Highlights on Advancing Frontiers in Tissue Engineering

Beyond hype: unveiling the Real challenges in clinical translation of 3D printed bone scaffolds and the fresh prospects of bioprinted organoids

Bone defects pose significant challenges in healthcare, with over 2 million bone repair surgeries performed globally each year. As a burgeoning force in the field of bone tissue engineering, 3D printing offers novel solutions to traditional bone transplantation procedures. However, current 3D-printed bone scaffolds still face three critical challenges in material selection, printing methods, cellular self-organization and co-culture, significantly impeding their clinical application. In this comprehensive review, we delve into the performance criteria that ideal bone scaffolds should possess, with a particular focus on the three core challenges faced by 3D printing technology during clinical translation. We summarize the latest advancements in non-traditional materials and advanced printing techniques, emphasizing the importance of integrating organ-like technologies with bioprinting. This combined approach enables more precise simulation of natural tissue structure and function. Our aim in writing this review is to propose effective strategies to address these challenges and promote the clinical translation of 3D-printed scaffolds for bone defect treatment.

Targeted Cancer Therapy-on-A-Chip

Targeted cancer therapy (TCT) is gaining increased interest because it reduces the risks of adverse side effects by specifically treating tumor cells. TCT testing has traditionally been performed using two-dimensional (2D) cell culture and animal studies. Organ-on-a-chip (OoC) platforms have been developed to recapitulate cancer in vitro, as cancer-on-a-chip (CoC), and used for chemotherapeutics development and testing. This review explores the use of CoCs to both develop and test TCTs, with a focus on three main aspects, the use of CoCs to identify target biomarkers for TCT development, the use of CoCs to test free, un-encapsulated TCTs, and the use of CoCs to test encapsulated TCTs. Despite current challenges such as system scaling, and testing externally triggered TCTs, TCToC shows a promising future to serve as a supportive, pre-clinical platform to expedite TCT development and bench-to-bedside translation.

In situ biomineralization reinforcing anisotropic nanocellulose scaffolds for guiding the differentiation of bone marrow-derived mesenchymal stem cells

Nanocellulose (NC) is a promising biopolymer for various biomedical applications owing to its biocompatibility and low toxicity. However, it faces challenges in tissue engineering (TE) applications due to the inconsistency of the microenvironment within the NC-based scaffolds with target tissues, including anisotropy microstructure and biomechanics. To address this challenge, a facile swelling-induced nanofiber alignment and a novel in situ biomineralization reinforcement strategies were developed for the preparation of NC-based scaffolds with tunable anisotropic structure and mechanical strength for guiding the differentiation of bone marrow-derived mesenchymal stem cells for potential TE application. The bacterial cellulose (BC) and cellulose nanofibrils (CNFs) based scaffolds with tunable swelling anisotropic index in the range of 10-100 could be prepared by controlling the swelling medium. The in situ biomineralization efficiently reinforced the scaffolds with 2-4 times and 10-20 times modulus increasement for BC and CNFs, respectively. The scaffolds with higher mechanical strength were superior in supporting cell growth and proliferation, suggesting the potential application in TE application. This work demonstrated the feasibility of the proposed strategy in the preparation of scaffolds with mechanical anisotropy to induce cells-directed differentiation for TE applications.

Translational Aspects of 3D and 4D Printing and Bioprinting

Three-dimensional (3D) printed medical devices include orthopedic and craniofacial implants, surgical tools, and external prosthetics that have been directly used in patients. While the advances of additive manufacturing techniques in the production of medical devices have been on the rise, clinical translation of living cellular constructs face significant limitations in terms of regulatory affairs, process technology, and materials development. In this perspective, the current status-quo of 3D and four-dimensional (4D) (bio)printing is summarized, current advancements are discussed and the challenges that need to be addressed for improved industrial translation and clinical applications of bioprinting are highlighted. It is focused on a multidisciplinary approach in discussing the key translational considerations, from the perspective of industry, regulatory bodies, funding strategies, and future directions.

