Ozone-driven photocatalyzed degradation and mineralization of pesticide, Triclopyr by Au/TiO2

Application of Engineered Nanomaterials as Nanocatalysts in Catalytic Ozonation: A Review

Given the growing scarcity of water and the continuous increase in emerging pollutants detected in water bodies, there is an imperative need to develop new, more effective, and sustainable treatments for wastewater. Advanced oxidation processes (AOPs) are considered a competitive technology for water treatment. Specifically, ozonation has received notable attention as a promising approach for degrading organic pollutants in wastewater. However, different groups of pollutants are hardly degradable via single ozonation. With continuous development, it has been shown that using engineered nanomaterials as nanocatalysts in catalytic ozonation can increase efficiency by turning this process into a low-selective AOP for pollutant degradation. Nanocatalysts promote ozone decomposition and form active free radicals responsible for increasing the degradation and mineralization of pollutants. This work reviews the performances of different nanomaterials as homogeneous and heterogeneous nanocatalysts in catalytic ozonation. This review focuses on applying metal- and carbon-based engineered nanomaterials as nanocatalysts in catalytic ozonation and on identifying the main future directions for using this type of AOP toward wastewater treatment.

A new copper(II) complex containing triclopyr: one-pot crystallization, structure, conformation and Hirshfeld surface analyses

A new copper(II) complex [Cu(3,5,6-tcpa)(2,2′-bipy)Cl] (1) has been obtained through the one-pot hydrothermal reaction of copper chloride dihydrate with triclopyr (systematic name 2-((3,5,6-trichloropyridin-2-yl)oxy)acetic acid, abbreviation 3,5,6-Htcpa) and 2,2′-bipyridine (2,2′-bipy) coligands. 1 has crystallized in triclinic crystal system, P 1 ‾ $\overline{1}$ space group. The central copper(II) ion displayed a distorted square–pyramidal geometry and was connected by one chlorido co-ligand (Clˉ), one 3,5,6-tcpa anionic chelator and one chelating 2,2’-bipy ligand to afford a mononuclear structure. 1 is further extended into a 3D network by the non-covalent interactions of H⋯Cl, H⋯O hydrogen bonds, aromatic π⋯π stacking together with Cl⋯Cl halogen bond interactions. The co-crystallization process, the crystal structure of 1 as well as the Hirshfeld surface analysis for 1 have been analyzed and described. In addition, the flexible conformation of phenoxy methylene group among 1, triclopyr acid and its previously reported co-crystallized compound also have been carefully compared and discussed.

The synthesis, crystal structure and conformation analysis of triclopyr ethyl ester

Triclopyr ethyl ester (1) has been co-synthesized through one-pot solvothermal reaction and the crystal structure has been determined by single crystal X-ray structure analysis. The compound C18H16Cl6N2O6 crystallizes in the monoclinic crystal system, P21/c space group with unit-cell parameters: a = 4.9615(2) Å, b = 30.9297(14) Å, c = 15.9155(10) Å, β = 91.466(4)° and Z = 4. Each unit cell is composed of two discrete, similar but reversely arranged triclopyr ethyl ester organic molecules. In the 3D packing plot, 1 is further assembled into a network structure via rich Cl⋯Cl halogen bond interactions. In addition, the crystal structure, the flexible conformation of phenoxy methylene group of 1 has been carefully compared and discussed with those of triclopyr acid.

Conductive polymer layered semiconductor for degradation of triclopyr acid and 2,4-dichlorophenoxyacetic acid from aqueous stream using coalesce adsorption-photocatalysis technique

