Localization of DNA binding activity of HIV-1 integrase to the C-terminal half of the protein

Multimodal Functionalities of HIV-1 Integrase

Integrase is the retroviral protein responsible for integrating reverse transcripts into cellular genomes. Co-packaged with viral RNA and reverse transcriptase into capsid-encased viral cores, human immunodeficiency virus 1 (HIV-1) integrase has long been implicated in reverse transcription and virion maturation. However, the underlying mechanisms of integrase in these non-catalytic-related viral replication steps have remained elusive. Recent results have shown that integrase binds genomic RNA in virions, and that mutational or pharmacological disruption of integrase-RNA binding yields eccentric virion particles with ribonucleoprotein complexes situated outside of the capsid shell. Such viruses are defective for reverse transcription due to preferential loss of integrase and viral RNA from infected target cells. Parallel research has revealed defective integrase-RNA binding and eccentric particle formation as common features of class II integrase mutant viruses, a phenotypic grouping of viruses that display defects at steps beyond integration. In light of these new findings, we propose three new subclasses of class II mutant viruses (a, b, and c), all of which are defective for integrase-RNA binding and particle morphogenesis, but differ based on distinct underlying mechanisms exhibited by the associated integrase mutant proteins. We also assess how these findings inform the role of integrase in HIV-1 particle maturation.

Retroviral integrase protein and intasome nucleoprotein complex structures

Retroviral replication proceeds through the integration of a DNA copy of the viral RNA genome into the host cellular genome, a process that is mediated by the viral integrase (IN) protein. IN catalyzes two distinct chemical reactions: 3’-processing, whereby the viral DNA is recessed by a di- or trinucleotide at its 3’-ends, and strand transfer, in which the processed viral DNA ends are inserted into host chromosomal DNA. Although IN has been studied as a recombinant protein since the 1980s, detailed structural understanding of its catalytic functions awaited high resolution structures of functional IN-DNA complexes or intasomes, initially obtained in 2010 for the spumavirus prototype foamy virus (PFV). Since then, two additional retroviral intasome structures, from the α-retrovirus Rous sarcoma virus (RSV) and β-retrovirus mouse mammary tumor virus (MMTV), have emerged. Here, we briefly review the history of IN structural biology prior to the intasome era, and then compare the intasome structures of PFV, MMTV and RSV in detail. Whereas the PFV intasome is characterized by a tetrameric assembly of IN around the viral DNA ends, the newer structures harbor octameric IN assemblies. Although the higher order architectures of MMTV and RSV intasomes differ from that of the PFV intasome, they possess remarkably similar intasomal core structures. Thus, retroviral integration machineries have adapted evolutionarily to utilize disparate IN elements to construct convergent intasome core structures for catalytic function.

Retroviral Integrase Structure and DNA Recombination Mechanism

Due to the importance of human immunodeficiency virus type 1 (HIV-1) integrase as a drug target, the biochemistry and structural aspects of retroviral DNA integration have been the focus of intensive research during the past three decades. The retroviral integrase enzyme acts on the linear double-stranded viral DNA product of reverse transcription. Integrase cleaves specific phosphodiester bonds near the viral DNA ends during the 3' processing reaction. The enzyme then uses the resulting viral DNA 3'-OH groups during strand transfer to cut chromosomal target DNA, which simultaneously joins both viral DNA ends to target DNA 5'-phosphates. Both reactions proceed via direct transesterification of scissile phosphodiester bonds by attacking nucleophiles: a water molecule for 3' processing, and the viral DNA 3'-OH for strand transfer. X-ray crystal structures of prototype foamy virus integrase-DNA complexes revealed the architectures of the key nucleoprotein complexes that form sequentially during the integration process and explained the roles of active site metal ions in catalysis. X-ray crystallography furthermore elucidated the mechanism of action of HIV-1 integrase strand transfer inhibitors, which are currently used to treat AIDS patients, and provided valuable insights into the mechanisms of viral drug resistance.

Structural dynamics of native and V260E mutant C-terminal domain of HIV-1 integrase

The C-terminal domain (CTD) of HIV-1 integrase is a five stranded β-barrel resembling an SH3 fold. Mutational studies on isolated CTD and full-length IN have reported V260E mutant as either homo-dimerization defective or affecting the stability and folding of CTD. In this study, molecular dynamics simulation techniques were used to unveil the effect of V260E mutation on isolated CTD monomer and dimer. Both monomeric and dimeric forms of wild type and V260E mutant are highly stable during the simulated period. However, the stabilizing π-stacking interaction between Trp243 and Trp243' at the dimer interface is highly disturbed in CTD-V260E (>6 Å apart). The loss in entropy for dimerization is -30 and -25 kcal/mol for CTD-wt and CTD-V260E respectively signifying a weak hydrophobic interaction and its perturbation in CTD-V260E. The mutant Glu260 exhibits strong attraction/repulsion with all the basic/acidic residues of CTD. In addition to this, the dynamics of CTD-wild type and V260E monomers at 498 K was analyzed to elucidate the effect of V260E mutation on CTD folding. Increase in SASA and reduction in the number of contacts in CTD-V260E during simulation highlights the instability caused by the mutation. In general, V260E mutation affects both multimerization and protein folding with a pronounced effect on protein folding rather than multimerization. This study emphasizes the importance of the hydrophobic nature and SH3 fold of CTD in proper functioning of HIV integrase and perturbing this nature would be a rational approach toward designing more selective and potent allosteric anti-HIV inhibitors.

Mutagenesis of Lysines 156 and 159 in Human Immunodeficiency Virus Type 1 Integrase (IN) Reveals Differential Interactions between these Residues and Different IN Inhibitors

Human immunodeficiency virus (HIV) type 1 integrase (IN) active site, and viral DNA-binding residues K156 and K159 are predicted to interact both with strand transfer-selective IN inhibitors (STI), e.g. L-731,988, Elvitegravir (EVG), and the FDA-approved IN inhibitor, Raltegravir (RGV), and strand transfer non-selective inhibitors, e.g. dicaffeoyltartaric acids (DCTAs), e.g. L-chicoric acid (L-CA). To test posited roles for these two lysine residues in inhibitor action we assayed the potency of L-CA and several STI against a panel of K156 and K159 mutants. Mutagenesis of K156 conferred resistance to L-CA and mutagenesis of either K156 or K159 conferred resistance to STI indicating that the cationic charge at these two viral DNA-binding residues is important for inhibitor potency. IN K156N, a reported polymorphism associated with resistance to RGV, conferred resistance to L-CA and STI as well. To investigate the apparent preference L-CA exhibits for interactions with K156, we assayed the potency of several hybrid inhibitors containing combinations of DCTA and STI pharmacophores against recombinant IN K156A or K159A. Although K156A conferred resistance to diketo acid-branched bis-catechol hybrid inhibitors, neither K156A nor K159A conferred resistance to their monocatechol counterparts, suggesting that bis-catechol moieties direct DCTAs toward K156. In contrast, STI were more promiscuous in their interaction with K156 and K159. Taken together, the results of this study indicate that DCTAs interact with IN in a manner different than that of STI and suggest that DCTAs are an attractive candidate chemotype for development into drugs potent against STI-resistant IN.

Uneven genetic robustness of HIV-1 integrase

Genetic robustness (tolerance of mutation) may be a naturally selected property in some viruses, because it should enhance adaptability. Robustness should be especially beneficial to viruses like HIV-1 that exhibit high mutation rates and exist in immunologically hostile environments. Surprisingly, however, the HIV-1 capsid protein (CA) exhibits extreme fragility. To determine whether fragility is a general property of HIV-1 proteins, we created a large library of random, single-amino-acid mutants in HIV-1 integrase (IN), covering >40% of amino acid positions. Despite similar degrees of sequence variation in naturally occurring IN and CA sequences, we found that HIV-1 IN was significantly more robust than CA, with random nonsilent IN mutations only half as likely to cause lethal defects. Interestingly, IN and CA were similar in that a subset of mutations with high in vitro fitness were rare in natural populations. IN mutations of this type were more likely to occur in the buried interior of the modeled HIV-1 intasome, suggesting that even very subtle fitness effects suppress variation in natural HIV-1 populations. Lethal mutations, in particular those that perturbed particle production, proteolytic processing, and particle-associated IN levels, were strikingly localized at specific IN subunit interfaces. This observation strongly suggests that binding interactions between particular IN subunits regulate proteolysis during HIV-1 virion morphogenesis. Overall, use of the IN mutant library in conjunction with structural models demonstrates the overall robustness of IN and highlights particular regions of vulnerability that may be targeted in therapeutic interventions.