Prevascularized spongy-like hydrogels maintain their angiogenic potential after prolonged hypothermic storage

The chronic shortage of organs and tissues for transplantation represents a dramatic burden on healthcare systems worldwide. Tissue engineering offers a potential solution to address these shortages, but several challenges remain, with prevascularization being a critical factor for in vivo survival and integration of tissue engineering products. Concurrently, a different challenge hindering the clinical implementation of such products, regards their efficient preservation from the fabrication site to the bedside. Hypothermia has emerged as a potential solution for this issue due to its milder effects on biologic systems in comparison with other cold preservation methodologies. Its impact on prevascularization, however, has not been well studied. In this work, 3D prevascularized constructs were fabricated using adipose-derived stromal vascular fraction cells and preserved at 4 °C using Hypothermosol or basal culture media (α-MEM). Hypothermosol efficiently preserved the structural and cellular integrity of prevascular networks as compared to constructs before preservation. In contrast, the use of α-MEM led to a clear reduction in prevascular structures, with concurrent induction of high levels of apoptosis and autophagy at the cellular level. In vivo evaluation using a chorioallantoic membrane model demonstrated that, in opposition to α-MEM, Hypothermosol preservation retained the angiogenic potential of constructs before preservation by recruiting a similar number of blood vessels from the host and presenting similar integration with host tissue. These results emphasize the need of studying the impact of preservation techniques on key properties of tissue engineering constructs such as prevascularization, in order to validate and streamline their clinical application.

Organizational aspects of tissue engineering clinical translation: insights from a qualitative case study

Background

Tissue engineering is a multidisciplinary field that combines principles from cell biology, bioengineering, material sciences, medicine and surgery to create functional and viable bioproducts that can be used to repair or replace damaged or diseased tissues in the human body. The complexity of tissue engineering can affect the prospects of efficiently translating scientific discoveries in the field into scalable clinical approaches that could benefit patients. Organizational challenges may play a key role in the clinical translation of tissue engineering for the benefit of patients.

Methods

To gain insight into the organizational aspects of tissue engineering that may create impediments to efficient clinical translation, we conducted a retrospective qualitative case study of one tissue engineering multi-site translational project on knee cartilage engineered tissue grafts. We collected qualitative data using a set of different methods: semi-structured interviews, documentary research and audio-visual content analysis.

Results

Our study identified various challenges associated to first-in-human trials in tissue engineering particularly related to: logistics and communication; research participant recruitment; clinician and medical student participation; study management; and regulation.

Conclusions

While not directly generalizable to other types of advanced therapies or to regenerative medicine in general, our results offer valuable insights into organizational barriers that may prevent efficient clinical translation in the field of tissue engineering.

Applications of hydrogels in tissue-engineered repairing of temporomandibular joint diseases

Epidemiological studies reveal that symptoms of temporomandibular joint disorders (TMDs) occur in 60-70% of adults. The inflammatory damage caused by TMDs can easily lead to defects in the articular disc, condylar cartilage, subchondral bone and muscle of the temporomandibular joint (TMJ) and cause pain. Despite the availability of various methods for treating TMDs, few existing treatment schemes can achieve permanent recovery. This necessity drives the search for new approaches. Hydrogels, polymers with high water content, have found widespread use in tissue engineering and regeneration due to their excellent biocompatibility and mechanical properties, which resemble those of human tissues. In the context of TMD therapy, numerous experiments have demonstrated that hydrogels show favorable effects in aspects such as articular disc repair, cartilage regeneration, muscle repair, pain relief, and drug delivery. This review aims to summarize the application of hydrogels in the therapy of TMDs based on recent research findings. It also highlights deficiencies in current hydrogel research related to TMD therapy and outlines the broad potential of hydrogel applications in treating TMJ diseases in the future.

Drug repurposing for regenerative medicine and cosmetics: Scientific, technological and economic issues

Regenerative medicine and cosmetics are currently two outstanding fields for drug discovery. Although many pharmaceutical products for regenerative medicine and cosmetics have received approval by official agencies, several challenges are still needed to overcome, especially financial and time issues. As a result, drug repositioning, which is the usage of previously approved drugs for new treatment, stands out as a promising approach to tackle these problems. Recently, increasing scientific evidence is collected to demonstrate the applicability of this novel method in the field of regenerative medicine and cosmetics. Experts in drug development have also taken advantage of novel technologies to discover new candidates for repositioning purposes following computational approach, one of two main approaches of drug repositioning. Therefore, numerous repurposed candidates have obtained approval to enter the market and have witnessed financial success such as minoxidil and fingolimod. The benefits of drug repositioning are undeniable for regenerative medicine and cosmetics. However, some aspects still need to be carefully considered regarding this method including actual effectiveness during clinical trials, patent regulations, data integration and analysis, publicly unavailable databases as well as environmental concerns and more effort are required to overcome these obstacles.

