Design, synthesis and biological evaluation of novel hydroxy-phenyl-1H-benzimidazoles as radical scavengers and UV-protective agents

Truxillic calcium supramolecular skeleton fortified pH responsive and biodegradable alginate hydrogel films promoting fruit preservation

This work presented a unique alginate hydrogel film fortified by truxillic calcium skeleton with notable physicochemical and mechanical properties, as well as the promising application in fruit preservation. A series of truxillic‑calcium-alginate (CBDA-Ca/SA) films were prepared. It was found that CBDA-10-Ca/SA can block over 50 % of UV-visible light. The maximum breaking strengths of (6 % CBDA-1-Ca)/SA and (2 % CBDA-10-Ca)/SA are 82 MPa and 79 MPa, about twice that of Ca/SA. CBDA-11-Ca/SA showed the highest WVP of 2.18 × 10-10 g ∙ m-1 ∙ s-1 ∙ Pa-1 and CBDA-10-Ca showed the best performance in reducing the OTR of the films by 4.1× 10-5 cm3 ⸱cm ⸱ m-2 ⸱ 24 h-1 ⸱ Pa-1. With water absorption ranging from 3480 % in an acidic environment to 9520 % in an alkaline environment, the CBDA-10-Ca/SA film demonstrated exceptional pH responsiveness. The degradation rate of all films was around 70 % after four weeks of burial under the soil. The above studies indicate that polyphenols can not only act as "hooks" to grasp Ca2+ to form supramolecular skeleton structure improving the mechanical strength of SA-based films, but also act as active components to endure the functional properties of SA-based films with antibacterial and antioxidant properties.

Biomineralization: A new tool for developing eco-sustainable Ti-doped hydroxyapatite-based hybrid UV filters

It is well known that the prolonged exposure to UV radiation from sunlight can compromise human health and is particularly damaging to the skin, leading to sunburn, photo-aging and skin cancer. Sunscreen formulations containing UV-filters present a barrier against solar UV and help to mitigate the harmful effects however, concern about their safety for both human and environmental health is still a much-debated topic. EC regulations classify UV-filters depending on their chemical nature, particle size, and mechanism of action. Furthermore, it regulates their use in cosmetic products with specific limitations in terms of concentration (organic UV filters) and particle size and surface modification to reduce their photo-activity (mineral UV filters). The regulations have prompted researchers to identify new materials that show promise for use in sunscreens. In this work, biomimetic hybrid materials composed of titanium-doped hydroxyapatite (TiHA) grown on two different organic templates, derived from animal (gelatin - from pig skin) and vegetable (alginate - from algae) sources. These novel materials were developed and characterized to obtain sustainable UV-filters as a safer alternative for both human and ecosystem health. This 'biomineralization' process yielded TiHA nanoparticles that demonstrated high UV reflectance, low photoactivity, good biocompatibility and an aggregate morphology which prevents dermal penetration. The materials are safe for topical application and for the marine environment; moreover, they can protect organic sunscreen components from photodegradation and yield long-lasting protection.

New 2-(2,4-Dihydroxyphenyl)benzimidazolines

New 2-(2,4-dihydroxyphenyl)benzimidazolines are synthesized in an easily accessible approach. The method is based on the reaction of resorcinol with in situ-formed electrophilic N-ethoxycarbonylbenzimidazolium reagents. The structure of the two newly formed products was spectrally characterized by 1D and 2D NMR, IR, and MS spectral analyses.

Recognition-Induced Enhanced Emission of Core-Fluorescent ESIPT-type Macrocycles

Core-fluorescent cavitands based on 2-(2'-resorcinol)benzimidazole fluorophores (RBIs) merged with the resorcin[4]arene skeleton were designed and synthesized. The cavitands, due to the presence of intramolecular hydrogen bonds and increased acidity, show excited state intramolecular proton transfer (ESIPT) and readily undergo deprotonation to form dianionic cavitands, capable of strong binding to organic cations. The changes in fluorescence are induced by deprotonation and binding events and involve huge Stokes shifts (due to emission from anionic double keto tautomers) and cation-selective enhancement of emission originating from the restriction of intramolecular motion (RIR) upon recognition in the cavity. Ab initio calculations indicate that the macrocyclic scaffold stabilizes the ground state tautomeric forms of the fluorophores that are not observed for non-macrocyclic analogs. In the excited state, the emitting forms for both macrocyclic scaffolds and non-macrocyclic analogs are anionic double keto tautomers, which are the result of excited state intramolecular proton transfer (ESIPT) or excited state double proton transfer (ESDPT).

