Combination of photocatalytic and membrane distillation hybrid processes for reactive dyes treatment

An overview of wastewater treatment using combined heterogeneous photocatalysis and membrane distillation

The need for efficient remediation solutions to wastewater has risen due to the concerning prevalence of toxic organic pollutants. It is possible for the linked photocatalysis-membrane separation system to concurrently achieve the photoreaction of pollutants and their removal from wastewater in order to accomplish the goal of completely purifying the wastewater. This investigation's objective is to provide analytical overview of the photocatalytic and membrane coupling process, photocatalytic membrane reactors, and the potential applications of these technologies in the treatment of wastewater for the persistent organic matter removal. In the review, an examination of photocatalytic and membrane processes to remove organic compounds from wastewater is presented. Based on the literature analysis, it was observed that the application of photocatalytic membrane reactors is significantly influenced by a wide variety of factors. Some of these factors include pollutant concentration, dissolved oxygen, aeration, pH, and hydraulic retention time. Light intensity is another factor that has a significant influence. It was also revealed how distillation membranes work when integrated with photocatalytic process. This brief overview will help researchers understand how successful coupled photocatalytic and membrane distillation are in the treatment of wastewater containing organic pollutants.

Dynamics of Diffusion- and Immobilization-Limited Photocatalytic Degradation of Dyes by Metal Oxide Nanoparticles in Binary or Ternary Solutions

Photocatalytic degradation employing metal oxides, such as TiO2 nanoparticles, as catalysts is an important technique for the removal of synthetic dyes from wastewater under light irradiation. The basic principles of photocatalysis of dyes, the effects of the intrinsic photoactivity of a catalyst, and the conventional non-fundamental factors are well established. Recently reported photocatalysis studies of dyes in single, binary, and ternary solute solutions opened up a new perspective on competitive photocatalytic degradation of the dyes. There has not been a review on the photocatalytic behavior of binary or ternary solutions of dyes. In this regard, this current review article summarizes the photocatalytic behavior of methylene, rhodamine B, and methyl orange in their binary or ternary solutions. This brief overview introduces the importance of the dynamics of immobilization and reactivity of the dyes, the vital roles of molecular conformation and functional groups on their diffusion onto the catalyst surface, and photocatalytic degradation, and provides an understanding of the simultaneous photocatalytic processes of multiple dyes in aqueous systems.

Catalytic efficiency of raw and hydrolyzed eggshell in the oxidation of crystal violet and dye bathing wastewater by thermally activated peroxide oxidation method

In this study, hydrochar-based-eggshell was prepared via the subcritical water medium (SCWM) and used as a catalyst in the thermally activated peroxide oxidation (TAPO) approach for crystal violet and dye bathing wastewater degradation. The catalytic activities for the raw eggshell (RES) and hydrochar-based-eggshell (HES) were compared. RES and HES were characterized using a scanning electron microscope (SEM),energy-dispersive X-ray spectroscopy (SEM-EDX), and Fourier transforms infrared spectroscopy (FT-IR). The affecting parameters on the degradation process were optimized using response surface methodology (RSM). The effects of temperature (293-333 K), amount of catalyst (5-25 mg/50 mL), the concentration of H₂O₂ (0-8 mM), and treatment time (10-70 min) on the TAPO method were investigated using central composite design (CCD). For the crystal violet removal, two models were developed. Both models were significant and can be used to describe the design space. Also, the dye bathing wastewater degradation was described by another developed model, which had a high correlation coefficient (R² = 0.97). In general, catalytic activity for HES was higher than RES. The degradation of crystal violet reached 98.10% when a 20 mg HES catalyst and 6 mM H₂O₂ at 323 K for 55 min were used. While 97% of the color of dye bathing wastewater was removed in 55 min at 323 K using 25 mg of HES and 4 mM H₂O₂. This study showed that the hydrolyzed eggshells could be used in the oxidation of crystal violet and dye bathing wastewater by the thermally activated peroxide oxidation method.

