Removal of polycyclic aromatic hydrocarbons from sediments using sodium persulfate activated by temperature and nanoscale zero-valent iron

Environmental applications and risks of engineered nanomaterials in removing petroleum oil in soil

Oil-contaminated soil posed serious threats to the ecosystems and human health. The unique and tunable properties of engineered nanomaterials (ENMs) enable new technologies for removing and repairing oil-contaminated soil. However, few studies systematically examined the linkage between the change of physicochemical properties and the removal efficiency and environmental functions (e.g., potential risk) of ENMs, which is vital for understanding the ENMs environmental sustainability and utilization as a safety product. Thus, this review briefly summarized the environmental applications of ENMs to removing petroleum oil from complex soil systems: Theoretical and practical fundamentals (e.g., excellent physicochemical properties, environmental stability, controlled release, and recycling technologies), and various ENMs (e.g., iron-based, carbon-based, and metal oxides nanomaterials) remediation case studies. Afterward, this review highlights the removing mechanism (e.g., adsorption, photocatalysis, oxidation/reduction, biodegradation) and the impact factor (e.g., nanomaterials species, natural organic matter, and soil matrix) of ENMs during the remediation process in soil ecosystems. Both positive and negative effects of ENMs on terrestrial organisms have been identified, which are mainly derived from their diverse physicochemical properties. In linking nanotechnology applications for repairing oil-contaminated soil back to the physical and chemical properties of ENMs, this critical review aims to raise the research attention on using ENMs as a fundamental guide or even tool to advance soil treatment technologies.

A review on recent advancements in the treatment of polyaromatic hydrocarbons (PAHs) using sulfate radicals based advanced oxidation process

Polyaromatic hydrocarbons (PAHs) are the most persistent compounds that get contaminated in the soil and water. Nearly 16 PAHs was considered to be a very toxic according US protection Agency. Though its concentration level is low in the environments but the effects due to it, is enormous. Advanced Oxidation Process (AOP) is an emergent methodology towards treating such pollutants with low and high molecular weight of complex substances. In this study, sulfate radical (SO4‾•) based AOP is emphasized for purging PAH from different sources. This review essentially concentrated on the mechanism of SO4‾• for the remediation of pollutants from different sources and the effects caused due to these pollutants in the environment was reduced by this mechanism is revealed in this review. It also talks about the SO4‾• precursors like Peroxymonosulfate (PMS) and Persulfate (PS) and their active participation in treating the different sources of toxic pollutants. Though PS and PMS is used for removing different contaminants, the degradation of PAH due to SO4‾• was presented particularly. The hydroxyl radical (•OH) mechanism-based methods are also emphasized in this review along with their limitations. In addition to that, different activation methods of PS and PMS were discussed which highlighted the performance of transition metals in activation. Also this review opened up about the degradation efficiency of contaminants, which was mostly higher than 90% where transition metals were used for activation. Especially, on usage of nanoparticles even 100% of degradation could be able to achieve was clearly showed in this literature study. This study mainly proposed the treatment of PAH present in the soil and water using SO4‾• with different activation methodologies. Particularly, it emphasized about the importance of treating the PAH to overcome the risk associated with the environment and humans due to its contamination.

Enhanced mitigation of inhalable particles and fine particle-bound PAHs from a novel hazardous waste-power plant candidate

Emissions of the inhalable particle (dp < 10 μm, PM10) and their harmful compositions from combustion sources have high potential on health risk with nearly no regulation. This study investigates the particle size distribution (PSD), as well as the removal mechanism of PM10 and fine particle (FP)-bound polycyclic aromatic hydrocarbons (PAHs) from the flue gas of a hazardous waste thermal treatment system. It has ultralow regulated emission and becomes a candidate of power generation module. A series of the advanced scrubbers, cyclonic demister, and baghouse was equipped for multi-pollutant control. The moderate or intense low oxygen dilution (MILD) combustion effectively inhibited the PM2.5 generation by volumetric oxidation. Advanced scrubbers removed PM1, PM2.5, and PM10 by 85.24, 68.68, and 97.60%, respectively, which achieved by local supersaturation, heterogeneous condensation of water vapor, and the growth of fine PM. Moreover, the scrubbers effectively scavenged the course PM10 containing the high-molecular-weight PAH homologs onto the water phase but promoted the condensation and absorption of the lighter homologs onto the fine particle surface (dp ∼5.3 μm). The size window (dp = 0.3-1.0 μm) of the minimum efficiency reporting value of a BH filtration led to the peak of FP-PAH mass and BaP equivalent (BaPeq) toxicity at dp = 0.1-0.4 and 0.1-0.8 μm, respectively. Consequently, the synergy of MILD combustion and the SCB-CYC-BH system effectively inhibited the PM2.5, PM10, PM2.5-PAHs, and FP-PAH levels from a waste thermal treatment process and further mitigated the potential health risk.

