Role of type 1 fimbriae and mannose in the development of Escherichia coli K12 biofilm: from initial cell adhesion to biofilm formation

Co-Expression of type 1 fimbriae and flagella in Escherichia coli: consequences for adhesion at interfaces

Escherichia coli expresses surface appendages including fimbriae, flagella, and curli, at various levels in response to environmental conditions and external stimuli. Previous studies have revealed an interplay between expression of fimbriae and flagella in several E. coli strains, but how this regulation between fimbrial and flagellar expression affects adhesion to interfaces is incompletely understood. Here, we investigate how the concurrent expression of fimbriae and flagella by engineered strains of E. coli MG1655 affects their adhesion at liquid-solid and liquid-liquid interfaces. We tune fimbrial and flagellar expression on the cell surface through plasmid-based inducible expression of the fim operon and fliC-flhDC genes. We show that increased fimbrial expression increases interfacial adhesion as well as bacteria-driven actuation of micron-sized objects. Co-expression of flagella in fimbriated bacteria, however, does not greatly affect either of these properties. Together, these results suggest that interfacial adhesion as well as motion actuated by adherent bacteria can be altered by controlling the expression of surface appendages.

Bacterial Surface Appendages Modulate the Antimicrobial Activity Induced by Nanoflake Surfaces on Titanium

Bioinspired nanotopography is a promising approach to generate antimicrobial surfaces to combat implant-associated infection. Despite efforts to develop bactericidal 1D structures, the antibacterial capacity of 2D structures and their mechanism of action remains uncertain. Here, hydrothermal synthesis is utilized to generate two 2D nanoflake surfaces on titanium (Ti) substrates and investigate the physiological effects of nanoflakes on bacteria. The nanoflakes impair the attachment and growth of Escherichia coli and trigger the accumulation of intracellular reactive oxygen species (ROS), potentially contributing to the killing of adherent bacteria. E. coli surface appendages type-1 fimbriae and flagella are not implicated in the nanoflake-mediated modulation of bacterial attachment but do influence the bactericidal effects of nanoflakes. An E. coli ΔfimA mutant lacking type-1 fimbriae is more susceptible to the bactericidal effects of nanoflakes than the parent strain, while E. coli cells lacking flagella (ΔfliC) are more resistant. The results suggest that type-1 fimbriae confer a cushioning effect that protects bacteria upon initial contact with the nanoflake surface, while flagella-mediated motility can lead to elevated membrane abrasion. This finding offers a better understanding of the antibacterial properties of nanoflake structures that can be applied to the design of antimicrobial surfaces for future medical applications.

Characterization of the surface-active exopolysaccharide produced by Halomonas sp TGOS-10: Understanding its role in the formation of marine oil snow

In this study, we characterize the exopolymer produced by Halomonas sp. strain TGOS-10 -one of the organisms found enriched in sea surface oil slicks during the Deepwater Horizon oil spill. The polymer was produced during the early stationary phase of growth in Zobell's 2216 marine medium amended with glucose. Chemical and proton NMR analysis showed it to be a relatively monodisperse, high-molecular-mass (6,440,000 g/mol) glycoprotein composed largely of protein (46.6% of total dry weight of polymer). The monosaccharide composition of the polymer is typical to that of other marine bacterial exopolymers which are generally rich in hexoses, with the notable exception that it contained mannose (commonly found in yeast) as a major monosaccharide. The polymer was found to act as an oil dispersant based on its ability to effectively emulsify pure and complex oils into stable oil emulsions-a function we suspect to be conferred by the high protein content and high ratio of total hydrophobic nonpolar to polar amino acids (52.7:11.2) of the polymer. The polymer's chemical composition, which is akin to that of other marine exopolymers also having a high protein-to-carbohydrate (P/C) content, and which have been shown to effect the rapid and non-ionic aggregation of marine gels, appears indicative of effecting marine oil snow (MOS) formation. We previously reported the strain capable of utilising aromatic hydrocarbons when supplied as single carbon sources. However, here we did not detect biodegradation of these chemicals within a complex (surrogate Macondo) oil, suggesting that the observed enrichment of this organism during the Deepwater Horizon spill may be explained by factors related to substrate availability and competition within the complex and dynamic microbial communities that were continuously evolving during that spill.

Role of LsrR in the regulation of biofilm formation in mammary pathogenic Escherichia coli

BACKGROUND

Mammary Pathogenic Escherichia coli (MPEC) is an important pathogen that can escape the attack of the host immune system through biofilm formation and proliferate in the mammary gland continuously, resulting in mastitis in cows and causing enormous economic losses. As an effector of AI-2 quorum sensing, LsrR extensively affects the expression levels of hundreds of genes related to multiple biological processes in model E. coli strain. However, the regulatory role of LsrR in MPEC and whether it is involved in pathogenesis has been seldom reported.

RESULTS

In this study, the function of LsrR in strain MPEC5, obtained from a milk sample in dairy cows with mastitis, was investigated by performing high-throughput sequencing (RNA-seq) assays. The results revealed that LsrR down-regulated the transcript levels of fimAICDFGH (encoding Type 1 pili), which have been reported to be associated with biofilm formation process. Biofilm assays confirmed that deletion of lsrR resulted in a significant increase in biofilm formation in vitro. In addition, electrophoretic mobility shift assay (EMSA) provided evidence that LsrR protein could directly bind to the promoter regions of fimAICDFGH in a dose-dependent manner.

CONCLUSIONS

These results indicate that LsrR protein inhibits the biofilm formation ability of MPEC5 by directly binding to the fimAICDFGH promoter region. This study presents a novel clue for further exploration of the prevention and treatment of MPEC.

