Determination of biofilm mechanical properties from tensile tests performed using a micro-cantilever method

A novel model for biofilm initiation in porous media flow

Bacteria often form biofilms in porous environments where an external flow is present, such as soil or filtration systems. To understand the initial stages of biofilm formation, one needs to study the interactions between cells, the fluid and the confining geometries. Here, we present an agent based numerical model for bacteria that takes into account the planktonic stage of motile cells as well as surface attachment and biofilm growth in a lattice Boltzmann fluid. In the planktonic stage we show the importance of the interplay between complex flow and cell motility when determining positions of surface attachment. In the growth stage we show the applicability of our model by investigating how external flow and biofilm stiffness determine qualitative colony morphologies as well as quantitative measurements of, e.g., permeability.

Design of surfaces for controlling hard and soft fouling

In this review, we present a framework to guide the design of surfaces which are resistant to solid fouling, based on the modulus and length scale of the fouling material. Solid fouling is defined as the undesired attachment of solid contaminants including ice, clathrates, waxes, inorganic scale, polymers, proteins, dust and biological materials. We first provide an overview of the surface design approaches typically applied across the scope of solid fouling and explain how these disparate research efforts can be united to an extent under a single framework. We discuss how the elastic modulus and the operating length scale of a foulant determine its ability or inability to elastically deform surfaces. When surface deformation occurs, minimization of the substrate elastic modulus is critical for the facile de-bonding of a solid contaminant. Foulants with low modulus or small deposition sizes cannot deform an elastic bulk material and instead de-bond more readily from surfaces with chemistries that minimize their interfacial free energy or induce a particular repellant interaction with the foulant. Overall, we review reported surface design strategies for the reduction in solid fouling, and provide perspective regarding how our framework, together with the modulus and length scale of a foulant, can guide future antifouling surface designs. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology'.

Optically Responsive, Smart Anti-Bacterial Coatings via the Photofluidization of Azobenzenes

Antibacterial strategies sans antibiotic drugs have recently garnered much interest as a mechanism by which to inhibit biofilm formation and growth on surfaces due to the rise of antibiotic-resistant bacteria. Based on the photofluidization of azobenzenes, we demonstrate for the first time the ability achieve up to a 4 log reduction in bacterial biofilms by opto-mechanically activating the disruption and dispersion of biofilms. This unique strategy with which to enable biofilm removal offers a novel paradigm with which to combat antibiotic resistance.

Microrheology of growing Escherichia coli biofilms investigated by using magnetic force modulation atomic force microscopy

Microrheology of growing biofilms provides insightful information about its structural evolution and properties. In this study, the authors have investigated the microrheology of Escherichia coli (strain HCB1) biofilms at different indentation depth (δ) by using magnetic force modulation atomic force microscopy as a function of disturbing frequency (f). As δ increases, the dynamic stiffness (k_s) for the biofilms in the early stage significantly increases. However, it levels off when the biofilms are matured. The facts indicate that the biofilms change from inhomogeneous to homogeneous in structure. Moreover, k_s is scaled to f, which coincides with the rheology of soft glasses. The exponent increases with the incubation time, indicating the fluidization of biofilms. In contrast, the upper layer of the matured biofilms is solidlike in that the storage modulus is always larger than the loss modulus, and its viscoelasticity is slightly influenced by the shear stress.

Response of Simulated Drinking Water Biofilm Mechanical and Structural Properties to Long-Term Disinfectant Exposure