Effects of sedimentary organic matter degradation and structure on nonylphenol degradation by sodium persulfate

The structure and constituents of sedimentary organic matter (SOM) in the degradation of benzene ring-14C labeled 4-nonylphenol (14C-NP) by sodium persulfate (Na2S2O8) were investigated. Na2S2O8 mineralized over 84 % of 14C-NP to 14CO2, and no parent unlabeled 4-nonylphenol (NP) compounds were detected in the water-soluble/supernatant phase or extractable residues. Organic carbon (OC) was sequentially separated from six sediment samples collected from the Pearl River (BET), estuary (GSD), continental shelf (S11 and S21), and deep sea (M9 and M10). Demineralized OC (DM), unstable OC (USOC), nonhydrolyzable OC (NHC), and resistant OC (ROC) were obtained and characterized using solid-state 13C nuclear magnetic resonance (SS-NMR). The correlations among USOC, NHC, and the degradation kinetic constant of 14C-NP (kNP) were significant (R2 > 0.86, p < 0.01), indicating that USOC and NHC were the main factors controlling 14C-NP degradation. SOM structure and constituent analyses indicated that O-alkyl C + OCH3/NCH C + COO/NC=O C and carbohydrate + protein were positively related to Ln(kNP) (R2 > 0.72, p < 0.05) because these structures were unstable. However, the stable structures (Alkyl C and Arom CC) and constituents (sporopollenin, algaenan, and char) hindered 14C-NP degradation because they were negatively related to Ln(kNP) (R2 > 0.81, p < 0.05). The OC removal rate was positively correlated with 14C-NP degradation (R2 > 0.86, p < 0.01), indicating that the NP was primarily degraded in parallel with the breakdown of SOM. Stoichiometric analysis showed that Na2S2O8 effectively oxidized over 58 % of the OC to CO2, and the electron transfer efficiency was 17.2-69.5 %. This study is the first to emphasize the importance of SOM degradation, structure, and constituents in the degradation of NP by persulfate.

Efficient degradation of phenanthrene by biochar-supported nano zero-valent iron activated persulfate: performance evaluation and mechanism insights

Biochar-supported nano zero-valent iron (BC@nZVI) is a novel and efficient non-homogeneous activator for persulfate (PS). This study aimed to identify the primary pathways, the degradation mechanism and the performance of phenanthrene (PHE) with PS activated by BC@nZVI (BC@nZVI/PS). BC@nZVI as an activator for PS was prepared by liquid phase reduction method. BC@nZVI was characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffractometer and Fourier transform infrared spectroscopy. The effects of the iron-carbon mass ratio and BC@nZVI dosage were investigated, and a pseudo-first-order kinetic model was used to evaluate the PHE degradation. The results showed that BC supported nZVI and inhibited the agglomeration of nZVI, improving PS's activation efficiency. The optimal iron-carbon mass ratio was determined to be 1:4, accompanied by a dosage of 0.6 g/L of BC@nZVI. During PS activation, nZVI was transformed to Fe2+ and Fe3+, with the majority being Fe3+. The reducibility of nZVI in BC@nZVI enabled the reduction of Fe3+ to Fe2+ to activate PS. Radical quenching and electron paramagnetic resonance (EPR) revealed that the oxidative radicals in the BC@nZVI/PS system were mainly SO4-· and ·OH, where SO4-· was the primary free radical under acidic and neutral conditions and ·OH in alkaline conditions. Additionally, BC@nZVI adsorption had a limited role in PHE removal. This study can provide mechanism insights of PHE degradation in water with BC@nZVI activation of the Na2S2O8 system.