Phenolic furanochromene hydrazone derivatives: Synthesis, antioxidant activity, ferroptosis inhibition, DNA cleavage and DNA molecular docking studies

Twenty-four phenolic furanochromene hydrazone derivatives were designed and synthesized in order to evaluate structure-activity relationships in a series of antioxidant-related assays. The derivatives have varying substitution patterns on the phenol ring, with some compounds having one, two or three hydroxy groups, and others containing one hydroxy group in combination with methoxy, methyl, bromo, iodo and/or nitro groups. Antioxidant activity was determined using the DPPH free radical scavenging and CUPRAC assays. Compounds containing ortho-dihydroxy and para-dihydroxy patterns had the highest free radical scavenging activity, with IC50 values ranging from 5.0 to 28 μM. Similarly, derivatives with ortho-dihydroxy and para-dihydroxy patterns, together with a 4-hydroxy-3,5‑dimethoxy pattern, displayed strong copper (II) ion reducing capacity, using Trolox as a standard. Trolox equivalent antioxidant capacity (TEAC) coefficients for these derivatives ranged from 1.75 to 3.97. As further evidence of antioxidant potential, greater than half of the derivatives reversed erastin-induced ferroptosis in HaCaT cells. In addition, twenty-three of the derivatives were effective at cleaving supercoiled plasmid DNA in the presence of copper (II) ions at 1 mM, with the 3,4‑dihydroxy derivative showing cleavage to both the linear and open circular forms at 3.9 uM. The interaction of the phenolic furanochromene derivatives with DNA was confirmed by molecular docking studies, which revealed that all the derivatives bind favorably in the minor groove of DNA.

Expert Systems for Predicting the Bioavailability of Sun Filters in Cosmetic Products, Software vs. Expert Formulator: The Benzophenone-3 Case

There are only a limited number of molecules in a cosmetic formulation, which can passively cross the stratum corneum and be absorbed into the skin layers. However, some actives should never cross the skin in large concentrations due to their potential for side effects, for example, sunscreens. Artificial intelligence is gaining an increasing role as a predictive tool, and in this regard, we selected the Formulating for Efficacy^® Software to forecast the changes in bioavailability of selected topical cosmetic compounds. Using the Franz diffusion cell methodology, various oils were selected as those with low release capability, and these were compared to those suggested by the software in Benzophenone-3-containing formulations. The software was able to predict the lipophilic phases, which, if utilized in the emulsion, were stable and sometimes even more pleasant in appearance and consistency than the reference emulsions prepared by the formulator. To date, however, Formulating for Efficacy^® Software still has limitations as far as predicting the hydrophilic phase, as well as not being able to choose the emulsifier or the preservative system.

Vibrational Spectroscopy, Quantum Computational and Molecular Docking Studies on 2-[(1H-Benzimidazol-1-yl)-methyl]benzoic Acid

Experimental and theoretical investigations on the optimized geometrical structure, electronic and vibrational features of 2-[(1H-benzimidazol-1-yl)-methyl]benzoic acid are provided using the B3LYP/6-311++G(d,p) basis set. The Vibrational Energy Distribution Analysis (VEDA) program was used to perform the vibrational assignments and calculate the Potential Energy Distribution (PED). The acquired FT-IR and FT Raman data were used to complete the vibrational assignment and characterization of the compound fundamental modes. Theoretical and actual NMR chemical shifts were found to be quite similar. The UV-vis spectrum of 21HBMBA, as well as effects of solvents, have been investigated. The calculated HOMO and LUMO energies reveal that charge transfer happens within the molecule and MEP surface to be a chemically reactive area appropriate for drug action. Furthermore, a thorough examination of Non-Bonding Orbitals, excitation energies, AIM charges, Fukui functions and the Electron Localization Function (ELF) is carried out. The research is also expanded to compute first-order hyperpolarizability and forecast NLO characteristics. The details of the docking studies aided in the prediction of protein binding.