Probiotic characteristics and whole-genome sequence analysis of Pediococcus acidilactici isolated from the feces of adult beagles

The beneficial effects of lactic acid bacteria are well known and recognized as functional foods that are health benefits for companion animals. This study, for the first time, reports the probiotic properties, safety, and whole-genome sequence of Pediococcus acidilactici GLP06 isolated from feces of beagles. In this study, candidate probiotic bacteria P. acidilactici GLP02 and GLP06 were morphologically characterized and tested for their antimicrobial capacity, tolerance to different conditions (low pH, bile salts, an artificial gastrointestinal model, and high temperature), antibiotic sensitivity, hemolytic activity, cell surface hydrophobicity, autoaggregation activity, and adhesion to Caco-2 cells. P. acidilactici GLP06 showed better probiotic potential. Therefore, P. acidilactici GLP06 was evaluated for in vivo safety in mice and whole-genome sequencing. The results showed, that the supplemented MG06 group (1010 cfu/mL), GLP06 was not only nontoxic to mice, but also promoted the development of the immune system, improved resistance to oxidative stress, and increased the diversity of intestinal microorganisms and the abundance of Lactobacillus. Whole-genome sequencing showed that P. acidilactici GLP06 was 2,014,515 bp and contained 1,976 coding sequences, accounting for 86.12% of the genome, with no drug resistance genes and eight CRISPR sequences. In conclusion, the newly isolated canine-derived P. acidilactici GLP06 had good probiotic potential, was nontoxic to mice and promoted the development of immune organs, improved the biodiversity of the intestinal flora, and had no risk of drug-resistant gene transfer, indicating that P. acidilactici GLP06 can be used as a potential probiotic for the prevention and treatment of gastrointestinal diseases in companion animals.

Blocking bacterial appendage attachment to wastewater treatment membranes using anti-adhesins

Membrane bioreactors (MBRs) suffer from high operational and cleaning costs due to biofouling. The biofouling begins when the adhesins (an anchor-type epitope made up of polar and charged amino acids) on microbial appendages bind to the surface. Two different compounds-dodecyl-β-D-maltoside (DDM) and methyl α-d-mannopyranoside (MeαMan)-were investigated as possible biofilm mitigation tools due to their documented anti-adhesin properties in the biomedical field. DDM prevented up to 56.3, 87.0, and 67.6% of the formation of Pseudomonas putida, Escherichia coli and wastewater culture biofilms, respectively, in microplate experiments. MeαMan increased biofilm in the microplates. In a biofilm reactor setting, DDM was then applied on typical membrane materials, polyvinylidene fluoride, polyamide, polyether-sulfone, and polyacrylonitrile and prevented 79.4, 62.5, 81.3, and 68.2% of the detectable wastewater culture biofilm formation, respectively. The mechanism of anti-adhesion was the binding of the polar head of the DDM to the polar amino acids of the microbial appendages in conjunction with the orientation of the DDM as it binds different membrane materials. If the anti-adhesins are effective at increasing the distance of the bacteria from the membrane materials, they will serve as a new method for delaying biofouling.

Analysis of Antibiotic Resistance and Biofilm-Forming Capacity in Tetracycline-Resistant Bacteria from a Coastal Lagoon

Concerns have been raised regarding co-selection for antibiotic resistance among bacteria exposed to antibiotics used as growth promoters for some livestock and poultry species. Tetracycline had been commonly used for this purpose worldwide, and its residue has been associated with selection of resistant bacteria in aquatic biofilms. This study aimed to determine the resistance profile, the existence of some beta-lactamases genes and the capacity to form biofilm of bacteria isolated from water samples previously exposed to tetracycline (20 mg/L). Thirty-seven tetracycline-resistant bacterial strains were identified as Serratia marcescens, Escherichia coli, Morganella morganii, Pseudomonas aeruginosa, Citrobacter freundii, Providencia alcalifaciens, and Enterococcus faecium. The highest percentage of resistance was for ampicillin (75.75%) and amoxicillin/clavulanic acid (66.66%) in the Gram-negative bacteria and an E. faecium strain showed high resistance to vancomycin (minimum inhibitory concentration 250 μg/mL). Among the strains analyzed, 81.09% had multidrug resistance and eight Gram-negatives carried the bla_OXA-48 gene. All strains were able to form biofilm and 43.23% were strong biofilm formers. This study suggests that resistant bacteria can be selected under selection pressure of tetracycline, and that these bacteria could contribute to the maintenance and spread of antimicrobial resistance in this environment.

Controlling the Carbon-Bio Interface via Glycan Functional Adlayers for Applications in Microbial Fuel Cell Bioanodes

Surface modification of electrodes with glycans was investigated as a strategy for modulating the development of electrocatalytic biofilms for microbial fuel cell applications. Covalent attachment of phenyl-mannoside and phenyl-lactoside adlayers on graphite rod electrodes was achieved via electrochemically assisted grafting of aryldiazonium cations from solution. To test the effects of the specific bio-functionalities, modified and unmodified graphite rods were used as anodes in two-chamber microbial fuel cell devices. Devices were set up with wastewater as inoculum and acetate as nutrient and their performance, in terms of output potential (open circuit and 1 kΩ load) and peak power output, was monitored over two months. The presence of glycans was found to lead to significant differences in startup times and peak power outputs. Lactosides were found to inhibit the development of biofilms when compared to bare graphite. Mannosides were found, instead, to promote exoelectrogenic biofilm adhesion and anode colonization, a finding that is supported by quartz crystal microbalance experiments in inoculum media. These differences were observed despite both adlayers possessing thickness in the nm range and similar hydrophilic character. This suggests that specific glycan-mediated bioaffinity interactions can be leveraged to direct the development of biotic electrocatalysts in bioelectrochemical systems and microbial fuel cell devices.

Evaluation of the impact of adaptation of Klebsiella pneumoniae clinical isolates to benzalkonium chloride on biofilm formation

Background

The percentage of the multidrug resistant Klebsiella pneumoniae clinical isolates is increasing worldwide. The excessive exposure of K. pneumoniae isolates to sublethal concentrations of biocides like benzalkonium chloride (BAC) in health care settings and communities could be one of the causes contributing in the global spread of antibiotic resistance.

Results

We collected 50 K. pneumoniae isolates and these isolates were daily exposed to gradually increasing sublethal concentrations of BAC. The consequence of adaptation to BAC on the cell surface hydrophobicity (CSH) and biofilm formation of K. pneumoniae isolates was explored. Remarkably, 16% of the tested isolates showed an increase in the cell surface hydrophobicity and 26% displayed an enhanced biofilm formation. To evaluate whether the influence of BAC adaptation on the biofilm formation was demonstrated at the transcriptional level, the RT-PCR was employed. Noteworthy, we found that 60% of the tested isolates exhibited an overexpression of the biofilm gene (bssS). After sequencing of this gene in K. pneumoniae isolates before and after BAC adaptation and performing pairwise alignment, 100% identity was detected; a finding that means the absence of mutation after adaptation to BAC.

