Bone repair of critical-sized defects in Wistar rats treated with autogenic, allogenic or xenogenic bone grafts alone or in combination with natural latex fraction F1

Bone Regeneration of Critical-Size Calvarial Defects in Rats Using Highly Pressed Nano-Apatite/Collagen Composites

Osteo-conductive bone substitute materials are required in dentistry. In this study, highly pressed nano-hydroxyapatite/collagen (P-nHAP/COL) composites were formed by a hydraulic press. Critical-size bone defects (Φ = 6 mm) were made in the cranial bones of 10-week-old Wistar rats, in which P-nHAP/COL and pressed collagen (P-COL) specimens were implanted. Defect-only samples (DEF) were also prepared. After the rats had been nourished for 3 days, 4 weeks, or 8 weeks, ossification of the cranial defects of the rats was evaluated by micro-computed tomography (micro-CT) (n = 6 each). Animals were sacrificed at 8 weeks, followed by histological examination. On micro-CT, the opacity of the defect significantly increased with time after P-nHAP/COL implantation (between 3 days and 8 weeks, p < 0.05) due to active bone regeneration. In contrast, with P-COL and DEF, the opacity increased only slightly with time after implantation, indicating sluggish bone regeneration. Histological inspections of the defect zone implanted with P-nHAP/COL indicated the adherence of multinucleated giant cells (osteoclasts) to the implant with phagocytosis and fragmentation of P-nHAP/COL, whereas active bone formation occurred nearby. Fluorescent double staining indicated dynamic bone-formation activities. P-nHAP/COL is strongly osteo-conductive and could serve as a useful novel bone substitute material for future dental implant treatments.

Natural latex serum: characterization and biocompatibility assessment using Galleria mellonella as an alternative in vivo model

Natural latex serum (NLS) is one of the natural rubber latex fractions from Hevea brasiliensis tree, which is formed by centrifuged serum and is composed of proteins, acids, nucleotides, salts and carbohydrates. The proteins present in NLS have demonstrated several interesting biological properties, including angiogenic, healing, osteogenic, anti-inflammatory, antimicrobial, in addition to inducing neovascularization, bone formation and osseointegration. Thus, we proposed to characterize NLS by physicochemical techniques and to investigate the biocompatibility by toxicological assays and safety test in Galleria mellonella. Infrared spectrum showed vibrational bands characteristic of amide I, II and III that are linked to the protein content, which was confirmed by the High Performance Liquid Chromatography profile and by the Electrophoresis analysis. This material did not exhibit hemolytic (rate <0.5%) and cytotoxic effects (viability >70%) and was able to enhance the proliferation of fibroblasts (>600%) after 3 days. The pronounced proliferative effect observed in fibroblast cells can be explained by the presence of the fibroblast growth factor (FGF) like protein revealed by the Western blot test. Moreover, NLS did not provoke toxic effects (survival ∼ 80%) on the G. mellonella model, indicating that it is a biocompatible and safe material.

Supercritical Carbon Dioxide Decellularized Bone Matrix Seeded with Adipose-Derived Mesenchymal Stem Cells Accelerated Bone Regeneration

Large bone fractures with segmental defects are a vital phase to accelerate bone integration. The present study examined the role of supercritical carbon dioxide (scCO2) decellularized bone matrix (scDBM) seeded with allogeneic adipose-derived mesenchymal stem cells (ADSC) as bio-scaffold for bone regeneration. Bio-scaffold produced by seeding ADSC to scDBM was evaluated by scanning electron microscopy (SEM). Rat segmental femoral defect model was used as a non-union model to investigate the callus formation in vivo. Histological analysis and osteotomy gap closure in the defect area were analyzed at 12 and 24 weeks post-surgery. Immunohistochemical expression of Ki-67, BMP-2 and osteocalcin was evaluated to assess the ability of new bone formation scDBM. ADSC was found to attach firmly to scDBM bioscaffold as evidenced from SEM images in a dose-dependent manner. Callus formation was observed using X-ray bone imaging in the group with scDBM seeded with 2 × 106 and 5 × 106 ASCs group at the same time-periods. H&E staining revealed ASCs accelerated bone formation. IHC staining depicted the expression of Ki-67, BMP-2, and osteocalcin was elevated in scDBM seeded with 5 × 106 ASCs group at 12 weeks after surgery, relative to other experimental groups. To conclude, scDBM is an excellent scaffold that enhanced the attachment and recruitment of mesenchymal stem cells. scDBM seeded with ASCs accelerated new bone formation.