UV Filters: Challenges and Prospects

The use of sunscreens is an established and recommended practice to protect skin from solar-induced damage. Around 30 UV filters can be used in sunscreen products in the European Union, which ought to follow the requirements of the regulation 1223/2009 to ensure their efficacy and safety for humans. Nevertheless, low photostability and putative toxicity for humans and environment have been reported for some UV filters. Particularly, the negative impact in marine organisms has recently raised concern on the scientific community. Therefore, it is important to develop new UV filters with improved safety profile and photostability. Over the last two decades, nearly 200 new compounds have revealed promising photoprotection properties. The explored compounds were obtained through different approaches, including exploration of natural sources, synthetic pathways, and nanotechnology. Almost 50 natural products and around 140 synthetic derivatives, such as benzimidazoles, benzotriazoles, hydroxycinnamic acids, xanthones, triazines, among others, have been studied aiming the discovery of novel, effective, and safer future photoprotective agents. Herein, we provide the reader with an overview about UV filters’ challenges and prospects, offering a forward-looking to the next-generation of UV filters.

Environmental exposures associated with honey bee health

Bee health is declining on a global scale, yet the exact causes and their interactions responsible for the decline remain unknown. To more objectively study bee health, recently biomarkers have been proposed as an essential tool, because they can be rapidly quantified and standardized, serving as a comparable measure across bee species and varying environments. Here, we used a systems biology approach to draw associations between endogenous and exogenous chemical profiles, with pesticide exposure, or the abundance of the 21 most common honey bee diseases. From the analysis we identified chemical biomarkers for both pesticide exposure and bee diseases along with the mechanistic biological pathways that may influence disease onset and progression. We found a total of 2352 chemical features, from 30 different hives, sampled from seven different locations. Of these, a total of 1088 significant associations were found that could serve as chemical biomarker profiles for predicting both pesticide exposure and the presence of diseases in a bee colony. In almost all cases we found novel external environmental exposures within the top seven associations with bee diseases and pesticide exposures, with the majority having previously unknown connections to bee health. We highlight the exposure-outcome paradigm and its ability to identify previously uncategorized interactions from different environmental exposures associated with bee diseases, pesticides, mechanisms, and potential synergistic interactions of these that are responsible for honey bee health decline.

Calcium-Based Biomineralization: A Smart Approach for the Design of Novel Multifunctional Hybrid Materials

Biomineralization consists of a complex cascade of phenomena generating hybrid nano-structured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce highly biomimetic and biocompatible materials resembling natural hard tissues such as bones and teeth. In detail, biomimetic materials, composed of hydroxyapatite nanoparticles (HA) nucleated on an organic matrix, show extremely versatile chemical compositions and physical properties, which can be controlled to address specific challenges. Indeed, different parameters, including (i) the partial substitution of mimetic doping ions within the HA lattice, (ii) the use of different organic matrices, and (iii) the choice of cross-linking processes, can be finely tuned. In the present review, we mainly focused on calcium biomineralization. Besides regenerative medicine, these multifunctional materials have been largely exploited for other applications including 3D printable materials and in vitro three-dimensional (3D) models for cancer studies and for drug testing. Additionally, biomineralized multifunctional nano-particles can be involved in applications ranging from nanomedicine as fully bioresorbable drug delivery systems to the development of innovative and eco-sustainable UV physical filters for skin protection from solar radiations.

(+)-Usnic Acid as a Promising Candidate for a Safe and Stable Topical Photoprotective Agent

The study aimed to examine whether usnic acid—a lichen compound with UV-absorbing properties—can be considered as a prospective photoprotective agent in cosmetic products. Moreover, a comparison of two usnic acid enantiomers was performed to preselect the more effective compound. To meet this aim, an in vitro model was created, comprising the determination of skin-penetrating properties via skin-PAMPA assay, safety assessment to normal human skin cells (keratinocytes, melanocytes, fibroblasts), and examination of photostability and photoprotective properties. Both enantiomers revealed comparable good skin-penetrating properties. Left-handed usnic acid was slightly more toxic to keratinocytes (IC₅₀ 80.82 and 40.12 µg/mL, after 48 and 72 h, respectively) than its right-handed counterpart. The latter enantiomer, in a cosmetic formulation, was characterized by good photoprotective properties and photostability, comparable to the UV filter octocrylene. Perhaps most interestingly, (+)-usnic acid combined with octocrylene in one formulation revealed enhanced photoprotection and photostability. Thus, the strategy can be considered for the potential use of (+)-usnic acid as a UV filter in cosmetic products. Moreover, the proposed model may be useful for the evaluation of candidates for UV filters.