Alternatives of Animal Models for Biomedical Research: a Comprehensive Review of Modern Approaches

Biomedical research has long relied on animal models to unravel the intricacies of human physiology and pathology. However, concerns surrounding ethics, expenses, and inherent species differences have catalyzed the exploration of alternative avenues. The contemporary alternatives to traditional animal models in biomedical research delve into three main categories of alternative approaches: in vitro models, in vertebrate models, and in silico models. This unique approach to artificial intelligence and machine learning has been a keen interest to be used in different biomedical research. The main goal of this review is to serve as a guide to researchers seeking novel avenues for their investigations and underscores the importance of considering alternative models in the pursuit of scientific knowledge and medical breakthroughs, including showcasing the broad spectrum of modern approaches that are revolutionizing biomedical research and leading the way toward a more ethical, efficient, and innovative future. Models can insight into cellular processes, developmental biology, drug interaction, assessing toxicology, and understanding molecular mechanisms.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed. FTIR tests were carried out to determine if the proposed crosslinking reactions for each crosslinking agent occurred as expected, obtaining positive results in this aspect. Regarding the characterization of the properties of each system, two main trends were observed, from which it could be established that crosslinking with G and EDC-NHS turned out to be more effective and beneficial than with the other two crosslinking agents, producing significant improvements with respect to the base CH/CG hydrogel. In addition, in vitro tests demonstrated the potential application in TE of these systems, especially for those crosslinked with G, T and EDC-NHS.

An overview of the production of tissue extracellular matrix and decellularization process

Thousands of patients need an organ transplant yearly, while only a tiny percentage have this chance to receive a tissue/organ transplant. Nowadays, decellularized animal tissue is one of the most widely used methods to produce engineered scaffolds for transplantation. Decellularization is defined as physically or chemically removing cellular components from tissues while retaining structural and functional extracellular matrix (ECM) components and creating an ECM-derived scaffold. Then, decellularized scaffolds could be reseeded with different cells to fabricate an autologous graft. Effective decellularization methods preserve ECM structure and bioactivity through the application of the agents and techniques used throughout the process. The most valuable agents for the decellularization process depend on biological properties, cellular density, and the thickness of the desired tissue. ECM-derived scaffolds from various mammalian tissues have been recently used in research and preclinical applications in tissue engineering. Many studies have shown that decellularized ECM-derived scaffolds could be obtained from tissues and organs such as the liver, cartilage, bone, kidney, lung, and skin. This review addresses the significance of ECM in organisms and various decellularization agents utilized to prepare the ECM. Also, we describe the current knowledge of the decellularization of different tissues and their applications.

Resveratrol/Selenium Nanocomposite with Antioxidative and Antibacterial Properties

In this work, we synthesized a new composite material comprised of previously formulated resveratrol nanobelt-like particles (ResNPs) and selenium nanoparticles (SeNPs), namely ResSeNPs. Characterization was provided by FESEM and optical microscopy, as well as by UV-Vis and FTIR spectroscopy, the last showing hydrogen bonds between ResNPs and SeNPs. DPPH, TBA, and FRAP assays showed excellent antioxidative abilities with ResNPs and SeNPs contributing mainly to lipid peroxidation inhibition and reducing/scavenging activity, respectively. The antibacterial effect against common medicinal implant colonizers pointed to notably higher activity against Staphylococcus isolates (minimal inhibitory concentrations 0.75-1.5%) compared to tested gram-negative species (Escherichia coli and Pseudomonas aeruginosa). Antibiofilm activity against S. aureus, S. epidermidis, and P. aeruginosa determined in a crystal violet assay was promising (up to 69%), but monitoring of selected biofilm-related gene expression (pelA and algD) indicated the necessity of the involvement of a larger number of genes in the analysis in order to further establish the underlying mechanism. Although biocompatibility screening showed some cytotoxicity and genotoxicity in MTT and alkaline comet assays, respectively, it is important to note that active antioxidative and antibacterial/antibiofilm concentrations were non-cytotoxic and non-genotoxic in normal MRC-5 cells. These results encourage further composite improvements and investigation in order to adapt it for specific biomedical purposes.

