Incorporation of rosuvastatin-loaded chitosan/chondroitin sulfate nanoparticles into a thermosensitive hydrogel for bone tissue engineering: preparation, characterization, and cellular behavior

Design, optimization and characterization of atorvastatin loaded chitosan-based polyelectrolyte complex nanoparticles based transdermal patch

AIM

Atorvastatin (ATO) loaded chitosan-based polyelectrolyte complex nanoparticles (PECN) incorporated transdermal patch was developed to enhance its skin permeability and bioavailability.

METHODOLOGY

The ATO loaded PECN were prepared by ionic gelation method and optimized by Box-Behnken design. The optimized batches were evaluated for physicochemical characteristics, in vitro, ex vivo, cell line and stability studies. The optimized ATO-PECN were incorporated into transdermal patches by solvent evaporation method and evaluated for their physicochemical properties, ex vivo skin permeation, in vivo pharmacokinetics and stability study.

RESULTS

The optimized batch of ATO-PECN had average size of 219.2 ± 5.98 nm with 82.68 ± 2.63 % entrapment and 25.41 ± 3.29 mV zeta potential. ATO-PECN showed sustained drug release and higher skin permeation. The cell line study showed that ATO-PECN increased the cell permeability of ATO as compared to ATO suspension. ATO-PECN loaded transdermal patch showed higher skin permeation. The in vivo pharmacokinetic study revealed that the ATO-PECN transdermal patch showed significant (p < 0.05) increase in pharmacokinetic parameters as compared to marketed oral tablet, confirming enhancement in bioavailability of ATO.

CONCLUSIONS

The results of the present work concluded that the ATO-PECN loaded transdermal patch is a promising novel drug delivery system for poorly bioavailable drugs.

Investigating layer-by-layer chitosan-dextran sulfate-coated mesoporous silica as a pH-sensitive drug delivery system

Mesoporous silica nanoparticles (MSNPs) coated by chitosan (CS) were shown to be a proper candidate as a carrier for drug delivery purposes. However, choosing the suitable drug-containing complexes to be applied on MSNPs-CS is of much greater importance to evaluate the possible candidate for an efficient combination of cell viability, drug release kinetics, and atherosclerosis prevention. In this regard, this study concentrates on the synthesis and assessment of coated MSNPs-CS designed for drug delivery purposes. The MSNPs are coated with polyelectrolyte complexes (PEC) composed of CS and dextran sulfate (MSNPs-CS-DX), serving as a versatile drug carrier with favorable biological characteristics. CS-DX is applied to MSNPs without requiring complex or multi-step synthesis procedures. Rosuvastatin, a cholesterol-lowering medication, is chosen for its therapeutic relevance. Additionally, CS-DX is found to relatively impede the uptake of low-density lipoproteins (LDLs) by macrophages, enhancing their potential therapeutic utility. FTIR pattern, FESEM, and TEM images prove MSNPs-CS-DX formation. DLS measurement demonstrates the average particle size of 110 nm for MSNPs, with the combined thickness of CS and DX layers ranging from 10 to 15 nm. BET test is carried out to evaluate the pore size and porosity of structure, showing outstanding results that cause an entrapment efficiency of 57% for MSNPs-CS-DX. Furthermore, the findings demonstrate the pH sensitivity of MSNPs-CS-DX on drug release kinetics. Notably, the CS-DX layer exhibits a significant enhancement in cell viability of human umbilical vein endothelial cells (HUVEC) by approximately 24% within a 24 h timeframe compared to MSNPs lacking CS-DX.

Magnesium-oxide-enhanced bone regeneration: 3D-printing of gelatin-coated composite scaffolds with sustained Rosuvastatin release

Critical-size bone defects are one of the main challenges in bone tissue regeneration that determines the need to use angiogenic and osteogenic agents. Rosuvastatin (RSV) is a class of cholesterol-lowering drugs with osteogenic potential. Magnesium oxide (MgO) is an angiogenesis component affecting apatite formation. This study aims to evaluate 3D-printed Polycaprolactone/β-tricalcium phosphate/nano-hydroxyapatite/ MgO (PCL/β-TCP/nHA/MgO) scaffolds as a carrier for MgO and RSV in bone regeneration. For this purpose, PCL/β-TCP/nHA/MgO scaffolds were fabricated with a 3D-printing method and coated with gelatin and RSV. The biocompatibility and osteogenicity of scaffolds were examined with MTT, ALP, and Alizarin red staining. Finally, the scaffolds were implanted in a bone defect of rat's calvaria, and tissue regeneration was investigated after 3 months. Our results showed that the simultaneous presence of RSV and MgO improved biocompatibility, wettability, degradation rate, and ALP activity but decreased mechanical strength. PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds produced sustained release of MgO and RSV within 30 days. CT images showed that PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds filled approximately 86.83 + 4.9 % of the defects within 3 months and improved angiogenesis, woven bone, and osteogenic genes expression. These results indicate the potential of PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds as a promising tool for bone regeneration and clinical trials.

