Floating treatment wetlands as biological buoyant filters for wastewater reclamation

Efficiency of phytoremediation and identification of biotransformation pathways of fluoroquinolones in the aquatic environment

Phytoremediation is a low-cost and sustainable green technology that uses plants to remove organic and inorganic pollutants from aquatic environments. The aim of this study was to investigate the phytoextraction, phytoaccumulation, and phytotransformation of three fluoroquinolones (FQs) (ciprofloxacin [CIP], enrofloxacin [ENF], and levofloxacin [LVF]) by Japanese radish (Raphanus sativus var. longipinnatus) and duckweed (Lemma minor). Determination of FQs and identification of their transformation products (TPs) were performed using ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS). Inter-tissue translocation of FQs in Japanese radish tissues depended on their initial concentration in the medium. CIP (IT = 14.4) and ENF (IT = 17.0) accumulated mainly in radish roots, while LVF in leaves (IT = 230.8) at an initial concentration of 10 µg g-1. CIP (2,104 ng g-1) was detected in the highest concentration, followed by ENF (426.3 ng g-1) and LVF (273.3 ng g-1) in the tissues of both plants. FQs' bioaccumulation factors were significantly higher for duckweed (1.490-18.240) than Japanese radish (0.027-0.103). The removal of FQs from water using duckweed was mainly due to their photolysis and hydrolysis than plant sorption. In the screening, analysis detected 29 FQ TPs. The biotransformation pathways of FQs are described in detail, and the factors that influence their formation are indicated.

Use of ornamental plants in floating treatment wetlands for greywater treatment in urban areas

Floating treatment wetlands are considered a promising and low-cost technology for the treatment of polluted water and wastewater. However, their functionality and efficiency in different types of wastewater are not fully understood. In this study, several ornamental plant species (monocultures: Canna sp., Iris sp., polyculture: Iris orientalis, Cyperus sp., Acorus gramineus) were tested in two different types of floating mats, including a media supported floating mat (MSFM) or a simple plastic grid, and evaluated for optimal removal of the studied pollutants. The results regarding pollutant removal revealed that planted systems grown in MSFM achieved significantly higher removal rates (up to 90 %) compared to the plastic grid (up to 80 %). Statistically significant higher removal rates were obtained for the planted systems compared to the unplanted systems either grown in MSFM (for turbidity (planted: 82-90 %; unplanted: 44 %), COD (planted: 74-84 %; unplanted: 32 %) and BOD5 (planted: 76-85 %; unplanted: 51 %), respectively) or grown in the plastic grid (for turbidity (planted: 64-78 %; unplanted: 44 %) and COD (planted: 43-75 %; unplanted: 32 %), respectively). During the experimental period (7 months), all plants managed to survive and withstand the weather variations. The plants in polyculture followed by Iris sp. plants in plastic grid floating mats were better adapted, as indicated by maximum quantum efficiency of PSII values and chlorophyll content index, while all the plants were considered well adapted in the MSFM. Overall, the implementation of floating treatment wetlands with ornamental vegetation for greywater treatment in urban areas seems to be a sustainable and efficient approach.

Industrial wastewater treatment using floating wetlands: a review

Industrial wastewater generated from various production processes is often associated with elevated pollutant concentrations and environmental hazards, necessitating efficient treatment. Floating wetlands (FWs) have emerged as a promising and eco-friendly solution for industrial wastewater treatment, with numerous successful field applications. This article comprehensively reviews the removal mechanisms and treatment performance in the use of FWs for the treatment of diverse industrial wastewaters. Our findings highlight that the performance of FWs relies on proper plant selection, design, aeration, season and temperature, plants harvesting and disposal, and maintenance. Well-designed FWs demonstrate remarkable effectiveness in removing organic matter (COD and BOD), suspended solids, nutrients, and heavy metals from industrial wastewater. This effectiveness is attributed to the intricate physical and metabolic interactions between plants and microbial communities within FWs. A significant portion of the reported applications of FWs revolve around the treatment of textile and oily wastewater. In particular, the application reports of FWs are mainly concentrated in temperate developing countries, where FWs can serve as a feasible and cost-effective industrial wastewater treatment technology, replacing high-cost traditional technologies. Furthermore, our analysis reveals that the treatment efficiency of FWs can be significantly enhanced through strategies like bacterial inoculation, aeration, and co-plantation of specific plant species. These techniques offer promising directions for further research. To advance the field, we recommend future research efforts focus on developing novel floating materials, optimizing the selection and combination of plants and microorganisms, exploring flexible disposal methods for harvested biomass, and designing multi-functional FW systems.

