Endotoxins-the invisible companion in biomaterials research

Integrated-omics profiling unveils the disparities of host defense to ECM scaffolds during wound healing in aged individuals

Extracellular matrix (ECM) scaffold membranes have exhibited promising potential to better the outcomes of wound healing by creating a regenerative microenvironment around. However, when compared to the application in younger individuals, the performance of the same scaffold membrane in promoting re-epithelialization and collagen deposition was observed dissatisfying in aged mice. To comprehensively explore the mechanisms underlying this age-related disparity, we conducted the integrated analysis, combing single-cell RNA sequencing (scRNA-Seq) with spatial transcriptomics, and elucidated six functionally and spatially distinctive macrophage groups and lymphocytes surrounding the ECM scaffolds. Through intergroup comparative analysis and cell-cell communication, we characterized the dysfunction of Spp1+ macrophages in aged mice impeded the activation of the type Ⅱ immune response, thus inhibiting the repair ability of epidermal cells and fibroblasts around the ECM scaffolds. These findings contribute to a deeper understanding of biomaterial applications in varied physiological contexts, thereby paving the way for the development of precision-based biomaterials tailored specifically for aged individuals in future therapeutic strategies.

Affinity and Inactivation of Bacterial Endotoxins for Medical Device Materials

Endotoxins are high-molecular-weight complexes that contain lipopolysaccharide, protein, and phospholipid originating from the outer membrane of gram-negative bacteria. As gram-negative bacteria are naturally present in a variety of sources, endotoxins are commonly identified as contaminants in manufacturing environments. In industrial applications, endotoxin often is considered difficult to inactivate and to have a strong affinity with surfaces resulting from its hydrophobic chemical structure. This article describes the investigation of the true affinity of endotoxin, from various microbial sources in solution, for medical device material surfaces. In addition, endotoxin reduction was investigated with commonly used sterilization methods such as those based on ionizing radiation, dry and moist heat, and ethylene oxide sterilization. Endotoxin activity was found to be reduced following exposure to a range of sterilization modalities with the degree of activity reduction related to the source of endotoxin and the substrate material upon which it was present.

Evaluation of decellularization process for developing osteogenic bovine cancellous bone scaffolds in-vitro

Current immunological issues in bone grafting regarding the transfer of xenogeneic donor bone cells into the recipient are challenging the industry to produce safer acellular natural matrices for bone regeneration. The aim of this study was to investigate the efficacy of a novel decellularization technique for producing bovine cancellous bone scaffold and compare its physicochemical, mechanical, and biological characteristics with demineralized cancellous bone scaffold in an in-vitro study. Cancellous bone blocks were harvested from a bovine femoral head (18-24 months old) subjected to physical cleansing and chemical defatting, and further processed in two ways. Group I was subjected to demineralization, while Group II underwent decellularization through physical, chemical, and enzymatic treatments. Both were then freeze-dried, and gamma radiated, finally producing a demineralized bovine cancellous bone (DMB) scaffold and decellularized bovine cancellous bone (DCC) scaffold. Both DMB and DCC scaffolds were subjected to histological evaluation, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), fourier-transform infrared spectroscopy (FTIR), quantification of lipid, collagen, and residual nucleic acid content, and mechanical testing. The osteogenic potential was investigated through the recellularization of scaffolds with human osteoblast cell seeding and examined for cell attachment, proliferation, and mineralization by Alizarin staining and gene expression. DCC produced a complete acellular extracellular matrix (ECM) with the absence of nucleic acid content, wider pores with extensive interconnectivity and partially retaining collagen fibrils. DCC demonstrated a higher cell proliferation rate, upregulation of osteogenic differentiation markers, and substantial mineralized nodules production. Our findings suggest that the decellularization technique produced an acellular DCC scaffold with minimal damage to ECM and possesses osteogenic potential through the mechanisms of osteoconduction, osteoinduction, and osteogenesis in-vitro.

Interplay between biomaterials and the immune system: Challenges and opportunities in regenerative medicine

The use of biomaterials for tissue engineering and regenerative medicine applications has increased dramatically over recent years. However, the clinical uptake of a wide variety of biomaterials remains limited due to adverse effects commonly exhibited by patients, which are caused by the host immune response. Despite this, current in vitro evaluation standards (ISO-10993) for assessing the host response to biomaterials have limitations in predicting the likelihood of in vivo biomaterial acceptance. Furthermore, endotoxin contamination of biomaterials is rarely considered, despite its ability to significantly affect the performance of biomaterials and engineered tissues. This review highlights the importance of the immune response to biomaterials and discusses existing challenges and opportunities in the development and standardised assessment of the immune response to biomaterials, including the importance of endotoxin levels. In addition, the properties of biomaterials that impact the host immune response and the exploitation of immunomodulatory biomaterials in regenerative medicine are explored. Finally, a standardised in vitro pathway of evaluating the immune response to biomaterials (hydrogels) and their regenerative potential is proposed, aiming to ensure safety and consistency, while reducing costs and the use of animals in the biomaterials research for tissue engineering and regenerative medicine. STATEMENT OF SIGNIFICANCE: This review presents a critical analysis of the role of the interactions between the immune system and biomaterials in determining the therapeutic success of biomaterial-based approaches. No such review addressing the lack of understanding of biomaterial-immune system interactions during the developmental and pre-clinical stages of biomaterials, including the impact of the endotoxin levels of biomaterials on the immune response, is published. As there is a lack of in vitro regulations to evaluate the immune response to biomaterials, a standardised in vitro pathway to evaluate the immune response to biomaterials (hydrogels) and their immunomodulatory and regenerative potential for use in tissue engineering/regenerative medicine applications is presented. The aim of the proposed pathway of biomaterial evaluation is to ensure safety and consistency in the biomaterials research community, while reducing costs and animal use (through the concept of the 3R's - reduction, refinement, and replacement of animals).

Dental implant material related changes in molecular signatures in peri-implantitis - A systematic review and integrative analysis of omics in-vitro studies

OBJECTIVE

Since peri-implantitis differs clinically and histopathologically from periodontitis, implant wear debris is considered to play a role in the destructive processes. This work aims to systematically review if titanium particles affect oral-related cells through changes in molecular signatures (e.g., transcriptome, proteome, epigenome), thereby promoting peri-implantitis.

METHODS

Leveraging three literature databases (Medline, Embase, Cochrane) a systematic search based on a priori defined PICOs was conducted: '-omics' studies examining titanium exposure in oral-related cells. After risk of bias assessments, lists of differentially expressed genes, proteins, and results of functional enrichment analyses were compiled. The significance of overlapping genes across multiple studies was assessed via Monte Carlo simulation and their ranking was verified using rank aggregation.

RESULTS

Out of 2104 screened articles we found 12 eligible publications. A significant overlap of gene expression in oral-related cells exposed to titanium particles was found in four studies. Furthermore, changes in biological processes like immune/inflammatory or stress response as well as toll-like receptor (TLR) and mitogen-activated protein kinase (MAPK) signaling pathways were linked to titanium in transcriptome and proteome studies. Epigenetic changes caused by titanium were detected but inconsistent.

CONCLUSION

An influence of titanium implant wear debris on the development and progression of peri-implantitis is plausible but needs to be proven in further studies. Limitations arise from small sample sizes of included studies and insufficient publication of re-analyzable data.