Typical groundwater contamination in the vicinity of industrial brownfields and basic methods of their treatment

The article deals with simple methods of decontamination of groundwater from the vicinity of brownfields contaminated with organic and inorganic substances. In the literature, thousands of articles on this issue at various sophisticated levels of knowledge can be found. The articles are mostly suitable as an extension of scientific knowledge; however, regarding potential costs and respectively scale-up problems, the applications are limited. It turns out that the vast majority of contaminated water can be effectively decontaminated by simple methods, in a coagulation-sedimentation sequence → simple oxidation and reduction methods for separated water (Fenton reaction, photocatalysis, ozonation, reductive dehalogenation with zero metals) → adsorption of remaining pollutants on simple sorbents, eg on biochar → (possibly bioremediation or advanced physical methods such as membrane filtration) → final purification on activated carbon. Due to the usually limited volume loads of soils with pollutants in the vicinity of brownfields, it is not economically advantageous to build demanding decontamination units for water purification. Usually, the simplest solution is the system to pump-and-treat around the source of contamination, with the main emphasis on highly effective removal of pollutants from water that returns underground. Groundwater was taken from boreholes leading to the saturated zone in the vicinity of several selected industrial brownfields. The solutions are shown on individual typical cases.

Facile synthesis of core\shell Fe3O4@mSiO2(Hb) and its application for organic wastewater treatment

Treatment of organic wastewater is a challenging task. Biological techniques using biocatalysts have shown their benefits in organic wastewater treatment. In this research, a novel biocatalyst was developed by encapsulation of Fe3O4 microspheres and haemoglobin (Hb) with mesoporous silica, named Fe3O4@mSiO2(Hb). Fe3O4@mSiO2(Hb) exhibited typical mesoporous characteristics (mesoporous silica), magnetic feature (Fe3O4) and peroxidase activity (Hb). The results showed that the immobilization of Hb into Fe3O4@mSiO2 did not affect its activity. In addition, Fe3O4@mSiO2(Hb) exhibited a higher efficiency in the peroxidation of aromatic compounds than free Hb. The peroxidase activity of the synthesized biocatalyst was estimated to be 120 Ug^-1, which was almost four times greater than that of previously reported immobilized Hb. Also, the Km of Fe₃O₄@mSiO₂(Hb) was similar to that of the free Hb and it was estimated to be 4.3 × 10^-4 μM, indicating that the activity of the Hb in the immobilized enzyme was not affected after immobilization. The immobilized enzyme was also found to be stable, recyclable and reusable. Taken together, these results indicate that the Fe₃O₄@mSiO₂(Hb) has good potential to be used for treating organic wastewater containing aromatic compounds. The magnetically separable novel biocatalyst developed in this study provided not only a more suitable microenvironment for retaining the activity of Hb, but also demonstrated enhanced stability and activity under unfavorable conditions.

Phenanthrene removal from the contaminated soil using the electrokinetic-Fenton method and persulfate as an oxidizing agent

Remediation of soils contaminated with hydrocarbon materials is of particular importance due to their association with food chain. One of the remediation methods, which has been taken into account in recent years by researchers, is the electrokinetic technique. In this study, the electrokinetic method was used in combination with the Fenton technique to remove phenanthrene from clay soil. Oxidizing agent and catalyst used in the Fenton technique greatly influenced the efficiency of the remediation process. To investigate the effect of these two factors on the remediation process, it was made use of three different types of electrodes as catalyst, including graphite, iron, and copper, as well as hydrogen peroxide and sodium persulfate with different concentrations as oxidizing agent. During the 9 experiments designed, factors affecting removal efficiency, such as remediation time, electric current intensity, electroosmotic flow rate, and pH of the cathode and anode reservoirs were also investigated. Overall, the use of the electrokinetic-Fenton method with 15% hydrogen peroxide and copper electrode exhibited a 100% increase in the process efficiency over the same time period required to perform the conventional electrokinetic method and removed 93% of the soil phenanthrene, these findings indicated that combining the Fenton technique with the electrokinetic method enhanced the efficiency of this method in removing organic pollutants from the soil. Also, the use of sodium persulfate as an oxidizing agent in the electrokinetic method increased the removal efficiency by more than 95% over the half time period required to perform the conventional electrokinetic method.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

