A current approach to the control of filamentous fungal growth in media: microparticle enhanced cultivation technique

Morphological-metabolic analysis in Streptomyces rimosus microparticle-enhanced cultivations (MPEC)

Streptomyces produce a broad spectrum of biologically active molecules such as oxytetracycline and rimocidin, which are widely used in human and animal treatments. microparticle-enhanced cultivation (MPEC) is one of the tools used for Streptomyces bioprocesses intensification by the control of mycelial morphology. In the present work, morphological changes of Streptomyces rimosus caused by the addition of 10 µm talc microparticles in MPEC were correlated with the biosynthetic activity of the microorganism. Comparing the runs with and without microparticles, major morphological changes were observed in MPEC, including the deformation of pellets, variation of their size, appearance of hyphae and clumps as well as the aggregation of mycelial objects. The presence of talc microparticles also influenced the levels of the studied secondary metabolites produced by S. rimosus. Comparing control and MPEC runs, the addition of talc microparticles increased the amounts of oxytetracycline (9-fold), 2-acetyl-2-decarboxamido-oxytetracycline (7-fold), milbemycin A3+4[O] (3-fold) and CE 108 (1.5-fold), while rimocidin (27-ethyl) and milbemycin β11+4[O] production was reduced. In summary, the addition of talc microparticles to S. rimosus cultivations led to the development of smaller morphological forms like hyphae and clumps as well as to the changes in the amounts of secondary metabolites.

Microplastic influences the ménage à trois among the plant, a fungal pathogen, and a plant growth-promoting fungal species

Microplastics (MP) can influence a plethora of fungal species within the rhizosphere. Nevertheless, there are few studies on the direct impacts of MPs on soil fungi and their intricate interplay with plants. Here, we investigated the impact of polyethylene microspheres (PEMS) on the ecological interactions between Fusarium solani, a plant pathogenic fungus, and Trichoderma viride, a fungal plant growth promotor, within the rhizosphere of Solanum lycopersicum (tomato). Spores of F. solani and T. viride were pre-incubated with PEMS at two concentrations, 100 and 1000 mg L-1. Mycelium growth, sporulation, spore germination, and elongation were evaluated. Tomato seeds were exposed to fungal spore suspensions treated with PEMS, and plant development was subsequently assessed after 4 days. The results showed that PEMS significantly enhanced the sporulation (106.0 % and 70.1 %) but compromised the spore germination (up to 27.3 % and 32.2 %) and radial growth (up to -5.2% and -21.7 %) of F. solani and T. viride, respectively. Furthermore, the 100 and 1000 mg L-1 concentrations of PEMS significantly (p<0.05) enhanced the mycelium density of T. viride (9.74 % and 22.30 %, respectively), and impaired the germ-tube elongation of F. solani after 4 h (16.16 % and 11.85 %, respectively) and 8 h (4 % and 17.10 %, respectively). In addition, PEMS amplified the pathogenicity of F. solani and boosted the bio-enhancement effect of T. viride on tomato root growth. Further, PEMS enhanced the bio-fungicidal effect of T. viride toward F. solani (p<0.05). In summary, PEMS had varying effects on F. solani and T. viride, impacting their interactions and influencing their relationship with tomato plants. It intensified the beneficial effects of T. viride and increased the aggressiveness of F. solani. This study highlights concerns regarding the effects of MPs on fungal interactions in the rhizosphere, which are essential for crop soil colonization and resource utilization.

Grifola frondosa polysaccharides: A review on structure/activity, biosynthesis and engineering strategies

Polysaccharides are the main polymers in edible fungi Grifola frondosa, playing a crucial role in the physiology and representing the healthy benefits for humans. Recent efforts have well elucidated the fine structures and biological functions of G. frondosa polysaccharides. The recently-rapid developments and increasing availability in fungal genomes also accelerated the better understanding of key genes and pathways involved in biosynthesis of G. frondosa polysaccharides. Herein, we provide a brief overview of G. frondosa polysaccharides and their activities, and comprehensively outline the complex process, genes and proteins corresponding to G. frondosa polysaccharide biosynthesis. The regulation strategies including strain improvement, process optimization and genetic engineering were also summarized for maximum production of G. frondosa polysaccharides. Some remaining unanswered questions in describing the fine synthesis machinery were also pointed out to open up new avenues for answering the structure-activity relationship and improving polysaccharide biosynthesis in G. frondosa. The review hopefully presents a reasonable full picture of activities, biosynthesis, and production regulation of polysaccharide in G. frondosa.

