Optimization of myco-synthesized silver nanoparticles by response surface methodology employing Box-Behnken design

Isolation, characterization and response surface method optimization of cellulose from hybridized agricultural wastes

This study explores the utilization of eight readily available agricultural waste varieties in Nigeria-sugarcane bagasse, corn husk, corn cob, wheat husk, melina, acacia, mahogany, and ironwood sawdust-as potential sources of cellulose. Gravimetric analysis was employed to assess the cellulose content of these wastes, following which two selected wastes were combined based on their cellulose content and abundance to serve as the raw material for the extraction process. Response Surface Methodology, including Box-Behnken design, was applied to enhance control over variables, establish an optimal starting point, and determine the most favorable reaction conditions. The cellulose extracted under various conditions was comprehensively examined for content, structure, extent of crystallinity, and morphological properties. Characterization techniques such as X-ray Diffraction, Scanning Electron Microscopy, and Fourier Transform Infrared Spectroscopy were employed for detailed analysis. Compositional analysis revealed sugarcane bagasse and corn cob to possess the highest cellulose content, at 41 ± 0.41% and 40 ± 0.32% respectively, with FTIR analysis confirming relatively low C=C bond intensity in these samples. RSM optimization indicated a potential 46% isolated yield from a hybrid composition of sugarcane bagasse and corn cob at NaOH concentration of 2%, temperature of 45 °C, and 10 ml of 38% H2O2. However, FTIR analyses revealed the persistence of non-cellulosic materials in this sample. Further analysis demonstrated that cellulose isolated at NaOH concentration of 10%, temperature of 70 °C, and 20 ml of 38% H2O2 was of high purity, with a yield of 42%. Numerical optimization within this extraction condition range predicted a yield of 45.6% at NaOH concentration of 5%, temperature of 45 °C, and 20 ml of 38% H2O2. Model validation confirmed an actual yield of 43.9% at this condition, aligning closely with the predicted value. These findings underscore the significant potential of combinning and utilizing agricultural wastes as a valuable source of cellulose, paving the way for sustainable and resource-efficient practices in various industrial applications.

Optimization of graphene polypyrrole for enhanced adsorption of moxifloxacin antibiotic: an experimental design approach and isotherm investigation

The presence of antibiotics in water systems had raised a concern about their potential harm to the aquatic environment and human health as well as the possible development of antibiotic resistance. Herein, this study investigates the power of adsorption using graphene-polypyrrole (GRP-PPY) nanoparticles as a promising approach for the removal of Moxifloxacin HCl (MXF) as a model antibiotic drug. GRP-PPY nanoparticles synthesis was performed with a simple and profitable method, leading to the formation of high surface area particles with excellent adsorption properties. Characterization was assessed with various techniques, including Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET). Box-Behnken experimental design was developed to optimize the adsorption process. Critical parameters such as initial antibiotic concentration, nanoparticle concentration, and pH were investigated. The Freundlich isotherm model provided a good fit to the experimental data, indicating multilayer adsorption of MXF onto the GRP-PPY-NP. As a result, a high adsorption capacity of MXF (92%) was obtained in an optimum condition of preparing 30 μg/mL of the drug to be adsorbed by 1 mg/mL of GRP-PPY-NP in pH 9 within 1 h in a room temperature. Moreover, the regeneration and reusability of GRP-PPY-NP were investigated. They could be effectively regenerated for 3 cycles using appropriate desorption agents without significant loss in adsorption capacity. Overall, this study highlights the power of GRP-PPY-NP as a highly efficient adsorbent for the removal of MXF from wastewater as it is the first time to use this NP for a pharmaceutical product which shows the study's novelty, and the findings provide valuable insights into the development of sustainable and effective wastewater treatment technologies for combating antibiotic contamination in aquatic environments.

Development of a Composite Hydrogel Containing Statistically Optimized PDGF-Loaded Polymeric Nanospheres for Skin Regeneration: In Vitro Evaluation and Stem Cell Differentiation Studies

Platelet-derived growth factor-BB (PDGF-BB) is a polypeptide growth factor generated by platelet granules faced to cytokines. It plays a role in forming and remodeling various tissue types, including epithelial tissue, through interaction with cell-surface receptors on most mesenchymal origin cells. However, it breaks down quickly in biological fluids, emphasizing the importance of preserving them from biodegradation. To address this challenge, we formulated and evaluated PDGF-encapsulated nanospheres (PD@PCEC) using polycaprolactone-polyethylene glycol-polycaprolactone. PD@PCECs were fabricated through the triple emulsion methodology and optimized by using the Box-Behnken design. The encapsulation efficiency (EE) of nanoencapsulated PDGF-BB was investigated concerning four variables: stirring rate (X1), stirring duration (X2), poly(vinyl alcohol) concentration (X3), and PDGF-BB concentration (X4). The selected optimized nanospheres were integrated into a gelatin-collagen scaffold (PD@PCEC@GC) and assessed for morphology, biocompatibility, in vitro release, and differentiation-inducing activity in human adipose-derived stem cells (hADSCs). The optimized PD@PCEC nanospheres exhibited a particle size of 177.9 ± 91 nm, a zeta potential of 5.2 mV, and an EE of 87.7 ± 0.44%. The release profile demonstrated approximately 85% of loaded PDGF-BB released during the first 360 h, with a sustained release over the entire 504 h period, maintaining bioactivity of 87.3%. The study also included an evaluation of the physicochemical properties of the scaffolds and an assessment of hADSC adhesion to the scaffold's surface. Additionally, hADSCs cultivated within the scaffold effectively differentiated into keratinocyte-like cells (KLCs) over 21 days, evidenced by morphological changes and upregulation of keratinocyte-specific genes, including cytokeratin 18, cytokeratin 19, and involucrin, at both transcriptional and protein levels.

Nano spinel NiAl2O4: structure, optical and photocatalytic performance evaluation and optimization

Four kinds of spinel NiAl2O4were synthesized by the polyacrylamide gel method using Al2(SO4)3·18H2O and Al(NO3)3·9H2O as aluminum salts and anhydrous NiSO4and NiSO4·6H2O as nickel salts. The effects of different aluminum salts and nickel salts on the structure, optical and photocatalytic activity of spinel NiAl2O4were confirmed by various characterizations. There is no NiO impurity in the spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt, while NiAl2O4, NiO and C-O functional group coexist in the target product with Al(NO3)3·9H2O as aluminum salt, and C-O functional group and NiO inhibits the photocatalytic activity of the system. Based on photocatalytic experiment, response surface methodology and free radical verification experiment, the influence of experimental parameters including synthesis pathway, initial drug concentration, initialpHand catalyst content on the photocatalytic activity of spinel NiAl2O4and the main active species involved in the reaction were investigated. The degradation percentage of spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt and NiSO4·6H2O as nickel salt was 86.3% at the initial concentration of 50 mg l-1,pH= 5.33 and catalyst content of 1 g l-1. The mechanism investigation confirmed that the C-O functional group plays the dual role of impurity level and electron transfer in the degradation of tetracycline hydrochloride by spinel NiAl2O4.