The evaluation of bacterial-augmented floating treatment wetlands for concomitant removal of phenol and chromium from contaminated water

Contamination of aquatic ecosystems with organic and inorganic contaminants is a global threat due to their hazardous effects on the environment and human health. Floating treatment wetland (FTW) technology is a cost-effective and sustainable alternative to existing treatment approaches. It consists of a buoyant mat in which wetland plants can grow and develop their roots in a suspended manner and can be implemented to treat stormwater, municipal wastewater, and industrial effluents. Here we explored the potential of bacterial-augmented FTWs for the concurrent remediation of phenol and hexavalent chromium (Cr6+) contaminated water and evaluated treated water toxicity using Triticum aestivum L. (wheat) as a test plant. The FTWs carrying Phragmites australis L. (common reed) were inoculated with a consortium of four bacterial strains (Burkholderia phytofirmans PsJN, Acinetobacter lwofii ACRH76, Pseudomonas aeruginosa PJRS20, Bacillus sp. PJRS25) and evaluated for their potential to simultaneously remove phenol and chromium (Cr) from contaminated water. Results revealed that the FTWs efficiently improved water quality by removing phenol (86%) and Cr (80%), with combined use of P. australis and bacterial consortium after 50 days. The phytotoxicity assay demonstrated that the germination of wheat seed (96%) was significantly higher where bacterial-augmented FTWs treated water was used compared to untreated water. This pilot-scale study highlights that the combined application of wetland plants and bacterial consortium in FTWs is a promising approach for concomitant abatement of phenol and Cr from contaminated water, especially for developing countries like Pakistan where the application of advanced and expensive technologies is limited.

Challenges and opportunities in the application of bioinspired engineered nanomaterials for the recovery of metal ions from mining industry wastewater

Heavy-metal-bearing wastewater is among the most formidable challenges the mining industry currently faces in maintaining its social license to operate. Amongst the technologies available for metal ion adsorption, bioinspired engineering nanomaterials have emerged as one which exhibits great promise. However, current processes used for the preparation of adsorbents (including nanoscale activated carbon and biochar) represent a source of adverse impacts on the environment. In contrast, the application of biogenic-nanoparticles, i.e., those derived from processes catalysed by microbiota, has received significant attention in the last few years. Coupled with this, the use of naturally occurring reagents is of major importance for the sustainability of this emerging industry. This paper analyses the life cycle assessment (LCA) of the synthesis of adsorbents derived from agricultural wastes. Moreover, rather than simply recovering the ecotoxic metals from wastewater, the potential to valorise dissolved metals into high-value metallic nanoparticle products is discussed. LCA analysis revealed that the adsorbent had some adverse impact on the environment. The agricultural wastes contributed 27.86% to global warming, 54.64% to ozone formation, 33.06% to fine particles, and 98.24% to marine eutrophication. Mining wastewater is an important, and largely currently unexploited, source of metal value. However, the often-low concentration of such metals dictates that their conversion into high-value products (such as engineered nanoparticles) is an important new research frontier. Within this the use of biosynthesis methods has emerged as having great potential due to a range of beneficial attributes, including low cost, high efficacy and/or environmental compatibility.

