The oxidative stability of omega-3 oil-in-water nanoemulsion systems suitable for functional food enrichment: A systematic review of the literature

Protective Effect of IgY Embedded in W/O/W Emulsion on LPS Enteritis-Induced Colonic Injury in Mice

Chicken yolk immunoglobulin (IgY), an immunologically active component, is used as an alternative to antibiotics for the treatment of enteritis. In this study, IgY was embedded in a W/O/W emulsion to overcome the digestive barrier and to investigate the protective effect of IgY against LPS-induced enteritis in mice. Four different hydrophilic emulsifiers (T80, PC, SC, and WPI) were selected to prepare separate W/O/W emulsions for encapsulating IgY. The results showed that the IgY-embedded double emulsion in the WPI group was the most effective. IgY embedded in the W/O/W emulsion could reduce the damage of LPS to the mouse intestine and prevent LPS-induced intestinal mucosal damage in mice. It increased the number of cup cells, promoted the expression of Muc2, and increased the mRNA expression levels of KLF3, TFF3, Itln1, and Ang4 (p < 0.05). It also enhanced the antioxidant capacity of the colon tissue, reduced the level of inflammatory factors in the colon tissue, and protected the integrity of the colon tissue. Stable embedding of IgY could be achieved using the W/O/W emulsion. In addition, the IgY-embedded W/O/W emulsion can be used as a dietary supplement to protect against LPS-induced enteritis in mice.

Advances in encapsulation systems of Antarctic krill oil: From extraction to encapsulation, and future direction

Antarctic krill oil (AKO) is highly sought after by consumers and the food industry due to its richness in a variety of nutrients and physiological activities. However, current extraction methods are not sufficient to better extract AKO and its nutrients, and AKO is susceptible to lipid oxidation during processing and storage, leading to nutrient loss and the formation of off-flavors and toxic compounds. The development of various extraction methods and encapsulation systems for AKO to improve oil yield, nutritional value, antioxidant capacity, and bioavailability has become a research hotspot. This review summarizes the research progress of AKO from extraction to encapsulation system construction. The AKO extraction mechanism, technical parameters, oil yield and composition of solvent extraction, aqueous enzymatic extraction, supercritical/subcritical extraction, and three-liquid-phase salting-out extraction system are described in detail. The principles, choice of emulsifier/wall materials, preparation methods, advantages and disadvantages of four common encapsulation systems for AKO, namely micro/nanoemulsions, microcapsules, liposomes and nanostructured lipid carriers, are summarized. These four encapsulation systems are characterized by high encapsulation efficiency, low production cost, high bioavailability and high antioxidant capacity. Depending on the unique advantages and conditions of different encapsulation methods, as well as consumer demand for health and nutrition, different products can be developed. However, existing AKO encapsulation systems lack relevant studies on digestive absorption and targeted release, and the single product category of commercially available products limits consumer choice. In conjunction with clinical studies of AKO encapsulation systems, the development of encapsulation systems for special populations should be a future research direction.

Reformulation of Bologna Sausage by Total Pork Backfat Replacement with an Emulsion Gel Based on Olive, Walnut, and Chia Oils, and Stabilized with Chitosan

Bologna sausage, also called "la grassa", is a very popular meat product despite its high fat content and lipidic profile raising serious negative health concerns. An emulsion gel containing olive, walnut, and chia oils, stabilized with soy protein isolate, transglutaminase, and chitosan, was used as total pork backfat replacer in Bologna sausage. The nutritional, textural, and technological properties were assessed and sensory analyses were conducted. Color, pH, and lipid oxidation were monitored during 18 days of cold storage (4 °C). A normal fat Bologna sausage was used as a control reference. A decrease in the n-6/n-3 ratio from 16.85 to 1.86 (by 9 times) was achieved in the reformulated product as compared with the control, while the PUFA/SFA ratio increased from 0.57 to 1.61. Color measurements indicated that the lightness and yellowness increased while redness slightly decreased in the reformulated product. The total substitution of pork backfat in Bologna sausage by the emulsion gel developed in the present study was realized without significantly affecting the technological properties, the oxidative stability and the overall acceptance by the consumers.

