Quantitative analysis of change in bone volume 5 years after sinus floor elevation using plate-shaped bone substitutes: a prospective observational study

PURPOSE

Tricalcium phosphate (TCP) has osteoconductive ability and reportedly offers similar clinical results as autogenous bone grafts in dental implant treatment. However, few reports quantify temporal changes in augmented bone volume after sinus augmentation. We aimed to establish a three-dimensional (3D) quantification method to assess bone volume after sinus augmentation and to evaluate biocompatibility of the TCP plate.

METHODS

Maxillary sinus floor augmentation was performed employing the lateral window technique, and plate-shaped β-TCP (TCP plate) was used instead of granular bone grafting materials. After lifting the sinus membrane, the TCP plate was inserted and supported by dental implants or micro-screws. The changes in bone volumes in the maxillary sinus before and after surgery were recorded using cone-beam computed tomography, saved as Digital Imaging and Communications in Medicine-formatted files, and transformed to Standard Triangle Language (STL)-formatted files. Pre- and post-operative STL data of bone volume were superimposed, and the augmented bone volume was calculated. Moreover, changes in bone volumes, TCP plate resorption rates, and bone heights surrounding the implants were three dimensionally quantified.

RESULTS

Fifteen implants in nine subjects were included in this study. TCP plates secured long-term space making, with results similar to those of granular bone substitutes. Newly formed bone was identified around the implant without bone graft material. TCP plate was absorbed and gradually disappeared.

CONCLUSIONS

A novel 3D quantification method was established to evaluate changes in bone volume. Clinical application of TCP plate in sinus augmentation could be a better procedure in terms of prognosis and safety.

Current complications and issues of implant superstructure

The purpose of this review is to search for complications of dental implant superstructures and consider the issues involved. This narrative review was performed by searching through PubMed databases and review articles that were published after 1990. Misfitting of the superstructure can result in loosening of screws, reduced preload, and in some cases, significant stress around the implant. External connection modalities and single implant prostheses have been reported to have more loose or broken abutment screws. In addition, when zirconia abutment was used for platform shifting, the rate of fracture of the abutment was considered to be high. Additionally, it was reported that men were significantly at an increased risk of abutment fracture. As for the retention mechanism of implant overdenture, stud attachment (Locator type) should receive more attention to wear and damage of retention parts than other attachments. The causes of the complications of implant superstructures have not been clarified in some cases, and further verification is required. Verification of complications is considered important to obtain a long-term prognosis for superstructures of implants. It will be necessary to further verify complications of implants in the future.

In vitro comparative analysis of scanning accuracy of intraoral and laboratory scanners in measuring the distance between multiple implants

Background

The purpose of this study was to evaluate the accuracy of intraoral scanners by comparing the trueness and precision of several types of scanners in measuring the distance between the ball abutments on pairs of multiple implants.

Methods

Seven implants were placed on a fully edentulous upper jaw model. After ball abutments were attached to the implants on the master model, the three-dimensional (3D) shape of the model was evaluated using a computer numerical control 3D coordinate-measuring machine. Subsequently, the 3D shape-related data of the model were obtained using two types of intraoral scanners (3M True Definition Scanner [TDS] and 3Shape Trios3 [TR3]) and two types of laboratory scanners (KaVo ARCTICA Auto Scan [KA] and Identica Hybrid [IH]). Using the obtained 3D shape-related data, the trueness and precision in measuring the distance between the balls within seven pairs of ball abutments were compared among the scanners using 3D analysis software.

Results

Intraoral scanners produced significantly greater errors in trueness and precision than laboratory scanners in measuring the distances between the ball abutments in all the dental regions. Between the intraoral scanners, powder-requiring TDS produced significantly lower errors at inflection points than powder-free TR3.

Conclusions

These results indicate that an optical impression technique using an intraoral scanner is suitable for dental implant treatment in patients with a few missing teeth.

Characterization of Five Collagenous Biomaterials by SEM Observations, TG-DTA, Collagenase Dissolution Tests and Subcutaneous Implantation Tests

Collagenous biomaterials that are clinically applied in dentistry have dermis-type and membrane-type, both of which are materials for promoting bone and soft tissue formation. The properties of materials supplied with different types could affect their biodegradation periods. The purpose of this study was to characterize five of these products by four different methods: scanning electron microscopy (SEM) observation, thermogravimetry-differential thermal analysis (TG-DTA), 0.01 wt% collagenase dissolution test, and subcutaneous implantation test in vivo. SEM micrographs revealed that both dermis and membranous materials were fibrous and porous. The membranous materials had higher specific derivative thermal gravimetry (DTG) peak temperatures in TG-DTA at around 320 °C, longer collagenase dissolution time ranging from about 300 to 500 min, and more longevity in mice exceeding 9 weeks than the dermis materials. There existed a correlation between the peak temperature in TG-DTA and the collagenase dissolution time. It was considered that higher cross-link degree among collagen fibrils of the membrane-type collagenous materials might account for these phenomena. The experimental protocol and numerical results obtained could be helpful for selection and future development of fibrous collagenous biomaterials in clinical use.

A review of the recent literature on maxillary overdenture with dental implants

The recent literature on maxillary implant overdenture (IOD) was reviewed in order to clarify its predictability and establish treatment guidelines. Electronic searches were performed using PubMed, and articles about maxillary IOD written after 1990 were reviewed, focusing on the following items: I. implant survival rate, II. maxillary IOD survival rate, III. number of implants, IV. attachment type, V. follow-up period, VI. implant system, and VII. opposing dentition. The review revealed an implant survival rate of 61-100% and an overdenture survival rate of 72.4-100%. The attachments used included bars, balls, locators, and telescope crowns. The minimum and maximum observation periods were 12 months and 120 months, respectively, and the number of implants used for supporting IOD ranged from 2 to 8. At present, there is no strong evidence to indicate that maxillary IOD is clearly superior for all the items examined. However, the existing data indicate that maxillary IOD has almost the same therapeutic effect as fixed implant superstructures, and is a treatment option that can be actively adopted for patients in whom fixed superstructures cannot be applied for various reasons.