In present research, the activated carbon was prepared by a green approach from pomegranate peel coated with zero-valent iron nanoparticles (AC-nZVI) and developed as adsorbent for the removal of amoxicillin from aqueous solution. The physicochemical properties of the AC-nZVI were investigated using XRD, FTIR, and FESEM techniques. The optimal values of the parameters for the best efficiency (97.9%) were amoxicillin concentration of 10 mg/L, adsorbent dose of 1.5 g/L, time of 30 min, and pH of 5, respectively. The adsorption equilibrium and kinetic data were fitted with the Langmuir monolayer isotherm model (qmax 40.282 mg/g, R² 0. 0.999) and pseudo-first order kinetics (R² 0.961). The reusability of the adsorbent also revealed that the adsorption efficiency decreased from 83.54 to 50.79% after five consecutive repetitions. Overall, taking into account the excellent efficiency, availability, environmental friendliness, and good regeneration, AC-nZVI can be introduced as a promising absorbent for amoxicillin from aquatic environments.

Zero-Valent Iron Nanoparticles for Soil and Groundwater Remediation

Zero-valent iron has been reported as a successful remediation agent for environmental issues, being extensively used in soil and groundwater remediation. The use of zero-valent nanoparticles have been arisen as a highly effective method due to the high specific surface area of zero-valent nanoparticles. Then, the development of nanosized materials in general, and the improvement of the properties of the nano-iron in particular, has facilitated their application in remediation technologies. As the result, highly efficient and versatile nanomaterials have been obtained. Among the possible nanoparticle systems, the reactivity and availability of zero-valent iron nanoparticles (NZVI) have achieved very interesting and promising results make them particularly attractive for the remediation of subsurface contaminants. In fact, a large number of laboratory and pilot studies have reported the high effectiveness of these NZVI-based technologies for the remediation of groundwater and contaminated soils. Although the results are often based on a limited contaminant target, there is a large gap between the amount of contaminants tested with NZVI at the laboratory level and those remediated at the pilot and field level. In this review, the main zero-valent iron nanoparticles and their remediation capacity are summarized, in addition to the pilot and land scale studies reported until date for each kind of nanomaterials.

Modeling and optimization of imidacloprid degradation by catalytic percarbonate oxidation using artificial neural network and Box-Behnken experimental design

Due to its toxicity and persistence, pesticide pollution poses a serious threat to human health and the environment. Imidacloprid or IMD is an archetypal neonicotinoid insecticide commonly used to protect a variety of crops worldwide. The present study examines the applicability of two numerical tools -- artificial neural network (ANN) and response surface methodology - Box Behnken design (RSM-BBD) -- to model and optimize oxidative IMD degradation by sodium percarbonate (SPC). The influences of SPC dose, Fe²⁺ catalyst dosage, and solution pH on IMD removal were evaluated. An ANN composed of an input layer with three neurons, a hidden layer with eight optimum neurons, and an output layer with one neuron was developed to map the complex non-linear process at different levels. Seventeen designed runs of different experimental conditions were derived from RSM-BBD. These experimental conditions and their response values showed to be best fitted in a reduced cubic model equation. Sensitivity analyses revealed the relative importance of the various components: Fe²⁺ (40.4%) > pH (31.1%) > SPC dose (28.5%). The two model were highly predictive with overall coefficients of determination and root-mean-square errors of 0.9983 and 0.31 for ANN, while 0.9996 and 0.20 for RSM-BBD. Overall, the present study established ANN and RSM-BBD as valuable and effective tools for catalytic SPC oxidation of IMD contaminants. SPC is a cleaner alternative to other oxidants for pesticide degradation as it is non-toxic, safe to handle, and produces by-products that inherently exist in the natural water matrix.

