Gelatin-Modified Nanofibrous PHBV Tube as Artificial Nerve Graft for Rat Sciatic Nerve Regeneration

State of the Art and Current Challenges on Electroactive Biomaterials and Strategies for Neural Tissue Regeneration

The loss or failure of an organ/tissue stands as one of the healthcare system's most prevalent, devastating, and costly challenges. Strategies for neural tissue repair and regeneration have received significant attention due to their particularly strong impact on patients' well-being. Many research efforts are dedicated not only to control the disease symptoms but also to find solutions to repair the damaged tissues. Neural tissue engineering (TE) plays a key role in addressing this problem and significant efforts are being carried out to develop strategies for neural repair treatment. In the last years, active materials allowing to tune cell-materials interaction are being increasingly used, representing a recent paradigm in TE applications. Among the most important stimuli influencing cell behavior are the electrical and mechanical ones. In this way, materials with the ability to provide this kind of stimuli to the neural cells seem to be appropriate to support neural TE. In this scope, this review summarizes the different biomaterials types used for neural TE, highlighting the relevance of using active biomaterials and electrical stimulation. Furthermore, this review provides not only a compilation of the most relevant studies and results but also strategies for novel and more biomimetic approaches for neural TE.

Gelatin Blends Enhance Performance of Electrospun Polymeric Scaffolds in Comparison to Coating Protocols

The electrospinning of hybrid polymers is a versatile fabrication technique which takes advantage of the biological properties of natural polymers and the mechanical properties of synthetic polymers. However, the literature is scarce when it comes to comparisons of blends regarding coatings and the improvements offered thereby in terms of cellular performance. To address this, in the present study, nanofibrous electrospun scaffolds of polycaprolactone (PCL), their coating and their blend with gelatin were compared. The morphology of nanofibrous scaffolds was analyzed under field emission scanning electron microscopy (FE-SEM), indicating the influence of the presence of gelatin. The scaffolds were mechanically tested with tensile tests; PCL and PCL gelatin coated scaffolds showed higher elastic moduli than PCL/gelatin meshes. Viability of mouse embryonic fibroblasts (MEF) was evaluated by MTT assay, and cell proliferation on the scaffold was confirmed by fluorescence staining. The positive results of the MTT assay and cell growth indicated that the scaffolds of PCL/gelatin excelled in comparison to other scaffolds, and may serve as good candidates for tissue engineering applications.

Fabrication of a 3D Printed PCL Nerve Guide: In Vitro and In Vivo Testing

Nerve guides are medical devices designed to guide proximal and distal ends of injured peripheral nerves in order to assist regeneration of the damaged nerves. A 3D-printed polycaprolactone (PCL) nerve guide using an aligned gelatin-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) electrospun mat, seeded with PC12 and Schwann cells (SCs) is produced. During characterization with microCT and SEM porosity (55%), pore sizes (675 ± 40 µm), and fiber diameters (382 ± 25 µm) are determined. Electrospun fibers have degree of alignment of 7°, indicating high potential for guidance. On Day 14, PC12 cells migrated from proximal to distal end of nerve guide when SCs are seeded on the guide. After 28 days, over 95% of PC12 are alive and aligned. PC12 cells express early differentiation marker beta-tubulin 10 times more than late marker NeuN. In a 10 mm rat sciatic nerve injury, functional recovery evaluated by using static sciatic index (SSI) is observed in mat-free guides and guides containing mat and SCs. Nerve conduction velocities are also improved in these groups. Histological stainings showed tissue growth around nerve guides with highest new tissue organization being observed with mat and cell-free guides. These suggest 3D-printed PCL nerve guides have significant potential for treatment of peripheral nerve injuries.

Effects of Platelet-Rich Fibrin/Collagen Membrane on Sciatic Nerve Regeneration

ABSTRACT

Alternative treatment approaches to improve the regeneration ability of damaged peripheral nerves are currently under investigation. The aim of the current study was to evaluate the effects of leucocyte/platelet-rich fibrin (L-PRF) with or without a collagen membrane as a supporter on crushed sciatic nerve healing in a rat model. Recovery of motor function and electrophysiologic measurements were evaluated at 4 weeks postoperatively. The whole number of myelinated axons, peripheral nerve axon density, average nerve fiber diameter (μm), and G-ratio were analyzed and compered among the groups. Functional, electrophysiological, and histological evaluations showed no significant difference among the groups with the exception of the L-PRF with collagen membrane groups that showed relatively positive effects on the functional and histological nerve recovery. In addition, the collagen membrane with L-PRF can be effect in nerve regeneration.

