Comprehensive review on application of edible film on meat and meat products: An eco-friendly approach

Carboxymethyl cellulose-chitosan edible films for food packaging: A review of recent advances

Polysaccharide-based edible films have been widely developed as food packaging materials in response to the rising environmental concerns caused by the extensive use of plastic packaging. In recent years, the integration of carboxymethyl cellulose (CMC) and chitosan (CS) for a binary edible film has received considerable interest because this binary edible film can retain the advantages of both constituents (e.g., the great oxygen barrier ability of CMC and moderate antimicrobial activity of CS) while mitigating their respective disadvantages (e.g., the low water resistance of CMC and poor mechanical strength of CS). This review aims to present the latest advancements in CMC-CS edible films. The preparation methods and properties of CMC-CS edible films are comprehensively introduced. Potential additives and technologies utilized to enhance the properties are discussed. The applications of CMC-CS edible films on food products are summarized. Literature shows that the current preparation methods for CMC-CS edible film are solvent-casting (main) and thermo-mechanical methods. The CMC-CS binary films have superior properties compared to films made from a single constituent. Moreover, some properties, such as physical strength, antibacterial ability, and antioxidant activity, can be greatly enhanced via the incorporation of some bioactive substances (e.g. essential oils and nanomaterials). To date, several applications of CMC-CS edible films in vegetables, fruits, dry foods, dairy products, and meats have been studied. Overall, CMC-CS edible films are highly promising as food packaging materials.

Effects of guar gum/chitosan edible films functionalized with citronellal/HPβCD inclusion complex on Harbin red sausage preservation

Harbin red sausage is a traditional local pork meat product in China, but it is susceptible to microbial contamination and lipid oxidation, leading to quality deterioration. Herein, guar gum (GG)/chitosan (CS) edible films functionalized with citronellal/hydroxypropyl-β-cyclodextrin inclusion complex (CIT/HPβCD-IC) were fabricated for Harbin red sausage preservation. Results demonstrated CIT/HPβCD-IC was successfully prepared and observed by SEM due to the bathochromic shift of maximum absorption peak of CIT, and the formation of new bonds was confirmed by FTIR analysis, suggesting the embedding of CIT into HPβCD cavity. The changes of functional groups stretching vibrations suggested successful loading of CIT/HPβCD-IC into the GG/CS edible films. Furthermore, the incorporation of CIT/HPβCD-IC enhanced the microstructural, mechanical and barrier properties, and improved the antibacterial activities, biodegradability and thermal stability of the GG/CS edible films. Particularly, the GG/CS edible films incorporated with 1 % CIT/HPβCD-IC (GG/CS-IC 1 %) enhanced the storage stability of Harbin red sausage at 4 °C by decreasing the weight loss rate, maintaining the pH, color, and textural stabilities, retarding the microbial growth and lipid oxidation of the sausage samples. Findings here suggested that GG/CS-IC 1 % edible films showed great potential as novel multi-functional edible packaging materials for Harbin red sausage preservation.

Use of sustainable packaging materials for fresh beef vacuum packaging application and product assessment using physicochemical means

Packaging material should guarantee the longest possible shelf life of food and help to maintain its quality. The aim of the study was to assess the physicochemical changes taking place during 28-day ageing of beef steaks packed in two types of multilayer films containing biodegradable polymers - polylactic acid (NAT/PLA) and Mater-Bi® (NAT/MBI). The control group consisted of steaks packed in synthetic polyamide/polyethylene (PA/PE) film. The samples stored in NAT/PLA had significantly lower purge loss than the control samples and the lowest expressible water amount after 14 and 21 days. Following blooming, the most favourable colour was shown in steaks stored in NAT/MBI, with the highest values for the L*, a* and C* parameters and the R630/580 ratio, a high proportion of oxymyoglobin, and the lowest share of metmyoglobin. All steaks, regardless of the type of packaging material, had acceptable tenderness and were stable in terms of lipid oxidation.

A Review of Modified Gelatin: Physicochemical Properties, Modification Methods, and Applications in the Food Field

Gelatin is a significant multifunctional biopolymer that is widely utilized as a component in food, pharmaceuticals, and cosmetics. Numerous functional qualities are displayed by gelatin, such as its exceptional film-forming ability, gelling qualities, foaming and emulsifying qualities, biocompatibility and biodegradable qualities. Due to its unique structural, physicochemical, and biochemical characteristics, which enhance nutritional content and health benefits as well as the stability, consistency, and elasticity of food products, gelatin is utilized extensively in the food business. Additionally, gelatin has demonstrated excellent performance in encapsulating, delivering, and releasing active ingredients. Gelatin's various modifications, such as chemical, enzymatic, and physical processes, were analyzed to assess their impact on gelatin structures and characteristics. Hopefully, gelatin will be more widely used in various applications after modification using suitable methods.