Effects of Pork Backfat Replacement with Emulsion Gels Formulated with a Mixture of Olive, Chia and Algae Oils on the Quality Attributes of Pork Patties

This paper reports on the development of new emulsion gels containing a mixture of olive, chia and algae oil emulsified with soy protein isolate and stabilized by two different cold gelling agents, gelatin (EGEL) and chitosan (ECHIT), and to evaluate their potential use as pork backfat replacers in cooked pork patties. Reformulated patties were produced by half and full pork backfat replacement and compared to normal fat patties and reduced fat content patties made by replacing half of the added fat with water. Color parameters, pH and thermal stability of the emulsion gels were determined at processing and after 10 days of refrigerated storage. Proximate composition, fatty acid profile, technological properties and sensory attributes were evaluated after patty processing, while color parameters, pH and lipid oxidation were monitored in patties during 15 days of refrigerated storage (4 °C). Reformulated patties showed significant improvements of the lipid profile (lower saturated fatty acid content and n-6/n-3 ratio and higher long-chain polyunsaturated fatty acid content) as compared to the controls. In terms of technological properties, chitosan was more effective than gelatin as a stabilizer of the emulsion gel. All reformulated patties showed a good evolution of lipid oxidation during storage and acceptable sensory attributes.

Soy Protein Isolate as Emulsifier of Nanoemulsified Beverages: Rheological and Physical Evaluation

The production of biologically active molecules or the addition of new bioactive ingredients in foods, thereby producing functional foods, has been improved with nanoemulsion technology. In this sense, the aim of this work was to develop nanoemulsified beverages as potential candidates for the encapsulation of bioactive compounds, whose integrity and release across the intestinal tract are controlled by the structure and stability of the interfaces. To achieve this, firstly, a by-product rich-in protein has been evaluated as a potential candidate to act as an emulsifier (chemical content, amino acid composition, solubility, ζ-potential and surface tension were evaluated). Later, emulsions with different soy protein isolate concentrations (0.5, 1.0, 1.5 and 2.0 wt%), pH values (2, 4, 6 and 8) and homogenization pressures (100, 120 and 140 PSI) were prepared using a high-pressure homogenizer after a pre-emulsion formation. Physical (stability via Backscattering and drop size evolution) and rheological (including interfacial analysis) characterizations of emulsions were carried out to characterize their potential as delivery emulsion systems. According to the results obtained, the nanoemulsions showed the best stability when the protein concentration was 2.0 wt%, pH 2.0 and 120 PSI was applied as homogenization pressure.

Recent advances of octenyl succinic anhydride modified polysaccharides as wall materials for nano-encapsulation of hydrophobic bioactive compounds

Polysaccharides can be esterified with octenyl succinic anhydride (OSA) to form derivatives with amphiphilic properties. The general preparation methods of OSA-polysaccharides are described, especially the aqueous method. The new hydrophobic groups introduced result in OSA-polysaccharides showing higher interfacial properties, better emulsifying stability, higher viscosity, and lower digestibility. There have been advances in the development of OSA-polysaccharides-based nano-encapsulation systems for hydrophobic bioactive compounds in recent years. Nano-encapsulation systems are formed through nanoemulsions, nanocapsules, nanoparticles, micelles, vesicles, molecular inclusion complexes, and so on. This review aims to describe the preparation methods, the structure characterizations, and the physicochemical properties of OSA-polysaccharides as encapsulating agents. In addition, the focus is on the different nano-encapsulation systems based on OSA-polysaccharides as wall materials. Future perspectives will concern OSA-polysaccharides-based nano-encapsulation systems with optimized functional properties for providing higher bioavailability and targeted delivery of various hydrophobic bioactive compounds. © 2022 Society of Chemical Industry.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Effects of tocopherols on the stability of flaxseed oil-in-water emulsions stabilized by different emulsifiers: Interfacial partitioning and interaction

The potential effects of tocopherols (100 μM in emulsions) on the physicochemical stability of whey protein isolate (WPI), soy lecithin (SL), or Tween 20 (TW) stabilized flaxseed oil (FO)-in-water emulsions were investigated. During the storage (18 days at 55 ℃), the particle size, microstructure, and multiple light scattering results showed WPI-stabilized emulsions exhibited better physical stability when tocopherols were added hydroperoxides and TBARS concentration in TW-stabilized emulsions were higher than those of SL or WPI, which were suppressed differently by tocopherols. Among homologues, δ-tocopherol was more effective in inhibiting lipid oxidation than α-tocopherol, which was related to the higher interface partitioning. Moreover, the increased interfacial tension indicated tocopherols, especially δ-tocopherol, were adsorbed on the interface and interacted with WPI or SL via hydrophobic or electrostatic interactions determined by isothermal titration calorimetry. Our results suggest tocopherols are more applicable in WPI emulsion systems to achieve steady-state delivery of ALA.