Acellular dermal matrix in urethral reconstruction

The management of severe urethral stricture has always posed a formidable challenge. Traditional approaches such as skin flaps, mucosal grafts, and urethroplasty may not be suitable for lengthy and intricate strictures. In the past two decades, tissue engineering solutions utilizing acellular dermal matrix have emerged as potential alternatives. Acellular dermal matrix (ADM) is a non-immunogenic biological collagen scaffold that has demonstrated its ability to induce layer-by-layer tissue regeneration. The application of ADM in urethral reconstruction through tissue engineering has become a practical endeavor. This article provides an overview of the preparation, characteristics, advantages, and disadvantages of ADM along with its utilization in urethral reconstruction via tissue engineering.

Development of Human-Derived Photocrosslinkable Gelatin Hydrogels for Tissue Engineering

Hydrogels are often used as biomimetic matrices for tissue regeneration. The source of the hydrogel is of utmost importance, as it affects the physicochemical characteristics and must be carefully selected to stimulate specific cell behaviors. Naturally derived polymeric biomaterials have inherent biological moieties, such as cell binding and protease cleavage sites, and thus can provide a suitable microenvironment for cells. Human-derived matrices can mitigate potential risks associated with the immune response and disease transmission from animal-derived biomaterials. In this article, we developed glycidyl methacrylate-modified human-derived gelatin (hGelGMA) hydrogels for use in tissue engineering applications. By adjusting the glycidyl methacrylate concentration in the reaction mixture, we synthesized hGelGMA with low, medium, and high degrees of modification referred to as hGelGMA-L, hGelGMA-M, and hGelGMA-H, respectively. The amount of polymeric networks in the hydrogels was increased proportionally with the degree of modification. This change has resulted in a decreasing trend in pore size, porosity, and consequent swelling ratio. Similarly, increasing the polymer concentration also exhibited slower enzymatic degradation. On the other hand, increasing the polymer concentration led to an improvement in mechanical properties, where the compressive moduli of hGelGMA-L, hGelGMA-M, and hGelGMA-H hydrogels have changed at 2.9 ± 1.0, 13.7 ± 0.9, and 26.4 ± 2.5 kPa, respectively. The cytocompatibility of hGelGMA was assessed by 3D encapsulation of human-derived cells, including human dermal fibroblasts (HDFs) and human mesenchymal stem cells (hMSCs), in vitro. Regardless of the degree of glycidyl methacrylate modification, the hGelGMA hydrogels preserved the viability of encapsulated cells and supported their growth and proliferation. HDF cells showed a higher metabolic activity in hGelGMA-H, while MSCs exhibited an increased metabolic activity when they were encapsulated in hGelGMA-M or hGelGMA-H. These results showed that photocrosslinkable human-derived gelatin-based hydrogels can be synthesized and their physical properties can be distinctly fine-tuned to different extents as a function of their degrees of modification depending on the needs of the target tissue. Due to its promising physical and biological properties, it is anticipated that hGelGMA can be utilized in a wide spectrum of tissue engineering applications.

Fundamental properties of smart hydrogels for tissue engineering applications: A review

Tissue engineering is an advanced and potential biomedical approach to treat patients suffering from lost or failed an organ or tissue to repair and regenerate damaged tissues that increase life expectancy. The biopolymers have been used to fabricate smart hydrogels to repair damaged tissue as they imitate the extracellular matrix (ECM) with intricate structural and functional characteristics. These hydrogels offer desired and controllable qualities, such as tunable mechanical stiffness and strength, inherent adaptability and biocompatibility, swellability, and biodegradability, all crucial for tissue engineering. Smart hydrogels provide a superior cellular environment for tissue engineering, enabling the generation of cutting-edge synthetic tissues due to their special qualities, such as stimuli sensitivity and reactivity. Numerous review articles have presented the exceptional potential of hydrogels for various biomedical applications, including drug delivery, regenerative medicine, and tissue engineering. Still, it is essential to write a comprehensive review article on smart hydrogels that successfully addresses the essential challenging issues in tissue engineering. Hence, the recent development on smart hydrogel for state-of-the-art tissue engineering conferred progress, highlighting significant challenges and future perspectives. This review discusses recent advances in smart hydrogels fabricated from biological macromolecules and their use for advanced tissue engineering. It also provides critical insight, emphasizing future research directions and progress in tissue engineering.