Characteristics of soy films as affected by transglutaminase cross-linking and inclusions of pectin and protein enhancers

Previously, we showed that water extract (soymilk, except pH was increased to 8 from 6.5) of whole soybean could be used directly as a raw material for producing edible soy films by deposition of the film-forming solution (soy extract with enhancers). However, the strength of such soy films needed improvement because they were weak. The purpose of this study was to investigate how transglutaminase (TG) cross-linking reactions and film enhancers, including pectin (low- and high-methoxyl pectin), whey protein isolate (WPI), and soy protein isolate (SPI), improve the physical properties of soy films. Soy films prepared with TG had tensile strength (TS) of 3.01 MPa and puncture strength (PS) of 0.78 MPa, which were higher by as much as 51% and 30% than that of soy films without TG treatment, respectively. Pectin showed significant effects on the mechanical properties of TG-added soy films in terms of TS, PS, and % elongation. On the other hand, only TS and PS were increased by the addition of WPI or SPI. Heat curing had a significant effect on soy film's physical properties. TG treatment significantly reduced film solubility when soaked in water and various levels of acid (vinegar) and base (baking soda) solutions. Under the experimental conditions of 35 unit TG and 28 min of reaction, the degrees of cross-linking were evidenced by the disappearance of individual protein subunits, except the basic subunit of glycinin, and the reduction of 21% of lysine residues of the proteins. HIGHLIGHTS: Edible soy films were made with transglutaminase and about 21% lysine cross-linked. The mechanical strength of soy films was increased by incorporating film enhancers. Transglutaminase enhanced the mechanical properties of soy films.

Chitosan/alginate/pectin biopolymer-based Nanoemulsions for improving the shelf life of refrigerated chicken breast

This study investigated the use of nanoemulsions and various polymer coatings to enhance the quality and shelf life of chicken breast. This comprehensive study explored the antibacterial activity of essential oils (EOs) against Escherichia coli and Staphylococcus aureus, as well as the characterization of nanoemulsions (Nes) and nanoemulsion-based coatings. The antimicrobial potential of EOs, such as cinnamon, tea tree, jojoba, thyme, and black cumin seed oil, was evaluated against microorganisms, and thyme oil exhibited the highest inhibitory effect, followed by cinnamon and tea tree oil by disk diffusion analysis. The MIC and MBC values of EOs were found between 0.16-2.5 mg/mL and 0.16-5 mg/mL, respectively, while thyme EO resulted in the lowest values showing its antimicrobial potential. Then, the essential oil nanoemulsions (EONe) and their coatings, formulated with thyme oil, alginate, chitosan, and pectin, were successfully characterized. Optical microscope observations confirmed the uniform distribution of droplets in all (EONe), while particle size analysis demonstrated multimodal droplet size distributions. The EONe-chitosan coating showed the highest efficacy in reducing cooking loss, while the EONe-chitosan, EONe-alginate, and EONe-pectin coatings displayed promising outcomes in preserving color stability. Microbial analysis revealed the significant inhibitory effects of the EONe-chitosan coating against mesophilic bacteria, psychrophilic bacteria, and yeasts, leading to an extended shelf life of chicken breast. These results suggest the potential application of thyme oil and NE-based coatings in various industries for antimicrobial activity and quality preservation.

Antimicrobial and biocompatibility nature of methanol extract of Lannea coromandelica bark and edible coating film preparation for fruit preservation

This research was performed to evaluate the antimicrobial activity of methanol extract of Lannea coromandelica bark against fruit damage causing microbes such as fungi: Alternaria sp., Aspergillus sp., Botrytis sp., Cladosporium sp., Fusarium sp., Penicillium sp., Phytophthora sp., and Trichoderma sp. The bacteria: such as Chromobacter sp., Enterobacter sp., Erwinia sp., Flavobacterium sp., Lactobacillus sp., Pseudomonas sp., and Xanthomonas sp. was investigated. Furthermore, their biocompatibility nature was determined through animal (rat) model study and their fruit preserving potential was determined by edible coating preparation with chitosan and other substances. Interestingly, the extract showed dose dependent (1000 μg mL-1) activity against these microbes in the following order: Enterobacter sp. (26.4 ± 1.5) > Chromobacter sp. (25.4 ± 1.6) > Pseudomonas sp. (24.5 ± 1.3) > Flavobacterium sp. (24.3 ± 1.4) > Xanthomonas sp. (23.6 ± 1.6) > Erwinia sp. (23.6 ± 1.6) > Lactobacillus sp. (19.6 ± 1.3). Similarly, the antifungal activity was found as Penicillium sp. (32.6 ± 1.3) > Cladosporium sp. (32.6 ± 1.5) > Alternaria sp. (30.3 ± 1.2) > Aspergillus sp. (29.9 ± 1.8) > Botrytis sp. (29.8 ± 1.2) > Fusarium sp. (28.6 ± 1.5) > Trichoderma sp. (19.8 ± 1.4) > Phytophthora sp. (16.2 ± 1.1). The acute toxicity and histopathological study results revealed that the extract possesses biocompatible in nature. The illumination transmittance and active functional groups involved in interaction among test methanol extract and chitosan investigated by UV-vis and Fourier-transform infrared spectroscopy (FTIR) analyses and found average light transmittance and few vital functional groups accountable for optimistic interaction to creak edible coating. Approximately four (set I-IV) treatment sets were prepared, and it was discovered that all of the coated Citrus maxima fruit quality characteristics including total soluble solids (TSS), weight loss (%), pH of fruit pulp juice, and decay percentage were significantly (p>0.05) better than uncoated fruit.