Uptake of Nanotitania by Gingival Epithelial Cells Promotes Inflammatory Response and Is Accelerated by Porphyromonas gingivalis Lipopolysaccharide: An In Vitro Study

Titanium is often used in the medical field and in dental implants due to its biocompatibility, but it has a high rate of leading to peri-implantitis, which progresses faster than periodontitis. Therefore, in the present study, the expression of cytokines from gingival epithelial cells by nanotitania was investigated, which is derived from titanium in the oral cavity, and the additional effect of Porphyromonasgingivalis (periodontopathic bacteria) lipopolysaccharide (PgLPS) was investigated. Ca9-22 cells were used as a gingival epithelial cell model and were cultured with nanotitania alone or with PgLPS. Cytokine expression was examined by reverse transcription-quantitative polymerase chain reaction and enzyme-linked immunosorbent assay. In addition, cellular uptake of nanotitania was observed in scanning electron microscopy images. The expression of interleukin (IL)-6 and IL-8 significantly increased in Ca9-22 cells by nanotitania treatment alone, and the expression was further increased by the presence of PgLPS. Nanotitania was observed to phagocytose Ca9-22 cells in a dose- and time-dependent manner. Furthermore, when the expression of IL-11, related to bone resorption, was investigated, a significant increase was confirmed by stimulation with nanotitania alone. Therefore, nanotitania could be associated with the onset and exacerbation of peri-implantitis, and the presence of periodontal pathogens may worsen the condition. Further clinical reports are needed to confirm these preliminary results.

Surface attrition of zirconia and hybrid composite resin superstructure during implant therapy

PURPOSE

The purpose of this study was to examine morphological changes in the superstructure of implants in relation to the degree of attrition of the implant superstructure and its antagonists.

METHODS

Thirty-three patients participated. The implant superstructures of the first molar and its antagonists were scanned with an intraoral scanner every 3 months. The amount of attrition was calculated in relation to the various materials used for the superstructure, and differences were analyzed statistically (P < 0.05).

RESULTS

Attrition of the implant superstructure was 110 ± 30 µm for monolithic zirconia and 105 ± 27 µm for resin-veneered metal after 12 months. No statistically significant difference was found between the two groups. In contrast, attrition of the antagonists was 75 ± 25 µm for zirconia and 105 ± 20 µm for resin-veneered metal after 12 months. A statistically significant difference in the attrition levels between the two groups was observed after 9 and 12 months.

CONCLUSION

During the 12-month observation period, there was no difference in superstructure attrition between zirconia and resin-veneered metal. Attrition of the antagonists was higher for hybrid composite resin-veneered metal than for zirconia, suggesting that surface roughness affected the degree of attrition.

Applications of three-dimensional printers in prosthetic dentistry

This narrative review aims to provide an overview of recent studies and case reports on three-dimensional (3D) printing, and to verify the applicability of 3D printers in the field of dental prostheses. This review was performed by conducting a search of PubMed. The clinical application of fabricating a prosthesis made with cobalt-chromium is considered possible depending on the material and hardware of the 3D printer. However, it is currently difficult to assess the clinical use of 3D-printed zirconia crowns. Further research is required, such as verification of materials used, margin morphology, and hardware. Clinically acceptable results have been reported for patterns using 3D printers. Interim restorations made using a 3D printer have been reported with good results that are considered clinically usable. Dentures made with 3D printers need further verification in terms of strength and deformation. Custom trays made with 3D printers are clinically useful, however, issues remain with design time and effort. Although several studies have reported the usefulness of 3D printers, further verification is required since 3D printers are still considered new technology.

Titanium nanoparticles potentially affect gingival tissue through IL-13α2 receptor expression

PURPOSE

To determine the effects of titanium nanoparticles, that may have been scattered after dental implant placement, on gene and promoter expression, and gingival tissue.

METHODS

Ca9-22 cell lines were used as gingival epithelial cells to assess the effects of titanium dioxide nanomaterials as titanium nanoparticles. Cells were cocultured with or without titanium dioxide nanomaterials prior to gene and promoter expression analysis. Expression of interleukin-13α2 receptor was investigated using real-time quantitative reverse-transcription polymerase chain reaction and immunofluorescence staining. Additionally, the enhanced messenger ribonucleic acid (mRNA) expression of transforming growth factor β1 was analyzed using the same method.

RESULTS

Titanium dioxide nanomaterials affected gene and promoter expression in Ca9-22 cells: among the 160 upregulated genes, the upregulation of IL13RA2, which encodes interleukin-13α2 receptor, was the highest (8.625 log₂ fold change). Immunofluorescence staining confirmed the increased expression of interleukin-13α2 receptor, which enhanced transforming growth factor β1 expression by stimulation with interleukin-13.

CONCLUSION

Titanium dioxide nanomaterials applied on the gingival epithelium around the dental implant may increase interleukin-13α2 receptor expression. In turn, this can enhance the secretion of transforming growth factor β1, which is known to promote the differentiation of osteoclasts involved in bone resorption, and potentially affect gingival tissue.

Increase in masseter muscle activity by newly fabricated complete dentures improved brain function

PURPOSE

To reveal effects of improvement of masseter muscle activity on brain function in elderly people wearing complete dentures.

METHODS

Subjects were 14 edentulous patients with a chief complaint of the inconvenience of their complete dentures. The surface electromyographic (EMG) activity of the masseter muscles was measured. Brain activities were analyzed with functional magnetic resonance imaging (fMRI), employing chewing gum as the task program. Cognitive functions were evaluated with Trail Making Test Part A (TMT-A), Rey Auditory Verbal Learning Test (RAVLT) and Rey-Osterrieth Complex Figure Test (R-OCFT). Those evaluations were performed in which subjects wore their old dentures (OD) or newly fabricated dentures (ND).