Mechanical and structural properties of biofilms influence the accumulation and release of pathogens in drinking water distribution systems (DWDS). Thus, understanding how long-term residual disinfectants exposure affects biofilm mechanical and structural properties is a necessary aspect for pathogen risk assessment and control. In this study, elastic modulus and structure of groundwater biofilms was monitored by atomic force microscopy (AFM) and optical coherence tomography (OCT) during three months of exposure to monochloramine or free chlorine. After the first month of disinfectant exposure, the mean stiffness of monochloramine- or free-chlorine-treated biofilms was 4 to 9 times higher than those before treatment. Meanwhile, the biofilm thickness decreased from 120 ± 8 μm to 93 ± 6-107 ± 11 μm. The increased surface stiffness and decreased biofilm thickness within the first month of disinfectant exposure was presumably due to the consumption of biomass. However, by the second to third month during disinfectant exposure, the biofilm mean stiffness showed a 2- to 4-fold decrease, and the biofilm thickness increased to 110 ± 7-129 ± 8 μm, suggesting that the biofilms adapted to disinfectant exposure. After three months of the disinfectant exposure process, the disinfected biofilms showed 2-5 times higher mean stiffness (as determined by AFM) and 6-13-fold higher ratios of protein over polysaccharide, as determined by differential staining and confocal laser scanning microscopy (CLSM), than the nondisinfected groundwater biofilms. However, the disinfected biofilms and nondisinfected biofilms showed statistically similar thicknesses (t test, p > 0.05), suggesting that long-term disinfection may not significantly remove net biomass. This study showed how biofilm mechanical and structural properties vary in response to a complex DWDS environment, which will contribute to further research on the risk assessment and control of biofilm-associated-pathogens in DWDS.

Biofilm Cohesive Strength as a Basis for Biofilm Recalcitrance: Are Bacterial Biofilms Overdesigned?

Bacterial biofilms are highly resistant to common antibacterial treatments, and several physiological explanations have been offered to explain the recalcitrant nature of bacterial biofilms. Herein, a biophysical aspect of biofilm recalcitrance is being reported on. While engineering structures are often overdesigned with a factor of safety (FOS) usually under 10, experimental measurements of biofilm cohesive strength suggest that the FOS is on the order of thousands. In other words, bacterial biofilms appear to be designed to withstand extreme forces rather than typical or average loads. In scenarios requiring the removal or control of unwanted biofilms, this emphasizes the importance of considering strategies for structurally weakening the biofilms in conjunction with bacterial inactivation.

Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach

A good understanding of the mechanical stability of biofilms is essential for biofouling management, particularly when mechanical forces are used. Previous biofilm studies lack a damage-based theoretical model to describe the biofilm separation from a surface. The purpose of the current study was to investigate the interfacial separation of a mature biofilm from a rigid glass substrate using a combined experimental and numerical modelling approach. In the current work, the biofilm-glass interfacial separation process was investigated under tensile and shear stresses at the macroscale level, known as modes I and II failure mechanisms respectively. The numerical simulations were performed using a Finite Volume (FV)-based simulation package (OpenFOAM®) to predict the separation initiation using the cohesive zone model (CZM). Atomic force microscopy (AFM)-based retraction curve was used to obtain the separation properties between the biofilm and glass colloid at microscale level, where the CZM parameters were estimated using the Johnson-Kendall-Roberts (JKR) model. In this study CZM is introduced as a reliable method for the investigation of interfacial separation between a biofilm and rigid substrate, in which a high local stress at the interface edge acts as an ultimate stress at the crack tip.This study demonstrated that the total interfacial failure energy measured at the macroscale, was significantly higher than the pure interfacial separation energy obtained by AFM at the microscale, indicating a highly ductile deformation behaviour within the bulk biofilm matrix. The results of this study can significantly contribute to the understanding of biofilm detachments.

Material properties of biofilms-a review of methods for understanding permeability and mechanics

Microorganisms can form biofilms, which are multicellular communities surrounded by a hydrated extracellular matrix of polymers. Central properties of the biofilm are governed by this extracellular matrix, which provides mechanical stability to the 3D biofilm structure, regulates the ability of the biofilm to adhere to surfaces, and determines the ability of the biofilm to adsorb gases, solutes, and foreign cells. Despite their critical relevance for understanding and eliminating of biofilms, the materials properties of the extracellular matrix are understudied. Here, we offer the reader a guide to current technologies that can be utilized to specifically assess the permeability and mechanical properties of the biofilm matrix and its interacting components. In particular, we highlight technological advances in instrumentation and interactions between multiple disciplines that have broadened the spectrum of methods available to conduct these studies. We review pioneering work that furthers our understanding of the material properties of biofilms.

