Design and characterization of calcium-free in-situ gel formulation based on sodium alginate and chitosan

Formulation and rheological evaluation of liposomes-loaded carbopol hydrogels based on thermal waters

The aims of this study were to develop topical liposomal hydrogels based on thermal waters (TWs) acquired in the region of Biskra (Northeast Algeria) and also to investigate their rheological properties. Liposomes containing two highly mineralized thermal waters, Baraka (BTW) and Salhine (STW), were prepared by probe sonication using phosphatidylcholine (PC) and cholesterol (Chol), plain or mixed with phosphatidylglycerol (PG). Based on their lipid composition, obtained liposomes presented vesicle sizes of 60 nm, a low polydispersity index, and various negative zeta potentials. It was noted that with increasing counterions charge in TWs the zeta potential of liposomes decreased toward neutral values.Carbopol (1%, w/w) hydrogels prepared with BTW, STW, and also demineralized water (placebo hydrogel) showed a non-Newtonian behavior, pseudoplastic fluid adjusted to Carreau model. The composition of thermal waters influenced highly the rheological properties of Carbopol hydrogels. Liposomal hydrogels were prepared by dispersing liposomes in hydrogels formulated with the same encapsulated thermal water. Regardless of composition or lipid concentration of added liposomes, the viscosity and viscoelastic parameters of Carbopol hydrogels changed negligibly. Indeed, liposome composition and lipid concentration seemed to have no effect on the rheological properties of Carbopol hydrogel in the presence of an important charge of cations. Hence, hydrogels and liposomal hydrogels based on thermal waters had suitable rheological properties for topical application and delivery of minerals in the skin.

Microwave-Assisted Physically Cross-Linked Chitosan-Sodium Alginate Hydrogel Membrane Doped with Curcumin as a Novel Wound Healing Platform

This project purposes to develop chitosan and sodium alginate-based hydrogel membranes loaded with curcumin through microwave-based physical cross-linking technique and its evaluation for wound healing potential. For the purpose, curcumin-loaded chitosan and sodium alginate membranes were developed using microwave at fixed frequency of 2450 MHz, power 350 W for 60 s, and tested for their physicochemical attributes like swelling, erosion, surface morphology, drug content, and in vitro drug release. The membranes were also subjected to tensile strength and vibrational and thermal analysis followed by testing in vivo on animals. The results indicated that microwave treatment significantly enhanced the swelling ability, reduced the erosion, and ensured smooth surface texture with optimal drug content. The drug was released in a slow fashion releasing total of 41 ± 4.2% within 24-h period with a higher tensile strength of 16.4 ± 5.3 Mpa. The vibrational analysis results revealed significant fluidization of hydrophilic domains and defluidization of hydrophobic domains which translated into a significant rise in the melting temperature and corresponding enthalpy which were found to be 285.2 ± 3.2 °C and 4.89 ± 1.4 J/g. The in vivo testing revealed higher percent re-epithelialization (75 ± 2.3%) within 14 days of the treatment application in comparison to only gauze and other treatments applied, with higher extent of collagen deposition having well-defined epidermis and stratum corneum formation. The microwave-treated chitosan-sodium alginate hydrogel membranes loaded with curcumin may prove to be another alternative to treat skin injuries. Graphical Abstract.

Promising Polymeric Drug Carriers for Local Delivery: The Case of in situ Gels

BACKGROUND

At present, the controlled local drug delivery is a very promising approach compared to systemic administration, since it mostly targets the affected tissue. In fact, various drug carriers for local delivery have been prepared with improved therapeutic efficacy.

OBJECTIVE

in situ polymer gels are drug delivery systems that not only present liquid characteristics before their administration in body, but once they are administered, form gels due to gelation. Their gelation mechanism is due to factors such as pH alteration, temperature change, ion activation or ultraviolet irradiation. in situ gels offer various advantages compared to conventional formulations due to their ability to release drugs in a sustainable and controllable manner. Most importantly, in situ gels can be used in local drug delivery applications for various diseases.