Optimisation of soil washing method for removal of petroleum hydrocarbons from contaminated soil around oil storage tanks using response surface methodology

Total petroleum hydrocarbons (TPHs), which are often found in soil, water, sediments, and air. These compounds are a type of pollutant that can have a serious negative impact on living things and human health. Soil washing method is a remediation technique used to remove contaminants from the soil. This process involves the use of water or other solvents to extract contaminants from the soil, followed by separation and disposal of the contaminated solution. This research engineered the effectiveness of soil washing method to remove TPHs from a genuine, sullied soil sample. After analyzing the physical and chemical properties of the soil, the Box-Benken Design (BBD) technique was used to optimize the variables that influence the process's effectiveness. A quadratic model was suggested based on the BBD design, correlation coefficients, and other factors. The minimum, maximum and mean removal of TPHs during the stages of the study were 63.5, 94.5 and 76.7%, respectively. The correlation between the variables was strong, as shown by the analysis of variance (ANOVA), F-value (1064.5) and P-value (0.0001), and the proposed model was highly significant. The most effective soil washing method (SWM) was obtained with pH 7.8, liquid to solid ratio 50:1, reaction time 52 min, surfactant concentration 7.9 mg kg-1, and three washings. A removal rate of 98.8% was accomplished for TPHs from the soil in this context. The kinetic results indicate that the kinetic of TPHs removal follows the first-order kinetics (R2 = 0.96). There was not a major difference in the process's efficiency based on temperature. The removal efficiency heightened from 0 to 150 rpm and then remained steady. Introducing air flow increased the rate of removal, and the combination of ultrasonic waves with the reaction environment increased the process efficiency and decreased the time for the process and the amount of times it needed to be washed. An analysis of the washed soil both physically and chemically revealed a substantial decrease in the concentration of other elements.

Gamma rays-assisted bacterial synthesis of bimetallic silver-selenium nanoparticles: powerful antimicrobial, antibiofilm, antioxidant, and photocatalytic activities

BACKGROUND

Bimetallic nanoparticles (BNPs) has drawn a lot of attention especially during the last couple of decades. A bimetallic nanoparticle stands for a combination of two different metals that exhibit several new and improved physicochemical properties. Therefore, the green synthesis and design of bimetallic nanoparticles is a field worth exploring.

METHODS

In this study, we present a green synthesis of silver nanoparticles (Ag NPs), selenium (Se) NPs, and bimetallic Ag-Se NPs using Gamma irradiation and utilizing a bacterial filtrate of Bacillus paramycoides. Different Techniques such as UV-Vis., XRD, DLS, SEM, EDX, and HR-TEM, were employed for identifying the synthesized NPs. The antimicrobial and antibiofilm activities of both the Ag/Se monometallic and bimetallic Ag-Se NPs were evaluated against some standard microbial strains including, Aspergillus brasiliensis ATCC16404, Candida albicans ATCC10231, Alternaria alternate EUM108, Fusarium oxysporum EUM37, Escherichia coli ATCC11229, Bacillus cereus ATCC15442, Klebsiella pneumoniae ATCC13883, Bacillus subtilis ATCC15442, and Pseudomonas aeruginosa ATCC6538 as a model tested pathogenic microbes. The individual free radical scavenging potentials of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs were determined using the DPPH radical scavenging assay. The degradation of methylene blue (MB) dye in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was used to assess their photocatalytic behavior.

RESULTS

According to the UV-Vis. spectrophotometer, the dose of 20.0 kGy that results in Ag NPs with the highest O.D. = 3.19 at 390 nm is the most effective dose. In a similar vein, the optimal dose for the synthesis of Se NPs was 15.0 kGy dose with O.D. = 1.74 at 460 nm. With a high O.D. of 2.79 at 395 nm, the most potent dose for the formation of bimetallic Ag-Se NPs is 15.0 kGy. The recorded MIC-values for Ag-Se NPs were 62.5 µg mL- 1, and the data clearly demonstrated that C. albicans was the organism that was most susceptible to the three types of NPs. The MIC value was 125 µg mL- 1 for both Ag NPs and Se NPs. In antibiofilm assay, 5 µg mL- 1 Ag-Se NPs inhibited C. albicans with a percentage of 90.88%, E. coli with a percentage of 90.70%, and S. aureus with a percentage of 90.62%. The synthesized NPs can be arranged as follows in decreasing order of antioxidant capacity as an antioxidant result: Ag-Se NPs > Se NPs > Ag NPs. The MB dye degradation in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was confirmed by the decrease in the measured absorbance (at 664 nm) after 20 min of exposure to sunlight.

CONCLUSION

Our study provides insight towards the synthesis of bimetallic NPs through green methodologies, to develop synergistic combinatorial antimicrobials with possible applications in the treatment of infectious diseases caused by clinically and industrial relevant drug-resistant strains.

Drug-Delivery Silver Nanoparticles: A New Perspective for Phenindione as an Anticoagulant

Anticoagulants prevent the blood from developing the coagulation process, which is the primary cause of death in thromboembolic illnesses. Phenindione (PID) is a well-known anticoagulant that is rarely employed because it totally prevents coagulation, which can be a life-threatening complication. The goal of the current study is to synthesize drug-loaded Ag NPs to slow down the coagulation process. Methods: A rapid synthesis and stabilization of silver nanoparticles as drug-delivery systems for phenindione (PID) were applied for the first time. Results: Several methods are used to determine the size of the resulting Ag NPs. Additionally, the drug-release capabilities of Ag NPs were established. Density functional theory (DFT) calculations were performed for the first time to indicate the nature of the interaction between PID and nanostructures. DFT findings supported that galactose-loaded nanostructure could be a proper delivery system for phenindione. The drug-loaded Ag NPs were characterized in vitro for their antimicrobial, cytotoxic, and anticoagulant activities, and ex vivo for spasmolytic activity. The obtained data confirmed the drug-release experiments. Drug-loaded Ag NPs showed that prothrombin time (PT, sec) and activated partial thromboplastin time (APTT, sec) are approximately 1.5 times longer than the normal values, while PID itself stopped coagulation at all. This can make the PID-loaded Ag NPs better therapeutic anticoagulants. PID was compared to PID-loaded Ag NPs in antimicrobial, spasmolytic activity, and cytotoxicity. All the experiments confirmed the drug-release results.