RESULTS

We compared ND condition with OD condition. The masseter muscle activity significantly increased in ND condition (p < 0.05, Wilcoxon signed rank test). The brain activity increased significantly in the superior frontal gyrus, precentral gyrus, putamen, inferior parietal lobule, cerebellum, inferior frontal lobe, and middle frontal gyrus under the ND condition than under the OD condition (p < 0.01, uncorrected, cluster size > 10 voxels). Results of TMT-A, RAVLT, and R-OCFT were also significantly improved (p < 0.05, Wilcoxon signed rank test).

CONCLUSIONS

In the edentulous elderly, the brain activity was increased following the improvement of the masseter muscle activity. Consequently, it is possible that the improvement of the masseter muscle activity might influ ence on the attention, verbal skills, and visual memory.

Diagnostic accuracy of left ventricular diastolic transverse strain imaging by speckle tracking echocardiography for diagnosing chest pain in diabetic patients

Background

Two-dimensional speckle tracking echocardiography (2D-STE) has been reported to be useful for the diagnosis of myocardial ischemia by detecting delayed relaxation (diastolic stunning) after an episode of angina. 2D-longitudinal strain is not specific besides ischemia such as diastolic dysfunction, and diabetes have been associated with abnormal longitudinal fibers. The aim is to evaluate the diagnostic accuracy of Left ventricular (LV) diastolic transverse strain imaging by STE to detect the presence of acute coronary syndrome (ACS) in diabetic patients with acute chest pain.

Methods

385 consecutive patients with acute chest pain and without wall motion abnormality, who were admitted to an emergency department (ED) at 1 of 12 clinical sites in Japan, were enrolled and underwent 2D-STE at ED. Left ventricular (LV) transverse strain values at aortic valve closure (A) and one-third of diastole duration (B) were measured. The strain imaging diastolic index (SI-DI) was value was determined as: (A − B)/A × 100% to assess the LV diastolic strain imaging and was used to identify the regional LV delayed relaxation. All patients underwent coronary CT or coronary angiography to establish the diagnosis of ACS. Clinicians were blinded to the 2D-STE results.

Results

Out of 385 patients, 2D-STE analysis was possible in 365 patients (94%). 76 patients were diabetic (DM+), and 289 patients were non-diabetic (DM-). With assessment of coronary CT or coronary angiography, ACS was diagnosed in 125 patients (34%). 2D-STE was obtained at a mean of 5.3 hours after chest pain episode. Transverse SI-DI of ischemic segments were significantly lower than those of non-ischemic segments (p value &lt;0.001) in both diabetic and non-diabetic patients, and transverse SI-DI of both diabetic and non-diabetic patients demonstrated high area under curve (AUC) for detection of myocardial ischemia (Figure: RCA; right coronary artery, LAD; left anterior descending artery, LCX; left circumferencial artery). In diabetic patients, sensitivity, specificity, and negative predictive value for ACS of transverse SI-DI are 100%, 95%, 100% in RCA (a cut-off value of 36.2), and 86.4%, 95%, 93% in LAD (a cut-off value of 50.2), and 75%, 85%, 94% in LCX (a cut-off value of 52), respectively.

Conclusion

LV diastolic transverse strain imaging by 2D-STE at ED increase the sensitivity, specificity and accuracy to predict the presence of ACS in diabetic patients with chest pain, as well as non-diabetic patients. (UMIN000013859).

Figure 1. Transverse Strain (SI-DI): AUC (95% CI)

Funding Acknowledgement

Type of funding source: None

Sinus floor elevation using tricalcium phosphate plate

When the sinus is enlarged, it may be necessary to elevate the floor of the maxillary sinus using the crestal or lateral approach. This report presents a case where sinus floor elevation was performed using tricalcium phosphate (TCP) plates supported by implant bodies, and only the blood clot was present around the implant bodies. Cone-beam computed tomography images, taken one year after the lateral approach, revealed the presence of a TCP-like radio-opacity, which almost disappeared after two years. About seven years after the surgery, the patient's superstructure and occlusion were stable. Furthermore, the grafted TCP was completely absorbed, and the implant body appeared to be in good condition, with no signs of bone resorption around the implant.

1225 Diagnostic accuracy of left ventricular diastolic strain imaging by speckle tracking echocardiography in detecting ischemic etiology of acute chest pain

Funding Acknowledgements

none

OnBehalf

A TRAC-SI Multicenter Trial

Background

Two-dimensional speckle tracking echocardiography (2D-STE) has been reported to be useful for the diagnosis of myocardial ischemia by detecting delay in regional myocardial expansion (diastolic stunning) up to many hours after an episode of angina. The aim is to evaluate the diagnostic accuracy of Left ventricular (LV) diastolic longitudinal, circumferential, transverse and radial strain imaging by STE to detect the presence of acute coronary syndrome (ACS) in patients with acute chest pain.

Methods

388 consecutive patients with acute chest pain and without wall motion abnormality, who were admitted to an emergency department (ED) at 1 of 12 clinical sites in Japan, were enrolled and underwent 2D-STE at ED. Left ventricular (LV) longitudinal, circumferential, transverse and radial strain values at aortic valve closure (A) and one-third of diastole duration (B) were measured. The strain imaging diastolic index (SI-DI) was value was determined as: (A-B)/A × 100% to assess the LV diastolic strain imaging and was used to identify the regional LV delayed relaxation. All patients underwent coronary CT or coronary angiography to establish the diagnosis of ACS. Clinicians were blinded to the 2D-STE results.