Endotoxin contamination alters macrophage-cancer cell interaction and therapeutic efficacy in pre-clinical 3D in vitro models

The rapid developments in biofabrication, in particular 3D bioprinting, in the recent years have facilitated the need for novel biomaterials that aim to replicate the target tissue in great detail. The presence of endotoxins in these biomaterials is often an overlooked problem. In pre-clinical 3D in vitro models, endotoxins can have significant influence on cell behavior and credibility of the model. In this study we demonstrate the effects of high levels of endotoxins in commercially-available gelatin on the macrophage-cancer cell crosstalk in a 3D bioprinted co-culture model. First, it is demonstrated that, while presenting the same mechanical and structural stimuli, high levels of endotoxin can have significant influence on the metabolic activity of macrophages and cancer cells. Furthermore, this study shows that high endotoxin contamination causes a strong inflammatory reaction in macrophages and significantly inhibits the effects of a paracrine macrophage-cancer cell co-culture. At last, it is demonstrated that the differences in endotoxin levels can drastically alter the efficacy of novel macrophage modulating immunotherapies, AS1517499 and 3-methyladenine. Altogether, this study shows that endotoxin contamination in biomaterials can significantly alter intra- and intercellular communication and thereby drug efficacy, which might lead to misinterpretation of the potency and safety of the tested compounds.

A Novel Method of Endotoxins Removal from Chitosan Hydrogel as a Potential Bioink Component Obtained by CO2 Saturation

The article presents a new approach in the purification of chitosan (CS) hydrogel in order to remove a significant amount of endotoxins without changing its molecular weight and viscosity. Two variants of the method used to purify CS hydrogels from endotoxins were investigated using the PyroGene rFC Enzymatic Cascade assay kit. The effect of the CS purification method was assessed in terms of changes in the dynamic viscosity of its hydrogels, the molecular weight of the polymer, microbiological purity after refrigerated storage and cytotoxicity against L929 cells based on the ISO 10993-5:2009(E) standard. The proposed purification method 1 (M1) allows for the removal of significant amounts of endotoxins: 87.9–97.6% in relation to their initial concentration in the CS hydrogel without affecting the solution viscosity. Moreover, the final solutions were sterile and microbiologically stable during storage. The M1 purification method did not change the morphology of the L929 cells.

Study of the immunologic response of marine-derived collagen and gelatin extracts for tissue engineering applications

The host immunologic response to a specific material is a critical aspect when considering it for clinical implementation. Collagen and gelatin extracted from marine sources have been proposed as biomaterials for tissue engineering applications, but there is a lack of information in the literature about their immunogenicity. In this work, we evaluated the immune response to collagen and/or gelatin from blue shark and codfish, previously extracted and characterized. After endotoxin evaluation, bone marrow-derived macrophages were exposed to the materials and a panel of pro- and anti-inflammatory cytokines were evaluated both for protein quantification and gene expression. Then, the impact of those materials in the host was evaluated through peritoneal injection in C57BL/6 mice. The results suggested shark collagen as the less immunogenic material, inducing low expression of pro-inflammatory cytokines as well as inducible nitric oxide synthase (encoded by Nos2) and high expression of Arginase 1 (encoded by Arg1). Although shark gelatin appeared to be the material with higher pro-inflammatory expression, it also presents a high expression of IL-10 (anti-inflammatory cytokine) and Arginase (both markers for M2-like macrophages). When injected in the peritoneal cavity of mice, our materials demonstrated a transient recruitment of neutrophil, being almost non-existent after 24 hours of injection. Based on these findings, the studied collagenous materials can be considered interesting biomaterial candidates for regenerative medicine as they may induce an activation of the M2-like macrophage population, which is involved in suppressing the inflammatory processes promoting tissue remodeling. STATEMENT OF SIGNIFICANCE: Marine-origin biomaterials are emerging in the biomedical arena, namely the ones based in marine-derived collagen/gelatin proposed as cell templates for tissue regeneration. Nevertheless, although the major cause of implant rejection in clinical practice is the host's negative immune response, there is a lack of information in the literature about the immunological impact of these marine collagenous materials. This work aims to contribute with knowledge about the immunologic response to collagen/gelatin extracted from blue shark and codfish skins. The results demonstrated that despite some differences observed, all the materials can induce a macrophage phenotype related with anti-inflammation resolution and then act as immuno-modulators and anti-inflammatory inducible materials.

Interaction of Lipopolysaccharide-Spiked Blood with Anti-Fouling Polymyxin B-Modified Glass

Bacterial endotoxin, also known as lipopolysaccharide (LPS), plays a major role in the initiation of sepsis, a severe inflammatory condition. Removal of the toxin from blood is one accepted method of patient treatment. Polymyxin B (PMB)-modified columns have been employed successfully for this purpose via extra-corporeal blood-flow systems that incorporate a cartridge for toxin removal. Herein we demonstrate that PMB-modified glass beads are able to reduce the presence of LPS competitively with the equivalent fiber column used in a commercial cartridge. Analysis by gas chromatography-mass spectrometry and ELISA of released fatty acids from the toxin indicates that PMB does not physically capture or significantly remove LPS from the blood samples. In reality, interaction between the surface-bound PMB and the toxin may lead to disaggregation or monomerization of LPS aggregates. As aggregates are the bioactive form of LPS, it is possible that the monomerization of these entities may be the mechanism by which their toxicity is reduced. Moreover, this work indicates that LPS monomers are stabilized subsequent to disaggregation induced by PMB.

Impact of endotoxins on bioengineered tissues and models

Endotoxins are commonly present in both naturally derived and synthetic biomaterials. This Forum highlights the consequences of endotoxin contamination in biomaterials on different engineered tissues, such as bone, skin, or cartilage, and discusses the potential effects on novel 3D immunocompetent pathophysiological models.

The Influence of Bloom Index, Endotoxin Levels and Polyethylene Glycol Succinimidyl Glutarate Crosslinking on the Physicochemical and Biological Properties of Gelatin Biomaterials

In the medical device sector, bloom index and residual endotoxins should be controlled, as they are crucial regulators of the device’s physicochemical and biological properties. It is also imperative to identify a suitable crosslinking method to increase mechanical integrity, without jeopardising cellular functions of gelatin-based devices. Herein, gelatin preparations with variable bloom index and endotoxin levels were used to fabricate non-crosslinked and polyethylene glycol succinimidyl glutarate crosslinked gelatin scaffolds, the physicochemical and biological properties of which were subsequently assessed. Gelatin preparations with low bloom index resulted in hydrogels with significantly (p < 0.05) lower compression stress, elastic modulus and resistance to enzymatic degradation, and significantly higher (p < 0.05) free amine content than gelatin preparations with high bloom index. Gelatin preparations with high endotoxin levels resulted in films that induced significantly (p < 0.05) higher macrophage clusters than gelatin preparations with low endotoxin level. Our data suggest that the bloom index modulates the physicochemical properties, and the endotoxin content regulates the biological response of gelatin biomaterials. Although polyethylene glycol succinimidyl glutarate crosslinking significantly (p < 0.05) increased compression stress, elastic modulus and resistance to enzymatic degradation, and significantly (p < 0.05) decreased free amine content, at the concentration used, it did not provide sufficient structural integrity to support cell culture. Therefore, the quest for the optimal gelatin crosslinker continues.