A critical review on biodegradable food packaging for meat: Materials, sustainability, regulations, and perspectives in the EU

The development of biodegradable packaging is a challenge, as conventional plastics have many advantages in terms of high flexibility, transparency, low cost, strong mechanical characteristics, and high resistance to heat compared with most biodegradable plastics. The quality of biodegradable materials and the research needed for their improvement for meat packaging were critically evaluated in this study. In terms of sustainability, biodegradable packagings are more sustainable than conventional plastics; however, most of them contain unsustainable chemical additives. Cellulose showed a high potential for meat preservation due to high moisture control. Polyhydroxyalkanoates and polylactic acid (PLA) are renewable materials that have been recently introduced to the market, but their application in meat products is still limited. To be classified as an edible film, the mechanical properties and acceptable control over gas and moisture exchange need to be improved. PLA and cellulose-based films possess the advantage of protection against oxygen and water permeation; however, the addition of functional substances plays an important role in their effects on the foods. Furthermore, the use of packaging materials is increasing due to consumer demand for natural high-quality food packaging that serves functions such as extended shelf-life and contamination protection. To support the importance moving toward biodegradable packaging for meat, this review presented novel perspectives regarding ecological impacts, commercial status, and consumer perspectives. Those aspects are then evaluated with the specific consideration of regulations and perspective in the European Union (EU) for employing renewable and ecological meat packaging materials. This review also helps to highlight the situation regarding biodegradable food packaging for meat in the EU specifically.

Recent advances in the preservation of postharvest fruits using edible films and coatings: A comprehensive review

In recent years, there has been considerable growth in the creation of edible films and coatings, which is predicted to have a major impact on fruit quality in the coming years. Consumers want fresh fruits that are pesticide-free, good quality, high nutritional value, and a long shelf life. The use of edible coatings and films on fruits is an environmentally dependable approach to a creative solution to this problem. The application, recent trends, and views of coatings and edible films, as well as their impact on fruit quality, are presented in this article, along with a knowledge of their key roles and benefits. According to numerous studies, natural polymers are highly suited for use as packaging material for fresh fruits and can often be a viable alternative to synthetic chemicals. Plasticisers, surfactants, cross-linkers, antimicrobial agents, functional additives, nanoparticles, and fruit and vegetable residues can be used to alter the properties of edible coatings.

Opuntia ficus indica mucilage coatings regulate cell wall softening enzymes and delay the ripening of banana fruit stored at retail conditions

Rapid ripening and softening due to cell wall polysaccharide degradation and disassembly pose major challenges in extending fruit storability. This study aimed to examine the efficacy of Opuntia ficus indica mucilage (OFIM) edible coating in minimizing softening in bananas under retail conditions. Mucilage was extracted from freshly harvested prickly pear cladodes and dried into a powder. Phenolic compounds in OFIM powder were quantified using liquid chromatography-mass spectrometry (LC-MS). OFIM concentrations (1, 2 and 3 % (w/v)) were prepared, and their physicochemical properties were examined. The prepared coatings were applied to harvested banana fruit by dipping and stored at room temperature for 12 days. During the experiment, several parameters were measured, including fruit weight loss, total soluble solids (TSS), titratable acidity (TA), peel color, pulp firmness, ethylene production, respiration rate, ion leakage, malondialdehyde (MDA) content, total chlorophyll and carotenoids, chlorophyll-degrading enzymes, protopectin content and water-soluble pectin (WSP) and softening-related enzymes in the peel. Results showed that mucilage treatments effectively delayed cell wall and chlorophyll degradation, as well as carotenoid accumulation, thus inhibiting ripening-associated processes compared to control fruit. OFIM-treated fruit exhibited significantly higher firmness, chlorophyll content, and TA, lower TSS content, ethylene production, respiration rate, MDA concentration, ion leakage and protopectin content than uncoated fruit. This suggests that OFIM edible coating has the potential to maintain quality and extend the shelf life of bananas by suppressing softening enzymes during storage.

Advanced review on type II collagen and peptide: preparation, functional activities and food industry application

Type II collagen is a homologous super-helical structure consisting of three identical α1(II) chains. It is a major component of animal cartilage, and is widely used in the food industry. Type II collagen can be extracted by acids, salts, enzymes, and via auxiliary methods and can be further hydrolyzed chemically and enzymatically to produce collagen peptides. Recent studies have shown that type II collagen and its polypeptides have good self-assembly properties and important biological activities, such as maintaining cartilage tissue integrity, inducing immune tolerance, stimulating chondrocyte growth and redifferentiation, and providing antioxidant benefits. This review focuses specifically on type II collagen and describes its structure, extraction, and purification, as well as the preparation of type II collagen peptides. In particular, the self-assembly properties and functional activities of type II collagen and collagen peptides are reviewed. In addition, recent research advances in the application of type II collagen and collagen peptides in functional foods, food additives, food coating materials, edible films, and carriers for the food industry are presented. This paper provides more detailed and comprehensive information on type II collagen and peptide for their application.

Recent insights into Nanoemulsions: Their preparation, properties and applications

The ever-increasing demand for healthy diet by consumers has prompted the research adopting cutting-edge methods that can maintain the quality of fruits and vegetables without the use of preservatives. Emulsion based coating approach has been regarded as a viable way to extend the shelf life of fresh produce. New opportunities are being created in a number of industries, (medicines, cosmetics and food) because of new advancements in the developing field of nanoemulsions. Nanoemulsion based methods are efficient for encapsulating the active ingredients including antioxidants, lipids, vitamins and antimicrobial agents owing to the small droplet size, stability and improved biological activity. This review provides an overview of recent developments in preserving the quality and safety of fresh-cut fruits & vegetables with nanoemulsion as a carrier of functional compounds (antimicrobial agents, antibrowning/antioxidants and texture enhancers). In addition, material and methods used for fabrication of the nanoemulsion is also described in this review. In addition, material and methods used for fabrication, of the nanoemulsion is also present.