Results

Out of 388 patients, 2D-STE analysis was possible in 358 patients (92%). With assessment of coronary CT or coronary angiography, ACS was diagnosed in 118 patients (33%). 2D-STE was obtained at a mean of 5.3 hours after chest pain episode. SI-DI of longitudinal, circumferential, transverse and radial strain of ischemic segments were significantly lower than those of non-ischemic segments (p value &lt; 0.001), and transverse and radial SI-DI demonstrated high diagnostic accuracy, compared with longitudinal SI-DI (Figure 1). Sensitivity, specificity, and negative predictive value for ACS of transverse SI-DI are 87%, 88%, % and 95%, respectively, using a cut-off value of 63.3.

Conclusion

LV diastolic strain imaging by 2D-STE at ED increase the sensitivity, specificity and accuracy to predict the presence of ACS in patients with chest pain. Compared with longitudinal diastolic strain imaging, transverse diastolic strain imaging is more sensitive marker to detect the myocardial ischemic episode (UMIN000013859).

Abstract 1225 Figure 1

1407Drug effect of luseogliflozin and voglibose on heart failure with preserved ejection fraction in diabetic patients: a multicenter randomized-controlled trial

Background

Recent randomized, placebo-controlled trial in patients with type 2 diabetes demonstrated that the sodium-glucose cotransporter 2 inhibitors reduced mortality, cardiovascular events and hospitalization for heart failure. However, those trials were not specialized design to investigate the effect of sodium-glucose cotransporter 2 inhibitors in patients with heart failure, in particular with heart failure with preserved ejection fraction.

Purpose

The aim of this study was to evaluate the drug efficacy of luseogliflozin, a sodium-glucose cotransporter 2 inhibitor, compared with voglibose, an alpha-glucosidase inhibitor, using brain natriuretic peptide (BNP) in type 2 diabetes patients with heart failure with preserved ejection fraction.

Methods

This study was a prospective, multicenter, open-label, randomized-controlled trial, comparing luseogliflozin 2.5 mg once daily or voglibose 0.2 mg three times daily in patients with type 2 diabetes suffering from heart failure with preserved ejection fraction (left ventricular ejection fraction >45% and BNP ≥35 pg/ml2) in a 1:1 randomization fashion. Randomization was undertaken using a computer-generated random sequence web response system. The primary outcome was the difference from baseline in BNP after 12 weeks of treatment between two drugs. The key secondary outcomes were the change from baseline in left ventricular ejection fraction and E/e' in echocardiographic parameters, body weight, glycohemoglobin level after 12 weeks of treatment. The safety outcomes included the incidence of major adverse cardiovascular events, hypoglycemic adverse events, and urinary tract infection.

Results

Between December 2015 and September 2018, 173 patients from 16 hospitals and clinics have been included in this study. Of those, 83 patients were assigned to receive luseogliflozin and 82 to receive voglibose. There was no significant difference in the reduction in the BNP concentration after 12 weeks from baseline between the two groups; the ratio of the average values at week 12 to the baseline value was 0.91 in the luseoglifllzin group as compared with 0.98 in the voglibose group (percent change, −9.0% vs. −1.9%, ratio of change with luseogliflozin vs. voglibose, 0.93; 95% confidence interval, 0.78 to 1.10; p=0.26). The key secondary outcomes including left ventricular ejection fraction, E/e', body weight, glycohemoglobin level and the safety outcomes did not differ significantly between the two groups.

Conclusions

In type 2 diabetes patients with heart failure with preserved ejection fraction, the administration of luseogliflozin did not lead to a significant reduction in the BNP concentration than that of voglibose. Left ventricular ejection fraction, E/e', body weight and glycohemoglobin level after 12 weeks of treatment, comparing with at baseline did not differ significantly between the two groups. (UMIN Clinical Trial Registry number, UMINehz748.005618395)

Acknowledgement/Funding

Novartis

Accuracy and practicality of intraoral scanner in dentistry: A literature review

PURPOSE

The digitization of the dental field has been vigorously promoted in recent years. An impression using an intraoral scanner is considered to significantly change future dental treatment. The purpose of this review is to evaluate accuracy and practicality of various intraoral scanners and verification method of intraoral scanners.

STUDY SELECTION

This review was based on articles searched through the MEDLINE and PubMed databases. The main keywords that were employed during the search were "Oral Scanner, Intraoral Scanners, Desktop Scanner, and Digital Impression".

RESULT

It was reported that illuminance and color temperature affected trueness and precision of intraoral scanners. The repeatability of intraoral scanners indicated the possibility of producing fixed prostheses within the range of being partially edentulous. It is considered difficult to use intraoral scanners in fabricating cross-arch fixed prostheses. However, with intraoral scanners, it may be considered possible to fabricate mouth guards and dentures equivalent to those of desktop scanners. Current intraoral scanner scans are considered more comfortable than traditional impressions that use irreversible hydrocolloid and elastomeric impression materials.

CONCLUSION

Since the intraoral scanner is an evolving device, further improvement in accuracy is expected in the future. In addition, verification of the accuracy of intraoral scanners must be conducted accordingly.

Knowledge and Practice of Oral Cancer Screening in Teaching Faculty-Comparison of Specialty and Year of Clinical Experience

The purpose of this study was to assess the knowledge, practice, confidence, and perceived barriers to oral cancer screening among teaching faculty in Japan. Results were compared by specialist as well as years of clinical experience. A 25-question survey was used to assess the oral cancer screening practices of faculty dentists at Iwate Medical University, School of Dental Medicine, the only dental school located in the northeast (Tohoku) region of Japan. The study was approved by the Institutional Review Board of Iwate Medical University. The response rate was 83% (n = 110, 71.8% were male). This survey revealed that only 43.6% of the dentists performed oral cancer screening frequently (always or usually) at the initial appointment, and there was no significant differences between specialists and clinical experience. Visual inspection of the oral cavity was the primary screening method, but the frequency and content of the examination (TMJ and tonsil) was significantly different between specialties. A history of cancer and tobacco use motivated providers to perform an examination and was significantly different between various specialists and clinically experienced providers. In contrast, HPV and alcohol consumption were a weak motivator. The confidence level of providers on their examination knowledge/skills was poor, especially among junior faculty. More than 80% of junior faculty indicated a lack of knowledge/skills as a major barrier.

