Barium-cross-linked alginate-gelatine microcapsule as a potential platform for stem cell production and modular tissue formation

Betulin Stimulates Osteogenic Differentiation of Human Osteoblasts-Loaded Alginate-Gelatin Microbeads

Osteoporosis, a terminal illness, has emerged as a global public health problem in recent years. The long-term use of bone anabolic drugs to treat osteoporosis causes multi-morbidity in elderly patients. Alternative therapies, such as allogenic and autogenic tissue grafts, face important issues, such as a limited source of allogenic grafts and tissue rejection in autogenic grafts. However, stem cell therapy has been shown to increase bone regeneration and decrease osteoporotic bone formation. Stem cell therapy combined with betulin (BET) supplementation might be adequate for bone remodeling and new bone tissue generation. In this study, the effect of BET on the viability and osteogenic differentiation of hFOB 1.19 cells was investigated. The cells were encapsulated in alginate-gelatin (AlGel) microbeads. In vitro tests were conducted during the 12 d of incubation. While BET showed cytotoxic activity (>1 µM) toward non-encapsulated hFOB 1.19 cells, encapsulated cells retained their functionality for up to 12 days, even at 5 µM BET. Moreover, the expression of osteogenic markers indicates an enhanced osteo-inductive effect of betulin on encapsulated hFOB 1.19, compared to the non-encapsulated cell culture. The 3D micro-environment of the AlGel microcapsules successfully protects the hFOB 1.19 cells against BET cytotoxicity, allowing BET to improve the mineralization and differentiation of osteoblast cells.

Producing mixed-soy protein adsorption layers on alginate microgels to controlled-release β-carotene

In this study, the effects of soy protein isolate (SPI) on the morphology, encapsulation efficiency, storage stability, swelling behavior, and in vitro digestion behavior of calcium alginate (CA) microgels were investigated. CA and calcium alginate-SPI (CAS) microgels with encapsulated β-carotene were prepared by extruding a mixture of alginate and SPI using a co-extrusion technique, followed by cross-linking with Ca²⁺. All microgels exhibited homogeneous sizes and spherical shapes, and CAS microgels showed high levels of protein loading efficiency. The encapsulation efficiency and storage stability of β-carotene within CAS microgels were higher than those within CA microgels. The introduction of SPI into CAS microgels resulted in a higher degree of gel size shrinkage in gastric fluid and a lower degree of swelling in intestinal fluid compared to CA microgels. In vitro digestion was conducted to investigate the effects of the addition of SPI on the release behavior of CA and CAS microgels. Results obtained showed that CAS microgels were more resistant to simulated gastric fluid than CA microgels. Cryo-scanning electron microscopy (cryo-SEM) and confocal laser scanning microscopy (CLSM) observations indicated that the release behavior was dependent on the porosity of the CA and CAS microgels, and the porosity was influenced by the concentration of SPI. This study showed that the introduction of SPI to CA microgels can lead to the development of an effective controlled release delivery system.

Portable Quartz Crystal Resonator Sensor for Characterising the Gelation Kinetics and Viscoelastic Properties of Hydrogels

Hydrogel biomaterials have found use in various biomedical applications partly due to their biocompatibility and tuneable viscoelastic properties. The ideal rheological properties of hydrogels depend highly on the application and should be considered early in the design process. Rheometry is the most common method to study the viscoelastic properties of hydrogels. However, rheometers occupy much space and are costly instruments. On the other hand, quartz crystal resonators (QCRs) are devices that can be used as low-cost, small, and accurate sensors to measure the viscoelastic properties of fluids. For this reason, we explore the capabilities of a low-cost and compact QCR sensor to sense and characterise the gelation process of hydrogels while using a low sample amount and by sensing two different crosslink reactions: covalent bonds and divalent ions. The gelation of covalently crosslinked mucin hydrogels and physically crosslinked alginate hydrogels could be monitored using the sensor, clearly distinguishing the effect of several parameters affecting the viscoelastic properties of hydrogels, including crosslinking chemistry, polymer concentrations, and crosslinker concentrations. QCR sensors offer an economical and portable alternative method to characterise changes in a hydrogel material's viscous properties to contribute to this type of material design, thus providing a novel approach.