Biomaterials combined with ADSCs for bone tissue engineering: current advances and applications

In recent decades, bone tissue engineering, which is supported by scaffold, seed cells and bioactive molecules (BMs), has provided new hope and direction for treating bone defects. In terms of seed cells, compared to bone marrow mesenchymal stem cells, which were widely utilized in previous years, adipose-derived stem cells (ADSCs) are becoming increasingly favored by researchers due to their abundant sources, easy availability and multi-differentiation potentials. However, there is no systematic theoretical basis for selecting appropriate biomaterials loaded with ADSCs. In this review, the regulatory effects of various biomaterials on the behavior of ADSCs are summarized from four perspectives, including biocompatibility, inflammation regulation, angiogenesis and osteogenesis, to illustrate the potential of combining various materials with ADSCs for the treatment of bone defects. In addition, we conclude the influence of additional application of various BMs on the bone repair effect of ADSCs, in order to provide more evidences and support for the selection or preparation of suitable biomaterials and BMs to work with ADSCs. More importantly, the associated clinical case reports and experiments are generalized to provide additional ideas for the clinical transformation and application of bone tissue engineering loaded with ADSCs.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Chitosan, polyethylene oxide/polycaprolactone electrospun core/shell nanofibrous mat containing rosuvastatin as a novel drug delivery system for enhancing human mesenchymal stem cell osteogenesis

Introduction: Due to the potential positive effects of rosuvastatin (RSV) on human mesenchymal stem cells (MSCs) osteogenesis and new bone regeneration, it is crucial to develop a suitable carrier that can effectively control the release profile of RSV. The primary objective of this study was to introduce a novel drug delivery system based on core/shell nanofibrous structures, enabling a sustained release of RSV. Methods: To achieve this, coaxial electrospinning was employed to fabricate chitosan (CS)+polyethylene oxide (PEO)/polycaprolactone (PCL) nanofibrous mats, wherein RSV was incorporated within the core of nanofibers. By optimizing the relevant parameters of the electrospinning process, the mats' surface was further modified using plasma treatment. The fibers' shape, structure, and thermal stability were characterized. The wettability, and degradation properties of the fabricated mats were also examined. In vitro studies were conducted to examine the release behavior of RSV. Additionally, the capability of MSCs to survive and differentiate into osteocytes when cultured on nanofibers containing RSV was evaluated. Results: Results demonstrated the successful fabrication of CS + PEO + RSV/PCL core/shell mats with a core diameter of approximately 370 nm and a shell thickness of around 70 nm under optimized conditions. Plasma treatment was found to enhance the wettability and drug-release behavior of the mats. The nanofibrous structure, serving as a carrier for RSV, exhibited increased proliferation of MSCs and enhanced osteogenic differentiation. Conclusion: Therefore, it can be concluded that CS + PEO + RSV/PCL core/shell nanofibrous structure can be utilized as a sustained-release platform for RSV over an extended period, making it a promising candidate for guided bone regeneration.

Chondroitin sulfate-based composites: a tour d'horizon of their biomedical applications

Chondroitin sulfate (CS), a natural anionic mucopolysaccharide, belonging to the glycosaminoglycan family, acts as the primary element of the extracellular matrix (ECM) of diverse organisms. It comprises repeating units of disaccharides possessing β-1,3-linked N-acetyl galactosamine (GalNAc), and β-1,4-linked D-glucuronic acid (GlcA), and exhibits antitumor, anti-inflammatory, anti-coagulant, anti-oxidant, and anti-thrombogenic activities. It is a naturally acquired bio-macromolecule with beneficial properties, such as biocompatibility, biodegradability, and immensely low toxicity, making it the center of attention in developing biomaterials for various biomedical applications. The authors have discussed the structure, unique properties, and extraction source of CS in the initial section of this review. Further, the current investigations on applications of CS-based composites in various biomedical fields, focusing on delivering active pharmaceutical compounds, tissue engineering, and wound healing, are discussed critically. In addition, the manuscript throws light on preclinical and clinical studies associated with CS composites. A short section on Chondroitinase ABC has also been canvassed. Finally, this review emphasizes the current challenges and prospects of CS in various biomedical fields.