Enhancing Monascus Pellet Formation for Improved Secondary Metabolite Production

Filamentous fungi are well-known for their ability to form mycelial pellets during submerged cultures, a characteristic that has been extensively studied and applied. However, Monascus, a filamentous saprophytic fungus with a rich history of medicinal and culinary applications, has not been widely documented for pellet formation. This study aimed to investigate the factors influencing pellet formation in Monascus and their impact on citrinin production, a key secondary metabolite. Through systematic exploration, we identified pH and inoculum size as critical factors governing pellet formation. Monascus exhibited optimal pellet growth within the acidic pH range from 5 to 6, resulting in smaller, more homogeneous pellets with lower citrinin content. Additionally, we found that inoculum size played a vital role, with lower spore concentrations favoring the formation of small, uniformly distributed pellets. The choice of carbon and nitrogen sources also influenced pellet stability, with glucose, peptone, and fishmeal supporting stable pellet formation. Notably, citrinin content was closely linked to pellet diameter, with larger pellets exhibiting higher citrinin levels. Our findings shed light on optimizing Monascus pellet formation for enhanced citrinin production and provide valuable insights into the cultivation of this fungus for various industrial applications. Further research is warranted to elucidate the molecular mechanisms underlying these observations.

Genome-guided approaches and evaluation of the strategies to influence bioprocessing assisted morphological engineering of Streptomyces cell factories

Streptomyces genera serve as adaptable cell factories for secondary metabolites with various and distinctive chemical structures that are relevant to the pharmaceutical industry. Streptomyces' complex life cycle necessitated a variety of tactics to enhance metabolite production. Identification of metabolic pathways, secondary metabolite clusters, and their controls have all been accomplished using genomic methods. Besides this, bioprocess parameters were also optimized for the regulation of morphology. Kinase families were identified as key checkpoints in the metabolic manipulation (DivIVA, Scy, FilP, matAB, and AfsK) and morphology engineering of Streptomyces. This review illustrates the role of different physiological variables during fermentation in the bioeconomy coupled with genome-based molecular characterization of biomolecules responsible for secondary metabolite production at different developmental stages of the Streptomyces life cycle.

Gibberellic acid overproduction in Fusarium fujikuroi using regulatory modification and transcription analysis

Gibberellic acid (GA₃), one of the natural diterpenoids produced by Fusarium fujikuroi, serves as an important phytohormone in agriculture for promoting plant growth. Presently, the metabolic engineering strategies for increasing the production of GA₃ are progressing slowly, which seriously restricted the advancing of the cost-effective industrial production of GA₃. In this study, an industrial strain with high-yield GA₃ of F. fujikuroi was constructed by metabolic modification, coupling with transcriptome analysis and promoter engineering. The over-expression of AreA and Lae1, two positive factors in the regulatory network, generated an initial producing strain with GA₃ production of 2.78 g L^-1. Compared with a large abundance of transcript enrichments in the GA₃ synthetic gene cluster discovered by the comparative transcriptome analysis, geranylgeranyl pyrophosphate synthase 2 (Ggs2), and cytochrome P450-3 genes, two key genes that respectively participated in the initial and final step of biosynthesis, were identified to be downregulated when the highest GA₃ productivity was obtained. Employing with a nitrogen-responsive bidirectional promoter, the two rate-limiting genes were dynamically upregulated, and therefore, the production of GA₃ was increased to 3.02 g L^-1. Furthermore, the top 20 upregulated genes were characterized in GA₃ over-production, and their distributions in chromosomes suggested potential genomic regions with a high transcriptional level for further strain development. The construction of a GA₃ high-yield-producing strain was successfully achieved, and insights into the enriched functional transcripts provided novel strain development targets of F. fujikuroi, offering an efficient microbial development platform for industrial GA₃ production. KEY POINTS: • Global regulatory modification was achieved in F. fujikuroi for GA₃ overproduction. • Comparative transcriptome analysis revealed bottlenecks in GA specific-pathway. • A dynamically nitrogen-regulated bidirectional promoter was cloned and employed.