MS1-type bioengineered spider silk nanoparticles do not exhibit toxicity in an in vivo mouse model

Background: Due to factors such as silk sequence, purification, degradation, morphology and functionalization, each silk variant should be individually tested for potential toxicity. Aim:  In vivo toxicological evaluation of the previously characterized bioengineered H2.1MS1 spider silk particles that can deliver chemotherapeutics to human epidermal growth factor receptor 2-positive breast cancer. Materials & methods: Silk nanoparticles (H2.1MS1 and control MS1) were administered intravenously to mice, and then the organismal response was assessed. Several parameters of acute and subchronic toxicity were analyzed, including animal mortality and behavior, nanosphere biodistribution, and histopathological analysis of internal organs. Also, the complete blood count, as well as the concentration of biochemical parameters and cytokines in the serum, were examined. Results & conclusion: No toxicity of the systemically administrated silk nanosphere was observed, indicating their potential application in biomedicine.

Gold nanoparticles (AuNPs) impair LPS-driven immune responses by promoting a tolerogenic-like dendritic cell phenotype with altered endosomal structures

Dendritic cells (DCs) shape immune responses by influencing T-cell activation. Thus, they are considered both an interesting model for studying nano-immune interactions and a promising target for nano-based biomedical applications. However, the accentuated ability of nanoparticles (NPs) to interact with biomolecules may have an impact on DC function that poses an unexpected risk of unbalanced immune reactions. Here, we investigated the potential effects of gold nanoparticles (AuNPs) on DC function and the consequences for effector and memory T-cell responses in the presence of the microbial inflammatory stimulus lipopolysaccharide (LPS). Overall, we found that, in the absence of LPS, none of the tested NPs induced a DC response. However, whereas 4-, 8-, and 11 nm AuNPs did not modulate LPS-dependent immune responses, 26 nm AuNPs shifted the phenotype of LPS-activated DCs toward a tolerogenic state, characterized by downregulation of CD86, IL-12 and IL-27, upregulation of ILT3, and induction of class E compartments. Moreover, this DC phenotype was less proficient in promoting Th1 activation and central memory T-cell proliferation. Taken together, these findings support the perception that AuNPs are safe under homeostatic conditions; however, particular care should be taken in patients experiencing a current infection or disorders of the immune system.

Esthetic elastomeric ligatures: Quantification of bacterial endotoxin in vitro and in vivo

INTRODUCTION

The objective of this study was to evaluate in vitro and in vivo bacterial endotoxin (LPS) adhesion in polyurethane and silicone esthetic elastomeric orthodontic ligatures. The null hypotheses tested were: (1) there is no LPS adhesion in esthetic elastomeric orthodontic ligatures; and (2) there is no difference in the LPS adhesion between different brands of these ligatures.

METHODS

For the in vitro study, 4 types of esthetic elastomeric ligatures were used (Sani-Ties and Sili-Ties [Dentsply GAC, Islandia, NY;] and Mini Single Case Ligature Stick and Synergy low-friction ligatures [Rocky Mountain Orthodontics, Denver, Colo]), contaminated or not with endotoxin solution. Replicas of twisted wire and cast stainless steel ligatures were used as control. For the in vivo study, 10 male and 10 female patients, aged 15-30 years, received the same 4 types of ligatures, 1 of each inserted in the maxillary and mandibular canines, randomly. Twenty-one days later, the ligatures were removed, and endotoxin quantification was performed using the Limulus amebocyte lysate test. Data were analyzed (α = 0.05) using the Kruskal-Wallis test and Dunn's posttest or analysis of variance and Tukey's posttest.

RESULTS

GAC silicone group had the lowest median contamination (1.15 endotoxin units/mL; P <0.0001) in vitro. In the in vivo study, the GAC silicone group had the lowest mean contamination (0.577 endotoxin units/mL; P <0.001). In both studies, the other groups did not present a significant difference when compared with each other (P >0.05).

CONCLUSIONS

LPS exhibited an affinity for all the tested polyurethane and silicone elastomeric ligatures. GAC silicone ligatures presented with lower amounts of LPS attached to their surfaces. Thus, both null hypotheses were rejected.

Alginate hydrogel polymers enable efficient delivery of a vascular-targeted AAV vector into aortic tissue

Gene therapeutic approaches to aortic diseases require efficient vectors and delivery systems for transduction of endothelial cells (ECs) and smooth muscle cells (SMCs). Here, we developed a novel strategy to efficiently deliver a previously described vascular-specific adeno-associated viral (AAV) vector to the abdominal aorta by application of alginate hydrogels. To efficiently transduce ECs and SMCs, we used AAV9 vectors with a modified capsid (AAV9SLR) encoding enhanced green fluorescent protein (EGFP), as wild-type AAV vectors do not transduce ECs and SMCs well. AAV9SLR vectors were embedded into a solution containing sodium alginate and polymerized into hydrogels. Gels were surgically implanted around the adventitia of the infrarenal abdominal aorta of adult mice. Three weeks after surgery, an almost complete transduction of both the endothelium and tunica media adjacent to the gel was demonstrated in tissue sections. Hydrogel-mediated delivery resulted in induction of neutralizing antibodies but did not cause inflammatory responses in serum or the aortic wall. To further determine the translational potential, aortic tissue from patients was embedded ex vivo into AAV9SLR-containing hydrogel, and efficient transduction could be confirmed. These findings demonstrate that alginate hydrogel harboring a vascular-targeting AAV9SLR vector allows efficient local transduction of the aortic wall.

Biomaterials-Mediated Regulation of Macrophage Cell Fate

Endogenous regeneration aims to rebuild and reinstate tissue function through enlisting natural self-repairing processes. Promoting endogenous regeneration by reducing tissue-damaging inflammatory responses while reinforcing self-resolving inflammatory processes is gaining popularity. In this approach, the immune system is recruited as the principal player to deposit a pro-reparative matrix and secrete pro-regenerative cytokines and growth factors. The natural wound healing cascade involves many immune system players (neutrophils, macrophages, T cells, B cells, etc.) that are likely to play important and indispensable roles in endogenous regeneration. These cells support both the innate and adaptive arms of the immune system and collectively orchestrate host responses to tissue damage. As the early responders during the innate immune response, macrophages have been studied for decades in the context of inflammatory and foreign body responses and were often considered a cell type to be avoided. The view on macrophages has evolved and it is now understood that macrophages should be directly engaged, and their phenotype modulated, to guide the timely transition of the immune response and reparative environment. One way to achieve this is to design immunomodulating biomaterials that can be placed where endogenous regeneration is desired and actively direct macrophage polarization. Upon encountering these biomaterials, macrophages are trained to perform more pro-regenerative roles and generate the appropriate environment for later stages of regeneration since they bridge the innate immune response and the adaptive immune response. This new design paradigm necessitates the understanding of how material design elicits differential macrophage phenotype activation. This review is focused on the macrophage-material interaction and how to engineer biomaterials to steer macrophage phenotypes for better tissue regeneration.

Bioengineered elastin- and silk-biomaterials for drug and gene delivery

Advances in medical science have led to diverse new therapeutic modalities, as well as enhanced understanding of the progression of various disease states. These findings facilitate the design and development of more customized and exquisite drug delivery systems that aim to improve therapeutic indices of drugs to treat a variety of conditions. Synthetic polymer-based drug carriers have often been the focus of such research. However, these structures suffer from challenges with heterogeneity of the starting material, limited chemical features, complex functionalization methods, and in some cases a lack of biocompatibility. Consequently, protein-based polymers have garnered much attention in recent years due to their monodisperse features, ease of production and functionalization, and biocompatibility. Genetic engineering techniques enable the advancement of protein-based drug delivery systems with finely tuned physicochemical properties, and thus an expanded level of customization unavailable with synthetic polymers. Of these genetically engineered proteins, elastin-like proteins (ELP), silk-like proteins (SLP), and silk-elastin-like proteins (SELP) provide a unique set of alternatives for designing drug delivery systems due to their inherent chemical and physical properties and ease of engineering afforded by recombinant DNA technologies. In this review we examine the advantages of genetically engineered drug delivery systems with emphasis on ELP and SLP constructions. Methods for fabrication and relevant biomedical applications will also be discussed.