Polyaniline supported titanium dioxide nanoparticles (PTs) were fabricated using chemical oxidative aniline polymerization in the presence of titanium dioxide with ammonium peroxydisulfate as an oxidant. The synthesized PTs were thoroughly characterized for their morphological and functional features. PTs were employed for the photodegradation of acidic herbicides; 2,4-dichlorophenoxyacetic acid (2,4-D) and triclopyr acid (TCP). PT's surface modifications were imparted and their herbicide removal efficiencies were compared. The best operating conditions for adsorption/photocatalysis were 0.5 g/L photocatalyst, 10 mg/L concentration of individual herbicides resulted in 90.72% removal of TCP at pH 4 and 99.91% removal of 2,4-D at pH 5. Adsorption kinetics of herbicides, onto PT-1 showed the equilibrium attainment within 30 min and experimental data obeyed pseudo-second order model for TCP and 2,4-D removal which was governed by chemisorption. Analysis of TCP and 2,4-D adsorption indicated that the removal followed Sips model for TCP removal while Redlich-Peterson model explained the removal of 2,4-D by PT-1. Rate constants indicated that the amount of TiO₂ in the PTs played an important role in removing the herbicides and PT-1 material excellent remarkable activity for three cycles of photodegradation. Thus, this work reports the polymerization of aniline onto TiO₂ and their utility as photocatalyst for the expulsion of 2,4-D and TCP from water.

Cyclohexane oxidation using advanced oxidation processes with metals and metal oxides as catalysts: a review

Selective oxidation of cyclohexane has gained substantial interest in the field of research due to the prominence of its products in industrial processes. Particularly, advanced oxidation processes (AOPs) constitute a positive technology for the oxidation of cyclohexane owing to their high oxidation potentials and environmental benign properties. This review entails to address the progress made in advanced oxidation of cyclohexane over nanostructured metals and metal oxides catalysts. The main focus is directed toward the photocatalysis, Fenton oxidation and ozonation as advanced oxidation processes. Mainly, the fundamental principles, prime factors of the AOPs in conjunction with metal and metal oxide catalysts and the mechanistic insight toward the oxidation of cyclohexane are highlighted. The affirmative effects of the metals and metal oxide catalysts mainly focusing on particle size, structure and elemental composition is stressed. Lastly, the advantages and disadvantages of the AOPs and the strategic approaches to counter the disadvantages are also clearly elucidated.

Trade-off control of organic matter and disinfection by-products in the drinking water treatment chain: Role of pre-ozonation

Ozone is a strong oxidant commonly used in drinking water treatment, but its role in the transformation/formation of organic matters (OMs) and disinfection by-products (DBPs) in the drinking water treatment chain had not been systematically studied. In this work the occurrence and building up of OMs, DBPs of trihalomethanes (THMs) and nitrosamines (NAs) during water purification steps under different pre-ozonation dosages have been studied through lab-scale and pilot-scale studies. Results indicated that 0-0.4 mg/L of pre-ozonation dosage could reduce organic load of following-up process steps but insufficient to control DBPs. Seasonal performances of a pilot plant indicated that the accumulation of DBPs was much less in summer than in winter. Furthermore the formation potential of NAs was higher in winter than summer when 0.4 mg/L pre-ozonation was dosed while the maximum removal efficiency of organic matter was found at a pre-ozonation dosage of 0.8 mg/L in summer. Finally a seasonal trade-off control strategy for both OMs and DBPs was proposed with an elucidated role of pre-ozonation in the drinking water treatment chain. This study provided working principles on optimizing pre-ozonation dosage and a seasonal control strategy for trade-off control of both OMs and DBPs in drinking water treatment plants.

Paraquat degradation by photocatalysis: experimental desing and optimization

This study describes the experimental design and optimization of application TiO₂ catalysts doped with 0.5, 1, 1.5, 2.0% of Fe. The catalysts were prepared using the impregnation method applied in Paraquat herbicide degradation. The catalysts were characterized by the following techniques: specific surface area and volume, mean pore diameter (BET method), scanning electron microscopy and photoacoustic spectroscopy. The characterization presented results indicating that both calcination temperature and the increase nominal metallic load affected by the structure of catalysts, changing the textural properties, as well as the band gap. The catalyst that presented the best herbicide removal percentage was TiO₂ calcined at 773 K with removal of 90.2%. However, according to the experimental design and optimization, both variables (calcination temperature and Fe percentage) are significant in the process. In addition, a positive effect was found in the interaction between the two variables. The values show that a third order kinetic model better described the Paraquat photocatalytic degradation.