Conclusion

This study suggests that the widespread and increased use of biocides like BAC at sublethal concentrations has led to an increase biofilm formation by K. pneumoniae isolates. Enhanced biofilm formation could result in treatment failure of the infections generated by this pathogen.

Mixed-charge pseudo-zwitterionic copolymer brush as broad spectrum antibiofilm coating

Zwitterionic polymers are classical antifouling polymers but they require specialized monomers that have cationic and anionic charges integrated into a single monomer. Herein, we show that pseudo-zwitterionic copolymers synthesized from a mixture of 2 monomers each having a single opposite polarity has excellent antibiofilm efficacy. We have discovered a new mixed-charge copolymer brush (#1-A) synthesized from 2 oppositely charged monomers, the anionic SPM (3-Sulfopropyl methacrylate) and the cationic AMPTMA ((3-Acrylamidopropyl) trimethylammonium chloride), that achieves broad spectrum in vitro antibiofilm effect of greater than 99% reductions against all six Gram-positive and Gram-negative bacteria tested. In the murine subcutaneous wound catheter infection models, the #1-A has good long-term anti-biofilm efficacy against MRSA and Pseudomonas aeruginosa of 3.41 and 3.19 orders respectively, outperforming previous mixed-charge copolymer coatings. We discovered a new method to choose the cationic/anionic pair combination to form the best antibiofilm copolymer brush coating by exploiting the solution polymerization kinetics disparity between the cationic and anionic monomers. We also showed that #1-A is softer and has higher hydration than the classical zwitterionic polymer. This study shows the possibility of achieving potent antibiofilm efficacy by combining readily available opposite singly charged monomers.

Phenotypic and Genetic Determination of Biofilm Formation in Heat Resistant Escherichia coli Possessing the Locus of Heat Resistance

Despite the effectiveness of thermal inactivation processes, Escherichiacoli biofilms continue to be a persistent source of contamination in food processing environments. E. coli strains possessing the locus of heat resistance are a novel food safety threat and raises the question of whether these strains can also form biofilms. The objectives of this study were to determine biofilm formation in heat resistant E. coli isolates from clinical and environmental origins using an in-house, two-component apparatus and to characterize biofilm formation-associated genes in the isolates using whole genome sequencing. Optimal conditions for biofilm formation in each of the heat resistant isolates were determined by manipulating inoculum size, nutrient concentration, and temperature conditions. Biofilm formation in the heat resistant isolates was detected at temperatures of 24 °C and 37 °C but not at 4 °C. Furthermore, biofilm formation was observed in all environmental isolates but only one clinical isolate despite shared profiles in biofilm formation-associated genes encoded by the isolates from both sources. The circulation of heat resistant E. coli isolates with multi-stress tolerance capabilities in environments related to food processing signify that such strains may be a serious food safety and public health risk.

Essential oils from Artemisia species inhibit biofilm formation and the virulence of Escherichia coli EPEC 2348/69

Enteropathogenic Escherichia coli E2346/69 (EPEC) has caused foodborne outbreaks worldwide and the bacterium forms antimicrobial-tolerant biofilms. The anti-biofilm formation of various components of essential oils extracted from selected medicinal plants were investigated and tested on EPEC and wild strains of E. coli. Oils extracted from the family Asteraceae and their major common constituents at 0.031 and 0.062% (V/v) were found to significantly inhibit biofilm formation without affecting the growth of planktonic cells. In addition, three plants belonging to this family (Artemisia herba alba, Artemisia campestris and Artemisia absinthium) played important roles in the antimicrobial activity. Interestingly, their essential oils reduced the ability of E. coli (the EPEC and K12 strains) to form a biofilm. The crystal violet reduction assay showed that the plant extracts tested reduced biofilm formation with the inhibition of bacterial attachment up to 45% for EPEC and 70% for E. coli K-12 after 24 h treatment at 0.62 mg ml^-1, demonstrating that Artemisia oils had a high anti-biofilm activity on the bacteria tested. The results indicate that the locus of enterocyte effacement (LEE) acquired by horizontal transfer promotes the formation of the attaching and effacing (A/E) lesion and increases the capacity of the photogen strain (EPEC) to form a biofilm. The chemical composition of the volatile compounds was obtained by gas chromatography-mass spectrometry analysis, which showed that the essential oils consisted of thirty-four compounds. Chamazulene (39.21%), β-pinene (32.07%), and α-thujone (29.39%) were the main constituents of the essential oils of A. herba alba, A. absinthium and A. campestris, respectively.

Pellicle formation by Escherichia coli K-12: Role of adhesins and motility

Initial work to generate physically robust biofilms for biocatalytic applications revealed that Escherichia coli K-12 can form a floating biofilm at the air-liquid interface, commonly referred to as a pellicle. Unlike other species where pellicle formation is well-characterised, such as Bacillus subtilis, there are few reports of E. coli K-12 pellicles in the literature. In order to study pellicle formation, a growth model was developed and pellicle formation was monitored over time. Mechanical forces, both motility and shaking, were shown to have effects on pellicle formation and development. The role and regulation of curli, an amyloid protein adhesin critical in E. coli K-12 biofilm formation, was studied by using promoter-green fluorescent protein reporters; flow cytometry and confocal laser scanning microscopy were used to monitor curli expression over time and in different locations. Curli were found to be not only crucial for pellicle formation, but also heterogeneously expressed within the pellicle. The components of the extracellular polymeric substances (EPS) in pellicles were analysed by confocal microscopy using lectins, revealing distinct pellicle morphology on the air-facing and medium-facing sides, and spatially- and temporally-regulated generation of the EPS components poly-N-acetyl glucosamine and colanic acid. We discuss the difference between pellicles formed by E. coli K-12, pathogenic E. coli strains and other species, and the relationship between E. coli K-12 pellicles and solid surface-attached biofilms.