Yogurt fortified with omega-3 using nanoemulsion containing flaxseed oil: Investigation of physicochemical properties

Flaxseed oil as a natural ingredient has many health benefits due to the rich contents of omega-3 fatty acids. However, its use in food formulations is limited because of low aqueous solubility, easy oxidation owing to the unsaturated nature of the fatty acids such as omega-3. The aim of this study was to prepare a stable nanoemulsion containing flaxseed oil and investigate the fortification of yogurt with this nanoemulsion compared with fortification with bulk flaxseed oil. The nanoemulsion of flaxseed oil-in-water was obtained by low-energy emulsification method. Optimized nanoemulsion contains 3% (w/w) flaxseed vegetable oil, 36% (w/w) surfactant, 10% (w/w) co-surfactant, and 51% (w/w) deionized water as a continuous phase. The result of transmission electron microscopy (TEM) showed that the optimal size was about 60 nm, which was stayed stable for 11 months. The results of gas chromatography (GC) indicated that the amount of omega-3 in nanoemulsion containing flaxseed oil was 27.3% and 19.8% after 7 days and 11 months, respectively. The turbidity results indicated the transparency of nanoemulsion after 11 months as well. The results of centrifuge experiments and thermal stress cycles exhibited that the optimized nanoemulsion was physically stable without any sign of creaming, phase separation, and cracking. In addition, pH and acidity of the yogurt fortified with nanoemulsion containing flaxseed oil were 4.22 and 1.41 wt%, respectively. In conclusion, fortifying yogurt with the nanoemulsion containing flaxseed oil can be considered as a solution to increase solubility, bioavailability, and protection of omega-3.

Active Casein Coatings and Films for Perishable Foods: Structural Properties and Shelf-Life Extension

There is an urgent need to increase the food supplies to fulfil the demands of future generations as the population of the world is expected to grow beyond 10 billion by 2050. An essential component for ensuring global food security is to reduce food losses during the post-harvest stage. Active edible coatings and films are a promising sustainable preservation technology for shelf-life extension of food products by hindering decay kinetics of minimally processed fruits and vegetables (F&V), by restricting the mass transfer of moisture, aroma, or gases and carrying an active compound, such as an antioxidant or antimicrobial. Active protein-based coatings and films have the potential to extend the shelf-life of food products by decreasing their respiration rates, as they exhibit an excellent gas barrier and good mechanical properties as compared to other biopolymeric packaging. Among protein-based biopolymers, casein and its derivatives as packaging films have been extensively studied due to their low cost, complete biodegradability, and availability. Currently, there is no review study focusing on caseinate-based active coating and film, thus, this review aims to give insights on the composition, rheology, structure, and properties of caseinate-based formulations by critically discussing the results presented in the literature. A methodological approach was followed to obtain relevant literature to discuss the influence of additives on the shelf-life of F&V. Furthermore, changes in secondary structure of casein were observed after incorporation of bioactive compounds (i.e., phenolic acids). Likewise, there is a need to explore chemical interactions among bioactive compounds and biopolymer material by using in silico and laboratory trials as food additives have shown to influence the physicochemical properties of film and shelf-life of food products.

The Effect of Microfluidization Pressure and Tocopherol Content on the Retention of Vitamin A in Oil-In-Water Emulsions

This work investigates the oxidative stability of vitamin A encapsulated in oil-in-water emulsions, which were prepared by using a microfluidizer. All emulsions were prepared with a fixed content of vitamin A (525 µM), corn oil (10%), water (90%), and whey protein (2%), but varying two main factors: the microfluidizer pressure (10, 50, 100, 200 MPa) and the amount of α-tocopherol (0, 0.25, 0.50, 1.00 mg/g). The content of vitamin A before and after the microfluidization process, and during the subsequent five weeks of storage at 40 °C were determined by HPLC-DAD. The results of the analysis of variance performed either on the data obtained before and after the microfluidization process or during the storage showed that the highest stability of vitamin A was obtained with the highest content of α-tocopherol and with an applied pressure between 100 and 200 MPa. The highest stability was explained by the smaller particle size of the resulting oil droplets. However, high pressures (200 MPa) showed a negative effect on vitamin A retention. These results could be useful for future formulations of retinoids.

