cracking behavior of particle layers will be discussed from a mechanical perspective. Finally, we suggest several potential directions for future research in this area.

Interfacial Properties of Chitosan in Interfacial Shear and Capsule Compression

The time-dependent behavior of surface-active adsorption layers at the oil/water interface can dictate emulsion behavior at both the micro- and macroscale. In addition, self-healing behavior of the adsorption layer may benefit emulsion stability subject to large deformation under processing or during final application. We explore the behavior of chitosan, a known hydrophilic emulsifier, which forms nanoparticle aggregates when the concentration of acetate buffer exceeds 0.3 M. We observe a Pickering adsorption layer building and strain-dependent behavior of the chitosan at the medium chain triglyceride oil/water interface. We compare this to the behavior of identical chitosan layers coated on oil droplets via atomic force microscopy colloidal probe compression in both linear and oscillatory compressions. In both interfacial shear rheometry and the capsule compression, a thick, elastic layer with strong time-dependent recovery behavior is observed, suggesting that the layer has some self-healing capabilities.

A Review on Bubble Stability in Fresh Concrete: Mechanisms and Main Factors

In order to improve the stability of air bubbles in fresh concrete, it is of great significance to have a better understanding of the mechanisms and main influencing factors of bubble stability. In the present review, the formation and collapse process of air bubbles in fresh concrete are essentially detailed; and the advances of major influencing factors of bubble stability are summarized. The results show that the surface tension of air-liquid interface exerts a huge impact on bubble stability by reducing surface free energy and Plateau drainage, as well as increasing the Gibbs surface elasticity. However, surface tension may not be the only determinant of bubble stability. Both the strength of bubble film and the diffusion rate of air through the membrane may also dominate bubble stability. The application of nano-silica is a current trend and plays a key role in ameliorating bubble stability. The foam stability could be increased by 6 times when the mass fraction of nano-particle reached 1.5%.

Adsorption and interfacial structure of nanocelluloses at fluid interfaces

Nanocelluloses (NCs), more specifically cellulose nanocrystals and nanofibrils, are a green alternative for the stabilization of fluid interfaces. The adsorption of NCs at oil-water interfaces facilitates the formation of stable and biocompatible Pickering emulsions. In contrast, unmodified NCs are not able to stabilize foams. As a consequence, NCs are often hydrophobized by covalent modifications or adsorption of surfactants, allowing also the stabilization of foams or functional inverse, double, and stimuli-responsive emulsions. Although the interfacial stabilization by NCs is readily exploited, the driving force of adsorption and stabilization mechanisms remained long unclear. Here, we summarize the recent advances in the understanding of NC adsorption regarding kinetics, isotherms, and energetic aspects, as well as their interfacial structure, surface coverage, and contact angle. We thereby distinguish unmodified NCs, covalently modified NCs, and surfactant enhanced adsorption.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Branching of interfacial cracks of carbon nanotube layers at the air-water interface⋆

We study the surfactant-induced fracture of carbon nanotube layers at the air-water interface. The interfacial cracks exhibit branched morphologies. The propagation velocity V of the cracks follows a power law as [Formula: see text] , which is independent of the surface coverage of the layers as well as the surfactant concentration. However, the crack morphology changes from lightning-like to flower-like with the increasing of SDS concentration. A higher surfactant concentration does not accelerate the crack propagation velocity, whereas it significantly enhances the crack areas due to the stronger interfacial compression effect. Our results may shed light on the understanding of branching dynamics of interfacial cracks for 2-dimensional viscoelastic systems.

Interfacial Rheology of Charged Anisotropic Cellulose Nanocrystals at the Air-Water Interface

Cellulose nanocrystals (CNCs) have received attention as a biological alternative for the stabilization of fluid interfaces, yielding biocompatible and sustainable emulsions, foams, and aerogels. The interfacial behavior of nanoparticles with shape anisotropy and surface charge like CNCs is still poorly understood, although it ultimately dictates the mechanical properties and stability of the macroscopic colloidal material. Here, we report on the linear and nonlinear interfacial dilatational and shear rheology of CNCs at the air-water interface. We observed the formation of viscoelastic CNC layers at comparably low surface coverage, which was attributed to the shape anisotropy of CNCs. Further, the interfacial elasticity of CNC layers can be modulated by salt-induced charge screening, thereby shifting the interplay of repulsive and attractive CNC interactions. CNC layers had a viscous character without salt, followed by increasing viscoelasticity upon salt addition. CNC layers display strain hardening during compression and show a yield stress followed by flow under shear. The observed interfacial behavior is discussed in the context of CNC-stabilized foam and emulsion properties. We conclude that understanding the CNC interfacial behavior may help improve the performance of CNC-stabilized colloidal materials.