When Would Immunologists Consider a Nanomaterial to be Safe? Recommendations for Planning Studies on Nanosafety

The immune system is professional in recognizing and responding to non-self, including nanomaterials. Immune responses by professional and nonprofessional immune cells are thus nearly inevitable upon exposure of cells and organisms to such materials. The state of research into taking the immune system into account in nanosafety studies is reviewed and three aspects in which further improvements are desirable are identified: 1) Due to technical limitations, more stringent testing for endotoxin contamination should be made. 2) Since under overdose conditions immunity shows unphysiological responses, all doses used should be justified by being equivalent to tissue-delivered doses. 3) When markers of acute inflammation or cell stress are observed, functional assays are necessary to distinguish between homeostatic fluctuation and genuine defensive or tolerogenic responses. Since immune activation can also indicate that the immune system considers a stimulus to be harmless and induces tolerance, activation markers by themselves do not necessarily imply a danger to the body. Guidelines such as these are necessary to approach the point where specific nanomaterials are classified as safe based on reliable testing strategies.

Material stiffness influences the polarization state, function and migration mode of macrophages

Biomaterial implantation is followed by an inflammatory cascade dominated by macrophages, which determine implant acceptance or rejection through pro- and anti-inflammatory polarization states (Anderson et al., 2008; Brown and Badylak, 2013). It is known that chemical signals such as bacterial endotoxins and cytokines (IL4) can direct macrophage polarization (Mantovani et al., 2004); however, recent evidence implicates biophysical cues in this process (McWhorter et al., 2015; Patel et al., 2012). Here we report that THP-1 derived macrophages cultured on collagen-coated polyacrylamide gels of varying stiffness adapt their polarization state, functional roles and migration mode according to the stiffness of the underlying substrate. Through gene expression and protein secretion analysis, we show that stiff polyacrylamide gels (323 kPa) prime macrophages towards a pro-inflammatory phenotype with impaired phagocytosis in macrophages, while soft (11 kPa) and medium (88 kPa) stiffness gels prime cells towards an anti-inflammatory, highly phagocytic phenotype. Furthermore, we show that stiffness dictates the migration mode of macrophages; on soft and medium stiffness gels, cells display Rho-A kinase (ROCK)-dependent, podosome-independent fast amoeboid migration and on stiff gels they adopt a ROCK-independent, podosome-dependent slow mesenchymal migration mode. We also provide a mechanistic insight into this process by showing that the anti-inflammatory property of macrophages on soft and medium gels is ROCK-dependent and independent of the ligand presented to them. Together, our results demonstrate that macrophages adapt their polarization, function and migration mode in response to the stiffness of the underlying substrate and suggest that biomaterial stiffness is capable of directing macrophage behaviour independent of the biochemical cues being presented to them. The results from this study establish an important role for substrate stiffness in directing macrophage behaviour, and will lead to the design of immuno-informed biomaterials that are capable of modulating the macrophage response after implantation. STATEMENT OF SIGNIFICANCE: Biomaterial implantation is followed by an inflammatory cascade dominated by macrophages, which determine implant acceptance or rejection through pro- and anti-inflammatory polarization states. It is known that chemical signals can direct macrophage polarization; however, recent evidence implicates biophysical cues in this process. Here we report that macrophages cultured on gels of varying stiffness adapt their polarization state, functional roles and migration mode according to the stiffness of the underlying substrate. The results from this study establish an important role for substrate stiffness in directing macrophage behaviour, and will lead to the design of immuno-informed biomaterials that are capable of modulating the macrophage response after implantation.

Anti-inflammatory and antimicrobial activity of bioactive hydroxyapatite/silver nanocomposites

Biomaterials are often used in orthopedic surgery like cavity fillings. However, related complications often require long-term systemic antibiotics, device removal, and extended rehabilitation. Hydroxyapatite/silver (HA/Ag) composites have been proposed as implantation biomaterials owing to the osteogenic properties of hydroxyapatite and to the antimicrobial efficiency of silver. Nevertheless, higher silver concentrations induce cytotoxic effects. The aim of this study was to synthesize and characterize HA/Ag nanocomposites that will allow us to use lower concentrations of silver nanoparticles with better antimicrobial efficiency and anti-inflammatory properties. The characterization of HA/Ag was performed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, and laser diffraction. Bioactivity was evaluated under a simulated body fluid. The viability of osteoblast like-cells (MG-63) was determined by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) and the antimicrobial activity was evaluated by the standard McFarland method. The detection of nitric oxide was measured by a colorimetric assay and the inflammatory cytokines by flow cytometry. We obtained particulate composites of calcium phosphates identified as hydroxyapatite and silver nanoparticles. The bioactivity of the HA/Ag nanocomposites on SFB was confirmed by apatite formations. The viability of MG-63 cells was not affected. We also found antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans owing to the presence of silver nanoparticles at non-cytotoxic concentrations. HA/Ag reduced the release of nitric oxide and decreased the secretion of IL-1 and TNF-α in cells stimulated with Lipopolysaccharide (LPS). In conclusion, the inflammatory and antimicrobial capacity of the HA/Ag nanocomposites, as well as its bioactivity and low cytotoxicity make it a candidate as an implantation biomaterial for bone tissues engineering and clinical practices in orthopedic, oral and maxillofacial surgery.

Effect of gelatin source and photoinitiator type on chondrocyte redifferentiation in gelatin methacryloyl-based tissue-engineered cartilage constructs

This work investigates neocartilage formation in bovine and porcine gelatin methacryloyl-based hydrogels photocrosslinked using ultraviolet or visible light photoinitiator systems.

Wear Particle-induced Priming of the NLRP3 Inflammasome Depends on Adherent Pathogen-associated Molecular Patterns and Their Cognate Toll-like Receptors: An In Vitro Study

BACKGROUND

Orthopaedic wear particles activate the NLRP3 inflammasome to produce active interleukin 1β (IL1β). However, the NLRP3 inflammasome must be primed before it can be activated, and it is unknown whether wear particles induce priming. Toll-like receptors (TLRs) are thought to mediate particle bioactivity. It remains controversial whether pathogen-associated molecular patterns (PAMPs) and/or alarmins are responsible for TLR activation by wear particles.

QUESTIONS/PURPOSES

(1) Does priming of the NLRP3 inflammasome by wear particles depend on adherent PAMPs? (2) Does priming of the NLRP3 inflammasome by wear particles depend on TLRs and TIRAP/Mal? (3) Does priming of the NLRP3 inflammasome by wear particles depend on cognate TLRs? (4) Does activation of the NLRP3 inflammasome by wear particles depend on adherent PAMPs?

METHODS

Immortalized murine macrophages were stimulated by as-received titanium particles with adherent bacterial debris, endotoxin-free titanium particles, or titanium particles with adherent ultrapure lipopolysaccharide. To study priming, NLRP3 and IL1β mRNA and IL1β protein levels were assessed in wild-type, TLR4, TLR2, and TIRAP/Mal macrophages. To study activation, IL1β protein secretion was assessed in wild-type macrophages preprimed with ultrapure lipopolysaccharide.