The Potential Role of Ionic Liquid as a Multifunctional Dental Biomaterial

In craniofacial research and routine dental clinical procedures, multifunctional materials with antimicrobial properties are in constant demand. Ionic liquids (ILs) are one such multifunctional intelligent material. Over the last three decades, ILs have been explored for different biomedical applications due to their unique physical and chemical properties, high task specificity, and sustainability. Their stable physical and chemical characteristics and extremely low vapor pressure make them suitable for various applications. Their unique properties, such as density, viscosity, and hydrophilicity/hydrophobicity, may provide higher performance as a potential dental material. ILs have functionalities for optimizing dental implants, infiltrate materials, oral hygiene maintenance products, and restorative materials. They also serve as sensors for dental chairside usage to detect oral cancer, periodontal lesions, breath-based sobriety, and dental hard tissue defects. With further optimization, ILs might also make vital contributions to craniofacial regeneration, oral hygiene maintenance, oral disease prevention, and antimicrobial materials. This review explores the different advantages and properties of ILs as possible dental material.

Recent advances in nano-scaffolds for tissue engineering applications: Toward natural therapeutics

Among the promising methods for repairing or replacing tissue defects in the human body and the hottest research topics in medical science today are regenerative medicine and tissue engineering. On the other hand, nanotechnology has been expanded into different areas of regenerative medicine and tissue engineering due to its essential benefits in improving performance in various fields. Nanotechnology, a helpful strategy in tissue engineering, offers new solutions to unsolved problems. Especially considering the excellent physicochemical properties of nanoscale structures, their application in regenerative medicine has been gradually developed, and a lot of research has been conducted in this field. In this regard, various nanoscale structures, including nanofibers, nanosheets, nanofilms, nano-clays, hollow spheres, and different nanoparticles, have been developed to advance nanotechnology strategies with tissue repair goals. Here, we comprehensively review the application of the mentioned nanostructures in constructing nanocomposite scaffolds for regenerative medicine and tissue engineering. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Diagnostic Tools > Biosensing.

The Lower in Vivo Osteogenicity of Adipose Tissue-Derived Stem Cells Correlates with a Higher Innate Immune Response

Adipose tissue-derived mesenchymal stem cells (ATSCs) have been used as an alternative to bone marrow-derived mesenchymal stem cells (BMSCs) for bone tissue engineering applications. The ability of ATSCs to promote new bone formation remains lower than that of BMSCs. This study aimed to investigate the mechanisms underlying osteogenicity differences between human ATSCs and BMSCs in ceramic constructs, focusing on the effects of inflammation on this process. In contrast to ATSC-containing constructs, which did not induce bone formation in an ectopic mouse model, BMSC constructs consistently did so. Gene expression analysis revealed that human BMSCs, concomitantly with host murine progenitors, differentiated into the osteogenic lineage early post-implantation. In contrast, ATSCs differentiated later, when few implanted viable cells remained post-implantation, while the host murine cells did not differentiate. Comparison of the inflammatory profile in the cell constructs indicated concomitant upregulation of some human and murine inflammatory genes in the ATSC-constructs compared to the BMSC-constructs during the first-week post-implantation. The high level of chemokine production by the ATSCs was confirmed at the gene and protein levels before implantation. The immune cell recruitment within the constructs was then explored post-implantation. Higher numbers of TRAP-/ MRC1 (CD206) + multinucleated giant cells, NOS2 + M1, and ARG1 + M2 macrophages were present in the ATSC constructs than in the BMSC constructs. These results proved that ATSCs are a transient source of inflammatory cytokines promoting a transient immune response post-implantation; this milieu correlates with impaired osteogenic differentiation of both the implanted ATSCs and the host osteoprogenitor cells.

Carbon Nanomaterial-Based Hydrogels as Scaffolds in Tissue Engineering: A Comprehensive Review

Carbon-based nanomaterials (CBNs) are a category of nanomaterials with various systems based on combinations of sp2 and sp3 hybridized carbon bonds, morphologies, and functional groups. CBNs can exhibit distinguished properties such as high mechanical strength, chemical stability, high electrical conductivity, and biocompatibility. These desirable physicochemical properties have triggered their uses in many fields, including biomedical applications. In this review, we specifically focus on applying CBNs as scaffolds in tissue engineering, a therapeutic approach whereby CBNs can act for the regeneration or replacement of damaged tissue. Here, an overview of the structures and properties of different CBNs will first be provided. We will then discuss state-of-the-art advancements of CBNs and hydrogels as scaffolds for regenerating various types of human tissues. Finally, a perspective of future potentials and challenges in this field will be presented. Since this is a very rapidly growing field, we expect that this review will promote interdisciplinary efforts in developing effective tissue regeneration scaffolds for clinical applications.