IMPORTANCE

The HIV-1 integrase (IN) protein is responsible for the integration of the viral genome into the host cell chromosome. To measure the capacity of IN to maintain function in the face of mutation, and to probe structure/function relationships, we created a library of random single-amino-acid IN mutations that could mimic the types of mutations that naturally occur during HIV-1 infection. Previously, we measured the robustness of HIV-1 capsid in this manner and determined that it is extremely intolerant of mutation. In contrast to CA, HIV-1 IN proved relatively robust, with far fewer mutations causing lethal defects. However, when we subsequently mapped the lethal mutations onto a model of the structure of the multisubunit IN-viral DNA complex, we found the lethal mutations that caused virus morphogenesis defects tended to be highly localized at subunit interfaces. This discovery of vulnerable regions of HIV-1 IN could inform development of novel therapeutics.

Integrase residues that determine nucleotide preferences at sites of HIV-1 integration: implications for the mechanism of target DNA binding

Retroviruses favor target-DNA (tDNA) distortion and particular bases at sites of integration, but the mechanism underlying HIV-1 selectivity is unknown. Crystal structures revealed a network of prototype foamy virus (PFV) integrase residues that distort tDNA: Ala188 and Arg329 interact with tDNA bases, while Arg362 contacts the phosphodiester backbone. HIV-1 integrase residues Ser119, Arg231, and Lys258 were identified here as analogs of PFV integrase residues Ala188, Arg329 and Arg362, respectively. Thirteen integrase mutations were analyzed for effects on integrase activity in vitro and during virus infection, yielding a total of 1610 unique HIV-1 integration sites. Purine (R)/pyrimidine (Y) dinucleotide sequence analysis revealed HIV-1 prefers the tDNA signature (0)RYXRY(4), which accordingly favors overlapping flexible dinucleotides at the center of the integration site. Consistent with roles for Arg231 and Lys258 in sequence specific and non-specific binding, respectively, the R231E mutation altered integration site nucleotide preferences while K258E had no effect. S119A and S119T integrase mutations significantly altered base preferences at positions −3 and 7 from the site of viral DNA joining. The S119A preference moreover mimicked wild-type PFV selectivity at these positions. We conclude that HIV-1 IN residue Ser119 and PFV IN residue Ala188 contact analogous tDNA bases to effect virus integration.

A homology model of HIV-1 integrase and analysis of mutations designed to test the model

Although there are structures of the different domains of human immunodeficiency virus type 1 (HIV-1) integrase (IN), there is no structure of the entire protein. The recently determined crystal structures of the prototype foamy virus (PFV) IN tetramer, in complexes with viral DNA, led to the generation of models of full-length HIV-1 IN. These models were generated, in part, by superimposing the structures of the domains of HIV-1 IN onto the structure of full-length PFV IN. We developed a model for HIV-1 IN-based solely on its sequence alignment with PFV IN-that differs in several ways from the previous models. Specifically, in our model, the junction between the catalytic core domain and C-terminal domain adopts a helix-loop-helix motif that is similar to the corresponding segment of PFV IN and differs from the crystal structures of these two HIV-1 IN domains. The alignment of residues in the C-terminal domain also differs from the previous models. Our model can be used to explain the phenotype of previously published HIV-1 IN mutants. We made additional mutants, and the behavior of these new mutants provides additional support for the model.

Role of host-encoded proteins in restriction of retroviral integration

In retroviral infections, a copy of the viral DNA is first synthesized from genomic RNA by reverse transcription and subsequently integrated into host chromatin. This integration step, executed by the viral enzyme integrase (IN), is one of the hallmarks of retroviral infection. Although an obligate role for IN in retroviral integration has been clearly defined by numerous biochemical analysis of its recombinant protein and genetic analysis of the viral IN gene, several host cellular proteins have also been implicated as key factors involved in the integration step during viral replication. Although studies on integration cofactors have mostly emphasized factors that aid the integration process either through direct or indirect association with IN, it has become apparent that host cells may also harbor proteins that act as inhibitors of retroviral integration. Intriguingly, some of these inhibitory proteins appear to hamper the integration process via posttranslational modifications of the components of the preintegration complex including IN. A better understanding of the molecular mechanisms leading to the inhibition of integration will provide us with clues for the development of new strategies for treating retroviral infections. In this review, we draw attention to recent insights regarding potential host cellular factors that restrict integration, and illustrate how these inhibitory effects are achieved.

In vitro DNA tethering of HIV-1 integrase by the transcriptional coactivator LEDGF/p75

Although LEDGF/p75 is believed to act as a cellular cofactor of lentiviral integration by tethering integrase (IN) to chromatin, there is no good in vitro model to analyze this functionality. We designed an AlphaScreen assay to study how LEDGF/p75 modulates the interaction of human immunodeficiency virus type 1 IN with DNA. IN bound with similar affinity to DNA mimicking the long terminal repeat or to random DNA. While LEDGF/p75 bound DNA strongly, a mutant of LEDGF/p75 with compromised nuclear localization signal (NLS)/AT hook interacted weakly, and the LEDGF/p75 PWWP domain did not interact, corroborating previous reports on the role of NLS and AT hooks in charge-dependent DNA binding. LEDGF/p75 stimulated IN binding to DNA 10-fold to 30-fold. Stimulation of IN-DNA binding required a direct interaction between IN and the C-terminus of LEDGF/p75. Addition of either the C-terminus of LEDGF/p75 (amino acids 325-530) or LEDGF/p75 mutated in the NLS/AT hooks interfered with IN binding to DNA. Our results are consistent with an in vitro model of LEDGF/p75-mediated tethering of IN to DNA. The inhibition of IN-DNA interaction by the LEDGF/p75 C-terminus may provide a novel strategy for the inhibition of HIV IN activity and may explain the potent inhibition of HIV replication observed after the overexpression of C-terminal fragments in cell culture.

Structural biology of retroviral DNA integration

Three-dimensional macromolecular structures shed critical light on biological mechanism and facilitate development of small molecule inhibitors. Clinical success of raltegravir, a potent inhibitor of HIV-1 integrase, demonstrated the utility of this viral DNA recombinase as an antiviral target. A variety of partial integrase structures reported in the past 16 years have been instrumental and very informative to the field. Nonetheless, because integrase protein fragments are unable to functionally engage the viral DNA substrate critical for strand transfer inhibitor binding, the early structures did little to materially impact drug development efforts. However, recent results based on prototype foamy virus integrase have fully reversed this trend, as a number of X-ray crystal structures of active integrase-DNA complexes revealed key mechanistic details and moreover established the foundation of HIV-1 integrase strand transfer inhibitor action. In this review we discuss the landmarks in the progress of integrase structural biology during the past 17 years.

Reverse Transcriptase and Cellular Factors: Regulators of HIV-1 Reverse Transcription

There is ample evidence that synthesis of HIV-1 proviral DNA from the viral RNA genome during reverse transcription requires host factors. However, only a few cellular proteins have been described in detail that affect reverse transcription and interact with reverse transcriptase (RT). HIV-1 integrase is an RT binding protein and a number of IN-binding proteins including INI1, components of the Sin3a complex, and Gemin2 affect reverse transcription. In addition, recent studies implicate the cellular proteins HuR, AKAP149, and DNA topoisomerase I in reverse transcription through an interaction with RT. In this review we will consider interactions of reverse transcription complex with viral and cellular factors and how they affect the reverse transcription process.