Edible Film Casting Techniques and Materials and Their Utilization for Meat-Based Product Packaging

According to a profusion of academic studies on the use of organic materials or biopolymers as key components, the current trajectory of food packaging techniques is showing a positive inclination. Notably, one such biopolymer that has attracted much attention is edible film. The biopolymers that have been stated as constitutive components are composed of polysaccharides, lipids, proteins, or a combination of these, which work together to reinforce one another's properties and create homogenous mixtures. An edible film provides a clear, thin layer that encases foodstuffs, including their packaging. The production and use of edible film have recently been the focus of much research in the field of food polymers. Extending the shelf life of food goods is the goal of this research. Given their great susceptibility to change brought on by outside forces or pollutants, which may result in oxidative rancidity, the proper storage of nutrient-dense food items, particularly meat products, deserves careful study. Many edible films have been found to contain active ingredients, such antimicrobials or antioxidants, that can successfully prevent the spoiling of meat products, a process that can happen in a short amount of time. Surprisingly, a number of scholarly examinations reveal that edible film may be cooked alongside meat because of its organic makeup. We hope that the use of edible film will lead to a more environmentally responsible method of food packaging than has previously been possible.

Antimicrobial and Antioxidant Edible Films and Coatings in the Shelf-Life Improvement of Chicken Meat

Meat deterioration during processing, distribution, and display can compromise the quality and safety of products, causing several undesirable changes and decreasing products' shelf-life, which has a negative impact on the industry and consumers. In recent years, studies have been carried out using decontamination techniques and new packaging methodologies to overcome deterioration problems, increase sustainability, and reduce waste. Edible films and coatings obtained from biopolymers such as polysaccharides, proteins, and lipids, combined with active compounds, can be an alternative approach. This article focused on recent studies that used alternative biodegradable polymeric matrices in conjunction with natural compounds with antioxidant/antimicrobial activity on chicken meat. Its impact on physicochemical, microbiological, and sensory characteristics was evident, as well as the effect on its shelf-life. In general, different combinations of active edible films or coatings had a positive effect on the chicken meat. Different studies reported that the main results were a decrease in microbial growth and pathogen survival, a slowdown in lipid oxidation evolution, and an improvement in sensory quality and shelf-life (an increase from 4 to 12 days).

Nano-chitin: Preparation strategies and food biopolymer film reinforcement and applications

Current trends in food packaging systems are toward biodegradable polymer materials, especially the food biopolymer films made from polysaccharides and proteins, but they are limited by mechanical strength and barrier properties. Nano-chitin has great economic value as a highly efficient functional and reinforcing material. The combination of nano-chitin and food biopolymers offers good opportunities to prepare biodegradable packaging films with enhanced physicochemical and functional properties. This review aims to give the latest advances in nano-chitin preparation strategies and its uses in food biopolymer film reinforcement and applications. The first part systematically introduces various preparation methods for nano-chitin, including chitin nanofibers (ChNFs) and chitin nanocrystals (ChNCs). The nano-chitin reinforced biodegradable films based on food biopolymers, such as polysaccharides and proteins, are described in the second part. The last part provides an overview of the current applications of nano-chitin reinforced food biopolymer films in the food industry.

Gelatin/carboxymethyl cellulose edible films: modification of physical properties by different hydrocolloids and application in beef preservation in combination with shallot waste powder

In this work, a gelatin/carboxymethyl cellulose (CMC) base formulation was first modified by using different hydrocolloids like oxidized starch (1404), hydroxypropyl starch (1440), locust bean gum, xanthan gum, and guar gum. The properties of modified films were characterized using SEM, FT-IR, XRD and TGA-DSC before selecting of best-modified film for further development with shallot waste powder. SEM images showed that the rough or heterogeneous surface of the base was changed to more even and smooth depending on the hydrocolloids used while FTIR results demonstrated that a new NCO functional group non-existent in the base formulation was found for most of the modified films, implying that the modification led to the formation of this functional group. Compared to other hydrocolloids, the addition of guar gum into the gelatin/CMC base has improved its properties such as better color appearance, higher stability, and less weight loss during thermal degradation, and had minimal effect on the structure of resulting films. Subsequently, the incorporation of spray-dried shallot peel powder into gelatin/CMC/guar gum was conducted to investigate the applicability of edible films in the preservation of raw beef. Antibacterial activity assays revealed that the films can inhibit and kill both Gram-positive and Gram-negative bacteria as well as fungi. It is noteworthy that the addition of 0.5% shallot powder not only effectively decelerated the microbial growth but also destroyed E. coli during 11 days of storage (2.8 log CFU g-1) and the bacterial count was even lower than that of uncoated raw beef on day 0 (3.3 log CFU g-1).