Mechanics of biofilms formed of bacteria with fimbriae appendages

Gram-negative bacteria, as well as some Gram-positive bacteria, possess hair-like appendages known as fimbriae, which play an important role in adhesion of the bacteria to surfaces or to other bacteria. Unlike the sex pili or flagellum, the fimbriae are quite numerous, with of order 1000 fimbriae appendages per bacterial cell. In this paper, a recently developed hybrid model for bacterial biofilms is used to examine the role of fimbriae tension force on the mechanics of bacterial biofilms. Each bacterial cell is represented in this model by a spherocylindrical particle, which interact with each other through collision, adhesion, lubrication force, and fimbrial force. The bacterial cells absorb water and nutrients and produce extracellular polymeric substance (EPS). The flow of water and EPS, and nutrient diffusion within these substances, is computed using a continuum model that accounts for important effects such as osmotic pressure gradient, drag force on the bacterial cells, and viscous shear. The fimbrial force is modeled using an outer spherocylinder capsule around each cell, which can transmit tensile forces to neighboring cells with which the fimbriae capsule collides. We find that the biofilm structure during the growth process is dominated by a balance between outward drag force on the cells due to the EPS flow away from the bacterial colony and the inward tensile fimbrial force acting on chains of cells connected by adhesive fimbriae appendages. The fimbrial force also introduces a large rotational motion of the cells and disrupts cell alignment caused by viscous torque imposed by the EPS flow. The current paper characterizes the competing effects of EPS drag and fimbrial force using a series of computations with different values of the ratio of EPS to bacterial cell production rate and different numbers of fimbriae per cell.

Biophysical methods to quantify bacterial behaviors at oil-water interfaces

Motivated by the need for improved understanding of physical processes involved in bacterial biodegradation of catastrophic oil spills, we review biophysical methods to probe bacterial motility and adhesion at oil-water interfaces. This review summarizes methods that probe bulk, average behaviors as well as local, microscopic behaviors, and highlights opportunities for future work to bridge the gap between biodegradation and biophysics.

A review of cinnamaldehyde and its derivatives as antibacterial agents

There is a continuing rise in the occurrence of multidrug-resistant bacterial infections. Antibiotic resistance to currently available antibiotics has become a global health issue leading to an urgent need for alternative antibacterial strategies. There has been a renewed interest in the development of antibacterial agents from natural sources, and trans-cinnamaldehyde is an example of a naturally occurring compound that has received significant attention in recent years. Trans-Cinnamaldehyde has been shown to possess substantial antimicrobial activity, as well as an array of other medicinal properties, and represents an intriguing hit compound from which a number of derivatives have been developed. In some cases, these derivatives have been shown to possess improved activity, not only compared to trans-cinnamaldehyde but also to commonly used antibiotics. Therefore, understanding the antibacterial mechanisms of action that these compounds elicit is imperative in order to facilitate their development and the development of new antibacterial agents that could exploit similar mechanistic approaches. The purpose of this review is to provide an overview of current knowledge on the antibacterial activity and mechanisms of action of cinnamaldehyde and its derivatives, and to highlight significant contributions made in this research area. It is hoped that the findings presented in this work will aid the future development of new antibacterial agents.

Adaptation of Pseudomonas aeruginosa clinical isolates to benzalkonium chloride retards its growth and enhances biofilm production

The increasing percentage of Pseudomonas aeruginosa strains that are resistant to multiple antibiotics is a global problem. The exposure of P. aeruginosa isolates to repeated sub lethal concentrations of biocides in hospitals and communities may be one of the causes leading to increased antibiotic resistance. Benzalkonium chloride (BAC) is widely used as disinfectant and preservative. This study investigated the effect of exposure of P. aeruginosa clinical isolates to sub lethal concentrations of BAC on their antibiotic resistance, growth process and biofilm formation. The collected 43 P. aeruginosa clinical isolates were daily subjected to increasing sub lethal concentrations of BAC. The effect of adaptation on antibiotic resistance, growth process, cell surface hydrophobicity and biofilm formation of P. aeruginosa isolates were examined. Interestingly, Most P. aeruginosa isolates adapted to BAC showed an increase in antibiotic resistance and 66% of the isolates showed retardation of growth, 63% showed increased cell surface hydrophobicity and 23.5% exhibited enhanced biofilm formation by crystal violet assay. To define whether the effect of BAC adaptation on biofilm production was manifested at the transcriptional level, quantitative RT-PCR was used. We found that 60% of the tested isolates showed overexpression of ndvB biofilm gene. More efforts are required to diminish the increasing use of BAC to avoid bacterial adaptation to this biocide with subsequent retardation of growth and enhanced biofilm formation which could lead to antibiotic resistance and treatment failure of infections caused by this opportunistic pathogen.

Live E. coli bacteria label-free sensing using a microcavity in-line Mach-Zehnder interferometer

The paper presents the first study to date on selective label-free biosensing with a microcavity in-line Mach-Zehnder interferometer induced in an optical fiber. The sensing structures were fabricated in a single-mode fiber by femtosecond laser micromachining. In contrast to other studies of this sensing scheme, where only the sensitivity to refractive index changes in the cavity was investigated, this research used chemical surface treatment of the sensor to ensure detection specificity. Immobilized MS2 bacteriophages were applied as recognition elements specifically targeting live E. coli C3000 bacteria. It is shown that the sensor allows for real-time monitoring of biological phenomena taking place on the surface of the microcavity. The developed biosensor exhibits ultrahigh refractive index sensitivity of 15,000 nm/RIU and is capable of detecting live E. coli bacteria concentrations as low as 100 colony forming units (CFU)/mL in liquid volume as low as picoliters.

Review - Bacteria and their extracellular polymeric substances causing biofouling on seawater reverse osmosis desalination membranes

Biofouling in seawater reverse osmosis (SWRO) membranes is a critical issue faced by the desalination industry worldwide. The major cause of biofouling is the irreversible attachment of recalcitrant biofilms formed by bacteria and their extracellular polymeric substances (EPS) on membrane surfaces. Transparent exopolymer particles (TEP) and protobiofilms are recently identified as important precursors of membrane fouling. Despite considerable amount of research on SWRO biofouling, the control of biofouling still remains a challenge. While adoption of better pretreatment methods may help in preventing membrane biofouling in new desalination setups, it is also crucial to effectively disperse old, recalcitrant biofilms and prolong membrane life in operational plants. Most current practices employ the use of broad spectrum biocides and chemicals that target bacterial cells to disperse mature biofilms, which are evidently inefficient. EPS, being known as the strongest structural framework of biofilms, it is essential to breakdown and disintegrate the EPS components for effective biofilm removal. To achieve this, it is necessary to understand the chemical composition and key elements that constitute the EPS of major biofouling bacterial groups in multi-species, mature biofilms. However, significant gaps in understanding the complexity of EPS are evident by the failure to achieve effective prevention and mitigation of fouling in most cases. Some of the reasons may be difficulty in sampling membranes from fully operational full-scale plants, poor understanding of microbial communities and their ecological shifts under dynamic operational conditions within the desalination process, selection of inappropriate model species for laboratory-scale biofouling studies, and the laborious process of extraction and purification of EPS. This article reviews the novel findings on key aspects of SWRO membrane fouling and control measures with particular emphasis on the key sugars in EPS. As a novel strategy to alleviate biofouling, future control methods may be aimed towards specifically disintegrating and breaking down these key sugars rather than using broad spectrum chemicals such as biocides that are currently used in the industry.