Efficient production of Antrodin C by microparticle-enhanced cultivation of medicinal mushroom Antrodia cinnamomea

The microparticle-enhanced cultivation (MPEC) was used to enhance the production of Antrodin C by submerged fermentation of medicinal mushroom Antrodia cinnamomea. The crucial factors such as types, sizes, concentrations, and addition time of microparticles were optimized. The mechanism of MPEC on the membrane permeability and fluidity of A. cinnamomea and the expression of key genes in Antrodin C were investigated. When talc (18 μm, 2 g/L) was added into the fermentation liquid at 0 h, the promoting effect on Antrodin C was the best. The maximum yield of Antrodin C was 1615.7 mg/L, which was about 2.98 times of the control (541.7 mg/L). Talc slightly damaged the mycelia of A. cinnamomea, increased the release of intracellular constituents, and enhanced the index of unsaturated fatty acid. In addition, the key genes (IDI, E2.3.3.10, HMGCR, atoB) that might play an important role in the synthesis of the triquine-type sesquiterpene Antrodin C, were upregulated. In conclusion, talc increased the permeability and fluidity of cell membrane, upregulated the key genes and improved the biosynthesis process to enhance the yield of Antrodin C in the submerged fermentation of A. cinnamomea.

Effect of Microparticles on Fungal Fermentation for Fermentation-Based Product Productions

Ranging from simple food ingredients to complex pharmaceuticals, value-added products via microbial fermentation have many advantages over their chemically synthesized alternatives. Some of such advantages are environment-friendly production pathways, more specificity in the case of enzymes as compared to the chemical catalysts and reduction of harmful chemicals, such as heavy metals or strong acids and bases. Fungal fermentation systems include yeast and filamentous fungal cells based on cell morphology and culture conditions. However, filamentous fungal fermentation has gained attention in the past few decades because of the diversity of microbial products and robust production of some of the most value-added commodities. This type of fungal fermentation is usually carried out by solid-state fermentation. However, solid-state fermentation poses problems during the scale-up for industrial production. Therefore, submerged fermentation for value-added products is usually preferred for scaling-up purposes. The main problem with submerged fungal fermentation is the formation of complex mycelial clumps or pellets. The formation of such pellets increases the viscosity of the media and hinders the efficient transfer of oxygen and nutrient resources in the liquid phase. The cells at the center of the clump or pellet start to die because of a shortage of resources and, thus, productivity decreases substantially. To overcome this problem, various morphological engineering techniques are being researched. One approach is the use of microparticles. Microparticles are inert particles with various size ranges that are used in fermentation. These microparticles are shown to have positive effects, such as high enzyme productivity or smaller pellets with fungal fermentation. Therefore, this review provides a background about the types of microparticles and summarizes some of the recent studies with special emphasis on the fungal morphology changes and microparticle types along with the applications of microparticles in filamentous fungal fermentations.

Co-cultivation of filamentous microorganisms in the presence of aluminum oxide microparticles