Chondroitin sulfate modified chitosan nanoparticles as an efficient and targeted gene delivery vehicle to chondrocytes

Conventional treatments for osteoarthritis (OA), including drug delivery and tissue engineering approaches, could not offer a high yield of cartilage repair due to the compact and exclusive structure of cartilage. Targeted and high-efficiency delivery of gene sequences is necessary to rebalance the lost homeostatic properties of the cartilage in OA. Herein, we synthesized chitosan (CH)-chondroitin sulfate (CS) nanoparticles (NPs) as a platform for delivering gene sequences. These new nanoparticles benefit from two natural polymers that minimize the toxicity, and the presence of CS can be in favor of targeted delivery. The CAG-GFP plasmid was used as a gene sequence model, and the nanoparticles could successfully encapsulate approximately all of them in their structure. Loaded nanoparticles were characterized in terms of morphology, size, zeta potential, the efficiency of encapsulation and, DNA release pattern. Cell viability and uptake of new nanoparticles were compared to the chitosan nanoparticles and Lipofectamine. After substituting TPP with CS, NPs exhibited a significant decrease in size. In addition, there was little difference in zeta potential between nanoparticles. Furthermore, a tremendous increase in plasmid uptake and cell viability was observed by CH-CS NPs compared to CH-TPP NPs and Lipofectamine. In the final stage, the knockdown level of MMP13 was evaluated with real-time RT-PCR for confirming the potential uptake of CH-CS NPs. The results revealed cellular uptake of siRNA loaded NPs and effective knockdown of MMP13 in chondrocytes. In conclusion, CH-CS nanoparticles can be considered as a candidate for gene therapy purposes in cartilage diseases.

Insights into the pivotal role of statins and its nanoformulations in hyperlipidemia

Hyperlipidemia is the primary cause of heart disorders and has been manifested as the condition with remarkable higher levels of very-low-density lipoproteins, low-density lipoproteins, intermediate-density lipoprotein, triglycerides, and cholesterol in blood circulation. Genetic causes or systemic metabolic illnesses like diabetes mellitus, increased alcohol consumption, hypothyroidism, and primary biliary cirrhosis are several reasons behind development of hyperlipidemia. Higher levels of lipids and lipoproteins in plasma are responsible for various health disorders in human body like occlusion of blood vessels, acute pancreatitis, and reduced artery lumen elasticity. Both primary and secondary prophylaxis of heart disease can be achieved through combination of pharmacologic therapy with therapeutic lifestyle adjustments. Statins which belongs to HMG-CoA reductase inhibitors are preferred for primary prevention of hyperlipidemia particularly for individuals at higher risk of development of heart disease. This review discusses the recent advancements and outcomes of nanoparticle drug carriers for statins in the therapy of hyperlipidemia.

Fabrication and Characterization of Chicken- and Bovine-Derived Chondroitin Sulfate/Sodium Alginate Hybrid Hydrogels

The physicochemical properties and microstructure of hybrid hydrogels prepared using sodium alginate (SA) and chondroitin sulfate (CS) extracted from two animal sources were investigated. SA-based hybrid hydrogels were prepared by mixing chicken- and bovine-derived CS (CCS and BCS, respectively) with SA at 1/3 and 2/3 (w/w) ratios. The results indicated that the evaporation water loss rate of the hybrid hydrogels increased significantly upon the addition of CS, whereas CCS/SA (2/3) easily absorbed moisture from the environment. The thermal stability of the BCS/SA (1/3) hybrid hydrogel was higher than that of CCS/SA (1/3) hybrid hydrogel, whereas the hardness and adhesiveness of the CCS/SA (1/3) hybrid hydrogel were lower and higher, respectively, than those of the BCS/SA (1/3) hybrid hydrogel. Low-field nuclear magnetic resonance experiments demonstrated that the immobilized water content of the CCS/SA (1/3) hybrid hydrogel was higher than that of the BCS/SA (1/3) hybrid hydrogel. FTIR showed that S=O characteristic absorption peak intensity of BCS/SA (2/3) was obviously higher, suggesting that BCS possessed more sulfuric acid groups than CCS. SEM showed that the hybrid hydrogels containing CCS have more compact porous microstructure and better interfacial compatibility compared to BCS.

