In Vitro Permeation Studies of Nanoemulsions Containing Ketoprofen as a Model Drug

Novel Therapeutic Hybrid Systems Using Hydrogels and Nanotechnology: A Focus on Nanoemulgels for the Treatment of Skin Diseases

Topical and transdermal drug delivery are advantageous administration routes, especially when treating diseases and conditions with a skin etiology. Nevertheless, conventional dosage forms often lead to low therapeutic efficacy, safety issues, and patient noncompliance. To tackle these issues, novel topical and transdermal platforms involving nanotechnology have been developed. This review focuses on the latest advances regarding the development of nanoemulgels for skin application, encapsulating a wide variety of molecules, including already marketed drugs (miconazole, ketoconazole, fusidic acid, imiquimod, meloxicam), repurposed marketed drugs (atorvastatin, omeprazole, leflunomide), natural-derived compounds (eucalyptol, naringenin, thymoquinone, curcumin, chrysin, brucine, capsaicin), and other synthetic molecules (ebselen, tocotrienols, retinyl palmitate), for wound healing, skin and skin appendage infections, skin inflammatory diseases, skin cancer, neuropathy, or anti-aging purposes. Developed formulations revealed adequate droplet size, PDI, viscosity, spreadability, pH, stability, drug release, and drug permeation and/or retention capacity, having more advantageous characteristics than current marketed formulations. In vitro and/or in vivo studies established the safety and efficacy of the developed formulations, confirming their therapeutic potential, and making them promising platforms for the replacement of current therapies, or as possible adjuvant treatments, which might someday effectively reach the market to help fight highly incident skin or systemic diseases and conditions.

Nanoemulgel: A Novel Nano Carrier as a Tool for Topical Drug Delivery

Nano-emulgel is an emerging drug delivery system intended to enhance the therapeutic profile of lipophilic drugs. Lipophilic formulations have a variety of limitations, which includes poor solubility, unpredictable absorption, and low oral bioavailability. Nano-emulgel, an amalgamated preparation of different systems aims to deal with these limitations. The novel system prepared by the incorporation of nano-emulsion into gel improves stability and enables drug delivery for both immediate and controlled release. The focus on nano-emulgel has also increased due to its ability to achieve targeted delivery, ease of application, absence of gastrointestinal degradation or the first pass metabolism, and safety profile. This review focuses on the formulation components of nano-emulgel for topical drug delivery, pharmacokinetics and safety profiles.

Thymoquinone-Loaded Essential Oil-Based Emulgel as an Armament for Anti-psoriatic Activity

Essential oils consist of oxygenated structures of secondary metabolites of aromatic plants with anti-psoriatic activities. Tea tree oil (TTO) is an essential oil with good anti-microbial and anti-inflammatory properties, exhibiting reduced levels of IL-1, IL-8, and PGE 2. Thymoquinone (TMQ) is popular herb in traditional medicine with known therapeutic benefits in several diseases and ailments. The ternary phase diagram was prepared with the weight ratio of S_mix (Tween® 80:Labrasol®): oil:water ratio for o/w emulsion preparation. The globule size was 16.54 ± 0.13 nm, and PDI around 0.22 ± 0.01 of the TTO-TMQ emulsion and found thermodynamically stable. The percentage drug content was found in the range of 98.97 ± 0.62 to 99.45 ± 0.17% with uniformity of the ThymoGel using Carbopol®. The extensive physicochemical properties were studied using different analytical techniques, and in vitro drug release was performed using Franz-diffusion apparatus. Anti-psoriatic activity of the formulations was studied using Imiquimod-induced psoriasis-like inflammation model in male Balb/c mice and parameters like PASI score, ear thickness, and spleen to body weight index were determined as well as histological staining, ELISA, skin compliance, and safety evaluation of TTO were performed. The combination of essential oils with TMQ shows synergistic activity and efficiently reduces the psoriasis disease condition.