Development of pullulan-based nanocomposite films reinforced with starch nanocrystals for the preservation of fresh beef

BACKGROUND

Incorporation of polysaccharide-based nanofillers is an effective strategy to fabricate bio-nanocomposite films with preferable mechanical, barrier, and surface hydrophobicity properties compared to pure biopolymer films. The objective of this research is to investigate the influence of starch nanocrystals obtained from native (NSNC) and waxy rice starch (WSNC) on the physical-chemical properties of pullulan-based nanocomposite films and their preservation performance on fresh beef.

RESULTS

Continuous SNCs network structure was observed for pullulan-10% SNCs nanocomposite films, whereas the percolation network of SNCs was destroyed and became no longer continuous with increasing SNCs concentration up to 20% in pullulan films. Among the tested films, pullulan-10% SNCs films showed the highest TS values, lowest WVP and OTR values, due to the formation of percolating SNCs network in pullulan matrix. It is noteworthy that the WVP and OTR values of pullulan-10% WSNC films were significantly lower than that of pullulan-10% NSNC films, probably due to higher hydrophobicity and crystallinity of WSNC compared with NSNC. Beef pieces coated with pullulan-SNCs films had higher L^* and a^* values, lower TVB-N, TBARS, and TVC values during 7 days' storage at 4 °C compared with samples coated with pullulan films.

CONCLUSION

Pullulan-SNCs nanocomposite films, especially pullulan-WSNC films, could be potentially used as a coating material for fresh beef due to their desirable oxygen and water barrier properties. © 2022 Society of Chemical Industry.

Impact of adding prebiotics and probiotics on the characteristics of edible films and coatings- a review

Nowadays, conventional packaging materials made using non-renewable sources are being replaced by more sustainable alternatives such as natural biopolymers (proteins, polysaccharides, and lipids). Within edible packaging, one can differentiate between edible films or coatings. This packaging can be additivated with bioactive compounds to develop functional food packaging, capable of improving the consumer's state of health. Among the bioactive compounds that can be added are probiotics and prebiotics. This review novelty highlighted recent research on edible films and coatings additivated with probiotics and prebiotics, the interactions between them and the matrix and the changes in their physic, chemical and mechanical properties. When bioactive compounds are added, critical factors must be considered when selecting the most suitable production processes. Particularly, as probiotics are living microorganisms, they are more sensitive to certain factors, such as pH or temperature, while prebiotic compounds are less problematic. The interactions that occur inside the matrix can be divided into two main groups: covalent bonding (-NH₂, -NHR, -OH, -CO₂H, etc) and non-covalent interactions (van der Waals forces, hydrogen bonding, hydrophobic and electrostatic interactions). When probiotics and prebiotics are added, covalent and non-covalent interactions are modified. The physical and mechanical properties of films and coatings depend directly on the interactions that take place between the biopolymers that form their matrix. Greater knowledge about the influence of these compounds on the interactions that occur inside the matrix will allow better control of these properties and better understanding of the behaviour of edible packaging additivated with probiotics and prebiotics.

Effects of the geometry of reinforcement on physical properties of sodium caseinate/TiO2 nanocomposite films for applications in food packaging

Plastic materials for food packaging are being replaced by biodegradable films based on biopolymers due to the adverse effects they have had on animal life and the environment. In this study, nanocomposite films containing 2.5 wt% sodium caseinate and 2 wt% glycerol were reinforced with 0.1 or 0.2 wt% nano TiO₂ prepared in two forms: spheres (P25) and tubes. The effects of nanoreinforcement geometry on mechanical, tensile, barrier, thermogravimetric, and optical properties, and distribution of nanoparticles were described. The interactions among film components were analyzed by Fourier transform infrared spectroscopy (FTIR). Addition of nanotubes significantly increased E' (341 wt%) and E" (395 wt%) moduli, the Young modulus E (660 wt%), the residual mass at 500°C (38 wt%), and color change (6.78) compared to control film. The compositional mapping studies showed that P25 nanoparticles were homogeneously distributed between the surfaces of the film while nanotubes were found on the bottom surface. The changes in position of the FTIR spectra signals as compared to pure protein signals indicated strong matrix/reinforcement interactions. In addition, the changes in intensity in 1100, 1033, and 1638 cm^-1 FTIR signals suggested formation of a protein/Tween 20 ester. The geometry of reinforcement was highly relevant regarding physical properties, showing nanotubes as being very successful for enhancing tensile properties.

Biopolymer Food Packaging Films Incorporated with Essential Oils

Petroleum-based packaging materials are typically nonbiodegradable, which leads to significant adverse environmental and health issues. Therefore, developing novel efficient, biodegradable, and nontoxic food packaging film materials has attracted increasing attention from researchers. Due to significant research and advanced technology, synthetic additives in packaging materials are progressively replaced with natural substances such as essential oils (EOs). EOs demonstrate favorable antioxidant and antibacterial properties, which would be an economical and effective alternative to synthetic additives. This review summarized the possible antioxidant and antimicrobial mechanisms of various EOs. We analyzed the properties and performance of food packaging films based on various biopolymers incorporated with EOs. The progress in intelligent packaging materials has been discussed as a prospect of food packaging materials. Finally, the current challenges regarding the practical application of EOs-containing biopolymer films in food packaging and areas of future research have been summarized.