Preparation and characterization of multi-network hydrogels based on sodium alginate/krill protein/polyacrylamide-Strength, shape memory, conductivity and biocompatibility

Sodium alginate/krill protein/polyacrylamide (SA/AKP/PAM) hydrogel with "covalent bond-ion complex-hydrogen bond" multi-network structure was prepared by covalent cross-linking and complexion ion crosslinking using SA, AKP, and acrylamide (AM) as raw materials. The effects of ion species (Fe³⁺, Ba²⁺, Sr²⁺, Ca²⁺, and Zn²⁺) on the structure, morphology, and properties of multi-network hydrogels were studied in detail. The results showed that the mechanical strength of ionic cross-linked hydrogels increased significantly. The compressive strength of Fe³⁺ cross-linked hydrogels was 5.56 MPa, 16.13 times that of non-ionic crosslinked hydrogels. The results of ionic conductivity measurements showed that hydrogels had significant ionic conductivity and were sensitive to external forces. Interestingly, the hydrogel can be used as a capacitive pen in mobile phone writing, painting and dialing numbers. Moreover, ionic cross-linked hydrogels had a unique three-dimensional porous structure with gradient distribution, excellent shape memory effect, and good biocompatibility. Fe³⁺, Ba²⁺, Sr²⁺, and Ca²⁺ cross-linked hydrogels were nontoxic and conducive to the adhesion and growth of Schwann cells. These excellent properties of ionic cross-linked SA/AKP/PAM hydrogels have broad applications prospects in flexible electronic devices, sensors, soft electronic skins, and tissue engineering.

Collagen and nano-hydroxyapatite interactions in alginate-based microcapsule provide an appropriate osteogenic microenvironment for modular bone tissue formation

The addition of nano-hydroxyapatite (nHA) and collagen (Col) to the alginate (Alg) microcapsule hydrogel reduced swelling and degradation ratios while the compressive strength increased compared to Alg, Alg-Col, and Alg-nHA groups. MTT assay and Calcein-AM staining revealed an enhanced MG-63 osteoblasts viability in the Alg-nHA-Col hydrogel compared to the other groups. SEM showed the attachment of MG-63 osteoblasts inside Alg-Col hydrogels. Non-significant differences were found in antioxidant capacity of cells inside the Alg-nHA-Col hydrogel compared to the Alg group. Hematoxylin-Eosin staining showed the distribution of MG-63 osteoblasts inside microspheres. Calcium deposits, alkaline phosphatase (ALP) activity with the increase of intracellular calcium were found in Alg-nHA-Col group. Western blotting showed that levels of osteocalcin, ColA2, Sox-9, and ColA1 also significantly increased compared to the Alg, Alg-Col, Alg-nHA groups. The present study demonstrated that the addition of mineral nHA and protein (Col) into the Alg improves osteogenic potential and provides a 3D platform for modular bone tissue engineering.

Bioprinting a thick and cell-laden partially oxidized alginate-gelatin scaffold with embedded micro-channels as future soft tissue platform

Despite all the advancements in tissue engineering, one of the unsolved challenges is the mass transfer limitation. Therefore, the subject of pre-vascularization in the engineered tissues gets more attention to avoid necrotic core formation. In this study, we considered a design for interconnected channels with a muscle tissue-like structure, in silico and in vitro. A sequence of simple steps make it possible for us to use the same material, gelatin, as both a sacrificial material and one of the main components of the scaffold simultaneously. We defined a new approach to quantify the repeatability of a new combination of hydrogels (Partially Oxidized Alginate + Gelatin) for extrusion-based bioprinting. Additionally, the mechanical properties, hydrogel porosity, degradation time, and swelling ratio were also evaluated. Based on all these test results, the scaffold with the optimum properties was chosen for the bioprinting of adipose derived mesenchymal stem cells (ADMSCs) in the scaffolds with and without the channels. This bioprinted scaffold with microchannels showed promising mimicry of the microenvironment, leading to higher survival and proliferation rates of the cells by up to 250%. Based on these results, it has the potential to serve as a platform for further research in vascularization, healthy/disease modelling, and stem cell differentiation.