Unveiling anticancer, antimicrobial, and antioxidant activities of novel synthesized bimetallic boron oxide-zinc oxide nanoparticles

Bimetallic nanoparticles have received much attention recently due to their multifunctional applications, and synergistic potential at low concentrations. In the current study, bimetallic boron oxide-zinc oxide nanoparticles (B2O3-ZnO NPs) were synthesized by an eco-friendly, and cost-effective method through the utilization of gum arabic in the presence of gamma irradiation. Characterization of the synthesized bimetallic B2O3-ZnO NPs revealed the successful synthesis of bimetallic NPs on the nano-scale, and good distribution, in addition to formation of a stable colloidal nano-solution. Furthermore, the bimetallic B2O3-ZnO NPs were assessed for anticancer, antimicrobial and antioxidant activities. The evaluation of the cytotoxicity of bimetallic B2O3-ZnO NPs on Vero and Wi38 normal cell lines illustrated that bimetallic B2O3-ZnO NPs are safe in use where IC50 was 384.5 and 569.2 μg ml-1, respectively. The bimetallic B2O3-ZnO NPs had anticancer activity against Caco 2 where IC50 was 80.1 μg ml-1. Furthermore, B2O3-ZnO NPs exhibited promising antibacterial activity against E. coli, P. aeruginosa, B. subtilis and S. aureus, where MICs were 125, 62.5, 125 and 62.5 μg ml-1 respectively. Likewise, B2O3-ZnO NPs had potential antifungal activity against C. albicans as unicellular fungi (MIC was 62.5 μg ml-1). Moreover, B2O3-ZnO NPs displayed antioxidant activity (IC50 was 102.6 μg ml-1). In conclusion, novel bimetallic B2O3-ZnO NPs were successfully synthesized using gum arabic under gamma radiation, where they displayed anticancer, antimicrobial and antioxidant activities.

Study on modified SA-H3BO3 immobilization microorganism method for wastewater treatment in seawater recirculating aquaculture system

The sodium alginate-H₃BO₃ (SA-H₃BO₃) is traditionally used as bioremediation method for wastewater treatment in recirculating aquaculture system. Even though this method has many advantages (e.g., high cell loading) for immobilization, the remove of ammonium is not very effective. In this study, a modified method was built by adding polyvinyl alcohol and activated carbon into SA solution, and then crosslinked with saturated H₃BO₃-CaCl₂ solution for creating new beads. Moreover, response surface methodology was utilized for optimizing the immobilization based on Box-Behnken design. The removal rate of ammonium in 96 h was taken as the primary performance criterion to characterize the biological activity of immobilized microorganisms (i.e., Chloyella pyrenoidosa, Spirulina platensis, Nitrifying bacteria, and Photosynthetic bacteria). Based on the results, the optimal parameter of immobilization as follows: the concentration of SA was 1.46%, the concentration of polyvinyl alcohol was 0.23%, the concentration of activated carbon was 0.11%, the crosslinking time was 29.33 h, and the pH was 6.6.

Drug-Loaded Silver Nanoparticles-A Tool for Delivery of a Mebeverine Precursor in Inflammatory Bowel Diseases Treatment

Chronic, multifactorial illnesses of the gastrointestinal tract include inflammatory bowel diseases. One of the greatest methods for regulated medicine administration in a particular region of inflammation is the nanoparticle system. Silver nanoparticles (Ag NPs) have been utilized as drug delivery systems in the pharmaceutical industry. The goal of the current study is to synthesize drug-loaded Ag NPs using a previously described 3-methyl-1-phenylbutan-2-amine, as a mebeverine precursor (MP). Methods: A green, galactose-assisted method for the rapid synthesis and stabilization of Ag NPs as a drug-delivery system is presented. Galactose was used as a reducing and capping agent forming a thin layer encasing the nanoparticles. Results: The structure, size distribution, zeta potential, surface charge, and the role of the capping agent of drug-loaded Ag NPs were discussed. The drug release of the MP-loaded Ag NPs was also investigated. The Ag NPs indicated a very good drug release between 80 and 85%. Based on the preliminary results, Ag NPs might be a promising medication delivery system for MP and a useful treatment option for inflammatory bowel disease. Therefore, future research into the potential medical applications of the produced Ag NPs is necessary.

Timolol-loaded ethosomes for ophthalmic delivery: Reduction of high intraocular pressure in vivo

The beta-adrenoceptor blocker timolol maleate (TML) is a commonly used pharmaceutical agent for the management of glaucoma. Conventional eye drops have limitations due to biological or pharmaceutical factors. Therefore, TML-loaded ethosomes have been designed to mitigate these restrictions and give a viable solution for reducing elevated intraocular pressure (IOP). The ethosomes were prepared using the thin film hydration method. Integrating the Box-Behnken experimental strategy, the optimal formulation was identified. The physicochemical characterization studies were performed on the optimal formulation. Then, in vitro release and ex vivo permeation studies were conducted. The irritation assessment was also carried out with Hen's Egg Test-Chorioallantoic Membrane model (HET-CAM), and in vivo evaluation of the IOP lowering effect was also performed on rats. The physicochemical characterization studies demonstrated that the components of the formulation were compatible with each other. The particle size, zeta potential, and encapsulation efficiency (EE%) were found as 88.23 ± 1.25 nm, -28.7 ± 2.03 mV, and 89.73 ± 0.42 %, respectively. The in vitro drug release mechanism was found as Korsmeyer-Peppas kinetics (R²=0.9923). The HET-CAM findings verified the formulation's eligibility for biological applications. The IOP measurements revealed no statistical difference (p>0.05) between the once-a-day application of the optimal formulation and the three-times-a-day application of the conventional eye drop. A similar pharmacological response was observed at lowered application frequencies. Therefore, it was concluded that the novel TML-loaded ethosomes could be a safe and efficient alternative for glaucoma treatment.

Sunlight-driven antibacterial activity of a novel zinc oxide quantum dot and its optimization using Box-Behnken design-A medicament for communicable disease protective wearables

The current study focuses on microwave-assisted zinc oxide quantum dots synthesis (ZnO-QDs) from zinc oxide bionanocomposite (ZnO-BC) preparation. The novelty lies in the preparation of ZnO-QDs, since the natural elements present in ZnO-BC itself acted as a surface penetration enhancer without using any chemical agent. Under ultraviolet (UV) light ZnO-QDs emitted a blue glow, confirming the fluorescence property. Using Box-Behnken design, the experimental factors of ZnO-QDs were optimized, yielding a positive response of 350 nm absorbance and these results also matched with the UV-visible spectroscopy characterization studies of ZnO-QDs. Using Escherichia coli, the antibacterial activity of ZnO-BC in comparison to ZnO-QDs was determined using the well diffusion method and an inhibition zone ranging from 11 to 23 mm and in the broth assay the OD values were reduced by almost seven and 10 times for ZnO-BC and ZnO-QDs, respectively, when compared to the control (untreated). The antibacterial activity demonstrated that our newly prepared BC and its QDs have superior activity when compared to the standard antibiotics such as ampicillin. This type of nanomaterial can be used as a new bioactive natural material with light-assisted activity for antibacterial coatings in the manufacture of personal protective equipment.