Nanoencapsulation of unsaturated omega-3 fatty acids as protection against oxidation: A systematic review and data-mining

The chemical structure of unsaturated fatty acids makes them highly prone to oxidation, which decreases their nutritional properties. Nanocarriers have the ability to protect unstable nutraceuticals and take them to their specific targets. Thus, the aim is to determine the effectiveness of nanoencapsulation of omega-3 unsaturated fatty acids as protection against oxidation, as well as to apply data-mining approach to identify nanoencapsulation profiles. Three databases were used to search for studies focused on comparing omega-3 encapsulation to the active compound in its raw form. Studies without oxidation test or no use omega 3-rich oil as active ingredient in nanoformulations were excluded. Twenty-three studies were included in the systematic review. The qualitative analysis indicated that the main evaluated parameters were encapsulation efficiency (%), physical-chemical parameters and oxidation (analyzed at different storage temperatures), oil type, and whether the formulation was added to food. With regard to quantitative analysis, studies that did not perform oxidation tests focused on comparing free oil to the encapsulated one were excluded. Data-mining indicated that encapsulation efficiency and particle size were the main characteristic defining nanocarrier's effectiveness in protecting the oil against oxidation. Nevertheless, it is important to note the main characteristics associated with oil protection in nanocarriers.

Protective Effects of Anethum graveolens Seed's Oil Nanoemulsion Against Cadmium-Induced Oxidative Stress in Mice

The cadmium (Cd) is a toxic heavy metal that induces oxidative stress in both humans and animals. The plant phenolic compounds are capable of alleviating the toxicity of heavy metals. The encapsulation of plant bioactive compounds using nanoemulsion technology could enhance their bioefficacy. In this study, the protective effects of Anethum graveolens seed's oil nanoemulsion (AGN) against cadmium-induced oxidative stress in mice were studied. The results showed that the major bioactive compounds of essential oil were carvone and limonene. The result of particle size analysis revealed the pseudo-spherical droplets with nanometer size (148.8 ± 9.48 nm), homogenous dispersion, and physical colloidal stability. The Cd intoxication in mice (5 mg/kg BW for 30 days) reduced the body weight gain; however, treatment of the mice with different concentration of AGN (0.125, 0.25, and 0.5 mg/L, 30 days) through drinking water improved the body weight loss, liver Cd deposition, lipid peroxidation, cellular antioxidant redox potential, and inflammation in the liver, kidney, and brain of the mice challenged by cadmium-induced oxidative stress. The results of the present study revealed that drinking the essential oil of Anethum graveolens nanoemulsion containing carvone and limonene could be a promising strategy to protect the tissues against cadmium-induced oxidative damage.

Sargassum horneri as a Functional Food Ameliorated IgE/BSA-Induced Mast Cell Activation and Passive Cutaneous Anaphylaxis in Mice

Sargassum horneri (S. horneri), an edible brown alga, has been proposed as a functional food with an improvement effect on abnormal skin immune responses. The present study investigates the anti-allergic effect of an ethanol extract from S. horneri (SHE) on immunoglobulin E (IgE)/bovine serum albumin (BSA)-mediated activation in bone marrow-derived cultured-mast cells (BMCMCs) and passive cutaneous anaphylaxis (PCA) reaction in mice. SHE markedly and dose-dependently suppressed the degranulation of BMCMCs by reducing the β-hexosaminidase and histamine release without cytotoxicity. In addition, SHE significantly decreased the FcεRI expression on the surface of BMCMCs and its IgE binding. Moreover, SHE reduced the mRNA expression and the production of allergic cytokines; interleukin (IL)-1β, IL-4, IL-5, IL-6, IL-10, IL-13; interferon (IFN)-γ and/or tumor necrosis factor (TNF)-α; and a chemokine, thymus and activation-regulated chemokine (TARC), by suppressing the activation of Src-family kinases and nuclear factor (NF)-κB signaling. In further study, the application of SHE reduced the PCA reaction in an IgE/BSA-induced type I allergic mice model. Taken together, we suggest that SHE has an anti-allergic effect in type I allergic responses.