Mutations in the catalytic core or the C-terminus of murine leukemia virus (MLV) integrase disrupt virion infectivity and exert diverse effects on reverse transcription

Understanding of the structures and functions of the retroviral integrase (IN), a key enzyme in the viral replication cycle, is essential for developing antiretroviral treatments and facilitating the development of safer gene therapy vehicles. Thus, four MLV IN-mutants were constructed in the context of a retroviral vector system, harbouring either a substitution in the catalytic centre, deletions in the C-terminus, or combinations of both modifications. IN-mutants were tested for their performance in different stages of the viral replication cycle: RNA-packaging; RT-activity; transient and stable infection efficiency; dynamics of reverse transcription and nuclear entry. All mutant vectors packaged viral RNA with wild-type efficiencies and displayed only slight reductions in RT-activity. Deletion of either the IN C-terminus alone, or in addition to part of the catalytic domain exerted contrasting effects on intracellular viral DNA levels, implying that IN influences reverse transcription in more than one direction.

Posttranslational acetylation of the human immunodeficiency virus type 1 integrase carboxyl-terminal domain is dispensable for viral replication

A recent report sought to demonstrate that acetylation of specific lysines within integrase (IN) by the histone acetyltransferase (HAT) p300 regulates human immunodeficiency virus type 1 (HIV-1) integration and is essential for viral replication (A. Cereseto, L. Manganaro, M. I. Gutierrez, M. Terreni, A. Fittipaldi, M. Lusic, A. Marcello, and M. Giacca, EMBO J. 24:3070-3081, 2005). We can corroborate the efficient and specific acetylation of the IN carboxyl-terminal domain (CTD) (amino acids 212 to 288) by p300 using purified recombinant components. Although arginine substitution mutagenesis of the isolated CTD confirms that the majority of p300 acetylation occurs at lysine residues 264, 266, and 273, the pattern of acetylation is not uniform and a hierarchy of reactivity can be established. Several combinatorial mutations of the CTD lysines modified by p300 in vitro were reconstructed into an otherwise infectious proviral plasmid clone and examined for viral growth and frequency of productive chromosomal integration. In contrast to the findings of Cereseto and coworkers, who used epitope-tagged viruses for their experiments, we find that an untagged mutant virus, IN K(264/266/273)R, is fully replication competent. This discrepancy may be explained by the use of an acidic epitope tag placed at the extreme carboxyl terminus of integrase, near the target site for acetylation. Although the tagged, wild-type virus is viable, the combination of this epitope tag with the RRR substitution mutation results in a replication-defective phenotype. Although IN belongs to the very small set of nonhistone proteins modified by HAT-mediated activity, an obligate role for acetylation at the reactive CTD lysines in HIV-1 IN cannot be confirmed.

Genetic analyses of conserved residues in the carboxyl-terminal domain of human immunodeficiency virus type 1 integrase

Results of in vitro assays identified residues in the C-terminal domain (CTD) of human immunodeficiency virus type 1 (HIV-1) integrase (IN) important for IN-IN and IN-DNA interactions, but the potential roles of these residues in virus replication were mostly unknown. Sixteen CTD residues were targeted here, generating 24 mutant viruses. Replication-defective mutants were typed as class I (blocked at integration) or class II (additional reverse transcription and/or assembly defects). Most defective viruses (15 of 17) displayed reverse transcription defects. In contrast, replication-defective HIV-1(E246K) synthesized near-normal cDNA levels but processing of Pr55(gag) was largely inhibited in virus-producing cells. Because single-round HIV-1(E246K.Luc(R-)) transduced cells at approximately 8% of the wild-type level, we concluded that the late-stage processing defect contributed significantly to the overall replication defect of HIV-1(E246K). Results of complementation assays revealed that the CTD could function in trans to the catalytic core domain (CCD) in in vitro assays, and we since determined that certain class I and class II mutants defined a novel genetic complementation group that functioned in cells independently of IN domain boundaries. Seven of eight novel Vpr-IN mutant proteins efficiently trans-complemented class I active-site mutant virus, demonstrating catalytically active CTD mutant proteins during infection. Because most of these mutants inefficiently complemented a class II CCD mutant virus, the majority of CTD mutants were likely more defective for interactions with cellular and/or viral components that affected reverse transcription and/or preintegration trafficking than the catalytic activity of the IN enzyme.

Unintegrated lentivirus DNA persistence and accessibility to expression in nondividing cells: analysis with class I integrase mutants

The circumstances under which unintegrated lentivirus DNA can persist and be a functional template for transcription and protein expression are not clear. We constructed and validated the first class I (nonpleiotropic) integrase (IN) mutants for a non-human lentivirus (feline immunodeficiency virus [FIV]) and analyzed both these and known class I human immunodeficiency virus type 1 IN mutants. The FIV IN mutants (D66V and D66V/D118A) had class I properties: Gag/Pol precursor expression, proteolytic processing, particle formation, and reverse transcriptase (RT) production were normal, while the transduction of dividing fibroblasts was prevented and integration was blocked. When injected into rat retinas, the wild-type (WT) vector produced extensive, persistent transgene expression, compared with only rare positive neuronal cells for the IN mutant vector. In contrast, both WT and mutant vectors produced entirely equivalent, effective transduction levels of primary rat neurons (retinal ganglion cells). By testing the hypothesis that the unexpected retinal neuron transduction was related to cell cycle status, we found that when fibroblasts were growth arrested, transduction and internally promoted transgene expression were not inhibited at all by the class I FIV or HIV-1 IN mutations. Cells were then transduced under aphidicolin arrest and were released from the block 48 h later. Vector expression was stable and durable during repeated passaging in WT vector-transduced cells, while the release of cells transduced with equivalent RT units of class I IN mutant FIV or HIV vector resulted in a steady decline of expression, from 97 to 0% of cells by day 10. Southern blot and PCR analyses showed a lack of integration, irrespective of cell cycle, for the class I mutants and an increase in one- and two-long terminal repeat circular and linear unintegrated DNAs in growth-arrested cells. We conclude that if cell division is prevented, unintegrated FIV and HIV-1 vector DNAs can produce high-level internally promoted transgene expression equivalent to WT vectors. The expression correlates with the unintegrated DNA levels. These observations may facilitate the study of the roles of IN and other preintegration complex components in preintegration phases of infection by (i) providing an alternative way to monitor unintegrated nuclear cDNA forms, (ii) restricting ascertainment to the transcriptionally functional subset of unintegrated DNA, (iii) enabling analysis in individual, nondividing cells, and (iv) uncoupling other potential functions of IN from integration.

Mapping the epitope of an inhibitory monoclonal antibody to the C-terminal DNA-binding domain of HIV-1 integrase

Integrase (IN) catalyzes the insertion of retroviral DNA into chromosomal DNA of a host cell and is one of three virus-encoded enzymes that are required for replication. A library of monoclonal antibodies against human immunodeficiency virus type 1 (HIV-1) IN was raised and characterized in our laboratory. Among them, monoclonal antibody (mAb) 33 and mAb32 compete for binding to the C-terminal domain of the HIV-1 IN protein. Here, we show that mAb33 is a strong inhibitor of IN catalytic activity, whereas mAb32 is only weakly inhibitory. Furthermore, as the Fab fragment of mAb32 had no effect on IN activity, inhibition by this mAb may result solely from its bivalency. In contrast, Fab33 did inhibit IN catalytic activity, although bivalent binding by mAb33 may enhance the inhibition. Interaction with Fab33 also prevented DNA binding to the isolated C-terminal domain of IN. Results from size-exclusion chromatography, gel electrophoresis, and matrix-assisted laser desorption ionization time-of-flight mass spectrometric analyses revealed that multiple Fab33 small middle dotIN C-terminal domain complexes exist in solution. Studies using heteronuclear NMR showed a steep decrease in (1)H-(15)N cross-peak intensity for 8 residues in the isolated C-terminal domain upon binding of Fab33, indicating that these residues become immobilized in the complex. Among them, Ala(239) and Ile(251) are buried in the interior of the domain, whereas the remaining residues (Phe(223), Arg(224), Tyr(226), Lys(244), Ile(267), and Ile(268)) form a contiguous, solvent-accessible patch on the surface of the protein likely including the epitope of Fab33. Molecular modeling of Fab33 followed by computer-assisted docking with the IN C-terminal domain suggested a structure for the antibody-antigen complex that is consistent with our experimental data and suggested a potential target for anti-AIDS drug design.