Beneath the Skin: A Review of Current Trends and Future Prospects of Transdermal Drug Delivery Systems

The ideal drug delivery system has a bioavailability comparable to parenteral dosage forms but is as convenient and easy to use for the patient as oral solid dosage forms. In recent years, there has been increased interest in transdermal drug delivery (TDD) as a non-invasive delivery approach that is generally regarded as being easy to administer to more vulnerable age groups, such as paediatric and geriatric patients, while avoiding certain bioavailability concerns that arise from oral drug delivery due to poor absorbability and metabolism concerns. However, despite its many merits, TDD remains restricted to a select few drugs. The physiology of the skin poses a barrier against the feasible delivery of many drugs, limiting its applicability to only those drugs that possess physicochemical properties allowing them to be successfully delivered transdermally. Several techniques have been developed to enhance the transdermal permeability of drugs. Both chemical (e.g., thermal and mechanical) and passive (vesicle, nanoparticle, nanoemulsion, solid dispersion, and nanocrystal) techniques have been investigated to enhance the permeability of drug substances across the skin. Furthermore, hybrid approaches combining chemical penetration enhancement technologies with physical technologies are being intensively researched to improve the skin permeation of drug substances. This review aims to summarize recent trends in TDD approaches and discuss the merits and drawbacks of the various chemical, physical, and hybrid approaches currently being investigated for improving drug permeability across the skin.

Advances and challenges in nintedanib drug delivery

INTRODUCTION

Nintedanib (N.T.B) is an orally administered tyrosine kinase inhibitor that has been approved recently by U.S.F.D.A for idiopathic pulmonary fibrosis (I.P.F) and systemic sclerosis-associated interstitial lung disease (S.Sc-I.L.D). N.T.B is also prescribed in COVID-19 patients associated with I.P.F. However, it has an extremely low bioavailability of around 4.7%, and hence, researchers are attempting to address this drawback by different approaches.

AREAS COVERED

This review article focuses on enlisting all the formulation attempts explored by researchers to increase the bioavailability of N.T.B while also providing meaningful insight into the unexplored areas in formulation development, such as targeting of the lymphatic system and transdermal delivery. All the patents on the formulation development of N.T.B have also been summarized.

EXPERT OPINION

N.T.B has the potential to act on multiple diseases that are still being discovered, but its extremely low bioavailability is a challenge that is to be dealt with for obtaining the full benefit. Few studies have been performed aiming at improving the bioavailability, but there are unexplored areas that can be used, a few of which are explained in this article. However, the ability to reproduce laboratory results when scaling up to the industry level is the only factor to be taken into consideration.

A Rabbit Model for Prolonged Continuous Intravenous Infusion Via a Peripherally Inserted Central Catheter

Medical treatment may require the continuous intravenous (IV) infusion of drugs to sustain the therapeutic blood concentration and to minimize dosing errors. Animal disease models that ultimately mimic the intended use of new potential drugs via a continuous IV infusion in unrestrained, free roaming animals are required. While peripherally inserted central catheters (PICCs) and other central line techniques for prolonged IV infusion of drugs are prevalent in the clinic, continuous IV infusion methods in an animal model are challenging and limited. In most cases, continuous IV infusion methods require surgical knowledge as well as expensive and complicated equipment. In the current work, we established a novel rabbit model for prolonged continuous IV infusion by inserting a PICC line from the marginal ear vein to the superior vena cava and connecting it to an externally carried ambulatory infusion pump. Either saline or a clinically relevant formulation could be steadily and continuously infused at 3–6 ml/h for 11 consecutive days into freely moving rabbits while maintaining normal body temperature, weight, and respiration physiology, as determined by daily spirometry. This new model is simple to execute and can advance the ability to administer and test new drug candidates.

Development and characterisation of ibuprofen-loaded nanoemulsion with enhanced oral bioavailability