Activation of the NLRP3 Inflammasome Pathway by Uropathogenic Escherichia coli Is Virulence Factor-Dependent and Influences Colonization of Bladder Epithelial Cells

The NLRP3 inflammasome and IL-1β release have recently been suggested to be important for the progression of urinary tract infection (UTI). However, much is still unknown regarding the interaction of UPEC and the NLRP3 inflammasome. The purpose of this study was to elucidate what virulence factors uropathogenic Escherichia coli (UPEC) use to modulate NLRP3 inflammasome activation and subsequent IL-1β release and the role of NLRP3 for UPEC colonization of bladder epithelial cells. The bladder epithelial cell line 5637, CRISPR/Cas9 generated NLRP3, caspase-1 and mesotrypsin deficient cell lines and transformed primary bladder epithelial cells (HBLAK) were stimulated with UPEC isolates and the non-pathogenic MG1655 strain. We found that the UPEC strain CFT073, but not MG1655, induced an increased caspase-1 activity and IL-1β release from bladder epithelial cells. The increase was shown to be mediated by α-hemolysin activation of the NLRP3 inflammasome in an NF-κB-independent manner. The effect of α-hemolysin on IL-1β release was biphasic, initially suppressive, later inductive. Furthermore, the phase-locked type-1-fimbrial ON variant of CFT073 inhibited caspase-1 activation and IL-1β release. In addition, the ability of CFT073 to adhere to and invade NLRP3 deficient cells was significantly reduced compare to wild-type cells. The reduced colonization of NLRP3-deficient cells was type-1 fimbriae dependent. In conclusion, we found that the NLRP3 inflammasome was important for type-1 fimbriae-dependent colonization of bladder epithelial cells and that both type-1 fimbriae and α-hemolysin can modulate the activity of the NLRP3 inflammasome.

Level of Fimbriation Alters the Adhesion of Escherichia coli Bacteria to Interfaces

Adhesion of bacteria to interfaces is the first step in pathogenic infection, in biofilm formation, and in bioremediation of oil spills and other pollutants. Bacteria use a variety of surface structures to promote interfacial adhesion, with the level of expression of these structures varying in response to local conditions and environmental signals. Here, we investigated how overexpression of type 1 fimbriae, one such appendage, modifies the ability of Escherichia coli to adhere to solid substrates, via biofilm formation and yeast agglomeration, and to oil/water interfaces, via a microbial adhesion to hydrocarbon assay. A plasmid that enables inducible expression of E. coli MG1655 type 1 fimbriae was transformed into fimbriae-deficient mutant strain MG1655ΔfimA. The level of fimH gene expression in the engineered strain, measured using quantitative real-time PCR, could be tuned by changing the concentration of inducer isopropyl β-d-1-thiogalactopyranoside (IPTG), and was higher than that in strain MG1655. Increasing the degree of fimbriation only slightly modified the surface energy and zeta potential of the bacteria, but enhanced their ability to agglomerate yeast cells and to adhere to solid substrates (as measured by biofilm formation) and to oil/water interfaces. We anticipate that the tunable extent of fimbriation accessible with this engineered strain can be used to investigate how adhesin expression modifies the ability of bacteria to adhere to interfaces and to actively self-assemble there.

Surface conditioning with Escherichia coli cell wall components can reduce biofilm formation by decreasing initial adhesion

Bacterial adhesion and biofilm formation on food processing surfaces pose major risks to human health. Non-efficient cleaning of equipment surfaces and piping can act as a conditioning layer that affects the development of a new biofilm post-disinfection. We have previously shown that surface conditioning with cell extracts could reduce biofilm formation. In the present work, we hypothesized that E. coli cell wall components could be implicated in this phenomena and therefore mannose, myristic acid and palmitic acid were tested as conditioning agents. To evaluate the effect of surface conditioning and flow topology on biofilm formation, assays were performed in agitated 96-well microtiter plates and in a parallel plate flow chamber (PPFC), both operated at the same average wall shear stress (0.07 Pa) as determined by computational fluid dynamics (CFD). It was observed that when the 96-well microtiter plate and the PPFC were used to form biofilms at the same shear stress, similar results were obtained. This shows that the referred hydrodynamic feature may be a good scale-up parameter from high-throughput platforms to larger scale flow cell systems as the PPFC used in this study. Mannose did not have any effect on E. coli biofilm formation, but myristic and palmitic acid inhibited biofilm development by decreasing cell adhesion (in about 50%). These results support the idea that in food processing equipment where biofilm formation is not critical below a certain threshold, bacterial lysis and adsorption of cell components to the surface may reduce biofilm buildup and extend the operational time.

Designing polymeric adhesives for antimicrobial materials: poly(ethylene imine) polymer, graphene, graphene oxide and molybdenum trioxide - a biomimetic approach

The synthesis of biocompatible polymers for coating applications has gained significant attention in recent years due to the increasing spread of infectious diseases via contaminated surfaces. One strategy to combat this problem is to apply antimicrobial coatings to surfaces prone to microbial contamination. This study presents a series of biomimetic polymers that can be used as adhesives to immobilize known antimicrobial agents on the surfaces as coatings. Several polymers containing dopamine methacrylate as co-polymers were synthesized and investigated as adhesives for the deposition of an antimicrobial polymer (polyethyleneimine) and antimicrobial nanoparticles (graphene, graphene oxide and molybdenum trioxide) onto glass surfaces. The results showed that different antimicrobials required different types of adhesives for effective coating. Overall, the coatings fabricated from these composites were shown to inactivate E. coli and B. subtilis within 1 h. These coatings were also effective to prevent biofilm growth and demonstrated to be non-toxic to the human corneal epithelial cell line (htCEpi). Leaching tests of the coatings proved that the coatings were stable under biological conditions.