Target integration by a chimeric Sp1 zinc finger domain-Moloney murine leukemia virus integrase in vivo

A specificity protein 1 (Sp1) zinc finger domain containing two tandem zinc fingers was fused to the C terminus of the integrase (IN) protein of the Moloney murine leukemia virus (MuLV). The integrity of the MuLV IN was completely preserved, since the fusion was conducted at the last amino acid residue of the protein. The vector pMIN-Sp1, which carried the fused MuLV IN-Sp1 zinc finger domain gene, was cotransfected with a wild-type MuLV vector pMLV-K to NIH/3T3 cells. A nonradioactive reverse transcriptase assay was performed on culture supernatants collected from the cotransfected cells to confirm the production of recombinant viruses. The expression of the fusion protein and the integration of the MuLV genome by the fusion protein were confirmed by a Northern and then a Southern hybridization analysis on the total RNA or genomic DNA extracted from cells infected by viruses collected from the supernatants of the cotransfected cells. Regions of the host chromosome that were selected by the fusion protein as the integration targets were sequenced using the TOPO(TM) cloning method on a series of PCR products generated with a nested set of primers. The percentage of positive clones screened that contained the DNA-binding sequence of the fused Sp1 zinc finger domain was around 13% (5 out of 39 clones). It was found that the Sp1 DNA-binding sequence was only present in regions that were proximal to one of the long terminal repeats of the integrated viral genome, suggesting that the fusion protein could select a target sequence for integration. The host flanking sequences determined for all the positive clones were also used as queries to perform a BLAST search on the GenBank mouse EST entries. Although matching scores for sequences of some of the clones computed were more significant than others, it was difficult to judge whether or not the integration in these clones had been targeted to some gene sequences. Most of the integration sites might exist in the introns, since we found that the probability of the gene sequences containing an Sp1 DNA-binding site was low.

Role of the nonspecific DNA-binding region and alpha helices within the core domain of retroviral integrase in selecting target DNA sites for integration

Retroviral integrase plays an important role in choosing host chromosomal sites for integration of the cDNA copy of the viral genome. The domain responsible for target site selection has been previously mapped to the central core of the protein (amino acid residues 49-238). Chimeric integrases between human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) were prepared to examine the involvement of a nonspecific DNA-binding region (residues 213-266) and certain alpha helices within the core domain in target site selection. Determination of the distribution and frequency of integration events of the chimeric integrases narrowed the target site-specifying motif to within residues 49-187 and showed that alpha 3 and alpha 4 helices (residues 123-166) were not involved in target site selection. Furthermore, the chimera with the alpha 2 helix (residues 118-121) of FIV identity displayed characteristic integration events from both HIV-1 and FIV integrases. The results indicate that the alpha 2 helix plays a role in target site preference as either part of a larger or multiple target site-specifying motif.

Mutational analysis of the N-terminus of Moloney murine leukemia virus integrase

The retroviral integrase (IN) carries out the integration of viral DNA into the host genome. The IN protein consists of three domains: the N-terminal HHCC motif, the catalytic core region, and the C-terminus. The Moloney murine leukemia virus (M-MuLV) IN encodes a unique 45-amino-acid domain N-terminal to the HHCC motif. The function of the N-terminus of M-MuLV IN was studied through deletional and mutational analyses. The IN 1-105 domain was dissected into two halves expressing either the unique N-terminus or the HHCC domain. Although the parental IN 1-105 could functionally complement the core-C-terminus for integration reactions, neither half of the N-terminus was sufficient. Partial complementation of strand transfer, but not 3prime prime or minute processing, could be obtained through mixing the two halves. The dimerization of the M-MuLV N-terminus was dependent on the expression of the intact 1-105. Critical basic amino acids within the HHCC domain which are required for 3' processing and strand transfer reactions were identified through alanine mutagenesis. Loss of in vitro strand transfer activity correlated with loss of viral titer in vivo for this cluster of basic amino acids within the HHCC domain.

Assembly and catalysis of concerted two-end integration events by Moloney murine leukemia virus integrase

Retroviral integration results in the stable and coordinated insertion of the two termini of the linear viral DNA into the host genome. An in vitro concerted two-end integration reaction catalyzed by the Moloney murine leukemia virus (M-MuLV) integrase (IN) was used to investigate the binding and coordination of the two viral DNA ends. Comparison of the two-end integration and strand transfer assays indicates that zinc is required for efficient concerted integration utilizing plasmid DNA as target. Complementation assays using a pair of nonoverlapping integrase domains, consisting of the HHCC domain and the core/C-terminal region, yielded products containing the correct 4-base target site duplication. The efficiency of the coordinated two-end integration varied depending on the order of addition of the individual protein and DNA components in the complementation assay. Two-end integration was most efficient when the long terminal repeat (LTR) was premixed with either the target DNA or the HHCC domain. The preference for two-end integration through preincubation of the HHCC finger with the viral DNA supports the role of this domain in the recognition and/or positioning of the LTR.

Paired DNA three-way junctions as scaffolds for assembling integrase complexes

Early steps of retroviral replication involve reverse transcription of the viral RNA genome and integration of the resulting cDNA copy into a chromosome of the host cell. The initial DNA breaking and joining steps of integration are carried out by the virus-encoded integrase enzyme. Integrases bind specifically to the ends of the unintegrated viral cDNA but nonspecifically to target DNA. Conventional assays in vitro reveal primarily the nonspecific DNA binding mode, complicating studies of integrase--DNA complexes. Here, we report an investigation of unconventional DNA structures useful for positioning integrase at predetermined sites. We find that paired DNA three-way junctions can be used to mimic branched DNAs normally formed as reaction intermediates. The three-way junctions differ from authentic intermediates in the connectivity of the DNAs, which, in contrast to the authentic intermediate, allow formation of stable DNA structures under physiological conditions. Assays in vitro showed that integrase can direct hydrolysis at sequences resembling the viral cDNA ends within the three-way junction, but not on junctions with mutant sequences. Changing the spacing between the paired three-way junctions disrupted the cleavage pattern, emphasizing the importance of the correct DNA scaffold. DNase I footprinting studies revealed protection of specific bases at the terminus of the LTR in the three-way junction complex, but not on control linear DNA, specifying the locations of tight interactions between integrase and DNA. Paired DNA three-way junctions are attractive reagents for structural studies of integrase-DNA complexes.

Molecular genetics and target site specificity of retroviral integration

Integration is an essential step in the life cycle of retroviruses, resulting in the stable joining of the viral cDNA to the host cell chromosomes. While this critical process makes retroviruses an attractive vector for gene delivery, it also presents a potential hazard. The sites where integration occurs are nonspecific. Therefore,it is possible that integration of retroviral DNA will affect host gene expression and disrupt normal cellular functions. The mechanism by which integration sites are chosen is not well understood, and is influenced by several factors, including DNA sequence and structure, DNA-binding proteins, DNA methylation, and transcription. Integrase, the viral enzyme responsible for catalyzing integration, also plays a key role in controlling the choice of target sites. The integrase domain responsible for target site selection has been mapped to the central core region. A better understanding of the interaction between the target-specifying motif of integrase and the target DNA may allow a means to manipulate integration into particular chromosomal sites. Another approach to directing integration is to fuse integrase with a sequence-specific DNA-binding protein, which results in a bias of integration in vitro into the recognition site of the fusion partner. Successful incorporation of the fusion protein into infectious virions and the identification of optimal proteins that can be fused to integrase will advance the development of site-specific vectors. Retroviruses are promising for the delivery of genes in experimental and therapeutic protocols. A better understanding of integration will aid in the design of safer and more effective gene transfer vectors.