Chitosan-based scaffolds as drug delivery systems in bone tissue engineering

The bone tissue engineering approach for treating large bone defects becomes necessary when the tissue damage surpasses the threshold of the inherent regenerative ability of the human body. A myriad of natural biodegradable polymers and scaffold fabrication techniques have emerged in the last decade. Chitosan (CS) is especially attractive as a bone scaffold material to support cell attachment and proliferation and mineralization of the bone matrix. The primary amino groups in CS are responsible for properties such as controlled drug release, mucoadhesion, in situ gelation, and transfection. CS-based smart drug delivery scaffolds that respond to environmental stimuli have been reported to have a localized sustained delivery of drugs in the large bone defect area. This review outlines the recent advances in the fabrication of CS-based scaffolds as a pharmaceutical carrier to deliver drugs such as antibiotics, growth factors, nucleic acids, and phenolic compounds for bone tissue regeneration.

Poloxamer-Based Scaffolds for Tissue Engineering Applications: A Review

Poloxamer is a triblock copolymer with amphiphilicity and reversible thermal responsiveness and has wide application prospects in biomedical applications owing to its multifunctional properties. Poloxamer hydrogels play a crucial role in the field of tissue engineering and have been regarded as injectable scaffolds for loading cells or growth factors (GFs) in the last few years. Hydrogel micelles can maintain the integrity and stability of cells and GFs and form an appropriate vascular network at the application site, thus creating an appropriate microenvironment for cell growth, nerve growth, or bone integration. The injectability and low toxicity of poloxamer hydrogels make them a noninvasive method. In addition, they can also be good candidates for bio-inks, the raw material for three-dimensional (3D) printing. However, the potential of poloxamer hydrogels has not been fully explored owing to the complex biological challenges. In this review, the latest progress and cutting-edge research of poloxamer-based scaffolds in different fields of application such as the bone, vascular, cartilage, skin, nervous system, and organs in tissue engineering and 3D printing are reviewed, and the important roles of poloxamers in tissue engineering scaffolds are discussed in depth.

An injectable thermosensitive hydrogel/nanomicelles composite for local chemo-immunotherapy in mouse model of melanoma

Recently, cancer immunotherapy and its combination with chemotherapy has been considered to improve therapeutic efficacy with lower systemic toxicity. Here, we prepared a thermosensitive hydrogel based hyaluronic acid (HA) encapsulated with macrophage colony-stimulating factor (GM-CSF) and paclitaxel (PTX) for chemoimmunotherapy of cancer. For this purpose, the micelles were prepared with the mixture of pluronic F127 (PF127) and tocopheryl polyethylene glycol (TPGS) and loaded with PTX. In the following step, thermosensitive hydrogel using PF127 and HA was prepared and co-encapsulated with the micelles and GM-CSF. Rheological performance, friability, release patterns for PTX and GM-CSF, and stability of GM-CSF in the hydrogel were evaluated in details. In-vitro and in vivo immunologic activities of GM-CSF in the hydrogel were also evaluated via numbering macrophages and recruited DCs in transwells and after subcutaneous injection of the GM-CSF-loaded hydrogel. Finally, mouse model of subcutaneous melanoma was induced in female C57 mice using B16 F10 cell line and the effect of optimized formulation was evaluated based on tumor volume and histological analysis. The hydrogel could maintain the biological activity of the incorporated drugs and exhibited a more prolonged release for PTX compared to GM-CSF. GM-CSF-releasing HA/PF127 hydrogel successfully recruited macrophages in vitro. Moreover, the most potent anti-tumor effect was observed following the intra-tumoral injection of the optimized formulation in melanoma bearing mice, compared to immunization by the GM-CSF and PTX alone. The current formulation shows a great promise to conquer resistant malignancies and provides a new approach for co-encapsulating of hydrophobic anticancer drugs and growth factor.