Comparative Study of Crystallization, Mechanical Properties, and In Vitro Cytotoxicity of Nanocomposites at Low Filler Loadings of Hydroxyapatite for Bone-Tissue Engineering Based on Poly(l-lactic acid)/Cyclo Olefin Copolymer

A poly(l-lactic acid)/nanohydroxyapatite (PLLA/nHA) scaffold works as a bioactive, osteoconductive scaffold for bone-tissue engineering, but its low degradation rate limits embedded HA in PLLA to efficiently interact with body fluids. In this work, nano-hydroxyapatite (nHA) was added in lower filler loadings (1, 5, 10, and 20 wt%) in a poly(l-lactic acid)/cyclo olefin copolymer10 wt% (PLLA/COC10) blend to obtain novel poly(l-lactic acid)/cyclo olefin copolymer/nanohydroxyapatite (PLLA/COC10-nHA) scaffolds for bone-tissue regeneration and repair. Furthermore, the structure-activity relationship of PLLA/COC10-nHA (ternary system) nanocomposites in comparison with PLLA/nHA (binary system) nanocomposites was systematically studied. Nanocomposites were evaluated for structural (morphology, crystallization), thermomechanical properties, antibacterial potential, and cytocompatibility for bone-tissue engineering applications. Scanning electron microscope images revealed that PLLA/COC10-nHA had uniform morphology and dispersion of nanoparticles up to 10% of HA, and the overall nHA dispersion in matrix was better in PLLA/COC10-nHA as compared to PLLA/nHA. Fourier transformation infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC) studies confirmed miscibility and transformation of the α-crystal form of PLLA to the ά-crystal form by the addition of nHA in all nanocomposites. The degree of crystallinity (%) in the case of PLLA/COC10-nHA 10 wt% was 114% higher than pure PLLA/COC10 and 128% higher than pristine PLLA, indicating COC and nHA are acting as nucleating agents in the PLLA/COC10-nHA nanocomposites, causing an increase in the degree of crystallinity (%). Moreover, PLLA/COC10-nHA exhibited 140 to 240% (1-20 wt% HA) enhanced mechanical properties in terms of ductility as compared to PLLA/nHA. Antibacterial activity results showed that 10 wt% HA in PLLA/COC10-nHA showed substantial activity against P. aeruginosa, S. aureus, and L. monocytogenes. In vitro cytocompatibility of PLLA/COC10 and PLLA nanocomposites with nHA osteoprogenitor cells (MC3T3-E1) and bone mesenchymal stem cells (BMSC) was evaluated. Both cell lines showed two- to three-fold enhancement in cell viability and 10- to 30-fold in proliferation upon culture on PLLA/COC10-nHA as compared to PLLA/nHA composites. It was observed that the ternary system PLLA/COC10-nHA had good dispersion and interfacial interaction resulting in improved thermomechanical and enhanced osteoconductive properties as compared to PLLA/nHA.

Incorporation of Barium Ions into Biomaterials: Dangerous Liaison or Potential Revolution?

In the present manuscript, a brief overview on barium, its possible utilization, and the aftermath of its behavior in organisms has been presented. As a bivalent cation, barium has the potential to be used in a myriad of biochemical reactions. A number of studies have exhibited both the unwanted outcome barium displayed and the advantages of barium laden compounds, tested in in vitro and in vivo settings. The plethora of prospective manipulations covered the area of hydrogels and calcium phosphates, with an end goal of examining barium's future in the tissue engineering. However, majority of data revert to the research conducted in the 20th century, without investigating the mechanisms of action using current state-of-the-art technology. Having this in mind, set of questions that are needed for possible future research arose. Can barium be used as a substitute for other biologically relevant divalent cations? Will the incorporation of barium ions hamper the execution of the essential processes in the organism? Most importantly, can the benefits outweigh the harm?