A comparison of diagnosis of early stage interproximal caries with bitewing radiographs and periapical images using consensus reference

OBJECTIVES:

The purpose of this study was to assess the diagnostic property of intraoral bitewing radiographs (BTW) for early stage interproximal caries, and to compare them with periapical radiographs (PA) at different levels of caries progression.

METHODS:

A total of 241 interproximal surfaces of BTW and corresponding PAs were used. Seven teaching faculty consisting of three oral and maxillofacial radiologists, two operative faculty, and two prosthodontists evaluated the images. The observers graded images as either "intact", "enamel caries <1/2 width", "enamel caries >1/2 width", or "caries into dentin". The gold-standard was established by consensus of two experienced faculty with 35 years and 27 years of experience. Specificity, sensitivity, positive-predictive value, and negative-predictive value were calculated for the different level of caries progression. Furthermore, receiver operating curves) of BTW and PAs of each evaluator were made and the area under the curve of BTW and PAs were compared.

RESULTS:

There was no significant difference in the specificity of BTW and PAs. BTW showed significantly higher sensitivity than PAs in all levels of caries progression (p<0.01). Positive-predictive value and negative-predictive value of BTWs were also significantly higher than PAs. One-way ANOVA and Tukey HSD test showed a significant difference in sensitivity with different levels of caries progression. The average area under the curve was significantly higher for BTWs than PAs (p<0.01).

CONCLUSIONS:

BTWs offer a significant advantage over PAs in the diagnoses of early stages of interproximal carious lesions.

Epithelial cell adhesion efficacy of a novel peptide identified by panning on a smooth titanium surface

Epithelial attachment via the basal lamina on the tooth surface provides an important structural defence mechanism against bacterial invasion in combating periodontal disease. However, when considering dental implants, strong epithelial attachment does not exist throughout the titanium-soft tissue interface, making soft tissues more susceptible to peri-implant disease. This study introduced a novel synthetic peptide (A10) to enhance epithelial attachment. A10 was identified from a bacterial peptide display library and synthesized. A10 and protease-activated receptor 4-activating peptide (PAR4-AP, positive control) were immobilized on commercially pure titanium. The peptide-treated titanium showed high epithelial cell migration ability during incubation in platelet-rich plasma. We confirmed the development of dense and expanded BL (stained by Ln5) with pericellular junctions (stained by ZO1) on the peptide-treated titanium surface. In an adhesion assay of epithelial cells on A10-treated titanium, PAR4-AP-treated titanium, bovine root and non-treated titanium, A10-treated titanium and PAR4-AP-treated titanium showed significantly stronger adhesion than non-treated titanium. PAR4-AP-treated titanium showed significantly higher inflammatory cytokine release than non-treated titanium. There was no significant difference in inflammatory cytokine release between A10-treated and non-treated titanium. These results indicated that A10 could induce the adhesion and migration of epithelial cells with low inflammatory cytokine release. This novel peptide has a potentially useful application that could improve clinical outcomes with titanium implants and abutments by reducing or preventing peri-implant disease.

Function of Platelet-Induced Epithelial Attachment at Titanium Surfaces Inhibits Microbial Colonization

The aim of this study was to evaluate the barrier function of platelet-induced epithelial sheets on titanium surfaces. The lack of functional peri-implant epithelial sealing with basal lamina (BL) attachment at the interface of the implant and the adjacent epithelium allows for bacterial invasion, which may lead to peri-implantitis. Although various approaches have been reported to combat bacterial infection by surface modifications to titanium, none of these have been successful in a clinical application. In our previous study, surface modification with protease-activated receptor 4–activating peptide (PAR4-AP), which induced platelet activation and aggregation, was successful in demonstrating epithelial attachment via BL and epithelial sheet formation on the titanium surface. We hypothesized that the platelet-induced epithelial sheet on PAR4-AP–modified titanium surfaces would reduce bacterial attachment, penetration, and invasion. Titanium surface was modified with PAR4-AP and incubated with platelet-rich plasma (PRP). The aggregated platelets released collagen IV, a critical BL component, onto the PAR4-AP–modified titanium surface. Then, human gingival epithelial cells were seeded on the modified titanium surface and formed epithelial sheets. Green fluorescent protein (GFP)–expressing Escherichia coli was cultured onto PAR4-AP–modified titanium with and without epithelial sheet formation. While Escherichia coli accumulated densely onto the PAR4-AP titanium lacking epithelial sheet, few Escherichia coli were observed on the epithelial sheet on the PAR4-AP surface. No bacterial invasion into the interface of the epithelial sheet and the titanium surface was observed. These in vitro results indicate the efficacy of a platelet-induced epithelial barrier that functions to prevent bacterial attachment, penetration, and invasion on PAR4-AP–modified titanium.

Examination of the Position Accuracy of Implant Abutments Reproduced by Intra-Oral Optical Impression

An impression technique called optical impression using intraoral scanner has attracted attention in digital dentistry. This study aimed to evaluate the accuracy of the optical impression, comparing a virtual model reproduced by an intraoral scanner to a working cast made by conventional silicone impression technique. Two implants were placed on a master model. Working casts made of plaster were fabricated from the master model by silicone impression. The distance between the ball abutments and the angulation between the healing abutments of 5 mm and 7 mm height at master model were measured using Computer Numerical Control Coordinate Measuring Machine (CNCCMM) as control. Working casts were then measured using CNCCMM, and virtual models via stereo lithography data of master model were measured by a three-dimensional analyzing software. The distance between ball abutments of the master model was 9634.9 ± 1.2 μm. The mean values of trueness of the Lava COS and working casts were 64.5 μm and 22.5 μm, respectively, greater than that of control. The mean of precision values of the Lava COS and working casts were 15.6 μm and 13.5 μm, respectively. In the case of a 5-mm-height healing abutment, mean angulation error of the Lava COS was greater than that of the working cast, resulting in significant differences in trueness and precision. However, in the case of a 7-mm-height abutment, mean angulation errors of the Lava COS and the working cast were not significantly different in trueness and precision. Therefore, distance errors of the optical impression were slightly greater than those of conventional impression. Moreover, the trueness and precision of angulation error could be improved in the optical impression using longer healing abutments. In the near future, the development of information technology could enable improvement in the accuracy of the optical impression with intraoral scanners.