Advances in the therapeutic delivery and applications of functionalized Pluronics: A critical review

Pluronic (PEO-PPO-PEO) block copolymers can form nano-sized micelles with a structure composed of a hydrophobic PPO core and hydrophilic PEO shell layer. Pluronics are U.S. Food and Drug Administration approved polymers, which are widely used for solubilization of drugs and their delivery, gene/therapeutic delivery, diagnostics, and tissue engineering applications due to their non-ionic properties, non-toxicity, micelle forming ability, excellent biocompatibility and biodegradability. Although Pluronics have been employed as drug carrier systems for several decades, numerous issues such as rapid dissolution, shorter residence time in biological media, fast clearance and weak mechanical strength have hindered their efficacy. Pluronics have been functionalized with pH-sensitive, biological-responsive moieties, antibodies, aptamers, folic acid, drugs, different nanoparticles, and photo/thermo-responsive hydrogels. These functionalization strategies enable Pluronics to act as stimuli responsive and targeted drug delivery vehicles. Moreover, Pluronics have emerged in nano-emulsion formulations and have been utilized to improve the properties of cubosomes, dendrimers and nano-sheets, including their biocompatibility and aqueous solubility. Functionalization of Pluronics results in the significant improvement of target specificity, loading capacity, biocompatibility of nanoparticles and stimuli responsive hydrogels for the promising delivery of a range of drugs. Therefore, this review presents an overview of all advancements (from the last 15 years) in functionalized Pluronics, providing a valuable tool for industry and academia in order to optimize their use in drug or therapeutic delivery, in addition to several other biomedical applications.

Sustained Delivery of Lactoferrin Using Poloxamer Gels for Local Bone Regeneration in a Rat Calvarial Defect Model

Lactoferrin (LF) is a multifunctional milk glycoprotein that promotes bone regeneration. Local delivery of LF at the bone defect site is a promising approach for enhancement of bone regeneration, but efficient systems for sustained local delivery are still largely missing. The aim of this study was to investigate the potential of the poloxamers for sustained delivery of LF to enhance local bone regeneration. The developed LF/poloxamer formulations were liquid at room temperature (20 °C) transforming to a sustained releasing gel depot at body temperature (37 °C). In vitro release studies demonstrated an initial burst release (~50%), followed by slower release of LF for up to 72 h. Poloxamer, with and without LF, increased osteoblast viability at 72 h (p < 0.05) compared to control, and the immune response from THP-1 cells was mild when compared to the suture material. In rat calvarial defects, the LF/poloxamer group had lower bone volume than the controls (p = 0.0435). No difference was observed in tissue mineral density and lower bone defect coverage scores (p = 0.0267) at 12 weeks after surgery. In conclusion, LF/poloxamer formulations support cell viability and do not induce an unfavourable immune response; however, LF delivery via the current formulation of LF200/poloxamer gel did not demonstrate enhanced bone regeneration and was not compatible with the rat calvarial defect model.

Preparation and characterization of Eudragit L 100-55/chitosan enteric nanoparticles containing omeprazole using general factorial design: in vitro/in vivo study

Background and purpose:

Omeprazole (OMP) is broadly used for the treatment of gastroesophageal reflux and other acid-related diseases. The current study aimed to prepare enteric-coated nanoparticles containing OMP to achieve a stable powder formulation easily prescribed in children.

Experimental approach:

The nanoparticles were formed by complex coacervation method using chitosan (CTS) and Eudragit L100/55 (EU) and the impact of various formulation variables (the concentrations of EU solution and its volume ratio to CTS solution) were assessed using 3² fractional design. The mean particle size (PS), zeta potential (ZP), encapsulation efficiency (EE), and drug loading (DL) were determined. Finally, the pharmacological effects of the optimized OMP enteric nanoparticles were evaluated by an in vivo antiulcer study using Sprague-Dawley rats.

Findings/Results:

The highest desirability value was for formulation F5 (containing EU concentration 4 mg/mL and EU/CTS volume ratio 2:1). PS, ZP, EE, and DL of the optimized OMP-loaded nanoparticles were confirmed 810 ± 14 nm, -38.2 ± 1.8 mV, 83.1± 4.2%, and 13.1± 1.5%, respectively. in vitro release studies showed the pH sensitivity of nanoparticles and OMP release was pH-dependent. in vivo pharmacological assessment revealed that the optimized formulation was able to protect rat stomach against ulcer formation induced by indomethacin compared to the group that received normal saline which demonstrated severe peptic ulcer and hemorrhagic spots.

Conclusion and implication:

Our results indicated that the enteric EU/CTS nanoparticles were successfully prepared via a complex coacervation method and their efficacy could be comparable with commercial OMP pellets.