Lipophilic compounds constitute a majority of therapeutics in the pipeline of drug discovery. Despite possessing enhanced efficacy and permeability, some of these drugs suffer poor solubility necessitating the need of a suitable drug delivery system. Nanoemulsion is a drug delivery system that provides enhanced solubility for poorly soluble drugs in an attempt to improve the oral bioavailability. The purpose of this study is to develop a nanoemulsion system using ibuprofen as a model drug in order to investigate the potential of this colloidal system to enhance the absorption of poorly water-soluble drugs. Ibuprofen loaded-nanoemulsion with different drug concentrations (1.5, 3 and 6% w/w) were formulated from olive oil, sucrose ester L-1695 and glycerol using D-phase emulsification technique. A pseudoternary phase diagram was utilised to identify the optimal excipient composition to formulate the nanoemulsion system. In vitro diffusion chamber studies using rodent intestinal linings highlighted improved absorption profile when ibuprofen was delivered as nanoemulsion in comparison to microemulsions and drug-in-oil systems. This was further corroborated by in vivo studies using rat model that highlighted a two-fold increase in ibuprofen absorption when the drug was administered as a nanoemulsion relative to drug-in-oil system. On the other hand, when ibuprofen was administered as microemulsions, only a 1.5-fold increase in absorption was observed relative to drug-in-oil system. Thus, this study highlights the potential of using nanoemulsion as a drug delivery system to enhance the oral bioavailability of hydrophobic drugs.

Nanoemulsion as Oral Drug Delivery - A Review

BACKGROUND

Objective: The stability and delivery of drugs remain one of the key hurdles in the present situation. The present study depends on the design of a novel nanoemulsion drugdelivery system that would encapsulate a drug and to improve drug stability. The charisma of nanotechnology is majorly due to the smallest particle size at the nanoscale.

METHODS

Nanoemulsions attention is focused on emphasizing formulation aspect, method of preparation characterization techniques, evaluation parameters and various application of the nanoemulsions, several techniques to be used for the preparation of nanoemulsions like microfluidization, high-pressure homogenization, low energy emulsification and solvent evaporation method and their parameters to be characterized.

RESULTS

The design of effective formulations for drugs is being applied to enhance the solubility and bioavailability of water-insoluble drugs. The nanosized droplets have led to considerable attraction for this formulation, for the delivery of hydrophilic as well as hydrophobic drugs as drug carriers because of their improved drug solubilization capacity, long shelf life, ease of preparation and improvement of bioavailability of drugs.

CONCLUSION

The application of these nanoformulation preparations, limitations, their advantages and disadvantages as nanoemulsions will solve the various problems that current therapeutic agents face and has opened a new scenario to formulate nanoemulsions with various therapeutic agents with heightened competence along with oral drug delivery to treat diseases in the near future.

Nano-emulgel: Emerging as a Smarter Topical Lipidic Emulsion-based Nanocarrier for Skin Healthcare Applications

BACKGROUND

In recent decades, enormous efforts for different drug discovery processes have led to a number of drug molecules available today to overcome different challenges of the health care system. Unfortunately, more than half of these drugs are listed in either BCS (biopharmaceutical classification system) class II/ IV or both are eliminated from the development pipeline due to their limited clinical use. A nanotechnological approach bears much hope and lipoidal fabrication is found to be suitable for the delivery of such drugs. Nanoemulsion based gel i.e. nanoemulgel out of different nanolipoidal formulations has been found to be a suitable approach to successful drug delivery through topical routes. In past few years many herbal and synthetic active pharmaceutical ingredients (APIs) has been patented as nano sized emulsified gel for various therapeutic activities.

METHODS

Nanoemulgel is basically an emulsion-based topical gel formulation, where nanosized emulsion globules can be prepared with the help of high energy or low energy methods and further converted into nanoemulgel by adding a suitable gelling agent. Nanoemulgel fabrication enlists various kinds of polymeric materials, surfactants and fatty substances of natural, synthetic and semi-synthetic nature with a globule size range from 5 to 500 nm.

RESULTS

Nanoemulgel can be applicable to various acute and chronic diseases through topical routes.

CONCLUSION

Nanoemulgel preparations of many recently approved drugs are being used successfully in different areas of health care and have re-defined the significance of topical route of delivery as compared to other routes. However, along with various improvements in the current state of the delivery system, the safety factor needs to be taken into account by toxicological studies of the materials used in such formulations.