Ag(I) Biosorption and Green Synthesis of Silver/Silver Chloride Nanoparticles by Rhodotorula mucilaginosa 1S1

The efficiency of Rhodotorula mucilaginosa 1S1 as an Ag(I) biosorbent and at the same time its ability to biosynthesize recoverable silver nanoparticles is evaluated. Kinetic, equilibrium and thermodynamic tests are carried out for 19 °C, 27 °C and 37 °C, from which the process is adjusted to a pseudo second-order kinetics and to the Freundlich model, while optimal operational conditions are determined at 27 °C. The thermodynamic study shows positive values for enthalpy (ΔH: 133.23 kJ/mol) and entropy (ΔS: 0.4976 kJ/(mol K)), while the Gibbs free energy (ΔG) value is 12.136 kJ/mol. For a metal concentration of 459 mg/L, a maximum biosorption capacity (q_m) of 137.2 mg/g at 19 °C is obtained, while for 100 mg/L concentration a q_m value of 60.44 mg/g is obtained at the same temperature. The mechanisms involved in the biosorption process are studied by infrared spectroscopy, X-ray diffraction and scanning and transmission electron microscopy, while the nanoparticle synthesis is evaluated by ultraviolet-visible spectrophotometry (UV-vis) and transmission electron microscopy. The results indicate that the biomass is a good biosorbent and also has the ability to synthesize silver nanoparticles (Ag/AgCl) with sizes between 12 nm and 20 nm.

Optimization of Bacillus subtilis NRC1 growth conditions using response surface methodology for sustainable biosynthesis of gold nanoparticles

Gold nanoparticles (AuNPs) have different unique properties and a wide range of applications in different fields. Thereby, there is a growing urgency for the production of AuNPs using a safe and an economic method. In this study, optimization of fermentation conditions by Bacillus subtilis NRC1 for extracellular AuNPs synthesis using response surface methodology was achieved. The data obtained from Plackett-Burman design followed by Box-Behnken design indicated the accuracy and reliability of the model and it could be used to navigate the design space with a reasonable accuracy. Numerical optimization of Bacillus subtilis NRC1 active extracellular filtrate production, showed the optimum conditions of 0.74% (w/v) casein hydrolysate, 3.99% (w/v) dextrin, 47 × 10⁶ CFU/ml inoculum size at pH 7.76 and 25 [Formula: see text]C to give the maximum AuNPs biosynthesis. The model was highly valid and the obtained data had a confidence factor of 98.48%. Statistical optimization resulted in a 2.6-fold increase in AuNPs production compared with that of the non-optimized medium.

Fabrication of Copper of Harmonic Structure: Mechanical Property-Based Optimization of the Milling Parameters and Fracture Mechanism

A severe plastic deformation process for the achievement of favorable mechanical properties for metallic powder is mechanical milling. However, to obtain the highest productivity while maintaining reasonable manufacturing costs, the process parameters must be optimized to achieve the best mechanical properties. This study involved the use of response surface methodology to optimize the mechanical milling process parameters of harmonic-structure pure Cu. Certain critical parameters that affect the properties and fracture mechanisms of harmonic-structure pure Cu were investigated and are discussed in detail. The Box-Behnken design was used to design the experiments to determine the correlation between the process parameters and mechanical properties. The results show that the parameters (rotation speed, mechanical milling time, and powder-to-ball ratio) affect the microstructure characteristics and influence the mechanical performance, including the fracture mechanisms of harmonic-structure pure Cu specimens. The best combination values of the ultimate tensile strength (UTS) and elongation were found to be 272 MPa and 46.85%, respectively. This combination of properties can be achieved by applying an optimum set of process parameters: a rotation speed of 200 rpm; mechanical milling time of 17.78 h; and powder-to-ball ratio of 0.065. The superior UTS and elongation of the harmonic-structure pure Cu were found to be related to the delay of void and crack initiation in the core and shell interface regions, which in turn were controlled by the degree of strength variation between these regions.

Investigation and Prediction of ECMM characteristics of Hardened Die Steel with Nanoparticle Added Electrolytes Using Hybrid Deep Neural Network

In our work, the process efficiency of the ECMM should be improved by using different combinations of nano-particles and added electrolytes. The superior aim of this work is to improve and predict the ECMM machining characteristics of die hardened steel, namely material removal rate (MRR), Tool wear rate (TWR) and Surface Roughness (Ra). The machining conditions are optimized using Response Surface Methodology (RSM) based on Box Behnken Design. The better Nano electrolyte is optimized using Deer Hunting Optimization (DHO) based on the machined outcomes, and the performances are predicted using a hybrid Deep Neural Network (DNN) based DHO. The hybrid DNN-DHO based predicted outcome of MRR is 0.361 mg/min, TWR is 0.272 mg/min and Ra is 2.511 μm. The validation results show that our proposed DNN-DHO model performed well and obtained above 0.99 regression for both training and validation of DNN-DHO, where the root mean square error ranges between 0.018 and 0.024.

Cefotaxime incorporated bimetallic silver-selenium nanoparticles: promising antimicrobial synergism, antibiofilm activity, and bacterial membrane leakage reaction mechanism

In this research, we reported for the first time the simple incorporation of antibiotic cefotaxime (CFM) with the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs by gamma rays, as a promising cost-effective, and eco-friendly method. The synthesized nanocomposites were characterized by UV-Vis. spectroscopy, XRD, EDX, HR-TEM, SEM/mapping, and EDX studies. The antimicrobial synergistic potential was investigated after CFM drug incorporation. Antibiofilm activity, growth curve assay, and effect of UV illumination were examined against some pathogenic microbes. The antibacterial reaction mechanism was evaluated by protein leakage assay and SEM imaging. HRTEM imaging confirmed the spherical shape and an average diameter of 10.95, 20.54, and 12.69 nm for Ag NPs, Se NPs, and Ag-Se NPs, respectively. Ag NPs-CFM, Se NPs-CFM, and Ag-Se NPs-CFM possessed antimicrobial activity against Staphylococcus aureus (40, 42, and 43 mm ZOI, respectively), Escherichia coli (33, 35, and 34 mm ZOI, respectively) and Candida albicans (25, 22, and 23 mm ZOI, respectively). CFM-incorporated Ag-Se NPs were able to inhibit biofilm formation of S. aureus (96.09%), E. coli (98.32%), and C. albicans (95.93%). Based on the promising results, the synthesized nanocomposites showed superior antimicrobial potential at low concentrations and continued-phase durability; they may find use in pharmaceutical, and biomedical applications.

