miR397-LACs mediated cadmium stress tolerance in Arabidopsis thaliana

Cadmium (Cd) is a non-essential heavy metal, assimilated in plant tissue with other nutrients, disturbing the ions' homeostasis in plants. The plant develops different mechanisms to tolerate the hazardous environmental effects of Cd. Recently studies found different miRNAs that are involved in Cd stress. In the current study, miR397 mutant lines were constructed to explore the molecular mechanisms of miR397 underlying Cd tolerance. Compared with the genetically modified line of overexpressed miR397 (artificial miR397, amiR397), the lines of downregulated miR397 (Short Tandem Target Mimic miR397, STTM miR397) showed more substantial Cd tolerance with higher chlorophyll a & b, carotenoid and lignin content. ICP-OES revealed higher cell wall Cd and low total Cd levels in STTM miR397 than in the wild-type and amiR397 plants.Further, the STTM plants produced fewer reactive oxygen species (ROS) and lower activity of antioxidants enzymes (e.g., catalase [CAT], malondialdehyde [MDA]) compared with amiR397 and wild-type plants after stress, indicating that silencing the expression of miR397 can reduce oxidative damage. In addition, the different family transporters' gene expression was much higher in the amiR397 plants than in the wild type and STTM miRNA397. Our results suggest that miR397 plays a role in Cd tolerance in Arabidopsis thaliana. Overexpression of miR397 could decrease Cd tolerance in plants by regulating the expression of LAC 2/4/17, changing the lignin content, which may play an important role in inducing different stress-tolerant mechanisms and protecting the cell from a hazardous condition. This study provides a basis to elucidate the functions of miR397 and the Cd stress tolerance mechanism in Arabidopsis thaliana.

The role of leaf litter as a protective barrier for copper-containing pesticides in orchard soils

This study assessed the capacity of leaf litters to adsorb copper ions applied as a copper-based pesticide. Leaf litters of two fruit tree species with different lignin/N ratios were examined to determine their protective role against the incorporation of Cu into soil. A leaf litter Cu-adsorption capacity assay and a degradation assay were performed using table grape (lignin/N = 2.35) and kiwi (lignin/N = 10.85) leaf litters. Table grape leaf litter had a significantly (p = 0.001) higher Cu-adsorption capacity (15,800 mg kg^-1) than kiwi leaf litter (14,283 mg kg^-1). Following leaf litter degradation, significant differences (p = 0.011) were observed in the release of Cu from Cu-enriched leaf litter into soil, showing that kiwi litter has a greater protective effect against the incorporation of Cu into soil, regardless of the amount of Cu applied. This protective role is reflected in a significantly higher (p = 0.015) Cu concentration in table grape soil (41.71 ± 2.14 mg kg^-1) than in kiwi soil (35.87 ± 0.69 mg kg^-1). Therefore, leaf litter with higher lignin/N ratio has greater protective role against copper incorporation into soil.

The current status, challenges and prospects of using biomass energy in Ethiopia

Despite enormous challenges in accessing sustainable energy supplies and advanced energy technologies, Ethiopia has one of the world's fastest growing economies. The development of renewable energy technology and the building of a green legacy in the country are being prioritized. The total installed capacity for electricity generation in Ethiopia is 4324.3 MW as on October, 2018. Renewable energy accounts for 96.5% of total generation; however, despite the county's enormous biomass energy potential, only 0.58% of power is generated using biomass. Ethiopia has surplus woody biomass, crop residue and animal dung resources which comprise about 141.8 million metric tons of biomass availability per year. At present the exploited potential is about 71.9 million metric tons per year. This review paper provides an in-depth assessment of Ethiopia's biomass energy availability, potential, challenges, and prospects. The findings show that, despite Ethiopia's vast biomass resource potential, the current use of modern energy from biomass is still limited. As a result, this study supports the use of biomass-based alternative energy sources without having a negative impact on the socioeconomic system or jeopardizing food security or the environment. This finding also shows the challenges, opportunities and possible solutions to tackle the problem to expand alternative energy sources. The most effective techniques for producing and utilizing alternate energy sources were also explored. Moreover, some perspectives are given based on the challenges of using efficient energy production and sustainable uses of biomass energy in Ethiopia as it could be also implemented in other developing countries. We believe that the information in this review will shed light on the current and future prospects of biomass energy deployment in Ethiopia.