Controlling the stability of Pickering emulsions by pH-responsive nanoparticles

Electrostatic dissipative particle dynamics simulations were conducted to model the interactions between emulsion droplets stabilized by pH-sensitive polyelectrolyte-grafted nanoparticles. Using a steered molecular dynamics approach, a mechanistic study of forced coalescence was performed to probe the resistance between two particle-covered droplets. The degree of ionization of the grafted polyelectrolytes was adjusted to capture the pH responsiveness. The maximal resistance forces were measured to quantitatively discriminate the efficacy of particles in stabilizing emulsions at different degrees of ionization. Through analyzing droplet dynamics, resistance force variation, and electric field, we discovered that the resistance is attributed to direct electrostatic repulsion, the image charge effect near the water-oil interface, and steric hindrance among extended polymers. When the particle density on the droplet surface is relatively low, the increasing resistance forces at higher degrees of ionization can effectively prevent droplet coalescence. Oppositely, the ionization compromises emulsion stability when the particle surface coverage is high. Substantial desorption of particles from the interface was triggered as the degree of ionization increases. This in turn reduces resistance force and facilitates coalescence. Moreover, the nanoparticles prevent coalescence at high surface coverages by forming dense layers at individual interfaces, while the particle bridges straddling two interfaces were found at low surface coverages, which can also keep the droplets apart.

Physico-chemical foundations of particle-laden fluid interfaces

Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.

Structure and Dynamics of Stimuli-Responsive Nanoparticle Monolayers at Fluid Interfaces

Stimuli-responsive nanoparticles at fluid interfaces offer great potential for realizing on-demand and controllable self-assembly that can benefit various applications. Here, we conducted electrostatic dissipative particle dynamics simulations to provide a fundamental understanding of the microstructure and interfacial dynamics of responsive nanoparticle monolayers at a water-oil interface. The model nanoparticle is functionalized with polyelectrolytes to render the pH sensitivity, which permits further manipulation of the monolayer properties. The monolayer structure was analyzed in great detail through the density and electric field distributions, structure factor, and Voronoi tessellation. Even at a low surface coverage, a continuous disorder-to-order phase transition was observed when the particle's degree of ionization increases in response to pH changes. The six-neighbor particle fraction and bond orientation order parameter quantitatively characterize the structural transition induced by long-range electrostatic interactions. Adding salt can screen the electrostatic interactions and offer additional control on the monolayer structure. The detailed dynamics of the monolayer in different states was revealed by analyzing mean-squared displacements, in which different diffusion regimes were identified. The self-diffusion of individual particles and the collective dynamics of the whole monolayer were probed and correlated with the structural transition. Our results provide deeper insight into the dynamic behavior of responsive nanoparticle surfactants and lay the groundwork for bottom-up synthesis of novel nanomaterials, responsive emulsions, and microdroplet reactors.

Nonlinear mechanical behaviors of a nanoparticle monolayer at the air-water interface

Nanoparticle can adsorb at the air-water interface and gives rise to the special interfacial mechanical properties. With the influence of external stimulus, the adsorption state of the particles may be changed and in turn the mechanical properties of the particle layer. In this work, we study the mechanical properties of a monolayer of silica nanoparticles deposited in the Langmuir trough. The area of the monolayer was varied sinusoidally by two oscillating barriers and the surface pressure was monitored by two orthogonal Wilhelmy plates. It has been found that the surface pressure of the particle layer exhibits a significant anisotropic effect. At the early stage of the oscillation, the surface pressure versus time is sinusoidal. However, with the increase of the oscillation time, the response of the particle layer significantly deviates the sinusoidal function, which implies that the response becomes nonlinear caused by a long-term oscillation. The fast Fourier Transformation (FFT) of the surface pressure data shows that the non-sinusoidal response is composed of several fundamental frequency responses. We eventually obtained the time variation of the compression modulus E and shear modulus G . A possible mechanism was proposed to account for the mechanical properties change and the nonlinear behavior of the particle monolayer.