Integrase-lexA fusion proteins incorporated into human immunodeficiency virus type 1 that contains a catalytically inactive integrase gene are functional to mediate integration

Purified fusion proteins made up of a retroviral integrase and a sequence-specific DNA-binding protein have been tested in in vitro assays for their ability to direct integration into specific target sites. To determine whether these fusion proteins can be incorporated into human immunodeficiency virus type 1 (HIV-1) and are functional to mediate integration, we used an in trans approach to deliver various integrase-LexA proteins to an integrase-defective virus containing an integrase mutation at aspartate residue 64. Integrase-LexA, integrase-LexA DNA-binding domain, or N- or C-terminally truncated integrase-LexA proteins were fused to the HIV-1 accessory protein, Vpr. Coexpression of the Vpr fusion proteins and an integrase-defective HIV-1 molecular clone by a producer cell line resulted in efficient incorporation of the fusion protein into the integrase-mutated virus. In addition, each of these viruses was infectious and capable of performing integration, as determined by two independent cellular assays that measure reporter gene expression. With the exception of the N-terminally truncated integrase fused to LexA, which was at about 1%, all of the fusion proteins restored integration to a similar level, at 17 to 24% of that of the wild-type virus. The low level observed with the N-terminally truncated integrase fused to LexA is consistent with previous results implying that the N terminus of integrase is involved in multiple steps of the retroviral life cycle. These data indicate that the integrase-fusion proteins retain catalytic function in the integrase-mutated viruses and demonstrate the feasibility of incorporating integrase fusion proteins into HIV-1 for the development of site-directed retroviral vectors.

Generation of HIV-1/HIV-2 cross-reactive peptide antisera by small sequence changes in HIV-1 reverse transcriptase and integrase immunizing peptides

We have generated peptide antisera against selected regions in HIV-1 and HIV-2 reverse transcriptase (RT) and integrase (IN) to investigate the specificity of determinants governing the immune response. Peptides representing homologous regions (>50%) in the N- and C-termini and central portions of these proteins were synthesized and injected into rabbits. HIV-1 and HIV-2 IN peptide antisera inhibited IN-mediated cleavage of an HIV-1 DNA oligonucleotide substrate in a 3' processing assay, while anti-RT or normal sera had no effect. None of the RT sera inhibited RT activity. In Western blots, HIV-2 antisera directed against RT or IN peptides recognized HIV-2 RT and IN proteins, respectively, as expected, but also cross-reacted with the corresponding HIV-1 proteins. By contrast, corresponding HIV-1 antisera were type-specific. In some cases, HIV-1 cross-reactive antisera could be generated by immunization with HIV-1 chimeric peptides with as few as two residues in the HIV-1 sequence changed to the corresponding HIV-2 amino acids. The finding that a type-specific response can be converted to a cross-reactive response suggests alternate strategies for developing new diagnostic reagents which detect HIV-1 and HIV-2. In addition, our results provide a general model for generating HIV peptide vaccines with dual specificity against HIV-1 and HIV-2.

Mapping target site selection for the non-specific nuclease activities of retroviral integrase

To identify the parts of retroviral integrase that interact with its DNA substrates, we compared the patterns of target site usage by chimeric enzymes and protein fragments in assays that reveal integrase's non-specific nuclease activities. The central region of 12 chimeric proteins between the human immunodeficiency virus type 1 and visna virus integrases was found to be responsible for selecting non-viral target DNA sites when small alcohols provide the attacking nucleophilic OH group during non-specific alcoholysis assays. Testing deletion derivatives of the integrase protein in this assay, which has similarities to the DNA joining reaction that occurs during retroviral integration, defined a smaller central domain that is sufficient for activity. Thus, this core domain likely contains both the host DNA site and the nucleophile site. Surprisingly, the region of integrase responsible for selecting non-viral target DNA sites when the viral DNA end is the attacking nucleophile could not similarly be mapped with the standard oligonucleotide joining assay. We therefore tested the proteins in a more sensitive assay that displays preferred sites of viral DNA insertion in a plasmid DNA target. All 12 chimeras yielded novel patterns compared with the wild-type enzymes in this assay, although local insertion patterns indicated that the central domain plays an important role in target site selection. Together, these data suggest that other protein regions must be involved when the attacking nucleophilic group is provided by viral DNA. Because specific recognition of viral DNA ends was previously mapped to the central domain, two different regions of integrase must interact with retroviral DNA.

Retroviral DNA integration

DNA integration is a unique enzymatic process shared by all retroviruses and retrotransposons. During integration, double-stranded linear viral DNA is inserted into the host genome in a process catalyzed by the virus-encoded integrase (IN). The mechanism involves a series of nucleophilic attacks, the first of which removes the terminal 2 bases from the 3' ends of the long terminal repeats and of the second which inserts the viral DNA into the host genome. IN specifically recognizes the DNA sequences at the termini of the viral DNA, juxtaposing both ends in an enzyme complex that inserts the viral DNA into a single site in a concerted manner. Small duplications of the host DNA, characteristic of the viral IN, are found at the sites of insertion. At least two host proteins, HMG-I(Y) and BAF, have been shown to increase the efficiency of the integration reaction.

Substrate recognition by retroviral integrases

Substrate recognition by the retroviral IN enzyme is critical for retroviral integration. To catalyze this recombination event, IN must recognize and act on two types of substrates, viral DNA and host DNA, yet the necessary interactions exhibit markedly different degrees of specificity. Although particular sequences at the viral DNA termini are recognized by IN, many host DNA sequences can serve as the target for integration. Over the last decade, both in vitro and in vivo data have contributed to our understanding of how IN recognizes its substrates. This review provides an overview of the sequence and structure requirements for recognition of viral and host DNA by different retroviral INs and discusses recent progress in mapping protein domains involved in these interactions.

Crystal structures of catalytic core domains of retroviral integrases and role of divalent cations in enzymatic activity

Crystal structures of the enzymatically competent catalytic domains of HIV-1 and ASV IN have been solved in the last few years. The structure of HIV-1 IN has been described only for apoenzyme and for a complex with Mg2+, whereas the structure of ASV IN has been presented as the apoenzyme, in the presence of divalent cations (Mn2+, Mg2+, Ca2+, Zn2+, and Cd2+), and with an inhibitor. A single ion of Mn2+, Mg2+, or Ca2+ interacts with the two aspartate side chains of the D,D(35)E catalytic center in octahedral coordination with four water molecules. However, two ions of Zn2+ or Cd2+ bind to the active site of IN with tetrahedral and octahedral coordination, respectively. Only small adjustments take place in the active site of ASV IN on binding of the metal cofactor(s), which are absolutely required for the activity of this enzyme. The placement of the side chains and metal ions in the active site is very similar to that observed even in distant members of this superfamily of polynucleotidyltransferases. Here the role of divalent cations in the enzymatic activity of IN and the search for inhibitors of this enzyme are discussed.

Functional interactions of the HHCC domain of moloney murine leukemia virus integrase revealed by nonoverlapping complementation and zinc-dependent dimerization

The retroviral integrase (IN) is required for the integration of viral DNA into the host genome. The N terminus of IN contains an HHCC zinc finger-like motif, which is conserved among all retroviruses. To study the function of the HHCC domain of Moloney murine leukemia virus IN, the first N-terminal 105 residues were expressed independently. This HHCC domain protein is found to complement a completely nonoverlapping construct lacking the HHCC domain for strand transfer, 3' processing and coordinated disintegration reactions, revealing trans interactions among IN domains. The HHCC domain protein binds zinc at a 1:1 ratio and changes its conformation upon binding to zinc. The presence of zinc within the HHCC domain stimulates selective integration processes. Zinc promotes the dimerization of the HHCC domain and protects it from N-ethylmaleimide modification. These studies dissect and define the requirement for the HHCC domain, the exact function of which remains unknown.