Antifungal activity of ionic liquids based on (-)-menthol: a mechanism study

The mechanism of toxicity of chiral ionic liquids with (1R,2S,5R)-(-)-menthol [C_n-Am-Men][Cl] (n=10, 11 or 12) in the fungus Candida albicans is reported here. Ionic liquids were more toxic towards Candida strain lacking all identified multidrug resistance efflux pumps. Moreover, the compounds tested inhibited C. albicans filamentation at the concentration at which detached fungal cells also adhered to the plastic surface. Our results showed the high activity of all the tested chiral ionic liquids in the permeabilization of C. albicans' membranes and in the digestion and interruption of the cell wall. The investigated ionic liquids thus have potential as disinfectants because besides their antifungal and antiadhesive action these compounds do not cause hemolysis.

Mannoside recognition and degradation by bacteria

Mannosides constitute a vast group of glycans widely distributed in nature. Produced by almost all organisms, these carbohydrates are involved in numerous cellular processes, such as cell structuration, protein maturation and signalling, mediation of protein-protein interactions and cell recognition. The ubiquitous presence of mannosides in the environment means they are a reliable source of carbon and energy for bacteria, which have developed complex strategies to harvest them. This review focuses on the various mannosides that can be found in nature and details their structure. It underlines their involvement in cellular interactions and finally describes the latest discoveries regarding the catalytic machinery and metabolic pathways that bacteria have developed to metabolize them.

LapF and Its Regulation by Fis Affect the Cell Surface Hydrophobicity of Pseudomonas putida

The ability of bacteria to regulate cell surface hydrophobicity is important for the adaptation to different environmental conditions. The hydrophobicity of cell surface can be determined by several factors, including outer membrane and surface proteins. In this study, we report that an adhesin LapF influences cell surface hydrophobicity of Pseudomonas putida. Cells lacking LapF are less hydrophobic than wild-type cells in stationary growth phase. Moreover, the overexpression of the global regulator Fis decreases surface hydrophobicity by repressing the expression of lapF. Flow cytometry analysis revealed that bacteria producing LapF are more viable when confronted with methanol (a hydrophilic compound) but are more susceptible to 1-octanol (a hydrophobic compound). Thus, these results revealed that LapF is the hydrophobicity factor for the cell surface of P. putida.

Essential Oils and Eugenols Inhibit Biofilm Formation and the Virulence of Escherichia coli O157:H7

Enterohemorrhagic Escherichia coli O157:H7 (EHEC) has caused foodborne outbreaks worldwide and the bacterium forms antimicrobial-tolerant biofilms. We investigated the abilities of various plant essential oils and their components to inhibit biofilm formation by EHEC. Bay, clove, pimento berry oils and their major common constituent eugenol at 0.005% (v/v) were found to markedly inhibit EHEC biofilm formation without affecting planktonic cell growth. In addition, three other eugenol derivatives isoeugenol, 2-methoxy-4-propylphenol, and 4-ethylguaiacol had antibiofilm activity, indicating that the C-1 hydroxyl unit, the C-2 methoxy unit, and C-4 alkyl or alkane chain on the benzene ring of eugenol play important roles in antibiofilm activity. Interestingly, these essential oils and eugenol did not inhibit biofilm formation by three laboratory E. coli K-12 strains that reduced curli fimbriae production. Transcriptional analysis showed that eugenol down-regulated 17 of 28 genes analysed, including curli genes (csgABDFG), type I fimbriae genes (fimCDH) and ler-controlled toxin genes (espD, escJ, escR, and tir), which are required for biofilm formation and the attachment and effacement phenotype. In addition, biocompatible poly(lactic-co-glycolic acid) coatings containing clove oil or eugenol exhibited efficient biofilm inhibition on solid surfaces. In a Caenorhabditis elegans nematode model, clove oil and eugenol attenuated the virulence of EHEC.

Evidence of Naturalized Stress-Tolerant Strains of Escherichia coli in Municipal Wastewater Treatment Plants

Escherichia coli has been proposed to have two habitats—the intestines of mammals/birds and the nonhost environment. Our goal was to assess whether certain strains of E. coli have evolved toward adaptation and survival in wastewater. Raw sewage samples from different treatment plants were subjected to chlorine stress, and ∼59% of the surviving E. coli strains were found to contain a genetic insertion element (IS30) located within the uspC-flhDC intergenic region. The positional location of the IS30 element was not observed across a library of 845 E. coli isolates collected from various animal hosts or within GenBank or whole-genome reference databases for human and animal E. coli isolates (n = 1,177). Phylogenetics clustered the IS30 element-containing wastewater E. coli isolates into a distinct clade, and biomarker analysis revealed that these wastewater isolates contained a single nucleotide polymorphism (SNP) biomarker pattern that was specific for wastewater. These isolates belonged to phylogroup A, possessed generalized stress response (RpoS) activity, and carried the locus of heat resistance, features likely relevant to nonhost environmental survival. Isolates were screened for 28 virulence genes but carried only the fimH marker. Our data suggest that wastewater contains a naturalized resident population of E. coli. We developed an endpoint PCR targeting the IS30 element within the uspC-flhDC intergenic region, and all raw sewage samples (n = 21) were positive for this marker. Conversely, the prevalence of this marker in E. coli-positive surface and groundwater samples was low (≤5%). This simple PCR assay may represent a convenient microbial source-tracking tool for identification of water samples affected by municipal wastewater.

IMPORTANCE The results of this study demonstrate that some strains of E. coli appear to have evolved to become naturalized populations in the wastewater environment and possess a number of stress-related genetic elements likely important for survival in this nonhost environment. The presence of non-host-adapted strains in wastewater challenges our understanding of using E. coli as a microbial indicator of wastewater treatment performance, suggesting that the E. coli strains present in human and animal feces may be very different from those found in treated wastewater.

Proteomics dedicated to biofilmology: What have we learned from a decade of research?