Single particle tracking reveals spatial and dynamic organization of the E. coli biofilm matrix

Biofilms are communities of surface-adherent bacteria surrounded by secreted polymers known as the extracellular polymeric substance (EPS). Biofilms are harmful in many industries, and thus it is of great interest to understand their mechanical properties and structure to determine ways to destabilize them. By performing single particle tracking with beads of varying surface functionalization it was found that charge interactions play a key role in mediating mobility within biofilms. With a combination of single particle tracking and microrheological concepts, it was found that Escherichia coli biofilms display height dependent charge density that evolves over time. Statistical analyses of bead trajectories and confocal microscopy showed inter-connecting micron scale channels that penetrate throughout the biofilm, which may be important for nutrient transfer through the system. This methodology provides significant insight into a particular biofilm system and can be applied to many others to provide comparisons of biofilm structure. The elucidation of structure provides evidence for the permeability of biofilms to microscale objects, and the ability of a biofilm to mature and change properties over time.

Biophysics of biofilm infection

This article examines a likely basis of the tenacity of biofilm infections that has received relatively little attention: the resistance of biofilms to mechanical clearance. One way that a biofilm infection persists is by withstanding the flow of fluid or other mechanical forces that work to wash or sweep microorganisms out of the body. The fundamental criterion for mechanical persistence is that the biofilm failure strength exceeds the external applied stress. Mechanical failure of the biofilm and release of planktonic microbial cells is also important in vivo because it can result in dissemination of infection. The fundamental criterion for detachment and dissemination is that the applied stress exceeds the biofilm failure strength. The apparent contradiction for a biofilm to both persist and disseminate is resolved by recognizing that biofilm material properties are inherently heterogeneous. There are also mechanical aspects to the ways that infectious biofilms evade leukocyte phagocytosis. The possibility of alternative therapies for treating biofilm infections that work by reducing biofilm cohesion could (1) allow prevailing hydrodynamic shear to remove biofilm, (2) increase the efficacy of designed interventions for removing biofilms, (3) enable phagocytic engulfment of softened biofilm aggregates, and (4) improve phagocyte mobility and access to biofilm.

The effect of alginate oligosaccharides on the mechanical properties of Gram-negative biofilms

The influence of a novel, safe antibiofilm therapy on the mechanical properties of Pseudomonas aeruginosa and Acinetobacter baumannii biofilms in vitro was characterized. A multiscale approach employing atomic force microscopy (AFM) and rheometry was used to quantify the mechanical disruption of the biofilms by a therapeutic polymer based on a low-molecular weight alginate oligosaccharide (OligoG). AFM demonstrated structural alterations in the biofilms exposed to OligoG, with significantly lower Young's moduli than the untreated biofilms, (149 MPa vs 242 MPa; p < 0.05), a decreased resistance to hydrodynamic shear and an increased surface irregularity (Ra) in the untreated controls (35.2 nm ± 7.6 vs 12.1 nm ± 5.4; p < 0.05). Rheology demonstrated that increasing clinically relevant concentrations of OligoG (<10%) were associated with an increasing phase angle (δ) over a wide range of frequencies (0.1-10 Hz). These results highlight the utility of these techniques for the study of three-dimensional biofilms and for quantifying novel disruption therapies in vitro.

Modelling mechanical characteristics of microbial biofilms by network theory

In this contribution, we present a constitutive model to describe the mechanical behaviour of microbial biofilms based on classical approaches in the continuum theory of polymer networks. Although the model is particularly developed for the well-studied biofilms formed by mucoid Pseudomonas aeruginosa strains, it could easily be adapted to other biofilms. The basic assumption behind the model is that the network of extracellular polymeric substances can be described as a superposition of worm-like chain networks, each connected by transient junctions of a certain lifetime. Several models that were applied to biofilms previously are included in the presented approach as special cases, and for small shear strains, the governing equations are those of four parallel Maxwell elements. Rheological data given in the literature are very adequately captured by the proposed model, and the simulated response for a series of compression tests at large strains is in good qualitative agreement with reported experimental behavior.