Removal of polycyclic aromatic hydrocarbons (PAHs) and the response of indigenous bacteria in highly contaminated aged soil after persulfate oxidation

Integrated chemical-biological treatment is a promising alternative to remove PAHs from contaminated soil, wherein indigenous bacteria is the key factor for the biodegradation of residual PAHs after the application of chemical oxidation. However, systematical study on the impact of persulfate (PS) oxidation on indigenous bacteria as well as PAHs removal is still scarce. In this study, the influences of different PS dosages (1%, 3%, 6%, and 10% [w/w]), as well as various activation methods (native iron, H₂O₂, alkaline, ferrous iron, and heat) on PAHs removal and indigenous bacteria in highly contaminated aged soil were investigated. Apparent degradation of PAHs in the soil treated with PS oxidation was observed, and the removal efficiency of total PAHs in the soil ranged from 38.28% to 79.97%. The removal efficiency of total PAHs in the soil increased with increasing consumption of PS. However, the bacterial abundance in soil was negatively affected following oxidation for all of the treatments added with PS, with bacterial abundance in the soil decreased by 0.89-2.93 orders of magnitude compared to the untreated soil. Moreover, the number of total bacteria in the soil decreased as PS consumption increased. Different PS activation methods and PS dosages exhibited different influences on the bacterial community composition. Bacteria capable of degrading PAHs under anoxic conditions were composed predominantly by Proteobacteria and Firmicutes. The total amount of Proteobacteria and Firmicutes also decreased with increasing consumption of PS. The results of this study provide important insight for the design of PAHs contaminated soil remediation projects.

FerrateVI oxidation of polycyclic aromatic compounds (PAHs and polar PACs) on DNAPL-spiked sand: degradation efficiency and oxygenated by-product formation compared to conventional oxidants

In situ chemical oxidations are known to remediate PAH contaminations in groundwater and soils. In this study, batch-scale oxidations aim to compare the PAC (polycyclic aromatic compound) degradation of three oxidation processes traditionally applied for soil treatment: permanganate, heat-activated persulfate (60 °C) and Fenton-like activated by magnetite, to results obtained with ferrates (Fe^VI). Widely studied for water treatments, ferrates are efficient on a wide range of pollutants with the advantage of producing nontoxic ferric sludge after reaction. However, fewer works focus on their action on soil, especially on semi-industrial grade ferrates (compatible with field application). Oxidations were carried out on sand spiked with dense non-aqueous phase liquid (DNAPL) sampled in the groundwater of a former coking plant. Conventional 16 US-EPA PAHs and polar PACs were monitored, especially potential oxygenated by-products that can be more harmful than parent-PAHs. After seven reaction days, only the Fenton-like showed limited degradation. Highest efficiencies were obtained for heat-activated persulfate with no O-PAC ketones formed. Permanganate gave important degradation, but ketones were generated in large amount. The tested ferrates not only gave slightly lower yields due to their auto-decomposition but also induced O-PAC ketone production, suggesting a reactional pathway dominated by oxidoreductive electron transfer, rather than a radical one.

Persulfate activation with rice husk-based magnetic biochar for degrading PAEs in marine sediments

Phthalate esters (PAEs) can interfere with the endocrine systems of humans and wildlife. The main objective of this study was to evaluate the suitability of a composite for remediating marine sediments contaminated with PAEs. The composite was synthesized with magnetite nanoparticles (Fe₃O₄) and rice husk biochar (RHB) by using chemical co-precipitation. Fe₃O₄, RHB, and Fe₃O₄-RHB substantially activated sodium persulfate (Na₂S₂O₈, PS) oxidation to form SO₄^-• and thus degrade PAEs in marine sediments in a slurry system. The morphology and structural composition of the magnetic composites were examined using XRD, FTIR, environmental scanning electron microscopy-energy-dispersive X-ray spectrometry, and superconducting quantum interference device. The Fe₃O₄-RHB composites were confirmed to be prepared successfully. The influences of various parameters, including the PS concentration, composite loading, and initial pH, were investigated. The concentration of high-molecular-weight PAEs (HPAEs) in sediment was much higher than that of low-molecular-weight PAEs (LPAEs); di-(2-ethylhexyl) phthalate (DEHP) was an especially salient marker of PAE contamination in sediments. Furthermore, increasing the PS and Fe₃O₄-RHB doses accelerated PAE oxidation at pH 3.0; 83% degradation of PAEs was achieved when the PS and Fe₃O₄-RHB concentrations were increased to 2.3 × 10^-2 mM and 1.67 g/L, respectively. LPAEs such as dibutyl phthalate (DnBP) are easier to degrade than HPAEs such as DEHP, diisononyl phthalate (DINP), and diisodecyl phthalate (DIDP). In addition, possible activation mechanisms of the interactions between S₂O₈^2- and Fe²⁺/Fe³⁺ on the Fe₃O₄ surface, which involve an efficient electron transfer mediator of the RHB oxygen functional groups promoting the generation of SO₄^-• in the Fe₃O₄-RHB/PS system, were clarified. Thus, the Fe₃O₄-RHB/PS oxidation process is expected to be a viable method for remediating PAE-contaminated marine sediment.