Development of alginate dialdehyde-gelatin based bioink with methylcellulose for improving printability

This study used methylcellulose (MC) to improve the printability of the alginate dialdehyde-gelatin (ADA-GEL) based bioink. The printability as well as the capability to maintain shape fidelity of ADA-GEL could be enhanced by the addition of 9% (w/v) MC. Moreover, the properties of the ink crosslinked with Ca²⁺ and Ba²⁺ were investigated. The samples crosslinked with Ba²⁺ were more stable and stiffer than the Ca²⁺ crosslinked samples. However, both Ca²⁺ and Ba²⁺ crosslinked samples exhibited a similar trend of MC release during incubation under cell culture conditions. The toxicity test indicated that both samples (crosslinked with Ca²⁺ and Ba²⁺) exhibited no toxic potential. The fabrication of cell-laden constructs using the developed bioinks was evaluated. The viability of ST2 cells in Ba²⁺ crosslinked samples increased while for Ca²⁺ crosslinked samples, a decreased viability was observed over the incubation time. After 21 days, cell spreading in the hydrogels crosslinked with Ba²⁺ occurred. However, a certain degree of cell damage was observed after incorporating the cells in the high viscosity bioink.

Alginate-chitosan core-shell microcapsule cultures of hepatic cells in a small scale stirred bioreactor: impact of shear forces and microcapsule core composition

A small scale stirred bioreactor was designed and the effect of different agitation rates (30, 60 and 100 rpm) was investigated on HepG2 cells cultured in alginate-chitosan (AC) core-shell microcapsule in terms of the cell proliferation and liver-specific function. The microencapsulated hepatic cells could proliferate well when they were cultured for 10 days at 30 rpm while the cell-laden microcapsules showed no cell proliferation at 100 rpm in the bioreactor system. Albumin production rate, as an important liver function, increased also 1.8- and 1.5- fold under stirring rate of 30 rpm compared to the static culture and 60 rpm of agitation, respectively. Moreover, In comparison with the static culture, about 1.5-fold increment in urea production was observed at 30 rpm. Similarly, the highest expressions of albumin and P450 genes were found at 30 rpm stirring rate, which were 4.9- and 19.2-fold of the static culture. Addition of collagen to the microcapsule core composition (ACol/C) could improve the cell proliferation and functionality at 60 rpm in comparison with the cell-laden microcapsules without collagen. The study demonstrated the hepatic cell-laden ACol/C microcapsule hydrogel cultured in the small scale stirred bioreactor at low mixing rate has a great potential for mass production of the hepatic cells while maintaining liver-specific functions.

Progress of gelatin-based microspheres (GMSs) as delivery vehicles of drug and cell

Gelatin has various attractive features as biomedical materials, for instance, biocompatibility, low immunogenicity, biodegradability, and ease of manipulation. In recent years, various gelatin-based microspheres (GMSs) have been fabricated with innovative technologies to serve as sustained delivery vehicles of drugs and genetic materials as well as beneficial bacteria. Moreover, GMSs have exhibited promising potentials to act as both cell carriers and 3D scaffold components in tissue engineering and regenerative medicine, which not only exhibit excellent injectability but also could be integrated into a macroscale construct with the laden cells. Herein, we aim to thoroughly summarize the recent progress in the preparations and biomedical applications of GMSs and then to point out the research direction in future. First, various methods for the fabrication of GMSs will be described. Second, the recent use of GMSs in tumor embolization and in the delivery of cells, drugs, and genetic material as well as bacteria will be presented. Finally, several key factors that may enhance the improvement of GMSs were suggested as delivery vehicles.