In Vitro Drug Dissolution/Permeation Testing of Nanocarriers for Skin Application: a Comprehensive Review

This review highlights in vitro drug dissolution/permeation methods available for topical and transdermal nanocarriers that have been designed to modulate the propensity of drug release, drug penetration into skin, and permeation into systemic circulation. Presently, a few of USFDA-approved in vitro dissolution/permeation methods are available for skin product testing with no specific application to nanocarriers. Researchers are largely utilizing the in-house dissolution/permeation testing methods of nanocarriers. These drug release and permeation methods are pending to be standardized. Their biorelevance with reference to in vivo plasma concentration-time profiles requires further exploration to enable translation of in vitro data for in vivo or clinical performance prediction.

Solid lipid nanoparticles for the controlled delivery of poorly water soluble non-steroidal anti-inflammatory drugs

Non-steroidal anti-inflammatory drugs (NSAIDs) such as ibuprofen (IBP) are among the most prescribed drugs across the globe. However, most NSAIDs are insoluble in water leading them to have poor bioavailability and erratic absorption. Moreover, NSAIDs such as IBP and ketoprofen (KP) have to be administered very frequently due to their short plasma half-life leading to side effects. Controlled release formulations of IBP, KP and nabumetone (NBT) based on solid lipid nanoparticles (SLNs) were successfully synthesised in the present study to solve the above-mentioned challenges that are associated with NSAIDs. SLNs were prepared in two steps; hot-melt homogenization followed by sonication to formulate SLNs with spherical morphology. While capmul® GMS-50K (capmul) was used as the lipid due to the high solubility of the studied drugs in it, gelucire® 50/13 (gelucire) was used as the surfactant. It was found that particle size was directly proportional to drug concentration and inversely proportional to surfactant concentration, volume of water added and temperature of water. Ultrasonication in a pulse mode with optimum duration of 15min was essential to obtain smaller nanoparticles through the formation of a nanoemulsion. Drug loaded SLNs with small particle size and narrow size distribution with good solid loading, encapsulation efficiency and drug loading percentage could be prepared using the optimised conditions. SLNs prepared at the optimised condition were characterized thoroughly by using different techniques such as dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The cytotoxicity results showed that the prepared SLNs are non-toxic to Raw cell line. The drugs IBP, KP and NBT showed 53, 74 and 69% of percentage entrapment efficiency with drug loading of 6, 2 and 7% respectively. Slow, steady and sustained drug release was observed from the SLNs for over 6days.

Nanomaterials for transdermal drug delivery: beyond the state of the art of liposomal structures

A wide range of biomedical materials have been proposed to meet the different needs for controlled oral or intravenous drug delivery. The advantages of oral delivery such as self-administration of a pre-determined drug dose at defined time intervals makes it the most convenient means for the delivery of small molecular drugs. It fails however to delivery therapeutic macromolecules due to rapid degradation in the stomach and size-limited transport across the epithelium. The primary mode of administration of macromolecules is presently via injection. This administration mode is not without limitations, as the invasive nature of injections elicits pain and decreases patients' compliance. Alternative routes for drug delivery have been looked for, one being the skin. Delivery of drugs via the skin is based on the therapeutics penetrating the stratum corneum (SC) with the advantage of overcoming first-pass metabolism of drugs, to deliver drugs with a short-half-life time more easily and to eliminate frequent administrations to maintain constant drug delivery. The transdermal market still remains limited to a narrow range of drugs. The low permeability of the SC to water-soluble and macromolecular drugs poses significant challenges to transdermal administration via passive diffusion through the skin, as is the case for all topically administered drug formulations intended to bring the therapeutic into the general circulation. To widen the scope of drugs for transdermal delivery, new procedures to enhance skin permeation to hydrophilic drugs and macromolecules are under development. Next to the integration of skin enhancers into pharmaceutical formulations, nanoparticles based on lipid carriers have been widely considered and reviewed. While being briefly reviewed here, the main focus of this article is on current advancements using polymeric and metallic nanoparticles. Next to these passive technologies, the handful of active technologies for local and systemic transdermal drug delivery will be discussed and put into perspective. While passive approaches dominate the literature and the transdermal market, active delivery based on microneedles or iontophoresis approaches have shown great promise for transdermal drug delivery and have entered the market, in the last decade. This review gives an overall idea of the current activities in this field.