Photocatalytic and biological activities of green synthesized SnO2 nanoparticles using Chlorella vulgaris

AIMS

To produce tin oxide (SnO₂ ) nanoparticles (NP) with microalga for use in azo dye polluted wastewater treatment and to optimize the conditions to synthesize as small NPs as possible.

METHODS AND RESULTS

The green microalga Chlorella vulgaris mediated NPs were synthesized after an optimization process utilizing the statistical response surface methodology (RSM). The optimized synthesis conditions were 200 W microwave power, 0.5 mM SnCl₂ concentration, and 200 °C calcination temperature. Methyl orange (MO) was studied for its photocatalytic degradation with UV. Antibacterial activity against four pathogenic bacteria was studied using the well diffusion method. Cytotoxicity was measured using the MMT assay with lung cancer cell line A549, and antioxidant activity using DPPH radical scavenging. Following the optimization of their production, the produced crystalline SnO₂ NPs were on average 32.2 nm (by XRD) with a hydrodynamic size of 52.5 nm (by LDS). Photocatalytic degradation of MO under UV was nearly complete (94% removal) after 90 min and the particles could be reused for 5 cycles retaining 80% activity. The particles had antibacterial activity towards all five tested bacterial pathogens with the minimum inhibitory concentrations ranging from 22 to 36 μg/ml. The minimum bactericidal NP concentration varied between 83 and 136 μg/ml. Antioxidant activity was concentration dependent. A cytotoxicity was determined towards A549 cells with an LD50 of 188 μg/ml after 24 h of incubation, a concentration that is much higher than the active concentration for dye removal ranging from 22 to 36 μg/ml.

CONCLUSIONS

After optimization, SnO2 nanoparticles produced with C. vulgaris displayed high photocatalytic activity at concentrations below their antibacterial and cytotoxic activity.

SIGNIFICANCE AND IMPACT OF THE STUDY

The SnO₂ nanoparticles produced with the help of microalgae are suitable for the removal of MO dye from wastewater. Further applications of this green technology can be expected.

Synthesis of silver nanoparticles with high efficiency and stability by culture supernatant of Bacillus ROM6 isolated from Zarshouran gold mine and evaluating its antibacterial effects

Background

The use of bacteria to synthesize nanoparticles as an environment-friendly method has recently been considered by researchers. Bacteria residing in different mines have shown high potential in the synthesis of metal nanoparticles due to their compatibility with the environment. The aim of this study was to evaluate the ability of Zarshouran gold mine bacteria to synthesize silver nanoparticles and their antibacterial activity.

Methods

After isolation of mine bacteria and several screening steps, silver ion tolerant bacteria that were able to synthesize extracellular silver nanoparticles were isolated and the most suitable isolate was selected and sequenced. The characteristics, stability, and production efficiency of silver nanoparticles were evaluated using UV–vis spectrophotometry, DLS, TEM, FTIR, and X-ray diffraction analysis. Finally, the antibacterial effect of silver nanoparticles against pathogenic bacteria was investigated.

Results

Among the eight silver-tolerant bacteria, isolate No. 6 had high antibacterial activity and high potential in the synthesis and stabilization of silver nanoparticles. Therefore, this isolate was selected for the next experiments. The results of 16S rDNA sequencing showed that this isolate is related to Bacillus pumilus. We registered in the NCBI Bank called ROM6 with access number MW440543. The DLS and TEM analysis showed that silver nanoparticles produced by this isolate were most spherical with a size of less than 25 nm and were stable for at least 180 days. The efficiency at concentrations less than 0.9 g/l silver nitrate was over 90% and the minimum inhibition concentration of nanoparticles was determined against S. aureus, E. coli, P. aeruginosa, and A. baumannii ranging from 1.4 to 5.6 µg/ml.

Conclusion

We found that the bacteria residing in the gold mine have a high capacity for the synthesis of spherical and high stable silver nanoparticles with a strong antibacterial effect.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02490-5.

Statistical optimization of silver nanoparticle synthesis by green tea extract and its efficacy on colorimetric detection of mercury from industrial waste water

For the optimization of silver nanoparticle production, a central composite design was used with three parameters: AgNO₃ concentration, green tea extract concentration, and temperature at three different levels. The size of the synthesized silver nanoparticle, its UV absorbance, zeta potential, and polydispersity index were set as the response parameters. Silver nanoparticles obtained in the optimization process were characterized and its efficacy on colorimetric detection of mercury was evaluated. The response variables were significant for the factors analyzed, and each variable had a significant model (P < 0.05). The ideal conditions were: 1 mM AgNO₃, 0.5% green tea extract, and 80 °C temperature. To analyze the produced AgNPs under certain ideal conditions, Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used. The UV-visible spectra of AgNPs revealed an absorption maxima at 424 nm. The XRD pattern reveals a significant diffraction peak at 38.25°, 44.26°, 64.43°, and 77.49°, which corresponds to the (111), (200), (220), and (311) planes of polycrystalline face-centered cubic (fcc) silver, respectively. The TEM and SEM analyses confirmed that the particles were spherical, and dynamic light scattering study determined the average diameter of AgNPs to be 77.4 nm. The AgNPs have a zeta potential of -62.6 mV, as determined by the zeta sizer analysis. The AgNPs detects mercury at a micromolar concentration. Furthermore, the environmentally friendly generated AgNPs were used to detect mercury in a colorimetric method that was effectively employed for analytical detection of Hg²⁺ ions in an aqueous environment for the purpose of practical application.

The preference of the most appropriate radical-based regeneration process for spent activated carbon by the PROMETHEE approach

In this study, regeneration of spent granular activated carbon (GAC) with reactive dye by hydroxyl and sulfate radical-based advanced oxidation processes (microwave (MW) +persulfate (PS)), (Fe(II)+ PS), and (O₃ + H₂O₂) were evaluated. The adsorption of the dye to the GAC surface was characterized by chemisorption and Langmuir isotherm. Regeneration processes have been optimized by the response surface methodology to determine the operating conditions that will provide the highest adsorptive capacity. The optimum conditions of (MW + PS), (Fe (II) + PS), and (O₃ + H₂O₂) processes were process PS anion of 45.52 g/L, pH of 11.4, MW power of 126 W, and duration of 14.56 min; Fe (II) of 3.58 g/L, PS anion of 73.5 g/L, duration of 59.8 min, and pH of 10.9; and H₂O₂ of 2.8 mole/L, flow rate of 8.14 mg ozone/L, duration of 32.8 min, and pH of 5.3, respectively. For (MW + PS), (Fe (II) + PS), and (O₃ + H₂O₂) processes, the adsorptive capacity under optimum conditions was found as 4.36, 8.89, and 8.12 mg dye/g GAC, respectively. For (Fe (II) + PS) and (O₃ + H₂O₂) processes, these values are approximately equal to the adsorptive capacity of raw GAC (8.01 mg dye/g GAC). The predicted values of the adsorption capacities by the obtained models were in good agreement with the actual experimental results. Preference Ranking Organization Method for Enrichment Evaluation approach was used in the preference of the appropriate regeneration process. The adsorptive capacity of regenerated GAC, operating cost of the regeneration process, change in the adsorptive capacity during the regeneration cycle, and carbon mass loss criteria were taken into account. The order of preference of regeneration processes was determined as (Fe (II) + PS)> (MW + PS)> (O₃ + H₂O₂) considering all criteria.