Biomedical applications of natural rubber latex from the rubber tree Hevea brasiliensis

The past decades have witnessed tremendous progress in biomaterials in terms of functionalities and applications. To realize various functions such as tissue engineering, tissue repair, and controlled release of therapeutics, a biocompatible and biologically active material is often needed. However, it is a difficult task to find either synthetic or natural materials suitable for in vivo applications. Nature has provided us with the natural rubber latex from the rubber tree Hevea brasiliensis, a natural polymer that is biocompatible and has been proved as inducing tissue repair by enhancing the vasculogenesis process, guiding and recruiting cells responsible for osteogenesis, and acting as a solid matrix for controlled drug release. It would be extremely useful if medical devices can be fabricated with materials that have these biological properties. Recently, various types of natural rubber latex-based biomedical devices have been developed to enhance tissue repair by taking advantage of its biological properties. Most of them were used to enhance tissue repair in chronic wounds and critical bone defects. Others were used to design drug release systems to locally release therapeutics in a sustained and controlled manner. Here, we summarize recent progress made in these areas. Specifically, we compare various applications and their performance metrics. We also discuss critical problems with the use of natural rubber latex in biomedical applications and highlight future opportunities for biomedical devices produced either with pre-treated natural rubber latex or with proteins purified from the natural rubber latex.

Concentration-dependent effects of latex F1-protein fraction incorporated into deproteinized bovine bone and biphasic calcium phosphate on the repair of critical-size bone defects

F1-protein fraction (F1) is a natural bioactive compound extracted from the rubber tree, Hevea brasiliensis, and has been recently studied for its therapeutic potential in wound healing. In this study, we investigated the concentration-dependent effects of F1 (0.01%, 0.025%, 0.05%, and 0.1%) incorporated into deproteinized bovine bone (DBB) and porous biphasic calcium phosphate (pBCP), on the repair of rat calvarial critical-size bone defects (CSBD). The defects were analyzed by 3D-microtomography and 2D-histomorphometry at 12 weeks postsurgery. The binding efficiency of F1 to pBCP (96.3 ± 1.4%) was higher than that to DBB (67.7 ± 3.3%). In vivo analysis showed a higher bone volume (BV) gain in all defects treated with DBB (except in 0.1% of F1) and pBCP (except in 0.05% and 0.1% of F1) compared to the CSBD without treatment/control group (9.96 ± 2.8 mm³ ). DBB plus 0.025% F1 promoted the highest BV gain (29.7 ± 2.2 mm³ , p < .0001) compared to DBB without F1 and DBB plus 0.01% and 0.1% of F1. In the pBCP group, incorporation of F1 did not promote bone gain when compared to pBCP without F1 (15.9 ± 4.2 mm³ , p > .05). Additionally, a small BV occurred in defects treated with pBCP plus 0.1% F1 (10.4 ± 1.4 mm^3, p < .05). In conclusion, F1 showed a higher bone formation potential in combination with DBB than with pBCP, in a concentration-dependent manner. Incorporation of 0.25% F1 into DBB showed the best results with respect to bone formation/repair in CSBD. These results suggest that DBB plus 0.25% F1 can be used as a promising bioactive material for application in bone tissue engineering.

Current Stage of Marine Ceramic Grafts for 3D Bone Tissue Regeneration

Bioceramic scaffolds are crucial in tissue engineering for bone regeneration. They usually provide hierarchical porosity, bioactivity, and mechanical support supplying osteoconductive properties and allowing for 3D cell culture. In the case of age-related diseases such as osteoarthritis and osteoporosis, or other bone alterations as alveolar bone resorption or spinal fractures, functional tissue recovery usually requires the use of grafts. These bone grafts or bone void fillers are usually based on porous calcium phosphate grains which, once disposed into the bone defect, act as scaffolds by incorporating, to their own porosity, the intergranular one. Despite their routine use in traumatology and dental applications, specific graft requirements such as osteoinductivity or balanced dissolution rate are still not completely fulfilled. Marine origin bioceramics research opens the possibility to find new sources of bone grafts given the wide diversity of marine materials still largely unexplored. The interest in this field has also been urged by the limitations of synthetic or mammalian-derived grafts already in use and broadly investigated. The present review covers the current stage of major marine origin bioceramic grafts for bone tissue regeneration and their promising properties. Both products already available on the market and those in preclinical phases are included. To understand their clear contribution to the field, the main clinical requirements and the current available biological-derived ceramic grafts with their advantages and limitations have been collected.