Advances in proteomics techniques over the past decade, closely integrated with genomic and physicochemical approach, have played a great role in developing knowledge of the biofilm lifestyle of bacteria. Despite bacterial proteome versatility, many studies have demonstrated the ability of proteomics approaches to elucidating the biofilm phenotype. Though these investigations have been largely used for biofilm studies in the last decades, they represent, however, a very low percentage of proteomics works performed up to now. Such approaches have offered new targets for combating microbial biofilms by providing a comprehensive quantitative and qualitative overview of their protein cell content. Herein, we summarized the state of the art in knowledge about biofilm physiology after one decade of proteomic analysis. In a second part, we highlighted missing research tracks for the next decade, emphasizing the emergence of posttranslational modifications in proteomic studies stemming from recent advances in mass spectrometry-based proteomics.

Attachment from flow of Escherichia coli bacteria onto silanized glass substrates

We investigate the attachment of Escherichia coli on silanized glass surfaces during flow through a linear channel at flow rates of 0.1-1 mL/min using confocal microscopy. We assemble layers of organosilanes on glass and track the position and orientation of bacteria deposited on these surfaces during flow with high spatial resolution. We find that a metric based on the degree of the surface-tethered motion of bacteria driven by flagella is inversely correlated with deposition rate, whereas conventional surface characterizations, such as surface energy or water contact angle, are uncorrelated. Furthermore, the likelihood that an initially moving bacterium becomes immobilized increases with increasing deposition rate. Our results suggest that the chemistry and arrangement of silane molecules on the surface influence the transition from transient to irreversible attachment by favoring different mechanisms used by bacteria to attach to surfaces.

How microorganisms use hydrophobicity and what does this mean for human needs?

Cell surface hydrophobicity (CSH) plays a crucial role in the attachment to, or detachment from the surfaces. The influence of CSH on adhesion of microorganisms to biotic and abiotic surfaces in medicine as well as in bioremediation and fermentation industry has both negative and positive aspects. Hydrophobic microorganisms cause the damage of surfaces by biofilm formation; on the other hand, they can readily accumulate on organic pollutants and decompose them. Hydrophilic microorganisms also play a considerable role in removing organic wastes from the environment because of their high resistance to hydrophobic chemicals. Despite the many studies on the environmental and metabolic factors affecting CSH, the knowledge of this subject is still scanty and is in most cases limited to observing the impact of hydrophobicity on adhesion, aggregation or flocculation. The future of research seems to lie in finding a way to managing the microbial adhesion process, perhaps by steering cell hydrophobicity.

96-well microtiter plates for biofouling simulation in biomedical settings

Microtiter plates with 96 wells are routinely used in biofilm research mainly because they enable high-throughput assays. These platforms are used in a variety of conditions ranging from static to dynamic operation using different shaking frequencies and orbital diameters. The main goals of this work were to assess the influence of nutrient concentration and flow conditions on biofilm formation by Escherichia coli in microtiter plates and to define the operational conditions to be used in order to simulate relevant biomedical scenarios. Assays were performed in static mode and in incubators with distinct orbital diameters using different concentrations of glucose, peptone and yeast extract. Computational fluid dynamics (CFD) was used to simulate the flow inside the wells for shaking frequencies ranging from 50 to 200 rpm and orbital diameters from 25 to 100 mm. Higher glucose concentrations enhanced adhesion of E. coli in the first 24 h, but variation in peptone and yeast extract concentration had no significant impact on biofilm formation. Numerical simulations indicate that 96-well microtiter plates can be used to simulate a variety of biomedical scenarios if the operating conditions are carefully set.

Diverse plant extracts and trans-resveratrol inhibit biofilm formation and swarming of Escherichia coli O157:H7

Infection with enterohemorrhagic Escherichia coli O157:H7 (EHEC) is a worldwide problem. Of the 498 plant extracts screened against EHEC, 16 inhibited the formation of biofilm of EHEC by >85% without inhibiting the growth of planktonic cells, and 14 plant extracts reduced the swarming motility of EHEC. The most active extract, Carex dimorpholepis, decreased swimming and swarming motilities and curli formation. Transcriptional analyses showed that the extract of C. dimorpholepis repressed curli genes, various motility genes, and AI-2 quorum sensing genes, which was corroborated by reduction in the production of fimbria, motility, and biofilm by EHEC. Trans-resveratrol at 10 μg ml(-1) in the extract of C. dimorpholepis was found to be a new anti-biofilm compound against EHEC, but importantly, the extract of C. dimorpholepis and trans-resveratrol did not inhibit the fomation of biofilm in four commensal E. coli strains. Furthermore, the extract of C. dimorpholepis decreased the adhesion of EHEC cells to human epithelial cells without affecting the viability of these cells.

Fluorescence-based in situ assay to probe the viability and growth kinetics of surface-adhering and suspended recombinant bacteria

Bacterial adhesion and biofilm growth can cause severe biomaterial-related infections and failure of medical implants. To assess the antifouling properties of engineered coatings, advanced approaches are needed for in situ monitoring of bacterial viability and growth kinetics as the bacteria colonize a surface. Here, we present an optimized protocol for optical real-time quantification of bacterial viability. To stain living bacteria, we replaced the commonly used fluorescent dye SYTO(®) 9 with endogenously expressed eGFP, as SYTO(®) 9 inhibited bacterial growth. With the addition of nontoxic concentrations of propidium iodide (PI) to the culture medium, the fraction of live and dead bacteria could be continuously monitored by fluorescence microscopy as demonstrated here using GFP expressing Escherichia coli as model organism. The viability of bacteria was thereby monitored on untreated and bioactive dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DMOAC)-coated glass substrates over several hours. Pre-adsorption of the antimicrobial surfaces with serum proteins, which mimics typical protein adsorption to biomaterial surfaces upon contact with host body fluids, completely blocked the antimicrobial activity of the DMOAC surfaces as we observed the recovery of bacterial growth. Hence, this optimized eGFP/PI viability assay provides a protocol for unperturbed in situ monitoring of bacterial viability and colonization on engineered biomaterial surfaces with single-bacteria sensitivity under physiologically relevant conditions.