Abstract

In the present work, the approaches of submerged co-cultivation and microparticle-enhanced cultivation (MPEC) were combined and evaluated over the course of three case studies. The filamentous fungus Aspergillus terreus was co-cultivated with Penicillium rubens, Streptomyces rimosus, or Cerrena unicolor in shake flasks with or without the addition of aluminum oxide microparticles. The influence of microparticles on the production of lovastatin, penicillin G, oxytetracycline, and laccase in co-cultures was compared with the effects recorded for the corresponding monocultures. In addition, the quantitative analyses of morphological parameters, sugars consumption, and by-products formation were performed. The study demonstrated that the influence of microparticles on the production of a given molecule in mono- and co-culture may differ considerably, e.g., the biosynthesis of oxytetracycline was shown to be inhibited due to the presence of aluminum oxide in “A. terreus vs. S. rimosus” co-cultivation variants but not in S. rimosus monocultures. The differences were also observed regarding the morphological characteristics, e.g., the microparticles-induced changes of projected area in the co-cultures and the corresponding monocultures were not always comparable. In addition, the study showed the importance of medium composition on the outcomes of MPEC, as exemplified by lovastatin production in A. terreus monocultures. Finally, the co-cultures of A. terreus with a white-rot fungus C. unicolor were described here for the first time.

Key points

• Aluminum oxide affects secondary metabolites production in submerged co-cultures.

• Mono- and co-cultures are differently impacted by the addition of aluminum oxide.

• Effect of aluminum oxide on metabolites production depends on medium composition.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-022-12087-7.

Improved Foods Using Enzymes from Basidiomycetes

Within the kingdom of fungi, the division Basidiomycota represents more than 30,000 species, some with huge genomes indicating great metabolic potential. The fruiting bodies of many basidiomycetes are appreciated as food (“mushrooms”). Solid-state and submerged cultivation processes have been established for many species. Specifically, xylophilic fungi secrete numerous enzymes but also form smaller metabolites along unique pathways; both groups of compounds may be of interest to the food processing industry. To stimulate further research and not aim at comprehensiveness in the broad field, this review describes some recent progress in fermentation processes and the knowledge of fungal genetics. Processes with potential for food applications based on lipases, esterases, glycosidases, peptidases and oxidoreductases are presented. The formation and degradation of colourants, the degradation of harmful food components, the formation of food ingredients and particularly of volatile and non-volatile flavours serve as examples. In summary, edible basidiomycetes are foods—and catalysts—for food applications and rich donors of genes to construct heterologous cell factories for fermentation processes. Options arise to support the worldwide trend toward greener, more eco-friendly and sustainable processes.

Recent advances in the development of Aspergillus for protein production

Aspergillus had been widely used in the industrial production of recombinant proteins. In addition to the safety and broad substrate utilization spectrum, its efficient post-translational modification and strong protein secretion capacity have significant advantages for developing an excellent protein-producing cell factory in industrial production. However, the difficulties in genetic manipulation of Aspergillus and varying expression levels of different heterologous proteins hampered its further development and application. Recently, the development of CRISPR genome editing and high-throughput screening platforms has facilitated the Aspergillus development of a wide range of modifications and applications. Meanwhile, multi-omics analysis and multiplexed genetic engineering have promoted effective knowledge mining. This paper provides a comprehensive and updated review of these advances, including high-throughput screening, genome editing, protein expression modules, and fermentation optimization. It also highlights and discusses the latest significant progress, aiming to provide a practical guide for implementing Aspergillus as an efficient protein-producing cell factory.

Enhancement of polysaccharides production using microparticle enhanced technology by Paraisaria dubia

Background

Polysaccharides are important active ingredients in Ophiocordyceps gracilis with many physiological functions. It can be obtained from the submerged fermentation by the anamorph (Paraisaria dubia) of Ophiocordyceps gracilis. However, it was found that the mycelial pellets of Paraisaria dubia were dense and increased in volume in the process of fermentation, and the center of the pellets was autolysis due to the lack of nutrient delivery, which extremely reduced the yield of polysaccharides. Therefore, it is necessary to excavate a fermentation strategy based on morphological regulation for Paraisaria dubia to promote polysaccharides accumulation.

Results

In this study, we developed a method for enhancing polysaccharides production by Paraisaria dubia using microparticle enhanced technology, talc microparticle as morphological inducer, and investigated the enhancement mechanisms by transcriptomics. The optimal size and dose of talc were found to be 2000 mesh and 15 g/L, which resulted in a high polysaccharides yield. It was found that the efficient synthesis of polysaccharides requires an appropriate mycelial morphology through morphological analysis of mycelial pellets. And, the polysaccharides synthesis was found to mainly rely on the ABC transporter-dependent pathway revealed by transcriptomics. This method was also showed excellent robustness in 5-L bioreactor, the maximum yields of intracellular polysaccharide and exopolysaccharides were 83.23 ± 1.4 and 518.50 ± 4.1 mg/L, respectively. And, the fermented polysaccharides were stable and showed excellent biological activity.