Interfacial rheology of model particles at liquid interfaces and its relation to (bicontinuous) Pickering emulsions

Interface-dominated materials are commonly encountered in both science and technology, and typical examples include foams and emulsions. Conventionally stabilised by surfactants, emulsions can also be stabilised by micron-sized particles. These so-called Pickering-Ramsden (PR) emulsions have received substantial interest, as they are model arrested systems, rather ubiquitous in industry and promising templates for advanced materials. The mechanical properties of the particle-laden liquid-liquid interface, probed via interfacial rheology, have been shown to play an important role in the formation and stability of PR emulsions. However, the morphological processes which control the formation of emulsions and foams in mixing devices, such as deformation, break-up, and coalescence, are complex and diverse, making it difficult to identify the precise role of the interfacial rheological properties. Interestingly, the role of interfacial rheology in the stability of bicontinuous PR emulsions (bijels) has been virtually unexplored, even though the phase separation process which leads to the formation of these systems is relatively simple and the interfacial deformation processes can be better conceptualised. Hence, the aims of this topical review are twofold. First, we review the existing literature on the interfacial rheology of particle-laden liquid interfaces in rheometrical flows, focussing mainly on model latex suspensions consisting of polystyrene particles carrying sulfate groups, which have been most extensively studied to date. The goal of this part of the review is to identify the generic features of the rheology of such systems. Secondly, we will discuss the relevance of these results to the formation and stability of PR emulsions and bijels.

The Potential of Liquid Marbles for Biomedical Applications: A Critical Review

Liquid marbles (LM) are freestanding droplets covered by micro/nanoparticles with hydrophobic/hydrophilic properties, which can be manipulated as a soft solid. The phenomenon that generates these soft structures is regarded as a different method to generate a superhydrophobic behavior in the liquid/solid interface without modifying the surface. Several applications for the LM have been reported in very different fields, however the developments for biomedical applications are very recent. At first, the LM properties are reviewed, namely shell structure, LM shape, evaporation, floatability and robustness. The different strategies for LM manipulation are also described, which make use of magnetic, electrostatic and gravitational forces, ultraviolet and infrared radiation, and approaches that induce LM self-propulsion. Then, very distinctive applications for LM in the biomedical field are presented, namely for diagnostic assays, cell culture, drug screening and cryopreservation of mammalian cells. Finally, a critical outlook about the unexplored potential of LM for biomedical applications is presented, suggesting possible advances on this emergent scientific area.

Approaches to self-assembly of colloidal monolayers: A guide for nanotechnologists

Self-assembly of quasi-spherical colloidal particles in two-dimensional (2D) arrangements is essential for a wide range of applications from optoelectronics to surface engineering, from chemical and biological sensing to light harvesting and environmental remediation. Several self-assembly approaches have flourished throughout the years, with specific features in terms of complexity of the implementation, sensitivity to process parameters, characteristics of the final colloidal assembly. Selecting the proper method for a given application amidst the vast literature in this field can be a challenging task. In this review, we present an extensive classification and comparison of the different techniques adopted for 2D self-assembly in order to provide useful guidelines for scientists approaching this field. After an overview of the main applications of 2D colloidal assemblies, we describe the main mechanisms underlying their formation and introduce the mathematical tools commonly used to analyse their final morphology. Subsequently, we examine in detail each class of self-assembly techniques, with an explanation of the physical processes intervening in crystallization and a thorough investigation of the technical peculiarities of the different practical implementations. We point out the specific characteristics of the set-ups and apparatuses developed for self-assembly in terms of complexity, requirements, reproducibility, robustness, sensitivity to process parameters and morphology of the final colloidal pattern. Such an analysis will help the reader to individuate more easily the approach more suitable for a given application and will draw the attention towards the importance of the details of each implementation for the final results.

Interfacial Rheology of Sterically Stabilized Colloids at Liquid Interfaces and Its Effect on the Stability of Pickering Emulsions

Particle-laden interfaces can be used to stabilize a variety of high-interface systems, from foams over emulsions to polymer blends. The relation between the particle interactions, the structure and rheology of the interface, and the stability of the system remains unclear. In the present work, we experimentally investigate how micron-sized, near-hard-sphere-like particles affect the mechanical properties of liquid interfaces. In particular, by comparing dried and undried samples, we investigate the effect of aggregation state on the properties of the particle-laden liquid interface and its relation to the stability of the corresponding Pickering emulsions. Partially aggregated suspensions give rise to a soft-solid-like response under shear, whereas for stable PMMA particulate layers a liquid-like behavior is observed. For interfacial creep-recovery measurements, we present an empirical method to correct for the combined effect of the subphase drag and the compliance of the double-wall ring geometry, which makes a significant contribution to the apparent elasticity of weak interfaces. We further demonstrate that both undried and dried PMMA particles can stabilize emulsions for months, dispelling the notion that particle aggregation, in bulk or at the interface, is required to create stable Pickering emulsions. Our results indicate that shear rheology is a sensitive probe of colloidal interactions but is not necessarily a predictor of the stability of interfaces, e.g., in quiescent Pickering emulsions, as in the latter the response to dilatational deformations can be of prime importance.