Recovery Strategies for Heavy Metal-Inhibited Biological Nitrogen Removal from Wastewater Treatment Plants: A Review

Biological nutrient removal is an integral part of a wastewater treatment plant. However, the microorganism responsible for nutrient removal is susceptible to inhibition by external toxicants such as heavy metals which have the potential to completely inhibit biological nutrient removal. The inhibition is a result of the interaction between heavy metals with the cell membrane and the deoxyribonucleic acid (DNA) of the cell. Several attempts, such as the addition of pretreatment steps, have been made to prevent heavy metals from entering the biological wastewater systems. However, the unexpected introduction of heavy metals into wastewater treatment plants result in the inhibition of the biological wastewater treatment systems. This necessitates the recovery of the biological process. The biological processes may be recovered naturally. However, the natural recovery takes time; additionally, the biological process may not be fully recovered under natural conditions. Several methods have been explored to catalyze the recovery process of the biological wastewater treatment process. Four methods have been discussed in this paper. These include the application of physical methods, chelating agents, external field energy, and biological accelerants. These methods are compared for their ability to catalase the process, as well as their environmental friendliness. The application of bio-accelerant was shown to be superior to other recovery strategies that were also reviewed in this paper. Furthermore, the application of external field energy has also been shown to accelerate the recovery process. Although EDTA has been gaining popularity as an alternative recovery strategy, chelating agents have been shown to harm the metal acquisition of bacteria, thereby affecting other metabolic processes that require heavy metals in small amounts. It was then concluded that understanding the mechanism of inhibition by specific heavy metals, and understanding the key microorganism in the inhibited process, is key to developing an effective recovery strategy.

Wastewater treatment using bamboos in constructed wetlands: experiences and future perspectives

Wastewater treatment using constructed wetlands (CWs) based on natural wetlands constitute a viable alternative with excellent cost and benefit, presenting themselves as efficient technologies in the secondary and tertiary treatment of wastewaters with low implementation, operation, and maintenance costs. The present study aims to evaluate the use of bamboo species, as an alternative to macrophytes, frequently used in CWs, through bibliometric analysis, besides to a review based on case studies. The maps generated by the VOSviewer software and by the analyses of the Web of Science and Scopus databases allowed for a review of typical concepts of CWs, in addition to revealing potential benefits of using bamboos in CWs, such as their hyperaccumulation capacity and bioproduct generation. Other promising aspects were identified, for example the use of bamboo charcoal as a substrate used in subsurface wetlands and the application of ornamental bamboo species for landscape improvements, among other observations. The efficiencies found in six case studies showed values between 89-99.7%, 47.6-99.7%, 58.3-99.9%, and 85.5-99.8% for BOD₅, COD, total nitrogen (TN), and total phosphorus (TP), respectively. Despite the promising results, the lack of studies using bamboos in CWs for the treatment of wastewaters limits an assertive statement about the use of this technology, requiring further research, focusing on the morphological functions of bamboos in this treatment with landscape integration and resources recovery.

Juncus sarophorus, a native Australian species, tolerates and accumulates PFOS, PFOA and PFHxS in a glasshouse experiment

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) have been identified as emerging contaminants of public health concern. With PFAS now detected globally in a wide range of environments, there is an urgent need for effective remedial treatment solutions at the field scale. Phytoremediation presents a potential remediation strategy for PFAS that would allow efficient and cost-effective remediation at large scales. This study examined the potential for the Australian native wetland plant Juncus sarophorus to tolerate, take up, and accumulate PFOS, PFOA and PFHxS. A 190-day glasshouse experiment was conducted, in which 0, 10 and 100 μg/L each of PFOS, PFOA and PFHxS were used to irrigate J. sarophorus in potted soil. The results suggest that J. sarophorus has a high tolerance to PFAS and is effective at accumulating and transferring PFHxS and PFOA from soils to above ground biomass. Together with its high growth rate, J. sarophorus appears to be, in principle, a suitable candidate for phytoextraction of short-chained PFAS compounds. It is, however, less efficient at uptake of PFOS, owing to the long chain-lengths of this compound and PFOSs' ability to sorb effectively to soils. The total accumulated PFAS mass at the end of the experiment was ~2000 μg/kg biota_{(wet weight)} and ~170 μg/kg biota_{(wet weight)} for soils irrigated with 100 μg/L and 10 μg/L for each PFAS compound, translating into overall PFAS removal rates of 11% and 9%.