Effect of shear stress and growth conditions on detachment and physical properties of biofilms

Detachment is one of the major processes determining the physical structure and microbial functionalities of biofilms. To predict detachment, it is necessary to take the mechanical properties of the biofilm and the effect of both hydrodynamic and growth conditions into account. In this work, experiments were conducted with biofilms developed under various shear stresses and with various substrate natures. In addition, two cases were considered in order to differentiate between the effect of hydrodynamic factors and growth factors: the biofilms were directly grown under the targeted shear stress (τ) condition or they were precultivated under very low shear stress (0.01 Pa) and then exposed to high shear stress in the range of 0.1-13 Pa. An exponential and asymptotic decrease of the biofilm thickness and mass with increasing τ was observed in both cases. On contrary density, expressed as the biofilm dry mass on a known substratum divided by the average thickness increased with τ. Denitrifying biofilms always showed greater thickness and density than oxic biofilms. These results showed the presence of a compact basal layer that resisted shear stresses as high as 13 Pa whatever the culture conditions. Above this basal layer, the cohesion was lower and depended on the shear stress applied during biofilm development. The application of shear stress to the biofilms resulted in both detachment and compression, but detachment prevailed for the upper part of the biofilms and compression prevailed for the basal layers. A model of biofilm structure underlying the stratified character of this aggregate is given in terms of density and cohesion.

Green Chemistry for the Production of Biodegradable Polymers as Solid Substrate and the Formation of Sustainable Biofilm

Conventional plastics derived from the fossil fuels pose a threat to the global environment due to their non-degradable nature. Problems associated with global warming and solid waste management has generated interest in the development of novel plastics. Theses while retaining the desired properties of conventional synthetic plastics must also are degradable. Among the various biodegradable plastic available, there is growing interest in the group of polymers known as polyhydroxyalkanoate (PHA).The present investigation is based on (i) Biodegradation of Bioplastic with biological approaches (ii) Production of cost effective Bioplastic. Cost of bioplastics serves as a hindrance to the development of bioplastics for food and drink packaging as the plastic is produced by harvesting the natural resources thus there is utilization of the agricultural waste and also reduces the overall cost of the product. As in the case of petroleum based plastic production, there is the need of huge sum of energy which consumes the non renewable sources which is getting depleted. Thus, we can conclude that having a cost effective bioplastic in our near future. This plastic will be replacing the commercially available plastic very soon. The bioplastic produced is also degradable. It thus reduces the waste accumulation on the areas surrounding us. It is also suggested that on degradation it does not produces any toxic to the environment and no harmful gas is emitted thus no greenhouse gas and no global warming. This would be an environment friendly product.

Effect of strain rate on the mechanical properties of Staphylococcus epidermidis biofilms

The quantification of biofilm mechanical properties can serve as a basis for understanding biofilm resilience and for developing biofilm control strategies. One aspect of tensile testing that is likely to be important for a viscoelastic material such as bacterial biofilm, but unfortunately is often overlooked (i.e., not controlled or reported), is the strain rate used during testing. Thus, we performed tensile testing on intact S. epidermidis biofilms using the microcantilever method at 12 strain rate values ranging over approximately 3 orders of magnitude (0.013-9.07 s(-1)). Ultimate or cohesive strength, elastic modulus, and toughness increased with increasing strain rate and approached a plateau at approximately 1.3 s(-1). Failure strain, on the other hand, did not exhibit any trend with strain rate. Given that the mean values of some parameters increased by as much as 1 order of magnitude over the strain rate range used in this work, we suggest that the strain rate during tensile testing should be carefully controlled and reported to facilitate comparisons among different studies. Furthermore, the quantitative expressions developed in this work that relate mechanical property values with strain rate may be useful for modeling the deformation of bacterial biofilms under applied loads.