Sorption and recovery of phenolic compounds from aqueous phase of sewage sludge hydrothermal liquefaction using bio-char

Bio-char, a by-product of thermochemical conversion processes, has a great potential in phenolic compounds sorption from the waste aqueous phase produced from the hydrothermal liquefaction (HTL) process while being a low-cost sorbent. This study investigated the effect of temperature, pH, bio-char concentration, and mixing speed on two types of bio-char sorption of phenolic compounds using Taguchi's design of experiment and response surface method. Isothermal kinetics and thermodynamic properties were also evaluated to explain the sorption mechanism. The experimental results were well described by the pseudo-second-order kinetic model for both types of bio-char. The Langmuir isotherm model was found to be more suitable at high sorption temperatures, while the Freundlich isotherm model was better at low temperatures. Finally, the alkaline desorption and regeneration experiments were examined, and the eluents with phenolic compounds were characterized using a liquid chromatography-mass spectrometer.

The Brassica Napus Extract (BNE)-Loaded PLGA Nanoparticles as an Early Necroptosis and Late Apoptosis Inducer in Human MCF-7 Breast Cancer Cells

Loading of the Brassica napus extract (BNE) on PLGA nanoparticle (BNE-PNP) and study its necroptotic activity in human MCF7-breast cancer cells. Double emulsion solvent evaporation methods were used for synthesis of BNE-PNP and DLS, SEM, and surface Zeta-potential analysis were applied for defining the physicochemical properties of BNE-PNP. The cytotoxic impact of BNE-PNP nanoparticles was analyzed by MTT assay and expression of apoptotic (P53 and Cas-3) and necrotic (TNF-α) gene markers were measured by qPCR to evaluate the BNE-PNP-induced cell death type. The stable (-36.07 mV) BNE-PNP were synthesized at 71.07 nm dimension. They significantly decrease the count of metabolically active MCF7 cells (IC₅₀: 170.94 µg/ml after 48 h). The BNE-PNP induced an early programmed necrotic (necroptosis) and late apoptotic death on the MCF7 cancer cells by up-regulating all the P53/TNF-α and Cas-3 gene expression, respectively. The BNE-PNP dose-dependently induced an early cell-selective necroptotic death. Since the necroptotic death is known as a biocompatible cellular death induction, the BNE-PNP have the potential to be used as a safe efficient anticancer compound.

Biosorption mechanisms of Ag(I) and the synthesis of nanoparticles by the biomass from Botryosphaeria rhodina MAMB-05

Two biomass types of Botryosphaeria rhodina MAMB-05 (VMSM and M3) were evaluated to determine their effectiveness in removing Ag(I) ions from synthetic solutions. Both biomass types obtained good results in the biosorption process with maximum biosorption capacities (q_m) for the Langmuir model of 34.67 and 39.23 mg Ag(I)/g dry biomass for M3 and VMSM, respectively. The biomass was characterized by X-ray microfluorescence and Fourier-transform-infrared spectroscopy (FT-IR). After the biosorption process, the mechanisms involved in biosorption were studied by FT-IR, X-ray diffraction (XRD), Field Emission Scanning Microscopy/Energy Dispersive X-ray Analysis (FESEM/EDX) and Ultraviolet-Visible Spectrophotometry. The results demonstrated the participation of various mechanisms in the retention of silver on biomass (bioadsorption, complexation, ion exchange, covalent bonding) that resulted in the formation of silver chloride nanoparticles (AgCl-NPs) and silver nanoparticles (AgNPs). The sizes of AgCl-NPs (chlorargyrite) according to the Debye-Scherrer equation were 19.29 nm (VMSM biomass) and 24.9 nm for the M3 type. For AgNPs the crystal size was between 1.5 and 0.8 nm for VMSM and M3 respectively. Furthermore, it was found that an undetermined fraction of the silver nanoparticles after biosorption remained in solution, which could be advantageous for their recovery.

Synthesis, Characterization, and Optimization of Green Silver Nanoparticles Using Neopestalotiopsis clavispora and Evaluation of Its Antibacterial, Antibiofilm, and Genotoxic Effects

Silver nanoparticles (AgNPs) have been used in a variety of biomedical applications in the last two decades, including antimicrobial, anti-inflammatory, and anticancer treatments. The present study highlights the extracellular synthesis of silver nanoparticles AgNPs using Neopestalotiopsis clavispora MH244410.1 and its antibacterial, antibiofilm, and genotoxic properties. Locally isolated N. clavispora MH244410.1 was identified by Internal transcribed spacer (ITS) sequences of nuclear ribosomal DNA. Optimization of synthesized AgNPs was performed by using various parameters (pH (2, 4, 7, 9 and 12), temperature (25, 35 and 45 °C), and substrate concentration (0.05, 0.1, 0.15, 0.2 and 0.25 mM)). After 72 hours of incubation in dark conditions, the best condition for the biosynthesis of AgNPs was determined as 0.25 mM metal concentration at pH 12 and 35 °C. Fungal synthesized AgNPs were characterized via spectroscopic and microscopic techniques such as Fouirer Transform Infrared Spectrophotometer (FTIR), UV-Visible Spectroscopy, and Transmission Electron Microscopy (TEM). The average size of the AgNPs was determined less than 60 nm using the TEM and Zetasizer measurement system (measured in purity water suspension). The characteristic peak of AgNPs was observed at ~414 nm from UV-Vis results. Antibacterial and genotoxic activity of synthesized AgNPs (0.1, 1, and 10 ppm) were also determined by using the agar well diffusion method and in vivo Somatic Mutation and Recombination Test (SMART) in Drosophila melanogaster. AgNPs exhibited potential antimicrobial activity against all the tested bacteria (Bacillus subtilis, Staphylococcus aureus, and Pseudomonas aeruginosa) except Escherichia coli in a dose-dependent manner. AgNPs did not induce genotoxicity in the Drosophila SMART assay. 79.33, 65.47, and 41.95% inhibition of biofilms formed by P. aeruginosa were observed at 10, 1, and 0.1 ppm of AgNPs, respectively. The overall results indicate that N. clavispora MH244410.1 is a good candidate for novel applications in biomedical research.