Conclusions

This study provides a feasible strategy for the efficient preparation of cordyceps polysaccharides via submerged fermentation with talc microparticles, which may also be applicable to similar macrofungi.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01733-w.

Transcriptomic Analysis of Morphology Regulatory Mechanisms of Microparticles to Paraisaria dubia in Submerged Fermentation

Liquid submerged fermentation is an effective strategy to achieve large-scale production of active ingredients by macrofungi, and controlling mycelium morphology is a key factor restricting the development of this technology. Mining for superior morphological regulatory factors and elucidation of their regulatory mechanisms are vital for the further development of macrofungal fermentation technology. In this study, microparticles were used to control the morphology of Paraisaria dubia (P. dubia) in submerged fermentation, and the underlying regulatory mechanisms were revealed by transcriptomic. The relative frequency of S-type pellet diameter increased significantly from 7.14 to 88.31%, and biomass increased 1.54 times when 15 g/L talc was added. Transcriptome analysis showed that the morphological regulation of filamentous fungi was a complex biological process, which involved signal transduction, mycelium polar growth, cell wall synthesis and cell division, etc. It also showed a positive impact on the basic and secondary metabolism of P. dubia. We provided a theoretical basis for controlling the mycelium morphology of P. dubia in submerged fermentation, which will promote the development of macrofungal fermentation technology.

Insights on sustainable approaches for production and applications of value added products

The increasing demand for the development of sustainable strategies to utilize and process agro-industrial residues paves new paths for exploring innovative approaches in this area. Biotechnology based microbial transformations provide efficient, low cost and sustainable approaches for the production of value added products. The use of organic rich residues opens new avenues for the production of enzymes, pigments, biofuels, bioactive compounds, biopolymers etc. with vast industrial and therapeutic applications. Innovative technologies like strain improvement, enzyme immobilization, genome editing, morphological engineering, ultrasound/supercritical fluid/pulse electric field extraction, etc. can be employed. These will be helpful in achieving significant improvement in qualitative and quantitative parameters of the finished products. The global trend for the valorisation of biowaste has boosted the commercialization of these products which has transformed the markets by providing new investment opportunities. The upstream processing of raw materials using microbes poses a limitation in terms of product development and recovery which can be overcome by modifying the bioreactor design, physiological parameters or employing alternate technologies which will be discussed in this review. The other problems related to the processes include product stability, industrial applicability and cost competitiveness which needs to be addressed. This review comprehensively discusses the recent progress, avenues and challenges in the approaches aimed at valorisation of agro-industrial wastes along with possible opportunities in the bioeconomy.

Mucoromycota fungi as powerful cell factories for modern biorefinery

Biorefinery employing fungi can be a strategy for valorizing low-cost rest materials, by-products and wastes into several valuable bioproducts through the fungal fermentation. Mucoromycota fungi are soil fungi with a highly versatile metabolic system that positions them as powerful microbial cell factories for biorefinery applications. Lipids, pigments, chitin/chitosan, polyphosphates, ethanol, organic acids and enzymes are main Mucoromycota products that can be refined from the fermentation process and applied in nutrition, chemical or biofuel industries. In addition, Mucoromycota biomass can be used as it is for specific purposes, such as feed. Mucoromycota fungi can be employed in developing co-production processes, whereby several intra- and extracellular products are simultaneously formed in a single fermentation process, and, thus, economic viability of the process can be improved. This mini review provides a comprehensive overview over the recent advances in the production of valuable metabolites by Mucoromycota fungi and fermentation strategies which could be potentially applied in the industrial biorefinery settings. KEY POINTS: • Biorefineries utilizing Mucoromycota fungi as production cell factories can provide a wide range of bioproducts. • Mucoromycota fungi are able to perform co-production of various metabolites in a single fermentation process. • Versatile metabolism of Mucoromycota allows valorization of a various low-cost substrates such as wastes and rest materials.