Biomimetic piezoelectric nanocomposite membranes synergistically enhance osteogenesis of deproteinized bovine bone grafts

Purpose: The combination of a bone graft with a barrier membrane is the classic method for guided bone regeneration (GBR) treatment. However, the insufficient osteoinductivity of currently-available barrier membranes and the consequent limited bone regeneration often inhibit the efficacy of bone repair. In this study, we utilized the piezoelectric properties of biomaterials to enhance the osteoinductivity of barrier membranes. Methods: A flexible nanocomposite membrane mimicking the piezoelectric properties of natural bone was utilized as the barrier membrane. Its therapeutic efficacy in repairing critical-sized rabbit mandible defects in combination with xenogenic grafts of deproteinized bovine bone (DBB) was explored. The nanocomposite membranes were fabricated with a homogeneous distribution of piezoelectric BaTiO₃ nanoparticles (BTO NPs) embedded within a poly(vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) matrix. Results: The piezoelectric coefficient of the polarized nanocomposite membranes was close to that of human bone. The piezoelectric coefficient of the polarized nanocomposite membranes was highly stable, with more than 90% of the original piezoelectric coefficient (d₃₃) remaining up to 28 days after immersion in culture medium. Compared with commercially-available polytetrafluoroethylene (PTFE) membranes, the polarized BTO/P(VDF-TrFE) nanocomposite membranes exhibited higher osteoinductivity (assessed by immunofluorescence staining for runt-related transcription factor 2 (RUNX-2) expression) and induced significantly earlier neovascularization and complete mature bone-structure formation within the rabbit mandible critical-sized defects after implantation with DBB Bio-Oss® granules. Conclusion: Our findings thus demonstrated that the piezoelectric BTO/P(VDF-TrFE) nanocomposite membranes might be suitable for enhancing the clinical efficacy of GBR.

Synthesis, Characterization, and in Vitro Biological Evaluation of Copper-Containing Magnetic Bioactive Glasses for Hyperthermia in Bone Defect Treatment

Hyperthermia treatment induced by magnetic mesoporous glasses has been applied as a potential therapeutic approach for bone defects due to malignant tumors. The objective of this study was to synthesize and characterize the structural and biological properties of magnetic bioactive glasses (BGs) for producing multifunctional materials. The effect of the addition of copper (Cu) to the bioactive glass composition was also evaluated. Fe BG and FeCu BG as magnetic mesoporous BGs, and Cu BG as mesoporous BG were synthesized and dried by template sol-gel method. Then the synthesized bioglasses were characterized and analyzed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive electron disperse spectroscopy (EDS), Brunauer-Emmett-Teller (BET), and vibrating sample magnetometer (VSM). In addition, the antibacterial behavior, cytotoxicity assay (MTT test), proliferation assay of HUVEC cell assay, and bioactivity (ALP activity test) of the synthesized BGs were evaluated. The characterization results exhibited that the synthesized powders formed mesoporous glasses with nanoparticle morphology, good surface area, and magnetic properties. The synthesized BGs also demonstrated suitable biological behavior. The magnetic saturation of bioactive glasses was increased by the addition of copper oxide. A two-phase structure was observed for the magnetic glasses compared to the copper-containing glasses, thus making them suitable for drug delivery systems. The antibacterial behavior was found to be better for the Cu BG and Fe BG compared to the FeCu BG. However, the least amount of cytotoxicity was observed for the Fe BG and FeCu BG, compared to the Cu BG. In addition, the Fe-containing BGs compared with the control group showed a lack of HUVEC cell proliferation and angiogenesis motivation. From the ALP assay, higher bioactivity for the magnetic bioglasses in the presence of mesenchymal cells was found. From the results of this in vitro study, the Cu-containing magnetic bioglass (FeCu BG) could be considered as a new generation of magnetic glasses for inducing hyperthermia in treatment of bone defects due to malignant tumors. However, further in vitro and in vivo studies are required to confirm their applications in healing of bone defects and tissue engineering.