Activation of persulfate by CoO nanoparticles loaded on 3D mesoporous carbon nitride (CoO@meso-CN) for the degradation of methylene blue (MB)

A simple and facile synthesis method is developed for the fabrication of CoO loaded ordered mesoporous carbon nitride (CoO@meso-CN) composites, at various CoO loadings, and used, for the first time, to activate persulfate (PS) for methylene blue (MB) degradation. The interfacial interaction between the ultrafine CoO nanoparticles, immobilized by high surface area, regular mesopores, and graphitic nature of the meso-CN support can further enhance the catalytic activation of PS for methylene blue (MB) degradation. Among all catalysts studied, the 5-wt% CoO@meso-CN exhibits the best catalytic performance with a k_obs of 0.264 min^-1. High initial pH, especially at pH-11, is more beneficial for PS activation. Furthermore, the CoO@meso-CN nanocatalyst is highly stable with a consistently high degree of MB degradation and negligible cobalt leaching for at least 5 consecutive catalytic cycles. Both SO₄^- and OH are the major reactive species based on results of EPR and quenching experiments. The degradation intermediates of MB are also identified by HPLC/MS/MS and the possible degradation pathway is proposed. Results clearly demonstrate that CoO@meso-CN is a promising green catalyst with enormous potential for the remediation of hazardous chemicals using PS.

The impact of nanoparticles zero-valent iron (nZVI) and rhizosphere microorganisms on the phytoremediation ability of white willow and its response

Soil contaminated with heavy metals (HMs) is a serious problem throughout the world that threatens all living organisms in the soil. Therefore, large-scale remediation is necessary. This study investigated a new combination of remediation techniques on heavy metal contaminated soil, phytoremediation, and soil amendment with nano-sized zero-valent iron (nZVI) and rhizosphere microorganisms. White willow (Salix alba L.) was grown for 160 days in pots containing Pb, Cu, and Cd and amended with 0, 150, and 300 (mg kg^-1) of nZVI and rhizosphere microorganisms, including the arbuscular mycorrhizal fungus (AMF), Rhizophagus irregularis, and the plant growth promoting rhizobacteria (PGPR), Pseudomonas fluorescens. The results showed that inoculation with PGPR and AMF, particularly dual inoculation, improved plant growth as well as the physiological and biochemical parameters of white willow, and increased the bioconcentration factor (BCF) of Pb, Cu, and Cd. The low dose of nZVI significantly increased the root length and the leaf area of the seedlings and increased the BCF of Cd. In contrast, the high dose of nZVI had negative effects on the seedlings growth and the BCF of Pb and Cu, about - 32% and - 63%, respectively. Our results demonstrate that nZVI at low doses can improve plant performance in a phytoremediation context and that the use of beneficial rhizosphere microorganisms can minimize nZVI stress in plants and make them less susceptible to stress even under high dose conditions.

Sodium Persulfate and Potassium Permanganate Inhibit Methanogens and Methanogenesis in Stored Liquid Dairy Manure