Mutations in nonconserved domains of Ty3 integrase affect multiple stages of the Ty3 life cycle

Ty3, a retroviruslike element of Saccharomyces cerevisiae, transposes into positions immediately upstream of RNA polymerase III-transcribed genes. The Ty3 integrase (IN) protein is required for integration of the replicated, extrachromosomal Ty3 DNA. In retroviral IN, a conserved core region is sufficient for strand transfer activity. In this study, charged-to-alanine scanning mutagenesis was used to investigate the roles of the nonconserved amino- and carboxyl-terminal regions of Ty3 IN. Each of the 20 IN mutants was defective for transposition, but no mutant was grossly defective for capsid maturation. All mutations affecting steady-state levels of mature IN protein resulted in reduced levels of replicated DNA, even when polymerase activity was not grossly defective as measured by exogenous reverse transcriptase activity assay. Thus, IN could contribute to nonpolymerase functions required for DNA production in vivo or to the stability of the DNA product. Several mutations in the carboxyl-terminal domain resulted in relatively low levels of processed 3' ends of the replicated DNA, suggesting that this domain may be important for binding of IN to the long terminal repeat. Another class of mutants produced wild-type amounts of DNA with correctly processed 3' ends. This class could include mutants affected in nuclear entry and target association. Collectively, these mutations demonstrate that in vivo, within the preintegration complex, IN performs a central role in coordinating multiple late stages of the retrotransposition life cycle.

Structure-based mutational analysis of the C-terminal DNA-binding domain of human immunodeficiency virus type 1 integrase: critical residues for protein oligomerization and DNA binding

The C-terminal domain of human immunodeficiency virus type 1 (HIV-1) integrase (IN) is a dimer that binds to DNA in a nonspecific manner. The structure of the minimal region required for DNA binding (IN220-270) has been solved by nuclear magnetic resonance spectroscopy. The overall fold of the C-terminal domain of HIV-1 IN is similar to those of Src homology region 3 domains. Based on the structure of IN220-270, we studied the role of 15 amino acid residues potentially involved in DNA binding and oligomerization by mutational analysis. We found that two amino acid residues, arginine 262 and leucine 234, contribute to DNA binding in the context of IN220-270, as indicated by protein-DNA UV cross-link analysis. We also analyzed mutant proteins representing portions of the full-length IN protein. Amino acid substitution of residues located in the hydrophobic dimer interface, such as L241A and L242A, results in the loss of oligomerization of IN; consequently, the levels of 3' processing, DNA strand transfer, and intramolecular disintegration are strongly reduced. These results suggest that dimerization of the C-terminal domain of IN is important for correct multimerization of IN.

Mutations in the human immunodeficiency virus type 1 integrase D,D(35)E motif do not eliminate provirus formation

The core domain of human immunodeficiency virus type 1 (HIV-1) integrase (IN) contains a D,D(35)E motif, named for the phylogenetically conserved glutamic acid and aspartic acid residues and the invariant 35 amino acid spacing between the second and third acidic residues. Each acidic residue of the D,D(35)E motif is independently essential for the 3'-processing and strand transfer activities of purified HIV-1 IN protein. Using a replication-defective viral genome with a hygromycin selectable marker, we recently reported that a mutation at any of the three residues of the D,D(35)E motif produces a 10(3)- to 10(4)-fold reduction in infectious titer compared with virus encoding wild-type IN (A. D. Leavitt et al., J. Virol. 70:721-728. 1996). The infectious titer, as measured by the number of hygromycin-resistant colonies formed following infection of cells in culture, was less than a few hundred colonies per microg of p24. To understand the mechanism by which the mutant virions conferred hygromycin resistance, we characterized the integrated viral DNA in cells infected with virus encoding mutations at each of the three residues of the D,D(35)E motif. We found the integrated viral DNA to be colinear with the incoming viral genome. DNA sequencing of the junctions between integrated viral DNA and host DNA showed that (i) the characteristic 5-bp direct repeat of host DNA flanking the HIV-1 provirus was not maintained, (ii) integration often produced a deletion of host DNA, (iii) integration sometimes occurred without the viral DNA first undergoing 3'-processing, (iv) integration sites showed a strong bias for a G residue immediately adjacent to the conserved viral CA dinucleotide, and (v) mutations at each of the residues of the D,D(35)E motif produced essentially identical phenotypes. We conclude that mutations at any of the three acidic residues of the conserved D,D(35)E motif so severely impair IN activity that most, if not all, integration events by virus encoding such mutations are not IN mediated. IN-independent provirus formation may have implications for anti-IN therapeutic agents that target the IN active site.

Efficient gap repair catalyzed in vitro by an intrinsic DNA polymerase activity of human immunodeficiency virus type 1 integrase

Cleavage and DNA joining reactions, carried out by human immunodeficiency virus type 1 (HIV-1) integrase, are necessary to effect the covalent insertion of HIV-1 DNA into the host genome. For the integration of HIV-1 DNA into the cellular genome to be completed, short gaps flanking the integrated proviral DNA must be repaired. It has been widely assumed that host cell DNA repair enzymes are involved. Here we report that HIV-1 integrase multimers possess an intrinsic DNA-dependent DNA polymerase activity. The activity was characterized by its dependence on Mg2+, resistance to N-ethylmaleimide, and inhibition by 3'-azido-2',3'-dideoxythymidine-5'-triphosphate, coumermycin A1, and pyridoxal 5'-phosphate. The enzyme efficiently utilized poly(dA)-oligo(dT) or self-annealing oligonucleotides as a template primer but displayed relatively low activity with gapped calf thymus DNA and no activity with poly(dA) or poly(rA)-oligo(dT). A monoclonal antibody binding specifically to an epitope comprised of amino acids 264 to 273 near the C terminus of HIV-1 integrase severely inhibited the DNA polymerase activity. A deletion of 50 amino acids at the C terminus of integrase drastically altered the gel filtration properties of the DNA polymerase, although the level of activity was unaffected by this mutation. The DNA polymerase efficiently extended a hairpin DNA primer up to 19 nucleotides on a T20 DNA template, although addition of the last nucleotide occurred infrequently or not at all. The ability of integrase to repair gaps in DNA was also investigated. We designed a series of gapped molecules containing a single-stranded region flanked by a duplex U5 viral arm on one side and by a duplex nonviral arm on the other side. Molecules varied structurally depending on the size of the gap (one, two, five, or seven nucleotides), their content of T's or C's in the single-stranded region, whether the CA dinucleotide in the viral arm had been replaced with a nonviral sequence, or whether they contained 5' AC dinucleotides as unpaired tails. The results indicated that the integrase DNA polymerase is specifically designed to repair gaps efficiently and completely, regardless of gap size, base composition, or structural features such as the internal CA dinucleotide or unpaired 5'-terminal AC dinucleotides. When the U5 arm of the gapped DNA substrate was removed, leaving a nongapped DNA template-primer, the integrase DNA polymerase failed to repair the last nucleotide in the DNA template effectively. A post-gap repair reaction did depend on the CA dinucleotide. This secondary reaction was highly regulated. Only two nucleotides beyond the gap were synthesized, and these were complementary to and dependent for their synthesis on the CA dinucleotide. We were also able to identify a specific requirement for the C terminus of integrase in the post-gap repair reaction. The results are consistent with a direct role for a heretofore unsuspected DNA polymerase function of HIV-1 integrase in the repair of short gaps flanking proviral DNA integration intermediates that arise during virus infection.

Mapping viral DNA specificity to the central region of integrase by using functional human immunodeficiency virus type 1/visna virus chimeric proteins

We previously described the construction and analysis of the first set of functional chimeric lentivirus integrases, involving exchange of the N-terminal, central, and C-terminal regions of the human immunodeficiency virus type 1 (HIV-1) and visna virus integrase (IN) proteins. Based on those results, additional HIV-1/visna virus chimeric integrases were designed and purified. Each of the chimeric enzymes was functional in at least one oligonucleotide-based IN assay. Of a total of 12 chimeric IN proteins, 3 exhibit specific viral DNA processing, 9 catalyze insertion of viral DNA ends, 12 can reverse that reaction, and 11 are active for nonspecific alcoholysis. Functional data obtained with the processing assay indicate that the central region of the protein is responsible for viral DNA specificity. Target site selection for nonspecific alcoholysis again mapped to the central domain of IN, confirming our previous data indicating that this region can position nonviral DNA for nucleophilic attack. However, the chimeric proteins created patterns of viral DNA insertion distinct from that of either wild-type IN, suggesting that interactions between regions of IN influence target site selection for viral DNA integration. The results support a new model for the functional organization of IN in which viral DNA initially binds nonspecifically to the C-terminal portion of IN but the catalytic central region of the enzyme has a prominent role both in specific recognition of viral DNA ends and in positioning the host DNA for viral DNA integration.