Effects and interactions of metal oxides in microparticle-enhanced cultivation of filamentous microorganisms

Filamentous microorganisms are used as molecular factories in industrial biotechnology. In 2007, a new approach to improve productivity in submerged cultivation was introduced: microparticle-enhanced cultivation (MPEC). Since then, numerous studies have investigated the influence of microparticles on the cultivation. Most studies considered MPEC a morphology engineering approach, in which altered morphology results in increased productivity. But sometimes similar morphological changes lead to decreased productivity, suggesting that this hypothesis is not a sufficient explanation for the effects of microparticles. Effects of surface chemistry on particles were paid little attention, as particles were often considered chemically-inert and bioinert. However, metal oxide particles strongly interact with their environment. This review links morphological, physical, and chemical properties of microparticles with effects on culture broth, filamentous morphology, and molecular biology. More precisely, surface chemistry effects of metal oxide particles lead to ion leaching, adsorption of enzymes, and generation of reactive oxygen species. Therefore, microparticles interfere with gene regulation, metabolism, and activity of enzymes. To enhance the understanding of microparticle-based morphology engineering, further interactions between particles and cells are elaborated. The presented description of phenomena occurring in MPEC eases the targeted choice of microparticles, and thus, contributes to improving the productivity of microbial cultivation technology.

Enhancing L-malate production of Aspergillus oryzae by nitrogen regulation strategy

Regulating morphology engineering and fermentation of Aspergillus oryzae makes it possible to increase the titer of L-malate. However, the existing L-malate-producing strain has limited L-malate production capacity and the fermentation process is insufficiently mature, which cannot meet the needs of industrial L-malate production. To further increase the L-malate production capacity of A. oryzae, we screened out a mutant strain (FMME-S-38) that produced 79.8 g/L L-malate in 250-mL shake flasks, using a newly developed screening system based on colony morphology on the plate. We further compared the extracellular nitrogen (N1) and intracellular nitrogen (N2) contents of the control and mutant strain (FMME-S-38) to determine the relationship between the curve of nitrogen content (N1 and N2) and the L-malate titer. This correlation was then used to optimize the conditions for developing a novel nitrogen supply strategy (initial tryptone concentration of 6.5 g/L and feeding with 3 g/L tryptone at 24 h). Fermentation in a 7.5-L fermentor under the optimized conditions further increased the titer and productivity of L-malate to 143.3 g/L and 1.19 g/L/h, respectively, corresponding to 164.9 g/L and 1.14 g/L/h in a 30-L fermentor. This nitrogen regulation-based strategy cannot only enhance industrial-scale L-malate production but also has generalizability and the potential to increase the production of similar metabolites.Key Points• Construction of a new screening system based on colony morphology on the plate.• A novel nitrogen regulation strategy used to regulate the production of L-malate.• A nitrogen supply strategy used to maximize the production of L-malate.

Evaluating the effects of microparticle addition on mycelial morphology, natural yellow pigments productivity, and key genes regulation in submerged fermentation of Monascus purpureus

Morphology plays an important role in fungal fermentation and secondary metabolites biosynthesis. One novel technique, microparticle-enhanced cultivation was successfully utilized to control the morphology of Monascus purpureus precisely and enhance the yield of yellow pigments. The production of yellow pigments increased to 554.2 U/ml when 4 g/L 5000 mesh talc added at 24 h. Field emission scanning electron microscope observation indicated that the actual effect depends on the properties of microparticle. Sharp-edged microparticles showed better stimulatory effects than smooth, round-shaped ones. Particle size analysis, scanning electron microscope, and cell integrity evaluation proved obvious morphological changes were induced by talc addition, including smaller mycelial size, rougher hyphae, and decreased cell integrity. Furthermore, the expression levels of MrpigG, MrpigD, MrpigE, and MrpigH were significantly upregulated by the addition of talc. It indicated that the microparticle could not only affect the mycelial morphology, but also influence the expression levels of key genes in biosynthetic pathway of Monascus yellow pigments.