The Involvement of Xanthone and (E)-Cinnamoyl Chromophores for the Design and Synthesis of Novel Sunscreening Agents

Excessive UV exposure contributes to several pathological conditions like skin burns, erythema, premature skin aging, photodermatoses, immunosuppression, and skin carcinogenesis. Effective protection from UV radiation may be achieved with the use of sunscreens containing UV filters. Currently used UV filters are characterized by some limitations including systemic absorption, endocrine disruption, skin allergy induction, and cytotoxicity. In the research centers all over the world new molecules are developed to improve the safety, photostability, solubility, and absorption profile of new derivatives. In our study, we designed and synthesized seventeen novel molecules by combining in the structures two chromophores: xanthone and (E)-cinnamoyl moiety. The ultraviolet spectroscopic properties of the tested compounds were confirmed in chloroform solutions. They acted as UVB or UVA/UVB absorbers. The most promising compound 9 (6-methoxy-9-oxo-9H-xanthen-2-yl)methyl (E)-3-(2,4-dimethoxyphenyl)acrylate) absorbed UV radiation in the range 290-369 nm. Its photoprotective activity and functional photostability were further evaluated after wet milling and incorporation in the cream base. This tested formulation with compound 9 possessed very beneficial UV protection parameters (SPFin vitro of 19.69 ± 0.46 and UVA PF of 12.64 ± 0.32) which were similar as broad-spectrum UV filter tris-biphenyl triazine. Additionally, compound 9 was characterized by high values of critical wavelength (381 nm) and UVA/UVB ratio (0.830) thus it was a good candidate for broad-spectrum UV filter and it might protect skin against UVA-induced photoaging. Compound 9 were also shown to be photostable, non-cytotoxic at concentrations up to 50 µM when tested on five cell lines, and non-mutagenic in Ames test. It also possessed no estrogenic activity, according to the results of MCF-7 breast cancer model. Additionally, its favorable lipophilicity (miLogP = 5.62) does not predispose it to penetrate across the skin after topical application.

Skin Damages-Structure Activity Relationship of Benzimidazole Derivatives Bearing a 5-Membered Ring System

In the search for scaffolds for multifunctional compounds we investigated the structure activity relationship of a class of benzimidazole derivatives bearing 5-membered ring. The newly synthesized and the already known compounds were divided into three classes that present different substituent at 5 position of the benzimidazole ring (-H, -COOH or –SO₃H) and different heterocycle at position 2 (thiophene, furan or pyrrole). All the derivatives were synthesized and tested to determine their photoprotective profile against UV rays, in vitro antioxidant capacity against different radicals (DPPH and FRAP test), antifungal inhibitory activity (dermatophytes and Candida albicans), antiviral and antiproliferative activity. A Structure-Activity Relationship study indicated compound 10, bearing a pyrrole heterocycle on the benzimidazole ring, as the best multifunctional derivative of the series and as potential candidate for the development of drugs especially in case of melanoma.

Accelerated microdroplet synthesis of benzimidazoles by nucleophilic addition to protonated carboxylic acids

We report a metal-free novel route for the accelerated synthesis of benzimidazole and its derivatives in the ambient atmosphere. The synthetic procedure involves 1,2-aromatic diamines and alkyl or aryl carboxylic acids reacting in electrostatically charged microdroplets generated using a nano-electrospray (nESI) ion source. The reactions are accelerated by orders of magnitude in comparison to the bulk. No other acid, base or catalyst is used. Online analysis of the microdroplet accelerated reaction products is performed by mass spectrometry. We provide evidence for an acid catalyzed reaction mechanism based on identification of the intermediate arylamides. Their dehydration to give benzimidazoles occurs in a subsequent thermally enhanced step. It is suggested that the extraordinary acidity at the droplet surface allows the carboxylic acid to function as a C-centered electrophile. Comparisons of this methodology with data from thin film and bulk synthesis lead to the proposal of three key steps in the reaction: (i) formation of an unusual reagent (protonated carboxylic acid) because of the extraordinary conditions at the droplet interface, (ii) accelerated bimolecular reaction because of limited solvation at the interface and (iii) thermally assisted elimination of water. Eleven examples are shown as evidence of the scope of this chemistry. The accelerated synthesis has been scaled-up to establish the substituent-dependence and to isolate products for NMR characterization.