Topical Nano and Microemulsions for Skin Delivery

Nanosystems such as microemulsions (ME) and nanoemulsions (NE) offer considerable opportunities for targeted drug delivery to and via the skin. ME and NE are stable colloidal systems composed of oil and water, stabilised by a mixture of surfactants and cosurfactants, that have received particular interest as topical skin delivery systems. There is considerable scope to manipulate the formulation components and characteristics to achieve optimal bioavailability and minimal skin irritancy. This includes the incorporation of established chemical penetration enhancers to fluidize the stratum corneum lipid bilayers, thus reducing the primary skin barrier and increasing permeation. This review discusses nanosystems with utility in skin delivery and focuses on the composition and characterization of ME and NE for topical and transdermal delivery. The mechanism of skin delivery across the stratum corneum and via hair follicles is reviewed with particular focus on the influence of formulation.

Size-dependent penetration of nanoemulsions into epidermis and hair follicles: implications for transdermal delivery and immunization

Nanoemulsions have been widely applied to dermal and transdermal drug delivery. However, whether and to what depth the integral nanoemulsions can permeate into the skin is not fully understood. In this study, an environment-responsive dye, P4, was loaded into nanoemulsions to track the transdermal translocation of the nanocarriers, while coumarin-6 was embedded to represent the cargoes. Particle size has great effects on the transdermal transportation of nanoemulsions. Integral nanoemulsions with particle size of 80 nm can diffuse into but not penetrate the viable epidermis. Instead, these nanoemulsions can efficiently fill the whole hair follicle canals and reach as deep as 588 μm underneath the dermal surfaces. The cargos are released from the nanoemulsions and diffuse into the surrounding dermal tissues. On the contrary, big nanoemulsions, with mean particle size of 500 nm, cannot penetrate the stratum corneum and can only migrate along the hair follicle canals. Nanoemulsions with median size, e.g. 200 nm, show moderate transdermal permeation effects among the three-size nanoemulsions. In addition, colocalization between nanoemulsions and immunofluorescence labeled antigen-presenting cells was observed in the epidermis and the hair follicles, implying possible capture of nanoemulsions by these cells. In conclusion, nanoemulsions are advantageous for transdermal delivery and potential in transcutaneous immunization.

Potential and future scope of nanoemulgel formulation for topical delivery of lipophilic drugs

The Nanoemulgel drug delivery system is a formulation related intervention to improve the systemic delivery and therapeutic profile of lipophilic drugs. Nanoemulgel is an amalgamated formulation of two different systems in which nanoemulsion containing drug is incorporated into a gel base. The fusion of the two systems makes this formulation advantageous in several ways. Lipophilic drugs can be easily incorporated and the skin permeability of the incorporated drugs can be enhanced in several folds due to the finely distributed droplets of nanoemulsion phase. As a result, the pharmacokinetic and pharmacodynamic profiles of the lipophilic drugs are improved significantly. An increasing trend in topical nanoemulgel use in recent years has been noticed because of the better acceptability of the preparation to the patients due to their noninvasive delivery, avoidance of gastrointestinal side effects, easier applicability and good therapeutic and safety profile. Despite of having few limitations, nanoemulgel formulation can be considered as a potential and promising candidates for topical delivery of lipophilic drugs in the future. The aim of this review is to evaluate and report the current potential and future scope of nanoemulgel formulation for becoming an effective delivery system for poorly water soluble drugs. In this review, we have summarized and discussed the outcome of different studies on permeability, pharmacokinetic, pharmacodynamic and safety profile of the drugs delivered topically through nanoemulgel. Rationality of use along with the major challenges to overcome for nanoemulgel formulation has been discussed.

Nanoemulsions: formation, properties and applications

Nanoemulsions are kinetically stable liquid-in-liquid dispersions with droplet sizes on the order of 100 nm. Their small size leads to useful properties such as high surface area per unit volume, robust stability, optically transparent appearance, and tunable rheology. Nanoemulsions are finding application in diverse areas such as drug delivery, food, cosmetics, pharmaceuticals, and material synthesis. Additionally, they serve as model systems to understand nanoscale colloidal dispersions. High and low energy methods are used to prepare nanoemulsions, including high pressure homogenization, ultrasonication, phase inversion temperature and emulsion inversion point, as well as recently developed approaches such as bubble bursting method. In this review article, we summarize the major methods to prepare nanoemulsions, theories to predict droplet size, physical conditions and chemical additives which affect droplet stability, and recent applications.