Nanohybrids-assisted photocatalytic removal of pharmaceutical pollutants to abate their toxicological effects - A review

Advancement in medication by health care sector has undoubtedly improved our life but at the same time increased the chemical burden on our natural ecosystem. The residuals of pharmaceutical products become part of wastewater streams by different sources such as excretion after their usage, inappropriate way of their disposal during production etc. Hence, they are serious health hazards for human, animal, and aquatic lives. Due to rapid urbanization, the increased demand for clean drinking water is a burning global issue. In this regard it is need of the present era to explore efficient materials which could act as photocatalyst for mitigation of pharmaceuticals in wastewater. Nanohybrid as photocatalyst is one of the widely explored class of materials in photocatalytic degradation of such harmful pollutants. Among these nanohybrids; metal based nanohybrids (metals/metal oxides) and carbon based nanohybrids (carbon nanotubes, graphene, fullerenes etc.) have been explored to remove pharmaceutical drugs. Keeping in view the increasing harmful impacts of pharmaceuticals; the sources of pharmaceuticals in wastewater, their health risk factors and their mitigation using efficient nanohybrids as photocatalysts have been discussed in this review.

Photocatalytic membrane reactors for produced water treatment and reuse: Fundamentals, affecting factors, rational design, and evaluation metrics

Treatment and reuse of produced water (PW), the largest wastewater stream generated during oil and gas production, provides a promising option to address the increasing clean water demands. High-performance treatment technologies are needed to efficiently remove the organic and inorganic contaminants in PW for fit-for-purpose applications. Photocatalytic membrane reactor (PMR) is an emerging green technology for removal of organic pollutants, photoreduction of heavy metals, photo-inactivation of bacteria, and resource recovery. This study critically reviewed the mechanisms of photocatalysis and membrane processes in PMR, factors affecting PMR performance, rational design, and evaluation metrics for PW treatment. Specifically, PW characteristics, photocatalysts properties, membranes applied, and operating conditions are of utmost importance for rational design and reliable operation of PMR. PW pretreatment to remove oil and grease, colloidal and suspended solids is necessary to reduce membrane fouling and ensure optimal PMR performance. The metrics to evaluate PMR performance were developed including light utilization, exergetic efficiency, water recovery, product water improvement, lifetime of the photocatalyst, and costs. This review also presented the research gaps and outlook for future research.

Role of Nanotechnology in Photocatalysis

World is facing two major problems, day by day demand of energy and pollution on the planet increasing with the advancement of human activities. These are real problems not only for developing countries but also for developed civilization. Present energy sources are not enough to fulfill the demand of modern world these sources are limited and number of side effects from these. Other major problem pollution that is discussed in this article, very alarming number of population every year affected from pollution and death rate from pollution is very high. In this article, briefly review how photocatalytic technique help us to resolve these problem by environmental friendly, cost effective, less energy consumption and minimum side effect approach. This article cover the main concept about photo-catalysis technique and its related terms. The main feature of efficient photocatalytic activity is selection of photo-catalyst, briefly presentation for which types of nanomaterials are suitable for cost effective and efficient catalytic activity. An overview of application of photocatalytic activity for waste water splitting for H₂ production, waste water treatment and air disinfection, which types of catalyst are for these application and briefly discussed factor affecting the catalytic activity.

Green production of hydrochar nut group from waste materials in subcritical water medium and investigation of their adsorption performance for crystal violet

This study evaluates the production of hydrochars from the outer shells of the nut group (peanut, hazelnut, walnut, and pistachio) in an eco-friendly subcritical water medium (SWM) and their effects as adsorbents on the removal of crystal violet (CV) from an aqueous solution. The prepared hydrochars were characterized using Brunauer Emmett-Teller (BET) analysis, scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), and zeta potential. The adsorption process was optimized based on pH, adsorbent dose, dye concentration, and contact time. The hazelnut hydrochar was found to have the maximum removal efficiency (91%). Optimum conditions were pH of 8, particle size <45 μm, adsorption time of 60 min, and dye concentration of 25 mg/L. The results of all hydrochars were fitted to the second-order kinetics. Langmuir, Freundlich, and Redlich-Peterson isotherms models were used to explain the relationship between adsorbent and adsorbate. For all hydrochars, CV adsorption was found to be feasible and inherently spontaneous. The use of materials with no commercial value like; the outer shells of the nut group, is considered a method for waste reduction using the SWM method. PRACTITIONER POINTS: Hydrochars of nut group were synthesized in the subcritical water medium. Adsorption ability of the hydrochars in the adsorption of crystal violet were investigated. Adsorption isotherms were used to explain the relationship between adsorbent and adsorbate. The hazelnut hydrochar provided the maximum removal efficiency (91%). Hazardous water pollutant effectively removed using an eco-friendly method.