Fabrication of shape-designable cartilage from human induced pluripotent stem cell-derived chondroprogenitors using a cell self-aggregation technique

With the advancement of tissue engineering technologies, implantable materials have been developed for use in facial plastic surgery, including auriculoplasty and rhinoplasty. Tissue-engineered cartilage comprising only cells and cell-produced extracellular matrix is considered valuable as there is no need to consider problems associated with scaffold absorption or immune responses commonly related to conventional artificial materials. However, it is exceedingly difficult to produce large-sized complex shapes of cartilage without the use of scaffolds. In this study, we describe the production of shape-designable cartilage using a novel cell self-aggregation technique (CAT) and chondroprogenitor cells derived from human induced pluripotent stem cells as the source. The method described does not require special equipment such as bio-3D printers, and the produced tissue can be induced into well-matured cartilage with abundant cartilage matrixin vitro. Using CAT, we were able to generate cartilage in the form of rings or tubes with adjustable inner diameter and curvature, over a range of several centimeters, without the use of scaffolds. Thein vitrofabrication of shape-designable cartilage using CAT is a promising development in facial plastic surgery.

A Review on Polymers for Biomedical Applications on Hard and Soft Tissues and Prosthetic Limbs

In the past decades, there has been a significant increase in the use of polymers for biomedical applications. The global medical polymer market size was valued at USD 19.92 billion in 2022 and is expected to grow at a CAGR of 8.0% from 2023 to 2030 despite some limitations, such as cost (financial limitation), strength compared to metal plates for bone fracture, design optimization and incorporation of reinforcement. Recently, this increase has been more pronounced due to important advances in synthesis and modification techniques for the design of novel biomaterials and their behavior in vitro and in vivo. Also, modern medicine allows the use of less invasive surgeries and faster surgical sutures. Besides their use in the human body, polymer biomedical materials must have desired physical, chemical, biological, biomechanical, and degradation properties. This review summarizes the use of polymers for biomedical applications, mainly focusing on hard and soft tissues, prosthetic limbs, dental applications, and bone fracture repair. The main properties, gaps, and trends are discussed.

Modeling new trends in bone regeneration, using the BERTopic approach

Aim: Bibliometric surveys are time-consuming endeavors, which cannot be scaled up to meet the challenges of ever-expanding fields, such as bone regeneration. Artificial intelligence, however, can provide smart tools to screen massive amounts of literature, and we relied on this technology to automatically identify research topics. Materials & methods: We used the BERTopic algorithm to detect the topics in a corpus of MEDLINE manuscripts, mapping their similarities and highlighting research hotspots. Results: Using BERTopic, we identified 372 topics and were able to assess the growing importance of innovative and recent fields of investigation such as 3D printing and extracellular vescicles. Conclusion: BERTopic appears as a suitable tool to set up automatic screening routines to track the progress in bone regeneration.

Advances in Hypoxia-Inducible Factor-1α Stabilizer Deferoxamine in Tissue Engineering

Deferoxamine (DFO) is an iron chelator with FDA approval for the clinical treatment of iron excess. As a well-established stabilizer of hypoxia-inducible factor-1α (HIF-1α), DFO can efficiently upregulate HIF-1α and relevant downstream angiogenic factors, leading to accelerated vascularization. Moreover, as increasing studies have focused on DFO as a hypoxia-mimetic agent in recent years, it has been shown that DFO exhibited multiple functions, including stem cell regulation, immunoregulation, provascularization, and pro-osteogenesis. On the contrary, DFO can bind excess iron ions in wounds of chronic inflammation, while serving as an antioxidant with the characteristic of removing reactive oxygen species. Collectively, these characteristics make DFO a potent modulator in tissue engineering for increasing tissue integration of biomaterials in vivo and facilitating wound healing. This review outlines the activity of DFO as a representative hypoxia-mimetic agent in cells as well as the evolution of its application in tissue engineering. It can be concluded that DFO is a medication with tremendous promise and application value in future trends, which can optimize biomaterials and existing tissue engineering techniques for tissue regeneration.