Mechanical Compression to Characterize the Robustness of Liquid Marbles

In this work, we have devised a new approach to measure the critical pressure that a liquid marble can withstand. A liquid marble is gradually squeezed under a mechanical compression applied by two parallel plates. It ruptures at a sufficiently large applied pressure. Combining the force measurement and the high-speed imaging, we can determine the critical pressure that ruptures the liquid marble. This critical pressure, which reflects the mechanical robustness of liquid marbles, depends on the type and size of the stabilizing particles as well as the chemical nature of the liquid droplet. By investigating the surface of the liquid marble, we attribute its rupture under the critical pressure to the low surface coverage of particles when highly stretched. Moreover, the applied pressure can be reflected by the inner Laplace pressure of the liquid marble considering the squeezing test is a quasi-static process. By analyzing the Laplace pressure upon rupture of the liquid marble, we predict the dependence of the critical pressure on the size of the liquid marble, which agrees well with experimental results.

Hard and soft colloids at fluid interfaces: Adsorption, interactions, assembly & rheology

Soft microgel particles inherently possess qualities of both polymers as well as particles. We review the similarities and differences between soft microgel particles and stiff colloids at fluid-fluid interfaces. We compare two fundamental aspects of particle-laden interfaces namely the adsorption kinetics and the interactions between adsorbed particles. Although it is well established that the transport of both hard particles and microgels to the interface is driven by diffusion, the analysis of the adsorption kinetics needs reconsideration and a proper equation of state relating the surface pressure to the adsorbed mass should be used. We review the theoretical and experimental investigations into the interactions of particles at the interface. The rheology of the interfacial layers is intimately related to the interactions, and the differences between hard particles and microgels become pronounced. The assembly of particles into the layer is another distinguishing factor that separates hard particles from soft microgel particles. Microgels deform substantially upon adsorption and the stability of a microgel-stabilized emulsion depends on the conformational changes triggered by external stimuli.

Collapse of Particle-Laden Interfaces under Compression: Buckling vs Particle Expulsion

Colloidal particles can bind to fluid interfaces with a capillary energy that is thousands of times the thermal energy. This phenomenon offers an effective route to emulsion and foam stabilization where the stability is influenced by the phase behavior of the particle-laden interface under deformation. Despite the vast interest in particle-laden interfaces, the key factors that determine the collapse of such an interface under compression have remained relatively unexplored. In this study, we illustrate the significance of the particle surface wettability and presence of electrolyte in the subphase on interparticle interactions at the interface and the resulting collapse mode. Various collapse mechanisms including buckling, particle expulsion, and multilayer formation are reported and interpreted in terms of particle-particle and particle-interface interactions.

The role of the hydrophobic phase in the unique rheological properties of saponin adsorption layers

Saponins are a diverse class of natural, plant derived surfactants, with peculiar molecular structure consisting of a hydrophobic scaffold and one or several hydrophilic oligosaccharide chains. Saponins have strong surface activity and are used as natural emulsifiers and foaming agents in food and beverage, pharmaceutical, ore processing, and other industries. Many saponins form adsorption layers at the air-water interface with extremely high surface elasticity and viscosity. The molecular origin of the observed unique interfacial visco-elasticity of saponin adsorption layers is of great interest from both scientific and application viewpoints. In the current study we demonstrate that the hydrophobic phase in contact with water has a very strong effect on the interfacial properties of saponins and that the interfacial elasticity and viscosity of the saponin adsorption layers decrease in the order: air > hexadecane ≫ tricaprylin. The molecular mechanisms behind these trends are analyzed and discussed in the context of the general structure of the surfactant adsorption layers at various nonpolar phase-water interfaces.