Photoluminescent gold nanoclusters as sensing probes for uropathogenic Escherichia coli

Glycan-bound nanoprobes have been demonstrated as suitable sensing probes for bacteria containing glycan binding sites. In this study, we demonstrated a facile approach for generating glycan-bound gold nanoclusters (AuNCs). The generated AuNCs were used as sensing probes for corresponding target bacteria. Mannose-capped AuNCs (AuNCs@Mann) were generated and used as the model sensors for target bacteria. A one-step synthesis approach was employed to generate AuNCs@Mann. In this approach, an aqueous solution of tetrachloroauric acid and mannoside that functionized with a thiol group (Mann-SH) was stirred at room temperature for 48 h. The mannoside functions as reducing and capping agent. The size of the generated AuNCs@Mann is 1.95±0.27 nm, whereas the AuNCs with red photoluminescence have a maximum emission wavelength of ~630 nm (λexcitation = 375 nm). The synthesis of the AuNCs@Mann was accelerated by microwave heating, which enabled the synthesis of the AuNCs@Mann to complete within 1 h. The generated AuNCs@Mann are capable of selectively binding to the urinary tract infection isolate Escherichia coli J96 containing the mannose binding protein FimH expressed on the type 1 pili. On the basis of the naked eye observation, the limit of detection of the sensing approach is as low as ~2×10(6) cells/mL.

In vitro adherence patterns of Shigella serogroups to bovine recto-anal junction squamous epithelial (RSE) cells are similar to those of Escherichia coli O157

The aims of this study were to determine whether Shigella species, which are human gastrointestinal pathogens, can adhere to cattle recto-anal junction squamous epithelial (RSE) cells using a recently standardized in vitro adherence assay, and to compare their adherence patterns with that of Escherichia coli O157. Shigella dysenteriae (serogroup A), S. flexneri (serogroup B), S. boydii (serogroup C), and S. sonnei (serogroup D) were tested in adherence assays using both RSE and HEp-2 cells, in the presence or absence of D+mannose. Escherichia coli O157, which adheres to RSE cells in a Type I fimbriae-independent manner, was used as a positive control. Shigella serogroups A, B, D, but not C adhered to RSE cells with distinct adherence patterns in the presence of D+mannose. No such distinction could be made between the four Shigella serogroups based on the HEp-2 cell adherence patterns. Thus, this study provides evidence that certain Shigella serogroups adhere to RSE cells in a manner that is similar to the adherence pattern of E. coli O157. These unexpected observations of in vitro binding of these foodborne human pathogens to cells of the bovine gastrointestinal tract warrant evaluation of Shigella carriage by cattle using both experimental and observational studies, especially for serogroups B and D. Such studies are currently underway.

Impact of an extracellular polymeric substance (EPS) precoating on the initial adhesion of Burkholderia cepacia and Pseudomonas aeruginosa

Extracellular polymeric substances (EPS) significantly influence bacterial adhesion to solid surfaces, but it is difficult to elucidate the role of EPS on bacterial adhesion due to their complexity and variability. In the present study, the effect of EPS on the initial adhesion of B. cepaciaepacia PC184 and P. aeruginosa PAO1 on glass slides with and without an EPS precoating was investigated under three ionic strength conditions. The surface roughness of EPS coated slides was evaluated by atomic force microscopy (AFM), and its effect on initial bacterial adhesion was found to be trivial. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the elemental surface compositions of bacterial cells and substrata. The results showed that an EPS precoating hindered bacterial adhesion on solid surfaces, which was largely attributed to the presence of proteins in the EPS. This observation can be attributed to the increased steric repulsion at high ionic strength conditions. A steric model for polymer brushes that considers the combined influence of steric effects and DLVO interaction forces is shown to adequately describe bacterial adhesion behaviors.

Probing roles of lipopolysaccharide, type 1 fimbria, and colanic acid in the attachment of Escherichia coli strains on inert surfaces

The roles of bacterial surface polymers in reversible (phase I) and irreversible (phase II) attachment (i.e., lipopolysaccharides (LPS), type 1 fimbria, and capsular colanic acid (CA)) were investigated in situ by combining fluorescence microscopy and atomic force microscopy. Fluorescence microscopy was used to evaluate the phase I attachment by counting the total number of cells on the substrata, and AFM was applied to image the phase II cells and measure the lateral detachment force to characterize phase II attachment. Also, by comparing the number of cells in phases I and II, the transformation ratio was calculated and used as an index to evaluate the roles of different polymers in the attachment process. Escherichia coli K-12 and its six mutants, which had different surface polymers in terms of LPS structures, CA contents, and type 1 fimbriae, were used as the test strains. Six different materials were applied as substrata, including glass, two metals (aluminum and stainless steel), and three plastics (polyvinyl chloride, polycarbonate, and polyethylene). The results indicated that LPS significantly enhanced phases I and II attachment as well as the transformation ratio from phase I to II. Like LPS, type 1 fimbriae largely increased the phase I attachment and the transformation ratio; however, they did not significantly influence the adhesion strength in phase II. CA had a negative effect on attachment in phases I and II by decreasing the adhered number of cells and the lateral detachment force, respectively, but had no influence on the transformation ratio.

Combating bacterial colonization on metals via polymer coatings: relevance to marine and medical applications

Metals are widely used in engineering as well as medical applications. However, their surfaces are easily colonized by bacteria that form biofilms. Among the numerous concerns with biofilm formation, biocorrosion is of particular importance in industry, because structural integrity may be compromised, leading to technical failures. In the food industry and medical field, biofilms also pose health risks. To inhibit bacterial colonization, the surfaces of metals can be coated with a polymeric layer which is antiadhesive and/or bactericidal. This article describes polymers that have these desired properties and the methodologies for immobilizing them on metal surfaces of relevance to the marine and medical fields. The focus is on polymer coatings that have a high degree of stability in aqueous medium and do not leach out. The efficacies of the different polymer coatings against bacteria commonly encountered in marine (Desulfovibrio desulfuricans) and medical applications (Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli) are demonstrated.

Physicochemical regulation of biofilm formation

This article reviews the physical and chemical constraints of environments on biofilm formation. We provide a perspective on how materials science and engineering can address fundamental questions and unmet technological challenges in this area of microbiology, such as biofilm prevention. Specifically, we discuss three factors that impact the development and organization of bacterial communities. (1) Physical properties of surfaces regulate cell attachment and physiology and affect early stages of biofilm formation. (2) Chemical properties influence the adhesion of cells to surfaces and their development into biofilms and communities. (3) Chemical communication between cells attenuates growth and influences the organization of communities. Mechanisms of spatial and temporal confinement control the dimensions of communities and the diffusion path length for chemical communication between biofilms, which, in turn, influences biofilm phenotypes. Armed with a detailed understanding of biofilm formation, researchers are applying the tools and techniques of materials science and engineering to revolutionize the study and control of bacterial communities growing at interfaces.