Investigation of trace metal binding properties of lignin by diffusive gradients in thin films

The binding behavior of lignin for Pb, Cu, Co, Mn, Cd and Ni was studied using the diffusive gradients in thin films technique (DGT). Samplers with different structures of diffusive gel were used in the well-stirred systems containing known concentrations of metals along with (a) 10, 20 and 40 μM lignin and; (b) 0.64 and 6.47 μM Suwannee river fulvic acid+40 μM lignin at an ionic strength of 0.01 M (NaNO(3)) and pH=7. Diffusion coefficients of lignin complexes in acrylamide gels were estimated and found to be less than 5% of the equivalent coefficients for the uncomplexed metal ions. These values were used to calculate concentrations of labile metals from DGT measurements in solutions, where lignin could discriminate metals in the order of Pb(+2)>Cu(+2)>Cd(+2)>Ni(+2)>Co(+2)>Mn(+2). Stability constants (LogK) were calculated using Visual MINTEQ II and WHAM V software. The K values were compared with the stability constants from titration of Pb and Cd with 10 μM lignin aqueous samples and with those of humic substances in natural waters. The constants obtained from measurement of complexing capacities might bias the real corresponding values unless two line regression analyses on titration data are considered. The DGT study of fractionation of metal species at varying ratios indicated that the proportion of organic complexes decreased with increasing ratios and gradually more metals were exchanged with inorganic phases. Speciation of Pb and Cd is affected by the concentrations of FA, Cd is dominantly bound with FA while Pb is evenly partitioned between the ligands. The comprehensive knowledge of metal-lignin complexes sheds some light on in situ operational speciation information that can be achieved by DGT.

Sorption of 2,4-dinitroanisole (DNAN) on lignin

The present study describes the use of two commercially available lignins, namely, alkali and organosolv lignin, for the removal of 2,4-dinitroanisole (DNAN), a chemical widely used by the military and the dye industry, from water. Sorption of DNAN on both lignins reached equilibrium within 10 hr and followed pseudo second-order kinetics with sorption being faster with alkali than with organosolv lignin, i.e. k2 10.3 and 0.3 g/(mg x hr), respectively. In a separate study we investigated sorption of DNAN between 10 and 40 degrees C and found that the removal of DNAN by organosolv lignin increased from 0.8 to 7.5 mg/g but reduced slightly from 8.5 to 7.6 mg/g in the case of alkali lignin. Sorption isotherms for either alkali or organosolv lignin best fitted Freundlich equation with enthalpy of formation, deltaH0 equaled to 14 or 80 kJ/mol. To help understand DNAN sorption mechanisms we characterized the two lignins by elemental analysis, BET nitrogen adsorption-desorption and 31P NMR. Variations in elemental compositions between the two lignins indicated that alkali lignin should have more sites (O- and S-containing functionalities) for H-bonding. The BET surface area and calculated total pore volume of alkali lignin were almost 10 times greater than that of organosolv lignin suggesting that alkali lignin should provide more sites for sorption. 31P NMR showed that organosolv lignin contains more phenolic -OH groups than alkali lignin, i.e., 70% and 45%, respectively. The variations in the type of OH groups between the two lignins might have affected the strength of H-bonding between DNAN and the type of lignin used.