RESULTS

Compared with titanium particles with adherent bacterial debris, endotoxin-free titanium particles induced 86% less NLRP3 mRNA (0.05 ± 0.03 versus 0.35 ± 0.01 NLRP3/GAPDH, p < 0.001) and 91% less IL1β mRNA (0.02 ± 0.01 versus 0.22 ± 0.03 IL1β/GAPDH, p < 0.001). ProIL1β protein level was robustly increased in wild-type macrophages stimulated by particles with adherent PAMPs but was not detectably produced in macrophages stimulated by endotoxin-free particles. Adherence of ultrapure lipopolysaccharide to endotoxin-free particles reconstituted stimulation of NLRP3 and IL1β mRNA. Particles with adherent bacterial debris induced 79% less NLRP3 mRNA (0.09 ± 0.004 versus 0.43 ± 0.13 NLRP3/GAPDH, p < 0.001) and 40% less IL1β mRNA (0.09 ± 0.04 versus 0.15 ± 0.03 IL1β/GAPDH, p = 0.005) in TLR4 macrophages than in wild-type. Similarly, those particles induced 49% less NLRP3 mRNA (0.22 ± 0.10 versus 0.43 ± 0.13 NLRP3/GAPDH, p = 0.004) and 47% less IL1β mRNA (0.08 ± 0.02 versus 0.15 ± 0.03 IL1β/GAPDH, p = 0.012) in TIRAP/Mal macrophages than in wild-type. Particles with adherent ultrapure lipopolysaccharide induced 96% less NLRP3 mRNA (0.012 ± 0.001 versus 0.27 ± 0.05 NLRP3/GAPDH, p = 0.003) and 91% less IL1β mRNA (0.03 ± 0.01 versus 0.34 ± 0.07 IL1β/GAPDH, p < 0.001) expression in TLR4 macrophages than in wild-type. In contrast, those particles did not induce less NLRP3 and IL1β mRNA in TLR2 macrophages. IL1β protein secretion was equivalently induced by particles with adherent bacterial debris or by endotoxin-free particles in a time-dependent manner in wild-type macrophages. For example, particles with adherent bacterial debris induced 99% ± 2% of maximal IL1β secretion after 12 hours, whereas endotoxin-free particles induced 92% ± 11% (p > 0.5).

CONCLUSIONS

This cell culture study showed that adherent PAMPs are required for priming of the NLRP3 inflammasome by wear particles and this process is dependent on their cognate TLRs and TIRAP/Mal. In contrast, activation of the NLRP3 inflammasome by titanium particles is not dependent on adherent PAMPs. Animal and implant retrieval studies are needed to determine whether wear particles have similar effects on the NLRP3 inflammasome in vivo.

CLINICAL RELEVANCE

Our findings, together with recent findings that aseptic loosening associates with polymorphisms in the TIRAP/Mal locus, support that adherent PAMPs may contribute to aseptic loosening in patients undergoing arthroplasty.

Adhesion and differentiation behaviors of mesenchymal stem cells on titanium with micrometer and nanometer-scale grid patterns produced by femtosecond laser irradiation

To clarify the effects of grid topographies with different scales on cell morphology and functionalization, we investigated the adhesion and differentiation of human mesenchymal stem cells (hMSCs) to titanium surfaces with micron, nano, and micron/nano (hybrid) grid topographies created by femtosecond laser irradiation. The results showed that cellular adhesion and differentiation strongly depended on the scales of the grid topography. hMSCs cultured on micron and hybrid grid topographies showed regulation of cellular adhesion plaques following the surface topography and were vinculin-positive, whereas filamentous vinculin was evident at the filopodia of hMSCs cultured on nanogrids. The findings indicate that the micron grid topography was beneficial for cell colonization by anchoring the cells to the substrate surface, whereas the nanogrid topography was beneficial for cell locomotion. With the superposition effect of the micron and nanogrids, micro/nanohybrid grid topography strongly promoted cell adhesion. This differential adhesion induced differences cell differentiation. Nanogrids promoted differentiation of hMSCs, particularly osteogenic differentiation. These findings provide a basis for the design of novel biomaterial surfaces that can regulate specific cellular functions. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2735-2743, 2018.

Photocrosslinked Dextran-Based Hydrogels as Carrier System for the Cells and Cytokines Induce Bone Regeneration in Critical Size Defects in Mice

Modified biomaterials have for years been the focus of research into establishing new bone substitutes. In our preceding in vitro study employing different cell cultures, we developed chemically and mechanically characterized hydrogels based on photocrosslinkable dextran derivatives and demonstrated their cytocompatibility and their beneficial effects on the proliferation of osteoblasts and endothelial cells. In the present in vivo study, we investigate photocrosslinked dextran-based hydrogels in critical size defects in mice to evaluate their potential as carrier systems for cells or for a specific angiogenesis enhancing cytokine to induce bone formation. We could demonstrate that, with optimized laboratory practice, the endotoxin content of hydrogels could be reduced below the Food and Drug Administration (FDA)-limit. Dextran-based hydrogels were either loaded with a monoculture of endothelial cells or a co-culture of human osteoblasts with endothelial cells, or with stromal-derived-growth factor (SDF-1). Scaffolds were implanted into a calvarial defect of critical size in mice and their impact on bone formation was assessed by µCt-analyses, histology and immunohistology. Our study demonstrates that promotion of angiogenesis either by SDF-1 or a monoculture of endothelial cells induces bone regeneration at a physiological level. These in vivo results indicate the potential of dextran-based hydrogel composites in bone regeneration to deliver cells and cytokines to the defect site.

Successful and failed mini-implants: microbiological evaluation and quantification of bacterial endotoxin

Objectives

Using two groups of mini-implants (successful and failed) the objectives of this in vivo study were: to evaluate the microbial contamination by the checkerboard DNA-DNA hybridization technique and to quantify the bacterial endotoxin by the limulus amebocyte lysate assay.

Material and Methods

The 15 successful and 10 failed mini-implants (1.6 mm diameter × 7.0 or 9.0 mm long), placed in the maxilla and/or mandible, were obtained from 15 patients undergoing orthodontic treatment. Data were analyzed statistically by the Wilcoxon rank-sum test using the SAS software (a=0.05).

Results

All 40 microbial species were detected in both groups of mini-implants, with different frequencies. No differences were observed between the groups with respect to microbial complexes (blue, purple, yellow, green, orange, red and other species) and endotoxin quantification (p>0.05).

Conclusion

Neither microbial contamination nor endotoxin quantification was determinant for the early loss of stability of the mini-implants.