Mangrove's rhizospheric engineering with bacterial inoculation improve degradation of diesel contamination

Mangroves (Avicennia marina) growing in intertidal areas are often exposed to diesel spills, adversely damaging the ecosystem. Herein, we showed for the first time that mangrove seedlings' associations with bacteria could reprogram host-growth, physiology, and ability to degrade diesel. We found four bacterial strains [Sphingomonas sp.-LK11, Rhodococcus corynebacterioides-NZ1, Bacillus subtilis-EP1 Bacillus safensis-SH10] exhibiting significant growth during diesel degradation (2% and 5%, v/v) and higher expression of alkane monooxygenase compared to control. This is in synergy with reduced long-chain n-alkanes (C24-C30) during microbe-diesel interactions in the bioreactor. Among individual strains, SH10 exhibited significantly higher potential to improve mangrove seedling's morphology, anatomy and growth during diesel treatment in rhizosphere compared to control. This was also evidenced by reduced activities and gene expression of antioxidant enzymes (catalases, peroxidases, ascorbic peroxidases, superoxide dismutases and polyphenol peroxidases) and lipid peroxidation during microbe-diesel interactions. Interestingly, we noticed significantly higher soil-enzyme activities (phosphatases and glucosidases) and essential metabolites in seedling's rhizosphere after bacteria and diesel treatments. Degradation of longer n-alkane chains in the rhizosphere also revealed a potential pathway that benefits mangroves by bacterial strains during diesel contaminations. Current results support microbes' application to rhizoengineer plant growth, responses, and phytoextraction abilities in environments contaminated with diesel spills. AVAILABILITY OF DATA AND MATERIALS: The datasets generated during the current study are available in the NCBI GenBank ((https://www.ncbi.nlm.nih.gov).

Enhanced degradation of hydrocarbons in constructed wetlands aided with nutrients, surfactant, and aeration

The use of constructed wetlands (CWs) is a promising approach for the remediation of hydrocarbon-polluted wastewater. The amendments of CWs with nutrients, surfactants, and aeration enhances the removal of pollutants from wastewater. The objective of the present study was to explore the effect of external stimulants, i.e., nutrients, surfactant, and aeration on hydrocarbons degradation potential of CWs. The CWs mesocosms were developed by the vegetation of Phragmites australis and amendments with nutrients (20 mg l^-1 N, 2.6 mg l^-1 P, and 16.4 mg l^-1 K), surfactant Tween 20 (0.2%, v/v), and aeration (7 mg l^-1) for the remediation of diesel-spiked water (2%, w/v). The comparative analysis showed that the addition of nutrients, surfactant, and aeration individually enhanced total petroleum hydrocarbons (TPHs) reduction, and maximum TPHs reduction (88.4%) was achieved after 60 days in the mesocosms amended with the combination of nutrients, surfactant, and aeration. Among different individual treatments, the aeration (alone) also played a pivotal role in TPHs reduction (61%). The least (12%) reduction in TPHs was achieved in the mesocosms supplied with surfactant only. This study revealed that the combined application of nutrients, surfactant, and aeration in CWs enhanced its hydrocarbons degradation performance.

Removal of per- and poly-fluoroalkyl substances (PFASs) by wetlands: Prospects on plants, microbes and the interplay

Per- and polyfluoroalkyl substances (PFASs) represent a large family of synthetic organofluorine aliphatic compounds. They have been extensively produced since 1940s due to enormous applications as a surface-active agent, and water and oil repellent characteristics. PFASs are made to be non-biodegradable, therefore, many of them have been found in the environment albeit strict regulations have been in place since 2002. PFASs are extremely toxic compounds that can impart harm in both fauna and flora. Recent investigations have shown that wetlands might be useful for their removal from the environment as a passive and nature-based solution. To this end, understanding the role of plants, microbes, and their combined plant-microbe interplay is crucial because it could help design a sophisticated passive treatment wetland system. This review focuses on how these components (plants, microbe, substrate) can influence PFASs removal in wetlands under natural and controlled conditions. The information on underlying removal mechanisms is mostly retrieved from laboratory-based studies; however, pilot- and field-scale data are also presented to provide insights on their real-time performance. Briefly, a traditional wetland system works on the principles of phytouptake, bioaccumulation, and sorption, which are mainly due to the fact that PFASs are synthetic compounds that have very low reactivity in the environment. Nevertheless, recent investigations have also shown that Feammox process in wetlands can mineralize the PFASs; thus, opens new opportunities for PFASs degradation in terms of effective plant-microbe interplay in the wetlands. The choice of plants and bacterial species is however crucial, and the system efficiency relies on species-specific, sediment-specific and pollutant-specific principles. More research is encouraged to identify genetic elements and molecular mechanisms that can help us harness effective plant-microbe interplay in wetlands for the successful removal of PFASs from the environment.