Photoelectro-Fenton treatment of pesticide triclopyr at neutral pH using Fe(III)-EDDS under UVA light or sunlight

One of the main challenges of electrochemical Fenton-based processes is the treatment of organic pollutants at near-neutral pH. As a potential approach to this problem, this work addresses the use of a low content of soluble chelated metal catalyst, formed between Fe(III) and ethylenediamine-N,N'-disuccinic (EDDS) acid (1:1), to degrade the herbicide triclopyr in 0.050 M Na₂SO₄ solutions at pH 7.0 by photoelectro-Fenton with UVA light or sunlight (PEF and SPEF, respectively). Comparison with electro-Fenton treatments revealed the crucial role of the photo-Fenton-like reaction, since this promoted the production of soluble Fe(II) that enhanced the pesticide removal. Hydroxyl radicals formed at the anode surface and in the bulk were the main oxidants. A boron-doped diamond (BDD) anode yielded a greater mineralization than an IrO₂-based one, at the expense of reduced cost-effectiveness. The effect of catalyst concentration and current density on the performance of PEF with BDD was examined. The PEF trials in 0.25 mM Na₂SO₄ + 0.35 mM NaCl medium showed a large influence of generated active chlorine as oxidant, being IrO₂ more suitable than RuO₂ and BDD. In SPEF with BDD, the higher light intensity from solar photons accelerated the removal of the catalyst and triclopyr, with small effect on mineralization. A plausible route for the herbicide degradation by Fe(III)-EDDS-catalyzed PEF and SPEF is finally proposed based on detected byproducts: three heteroaromatic and four linear N-aliphatic compounds, formamide, and tartronic and oxamic acids.

Degradation of nitrogen-containing hazardous compounds using advanced oxidation processes: A review on aliphatic and aromatic amines, dyes, and pesticides

Nitrogen-containing amino and azo compounds are widely used in textile, agricultural and chemical industries. Most of these compounds have been demonstrated to be resistant to conventional degradation processes. Advanced oxidation processes can be effective to mineralize nitrogen-containing compounds and improve the efficacy of overall treatment schemes. Due to a global concern for the occurrence of toxic and hazardous amino-compounds and their harmful degradation products in water, it is important to develop technologies that focus on all the aspects of their degradation. Our focus is to present a state-of-the-art review on the degradation of several amine- and azo-based compounds using advanced oxidation processes. The categories reviewed are aromatic amines, aliphatic amines, N-containing dyes and N-containing pesticides. Data has been compiled for degradation efficiencies of each process, reaction mechanisms focusing on specific attack of oxidants on N atoms, the effect of process parameters like pH, initial concentration, time of treatment, etc. and identification of intermediates. Several AOPs have been compared to provide a systematic overview of available literature that will drive essential aspects of future research on amine-based compounds. Ozone is observed to be highly reactive to most amines, dyes and pesticides, followed by Fenton processes. Degradation of amines is highly sensitive to pH and mechanisms differ at different pH values. Cavitation is a promising alternative pre-treatment method for cost reduction. Hybrid methods under optimized conditions are demonstrated to give synergistic effects and must be tailored for specific effluents in question. In conclusion, even though nitrogen-containing compounds are recalcitrant in nature, the use of advanced oxidation processes at carefully established optimum conditions can yield highly efficient degradation of the compounds.

Present applications of titanium dioxide for the photocatalytic removal of pollutants from water: A review