Structural characterization of bioactive heteropolysaccharides from the medicinal fungus Inonotus obliquus (Chaga)

The aim of this paper was to perform a comprehensive characterization of polysaccharides isolated from the interior (IOI) and exterior (IOE) parts of the fungus Inonotus obliquus. Pre-extraction with DCM and MeOH, followed by water and alkali extraction and ethanol precipitation gave two water extracts and two alkali extracts. Neutral and acidic polysaccharide fractions were obtained after anion-exchange chromatography of the water extracts. The neutral polysaccharides (60-73 kDa) were heterogeneous and branched and consisted of a (1 → 3)-linked β-Glc backbone with (1 → 6)-linked kinks in the chain at approximately every fifth residue, with branches of (1 → 6)-linked β-Glc in addition to substantial amounts of (1 → 6)-linked α-Gal with 3-O-methylation at about every third Gal residue. The acidic polysaccharide fractions (10-31 kDa) showed similar structural motifs as the neutral fractions differing mainly by the presence of (1 → 4)-linked α-GalA and α-GlcA. β-Xyl, α-Man and α-Rha were also present in varying amounts in all fractions. No major structural differences between the IOI and IOE fractions were observed. An alkaline polysaccharide fraction (>450 kDa) was obtained from the IOI alkali extract, and consisted mainly of (1 → 3)- and (1 → 6)-linked β-Glc and (1 → 4)-linked β-Xyl. Several of the fractions showed in vitro immunomodulatory effect by increasing NO production in the murine macrophage and dendritic cell lines J774.A1 and D2SC/1. Most fractions managed to increase NO production only at the highest concentration tested (100 μg/ml), while the neutral fraction IOE-WN activated potent NO production at 10 μg/ml and was considered the most promising immunomodulating fraction in this study.

A New Bone Substitute Developed from 3D-Prints of Polylactide (PLA) Loaded with Collagen I: An In Vitro Study

Although a lot of research has been performed, large segmental bone defects caused by trauma, infection, bone tumors or revision surgeries still represent big challenges for trauma surgeons. New and innovative bone substitutes are needed. Three-dimensional (3D) printing is a novel procedure to create 3D porous scaffolds that can be used for bone tissue engineering. In the present study, solid discs as well as porous cage-like 3D prints made of polylactide (PLA) are coated or filled with collagen, respectively, and tested for biocompatibility and endotoxin contamination. Microscopic analyses as well as proliferation assays were performed using various cell types on PLA discs. Stromal-derived factor (SDF-1) release from cages filled with collagen was analyzed and the effect on endothelial cells tested. This study confirms the biocompatibility of PLA and demonstrates an endotoxin contamination clearly below the FDA (Food and Drug Administration) limit. Cells of various cell types (osteoblasts, osteoblast-like cells, fibroblasts and endothelial cells) grow, spread and proliferate on PLA-printed discs. PLA cages loaded with SDF-1 collagen display a steady SDF-1 release, support cell growth of endothelial cells and induce neo-vessel formation. These results demonstrate the potential for PLA scaffolds printed with an inexpensive desktop printer in medical applications, for example, in bone tissue engineering.

Bacterial endotoxin adhesion to different types of orthodontic adhesives

Objective

The aim of this study was to assess whether LPS adheres to orthodontic adhesive systems, comparing two commercial brands.

Material and Methods

Forty specimens were fabricated from Transbond XT and Light Bond composite and bonding agent components (n=10/component), then contaminated by immersion in a bacterial endotoxin solution. Contaminated and non-contaminated acrylic resin samples were used as positive and negative control groups, respectively. LPS quantification was performed by the Limulus Amebocyte Lysate QCL-1000™ test. Data obtained were scored and subjected to the Chi-square test using a significance level of 5%.

Results

There was endotoxin adhesion to all materials (p<0.05). No statistically significant difference was found between composites/bonding agents and acrylic resin (p>0.05). There was no significant difference (p>0.05) among commercial brands. Affinity of endotoxin was significantly greater for the bonding agents (p=0.0025).

Conclusions

LPS adhered to both orthodontic adhesive systems. Regardless of the brand, the endotoxin had higher affinity for the bonding agents than for the composites. There is no previous study assessing the affinity of LPS for orthodontic adhesive systems. This study revealed that LPS adheres to orthodontic adhesive systems. Therefore, additional care is recommended to orthodontic applications of these materials.

Stability and bioactivity of chitosan as a transfection agent in primary human cell cultures: A case for chitosan-only controls

Chitosan polymers (Cs), from which microparticles (CsM) may be precipitated to deliver various intracellular payloads, are generally considered biologically inert. We examined the impact of cell culture conditions on CsM size and the effect of chitosan on CD59 expression in primary human smooth muscle cells. We found that particle concentration and incubation time in biological buffers augmented particle size. Between pH 7.0 and pH 7.5, CsM size increased abruptly. We utilized CsM containing a plasmid with a gene for CD59 (pCsM) to transfect cells. Both CD59 mRNA and the number of CD59-positive cells were increased after pCsM treatment. Unexpectedly, CsM also augmented the number of CD59-positive cells. Cs alone enhanced CD59 expression more potently than either pCSM or CsM. This observation strongly suggests that chitosan is in fact bioactive and that chitosan-only controls should be included to avoid misattributing the activity of the delivery agent with that of the payload.

Recovery of Surgical Equipment Sterile Processing During a Floodwater Boil Advisory

Excessive rainfall and dam failures resulted in floodwater contaminating our public water supply. The endotoxin risk in the contaminated water created challenges in recovery of sterile processing for our surgical equipment. Recovery plans should include a potable water source and a method to connect it to the required location. We share our solution of plumbing our sterile processing equipment to tanker-transported potable water sources. (Disaster Med Public Health Preparedness. 2018; 12: 415-418).

The shape and size of hydroxyapatite particles dictate inflammatory responses following implantation

The extent of regeneration following biomaterial implantation is dependent on the microenvironment surrounding the implant. Since implant composition can have a profound effect on inflammation, it is essential to understand this process as a non-resolving inflammatory response can lead to fibrous encapsulation and insufficient integration. Incorporation of particulates into implants confers structural and functional benefits, thus optimizing particulate characteristics to enhance immune mediated efficacy is important. We investigated the relationship between the nature of hydroxyapatite (HA) particles and the innate immune response, focusing on how particle size (0.1 µm, 5 µm, 20 µm, 100 µm) and morphology (needle-shaped/spherical; smooth/rough surface) modulates inflammatory responses. We observed a shape and size-dependent activation of the NLRP3 inflammasome and IL-1β secretion; while needle-shaped and smaller HA particles significantly enhanced cytokine secretion, larger particles did not. Moreover, HA particle characteristics profoundly influenced patterns of innate immune cell recruitment and cytokine production following injection. While small, needle-shaped particles induced a strong inflammatory response, this was not observed with smooth, spherical particles of comparable size or with larger particles. These findings indicate that hydroxyapatite particle characteristics dictate immune cell recruitment and the ensuing inflammatory response, providing an opportunity to tailor HA particle characteristics to regulate immune responses induced after biomaterial implantation.

Emperor's new clothes: Is particle disease really infected particle disease?

Aseptic loosening remains the most significant long-term complication of total hip replacement. The current paradigm points to an inflammatory response to wear particles as its main trigger. Recently, there have been increasing numbers of positive bacterial isolates reported among patients with clinically absent infection. This paper reviews existing evidence on possible involvement of bacteria and microbial-associated molecular patterns in the pathology of so-called "aseptic loosening." © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1497-1504, 2016.

Endotoxins in surgical instruments of hip arthroplasty

Abstract OBJECTIVE To investigate endotoxins in sterilized surgical instruments used in hip arthroplasties. METHOD A descriptive exploratory study conducted in a public teaching hospital. Six types of surgical instruments were selected, namely: acetabulum rasp, femoral rasp, femoral head remover, chisel box, flexible bone reamer and femoral head test. The selection was based on the analysis of the difficulty in removing bone and blood residues during cleaning. The sample was made up of 60 surgical instruments, which were tested for endotoxins in three different stages. The EndosafeTM Gel-Clot LAL (Limulus Amebocyte Lysate method) was used. RESULT There was consistent gel formation with positive analysis in eight instruments, corresponding to 13.3%, being four femoral rasps and four bone reamers. CONCLUSION Endotoxins in quantity ≥0.125 UE/mL were detected in 13.3% of the instruments tested.