Stored liquid dairy manure is a hotspot for methane (CH) emission, thus effective mitigation strategies are required. We assessed sodium persulfate (NaSO), potassium permanganate (KMnO), and sodium hypochlorite (NaOCl) for impacts on the abundance of microbial communities and CH production in liquid dairy manure. Liquid dairy manure treated with different rates (1, 3, 6, and 9 g or mL L slurry) of these chemicals or their combinations were incubated under anoxic conditions at 22.5 ± 1.3°C for 120 d. Untreated and sodium 2-bromoethanesulfonate (BES)-treated manures were included as negative and positive controls, respectively, whereas sulfuric acid (HSO)-treated manure was used as a reference. Quantitative real-time polymerase chain reaction was used to quantify the abundances of bacteria and methanogens on Days 0, 60, and 120. Headspace CH/CO ratios were used as a proxy to determine CH production. Unlike bacterial abundance, methanogen abundance and CH/CO ratios varied with treatments. Addition of 1 to 9 g L slurry of NaSO and KMnO reduced methanogen abundance (up to ∼28%) and peak CH/CO ratios (up to 92-fold). Except at the lowest rate, chemical combinations also reduced the abundance of methanogens (up to ∼17%) and CH/CO ratios (up to ninefold), although no impacts were observed when 3% NaOCl was used alone. With slurry acidification, the ratios reduced up to twofold, whereas methanogen abundance was unaffected. Results suggest that NaSO and KMnO may offer alternative options to reduce CH emission from stored liquid dairy manure, but this warrants further assessment at larger scales for environmental impacts and characteristics of the treated manure.

Remediation of contaminated soils by enhanced nanoscale zero valent iron

The use of nanoscale zero valent iron (nZVI) for in situ remediation of soil contamination caused by heavy metals and organic pollutants has drawn great concern, primarily owing to its potential for excellent activity, low cost and low toxicity. This reviews considers recent advances in our understanding of the role of nZVI and enhanced nZVI strategy in the remediation of heavy metals and persistent organic contaminants polluted soil. The performance, the migration and transformation of nZVI affected by the soil physical and chemical conditions are summarized. However, the addition of nZVI inevitably disturbs the soil ecosystem, thus the impacts of nZVI on soil organisms are discussed. In order to further investigate the remediation effect of nZVI, physical, chemical and biological method combination with nZVI was developed to enhance the performance of nZVI. From a high efficient and environmentally friendly perspective, biological method enhanced nZVI technology will be future research needs. Possible improvement of nZVI-based materials and potential areas for further applications in soil remediation are also proposed.

Simultaneous removal of PAHs and metal contaminants from water using magnetic nanoparticle adsorbents

Many industrial wastewaters are contaminated with both heavy metal ions and organic compounds, posing a major threat to public health and the environment. In this study, magnetic nanoparticle adsorbents, namely Mag-PCMA-T, which contain a maghemite core and a silica mesoporous layer that permanently confines surfactant micelles within the mesopores, were synthesized to achieve simultaneous removal of polycyclic aromatic hydrocarbons (PAHs) (1mg/L) and metal contaminants (1mg/L). The individual removal efficiency of Cd(2+) and acenaphthene using Mag-PCMA-T was evaluated under a range of initial ion concentrations and adsorbent dosages, as well as the competitive adsorption with Cd(2+) and acenaphthene simultaneously present. The isotherms and kinetics of Cd(2+) and acenaphthene sorption onto Mag-PCMA-T were determined. Mag-PCMA-T removed >85% of the acenaphthene in <30min, with relatively high sorption capacity (up to 1060mg/kg). Mag-PCMA-T also exhibited high sorption capacity for Cd(2+) (up to 2250mg/kg). The simultaneous sorption performance was stable across a wide pH range (4-9) as well as in the presence of competitive metal ions (Ca(2+) and Mg(2+)) or natural organic matters. The Mag-PCMA-T can be regenerated and reused, providing a sustainable, fast, convenient, and efficient approach for water treatment.

Fate of iron and polycyclic aromatic hydrocarbons during the remediation of a contaminated soil using iron-activated persulfate: A column study