Nanoemulsion as a topical delivery system of antipsoriatic drugs

Nanoemulsion as a potential enhancer for the treatment of psoriasis.

Optimization and anticancer activity in vitro and in vivo of baohuoside I incorporated into mixed micelles based on lecithin and Solutol HS 15

Baohuoside I, extracted from the Herba epimedii, is an effective but a poorly soluble antitumor drug. To improve its solubility, formulation of baohuoside I-loaded mixed micelles with lecithin and Solutol HS 15 (BLSM) has been performed in this study. We performed a systematic comparative evaluation of the antiproliferative effect, cellular uptake, antitumor efficacy, and in vivo tumor targeting of these micelles using non-small cell lung cancer (NSCLC) A549 cells. Results showed that the obtained micelles have a mean particle size of around 62.54 nm, and the size of micelles was narrowly distributed. With the improved cellular uptake, BLSM displayed a more potent antiproliferative action on A549 cell lines than baohuoside I; half-maximal inhibitory concentration (IC₅₀) was 6.31 versus 18.28 µg/mL, respectively. The antitumor efficacy test in nude mice showed that BLSM exhibited significantly higher antitumor activity against NSCLC with lesser toxic effects on normal tissues. The imaging study for in vivo targeting demonstrated that the mixed micelles formulation achieved effective and targeted drug delivery. Therefore, BLSM might be a potential antitumor formulation.

Application of liposomes in treatment of rheumatoid arthritis: quo vadis

The most common treatments for rheumatoid arthritis include nonsteroidal anti-inflammatory drugs (NSAIDs), corticosteroids, disease modifying antirheumatic drugs (DMARDs), and some biological agents. However, none of the treatments available is able to achieve the ultimate goal of treatment, that is, drug-free remission. This limitation has shifted the focus of treatment to delivery strategies with an ability to deliver the drugs into the synovial cavity in the proper dosage while mitigating side effects to other tissues. A number of approaches like microemulsions, microspheres, liposomes, microballoons, cocrystals, nanoemulsions, dendrimers, microsponges, and so forth, have been used for intrasynovial delivery of these drugs. Amongst these, liposomes have proven to be very effective for retaining the drug in the synovial cavity by virtue of their size and chemical composition. The fast clearance of intra-synovially administered drugs can be overcome by use of liposomes leading to increased uptake of drugs by the target synovial cells, which in turn reduces the exposure of nontarget sites and eliminates most of the undesirable effects associated with therapy. This review focuses on the use of liposomes in treatment of rheumatoid arthritis and summarizes data relating to the liposome formulations of various drugs. It also discusses emerging trends of this promising technology.

Improved percutaneous delivery of ketoprofen using combined application of nanocarriers and silicon microneedles

Objectives

The aim of our study was to evaluate the effect of designing ketoprofen-loaded nanosized spheres and combining them with solid silicon microneedles for enhanced and sustained percutaneous drug delivery.

Methods

Ketoprofen-loaded nanoparticles (KET-NP) were designed by modified solvent displacement method, using poly (D, L-lactic acid) (PDLLA). All prepared nanoparticles were characterised with regard to their particle size distribution, morphology, surface properties, thermal behaviour, drug content, drug release and stability. In-vitro skin permeation studies were conducted on Franz-type diffusion cells using porcine skin treated with ImmuPatch silicon microneedles (Tyndall Nation Institute, Cork, Ireland).

Key findings

The study showed that uniform nanospheres were prepared with high encapsulation efficiency and retained stable for 2 months. After an initial burst release, the PDLLA nanoparticles were capable of sustaining and controlling ketoprofen release that followed Korsmeyer–Peppas kinetics. An enhanced flux of ketoprofen was observed in the skin treated with silicon microneedles over a prolonged period of time.

Conclusions

Following application of silicon microneedle arrays, KET-NP were able to enhance ketoprofen flux and supply the porcine skin with drug over a prolonged (24 h) period of time. Our findings indicate that the delivery strategy described here could be used for the further development of effective and painless administration systems for sustained percutaneous delivery of ketoprofen.