Recent developments and applications of floating treatment wetlands for treating different source waters: a review

Most water bodies around the world suffer from pollution to varying degrees. Floating treatment wetlands (FTWs) are a simple and efficient ecological treatment technology and have been widely studied and applied as a sustainable solution for different source waters. Based on the analysis of abundant literature in the last ten years, this paper systematically reviews the history and the latest development of FTWs. Meanwhile, the treatment performance and pollutant removal mechanisms of FTWs on the natural water, stormwater, domestic wastewater, industrial wastewater, and agricultural runoff are analyzed. In particular, very interesting information is provided, such as water depth, water surface coverage, the ratio of dissolved to total phosphorous (DRP/TP), the ratio of nitrogen to phosphorous (N/P), BOD/COD ratio, and its effects on the efficiency and removal mechanisms of FTWs. This information will provide useful references and guidance for optimizing the design of FTW and pollutant treatment efficiency of different source waters. This paper also provides an objective review of the limitations of FTWs. Subsequently, the enhancements of FTW technology which are recognized to be effective, including aeration, adding functional fillers or obligate degrading bacteria, and construction of hybrid FTWs, are summarized and recommendations are made for further research.

Efficacy of Lemna minor and Typha latifolia for the treatment of textile industry wastewater in a constructed wetland under citric acid amendment: A lab scale study

Lead (Pb), copper (Cu) and chromium (Cr) are one of the most harmful heavy metals (HMs), entering into the food chain through the irrigation of crops with an industrial effluent. The present study was performed to evaluate the toxic effects of textile effluents and performance of citric acid (CA) on phytoextraction potential of Lemna minor L. and Typha latifolia L. in an artificially designed wetland. Different doses of textile wastewater (0, 25, 50, 75, and 100%) and CA (10 mM) were applied alone and in combination. Plants were harvested and the data was collected regarding agronomic traits, photosynthetic pigments, antioxidant enzymes, reactive oxygen species (ROS), electrolytic leakage (EL) and HMs uptake and accumulation. The results depicted that the concentration and accumulation of Cu, Pb and Cr in different parts of T. latifolia plant was increased with and without CA addition. The maximum concentration of Pb, Cu and Cr increased in leaves by 279, 240 & 171%, in stem by 192, 172 & 154%, and in roots by 224, 183 & 168%, respectively. Similarly, the accumulation of Pb, Cu and Cr increased in leaves by 91, 71 & 36%, in stem by 57, 46 & 36% and in roots by 76, 53 & 45%, respectively in plants treated with 100% textile effluent as compared to the 25% textile effluent treated plants under CA amendment. In L. minor, the concentration of Pb, Cu & Cr increased by 542, 411 and 397% while accumulation increased by 101, 59 & 55% respectively in overall plant biomass.