METHODS

This review includes the basic knowledge and theory of in situ gels as well as their various applications according to their administration route.

RESULTS

Various natural, semisynthetic, and synthetic polymers can produce in situ polymeric gels. For example, natural polysaccharides such as alginic acid, chitosan, gellan gum, carrageenan etc. have been utilized as in situ gels for topical delivery. Besides the polysaccharides, poloxamers, poly(Nisopropylacrylamide), poly(ethyleneoxide)/ (lactic-co-glycolic acid), and thermosensitive liposome systems can be applied as in situ gels. In most cases, in situ polymeric gels could be applied via various administration routes such as oral, vaginal, ocular, intranasal and injectable.

CONCLUSION

To conclude, it can be revealed that in situ gels could be a promising alternative carrier for both chronic and immediate diseases.

Implementation and in vitro characterization of calcium-free in situ gelling oral reconstituted suspension for potential overweight treatment

In this work, oral granules that were easily dissolved in aqueous dispersion, were prepared. These oral suspensions were formulated with sodium alginate (AlgNa), chitosan (CHI) and sodium carboxymethylcellulose (CMC Na). The gels were formulated by pouring the suspensions into 150 ml of simulated gastric fluid (SGF) pH 1.2 at 37° C. The in-situ gelling mechanism was based on the ionization states of the three biopolymers as a function of the pH of the medium. Fourier transform infrared analysis of gels confirmed the interactions between alginate and chitosan. According to the scanning electron microscopy analysis, the gels were characterized by a firm and homogeneous structure. The obtained values of the elastic storage modulus, G', varied between 10 1   and 10 7 Pa. The eliminated volume of the unabsorbed liquid by the gels fluctuated between 25% and 55% of the total liquid volume. The quality of the gels was improved when a maximum concentration of alginate ( 4   g / 100   ml ) , a minimum concentration of chitosan ( 0.5   g / 100   ml ) and a maximum amount of carboxymethylcellulose ( 4   g / 100   ml ) were used. The value of their elastic modulus, G' was around 10 5 Pa and the residual unabsorbed volume of the liquid was 25% of the total liquid volume. According to the obtained results, the prepared gels could induce a feeling of fullness by stimulating the gastric distension and they could potentially be applied as anti-obesity medication.

Exploring the Protective Potential of Carboxymethyl Terminalia catappa Polysaccharide on Blue Light Light-Emitting Diode Induced Corneal Damage

BACKGROUND

Excessive blue light light-emitting diode (LED) exposure and consequent oxidative stress causes corneal damage and corneal injuries are the major problem arising these days due to excessive use of mobile phone, TV, environment pollution, etc. Objective: In the present investigation, the protectiveness of carboxymethyl Terminalia catappa (CTC) from blue light LED-induced corneal damage was explored.

METHODS

For this purpose, Terminalia catappa (TC) was functionalized by carboxymethylation and its structural modification was confirmed by spectral attributes. Further, the CTC protective eye drop formulations (0.025-1%, w/v) were prepared and evaluated for their capability of protection from blue light LEDinduced corneal damage as compared to CTC protective eye gel (1.25-7%, w/v). The findings pointed towards excellent protection of CTC gel formulations as compared to CTC eye drop formulations. In addition, the prepared optimized CTC gel had thixotropic behavior as evident from percentage structural recovery which was 1.75 fold higher than marketed formulation (I-Comfort, HPMC 2%, w/v). The safety and non-toxicity of CTC protective eye drop and gel were confirmed by HET-CAM test. Further, a rat eye model was implemented that mimic blue light light-emitting diode induced corneal damage in day to day life to assess the protective effect of CTC protective eye drop and gel.