The influence of calcitonin gene-related peptide on markers of bone metabolism in MG-63 osteoblast-like cells co-cultured with THP-1 macrophage-like cells under virtually osteolytic conditions

Background

The neuropeptide calcitonin gene-related peptide (CGRP) has been described to have an inhibitory effect on endotoxin- and wear particle-induced inflammation in the early stages of periprosthetic osteolysis. In the present study, the crosstalk between immune cells and osteoblasts in osteolytic conditions treated with CGRP has been analyzed to evaluate whether the anti-inflammatory properties of the peptide also have a beneficial, i.e. an anti-resorptive and osteo-anabolic impact on bone metabolism.

Methods

MG-63 osteoblast-like cells were co-cultured with THP-1 macrophage-like cells stimulated with either ultra-high molecular weight polyethylene (UHMWPE) particles or different concentrations of bacterial lipopolysaccharides (LPS) and simultaneously treated with CGRP. Inflammation was monitored in terms of measuring the levels of tumor necrosis factor (TNF)-α secretion. Furthermore, the production of the osteoblast markers osteoprotegerin (OPG), receptor activator of nuclear factor κB ligand (RANKL), alkaline phosphatase (ALP) and osteopontin (OPN) was quantified. Also, ALP enzymatic activity was measured.

Results

Stimulation of co-cultured THP-1 macrophages with either high levels of LPS or UHMWPE induced the secretion of TNF-α which could be inhibited by CGRP to a great extent. However, no remarkable changes in the OPG/RANKL ratio or bone ALP activity were observed. Interestingly, OPN was exclusively produced by THP-1 cells, thus acting as a marker of inflammation. In addition, TNF-α production in THP-1 single cell cultures was found to be considerably higher than in co-cultured cells.

Conclusions

In the co-culture system used in the present study, no obvious relation between inflammation, its mitigation by CGRP, and the modulation of bone metabolism became evident. Nonetheless, the results suggest that during the onset of periprosthetic osteolysis the focus might lie on the modulation of inflammatory reactions. Possibly, implant-related inflammation might merely have an impact on osteoclast differentiation rather than on the regulation of osteoblast activity.

Electronic supplementary material

The online version of this article (doi:10.1186/s12891-016-1044-5) contains supplementary material, which is available to authorized users.

Alexidine Dihydrochloride Attenuates Osteoclast Formation and Bone Resorption and Protects Against LPS-Induced Osteolysis

Aseptic loosening and periprosthetic infection leading to inflammatory osteolysis is a major complication associated with total joint arthroplasty (TJA). The liberation of bacterial products and/or implant-derived wear particles activates immune cells that produce pro-osteoclastogenic cytokines that enhance osteoclast recruitment and activity, leading to bone destruction and osteolysis. Therefore, agents that prevent the inflammatory response and/or attenuate excessive osteoclast (OC) formation and bone resorption offer therapeutic potential by prolonging the life of TJA implants. Alexidine dihydrochloride (AD) is a bisbiguanide compound commonly used as an oral disinfectant and in contact lens solutions. It possesses antimicrobial, anti-inflammatory and anticancer properties; however, its effects on OC biology are poorly described. Here, we demonstrate that AD inhibits OC formation and bone resorption in vitro and exert prophylatic protection against LPS-induced osteolysis in vivo. Biochemical analysis demonstrated that AD suppressed receptor activator of NF-κB ligand (RANKL)-induced activation of mitogen-activated protein kinases (ERK, p38, and JNK), leading to the downregulation of NFATc1. Furthermore, AD disrupted F-actin ring formation and attenuated the ability of mature OC to resorb bone. Collectively, our findings suggest that AD may be a promising prophylactic anti-osteoclastic/resorptive agent for the treatment of osteolytic diseases caused by excessive OC formation and function.

Particle-Induced Osteolysis Is Mediated by TIRAP/Mal in Vitro and in Vivo: Dependence on Adherent Pathogen-Associated Molecular Patterns

BACKGROUND

Proinflammatory signaling by toll-like receptors (TLRs) likely contributes to biologic responses to wear particles causing aseptic loosening. We recently reported associations with aseptic loosening in patients with polymorphisms in the locus encoding an adapter protein specific for TLR-2 and TLR-4 known as toll/interleukin-1 receptor domain-containing adapter protein/MyD88 adapter-like (TIRAP/Mal). To directly examine the contribution of TIRAP/Mal, we tested the hypothesis that TIRAP/Mal deficiency reduces the activity of wear particles. Signaling by TLR-2 and TLR-4 through TIRAP/Mal can be activated by bacterial pathogen-associated molecular patterns (PAMPs) such as lipopolysaccharide or endogenous alarmins. To distinguish between those possibilities, we tested the hypothesis that the effects of TIRAP/Mal depend on the adherence of bacterial PAMPs to the particles.

METHODS

In vitro mRNA levels and secretion of tumor necrosis factor-α, interleukin (IL)-1β, and IL-6 were measured after incubating wild-type and TIRAP/Mal(-/-) macrophages in the presence or absence of titanium particles with adherent bacterial debris, so-called endotoxin-free particles, or particles with adherent lipopolysaccharide. In vivo osteolysis was measured after implanting titanium particles on the calvaria of wild-type and TIRAP/Mal(-/-) mice.

RESULTS

TIRAP/Mal deficiency significantly inhibited the activity of titanium particles with adherent bacterial debris to stimulate in vivo osteolysis and in vitro cytokine mRNAs and secretion. Those effects are dependent on adherent PAMPs because removal of >99% of the adherent bacterial debris from the particles significantly reduced their activity and the remaining activity was not dependent on TIRAP/Mal. Moreover, adherence of highly purified lipopolysaccharide to the endotoxin-free particles reconstituted the activity and the dependence on TIRAP/Mal.

CONCLUSIONS

TIRAP/Mal deficiency reduces inflammatory responses and osteolysis induced by particles with adherent PAMPs.

CLINICAL RELEVANCE

Our results, coupled with the genetic associations between aseptic loosening and polymorphisms within the TIRAP/Mal locus, support TLR signaling through TIRAP/Mal as one of the factors that enhances the activity of wear particles and further support the hypothesis that bacterial PAMPs likely contribute to aseptic loosening in a subset of patients.

Endotoxin contamination: a key element in the interpretation of nanosafety studies

The study of toxicity and potential risks of engineered nanoparticles is of particular importance in nanomedicine. Endotoxin, a common contaminant of bacterial origin, has biological effects that can mask the true biological effects of nanoparticles, if its presence is overlooked. In this review, we report the features of nanoparticle contamination by endotoxin, and the different biological effects of endotoxin-contaminated nanoparticles. We will describe different methods for endotoxin detection applied to nanoparticles, and discuss their pros and cons. Eventually, we describe various methods for eliminating endotoxin contamination in nanoparticles. Although there is no universal technique for efficiently removing endotoxin from nanoparticles, specific solutions can be found case by case, which can allow us to perform nanosafety studies in biologically relevant conditions.