Encapsulation of Lipid-Soluble Bioactives by Nanoemulsions

Lipid-soluble bioactives are important nutrients in foods. However, their addition in food formulations, is often limited by limited solubility and high tendency for oxidation. Lipid-soluble bioactives, such as vitamins A, E, D and K, carotenoids, polyunsaturated fatty acids (PUFA) and essential oils are generally dispersed in water-based solutions by homogenization. Among the different homogenization technologies available, nanoemulsions are one of the most promising. Accordingly, this review aims to summarize the most recent advances in nanoemulsion technology for the encapsulation of lipid-soluble bioactives. Modern approaches for producing nanoemulsion systems will be discussed. In addition, the challenges on the encapsulation of common food ingredients, including the physical and chemical stability of the nanoemulsion systems, will be also critically examined.

In vitro fermentation and camellia oil emulsification characteristics of konjac glucomannan octenyl succinate

It is important to select an appropriate emulsifier to overcome the poor stability and dispersibility of the vegetable oils in food system. Previous studies suggest that OSA-modified konjac glucomannan (KGOS) has potential to be used as a food emulsifier. In this study, in vitro fermentation suggested that KGOS could promote the growth of the important intestinal probiotics Lactobacillus and Bifidobacterium and then promote intestinal fermentation to produce gas and short chain fatty acids. The emulsification experiments indicated that KGOS had good emulsification ability and stability for camellia oil. Under 40 MPa for 90 s homogenization, 0.2% (w/w) KGOS could encapsulate 20% (w/w) camellia oil. The nanoemulsion was stable at a low pH and high concentration of NaCl and ethanol. Konjac glucomannan octenyl succinate encapsulation could prevent the oxidation of camellia oil at 25°C and storage for 30 days.

Influence of Ternary Emulsifier Mixtures on Oxidative Stability of Nanoemulsions Based on Avocado Oil

The aim of this work was to study the effect of two emulsifiers (M1: SL-soy lecithin, Tw80-Tween 80 and CasCa-calcium caseinate and M2: SL-soy lecithin, Tw80-Tween 80 and SE-sucrose esters) on the oxidative stability of avocado oil-based nanoemulsions. Oil-in-water nanoemulsions were prepared using 3.6% w/w of two emulsifier mixtures, which were optimized by mixture experimental design in order to minimize particle size (PS) and polydispersity index (PdI). Then, the oxidative stability of nanoemulsions was evaluated through both an induction period and a quantification of hydroperoxides and thiobarbituric acid reactive species (TBARs) under accelerated storage conditions. The simplex-centroid mixture design showed that PS and PdI varied when proportions of different emulsifiers were modified, obtaining an optimized concentration for each mixture of: 85% SL, 10% Tw80 and 5%CasCa (M1) and 85% SL, 7.4% Tw80 and 7.6% SE (M2) that produced nanoemulsions with PS ~116 nm and PdI < 0.2. Nanoemulsions elaborated with M1 and M2 presented similar particle characteristics and physical stability to the control sample with Tw80. However, M1 nanoemulsions were more stable against lipid oxidation, since they showed the highest induction period and lower formation of hydroperoxides and TBARs during storage.

Cytotoxicity Evaluation of Turmeric Extract Incorporated Oil-in-Water Nanoemulsion

To overcome the drawbacks of conventional drug delivery system, nanoemulsion have been developed as an advanced form for improving the delivery of active ingredients. However, safety evaluation is crucial during the development stage before the commercialization. Therefore, the aim of this study was to evaluate the cytotoxicity of two types of newly developed nanoemulsions. Turmeric extract-loaded nanoemulsion powder-10.6 (TE-NEP-10.6, high content of artificial surfactant Tween 80), which forms the optimal nanoemulsion, and the TE-NEP-8.6 made by increasing the content of natural emulsifier (lecithin) to reduce the potential toxicity of nanoemulsion were cultured with various cells (NIH3T3, H9C2, HepG2, hCPC, and hEPC) and the changes of each cell were observed followed by nanoemulsion treatment. As a result, the two nanoemulsions (TE-NEP-10.6 and TE-NEP-8.6) did not show significant difference in cell viability. In the case of cell line (NIH3T3, H9C2, and HepG2), toxicity was not observed at an experimental concentration of less than 1 mg/mL, however, the cell survival rate decreased in a concentration dependent manner in the case of primary cultured cells. These results from our study can be used as a basic data to confirm the cell type dependent toxicity of nanoemulsion.