Design, synthesis and evaluation of benzothiazole derivatives as multifunctional agents

Oxidative stress is the product or aetiology of various multifactorial diseases; on the other hand, the development of multifunctional compounds is a recognized strategy for the control of complex diseases. To this end, a series of benzothiazole derivatives was synthesized and evaluated for their multifunctional effectiveness as antioxidant, sunscreen (filter), antifungal and antiproliferative agents. Compounds were easily synthesized via condensation reaction between 2-aminothiophenols and different benzaldehydes. SAR study, particularly in position 2 and 6 of benzothiazoles, led to the identification of 4g and 4k as very interesting potential compounds for the design of multifunctional drugs. In particular, compound 4g is the best blocker of hERG potassium channels expressed in HEK 293 cells exhibiting 60.32% inhibition with IC₅₀ = 4.79 μM.

In-Vitro Evaluation of Antioxidant, Antiproliferative and Photo-Protective Activities of Benzimidazolehydrazone Derivatives

In the search of multifunctional compounds we designed benzimidazole derivatives endowed with phenolic hydroxy groups and a hydrazone moiety as potential radical-scavenger and the antioxidant agents. The target molecules have been prepared by a simple synthetic procedure and tested for their antioxidant activity by DPPH, FRAP, and ORAC test, for photoprotective activity against UV rays and for antiproliferative activity against Colo-38 melanoma cells. Furthermore, two different dermocosmetic formulations were prepared with the compounds endowed with the best antioxidant and photoprotective profile and their release from formulation evaluated using Franz Cells system. High antioxidant activity is related to the presence of at least two hydroxy groups on arylidene moiety of benzimidazoles. Structure activity analysis revealed that the position of hydroxy groups is crucial for antioxidant activity as well as the presence of a 2-hydroxy-4-(diethylamino)arylidene group. The same correlation pattern was found to be related to photoprotective activity resulting in an UVA Protection Factor better than the commercial solar filter PBSA and antiproliferative activity against melanoma cells without producing cytotoxicity on normal keratinocytes. The release analysis indicated that high antioxidant activities are achieved with limited release at concentration compatible with the use as UV sunscreen filter.

Experimental and in silico assessment of fate and effects of the UV filter 2-phenylbenzimidazole 5-sulfonic acid and its phototransformation products in aquatic solutions

Often ingredients of personal care products are present in treated wastewaters, e. g grey water (GW), and are discharged into aquatic systems. Conventional treatment of GW does not fully eliminate micropollutants such as the UV filter substance 2-phenylbenzimidazole-5-sulfonic acid (PBSA). Photolysis has been proposed as an alternative treatment method for other micropollutants, but it is not clear yet whether it can also be used to eliminate PBSA. One goal of this study was to better understand the basic pathways involved in this process. It aimed to identify photo-transformation products (PTPs) by using, in the test conditions, an initial concentration of PBSA higher than those expected in the environment. The photolysis experiments were carried out using Xenon and UV lamps. Under Xenon irradiation only slight primary elimination was found. UV irradiation resulted in almost complete primary elimination of PBSA but not in full mineralization. Four isomeric mono-hydroxylated PTPs were identified by high resolution mass spectrometry (HRMS) which could be confirmed by other studies. A modified luminescent bacteria test (LBT) with Vibrio fischeri was employed to assess acute and chronic toxic effects of the irradiated photolytic mixtures. A strong correlation was found between the kinetics of two of the PTPs and luminescence inhibition indicating bacterial toxicity. Using a set of in silico quantitative structure-activity relationship (QSAR) models, this study also offered new insights concerning the environmental fate and toxicity of the TPs of PBSA as the TPs generated by UV-treatment are more persistent and partly more toxic than PBSA.

A New Approach to UV Protection by Direct Surface Functionalization of TiO2 with the Antioxidant Polyphenol Dihydroxyphenyl Benzimidazole Carboxylic Acid

Skin cancer is the most common malignant cancer with an incidence of 1 million cases/year. It is well known that exposure to UV radiation from sunlight leads the most frequent risk factors for several skin disorders including skin cancer. Sunscreen filters represent a valid protection against dangerous effects derived from UV radiation, and they can be divided in organic and inorganic UV filters. Adding, at the product formulation, molecules with booster effect, or also substances that can increase the protecting effectiveness via synergic mechanisms, can further enhance their protection activity. Moreover, this approach leads to develop formulations with high SPF (Sun Protection Factor) with a reduced content of UV filters, this is in line with the recent decisions of yet a few countries (Palau, Thailand, Philippines, and Hawaii) to ban some sunscreen filters to preserve marine environments (i.e., reef). In this work, a new class of sunscreen UV filters has been synthesized, by means the combination of physical filter and Oxisol, an antioxidant molecule with booster effect. In this study, the synthesis of new physical multifunctional ingredients is reported, by means the direct surface functionalization of inorganic filters (in particular TiO₂) with Oxisol. In this study, the full characterization of these multifunctional ingredients is also reported, in addition to the cytotoxicity tests, the photocatalytic activity and the rheological properties involved on skin application.