The evolution of modern technology and industrial processes has been accompanied by an increase in the utilization of chemicals to derive new products. Water bodies are frequently contaminated by the presence of conventional pollutants such as dyes and heavy metals, as well as microorganisms that are responsible for various diseases. A sharp rise has also been observed in the presence of new compounds heretofore excluded from the design and evaluation of wastewater treatment processes, categorized as "emerging pollutants". While some are harmless, certain emerging pollutants possess the ability to cause debilitating effects on a wide spectrum of living organisms. Photocatalytic degradation has emerged as an increasingly popular solution to the problem of water pollution due to its effectiveness and versatility. The primary objective of this study is to thoroughly scrutinize recent applications of titanium dioxide and its modified forms as photocatalytic materials in the removal and control of several classes of water pollutants as reported in literature. Different structural modifications are used to enhance the performance of the photocatalyst such as doping and formation of composites. The principles of these modifications have been scrutinized and evaluated in this review in order to present their advantages and drawbacks. The mechanisms involved in the removal of different pollutants through photocatalysis performed by TiO2 have been highlighted. The factors affecting the mechanism of photocatalysis and those affecting the performance of different TiO2-based photocatalysts have also been thoroughly discussed, thereby presenting a comprehensive view of all aspects involved in the application of TiO₂ to remediate and control water pollution.

Ozone facilitated degradation of caffeine using Ce-TiO2 catalyst

The ozone initiated oxidation of 1,3,7-trimethylxanthine (caffeine), commonly found in wastewaters as model compound is reported using cerium (Ce)/titanium dioxide (TiO₂) as catalyst. The effect of pH and loading of ceria on titania were investigated. Effect of reaction conditions on degradation of caffeine based on their pseudo first-order rate constants were compared. The combination of catalyst Ce-TiO₂ and ozone aeration significantly enhanced the degradation of caffeine compared to uncatalysed ozonation. The oxidation of caffeine ensued via the free radical mechanism, through enhanced ozone decomposition into OH radicals. Ce/TiO₂(0.5 wt%) showed good activity in degradation of caffeine at pH 6, in both natural stream and river water samples showing about 60% total organic carbon removal in 2 h ozonation period. Using liquid chromatography-mass spectroscopy, degradation products were analysed. A reaction intermediate and one final product were positively identified. Nano-catalysts with different loadings of Ce on TiO₂ synthesized by sol-gel route were characterized by scanning electron microscope, transmission electron microscopy, BET and powder X-ray diffraction spectrum techniques. The results showed that the material retained a highly ordered mesoporous structure and possessed large surface area.

How useful are geochemical and mineralogical indicators in assessing trace metal contamination and bioavailability in a post-restoration Mediterranean lagoon?

Tunis's Lake North (LNT), located on the Mediterranean Sea, and Tunisia's most important lagoon due to its economic value and its strategic position within the city, has recently undergone a vast sanitation project. To study the lagoon's level of metal pollution, three sediment cores were taken and the sediments were analyzed for trace and major elements, acid volatile sulfides (AVS), total organic carbon (TOC), and minerals. Results showed that TOC concentrations (0.2-3.1%) decreased following the lagoon's restoration. In addition, in comparison to historical data, concentrations of Cu (16-69.5 μg g^-1), Zn (60.6-191.4 μg g^-1), and Pb (13-100.9 μg g^-1) also decreased. Enrichment factor calculation with respect to the crust and local background showed that the sediment had long been contaminated by human pollution and especially by Pb, Zn, and Cu. The AVS to simultaneously extracted metal (SEM) ratio revealed values generally less than 1 indicating no sediment toxicity risks. Statistics revealed a detrital origin for certain metals and a diagenetic origin for FeS₂ and carbonate minerals.

Distribution and assessment of heavy metal toxicity in sediment cores from Bizerte Lagoon, Tunisia

To examine the state of pollution of Bizerte Lagoon which is exposed to intense anthropogenic pressure, two sediment cores were taken at two sites, one undergoes the dual effects of both marine waters arriving from the Mediterranean Sea through the Channel, and also of freshwater from the Tinja River; the other core is located at the center of the lagoon where water depth is maximal (12 m). Heavy metal concentrations in the two cores were assessed, with calculated enrichment factors and geo-accumulation indexes. Core sediments were also studied for chemical speciation and their monosulfide contents were measured. Results from enrichment factors and geo-accumulation indexes show an accumulation of Cd, Zn, Cr, and Pb, while chemical speciation revealed a risk only from Cd and Mn. Comparison of sequential extraction values with those of acid volatile sulfides revealed that non-toxic effects may be caused by any of the studied metals in the sediment.