Bioprinting of radiopaque constructs for tissue engineering and understanding degradation behavior by use of Micro-CT

Bioprinting has emerged as a potential technique to fabricate tissue engineering constructs and in vitro models directly using living cells as a raw material for fabrication, conforming to the heterogeneity and architectural complexity of the tissues. In several of tissue engineering and in vitro disease modelling or surgical planning applications, it is desirable to have radiopaque constructs for monitoring and evaluation. In the present work, enhanced radiopaque constructs are generated by substituting Calcium ions with Barium ions for crosslinking of alginate hydrogels. The constructs are characterized for their structural integrity and followed by cell culture studies to evaluate their biocompatibility. This was followed by the radiopacity evaluation. The radiological images obtained by micro-CT technique was further applied to investigate the degradation behavior of the scaffolds. In conclusion, it is observed that barium crosslinking can provide a convenient means to obtain radiopaque constructs with potential for multi-faceted applications.

Gelatin improves peroxidase-mediated alginate hydrogel characteristics as a potential injectable hydrogel for soft tissue engineering applications

To develop an efficient injectable alginate-based hydrogel for soft tissue engineering applications, phenol moiety (Ph) was introduced into alginate (Alg-Ph), and the influence of gelatin as cell adhesive molecule was evaluated on the peroxidase-mediated alginate hydrogel properties and cultured chondrocytic cell behavior. Addition of gelatin (1.5% w/v) to Alg-Ph (1.5% w/v) hydrogels (Alg-Ph/gelatin) regulated characteristics of the enzymatically gellable alginate hydrogel with increasing gelation time to 5.1 min (76%). Swelling ratio and degradation rates of the Alg-Ph/gelatin hydrogel also increased 60 and 100%, respectively, while the mechanical strength value was 35% less than the Alg-Ph hydrogel. Scanning electron microscopy images showed that the addition of gelatin could also increase uniformity of pore sizes inside the Alg-Ph/gelatin hydrogels. The chondrocyte cells maintained their original phenotype and revealed statistically more metabolic activities in the Alg-Ph/gelatin hydrogel. Hydrogels subscutaneously implanted in rats could also be identified readily without complete absorption and signs of toxicity or any untoward reactions after 1 month. Viable chondrocyte cells inside globular aggregates were seen as red colored areas in the cell-laden hydrogels. The study demonstrates that enzymatically gellable alginate/gelatin hydrogel has fair potential as a natural-based injectable hydrogel for soft tissue engineering applications.

Enzymatically gellable gelatin improves nano-hydroxyapatite-alginate microcapsule characteristics for modular bone tissue formation

To maintain gelatin (Gel) as adhesive motifs inside alginate microcapsule as building blocks of modular approach, phenol moiety (Ph) was introduced into gelatin (Gel Ph). Addition of Gel Ph to alginate (Alg-Gel Ph) dramatically altered the physical properties of alginate-based hydrogels as compared to unmodified gelatin (Alg-Gel) addition. Alg-Gel Ph hydrogels revealed a dramatically lower swelling ratios (63%) as compared to Alg-Gel hydrogels (150%). Moreover, Gel Ph decreased 40% degradation rate of alginate-based hydrogels after 72 hr, while increasing compressive modulus 3.5-fold as compared to Alg-Gel hydrogels. Introducing nano-hydroxyapatite (nHA) to Alg-Gel Ph hydrogel (Alg-Gel Ph-nHA) could reduce degradation rate to 41.5% and improve compressive modulus of hydrogels significantly, reaching to 294 ± 2.5 kPa. The microencapsulated osteoblast-like cells proliferated considerably and showed more metabolic activities (two times) in Alg-Gel Ph-nHA microcapsules during a 21-day culture period, resulting in more calcium deposition and alkaline phosphatase (ALP) activities. The subcutaneous microcapsules could also be identified readily without complete absorption and signs of toxicity or any untoward reactions and viable osteoblast-like cells were seen as red colored areas in the central regions of cell-laden microcapsules after 1 month. The study demonstrated Alg-Gel Ph-nHA microcapsule as a promising 3D microenvironment for modular bone tissue formation.