Remediation of contaminated soils under flow-through conditions is an issue of great interest since it provides a better approach to real case applications than batch experiments. In this work, a column filled with soil, artificially spiked and aged for three months with Phenanthrene (PHE), Anthracene (ANT), Pyrene (PYR) and Benzo(a)pyrene (BaP), was treated for 25days with persulfate (PS) activated by Fe(3+) and nanoparticles of zerovalent iron (nZVI). Effects of type of iron fed into the column (Fe(3+) or nZVI) and nZVI concentration were studied. PS inlet concentration was 0.2mmolcm(-3) and residence time in the column was close to 1.72days. Iron, PS and polycyclic aromatic hydrocarbons (PAHs) concentration, as well as pH, were monitored during treatment. Concentration profiles of iron and PAHs were observed along the column, with higher iron concentrations and higher PAHs removal efficiencies in the closest sections to the column entrance. BaP and ANT were completely depleted regardless the conditions used, but PHE and PYR showed higher resistance to oxidation, achieving near a 90% removal in the closest sections to the injection source in all runs, but decreasing significantly with column length. Besides, natural degradation of ANT resulted in the formation 9.10-anthraquinone (ATQ), an oxy-PAH which showed higher resistance than PHE and PYR. Although higher PAHs removal efficiencies were achieved when nZVI was used as activator, only a moderate improvement was noticed when the highest concentration of nZVI was used as a consequence of radical scavenging by an excess of Fe(2+). Finally, a kinetic model based on runs performed in batch, from a previous work, was able to predict the experimental average concentrations of PAHs in the column when Fe(3+) was used as activator.

Nanoscale zero-valent metals: a review of synthesis, characterization, and applications to environmental remediation

Engineered nanoscale zero-valent metals (NZVMs) representing the forefront of technologies have been considered as promising materials for environmental remediation and antimicrobial effect, due to their high reducibility and strong adsorption capability. This review is focused on the methodology for synthesis of bare NZVMs, supported NZVMs, modified NZVMs, and bimetallic systems with both traditional and green methods. Recent studies have demonstrated that self-assembly methods can play an important role for obtaining ordered, controllable, and tunable NZVMs. In addition to common characterization methods, the state-of-the-art methods have been developed to obtain the properties of NZVMs (e.g., granularity, size distribution, specific surface area, shape, crystal form, and chemical bond) with the resolution down to subnanometer scale. These methods include spherical aberration corrected scanning transmission electron microscopy (Cs-corrected STEM), electron energy-loss spectroscopy (EELS), and near edge X-ray absorption fine structure (NEXAFS). A growing body of experimental data has proven that nanoscale zero-valent iron (NZVI) is highly effective and versatile. This article discusses the applications of NZVMs to treatment of heavy metals, halogenated organic compounds, polycyclic aromatic hydrocarbons, nutrients, radioelements, and microorganisms, using both ex situ and in situ methods. Furthermore, this paper briefly describes the ecotoxicological effects for NZVMs and the research prospects related to their synthesis, modification, characterization, and applications.

Treatability assessment of polycyclic aromatic hydrocarbons contaminated marine sediments using permanganate, persulfate and Fenton oxidation processes

Various chemical oxidation techniques, such as potassium permanganate (KMnO4), sodium persulfate (Na2S2O8), Fenton (H2O2/Fe(2+)), and the modified persulfate and Fenton reagents (activated by ferrous complexes), were carried out to treat marine sediments that were contaminated with polycyclic aromatic hydrocarbons (PAHs) and dredged from Kaohsiung Harbor in Taiwan. Experimental results revealed that KMnO4 was the most effective of the tested oxidants in PAH degradation. Owing to the high organic matter content in the sediment that reduced the efficiencies of Na2S2O8 and regular Fenton reactions, a large excess of oxidant was required. Nevertheless, KH2PO4, Na4P2O7 and four chelating agents (EDTA, sodium citrate, oxalic acid, and sodium oxalate) were utilized to stabilize Fe(II) in activating the Na2S2O8 and Fenton oxidations, while Fe(II)-citrate remarkably promoted the PAH degradation. Increasing the molecular weight and number of rings of PAH did not affect the overall removal efficiencies. The correlation between the effectiveness of the oxidation processes and the physicochemical properties of individual PAH was statistically analyzed. The data implied that the reactivity of PAH (electron affinity and ionization potential) affected its treatability more than did its hydrophobicity (Kow, Koc and Sw), particularly using experimental conditions under which PAHs could be effectively oxidized.

Degradation of organic contaminants by activated persulfate using zero valent copper in acidic aqueous conditions

Persulfate can accelerate the corrosion of nZVC to release Cu⁺ in the acidic aqueous condition, and the reactive radicals were generated through the further activation of persulfate by intermediate Cu⁺via a Fenton-like reaction.