Remazol Brilliant Blue R (RBBR) dye and phosphate adsorption by calcium alginate beads modified with polyethyleneimine

This study concerns the preparation of novel adsorbent prepared from calcium alginate bead modified with polyethyleneimine (PEI-CaAlg). The adsorption capacity of the PEI-CaAlg was examined by Remazol Brilliant Blue R (RBBR) and phosphate adsorption. PEI-CaAlg showed high removal efficiencies for RBBR (90.48%) and phosphate (88.10%). The removal of both RBBR and phosphate onto the PEI-CaAlg followed the Freundlich isotherm and the second-order model. The adsorption was studied in terms of thermodynamic and found to be feasible and spontaneous in nature. The reusability of the modified alginate beads was also examined up to five cycles. The removal efficiency was 90.48% at the first cycle and decreased to 75.15% at the end of the fourth cycle. The adsorption of color and phosphate from real textile wastewater was also instigated. The removal efficiencies for color and phosphate ions reached 80.24% and 90.00%, respectively. Therefore, the prepared PEI-CaAlg can be considered as a novel, eco-friendly, and cost-effective adsorbent for simultaneous dye and phosphate adsorption. PRACTITIONER POINTS: This study aims to modify the surface of calcium alginate beads with polyethyleneimine (PEI). The adsorption of RBBR and phosphate by the modified alginate beads (PEI-CaAlg) was investigated. PEI is an organic polymer with a linear/branch shape, which can increase the active sites on the adsorbent surface. PEI has one nitrogen atom in every three atoms provides a positive charge that can complex with the negatively charged molecules. The adsorption of RBBR and phosphate were carried out onto PEI-CaAlg.

Optimization of the electrochemical oxidation of textile wastewater by graphite electrodes by response surface methodology and artificial neural network

In this study, electrochemical oxidation of combed fabric dyeing wastewater was investigated using graphite electrodes. The response surface methodology (RSM) was used to design the experiments via the central composite design (CCD). The planned experiments were done to track color changes and chemical oxygen demand (COD) removal. The experimental results were used to develop optimization models using RSM and the artificial neural network (ANN) and they were compared. The developed models by the two methods were in good agreement with the experimental results. The optimum conditions were found at 150 A/m², pH 5, and 120 min. The removal efficiencies for color and COD reached 96.6% and 77.69%, respectively. The operating cost at the optimum conditions was also estimated. The energy and the cost of 1 m³ of wastewater required 34.9 kWh and 2.58 US$, respectively. The graphite electrodes can be successfully utilized for treatment of combed fabric dyeing wastewater with reasonable cost.

Synthesis of Gd2O3 Nanoparticles and Their Photocatalytic Activity for Degradation of Azo Dyes

Gadolinium oxide (Gd2O3) nanoparticles were prepared via the reaction of gadolinium nitrate hexahydrate (Gd (NO3)3·6H2O) and ethylamine (C2H5NH2), and their surface morphology, particle size, and properties were examined by using scanning electron microscopy, X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet visible (UV-vis) spectroscopy. The Gd2O3 nanoparticles were used as the photocatalyst for the degradation of various azo dyes, such as methyl orange (MO), acid orange 7 (AO7), and acid yellow 23 (AY23) under irradiation with UV light. The effect of the experimental parameters (initial concentration of azo dyes, dosage of catalyst, and wavelength of UV light) on the photocatalytic properties of the Gd2O3 nanoparticles were investigated. At a constant H2O2 concentration, the photocatalytic degradation efficiency of the Gd2O3 nanoparticles for various azo dyes was in the order: methyl orange > acid orange 7 > acid yellow 23. The kinetics study showed that the photocatalytic degradation of azo dyes was followed by a pseudo first-order reaction rate law.