Orchestration an extracellular lipase production from Aspergillus niger MYA 135: biomass morphology and fungal physiology

The impact of biomass morphology and culture conditions on fungal fermentation was widely reviewed in the literature. In this work, we presented three independent experiments in order to evaluate the influence of some of those input factors on a lipase production separately by using the Aspergillus niger MYA 135 and the two-stage fermentation technique. Regarding the culture modality, the biomass was pre-grown in a first reactor. Then, the washed mycelium was transferred to a second reactor to continue the study. Firstly, linear effects of fungal morphology and several physiological parameters on a lipase production were explored using the Plackett-Burman design. The dispersed fungal morphology was confirmed as a proper quality characteristic for producing an extracellular lipase activity. Concerning the impact of the carbon source on the biomass pre-growth, the sucrose (E = 9.923, p < 0.001) and the L-arabinose (E = 4.198, p = 0.009) presented positive and significant effects on the enzyme production. On the contrary, the supplementation of 0.05 g/L CaCl₂ displayed a highly negative and significant effect on this process (E = - 7.390, p < 0.001). Secondly, the relationship between the enzyme production and the input variables N:C ratio, FeCl₃ and olive oil was explored applying the central composite design. Among the model terms, the N:C ratio of the production medium had the most negative and significant influence on the enzyme synthesis. Thus, it was concluded that a low N:C ratio was preferable to increase its production. In addition, the bifunctional role of FeCl₃ on this fungus was presented. Thirdly, a prove of concept assay was also discussed.

Engineering microbial cell morphology and membrane homeostasis toward industrial applications

Microbial cell factory performance is significantly affected by the cell morphology and membrane homeostasis. It is important to ensure that cell factories are able to regulate cell morphology and maintain membrane homeostasis. Cell morphology can be controlled by regulating the formation of elongasomes and divisomes, which change the shapes of cells from rods to fibers, large spheres, or mini-cells. Membrane homeostasis can also be controlled by regulating the homeostasis of membrane lipids and proteins, thereby improving the robustness of microbes in toxic environments. In the present review, we discuss promising developments in cell morphology and membrane homeostasis engineering that have improved microbial cell factory performance.

Organic acids as antimicrobial food agents: applications and microbial productions

Food safety is a global health and socioeconomic concern since many people still suffer from various acute and life-long diseases, which are caused by consumption of unsafe food. Therefore, ensuring safety of the food is one of the most essential issues in the food industry, which needs to be considered during not only food composition formulation but also handling and storage. For safety purpose, various chemical preservatives have been used so far in the foods. Recently, there has been renewed interest in replacing chemically originated food safety compounds with natural ones in the industry, which can also serve as antimicrobial agents. Among these natural compounds, organic acids possess the major portion. Therefore, in this paper, it is aimed to review and compile the applications, effectiveness, and microbial productions of various widely used organic acids as antimicrobial agents in the food industry.

Cell surface display of proteins on filamentous fungi

Protein display approaches have been useful to endow the cell surface of yeasts with new catalytic activities so that they can act as enhanced whole-cell biocatalysts. Despite their biotechnological potential, protein display technologies remain poorly developed for filamentous fungi. The lignocellulolytic character of some of them coupled to the cell surface biosynthesis of valuable molecules by a single or a cascade of several displayed enzymes is an appealing prospect. Cell surface protein display consists in the co-translational fusion of a functional protein (passenger) to an anchor one, usually a cell-wall-resident protein. The abundance, spacing, and local environment of the displayed enzymes-determined by the relationship of the anchor protein with the structure and dynamics of the engineered cell wall-are factors that influence the performance of display-based biocatalysts. The development of protein display strategies in filamentous fungi could be based on the field advances in yeasts; however, the unique composition, structure, and biology of filamentous fungi cell walls require the customization of the approach to those microorganisms. In this prospective review, the cellular bases, the design principles, and the available tools to foster the development of cell surface protein display technologies in filamentous fungi are discussed.