Structural alterations of the superior temporal gyrus in schizophrenia: Detailed subregional differences

BACKGROUND

Reduced gray matter volumes in the superior temporal gyrus (STG) have been reported in patients with schizophrenia. Such volumetric abnormalities might denote alterations in cortical thickness, surface area, local gyrification or all of these factors. The STG can be anatomically divided into five subregions using automatic parcellation in FreeSurfer: lateral aspect of the STG, anterior transverse temporal gyrus of Heschl gyrus (HG), planum polare (PP) of the STG, planum temporale (PT) of the STG and transverse temporal sulcus.

METHODS

We acquired magnetic resonance imaging (MRI) 3T scans from 40 age- and sex-matched patients with schizophrenia and 40 healthy subjects, and the scans were automatically processed using FreeSurfer. General linear models were used to assess group differences in regional volumes and detailed thickness, surface area and local gyrification.

RESULTS

As expected, patients with schizophrenia had significantly smaller bilateral STG volumes than healthy subjects. Of the five subregions in the STG, patients with schizophrenia showed significantly and marginally reduced volumes in the lateral aspect of the STG and PT of the STG bilaterally compared with healthy subjects. The volumetric alteration in bilateral lateral STG was derived from both the cortical thickness and surface area but not local gyrification. There was no significant laterality of the alteration in the lateral STG between patients and controls and no correlation among the structures and clinical characteristics.

CONCLUSIONS

These findings suggest that of five anatomical subregions in the STG, the lateral STG is one of the most meaningful regions for brain pathophysiology in schizophrenia.

Effects of apatite particle size in two apatite/collagen composites on the osteogenic differentiation profile of osteoblastic cells

The development of new osteoconductive bone substitute materials is expected in medicine. In this study, we attempted to produce new hydroxylapatite (HAP)/collagen (Col) composites using two HAP particles of different sizes and porcine type I collagen. The two HAP particles were either nano-sized (40 nm in average diameter; n-HAP) or had macro-pore sizes of 0.5–1.0 mm in length with fully interconnected pores (m-HAP). The aim of this study was to investigate the effects of apatite particle size in two HAP/Col composites on the osteogenic differentiation profile in osteoblast-like cells (SaOS-2). We created a collagen control sponge (Col) and two HAP/Col composite sponges (n-HAP/Col and m-HAP/Col) using freeze-drying and dehydrothermal cross-linking techniques, and then punched out samples of 6 mm in diameter and 1 mm in height. The SaOS-2 cells were cultured on three test materials for 1, 2, 3 and 4 weeks. Total RNA was extracted from the cultured cells and the expression of osteogenic differentiation-related genes was evaluated by reverse transcription PCR (RT-PCR) using primer sets of alkaline phosphatase (ALP), type 1 collagen (COL1), bone sialoprotein (BSP) and osteocalcin precursor [bone gamma-carboxyglutamate (gla) protein (BGLAP)] genes, as well as the β-actin gene. The cells were also cultured on Col, n-HAP/Col and m-HAP/Col specimens for 1 and 4 weeks, and were then observed under a scanning electron microscope (SEM). The experimental results were as follows: RT-PCR indicated that osteogenic differentiation, particularly the gene expression of BSP, was most accelerated when the cells were cultured on n-HAP/Col specimens, followed by m-HAP/Col, whilst the weakest accelaeration was observed when the cells were cultured on Col specimens. As shown by the SEM images, the SaOS-2 cells were fibroblastic when cultured on Col specimens for up to 4 weeks; they were fibroblastic when cultured on n-HAP/Col specimens for 1 week, but appeared as spheroids, while actively phagocytizing n-HAP particles at 4 weeks; however, they appeared as deformed fibroblasts when cultured on m-HAP/Col specimens, detached from the particles. Despite limited experimental results, our study suggests that n-HAP/Col may be employed as a new osteoconductive bone substitute material.

Ultrasonographic findings in cubital tunnel syndrome caused by a cubitus varus deformity

We have retrospectively reviewed the clinical, preoperative ultrasonographic, and operative findings of eight patients who had tardy ulnar nerve palsy caused by a cubitus varus deformity. The mean varus angle on the affected side was 23°. With preoperative ultrasonography, the anterior dislocation of the ulnar nerve from the medial epicondyle was detected in dynamic scanning of short-axis images, and long-axis images revealed nerve compression and kinking in the proximal border of the flexor carpi ulnaris. Operative findings revealed compression of the ulnar nerve by a fibrous band, which was released in all cases. The cause of the tardy ulnar nerve palsy in this series of patients was constriction by a fibrous band and kinking in the proximal border of the flexor carpi ulnaris due to ulnar nerve dislocation from compression resulting from the forward movement of the medial head of the triceps brachii muscle.

Multilayer Fresnel Zone Plate For 8KeV X-Ray by DC Magnetron Sputtering Deposition

Hard X-ray microprobes from synchrotron radiation ( SR ) sources should be powerful tools for various fields of research. A Fresnel zone plate ( FZP ) is a promising focusing element for X-ray. In order to develop high performance multilayer FZP for use in hard X-ray region, Ag/C and Cu/Al concentric multilayers were prepared by some deposition parameters. A dependence of the zone boundary structures on the Ar gas pressure was observed: the multilayer prepared at lower Ar gas pressure had smoother zones. Substrate cooling did not improve the zone boundary structures. From the focusing test of the Cu/Al FZP by the SR, a microbeam of 1.3 μ m ø has been obtained for 8 KeV X-ray (λ =0.154nm).