Design of experiments (DoE) to develop and to optimize nanoparticles as drug delivery systems

Nanotechnology has been widely applied to develop drug delivery systems to improve therapeutic performance. The effectiveness of these systems is intrinsically related to their physicochemical properties, so their biological responses are highly susceptible to factors such as the type and quantity of each material that is employed in their synthesis and to the method that is used to produce them. In this context, quality-oriented manufacturing of nanoparticles has been an important strategy to understand and to optimize the factors involved in their production. For this purpose, Design of Experiment (DoE) tools have been applied to obtain enough knowledge about the process and hence achieve high-quality products. This review aims to set up the bases to implement DoE as a strategy to improve the manufacture of nanocarriers and to discuss the main factors involved in the production of the most common nanocarriers employed in the pharmaceutical field.

Rapid green synthesis of non-cytotoxic silver nanoparticles using aqueous extracts of 'Golden Delicious' apple pulp and cumin seeds with antibacterial and antioxidant activity

Abstract

A simple, facile and rapid microwave irradiated system was applied to synthesize silver nanoparticles using 'Golden Delicious' apple pulp (Malus domestica) and cumin (Cuminum cyminum) seed extracts. The phytosynthesized AgNPs were characterized by Ultraviolet–Visible Spectroscopy (UV–vis), Fourier transform infrared (FTIR), X-ray Diffraction (XRD) Transmission Electron Microscopy (TEM) and Zeta sizer analysis. In the study, the presence of face-centered cubic crystalline structured metallic silver in AgNPs from apple and cumin extracts and the monodisperse nature of AgNPs with the size distribution range of 5.46–20 nm and 1.84–20.57 nm were confirmed, respectively. This study established an efficient green synthesis approach that created so far, the smallest silver nanoparticles by using these two extracts. According to the results obtained, AgNPs synthesized using both extracts were non-toxic against L929 mouse fibroblast cells, while they were effective against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria with a greater effect on S. aureus. Moreover, AgNPs synthesized through cumin extract exhibited a higher ABTS scavenging ability (96.43 ± 0.78% at 160 μg/mL) in comparison to apple pulp extract mediated AgNPs, while both AgNPs showed lower activity for DPPH (27.84 ± 0.56% and 13.12 ± 0.32% from cumin seed and apple pulp extracts, respectively). In summary, our results suggest the green non-cytotoxic AgNPs synthesized in this study could be a promising template for further biological and clinical applications.

Graphical abstract

Mycogenic Synthesis of Extracellular Zinc Oxide Nanoparticles from Xylaria acuta and Its Nanoantibiotic Potential

Purpose

The study aimed to find an effective method for fungal-mediated synthesis of zinc oxide nanoparticles using endophytic fungal extracts and to evaluate the efficiency of synthesized ZnO NPs as antimicrobial and anticancerous agents.

Methods

Zinc oxide nanoparticles (ZnO NPs) were produced from zinc nitrate hexahydrate with fungal filtrate by the combustion method. The spectroscopy and microscopy techniques, such as ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), and transmission electron microscopy (TEM) with selected area electron diffraction (SAED), were used to characterize the obtained product. Antibacterial activity on Gram-positive (Staphylococcus aureus and Bacillus cereus) and Gram-negative (Pseudomonas aeruginosa and Escherichia coli) samples was tested by broth microplate dilution technique. ZnO NPs antifungal activity was determined against plant pathogenic and regular contaminating fungi using the food-poison method. The anticancerous assay of the synthesized ZnO NPs was also investigated by cell uptake, MTT assay, and apoptosis assay.

Results

The fungal synthesized ZnO NPs were pure, mainly hexagonal in shape and size range of 34–55 nm. The biosynthesized ZnO NPs could proficiently inhibit both Gram-positive and Gram-negative bacteria. ZnO NPs synthesized from fungal extract exhibited antifungal activity in a dose-dependent manner with a high percentage of mycelial inhibition. The cell uptake analysis of ZnO NPs suggests that a significant amount of ZnO NPs (1 μg/mL) was internalized without disturbing cancer cells’ morphology. As a result, the synthesized ZnO NPs showed significant anticancer activity against cancer cells at 1 μg/mL concentration.

Conclusion

This fungus-mediated synthesis of ZnO NPs is a simple, eco-friendly, and non-toxic method. Our results show that the synthesized ZnO NPs are an excellent novel antimicrobial and anticancer agent. Further studies are required to understand the mechanism of the antimicrobial, anticancerous action of ZnO NPs and their possible genotoxicity.

Green synthesis of silver nanoparticles using canthaxanthin from Dietzia maris AURCCBT01 and their cytotoxic properties against human keratinocyte cell line

AIM

Nano-biotechnologically synthesizing silver nanoparticles via canthaxanthin pigment extracted from Dietzia maris AURCCBT01 and assessing their cytotoxic therapeutic potential against human keratinocyte cell line (HaCaT) were the key objectives of this study.

METHODS AND RESULTS

The pigment extracted from D. maris AURCCBT01 was identified as canthaxanthin using UV-VIS spectroscopy, FTIR, NMR (¹ H NMR and ¹³ C NMR) and MS. Canthaxanthin, treated with silver nitrate solution, produced canthaxanthin-mediated silver nanoparticles and they were characterized by UV-VIS spectroscopy, FTIR, XRD, FESEM-EDX and TEM-SAED techniques. UV-VIS spectroscopy pointed out an absorption band at 420 nm, relating to the surface plasmon resonance of silver nanoparticles. FTIR findings suggested that the diverse functional groups of canthaxanthin bio-molecules played a significant task in capping the silver nanoparticles. XRD analysis exhibited 40·20 nm for the crystal size of nanoparticles. FESEM and TEM exhibited that the biosynthesized silver nanoparticles were spherical in shape with crystalline nature and the particle size was 40-50 nm. Moreover, the cytotoxicity assessment of the synthesized nanoparticles in HaCaT revealed significant cytotoxicity in the cultured cells with an IC₅₀ value of 43 µg ml^-1 .

CONCLUSION

Stable silver nanoparticles synthesized using canthaxanthin from D. maris AURCCBT01 were found effective for application in wound healing activity.

SIGNIFICANCE AND IMPACT OF THE STUDY

Biosynthesized silver nanoparticles via canthaxanthin bacterial pigment exhibited their cytotoxicity effect in HaCaT and testified their eventual therapeutic potential in the wound healing activity with no side effects in a cost effective and eco-friendly process.