Synthesis and Characterization of New Multifunctional Self-Boosted Filters for UV Protection: ZnO Complex with Dihydroxyphenyl Benzimidazole Carboxylic Acid

The incidence of skin cancer is increasing both because of climate change and the increase in pollution than people’s incorrect habits of sun exposure. In these regards, sunscreen and photoprotection are essential tools in consenting the benefits induced by safe solar light exposition and skin cancer prevention. In this work, a new class of sunscreen filter was synthesized by chemical combination of a physical filter (ZnO) and Oxisol (dihydroxyphenyl benzimidazole carboxylic acid), an antioxidant molecule with booster effect. In this work, a new class of filters with new properties was achieved by direct functionalization of particles surface. A full characterization of this multifunctional ingredient (ZnO–Ox) was conducted: Compared with the simple mixture, the new filter acts as a multifunctional molecule showing a higher Sun Protection Factor (SPF), a better cytotoxic profile (MTT and NRU assay), and anti-acne activity. A strong reduction of photocatalytic activity of ZnO was observed, also improving the safety profile.

Discovery of Novel UV-Filters with Favorable Safety Profiles in the 5-Arylideneimidazolidine-2,4-dione Derivatives Group

Effective protection from the harmful effects of UV radiation may be achieved by using sunscreens containing organic or inorganic UV filters. The number of currently available UV filters is limited and some of the allowed molecules possess limitations such as systemic absorption, endocrine disruption properties, contact and photocontact allergy induction, and low photostability. In the search for new organic UV filters we designed and synthesized a series consisting of 5-benzylidene and 5-(3-phenylprop-2-en-1-ylidene)imidazolidine-2,4-dione (hydantoin) derivatives. The photoprotective activity of the tested compounds was confirmed in methanol solutions and macrogol formulations. The most promising compounds possessed similar UV protection parameter values as selected commercially available UV filters. The compound diethyl 2,2'-((Z)-4-((E)-3-(4-methoxyphenyl)allylidene)-2,5-dioxoimidazolidine-1,3-diyl)diacetate (4g) was characterized as an especially efficient UVA photoprotective agent with a UVA PF of 6.83 ± 0.05 and favorable photostability. Diethyl 2,2'-((Z)-4-(4-methoxybenzylidene)-2,5-dioxo- imidazolidine-1,3-diyl)diacetate (3b) was the most promising UVB-filter, with a SPFin vitro of 3.07 ± 0.04 and very good solubility and photostability. The main photodegradation products were geometric isomers of the parent compounds. These compounds were also shown to be non-cytotoxic at concentrations up to 50 µM when tested on three types of human skin cells and possess no estrogenic activity, according to the results of a MCF-7 breast cancer model.

Benzofuran hydrazones as potential scaffold in the development of multifunctional drugs: Synthesis and evaluation of antioxidant, photoprotective and antiproliferative activity

New benzofuranhydrazones 3-12 were easily prepared and assayed for their radical-scavenging ability. Hydrazones 3-12 showed different extent antioxidant activity in DPPH, FRAP and ORAC assays. Good antioxidant activity is related to the number and position of hydroxyl groups on the arylidene moiety. High antioxidant activity is showed by the 2-hydroxy-4-(diethylamino)benzylidene derivative 11. Furthermore, hydrazones 3-12 showed photoprotective capacities with satisfactory in vitro SPF as compared to the commercial PBSA sunscreen filter. The antiproliferative effects of the hydrazones 3-12 was tested on erythroleukemia K562 and Colo-38 melanoma human cells. All the compounds showed growth inhibition in the micromolar to sub micromolar concentration range. If taken together these results points to benzofuran hydrazones as potential multifunctional molecules especially in the treatment of neoplastic diseases being the good antioxidant properties of 5, 7 and 11 correlated to their high antiproliferative activity.