Triblock Copolymer Bioinks in Hydrogel Three-Dimensional Printing for Regenerative Medicine: A Focus on Pluronic F127

Three-dimensional (3D) bioprinting is a novel technique applied to manufacture semisolid or solid objects via deposition of successive thin layers. The widespread implementation of the 3D bioprinting technology encouraged scientists to evaluate its feasibility for applications in human regenerative medicine. 3D bioprinting gained much interest as a new strategy to prepare implantable 3D tissues or organs, tissue and organ evaluation models to test drugs, and cell/material interaction systems. The present work summarizes recent and relevant progress based on the use of hydrogels for the technology of 3D bioprinting and their emerging biomedical applications. An overview of different 3D printing techniques in addition to the nature and properties of bioinks used will be described with a focus on hydrogels as suitable bioinks for 3D printing. A comprehensive overview of triblock copolymers with emphasis on Pluronic F127 (PF127) as a bioink in 3D printing for regenerative medicine will be provided. Several biomedical applications of PF127 in tissue engineering, particularly in bone and cartilage regeneration and in vascular reconstruction, will be also discussed.

Fabrication of Chitosan-coated Mesoporous Silica Nanoparticles Bearing Rosuvastatin as Drug Delivery System

AIM

In this work, to improve the solubility and bioavailability of the rosuvastatin (RSV) drug, chitosan-coated mesoporous silica nanoparticles (CS-MSNs) as drug delivery systems were fabricated.

METHODS

To do this, first MSNs with a maximum specific surface area were synthesized from sodium silicate as silica source and different molar ratios of cethyl trimethylammonium bromide (CTAB) and pluronics (P123, PEO20PPO17PEO20) as surfactants via the sol-gel process. Then, the synthesized MSNs were coated by CS polymer with the help of (3-glycidoxypropyl)methyldiethoxysilane (GPTMS) as a linker between MSNs and CS. Subsequently, the RSV drug was loaded into the synthesized CS-coated MSNs. The products were characterized by different techniques, including X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR). The in vitro drug release profile of the fabricated DDS was evaluated in a typical phosphate-buffered saline (PBS) solution at different pH values (i.e., 4, 6, and 7.4) for 48 h. To assess the cytotoxicity, the viability of the human fibroblast cells exposed to the fabricated DDS was also examined.

RESULTS

The results showed that at an optimal molar ratio of P123/CTAB, the amorphous MSNs with a specific surface area of about 1080 m2/g, a pore diameter of 4 nm, a pore volume of 1.1 cm3/g, and an average size of about 30 nm were synthesized. Also, the presence of all the components, including the CS coating and the RSV drug, was confirmed in the structure of the fabricated DDS by FTIR analysis. Due to the pH-responsive feature of the CS coating, the RSV drug release from the fabricated DDS showed a reasonable environmental response; as the pH value of the PBS solution decreased, the degree of drug release increased.

CONCLUSION

The CS coating enhanced the cytotoxicity of the fabricated DDS and led to sustainable drug release behavior, which would provide a beneficial approach for drug delivery technology.

Preparation and in vitro characterization of histidine trimethyl chitosan conjugated nanocomplex incorporated into injectable thermosensitive hydrogels for localized gene delivery

Localized and sustained delivery of DNA using biomaterial scaffolds would increase the applicability of gene therapy in cancer treatment and tissue engineering. The most promising approach is the application of hydrogel scaffolds to encapsulate and deliver DNA in the form of nanocomplex to the target sites. In the present work, histidine conjugated trimethylated chitosan (HTMC) was synthesized and nanocomplexes fabricated with pDNA at different N/P ratios. The zeta potential and size of the HTMC/pDNA nanoparticles were determined using dynamic light scattering technique and the results were confirmed by scanning electron microscopy (SEM). The morphology of the nanoparticles was found spherical in shape having core-shell nanostructure. Based on gel retardation assay, polyplex dissociation following incubation with heparin, protection against DNase Ι, cytotoxicity and transfection experiments, HTMC/pDNA at N/P 15 was selected as an optimized formulation and loaded into CTS/PF127 and HA/PF127 hydrogel. The optimized HTMC/pDNA nanocomplex was homogenously distributed in the CTS/PF127 hydrogel. Transfection experiments were carried out on HEK293T cell lines and the results revealed that HTMC/pDNA complexes are stable and active inside the hydrogel, however, the transfection efficacy was decreased after incorporation into the hydrogel.