Copper and cadmium sorption onto kraft and organosolv lignins

The relative metal sorption ability of kraft and organosolv lignins was examined as a function of solution chemistry (pH, ionic strength (I), sorbate-to-sorbent ratio) and reaction time. The surface charge characteristics and functional group composition of these lignins, especially kraft lignin, are favorable for metal sorption. Sorption of Cu and Cd increased with increasing pH and decreasing I. Description of sorption isotherms required the more complex Sips equation, as compared to the simpler Langmuir and Freundlich formulations, indicative of the presence of binding sites with varying affinities on these lignin biosorbents. Sorption capacity varied in the following order: softwood organosolv lignin<hardwood organosolv lignin<hardwood kraft lignin<softwood kraft lignin with sorption maximum of 21.5, 40, 66.7, and 80.6 micromol/g, respectively, for Cu, and 8.2, 18.3, 25.2, and 28.7 micromol/g for Cd. Both Cu and Cd sorption kinetics were rapid with equilibrium levels attained within 80 min and faster uptake was noticed for Cu. Strong competitive effects exhibited by H(+) and Na(+) in limiting Cu and Cd sorption are suggestive of the occurrence of weak ion-exchange type interactions involving the carboxylic and phenolic functional groups. Additional pretreatment and surface modifications of these biosorbents might be required to increase metal sorption capacity and enhance their use in waster/wastewater treatment.

Potentiality of lignin from the Kraft pulping process for removal of trace nickel from wastewater: effect of demineralisation

An industrial raw Kraft lignin was investigated to ascertain its potential use for removal of trace Ni(II) ion from wastewater by using dilute solutions (0.34-1.7 mM) as models. The effect of demineralisation on its metal sorption ability was examined by employing acid pre-treated samples. Under fixed pre-established equilibrium conditions, the raw lignin exhibited a lower effectiveness than the demineralised one, with the latter attaining an almost complete removal of Ni(II) ions. For both lignins, sorption kinetics was properly described by a pseudo-second order rate model. Equilibrium isotherms were also determined and adequately represented by conventional two-parameter models. The higher nickel sorption capacity for the demineralised lignin compared to the raw sample was consistent with enhancements in the negative magnitude of zeta potential, sodium sorption capacity, and content of phenolic hydroxyl groups occasioned by the acid pre-treatment. Accordingly, demineralisation appears as a readily convenient strategy to improve the behaviour of industrial Kraft lignin for potential use as a biosorbent of trace nickel from polluted water.

Shell cracking strength in almond (Prunus dulcis [Mill.] D.A. Webb.) and its implication in uses as a value-added product

Researchers are currently developing new value-added uses for almond shells, an abundant agricultural by-product. Almond varieties are distinguished by processors as being either hard or soft shelled, but these two broad classes of almond also exhibit varietal diversity in shell morphology and physical characters. By defining more precisely the physical and chemical characteristics of almond shells from different varieties, researchers will better understand which specific shell types are best suited for specific industrial processes. Eight diverse almond accessions were evaluated in two consecutive harvest seasons for nut and kernel weight, kernel percentage and shell cracking strength. Shell bulk density was evaluated in a separate year. Harvest year by almond accession interactions were highly significant (p0.01) for each of the analyzed variables. Significant (p0.01) correlations were noted for average nut weight with kernel weight, kernel percentage and shell cracking strength. A significant (p0.01) negative correlation for shell cracking strength with kernel percentage was noted. In some cases shell cracking strength was independent of the kernel percentage which suggests that either variety compositional differences or shell morphology affect the shell cracking strength. The varietal characterization of almond shell materials will assist in determining the best value-added uses for this abundant agricultural by-product.

Lignin--from natural adsorbent to activated carbon: a review

The present review compiles the work done over the last few decades on the use of lignin and lignin-based chars and activated carbons as adsorbents for the removal of substances from water and focuses on the utilisation of lignin as adsorbent, its conversion to chars and activated carbons and the use of these materials as adsorbents. Moreover, the review also examines the textural and surface chemical properties of lignin-based activated carbons. The work so far carried out indicates that lignin is relatively non-reactive and probably the component of lignocellulosic precursors primarily responsible for the microporosity of activated carbons. Under appropriate conditions of activation it is possible to obtain materials with surface areas and pore volumes approaching 2000 m(2)g(-1) and 1cm(3)g(-1), respectively, and these materials have capacities for the aqueous phase adsorption of metallic pollutants that are comparable to those of commercial activated carbons. Relatively little work has so far been published and there is considerable scope for more detailed studies on the preparation, characterisation and adsorption applications of lignin-based activated carbons.