Edible films/coatings containing bioactive ingredients with micro/nano encapsulation: A comprehensive review of their fabrications, formulas, multifunctionality and applications in food packaging

Due to the consumer's pursuit of safe, nontoxic and nutritious foods, edible and/or biodegradable materials have stood out in food packaging and preservation. In this context, the preparation and application of micro/nano encapsulated active ingredients (M/N-E-BAIs) represent a step toward reinforcing the properties of sustainable and controllable food packaging, particularly for the successful incorporation of new substances and functionalities into traditional edible films/coatings. This review, from the preparation of M/N-E-BAIs, the fabrication of edible film/coating containing M/N-E-BAIs to their characterization of multifunction and the application in food, makes a systematic summary and in-depth discussion. Food-grade polymers can encapsulate bioactive ingredients (BAIs) by chemical, physicochemical and mechanical methods, thereby forming M/N-E-BAIs with suitable sustained-release and unique biological activities. Furthermore, M/N-E-BAIs is incorporated into biopolymer substrates by solvent casting, 3D printing or electrostatic spinning to obtain novel edible films/coatings. This advanced packaging material exhibits superior physicochemical and functional properties over traditional food films/coatings. Besides, their applications in foods as active and intelligent packaging can improve food quality, prolong shelf life and monitor food corruption. Even so, there are still many challenges and limitations in formulation, preparation and application of this new packaging technology that need to be addressed in the future.

The Caucasian Whortleberry Extract/Myrtle Essential Oil Loaded Active Films: Physicochemical Properties and Effects on Quality Parameters of Wrapped Turkey Breast Meat

In this research work, the effects of myrtle essential oil (MEO) and Caucasian whortleberry extract (CWE) as natural additives were investigated on mechanical, physico-mechanical and antimicrobial properties of gellan/polyvinyl alcohol (G/PVA) film. Then, optimal blend active films were used for the wrapping of turkey breast meat stored at low temperature (4 ± 1 °C) for 15 days and chemical and sensory properties of wrapped meats were evaluated. The addition of MEO and CWE decreased tensile strength and increased the strain at the break of the films (p ≤ 0.05). Additionally, with increasing the amount of MEO and CWE, the permeability to water vapor (WVP) and the moisture content (MC) of the films decreased (p ≤ 0.05). MIC test showed that MEO and CWE were effective against S. aureus, E. coli, S. typhimurium, and P. fluorescens. at the concentrations of 5-6 and 15-17 mg/mL, respectively. Different microbiological, chemical, and sensory tests indicated that active films significantly enhanced the shelf life of turkey breast meat (p ≤ 0.05). Therefore, based on our finding in this study, the use of these active and biodegradable packagings can be effective and useful for protecting the microbial and sensory quality of turkey breast meat.

Structure and properties of gelatin edible film modified using oxidized poly(2-hydroxyethyl acrylate) with multiple aldehyde groups

BACKGROUND

Pure gelatin film usually exhibits characteristics of being brittle and hydrophilic, which limit its wide use in food packing fields. In this study gelatin/oxidized poly(2-hydroxyethylacrylate) (G/OP) composite films were prepared using casting techniques, the aim of this research was to investigate the effects of OP on the structures and properties of the G/OP composite films.

RESULTS

The Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy results indicated that the G/OP films retained their original secondary structure and random coiled conformation. However, the surface and cross-sectional morphologies of the G/OP films were rougher than those of pure gelatin films, cracks and agglomerates appeared with increasing OP dosage. The remarkable transparency of the G/OP film at 280 nm indicated excellent ultraviolet (UV) light barrier properties of the film, which inhibited UV-light-induced food oxidation. Moreover, the addition of OP decreased the water content and water solubility and considerably increased the water contact angle of pure gelatin films from 78.8° to 116.2° (a maximum increase of 37.5°). This suggested that OP modification improved the hydrophobicity of gelatin films. Furthermore, the inclusion of OP significantly promoted the flexibility of gelatin films, thereby improving their brittleness.

CONCLUSIONS

The UV light barrier properties, hydrophobicity, and flexibility of gelatin films were improved via OP modification, thus the produced G/OP composite films have the potential to be used in food packaging. © 2022 Society of Chemical Industry.

pH-Responsive Color Indicator of Saffron (Crocus sativus L.) Anthocyanin-Activated Salep Mucilage Edible Film for Real-Time Monitoring of Fish Fillet Freshness

Researchers have been focusing increasingly on preparing innovative packaging films made from renewable and biodegradable materials in recent years. This research set out to fabricate and analyze pH-sensitive edible films based on salep mucilage combined with anthocyanin from saffron (Crocus sativus L.) (SAAs). A casting technique was developed with varying concentrations of SAAs (0, 2.5, 5, 7.5, and 10%v/v) pH-sensitive edible films. The surface morphology, physicochemical, barrier, and mechanical properties, as well as the pH sensitivity of films, were investigated. The results showed SAAs increased thickness, water solubility, moisture content, and oxygen permeability (O2P) up to 199.03 µm, 63.71%, 14.13%, and 47.73 (cm3 µm m−2 day−1 kPa−1), respectively, of the pH-sensitive salep mucilage edible indicator films. As expected, the SAAs concentration from 0% to 10%v/v decreased tensile strength, transparency, and contact angle to 11.94 MPa, 14.27%, and 54.02°, respectively. Although achieving the highest elongation at the break (108%) and the lowest water vapor permeability (WVP) (1.39 g s−1 m−1 Pa−1 × 10−11), the pH-sensitive edible indicator film containing 5 %v/v of SAAs showed the best results. An investigation of pH sensitivity revealed that the solution’s pH variation altered the SAAs color. When the pH was raised from 3 to 11, the SAAs’ color shifted from pink to brown. The SAAs-halochromic salep mucilage edible indicator film was employed as a label in an experiment to track the degradation of fish fillets stored at 4 °C, revealing that the halochromic indicator changed color from yellow to brown as the fish was stored. Our findings show that SAAs-loaded salep mucilage indicator films help monitor real-time food deterioration.