[Implant placement on restricted mesiodistal space with simulation software and guiding system: a case report]

A surgical guiding system with simulation software has recently been used for safe implant treatment. We report a clinical case in which we successfully used this system for implant treatment of a congenital tooth missing region with severely restricted mesiodistal space. The patient was a 19-year-old female whose mandibular right deciduous canine was wobbling without a successional permanent tooth and who desired implant treatment. CT images showed that this site was narrow buccal-lingually and only five millimeters in mesiodistal width. The implant position was planned using simulation software (SimPlant : Materialise Dental) based on CT data and a surgical guide template (SurgiGuide : Materialise Dental) was fabricated prior to the implant surgery. During the implant surgery, the deciduous canine was extracted under local anesthesia. The implant bed was prepared with the surgical guide template and an implant was installed. One month after surgery, the position of the implant was examined with a cone-beam CT, which demonstrated that the implant position was exactly the same as planned. At 5 months, a provisional prosthesis was delivered and optimal soft-tissue condition was formed by modifying the provisional prosthesis. Then, the final impression was taken and a ceramo-metal implant-supported crown was delivered. In this case of a congenital tooth missing region with narrow space, implant treatment with simulation software and the surgical guide system provided excellent clinical results.

Effects of the combination with alpha-tricalcium phosphate and simvastatin on bone regeneration

BACKGROUND

Although local application of statins stimulates bone formation, high dose of simvastatin induces inflammation.

OBJECTIVE

A study was conducted to test the hypothesis that maximum bone regeneration with less inflammation would be achieved by combining an optimal dose of simvastatin with alpha-tricalcium phosphate (alpha-TCP), which is an osteoconductive biomaterial capable of releasing the drug gradually.

MATERIAL AND METHODS

Bilateral 5-mm-diameter calvarial defects were created in adult Wistar rats and filled with preparations of different doses of simvastatin (0, 0.01, 0.1, 0.25 and 0.5 mg) combined with alpha-TCP particles or left empty. The animals were sacrificed at 2, 4 and 8 weeks and analyzed radiologically and histologically. Half of the animals of 4 and 8 weeks were labeled with fluorescence dyes and histomorphometrically analyzed.

RESULTS

Simvastatin doses of 0.25 and 0.5 mg caused inflammation of the soft tissue at the graft site whereas control and other doses did not. The micro-CT analysis revealed that the alpha-TCP with 0.1 mg simvastatin (TCP-0.1) group yielded significantly higher bone volumes than untreated control group at all three time points (249%, 227% and 266% at 2, 4 and 8 weeks, respectively). The percentage of defect closure, bone mineral content and bone mineral density were also higher in the TCP-0.1 group than in the other groups.

CONCLUSION

When combined with alpha-TCP particles, 0.1 mg simvastatin is the optimal dose for stimulation of the maximum bone regeneration in rat calvarial defects without inducing inflammation and it could be applied as an effective bone graft material.

Neurodevelopmental abnormalities associated with severe congenital neutropenia due to the R86X mutation in the HAX1 gene

OBJECTIVE

Severe congenital neutropenia (SCN), also known as Kostmann syndrome (SCN3, OMIM 610738), includes a variety of haematological disorders caused by different genetic abnormalities. Mutations in ELA2 are most often the cause in autosomal dominant or sporadic forms. Recently, mutations in HAX1 have been identified as the cause of some autosomal recessive forms of SCN, including those present in the original pedigree first reported by Kostmann. We sought to determine the relationship between HAX1 gene mutations and the clinical characteristics of Japanese cases of SCN.

METHODS

The genes implicated in SCN (ELA2, HAX1, Gfi-1, WAS, and P14) were analysed in 18 Japanese patients with SCN. The clinical features of these patients were obtained from medical records. Immunoblotting of HAX1 was performed on cell extracts from peripheral blood leucocytes from patients and/or their parents.

RESULTS

We found five patients with HAX1 deficiency and 11 patients with mutations in the ELA2 gene. In HAX1 deficiency, a homozygous single base pair substitution (256C>T), which causes the nonsense change R86X, was identified in three affected individuals. Two sibling patients showed a compound heterozygous mutation consisting of a single base pair substitution (256C>T) and a 59 bp deletion at nucleotides 376-434. There was no detectable phenotype in any heterozygous carrier. All patients with HAX1 deficiency had experienced developmental delay. Three patients carrying R86X also suffered from epileptic seizures. In contrast, no SCN patient with heterozygous mutations in the ELA2 gene suffered from any neurodevelopmental abnormality.

CONCLUSIONS

These findings suggest that the R86X mutation in the HAX1 gene is an abnormality in Japanese SCN patients with HAX1 deficiency and may lead to neurodevelopmental abnormalities and severe myelopoietic defects.

Effects of nutritional supplementation with antioxidant vitamins and minerals and fish oil on antioxidant status and psychosocial stress in smokers: an open trial

Nutritional supplement foods containing antioxidant vitamins and minerals and fish oil (mainly docosahexaenoic acid, DHA, C22:6n-3), referred to as capsules, were administered to seven smokers every day for 34 days. Concentrations of antioxidant vitamins and minerals in serum, activity of superoxide dismutase in plasma and the concentration of 8-isoprostane (8-epi-prostaglandin F(2) alpha) in the urine showed an increase or a tendency to increase after the end of administration. The frequency of subjects showing poor state of psychological health evidenced by a total score of 8 points or more on the General Health Questionnaire (30-item edition) scale was 42.9%, although there was a significant decrease to 14.3% upon completion of administration of the capsules. These biochemical and psychological changes were mostly returned to the basal level one month after the end of administration of the capsules. The results suggest that administration of antioxidant vitamins and minerals and fish oil to smokers resulted in an increase in antioxidant capacity. Effectiveness in alleviating psychosocial stress likely to be attributable to DHA was also observed.