Mixtures of latex particles and the surfactant of opposite charge used as interface stabilizers--influence of particle contact angle, zeta potential, flocculation and shear energy

We investigate the stabilization of air-water interfaces by mixtures of negatively charged latex particles (sulfate polystyrene) and cationic surfactants (alkyl trimethylammonium bromides). First we report results concerning the binding of surfactant molecules to the latex particles. As the surfactant concentration increases, the charge of the particles reverses, from negative to positive, because CnTAB first binds electrostatically to the latex particles and then through hydrophobic interaction with the monolayer already adsorbed on the particles as well as directly with the hydrophobic surface of the latex. Over a large range of surfactant concentrations around the charge inversion, a strong flocculation is observed and 100 μm large aggregates form in the suspension. Unlike previous studies published on mixtures of inorganic particles with oppositely charged surfactants, we show that we can vary the sign of the zeta potential of the particles without changing the contact angle of the particles over a large range of surfactant concentrations. Indeed, the latex particles that we study are more hydrophobic than inorganic particles, hence adding moderate concentrations of the surfactant results in a weak variation of the contact angle while the charge of the particles can be reversed. This enables decoupling of the effect of zeta potential and contact angle on the interfacial properties of the mixtures. Our study shows that the contact angle and the charge of the particles are not sufficient parameters to control the foam properties, and the key-parameters are the flocculation state and the shear energy applied to produce the foam. Indeed, flocculated samples, whatever the sign of the zeta potential, enable production of a stable armour at the interface. The large aggregates do not adsorb spontaneously at the interface because of their large size, however when a large shear energy is used to produce the foam very stable foam is obtained, where particles are trapped at interfaces. We suggest that the large aggregates may be broken during shear and may reform at the interface to form a solid armour. A simple calculation taking into account the adsorption dynamics of the aggregates as a function of their size is consistent with this hypothesis.

Particle laden fluid interfaces: dynamics and interfacial rheology

We review the dynamics of particle laden interfaces, both particle monolayers and particle+surfactant monolayers. We also discuss the use of the Brownian motion of microparticles trapped at fluid interfaces for measuring the shear rheology of surfactant and polymer monolayers. We describe the basic concepts of interfacial rheology and the different experimental methods for measuring both dilational and shear surface complex moduli over a broad range of frequencies, with emphasis in the micro-rheology methods. In the case of particles trapped at interfaces the calculation of the diffusion coefficient from the Brownian trajectories of the particles is calculated as a function of particle surface concentration. We describe in detail the calculation in the case of subdiffusive particle dynamics. A comprehensive review of dilational and shear rheology of particle monolayers and particle+surfactant monolayers is presented. Finally the advantages and current open problems of the use of the Brownian motion of microparticles for calculating the shear complex modulus of monolayers are described in detail.

Nanoparticles adsorbed at the water/oil interface: coverage and composition effects on structure and diffusion

Dissipative particle dynamics simulations are performed to study the structural and dynamical properties of various systems of nanoparticles accumulated at the water/oil interface. Homogeneous and Janus nanoparticles with different surface compositions are studied. For all nanoparticles, as the surface density increases, a transition from a liquidlike to a solidlike state is observed, as expected. At a high density of nanoparticles, hexagonal structures emerge and the nanoparticles' self-diffusion coefficient decreases because of caging effects. Similar results are observed for nanoparticles with different surface chemistry. Because different nanoparticles have different contact angles at the water/oil interface, the results obtained for systems containing mixed nanoparticles are more interesting. For example, our results show that the self-diffusion coefficient is not a monotonic function of the system composition, caused by the complex relation between hydrodynamic interactions and effective nanoparticle-nanoparticle interactions.

Origin and control of adhesion between emulsion drops stabilized by thermally sensitive soft colloidal particles

We used soft microgels made of poly(N-isopropylacrylamide) (pNIPAM) of variable cross-linking degrees and the same colloidal size to stabilize oil-in-water Pickering emulsions. The extent of droplet flocculation increased and the resistance of the emulsions to mechanical stresses decreased as the cross-linking density was augmented. Large flat films were separating the droplets, and we could measure the adhesion angle at the junction with the free interfaces through several microscopy methods. The size of the flat films and the values of the angles were reflecting strong adhesive interactions between the interfaces as a result of microgel bridging. In parallel, cryo-SEM imaging of the thin films allowed a precise determination of their structure. The evolution of the adhesion angle and of the film structure as a function of microgels cross-linking density provided interesting insights into the impact of particle softness on film adhesiveness and emulsion stability. We exploited our main findings to propose a novel route for controlling the emulsions end-use properties (flocculation and stability). Owing to particle softness and thermal sensitivity, the interfacial coverage was a path function (it depended on the sample "history"). As a consequence, by adapting the emulsification conditions, the interfacial monolayer could be trapped in a very dense and rigid configuration, providing improved resistance to bridging flocculation and to flow-induced coalescence.