Gum Arabic polymer-stabilized and Gamma rays-assisted synthesis of bimetallic silver-gold nanoparticles: Powerful antimicrobial and antibiofilm activities against pathogenic microbes isolated from diabetic foot patients

In this research, irradiation by gamma rays was employed as an eco-friendly route for the construction of bimetallic silver-gold nanoparticles (Ag-Au NPs), while Gum Arabic polymer was used as a capping agent. Ag-Au NPs were characterized through UV-Vis., XRD, EDX, HR-TEM, FTIR, SEM/mapping and EDX analysis. Antibiofilm and antimicrobial activities were examined against some bacteria and Candida sp. isolates from diabetic foot patients. Our results revealed that the synthesis of Ag-Au NPs depended on the concentrations of tetra-chloroauric acid and silver nitrate. HR-TEM analysis confirmed the spherical nature and an average diameter of 18.58 nm. FTIR results assured many functional groups in Gum Arabic which assisted in increasing the susceptibility of incorporation with Ag-Au NPs. Our results showed that, Ag-Au NPs exhibited the highest antimicrobial performance against B. subtilis (14.30 mm ZOI) followed by E. coli (12.50 mm ZOI) and C. tropicalis (11.90 mm ZOI). In addition, Ag-Au NPs were able to inhibit the biofilm formation by 99.64%, 94.15%, and 90.79% against B. subtilis, E. coli, and C. tropicalis, respectively. Consequently, based on the promising properties, they showed superior antimicrobial potential at low concentration and continued-phase durability, they can be extensively-used in many pharmaceutical and biomedical applications.

Emerging Antineoplastic Biogenic Gold Nanomaterials for Breast Cancer Therapeutics: A Systematic Review

Breast cancer remains as a concerning global health issue, being the second leading cause of cancer deaths among women in the United States (US) in 2019. Therefore, there is an urgent and substantial need to explore novel strategies to combat breast cancer. A potential solution may come from the use of cancer nanotechnology, an innovative field of study which investigates the potential of nanomaterials for cancer diagnosis, therapy, and theranostic applications. Consequently, the theranostic functionality of cancer nanotechnology has been gaining much attention between scientists during the past few years and is growing exponentially. The use of biosynthesized gold nanoparticles (AuNPs) has been explored as an efficient mechanism for the treatment of breast cancer. The present study supposed a global systematic review to evaluate the effectiveness of biogenic AuNPs for the treatment of breast cancer and their anticancer molecular mechanisms through in vitro studies. Online electronic databases, including Cochrane, PubMed, Scopus, Web of Science, Science Direct, ProQuest, and Embase, were searched for the articles published up to July 16, 2019. Our findings revealed that plant-mediated synthesis was the most common approach for the generation of AuNPs. Most of the studies reported spherical or nearly spherical-shaped AuNPs with a mean diameter less than 100 nm in size. A significantly larger cytotoxicity was observed when the biogenic AuNPs were tested towards breast cancer cells compared to healthy cells. Moreover, biogenic AuNPs demonstrated significant synergistic activity in combination with other anticancer drugs through in vitro studies. Although we provided strong and comprehensive preliminary in vitro data, further in vivo investigations are required to show the reliability and efficacy of these NPs in animal models.

Effect of NaOH concentration on antibacterial activities of Cu nanoparticles and the antibacterial mechanism

A series of Cu nanoparticles (NPs) have been prepared by a facile hydrothermal method at 180 °C using different concentrations of NaOH solutions and characterized by XRD, SEM, TEM and FT-IR spectra. Their antibacterial activities were assessed by means of Gram-positive S. aureus and Gram-negative E. coli bacteria, where various dosages (3, 5, 7, 10 mg) of the antibacterial agents were applied, and compared with that of the commercial CuSO₄ salt. The antibacterial mechanism was explored based on series of control experiments. The results show that the NaOH concentration affects the crystallinity, crystal size and surface hydroxyl content of the Cu NPs, which significantly influence the antibacterial activities. Compared to the commercial CuSO₄ salt, the four Cu samples prepared using no <4 mol L^-1 of NaOH display excellent antibacterial activities with low concentrations of copper leachates, which is great beneficial to the practical applications. The experimental results support that the highly reactive and soluble copper species in the antibacterial system of the Cu NPs is a Cu (II)-peptide complex, but not free Cu²⁺ ions.

Zinc oxide‑selenium heterojunction composite: Synthesis, characterization and photo-induced antibacterial activity under visible light irradiation

The designing of new antibacterial agents with high and long-lasting activities are urgently needed in order to cope with the fast-emerging bacterial resistance. Zinc oxide nanoparticles (ZnO) have shown a significant promise as broad-spectrum antibacterial agents, and are efficient material in compromising bacterial membrane stability that leads to an increased cell permeability to nano-products. However, further engineering is required to improve their biological activities and to minimize their toxicity to healthy cells. In an attempt to resolve this issue, two semiconductor materials, ZnO and selenium (Se), were fabricated into a unique structural composite by a newly developed facile green method, and the designed composite was applied as an antibacterial nanomedicine. The developed methodology involves the initial preparation of ZnO, followed by its fabrication with Se at different temperatures (70 °C to 95 °C). Our experimental data showed that well defined interpenetrated crystalline Se network on ZnO (ZnO-Se) can be obtained at 80 °C for 180 min. The as-prepared ZnO-Se showed promising results in inhibiting the challenged bacterial strains under light irradiation (visible light) as compared to free ZnO. The enhanced biocidal property of ZnO-Se could be ascribed to its improved light-harvesting ability for sustainable induction of reactive oxygen species (ROS) and an active contact killing mechanism. Thus, ZnO-Se composite with a novel architecture could be a promising material in the treatment of bacterial infections by a mutual antibacterial synergy from the incorporated elements. Interestingly, the ZnO-Se has the ability to scavenge the overproduction of hydroxyl radicals, thus protecting the healthy cells from oxidative damage.

Biological synthesis of silver nanoparticles using Rheum ribes and evaluation of their anticarcinogenic and antimicrobial potential: A novel approach in phytonanotechnology

This paper reports the anticarcinogenic and antimicrobial properties of silver nanoparticles (Ag NPs) obtained by green synthesis using the extract of Rheum ribes (R. ribes), a medicinal plant. For the synthesis of Ag NPs, the ethanolic extracts of R. ribes were used as a reducing as well as the stabilizing agent. For the characterization of Ag NPs, advanced analytical methods such as transmission electron microscopy (TEM), X-Ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and UV-vis spectrophotometry were performed. The synthesized Ag NPs obtained from R. ribes were evaluated as a cytotoxic agent against MDA-MB-231 breast carcinoma cell line. The IC₅₀ values of the nanoparticles were ranged from 165 to 99 μg/mL against MDA-MB 231 cell line for 24 h and 48 h, respectively. The results show that the use of Ag NPs at low concentrations show the toxic effect in the cancer cells. In addition, the results of experiments on gram-positive (Staphylococcus aureus (S. aureus), Methicillin-resistant Staphylococcus aureus (MRSA) and Bacillus subtilis (B. subtilis)) and gram-negative (Escherichia coli (E. coli)) bacteria showed that the Ag NPs had high antimicrobial activity. The results suggest that Ag NPs can be developed as potential anticancer and antibacterial agents.