Sustained-release of erythropoietin using a novel injectable thermosensitive hydrogel: in vitro studies, biological activity, and efficacy in rats

In the current study erythropoietin (EPO) loaded trimethyl chitosan/tripolyphosphate nanoparticles-embedded in a thermosensitive hydrogel was prepared. The influence of the main experimental factors on the properties of EPO-loaded nanoparticles were evaluated using a two-factors central composite design and the optimized formulation was then freeze dried. Sodium dodecyl sulfate-page and circular dichroismspectroscopy were used to confirm the structural stability of EPO following encapsulation and freeze drying. Rheological properties, and the release rate of EPO from the hydrogel were examined. Mean particle size, zeta potential, and entrapment efficiency of the optimized EPO-loaded nanoparticles were confirmed 151.5 ± 16 nm, 11.5 ± 1.8 mV, and 78.5 ± 5.9%, respectively. The hydrogel containing nanoparticles existed as a solution at room temperature converted to a semisolid upon increasing the temperature to 35 ± 1.2 °C and demonstrated controlled release of EPO for more than 10 days. The stability of EPO in the hydrogel system was further investigated using in vivo biological activity assay and the result revealed relative potency of 0.85 as calibrated with standard EPO. Finally, a single injection of the EPO-loaded nanoparticles-embedded in the hydrogel administered to Sprague-Dawley rats resulted in elevated reticulocytes for about 20 days compared to control group received blank hydrogel.

Developed simvastatin chitosan nanoparticles co-crosslinked with tripolyphosphate and chondroitin sulfate for ASGPR-mediated targeted HCC delivery with enhanced oral bioavailability

Simvastatin (SV) repurposing has emerged as an alternative approach for the treatment of cancer. In this study, SV chitosan nanoparticles co-crosslinked with tripolyphosphate and chondroitin sulfate (SVCSChSNPs) were developed in order to maximize SV therapeutic efficiency. The hepatic targeting was realized using N-acetylgalactosamine (GalNAc) residues of ChS, which can be identified by the ASGPR receptors specifically expressed in hepatocytes. SV was repurposed as an anticancer agent against hepatocellular carcinoma (HCC). NPs were fabricated by the ionic gelation method, and the formulation variables (CS concentration, CS:ChS ratio, and CS solution pH) were optimized using a three-factor, three-level Box-Behnken design. The optimized NPs were investigated for particle size, size distribution, zeta potential, morphology, in vitro cytotoxicity, apoptotic effects against human hepatocellular carcinoma HepG2 cells, and detection of intracellular localization. The NPs were further evaluated for in vitro release behavior of SV and pharmacokinetics using Wister albino rats. Transmission electron microscopy (TEM) imaging showed a spherical shape with regular surface NPs of < 100 nm diameter. In vitro cytotoxicity testing showed that the SVCSChSNPs exhibited greater inhibition of proliferation in HepG2 cells and high cellular uptake through ASGPR-mediated endocytosis. The in vitro dissolution profile was 2.1-fold greater than that of pure SV suspension. Furthermore, in vivo oral pharmacokinetics revealed that the obtained NPs enhanced the bioavailability of SV by up to 2- and 1.6-fold for SV and SVA, respectively, compared to the pure SV suspension. These findings demonstrated that hepatic-targeted CSChSNPs delivering SV could potentially serve as a promising platform for HCC and other liver-related diseases.

Facile functionalization of Teriflunomide-loaded nanoliposomes with Chondroitin sulphate for the treatment of Rheumatoid arthritis

This research aims to coat Teriflunomide (TEF) loaded conventional nanoliposomes (CON-TEF-LIPO) with Chondroitin sulphate (CS) to produce CS-TEF-LIPO for the effective treatment of Rheumatoid arthritis (RA). Both CON-TEF-LIPO and CS-TEF-LIPO were produced, characterized and evaluated for their active targeting potential towards CD44 receptors. Cell cytotoxicity, cell viability and intracellular uptake study on differentiated U937 and MG-63 cells demonstrated the active targeting of CS-TEF-LIPO towards CD44 receptors. Furthermore, in vivo pharmacodynamic, biochemical, radiological and histopathological studies performed in adjuvant induced arthritic (AIA) rat model showed a significant (P < 0.05) reduction in inflammation in arthritic rat paw in CS-TEF-LIPO group compared to TEF and CON-TEF-LIPO groups. Moreover, liver toxicity study revealed that CS-TEF-LIPO showed no signs of toxicity and biodistribution study revealed the accumulation of CS-TEF-LIPO in synovial region of arthritic rat. Taken together, results suggest that CS-TEF-LIPO could provide a new insight for an effective treatment of RA.