Applications of alginate microspheres in therapeutics delivery and cell culture: Past, present and future

Polymers are the backbone of pharmaceutical drug delivery. There are several polymers with varying properties available today for use in different pharmaceutical applications. Alginate is widely used in biomedical research due to its attractive features such as biocompatibility, biodegradability, inertness, low cost, and ease of production and formulation. Encapsulation of therapeutic agents in alginate/alginate complex microspheres protects them from environmental stresses, including the acidic environment in the gastro-intestinal tract (GIT) and enzymatic degradation, and allows targeted and sustained delivery of the agents. Microencapsulation is playing an increasingly important role in drug delivery as evidenced by the recent surge in research articles on the use of alginate in the delivery of small molecules, cells, bacteria, proteins, vaccines, and for tissue engineering applications. Formulation of these alginate microspheres (AMS) are commonly achieved by conventional external gelation method using various instrumental manipulation such as vortexing, homogenization, ultrasonication or spray drying, and each method affects the overall particle characteristics. In this review, an inclusive summary of the currently available methods for the formulation of AMS, its recent use in the encapsulation and delivery of therapeutics, and future outlook will be discussed.

Nano-hydroxyapatite-alginate-gelatin microcapsule as a potential osteogenic building block for modular bone tissue engineering

To develop osteogenic building blocks for modular bone tissue engineering applications, influence of gelatin as cell adhesive molecule and nano-hydroxyapatite (nHA) as osteoconductive component was examined on alginate-based hydrogel properties and microencapsulated osteoblast-like cell behavior by using factorial experimental design technique. nHA and alginate showed a statistically significant impact on swelling reduction, and improvement of stability and mechanical strength of hydrogels, respectively. Gelatin influence, however, was in a reverse manner. nHA played imperative roles in promoting microencapsulated osteoblastic cell proliferation and function due to its bioactivity and mechanical strength improvement of hydrogels to the modulus range of mineralized bone tissue in vivo. The results and their statistical analysis also revealed the importance of interaction effect of gelatin and nHA. Proliferation and osteogenic function of the cells fluctuated with increasing gelatin concentration of microcapsules in the presence of nHA, demonstrating that hydrogel properties should be balanced to provide an efficient 3D osteoconductive microcapsule. Alginate (1%)-gelatin (2.5%)-nHA (0.5%) microcapsule with compressive modulus of 0.19 MPa ± 0.02, swelling ratio of 52% ± 8 (24 h) and degradation rate of 12% ± 4 (96 h) revealed a maximum performance for the cell proliferation and function, indicating a potential microcapsule composition to prepare building blocks for modular bone tissue engineering.

Encapsulation of rat cardiomyoblasts with alginate-gelatin microspheres preserves stemness feature in vitro

INTRODUCTION

The emergence of numerous tissue engineering and regenerative medicine techniques cell encapsulation paves a way to heal and restore the function of various injured tissues mainly cardiovascular system. Here, we aimed to investigate the role of alginate-gelatin encapsulation on the dynamic of rat cardiomyoblasts in vitro.

MATERIALS AND METHODS

Rat cardiomyoblasts cell line H9C2 were enclosed by using alginate-gelatin microspheres and incubated for 7 days. MTT method was used to examine cell viability. The level of genes associated with cardiomyoblasts maturation MYL7, NPPA, NKX2-5, and GATA4 real-time PCR. ELISA was used to measure the protein levels of Bcl-2 and Bax factor post-encapsulation. The level of SOD, GPx, and TAC was detected by biochemical analyses. Western blotting was performed to measure the content of AMP-activated protein kinase.

RESULTS

We found that encapsulation was able to increase the viability of rat cardiomyocytes after 7 days. The decreased level of Bcl-2 (p < 0.001) coincided with non-significant differences in the level of Bax (p > 0.05). The transcription level of all genes MYL7, NPPA, NKX2-5, and GATA4 were found to down-regulate compared to the control non-treated cells (p < 0.05). No significant differences were found regarding the level of SOD, GPx, and TAC compared to the control (p>0.05). According to western blotting, revealed a reduced level of AMPK following 7-day incubation of rat cardiomyoblasts (p < 0.05).

CONCLUSION

Data confirmed that the encapsulation of rat cardiomyoblasts with alginate-gelatin microspheres maintained the cells multipotentiality.