The Green Era of Food Packaging: General Considerations and New Trends

Recently, academic research and industries have gained awareness about the economic, environmental, and social impacts of conventional plastic packaging and its disposal. This consciousness has oriented efforts towards more sustainable materials such as biopolymers, paving the way for the “green era” of food packaging. This review provides a schematic overview about polymers and blends of them, which are emerging as promising alternatives to conventional plastics. Focus was dedicated to biopolymers from renewable sources and their applications to produce sustainable, active packaging with antimicrobial and antioxidant properties. In particular, the incorporation of plant extracts, food-waste derivatives, and nano-sized materials to produce bio-based active packaging with enhanced technical performances was investigated. According to recent studies, bio-based active packaging enriched with natural-based compounds has the potential to replace petroleum-derived materials. Based on molecular composition, the natural compounds can diversely interact with the native structure of the packaging materials, modulating their barriers, optical and mechanical performances, and conferring them antioxidant and antimicrobial properties. Overall, the recent academic findings could lead to a breakthrough in the field of food packaging, opening the gates to a new generation of packaging solutions which will be sustainable, customised, and green.

Potential Food and Nutraceutical Applications of Alginate: A Review

Alginate is an acidic polysaccharide mainly extracted from kelp or sargassum, which comprises 40% of the dry weight of algae. It is a linear polymer consisting of β-D-mannuronic acid (M) and α-L-guluronic acid (G) with 1,4-glycosidic linkages, possessing various applications in the food and nutraceutical industries due to its unique physicochemical properties and health benefits. Additionally, alginate is able to form a gel matrix in the presence of Ca²⁺ ions. Alginate properties also affect its gelation, including its structure and experimental conditions such as pH, temperature, crosslinker concentration, residence time and ionic strength. These features of this polysaccharide have been widely used in the food industry, including in food gels, controlled-release systems and film packaging. This review comprehensively covers the analysis of alginate and discussed the potential applications of alginate in the food industry and nutraceuticals.

Active edible films with plant extracts: a updated review of their types, preparations, reinforcing properties, and applications in muscle foods packaging and preservation

Currently, edible films have been increasingly explored to solve muscle food spoilage during storage, especially through the incorporation of plant extracts to develop edible packaging materials. Natural polymers matrices with plant extracts are befitting for fabricating edible films by casting methods. In the films system, the structure and physicochemical properties were strengthened via chemical interactions between active molecules in plant extracts and the reactive groups in the polymer chain. The antibacterial and antioxidant properties were dramatically reinforced through both physical and chemical actions of the plant extracts. Additionally, edible films imbedded with color-rich plant extracts could be considered as potential sensitive indicators to monitor the spoilage degree of muscle foods in response to change in gas or temperature. Furthermore, these films could increase sensory acceptability, improve quality and prolong the shelf life of muscle foods. In this article, the types, preparation methods and reinforcing properties of the edible films with plant extracts were discussed. Also, the applications of these films were summarized on quality maintenance and shelf-life extension and intelligent monitoring in muscle foods. Finally, a novel technology for film preparation achieving high-stability and sustained release of active compounds will become an underlying trend for application in muscle food packaging.

Innovative Food Packaging, Food Quality and Safety, and Consumer Perspectives

Packaging is an integral part of the food industry associated with food quality and safety including food shelf life, and communications from the marketing perspective. Traditional food packaging provides the protection of food from damage and storage of food products until being consumed. Packaging also presents branding and nutritional information and promotes marketing. Over the past decades, plastic films were employed as a barrier to keep food stuffs safe from heat, moisture, microorganisms, dust, and dirt particles. Recent advancements have incorporated additional functionalities in barrier films to enhance the shelf life of food, such as active packaging and intelligent packaging. In addition, consumer perception has influences on packaging materials and designs. The current trend of consumers pursuing environmental-friendly packaging is increased. With the progress of applied technologies in the food sector, sustainable packaging has been emerging in response to consumer preferences and environmental obligations. This paper reviews the importance of food packaging in relation to food quality and safety; the development and applications of advanced smart, active, and intelligent packaging systems, and the properties of an oxygen barrier. The advantages and disadvantages of these packaging are discussed. Consumer perceptions regarding environmental-friendly packaging that could be applied in the food industry are also discussed.

Polysaccharide-Based Edible Films Incorporated with Essential Oil Nanoemulsions: Physico-Chemical, Mechanical Properties and Its Application in Food Preservation-A Review

Edible films with essential oils (EOs) are becoming increasingly popular as an alternative to synthetic packaging due to their environmentally friendly properties and ability as carriers of active compounds. However, the required amounts of EOs to impart effective antimicrobial properties generally exceed the organoleptic acceptance levels. However, by nanoemulsifying EOs, it is possible to increase their antimicrobial activity while reducing the amount required. This review provides an overview of the physico-chemical and mechanical properties of polysaccharide-based edible films incorporated with EOs nanoemulsions and of their application to the preservation of different food types. By incorporating EOs nanoemulsions into the packaging matrix, these edible films can help to extend the shelf-life of food products while also improving the quality and safety of the food product during storage. It can be concluded that these edible films have the potential to be used in the food industry as a green, sustainable, and biodegradable method for perishable foods preservation.