Implication of a central cysteine residue and the HHCC domain of Moloney murine leukemia virus integrase protein in functional multimerization

Moloney murine leukemia virus (M-MuLV) IN-IN protein interactions important for catalysis of strand transfer and unimolecular and bimolecular disintegration reactions were investigated by using a panel of chemically modified M-MuLV IN proteins. Functional complementation of an HHCC-deleted protein (Ndelta105) by an independent HHCC domain (Cdelta232) was severely compromised by NEM modification of either subunit. Productive Ndelta105 IN-DNA interactions with a disintegration substrate lacking a long terminal repeat 5'-single-stranded tail also required complementation by a functional HHCC domain. Virus encoding the C209A M-MuLV IN mutation exhibited delayed virion production and replication kinetics.

Critical contacts between HIV-1 integrase and viral DNA identified by structure-based analysis and photo-crosslinking

Analysis of the crystal structure of HIV-1 integrase reveals a cluster of lysine residues near the active site. Using site-directed mutagenesis and photo-crosslinking we find that Lys156 and Lys159 are critical for the functional interaction of integrase with viral DNA. Mutation of Lys156 or Lys159 to glutamate led to a loss of both 3' processing and strand transfer activities in vitro while maintaining the ability to interact with nonspecific DNA and support disintegration. However, mutation of both residues to glutamate produced a synergistic effect eliminating nearly all nonspecific DNA interaction and disintegration activity. In addition, virus containing either of these changes was replication-defective at the step of integration. Photo-crosslinking, using 5-iododeoxyuracil-substituted oligonucleotides, suggests that Lys159 interacts at the N7 position of the conserved deoxyadenosine adjacent to the scissile phosphodiester bond of viral DNA. Sequence conservation throughout retroviral integrases and certain bacterial transposases (e.g. Tn10/IS10) supports the premise that within those families of polynucleotidyl transferases, these residues are strategic for DNA interaction.

Lack of infectivity of HIV-1 integrase zinc finger-like domain mutant with morphologically normal maturation

The integrase (IN) encoded by human immunodeficiency virus type-1 (HIV-1) is required for integration of the viral DNA into a host cell chromosome. The function of the highly conserved HHCC motif in the HIV-1 IN amino-terminal zinc finger-like domain is still unknown. In this study, we examined the effect of mutations in the HHCC motif on viral infectivity, adsorption to and entry into target cells, and morphology in the context of a full-length form of an HIV-1 molecular clone. A complete lack of infectivity and de novo synthesized viral DNA of the HHCC mutants were demonstrated in both cell-free and co-culture infection systems using MT-2 or HeLa-CD4-LTR-beta-gal as target cells. The levels of viral adsorption to and entry into the target cells were determined by measuring the cell-associated p24 level in target MT-2 cells shortly after infection. We detected comparable cell-associated p24 levels of MT-2 cells after infection with wild-type and the mutant viruses. Taken together, these results suggest that the replication of HIV-1 carrying point mutations in the HHCC motif was blocked at the step after adsorption/ entry and prior to the initiation of reverse transcription, presumably at the uncoating step. Furthermore, electron microscopy revealed that the observed complete lack of viral infectivity caused by introducing an amino acid substitution into the HHCC motif is not always accompanied by apparent abnormal morphology or maturation of virus particles.

In vitro assays for activities of retroviral integrase

Integration of retroviral DNA, an essential step during the retroviral life cycle, is mediated by the viral protein integrase. Simple in vitro assays for measuring integrase activities are described, including catalysis (3'-end processing, 3'-end joining, disintegration), juxtaposition of viral DNA ends, DNA binding, and target site selection. The described assays will be useful in elucidating the molecular mechanism of retroviral integration and screening for integrase inhibitors as potential anti-retroviral drugs.

Characterization of feline immunodeficiency virus integrase and analysis of functional domains

The wild-type and mutant derivatives of the integrase protein of feline immunodeficiency virus (FIV) were cloned and expressed in Escherichia coli. The purified proteins were examined using various model DNA substrates for their catalytic activities: 3'-end processing, 3'-end joining, and disintegration. The reactions required the presence of either Mn2+ or Mg2+ as a divalent cation. The N-terminal and C-subterminal domains (residues 1-52 and 189-235, respectively) were necessary for 3'-end processing and joining reactions but not for disintegration. Substitution of asparagine for the highly conserved aspartic acid at position 118 resulted in a complete loss of all three activities, confirming that the catalytic domain resides in the central core region (residues 53-188) of the protein. Deletion of the C-terminus (residues 236-281) resulted in a FIV integrase mutant that had efficient 3'-end processing and disintegration activities but weak 3'-end joining activity, a finding that has not been reported previously with other retroviral integrases. The result suggests that the C-terminus is the primary binding site for target DNA. Attachment of a histidine-tag at the N-terminus of the wild-type and deletion derivatives increased the binding affinity to the DNA substrate, resulting in altered levels of catalytic activities and selection of integration sites. Similar to other retroviral integrases, certain pairs of mutant derivatives of FIV integrase could complement each other to restitute 3'-end processing and joining activities, suggesting that formation of functional multimers is a general feature of proteins in the integrase family.

Central core domain of retroviral integrase is responsible for target site selection

Integration of retroviral DNA can occur into many sites on target DNA with a wide variation in preference. One factor known to affect target site selection is integrase, the viral protein required for the integration reaction. In this study, assays that measure the distribution and frequency of retroviral DNA integration showed that purified integrases of human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) had different patterns of target site usage. The integrase domain involved in target site selection was mapped by analyzing the integration pattern of chimeric proteins formed between HIV-1 and FIV integrases and of deletion variants of the two wild-type integrases. The results indicate that the domain responsible for target site selection resides in the central core region of integrase.

Reversion of a human immunodeficiency virus type 1 integrase mutant at a second site restores enzyme function and virus infectivity

The integration of a DNA copy of the retroviral RNA genome into the host cell genome is essential for viral replication. The virion-associated integrase protein, encoded by the 3' end of the viral pol gene, is required for integration. Stable virus-producing T-cell lines were established for replication-defective human immunodeficiency virus type 1 carrying single amino acid substitutions at conserved residues in the catalytic domain of integrase. Phenotypically reverted virus was detected 12 weeks after transfection with the integrase mutant carrying the P-109-->S mutation (P109S). Unlike the defective P109S virus, the revertant virus (designated P109SR) grew in CD4+ SupT1 cells. In addition to the Ser substitution at Pro-109, P109SR had a second substitution of Ala for Thr at position 125 in integrase. Site-directed mutagenesis was used to show that the P109S T125A genotype was responsible for the P109SR replication phenotype. The T125A substitution also rescued the in vitro enzyme activities of recombinant P109S integrase protein. P109S integrase did not display detectable 3' processing or DNA strand transfer activity, although 5 to 10% of wild-type disintegration activity was detected. P109S T125A integrase displayed nearly wild-type levels of 3' processing, DNA strand transfer, and disintegration activities, confirming that T125A is a second-site intragenic suppressor of P109S. P109S integrase ran as a large aggregate on a size exclusion column, whereas wild-type integrase ran as a monomer and P109S T125A integrase ran as a mixed population. Pro-109 and Thr-125 are not immediately adjacent in the crystal structure of the integrase catalytic domain. We suggest that the T125A substitution restores integrase function by stabilizing a structural alteration(s) induced by the P109S mutation.