Biodegradation process of alpha-TCP particles and new bone formation in a rabbit cranial defect model

The purpose of the present study was to observe the biodegradation process of pure alpha-tricalcium phosphate (alpha-TCP) particles and to determine the efficacy of alpha-TCP as a space maintainer in a bone defect. We used 14 rabbits and prepared two cranial bone defects in each rabbit. One defect was left empty as a control, whereas the other was filled with alpha-TCP particles about 300 mum in diameter. Animals were sacrificed at 1 week, 4 weeks, and 8 weeks. The cranial bone was then embedded either in paraffin wax for the preparation of decalcified specimens, or in polyester resin for the preparation of nondecalcified specimens. All specimens were evaluated histologically and histomorphometrically. As a consequence of the degradation of alpha-TCP, a "reticulate structure" appeared in the particles at 1 week and new bone was observed in this structure at 8 weeks. The amount of new bone between the control and experimental groups was not significantly different at any of the time points. However, in the experimental group, new bone at the surface of alpha-TCP was evident even in the center of the defect whereas fibrous connective tissue was dominant in the control group. These results indicate that alpha-TCP is a degradable osteoconductive material that is able to act as a space maintainer for bone regeneration when applied to a bone defect. While there was no significant difference in total bone formation between the experimental and negative control groups, the space-maintaining and osteoconductive properties of the particles may result in more complete bone formation in longer-term studies.

[Structure of Escherichia coli uracil DNA glycosylase and its complexes with nonhydrolyzable substrate analogues in solution observed by synchrotron small-angle X-ray scattering]

The structure of native and modified uracil DNA glycosylase from E. coli in solution was studied by synchrotron small-angle X-ray scattering. The modified enzyme (6His-uracyl DNA glycosylase) differs from the native one by the presence of an additional N-terminal 11-meric sequence amino acid residues including a block of six His residues. It was found that the conformations of these enzymes in solution at moderate ionic strength (60 mM NaCI) substantially differ in spite of minimal differences in the amino acid sequences and functional activity. The structure of native uracil DNA glycosylase in solution is close to that in crystal, showing a tendency for association. The interaction of this enzyme with nonhydrolyzable analogues of DNA ligands causes a partial dissociation of associates and a compactization of protein structure. At the same time, 6His-uracyl DNA glycosylase has a compact structure essentially different from the crystal one. A decrease in the ionic strength of solution results in a partial disruption of compact structure of the modified protein, without changes in its functional activity.

Hepatic portal venous gas associated with nonocclusive mesenteric ischemia in a hemodialysis patient

Hepatic portal venous gas (HPVG) has been rarely described in chronic hemodialysis patients. We report a case of HPVG in a 59-year-old female patient with hemodialysis-dependent chronic renal failure due to diabetes who presented with acute onset of abdominal pain. Abdominal CT demonstrated the presence of gas in the portal veins. However, on laparotomy, no evidence of bowel necrosis or perforation could be found. HPVG seemed to be caused by nonocclusive mesenteric ischemia (NOMI), an increasingly recognized complication in hemodialysis patients. The patient responded favorably to intravenous hyperalimentation and antibiotics.

Multiple probes reveal a native-like intermediate during low-temperature refolding of ubiquitin

We investigate the refolding of ubiquitin Phe45Trp/Ile61Ala (Ub(*)I61A) in a low-temperature, high-viscosity buffer, where folding is slowed so that apparent two-state and three-state mechanisms are readily distinguishable. Ub(*)I61A forms a compact ensemble rapidly (as judged from stopped-flow, small-angle X-ray scattering) with a secondary structure signature similar to that of the native state (as judged from stopped-flow circular dichroism from 215 nm to 250 nm), but the fluorescence signature still resembles the guanidinium-denatured state. The compact ensemble forms over a range of solvent and temperature conditions. The native fluorescence signature, which requires the tryptophan residue to be packed tightly, is acquired at least 500 times more slowly. Molecular dynamics simulations at 495 K show no contraction of the backbone in ethylene glycol buffer compared to pure aqueous buffer, and no significant effect on the local backbone structure of the unfolded protein. Only at higher simulation temperature does a backbone contraction appear. Thus, it appears unlikely that the aqueous ethylene glycol buffer fundamentally changes the folding mechanism of ubiquitin. We suggest that ubiquitin forms a compact ensemble with native-like secondary structure, but without tight packing, long before the native state.

Exercise-induced acute renal failure with renal hypouricemia: a case report and a review of the literature

A previously healthy 16-year-old boy developed acute renal failure following a track race at a local athletic meeting. Several hours after the run, he expressed pain in the loins with nausea and vomiting. After 3 sessions of hemodialysis, he was referred to our hospital. On admission, serum creatinine was elevated to 2.3 mg/dl without an increase in serum uric acid level. After recovery from acute renal failure (ARF), hypouricemia (0.7 mg/dl) became evident in the patient. One year later, he suffered from ARF after a track race with the highest creatinine levels of 1.1 mg/dl. In order to clarify the cause and prognosis of ARF with renal hypouricemia, we summarized the clinical features in 18 patients previously described and our patient. Serum uric acid levels after recovery from ARF were below 1.0 mg/dl in all patients. Renal biopsy in 9 patients showed acute tubular necrosis in 8 patients and uric acid nephropathy in 1. The short-term prognosis of these patients seemed good, although 5 patients needed to undergo hemodialysis in their ARF courses. However, the recurrence of ARF episodes occurred in 6 patients (31.6%) including our patient, indicating that prevention of ARF might be necessary in these patients. More information is required to establish guidance for prevention of ARF.