The collaggrecan: Synthesis and visualization of an artificial proteoglycan

An artificial aggrecan-like proteoglycan has been designed and synthesized in vitro. At variance with natural proteoglycans, whose glycosaminoglycan chains are always O-linked via a tetrasaccharide bridge to the serine residues of a specific protein core, the present structure consists of chondroitin-6-sulfate chains directly bound to the lysine and hydroxylysine residues of a collagen molecule backbone. The resulting macromolecule has been characterized by histochemistry, atomic force microscopy and FTIR. The number of variables involved (e.g., length and type of the collagen backbone, glycosaminoglycan species, sulfation type and pattern, molecular weight, number and length of side chains, etc.) makes possible to conceive an almost endless variety of artificial proteoglycans, each precisely tailored to a specific functional role. In addition to their use as biomaterials, glycated collagens interact with cells in complex ways and a previous study has already shown the ability of a glycated collagen to redirect fibroblastoma cells from proliferation to differentiation. The research is still underway.

Chitosan leads to downregulation of YKL-40 and inflammasome activation in human macrophages

Chitosan, the deacetylated derivative of chitin, is used as biomaterial in diverse settings. It is also found on pathogens and can be proinflammatory. Shorter derivatives of chitosan can be generated chemically or enzymatically, chitosan oligosaccharides (ChOS). There is variation in the chemical composition of ChOS, including size distribution, but in general, they have been described as inert or anti-inflammatory. Active human chitinases can cleave chitin and chitosan, while inactive chitinases bind both but do not cleave. Both active and inactive chitinases have important roles in the immune response. The inactive chitinase YKL-40 is expressed highly during inflammation and has been proposed as a marker of poor prognosis. YKL-40 acts as a negative regulator of the inflammasome and as a positive regulator of angiogenesis. Levels of YKL-40 can therefore regulate levels of inflammation, the extent of angiogenesis, and the process of inflammation resolution. This study shows that chitosan leads to reduced secretion of YKL-40 by primary human macrophages and that this is concomitant with inflammasome activation. This was most pronounced with a highly deacetylated ChOS. No effect on the secretion of the active chitinase Chit-1 was detected. Smaller and more acetylated ChOS did not affect YKL-40 levels nor inflammasome activation. We conclude that this effect on the levels of YKL-40 is a part of the proinflammatory mechanisms of chitosan and its derivatives.

Calcitonin gene-related peptide modulates the production of pro-inflammatory cytokines associated with periprosthetic osteolysis by THP-1 macrophage-like cells

OBJECTIVE

An anti-resorptive impact of the neuropeptide calcitonin gene-related peptide (CGRP) on periprosthetic osteolysis, the leading cause of early prosthesis loosening, has been shown previously. In this study, the impact of CGRP on pro-inflammatory cytokine production associated with periprosthetic osteolysis was analysed using THP-1 macrophage-like cells.

METHODS

Cells were stimulated with ultra-high-molecular-weight polyethylene (UHMWPE) particles (cell-to-particle ratios of 1:100 and 1:500) and lipopolysaccharides (LPS; 1 µg/ml) to establish osteolytic conditions, and simultaneously treated with CGRP (10(-8)M). Receptor activator of nuclear factor-κB (RANK), RANK ligand (RANKL) and tumour necrosis factor (TNF)-α mRNA expression were measured by quantitative RT-PCR. RANK protein was detected by Western blot. Secreted protein levels of TNF-α as well as interleukin (IL)-1β and IL-6 were quantified in cell culture supernatants by ELISA and Bio-Plex cytokine assay, respectively.

RESULTS

Activation of macrophage-like cells failed to enhance the production of RANK but led to a dose- and time-dependent increase of TNF-α mRNA and secreted protein levels of TNF-α, IL-1β and IL-6. Application of CGRP time-dependently suppressed TNF-α mRNA expression induced by low-particle concentrations and LPS, while both particle- and LPS-induced secretion of TNF-α was inhibited. A pronounced inhibitory effect of CGRP on LPS-induced cytokine production at 24 h of incubation was also observed with IL-1β and IL-6.

CONCLUSIONS

CGRP shows a time-dependent inhibitory effect on the secretion of osteolysis-associated pro-inflammatory cytokines, indicating an indirect anti-resorptive influence of the neuropeptide on both aseptic prosthesis loosening and bacterially induced bone resorption which might enhance the life time of total joint replacements.

Do genetic susceptibility, Toll-like receptors, and pathogen-associated molecular patterns modulate the effects of wear?

Overwhelming evidence supports the concept that wear particles are the primary initiator of aseptic loosening of orthopaedic implants. It is likely, however, that other factors modulate the biologic response to wear particles. This review focuses on three potential other factors: genetic susceptibility, Toll-like receptors (TLRs), and bacterial pathogen-associated molecular patterns (PAMPs). WHERE ARE WE NOW?: Considerable evidence is emerging that both genetic susceptibility and TLR activation are important factors that modulate the biologic response to wear particles, but it remains controversial whether bacterial PAMPs also do so. WHERE DO WE NEED TO GO?: Detailed understanding of the roles of these other factors may lead to identification of novel therapeutic targets for patients with aseptic loosening. HOW DO WE GET THERE?: Highest priority should be given to polymorphism replication studies with large numbers of patients and studies to replicate the reported correlation between bacterial biofilms and the severity of aseptic loosening.

Endotoxin depletion of recombinant protein preparations through their preferential binding to histidine tags

The presence of endotoxins in preparations of recombinantly produced therapeutic proteins poses serious problems for patients. Endotoxins can cause fever, respiratory distress syndromes, intravascular coagulation, or endotoxic shock. A number of methods have been devised to remove endotoxins from protein preparations using separation procedures based on molecular mass or charge properties. Most of the methods are limited in their endotoxin removal capacities and lack general applicability. We are describing a biotechnological approach for endotoxin removal. This strategy exploits the observation that endotoxins form micelles that expose negative charges on their surface, leading to preferential binding of endotoxins to cationic surfaces, allowing the separation from their resident protein. Endotoxins exhibit high affinity to stretches of histidines, which are widely used tools to facilitate the purification of recombinant proteins. They bind to nickel ions and are the basis for protein purification from cellular extracts by immobilized metal affinity chromatography. We show that the thrombin-mediated cleavage of two histidine tags from the purified recombinant protein and the adsorption of these histidine tags and their associated endotoxins to a nickel affinity column result in an appreciable depletion of the endotoxins in the purified protein fraction.

Adsorption of albumin on flax fibers increases endothelial cell adhesion and blood compatibility in vitro

The physical and chemical properties of flax (linen) are attractive from the perspective of biomaterials science and engineering. Flax textiles uniquely combine hydrophilicity and strength, with the technical know-how to produce precisely engineered two- and three-dimensional knitted or woven structures. It is, however, extremely difficult to completely remove endotoxins from the flax, and this essentially precludes the use of linen for implant purposes. Herein, the potential utility of flax textiles for blood-contacting applications is investigated, using purified two-dimensional mesh specimens, with and without an albumin surface coating. It was hypothesized that the albumin coating will abolish the effect of adherent endotoxins at the flax's surface. In vitro cell viability assays showed that the flax mesh ± albumin is not cytotoxic. The albumin coating reduced (but not abolished) the effect of surface-exposed endotoxins (Limulus amebocyte lysate test). Under dynamic conditions, the albumin coating favors coverage with endothelial cells. Experiments with fresh human blood plasma (platelet-rich and platelet-free) showed that the albumin coating reduces the thrombogenicity in vitro. Platelets adhered to the albumin-coated flax mesh showed a less flattened structure. Although the results of this work cannot be extrapolated easily to in vivo situations, the data reveal that woven or knitted tubular structures produced from flax fibers may hold promise as implantable blood contacting devices like for instance vascular grafts.