Preparation of spherical filler-like ZnFe2O4/Bi2MoO6 surrounded by nanosheets and its photocatalytic applications

In this article, the spherical filler-like ZnFe₂O₄/Bi₂MoO₆ (ZFO/BMO) surrounded by nanosheets were synthesized by a solvothermal method using spherical ZnFe₂O₄ as a matrix. Scanning electron microscope (SEM), X-ray diffraction (XRD), Photoluminescence (PL), Fourier transform infrared spectroscopy (FT-IR) and Diffuse reflectance spectra (DRS) were used to characterize the prepared samples. The photocatalytic performance of the material was detected under 420 nm visible light by Rhodamine B (RhB). The degradation results indicated that the ZFO/BMO photocatalyst with 20% ZnFe₂O₄ content (ZFO/BMO-2) demonstrated highly efficient performance. The constructed Z-type ZFO/BMO heterojunction lengthens the visible light absorption threshold and improves the photocatalytic activity. Furthermore, ZFO/BMO heterojunction composite photocatalyst can be recycled effectively by applying an appropriate external magnetic field. It has important research value in photocatalysis and recycling.

Synthesis and characterization of Fe2O3 doped ZnO supported on clinoptilolite for photocatalytic degradation of metronidazole

ZnO/Fe₂O₃/Clinoptilolite photocatalyst was synthesized through sol-gel method. The photocatalyst was characterized by XRD, XRF, EDX, FE-SEM, FT-IR, BET and UV-VIS DRS analyses. According to the XRD, FT-IR, and EDX results, the presence of ZnO and Fe₂O₃ was confirmed on the clinoptilolite surface. Based on the XRF results, the molar ratio of Fe³⁺/ZnO in the photocatalyst was obtained as 0.06. The FE-SEM results confirmed stabilization of ZnO/Fe₂O₃ on the clinoptilolite surface. Based on the BET results, the surface area and pore volume for the photocatalyst were obtained as 291.35 m²/g and 0.23 cm³/g, respectively. According to the UV-VIS DRS results, the band gap energy of the photocatalyst was measured as 3.38 eV. The performance of the synthesized photocatalyst in degrading metronidazole from contaminated water, as one of the most widely used antibiotics in pharmaceutical industries, was evaluated by response surface methodology. Operational factors including pH (4-10), metronidazole concentration (1-100 mg/l), irradiation time (45-180 min), photocatalyst concentration (0.5-2 g/l), and H₂O₂ concentration (25-100 mg/l) were investigated. The optimal values of the factors in degrading 99% of the contaminant were as follows: irradiation time = 90 min, photocatalyst concentration = 1 g/l, pH = 10, H₂O₂ concentration = 40 mg/l, and MNZ concentration = 60 mg/l.

A Mini Review on Antiwetting Studies in Membrane Distillation for Textile Wastewater Treatment

The textile industry is an important contributor to the growth of the global economy. However, a huge quantity of wastewater is generated as a by-product during textile manufacturing, which hinders the ongoing development of textile industry in terms of environmental sustainability. Membrane distillation (MD), which is driven by thermal-induced vapor pressure difference, is being considered as an emerging economically viable technology to treat the textile wastewater for water reuse. So far, massive efforts have been put into new membrane material developments and modifications of the membrane surface. However, membrane wetting, direct feed solution transport through membrane pores leading to the failure of separation, remains as one of the main challenges for the success and potential commercialization of this separation process as textile wastewater contains membrane wetting inducing surfactants. Herein, this review presents current progress on the MD process for textile wastewater treatment with particular focuses on the fundamentals of membrane wetting, types of membranes applied as well as the fabrication or modification of membranes for anti-wetting properties. This article aims at providing insights in membrane design to enhance the MD separation performance towards commercial application of textile wastewater treatment.

Green synthesis of Ag/ZnO microplates by doping Ag ions on basic zinc carbonate for fast photocatalytic degradation of dyes

The Ag/ZnO microplates, composed by various nanoparticles, were facilely synthesized by calcination of the precursor obtained by ion exchanging between zinc carbonate hydroxide [Zn₂(OH)₂CO₃] and silver nitrate (AgNO₃) in a short time. The structures of ZnO and Ag/ZnO were characterized carefully by a series of methods and so on. Especially, the results from the UV-Vis-NIR diffuse reflectance and PL spectra confirmed that the presence of metallic Ag led to the fact that the adsorption of visible light and an increase of separation of electrons and holes in the Ag/ZnO composite. The photocatalytic activities of the Ag/ZnO were 1.5 and nearly 5 times higher that of ZnO for removal of RhB and MB, respectively. We proposed a possible mechanism to explain the enhanced photocatalytic degradation over Ag/ZnO under UV light irradiation. Finally, this work could provide a simple example for the synthesis of metal-semiconductor composite as well as their applications.