Engineered Vasculature for Cancer Research and Regenerative Medicine

Engineered human tissues created by three-dimensional cell culture of human cells in a hydrogel are becoming emerging model systems for cancer drug discovery and regenerative medicine. Complex functional engineered tissues can also assist in the regeneration, repair, or replacement of human tissues. However, one of the main hurdles for tissue engineering, three-dimensional cell culture, and regenerative medicine is the capability of delivering nutrients and oxygen to cells through the vasculatures. Several studies have investigated different strategies to create a functional vascular system in engineered tissues and organ-on-a-chips. Engineered vasculatures have been used for the studies of angiogenesis, vasculogenesis, as well as drug and cell transports across the endothelium. Moreover, vascular engineering allows the creation of large functional vascular conduits for regenerative medicine purposes. However, there are still many challenges in the creation of vascularized tissue constructs and their biological applications. This review will summarize the latest efforts to create vasculatures and vascularized tissues for cancer research and regenerative medicine.

Biomaterials for Testicular Bioengineering: How far have we come and where do we have to go?

Traditional therapeutic interventions aim to restore male fertile potential or preserve sperm viability in severe cases, such as semen cryopreservation, testicular tissue, germ cell transplantation and testicular graft. However, these techniques demonstrate several methodological, clinical, and biological limitations, that impact in their results. In this scenario, reproductive medicine has sought biotechnological alternatives applied for infertility treatment, or to improve gamete preservation and thus increase reproductive rates in vitro and in vivo. One of the main approaches employed is the biomimetic testicular tissue reconstruction, which uses tissue-engineering principles and methodologies. This strategy pursues to mimic the testicular microenvironment, simulating physiological conditions. Such approach allows male gametes maintenance in culture or produce viable grafts that can be transplanted and restore reproductive functions. In this context, the application of several biomaterials have been proposed to be used in artificial biological systems. From synthetic polymers to decellularized matrixes, each biomaterial has advantages and disadvantages regarding its application in cell culture and tissue reconstruction. Therefore, the present review aims to list the progress that has been made and the continued challenges facing testicular regenerative medicine and the preservation of male reproductive capacity, based on the development of tissue bioengineering approaches for testicular tissue microenvironment reconstruction.

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (GelMA)/Polyethylene Oxide (PEO) Bioink

Gelatin methacryloyl scaffolds with microscale fiber structures own great significance because they can effectively mimic the extracellular matrix environment. Compared with extruding bioprinting, electrospinning technology is more suitable for establishing accurate hydrogel microfibers. However, electrospinning accurate gelatin methacryloyl microfiber remains a big challenge restricted by its bad spinnability. In this paper, polyethylene oxide, which owns promising spinnability, is added into gelatin methacryloyl hydrogel precursor to improve the spinnability of gelatin methacryloyl bioink. A three-dimensional motion platform for electrospinning is designed and built and the spinning process of microfibers under far-electric-field and near-electric-field conditions is systematically studied, respectively. As a result, scaffolds consisted of unordered and ordered microfibers are successfully fabricated under far-electric-field and near-electric field, respectively. In vitro culture experiments of human umbilical vein endothelial cells are carried out using the prepared gelatin methacryloyl microfiber scaffolds. The results show that the cells can easily attach to the microfibers and grow well. Moreover, the gelatin methacryloyl/ polyethylene oxide microfiber scaffold was directly spun on the polycaprolactone mesh scaffold printed by fused modeling printing method. The results showed that the macroscopic ordered and microscopic disordered microfiber scaffold could be successfully established, which could lead to directed cell growth. We believe that this method can effectively solve the problem of hydrogel spinnability and be a powerful tool for various biomedical engineering methods in the future.