Quantifying the tensile strength of microbial mats grown over noncohesive sediments

Biofilms in marine and fluvial environments can comprise strong bacterial and diatom mats covering large areas of the bed and act to bind sediments. In this case the bed material becomes highly resistant to shear stresses applied by the overlying fluid motion and detachment, when it does occur, is manifest in patches of biofilm of the order cm(2) being entrained into the flow. This article is the first to report tensile test data specific to the centimeter scale using moist biofilm/sediment composite materials; the strain (ε)-stress (σ) relationships permit quantification of the elasticity (Young's modulus, E) and cohesive strength of each specimen. Specifically, we compare the mechanical strength of cyanobacterial biofilm-only samples to that of biofilm cultured over sediment samples (glass beads or natural sands of d ~ 1 mm) for up to 8 weeks. The range of tensile strength (1,288-3,283 Pa) for composite materials was up to three times higher than previous tensile tests conducted at smaller scale on mixed culture biofilm [Ohashi et al. (1999) Water Sci Technol 39:261-268], yet of similar range to cohesive strength values recorded on return activated sludge flocs [RAS; Poppele and Hozalski (2003) J Microbiol Methods 55:607-615]. Composite materials were 3-6 times weaker than biofilm-only samples, indicating that adhesion to sediment grains is weaker than cohesion within the biofilm. Furthermore, in order to relate the tensile test results to the more common in-situ failure of bio-mats due to shear flow, controlled erosion experiments were conducted in a hydraulic flume with live fluid flow. Here, the fluid shear stress causing erosion was 3 orders of magnitude lower than tensile stress; this highlights both the problem of interpreting material properties measured ex-situ and the need for a better mechanistic model of bio-mat detachment.

Hydrodynamic deformation and removal of Staphylococcus epidermidis biofilms treated with urea, chlorhexidine, iron chloride, or DispersinB

The force-deflection and removal characteristics of bacterial biofilm were measured by two different techniques before and after chemical, or enzymatic, treatment. The first technique involved time lapse imaging of a biofilm grown in a capillary flow cell and subjected to a brief shear stress challenge imparted through increased fluid flow. Biofilm removal was determined by calculating the reduction in biofilm area from quantitative analysis of transmission images. The second technique was based on micro-indentation using an atomic force microscope. In both cases, biofilms formed by Staphylococcus epidermidis were exposed to buffer (untreated control), urea, chlorhexidine, iron chloride, or DispersinB. In control experiments, the biofilm exhibited force-deflection responses that were similar before and after the same treatment. The biofilm structure was stable during the post-treatment shear challenge (1% loss). Biofilms treated with chlorhexidine became less deformable after treatment and no increase in biomass removal was seen during the post-treatment shear challenge (2% loss). In contrast, biofilms treated with urea or DispersinB became more deformable and exhibited significant biofilm loss during the post-treatment flow challenge (71% and 40%, respectively). During the treatment soak phase, biofilms exposed to urea swelled. Biofilms exposed to iron chloride showed little difference from the control other than slight contraction during the treatment soak. These observations suggest the following interpretations: (1) chemical or enzymatic treatments, including those that are not frankly antimicrobial, can alter the cohesion of bacterial biofilm; (2) biocidal treatments (e.g., chlorhexidine) do not necessarily weaken the biofilm; and (3) biofilm removal following treatment with agents that make the biofilm more deformable (e.g., urea, DispersinB) depend on interaction between the moving fluid and the biofilm structure. Measurements such as those reported here open the door to development of new technologies for controlling detrimental biofilms by targeting biofilm cohesion rather than killing microorganisms.

Chemical and antimicrobial treatments change the viscoelastic properties of bacterial biofilms

Changes in the viscoelastic material properties of bacterial biofilms resulting from chemical and antimicrobial treatments were measured by rheometry. Colony biofilms of Staphylococcus epidermidis or a mucoid Pseudomonas aeruginosa were subjected to a classical creep test performed using a parallel plate rheometer. Data were fit to the 4-parameter Burger model to quantify the material properties. Biofilms were exposed to the chloride salts of several common mono-, di-, and tri- valent cations, and to urea, industrial biocides, and antibiotics. Many of these treatments resulted in statistically significant alterations in the material properties of the biofilm. Multivalent cations stiffened the P. aeruginosa biofilm, while ciprofloxacin and glutaraldehyde weakened it. Urea, rifampin, and a quaternary ammonium biocide weakened the S. epidermidis biofilm. In general, there was no correspondence between the responses of the two different types of biofilms to a particular treatment. These results underscore the distinction between the killing power of an antimicrobial agent and its ability to alter biofilm mechanical properties and thereby influence biofilm removal. Understanding biofilm rheology and how it is affected by chemical treatment could lead to improvements in biofilm control.