RESULTS

The order of protectiveness of CTC formulations was found to be CTC protective eye gel (4%, w/v) (no corneal damage)>marketed eye gel (12.34% corneal damage)=CTC protective eye drop (0.75%, w/v) (17.48% corneal damage)> marketed eye drop (51% corneal damage). The mechanism behind the protective effect of CTC eye drop and gel was associated with good free radical scavenging activity and corneal adhesive property of CTC. It is established from the present work that, carboxymethyl Terminalia catappa has protective action against blue light light-emitting diode induced corneal damage.

In situ synthesis of core-shell carbon nanowires as a potent targeted anticoagulant

We have developed a one-pot synthesis of bio-carbon nanowires from the natural product sodium alginate at low temperature, without using any catalyst, for anticoagulation applications. Sodium alginate is carbonized and sulfated/sulfonated in situ by solid state heating of a mixture of sodium alginate and ammonium sulfite. By regulating the heating temperature and the ratio of ammonium sulfite to sodium alginate, we modulated the degree of sulfation/sulfonation and carbonization, as well as the morphology of the carbon nanomaterials. The core-shell sulfated/sulfonated bio-carbon nanowires (CNWs_Alg@SOx) made by the reaction of a mixture of ammonium sulfite and sodium alginate with a mass ratio of 5 (ammonium sulfite to sodium alginate) at 165 °C for 3 h, exhibit strong inhibition of thrombin activity due to their ultrahigh binding affinity towards it (dissociation constant (K_d) = 8.7 × 10^-11 M). The possible formation mechanism of the carbon nanowires has been proposed. The thrombin-clotting time delay caused by CNWs_Alg@SOx is ∼ 170 times longer than that caused by sodium alginate. Hemolysis and cytotoxicity assays demonstrated the high biocompatibility of CNWs_Alg@SOx. Furthermore, the thromboelastography of whole-blood coagulation and rat-tail bleeding assays further reveal that CNWs_Alg@SOx have a much stronger anticoagulation activity than sodium alginate and naturally sulfated polysaccharides (e.g., fucoidan). Our results suggest that the low-temperature prepared, cost-effective, and highly biocompatible CNWs_Alg@SOx show great potential as an efficient anticoagulant for the prevention and treatment of diseases associated with thrombosis.

Recent progress in preparation and agricultural application of microcapsules

Recent advances in life science technology have prompted the need to develop microcapsule delivery systems that can encapsulate many different functional or active materials such as drugs, peptides, and live cells, etc. The encapsulation technology is now commonly used in medicine, agriculture, food, and other many fields. The application of biodegradable microcapsule systems can not only effectively prevent the degradation of core materials in the body or the biological environment, but also improve the bioavailability, control the release and prolong the halftime or storage of core active materials. Various wall materials, preparation methods, encapsulation processes, and release mechanisms are covered in this review, as well as several main factors including pH values, temperatures, particle sizes, and additives, which can strongly influence the encapsulation efficiency, the strength, and release of microcapsules. The improvement of coating materials, preparation techniques, and challenges are also highlighted, as well as application prospects.

Chitosan-Based In Situ Gels for Ocular Delivery of Therapeutics: A State-of-the-Art Review

Ocular in situ gels are a promising alternative to overcome drawbacks of conventional eye drops because they associate the advantages of solutions such as accuracy and reproducibility of dosing, or ease of administration with prolonged contact time of ointments. Chitosan is a natural polymer suitable for use in ophthalmic formulations due to its biocompatibility, biodegradability, mucoadhesive character, antibacterial and antifungal properties, permeation enhancement and corneal wound healing effects. The combination of chitosan, pH-sensitive polymer, with other stimuli-responsive polymers leads to increased mechanical strength of formulations and an improved therapeutic effect due to prolonged ocular contact time. This review describes in situ gelling systems resulting from the association of chitosan with various stimuli-responsive polymers with emphasis on the mechanism of gel formation and application in ophthalmology. It also comprises the main techniques for evaluation of chitosan in situ gels, along with requirements of safety and ocular tolerability.