3D bio-printing technology for body tissues and organs regeneration

In the last decade, the use of new technologies in the reconstruction of body tissues has greatly developed. Utilising stem cell technology, nanotechnology and scaffolding design has created new opportunities in tissue regeneration. The use of accurate engineering design in the creation of scaffolds, including 3D printers, has been widely considered. Three-dimensional printers, especially high precision bio-printers, have opened up a new way in the design of 3D tissue engineering scaffolds. In this article, a review of the latest applications of this technology in this promising area has been addressed.

Fabrication of polyhydroxybutyrate (PHB)/γ-Fe2O3 nanocomposite film and its properties study

Magnetic separation has numerous advantages in isolating cancerous and normal cells used in the diagnosis and treatment sectors. Here, we produced magnetic nanocomposite films made of polyhydroxybutyrate (PHB)/magnetite nanoparticles (γ-Fe2O3), and the properties of the films by SEM, TEM, FTIR, DMTA, contact angle, and cellular analyses were investigated. The microscopic images showed uniform distribution of γ-Fe2O3 magnetic nanoparticles in polymeric matrix. The chemical bounds between magnetic nanoparticles and polymeric matrix demonstrated using the FTIR spectrophotometer. The DMTA and contact angle results indicated an increase in the glass transition temperature and hydrophilic properties of nanocomposites is achieved by increasing the magnetic nanoparticles amount in polymer matrix. The cellular results were showed that adhesion of cancer cells compared to normal cells was significantly enhanced by the induction of a magnetic field. These nanocomposite films can be used as a substrate for cellular adhesion and separation processes.

Derivation of epithelial-like cells from eyelid fat-derived stem cells in thermosensitive hydrogel

Injectable hydrogel is one of the great interests for tissue engineering and cell encapsulation. In the study, the thermosensitive chitosan/gelatin/β-glycerol phosphate (C/G/GP) disodium salt hydrogels were designed and investigated by different analyses. The eye fat-derived stem cells were used to evaluate the biocompatibility of hydrogels based on their phenotypic profile, viability, proliferation, and attachment ability. The results show that the sol/gel transition temperature of the C/G/GP hydrogel was in the range of 31.1-33.8 °C at neutral pH value, the gelation time was shortened, and the gel strength also improved at body temperature when compared with the C/GP hydrogel. In vitro cell culture experiments with eyelid fat-derived stem cells in hydrogel showed beneficial effects on the cell phenotypic morphology, proliferation, and differentiation. Microscopic figures showed that the eyelid fat stem cell were firmly anchored to the substrates and were able to retain a normal stem cell phenotype. Immunocytochemistry (ICC) and real-time-PCR results revealed change in the expression profile of eyelid fat stem cells grown with hydrogels when compared to those grown on control in epithelial induction condition. This study indicates that using chitosan/gelatin/β-glycerol phosphate hydrogel for cell culture is feasible and may apply in minimal invasive surgery in the future.

Synthesis of calcium phosphate-zirconia scaffold and human endometrial adult stem cells for bone tissue engineering

To address the hypothesis that using a zirconia (ZrO2)/ β-tricalcium phosphate (β-TCP) composite might improve both the mechanical properties and cellular compatibility of the porous material, we fabricated ZrO2/β-TCP composite scaffolds with different ZrO2/β-TCP ratios, and evaluated their physical and mechanical characteristics, also the effect of three-dimensional (3D) culture (ZrO2/β-TCP scaffold) on the behavior of human endometrial stem cells. Results showed the porosity of a ZrO2/β-TCP scaffold can be adjusted from 65% to 84%, and the compressive strength of the scaffold increased from 4.95 to 6.25 MPa when the ZrO2 content increased from 30 to 50 wt%. The cell adhesion and proliferation in the ZrO2/β-TCP scaffold was greatly improved when ZrO2 decreased. Moreover, in vitro study showed that an osteoblasts-loaded ZrO2/β-TCP scaffold provided a suitable 3D environment for osteoblast survival and enhanced bone regeneration. We thus showed that a porous ZrO2/β-TCP composite scaffold has excellent mechanical properties, and cellular/tissue compatibility, and would be a promising substrate to achieve both bone reconstruction and regeneration needed during in vivo study for treatment of large bone defects.