Advancements in Hydrogel-Based Drug Sustained Release Systems for Bone Tissue Engineering

Bone defects caused by injury, disease, or congenital deformity remain a major health concern, and efficiently regenerating bone is a prominent clinical demand worldwide. However, bone regeneration is an intricate process that requires concerted participation of both cells and bioactive factors. Mimicking physiological bone healing procedures, the sustained release of bioactive molecules plays a vital role in creating an optimal osteogenic microenvironment and achieving promising bone repair outcomes. The utilization of biomaterial scaffolds can positively affect the osteogenesis process by integrating cells with bioactive factors in a proper way. A high water content, tunable physio-mechanical properties, and diverse synthetic strategies make hydrogels ideal cell carriers and controlled drug release reservoirs. Herein, we reviewed the current advancements in hydrogel-based drug sustained release systems that have delivered osteogenesis-inducing peptides, nucleic acids, and other bioactive molecules in bone tissue engineering (BTE).

Comparison the effects of chitosan and hyaluronic acid-based thermally sensitive hydrogels containing rosuvastatin on human osteoblast-like MG-63 cells

Background and purpose:

Bone regeneration can be accelerated by localized delivery of statins. Here, we aimed to evaluate the effect of two thermosensitive hydrogels containing rosuvastatin (RSV) on proliferation and differentiation of human osteoblast-like MG-63 cells.

Experimental approach:

Firstly, chitosan (CTS)/glycerophosphate (GP)/gelatin (G) thermosensitive hydrogel was prepared and characterized based on rheological properties, in vitro erosion, and release pattern of RSV and then the optimized mixture was loaded with nanoparticles containing RSV(NRSV). Secondly, the effect of NRSV-embedded in CTS/GP/G on cell viability, alkaline phosphate activity, and cell calcification was evaluated using MG-63 cells and compared with RSV-embedded into hyaluronic acid (HA)/Pluronic^® F127 (PF127) hydrogel.

Findings / Results:

CTS/GP mixtures with 1 and 1.5 % gelatin existing in solution with low viscosity at 4 °C were solidified at 32-34 °C while the mixture containing 2% gelatin was jellified at room temperature. The gelation times of CTS/GP/G with 1 and 1.5% gelatin were 72 and 44 s, respectively. The hydrogel containing 3% w/v NRSV was also converted to a semisolid upon increasing the temperature to 33-36 °C. Due to the higher gel strength of CTS/GP/G compared to HA/PF127 hydrogel, the release rate of RSV from the NRSV-embedded CTS/GP/G hydrogel was significantly slower than that of HA/PF127 system. As revealed by alkaline phosphatase and mineralization assays, NRSV-embedded in CTS/GP/G hydrogel had the most promotive effect on differentiation of osteoblasts among other mixtures.

Conclusion and implication:

NRSV-embedded in CTS/GP/G hydrogel could be efficiently used in the future for bone defects such as osteoporosis and bone fractures.

Poloxamer Hydrogels for Biomedical Applications

This review article focuses on thermoresponsive hydrogels consisting of poloxamers which are of high interest for biomedical application especially in drug delivery for ophthalmic, injectable, transdermal, and vaginal administration. These hydrogels remain fluid at room temperature but become more viscous gel once they are exposed to body temperature. In this way, the gelling system remains at the topical level for a long time and the drug release is controlled and prolonged. Poloxamers are synthetic triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO), also commercially known as Pluronics®, Synperonics® or Lutrol®. The different poloxamers cover a range of liquids, pastes, and solids, with molecular weights and ethylene oxide-propylene oxide weight ratios varying from 1100 to 14,000 and 1:9 to 8:2, respectively. Concentrated aqueous solutions of poloxamers form thermoreversible gels. In recent years this type of gel has arouse interest for tissue engineering. Finally, the use of poloxamers as biosurfactants is evaluated since they are able to form micelles in an aqueous environment above a concentration threshold known as critical micelle concentration (CMC). This property is exploited for drug delivery and different therapeutic applications.

Thermo-Sensitive Nanomaterials: Recent Advance in Synthesis and Biomedical Applications

Progress in nanotechnology has enabled us to open many new fronts in biomedical research by exploiting the peculiar properties of materials at the nanoscale. The thermal sensitivity of certain materials is a highly valuable property because it can be exploited in many promising applications, such as thermo-sensitive drug or gene delivery systems, thermotherapy, thermal biosensors, imaging, and diagnosis. This review focuses on recent advances in thermo-sensitive nanomaterials of interest in biomedical applications. We provide an overview of the different kinds of thermoresponsive nanomaterials, discussing their potential and the physical mechanisms behind their thermal response. We thoroughly review their applications in biomedicine and finally discuss the current challenges and future perspectives of thermal therapies.