Enhanced Degradation of Sulfamethoxazole (SMX) in Toilet Wastewater by Photo-Fenton Reactive Membrane Filtration

Pharmaceutical residuals are increasingly detected in natural waters, which made great threat to the health of the public. This study evaluated the utility of the photo-Fenton ceramic membrane filtration toward the removal and degradation of sulfamethoxazole (SMX) as a model recalcitrant micropollutant. The photo-Fenton catalyst Goethite (α-FeOOH) was coated on planar ceramic membranes as we reported previously. The removal of SMX in both simulated and real toilet wastewater were assessed by filtering the feed solutions with/without H₂O₂ and UV irradiation. The SMX degradation rate reached 87% and 92% respectively in the presence of UV/H₂O₂ for the original toilet wastewater (0.8 ± 0.05 ppb) and toilet wastewater with a spiked SMX concentration of 100 ppb. The mineralization and degradation by-products were both assessed under different degradation conditions to achieve deeper insight into the degradation mechanisms during this photo-Fenton reactive membrane filtration. Results showed that a negligible removal rate (e.g., 3%) of SMX was obtained when only filtering the feed solution through uncoated or catalyst-coated membranes. However, the removal rates of SMX were significantly increased to 67% (no H₂O₂) and 90% (with H₂O₂) under UV irradiation, respectively, confirming that photo-Fenton reactions played the key role in the degradation/mineralization process. The highest apparent quantum yield (AQY) reached up to approximately 27% when the H₂O₂ was 10 mmol·L⁻¹ and UV254 intensity was 100 μW·cm⁻². This study lays the groundwork for reactive membrane filtration to tackle the issues from micropollution.

Kinetic study and performance comparison of TiO2-mediated visible-light-responsive photocatalysts for the inactivation of Aspergillus niger

Fungi are highly survived with exceptional resistance to environmental stress. Conventional fungicides are quite efficient, but the increase in use raises severe environmental problems. In this study, environmentally friendly TiO₂-mediated visible-light-responsive photocatalysts, namely N-TiO₂, N-T-TiO_2, C-TiO₂, and Pd-C-TiO₂, were used to compare the performance of disinfecting a mold fungi Aspergillus niger. Key parameters, including photocatalyst dosage, the initial fungal concentration, and visible-light intensity, affecting the disinfecting process, was investigated. A new developed Light-responsive Modified Hom's (LMH) kinetic model incorporating visible-light intensity and photocatalyst light-absorption coefficient was firstly used to predict such photocatalytic process in fungal inactivation. Among the photocatalysts, Pd-C-TiO₂ showed the highest inactivation performance against fungi, followed by C-TiO₂, N-T-TiO_2, and N-TiO₂. In general, inactivation increased with increasing photocatalyst dosage and light intensity while decreased with increasing initial fungal concentration. For kinetic modeling, the LMH model supports the hypothesis that photocatalyst performance toward visible-light-driven fungal inactivation primarily depends on the light-absorption capacity of the photocatalyst. In conclusion, mold fungi Aspergillus niger are effectively disinfected by TiO₂-mediated visible-light-responsive photocatalysts, and such fungal inactivation process could be predicted by LMH kinetic model.

Overview of Photocatalytic Membrane Reactors in Organic Synthesis, Energy Storage and Environmental Applications

This paper presents an overview of recent reports on photocatalytic membrane reactors (PMRs) in organic synthesis as well as water and wastewater treatment. A brief introduction to slurry PMRs and the systems equipped with photocatalytic membranes (PMs) is given. The methods of PM production are also presented. Moreover, the process parameters affecting the performance of PMRs are characterized. The applications of PMRs in organic synthesis are discussed, including photocatalytic conversion of CO2, synthesis of KA oil by photocatalytic oxidation, conversion of acetophenone to phenylethanol, synthesis of vanillin and phenol, as well as hydrogen production. Furthermore, the configurations and applications of PMRs for removal of organic contaminants from model solutions, natural water and municipal or industrial wastewater are described. It was concluded that PMRs represent a promising green technology; however, before the application in industry, additional studies are still required. These should be aimed at improvement of process efficiency, mainly by development and application of visible light active photocatalysts and novel membranes resistant to the harsh conditions prevailing in these systems.