Effects of Chitosan and Duck Fat-Based Emulsion Coatings on the Quality Characteristics of Chicken Meat during Storage

Chicken meat is a popular food commodity that is widely consumed worldwide. However, the shelf-life or quality maintenance of chicken meat is a major concern for industries because of spoilage by microbial growth. The aim of this study was to evaluate the effects of chitosan and duck fat-based emulsion coatings on the quality characteristics and microbial stability of chicken meat during refrigerated storage. The coated chicken meat samples were as follows: control (non-coated), DFC0 (coated with duck fat), DFC0.5 (coated with duck fat and 0.5% chitosan), DFC1 (coated with duck fat and 1% chitosan), DFC2 (coated with duck fat and 2% chitosan), and SOC2 (coated with soybean oil and 2% chitosan). The results showed that the apparent viscosity and coating rate were higher in DFC2 than in other groups. Physicochemical parameters (pH, color, and Warner-Bratzler shear force) were better in DFC2 than those in other groups during 15 days of storage. Moreover, DFC2 delayed lipid oxidation, protein deterioration, and growth of microorganisms during storage. These data suggest that chitosan-supplemented duck fat-based emulsion coating could be used to maintain the quality of raw chicken meat during refrigerated storage.

Green Coating Polymers in Meat Preservation

Edible coatings, including green polymers are used frequently in the food industry to improve and preserve the quality of foods. Green polymers are defined as biodegradable polymers from biomass resources or synthetic routes and microbial origin that are formed by mono- or multilayer structures. They are used to improve the technological properties without compromising the food quality, even with the purpose of inhibiting lipid oxidation or reducing metmyoglobin formation in fresh meat, thereby contributing to the final sensory attributes of the food and meat products. Green polymers can also serve as nutrient-delivery carriers in meat and meat products. This review focuses on various types of bio-based biodegradable polymers and their preparation techniques and applications in meat preservation as a part of active and smart packaging. It also outlines the impact of biodegradable polymer films or coatings reinforced with fillers, either natural or synthesized, via the green route in enhancing the physicochemical, mechanical, antimicrobial, and antioxidant properties for extending shelf-life. The interaction of the package with meat contact surfaces and the advanced polymer composite sensors for meat toxicity detection are further considered and discussed. In addition, this review addresses the research gaps and challenges of the current packaging systems, including coatings where green polymers are used. Coatings from renewable resources are seen as an emerging technology that is worthy of further investigation toward sustainable packaging of food and meat products.

Strategies to increase the shelf life of meat and meat products with phenolic compounds

Oxidative reactions and microbial growth are the main processes involved in the loss of quality in meat products. Although the use of additives to improve the shelf life is a common practice in the meat industry, the current trends among consumers are pushing the researchers and professionals of the meat industry to reformulate meat products. Polyphenols are compounds with antioxidant and antimicrobial activity naturally found in several plants, fruits, and vegetables that can be used in the production of extracts and components in active packaging to improve the shelf life of meat products. This chapter aims to discuss the advances in terms of (1) encapsulation techniques to protect phenolic compounds; (2) production of active and edible packages rich on phenolic compounds; (3) use of phenolic-rich additives (free or encapsulated form) with non-thermal technologies to improve the shelf life of meat products; and (4) use of active packaging rich on phenolic compounds on meat products. Innovative strategies to encapsulated polyphenols and produce films are mainly centered in the use of innovative and emerging technologies (such as ultrasound and supercritical fluids). Moreover, the combined use of polyphenols and non-thermal technologies is a relevant approach to improve the shelf life of meat products, especially using high pressure processing. In terms of application of innovative films, nanomaterials have been largely explored and indicated as relevant strategy to preserve meat and meat products.

Novel Bio-Based Materials and Applications in Antimicrobial Food Packaging: Recent Advances and Future Trends

Food microbial contamination not only poses the problems of food insecurity and economic loss, but also contributes to food waste, which is another global environmental problem. Therefore, effective packaging is a compelling obstacle for shielding food items from outside contaminants and maintaining its quality. Traditionally, food is packaged with plastic that is rarely recyclable, negatively impacting the environment. Bio-based materials have attracted widespread attention for food packaging applications since they are biodegradable, renewable, and have a low carbon footprint. They provide a great opportunity to reduce the extensive use of fossil fuels and develop food packaging materials with good properties, addressing environmental problems and contributing significantly to sustainable development. Presently, the developments in food chemistry, technology, and biotechnology have allowed us to fine-tune new methodologies useful for addressing major safety and environmental concerns regarding packaging materials. This review presents a comprehensive overview of the development and potential for application of new bio-based materials from different sources in antimicrobial food packaging, including carbohydrate (polysaccharide)-based materials, protein-based materials, lipid-based materials, antibacterial agents, and bio-based composites, which can solve the issues of both environmental impact and prevent foodborne pathogens and spoilage microorganisms. In addition, future trends are discussed, as well as the antimicrobial compounds incorporated in packaging materials such as nanoparticles (NPs), nanofillers (NFs), and bio-nanocomposites.