Bacterial bioaugmentation enhances hydrocarbon degradation, plant colonization and gene expression in diesel-contaminated soil

Environmental contamination by hydrocarbons is a major problem, and hydrocarbon accumulation in soil poses hazardous threat to ecosystems. Phytoremediation, which involves plants, is an encouraging technique for the removal of hydrocarbons from polluted soil and water. The purpose of this investigation was to examine whether bacterial inoculation enhanced the phytoremediation of hydrocarbons in diesel-contaminated soil vegetated with maize (Zea mays L.). The two cultivars of maize, MMRI Yellow and Pearl White, were planted in diesel-polluted soil (0, 1.5, 2.5, and 3.5 g diesel kg^-1 soil), and inoculated with the consortium of three alkane-degrading bacterial strains, Arthrobacter oxydans ITRH49, Pseudomonas sp. ITRI73 and Pseudomonas sp. MixRI75. Bacterial inoculation enhanced plant growth and hydrocarbon degradation. Between two cultivars, MMRI Yellow showed better growth and hydrocarbon degradation in the presence and absence of bacterial inoculation. Maximum hydrocarbon degradation (80%) was observed in the soil having minimum concentration of diesel (1.5 g kg^-1 soil), and vegetated with bacterial inoculated MMRI Yellow maize cultivar. Furthermore, more bacterial colonization, and abundance and expression of the alkane hydroxylase gene (alkB) were observed in the root interior than in the rhizosphere and shoot interior of the plants. The bacteria-mediated phytoremediation of soil contaminated with hydrocarbons suggested that the collective use of plants and bacteria was the most beneficial approach for the reclamation of diesel-contaminated soil in comparison with vegetation alone.

How to enhance the purification performance of traditional floating treatment wetlands (FTWs) at low temperatures: Strengthening strategies

Pollution of freshwaters poses a major threat to water quality and human health and thus, nutrients have been targeted for mitigation. One such control measure is floating treatment wetlands (FTWs), which are designed to employ vigorous macrophytes above the water surface and extensive plant root system below the water surface to increase plant uptake of nutrients. The efficacy of FTWs in purifying different water systems has been widely studied and reviewed, but most studies have been performed in warm periods when FTW macrophytes are actively growing. In low-temperature conditions, the metabolic processes of macrophytes and microbial activity are usually weakened or reduced by the winter months and are not actively assimilating pollutants. These circumstances hamper the purification ability of FTWs to perform as designed. Furthermore, decayed macrophytes could release pollutants into the water column. Hence, this paper aimed to systematically summarize strategies for use of enhanced FTWs in eutrophic water improvement at low temperature and identify future directions to be addressed in intensifying FTW performance in low-temperature conditions. Low-temperature FTW show variable nutrient removal efficiencies ranging from 22% to 98%. Current amendments to enhance FTW purification performance, ranging from direct strategies for internal components to indirect enhancement of external operation environments encourage the FTW efficacy to some extent. However, the sustainability and sufficiency of water purification efficiency remain a great challenge. Keeping in mind the need for optimizing the FTW components and dealing with high organic and inorganic chemicals, future research should be carried out at the large field-scale and focus on macrophyte- benthos- microorganism synergistic enhancement, breeding of cold-tolerant macrophytes, and combination of FTWs with many strategies, as well as rational design and operational approaches under cold conditions.

Assessing the impact of vegetation coverage ratio in a floating water treatment bed of Pistia stratiotes

Floating bed (FB) is one of the low cost and efficient system to treat polluted water bodies in rural as well as urban area. It requires less space compared to other macrophyte based treatment system. Vegetation coverage is an effective factor as atmospheric oxygen diffusion to water body depends upon this. When a water body is fully covered by vegetation, it prevents the diffusion of atmospheric oxygen, which is a major source of dissolved oxygen (DO). An optimum vegetation coverage is necessary to obtain maximum treatment efficiency and to verify this a laboratory scale experiment was performed with various vegetation coverage ratio (VCR) of 0, 0.25, 0.5, 0.75, 1. Organics and nutrient removal were measured corresponding to initial floating bed VCR. COD removal for VCR 1.0, 0.75, 0.5, 0.25 and 0 were 86.4%, 93.6%, 96.2%, 85.4% and 60.8%, respectively. The roots of macrophyte (Pistia stratiotes) supports growth of microorganism, which perform biodegradation of organics as well as uptake nutrients. Maximum NH4+-N and PO43−-P removal were observed at VCR of 0.75 and 1.0, respectively. In the tanks with VCR of 0.25, 0.5 and 0.75, the final DO was more than 4 mg/L, which is the requisite DO value for survival of aquatic organism.