Effect of microemulsions on transdermal delivery of citalopram: optimization studies using mixture design and response surface methodology

The aim of this study was to evaluate the potential of microemulsions as a drug vehicle for transdermal delivery of citalopram. A computerized statistical technique of response surface methodology with mixture design was used to investigate and optimize the influence of the formulation compositions including a mixture of Brij 30/Brij 35 surfactants (at a ratio of 4:1, 20%-30%), isopropyl alcohol (20%-30%), and distilled water (40%-50%) on the properties of the drug-loaded microemulsions, including permeation rate (flux) and lag time. When microemulsions were used as a vehicle, the drug permeation rate increased significantly and the lag time shortened significantly when compared with the aqueous control of 40% isopropyl alcohol solution containing 3% citalopram, demonstrating that microemulsions are a promising vehicle for transdermal application. With regard to the pharmacokinetic parameters of citalopram, the flux required for the transdermal delivery system was about 1280 μg per hour. The microemulsions loaded with citalopram 3% and 10% showed respective flux rates of 179.6 μg/cm(2) and 513.8 μg/cm(2) per hour, indicating that the study formulation could provide effective therapeutic concentrations over a practical application area. The animal study showed that the optimized formulation (F15) containing 3% citalopram with an application area of 3.46 cm(2) is able to reach a minimum effective therapeutic concentration with no erythematous reaction.

Nanoparticles and microparticles for skin drug delivery

Skin is a widely used route of delivery for local and systemic drugs and is potentially a route for their delivery as nanoparticles. The skin provides a natural physical barrier against particle penetration, but there are opportunities to deliver therapeutic nanoparticles, especially in diseased skin and to the openings of hair follicles. Whilst nanoparticle drug delivery has been touted as an enabling technology, its potential in treating local skin and systemic diseases has yet to be realised. Most drug delivery particle technologies are based on lipid carriers, i.e. solid lipid nanoparticles and nanoemulsions of around 300 nm in diameter, which are now considered microparticles. Metal nanoparticles are now recognized for seemingly small drug-like characteristics, i.e. antimicrobial activity and skin cancer prevention. We present our unpublished clinical data on nanoparticle penetration and previously published reports that support the hypothesis that nanoparticles >10nm in diameter are unlikely to penetrate through the stratum corneum into viable human skin but will accumulate in the hair follicle openings, especially after massage. However, significant uptake does occur after damage and in certain diseased skin. Current chemistry limits both atom by atom construction of complex particulates and delineating their molecular interactions within biological systems. In this review we discuss the skin as a nanoparticle barrier, recent work in the field of nanoparticle drug delivery to the skin, and future directions currently being explored.

Nanocarrier for the transdermal delivery of an antiparkinsonian drug

The purpose of the present study was to investigate the potential of nanoemulsions as nanodrug carrier systems for the percutaneous delivery of ropinirole. Nanoemulsions comprised Capryol 90 as the oil phase, Tween 20 as the surfactant, Carbitol as the cosurfactant, and water as an external phase. The effects of composition of nanoemulsion, including the ratio of surfactant and cosurfactant (Smix) and their concentration on skin permeation, were evaluated. All the prepared nanoemulsions showed a significant increase in permeation parameters such as steady state flux (Jss) and permeability coefficient (Kp) when compared to the control (p<0.01). Nanoemulsion composition (NEL3) comprising ropinirole (0.5% w/w), Capryol 90 (5% w/w), Smix 2:1 (35% w/w), and water (59.5% w/w) showed the highest flux (51.81+/-5.03 microg/cm2/h) and was selected for formulation into nanoemulsion gel. The gel was further optimized with respect to oil concentration (Capryol 90), polymer concentration (Carbopol), and drug content by employing the Box-Behnken design, which statistically evaluated the effects of these components on ropinirole permeation. Oil and polymer concentrations were found to have a negative influence on permeation, while the drug content had a positive effect. Nanoemulsion gel showed a 7.5-fold increase in skin permeation rate when compared to the conventional hydrogel. In conclusion, the results of the present investigation suggested a promising role of nanoemulsions in enhancing the transdermal permeation of ropinirole.