Chemical trapping of ternary complexes of human immunodeficiency virus type 1 integrase, divalent metal, and DNA substrates containing an abasic site. Implications for the role of lysine 136 in DNA binding

We report a novel assay for monitoring the DNA binding of human immunodeficiency virus type 1 (HIV-1) integrase and the effect of cofactors and inhibitors. The assay uses depurinated oligonucleotides that can form a Schiff base between the aldehydic abasic site and a nearby enzyme lysine epsilon-amino group which can subsequently be trapped by reduction with sodium borohydride. Chemically depurinated duplex substrates representing the U5 end of the HIV-1 DNA were initially used. We next substituted an enzymatically generated abasic site for each of 10 nucleotides normally present in a 21-mer duplex oligonucleotide representing the U5 end of the HIV-1 DNA. Using HIV-1, HIV-2, or simian immunodeficiency virus integrases, the amount of covalent enzyme-DNA complex trapped decreased as the abasic site was moved away from the conserved CA dinucleotide. The enzyme-DNA complexes formed in the presence of manganese were not reversed by subsequent addition of EDTA, indicating that the divalent metal required for integrase catalysis is tightly bound in a ternary enzyme-metal-DNA complex. Both the N- and C-terminal domains of integrase contributed to efficient DNA binding, and mutation of Lys-136 significantly reduced Schiff base formation, implicating this residue in viral DNA binding.

Functional domains of Moloney murine leukemia virus integrase defined by mutation and complementation analysis

Retroviral integrases perform two catalytic steps, 3' processing and strand transfer, that result in the stable insertion of the retroviral DNA into the host genome. Mutant M-MuLV integrases were constructed to define the functional domains important for 3' processing, strand transfer, and disintegration by in vitro assays. N-terminal mutants had no detectable 3' processing activity, and only one mutant which lacks the HHCC domain, Ndelta105, had strand transfer activity. Strand transfer mediated by Ndelta105 showed preference for one site in the target DNA. Disintegration activity of N-terminal mutants decreased only minimally. In contrast, all C-terminal mutants truncated by more than 28 amino acids had no integration or disintegration activity. Activity on a single-strand disintegration substrate did not require a functional HHCC domain but did require most of the C-terminal region. Complementation analysis found that the HHCC region alone was able to function in trans to a promoter containing only the DD(35)E and C-terminal regions and to enhance integration site selection. Increasing the reducing conditions or adding the HHCC domain to Ndelta105 reaction mixtures restored the wild-type strand transfer activity and range of target sites. The reducing agent affected Cys-209 in the DD(35)E region. The presence of C-209 was required for complementation of Ndelta105 by the HHCC region.

Human immunodeficiency virus type 1 integrase mutants retain in vitro integrase activity yet fail to integrate viral DNA efficiently during infection

The viral integrase (IN) protein is the only viral protein known to be required for integration of the human immunodeficiency virus type 1 (HIV-1) genome into the host cell DNA, a step in the viral life cycle that is essential for viral replication. To better understand the relationship between in vitro IN activity and IN-mediated integration of viral DNA in an infected cell, we characterized the effects of 13 IN mutations on viral replication in cultured cells. Using HIV-1 genomes that express the hygromycin resistance gene and do not express the HIV-1 env gene, we generated stocks of pseudotype virus coated with the murine leukemia virus amphotropic envelope glycoprotein, containing either wild-type or mutant HIV-1 IN. All mutants produced normal amounts of physical particles, as measured by reverse transcriptase activity and capsid protein (p24) concentration, but they formed three groups based on infectious titer and synthesis of viral DNA. Changes at the three highly conserved acidic residues in the IN core domain (D-64, D-116, and E-152) impair provirus formation without affecting viral DNA synthesis or the accumulation of viral DNA in the nucleus of the infected cell, a phenotype predicted by each mutant's lack of in vitro integrase activity. Mutations at positions N-120, R-199, and W-235 minimally affect in vitro integrase activity, but infectious titers are severely reduced, despite normal synthesis of viral DNA, implying a defect during integration in vivo. Mutations in the zinc binding region (H12C, H16V, and H16C), S81R, and a deletion of residues 32 through 275 yield noninfectious particles that synthesize little or no viral DNA following infection, despite wild-type levels of reverse transcriptase activity and viral RNA in the particles. The two latter classes of mutants suggest that IN can affect DNA synthesis or integration during infection in ways that are not appreciated from currently used assays in vitro.

Mapping domains of retroviral integrase responsible for viral DNA specificity and target site selection by analysis of chimeras between human immunodeficiency virus type 1 and visna virus integrases

Human immunodeficiency virus type 1 (HIV-1) and visna virus integrases were purified from a bacterial expression system and assayed on oligonucleotide substrates derived from each terminus of human immunodeficiency virus type 1 and visna virus linear DNA. Three differences between the proteins were identified, including levels of specific 3'-end processing, patterns of strand transfer, and target site preferences. To map domains of integrase (IN) responsible for viral DNA specificity and target site selection, we constructed and purified chimeric proteins in which the N-terminal, central, and C-terminal regions of these lentiviral integrases were exchanged. All six chimeric proteins were active for disintegration, demonstrating that the active site in the central region of each chimera maintained a functional conformation. Analysis of endonucleolytic processing activity indicated that the N terminus of IN does not contribute to viral DNA specificity; this function must reside in the central region or C terminus of IN. In the viral DNA integration assay, chimeric proteins gave novel patterns of strand transfer products which did not match that of either wild-type IN. Thus, target site selection with a viral DNA terminus as nucleophile could not be mapped to regions of IN defined by these boundaries and may involve interactions between regions. In contrast, when target site preferences were monitored with a new assay in which glycerol stimulates IN-mediated cleavage of nonviral DNA, chimeras clearly segregated between the two wild-type patterns. Target site selection for this nonspecific alcoholysis activity mapped to the central region of IN. This report represents the first detailed description of functional chimeras between any two retroviral integrases.

The DNA-binding domain of HIV-1 integrase has an SH3-like fold

We have determined the solution structure of the DNA-binding domain of HIV-1 integrase by nuclear magnetic resonance spectroscopy. In solution, this carboxyterminal region of integrase forms a homodimer, consisting of two structures that closely resemble Src-homology 3 (SH3) domains. Lys 264, previously identified by mutagenesis studies to be important for DNA binding of the integrase, as well as several adjacent basic amino acids are solvent exposed. The identification of an SH3-like domain in integrase provides a new potential target for drug design.

Activities and substrate specificity of the evolutionarily conserved central domain of retroviral integrase

The retroviral integrase (IN) is a virus-encoded enzyme that is essential for insertion of viral DNA into the host chromosome. In order to map and define the properties of a minimal functional domain for this unique viral enzyme, a series of N- and C-terminal deletions of both Rous sarcoma virus (RSV) and human immunodeficiency virus (HIV) INs were constructed. The RSV IN deletion mutants were first tested for their ability to remove two nucleotides from the end of a substrate representing the terminus of viral DNA in order to assess the contribution of N and C regions towards this reaction, referred to as processing. The results suggest that C-terminal amino acids of the intact RSV protein are required to maintain specificity of the processing reaction. Though deficient for processing, the RSV deletion mutants exhibited a secondary endonucleolytic activity that was indistinguishable from that of wild-type IN, demonstrating that all retained some enzymatic activity. RSV, and a larger set of HIV-1, IN deletion mutants were then tested for their ability to perform an intramolecular, concerted cleavage-ligation reaction using an oligodeoxynucleotide substrate that mimics the intermediate viral-host DNA junction found prior to the final step of covalent closure. The composite results from such analyses define a minimal functional central region of approximately 140 amino acids for each enzyme that includes the highly conserved D,D(35)E domain. Results with HIV-1 and HIV-2 IN also indicate that the efficiency of concerted cleavage-ligation depends upon the presence of CA/GT base pairs within the viral component of the DNA substrate at the reaction site. Even the isolated central region of HIV-1 IN exhibited this sequence requirement for optimal activity. We conclude that this evolutionarily conserved central region of IN not only encodes residues that are required for the catalytic activity of the enzyme but also harbors some or all of the determinants responsible for recognition of the CA/GT dinucleotides that are present at the ends of all retroviral DNAs.