Design and Fabrication of Mature Engineered Pre-Cardiac Tissue Utilizing 3D Bioprinting Technology and Enzymatically Crosslinking Hydrogel

The fabrication of mature engineered cardiac tissue is one of the major challenges in cardiac tissue engineering. For this purpose, we attempted to apply the 3D bioprinting approach. Aiming to construct an oriented tissue, a fine fiber-shaped scaffold with a support structure was first designed using CAD software. Then, a 3D bioprinter and cell-adhesive bio-inks were utilized to fabricate this structure. The cell-adhesive bio-inks were synthesized by combining sodium alginate and gelatin with tyramine, respectively, to form pre-gel materials that allow enzymatic crosslinking by horseradish peroxidase. By absorbance measurements, we confirmed that the tyramine modification rate of each polymer was 0.535 mmol/g-alginate and 0.219 mmol/g-gelatin. The width of the fiber-shaped scaffold was 216.8 ± 24.3 μm for the fabricated scaffold, while the design value was 200 μm. After 3D printing and adhesion-adding treatment of the scaffold with these bio-ink materials, cardiomyocytes were seeded and cultured. As a result, the cells spread onto the scaffold, and the entire pre-tissue contracted synchronously by day 6 of culture, showing a greater pulsatility than in the early days. Video analysis showed that the beating rate of pre-myocardial tissue on day 6 was 31 beats/min. In addition, we confirmed that the cardiomyocytes partially elongated along the long axis of the fiber-shaped scaffold in the pre-tissue cultured for 15 days by staining actin, suggesting the possibility of cell orientation. Furthermore, treatment with adrenaline resulted in a 7.7-fold increase in peak beating rate compared to that before treatment (from 6 beats/min to 46 beats/min), confirming the responsiveness of the pre-tissues to the drug. These results indicate that 3D bioprinting effectively produces mature cultured myocardial tissue that is oriented, contracts synchronously, and is responsive to drugs.

Green Bioprinting with Layer-by-Layer Photo-Crosslinking: A Designed Experimental Investigation on Shape Fidelity and Cell Viability of Printed Constructs

Process variables of bioprinting (including extrusion pressure, nozzle size, and bioink composition) can affect the shape fidelity and cell viability of printed constructs. Reported studies show that increasing extrusion pressure or decreasing nozzle size would decrease cell viability in printed constructs. However, a smaller nozzle size is often necessary for printing constructs of higher shape fidelity, and a higher extrusion pressure is usually needed to extrude bioink through nozzles with a smaller diameter. Because values of printing process variables that increase shape fidelity can be detrimental to cell viability, the optimum combination of variables regarding both shape fidelity and cell viability must be determined for specific bioink compositions. This paper reports a designed experimental investigation (full factorial design with three variables and two levels) on bioprinting by applying layer-by-layer photo-crosslinking and using the alginate-methylcellulose-GelMA bioink containing algae cells. The study investigates both the main effects and interaction effects of extrusion pressure, nozzle size, and bioink composition on the shape fidelity and cell viability of printed constructs. Results show that, as extrusion pressure changed from its low level to its high level, shape fidelity and cell viability decreased. As nozzle size changed from its low level to its high level, shape fidelity decreased while cell viability increased. As bioink composition changed from its low level (with more methylcellulose content in the bioink) to its high level (with less methylcellulose content in the bioink), shape fidelity and cell viability increased.

Development and Application of 3D Bioprinted Scaffolds Supporting Induced Pluripotent Stem Cells

Three-dimensional (3D) bioprinting is a revolutionary technology that replicates 3D functional living tissue scaffolds in vitro by controlling the layer-by-layer deposition of biomaterials and enables highly precise positioning of cells. With the development of this technology, more advanced research on the mechanisms of tissue morphogenesis, clinical drug screening, and organ regeneration may be pursued. Because of their self-renewal characteristics and multidirectional differentiation potential, induced pluripotent stem cells (iPSCs) have outstanding advantages in stem cell research and applications. In this review, we discuss the advantages of different bioinks containing human iPSCs that are fabricated by using 3D bioprinting. In particular, we focus on the ability of these bioinks to support iPSCs and promote their proliferation and differentiation. In addition, we summarize the applications of 3D bioprinting with iPSC-containing bioinks and put forward new views on the current research status.

Use of electroconductive biomaterials for engineering tissues by 3D printing and 3D bioprinting

Existing methods of engineering alternatives to restore or replace damaged or lost tissues are not satisfactory due to the lack of suitable constructs that can fit precisely, function properly and integrate into host tissues. Recently, three-dimensional (3D) bioprinting approaches have been developed to enable the fabrication of pre-programmed synthetic tissue constructs that have precise geometries and controlled cellular composition and spatial distribution. New bioinks with electroconductive properties have the potential to influence cellular fates and function for directed healing of different tissue types including bone, heart and nervous tissue with the possibility of improved outcomes. In the present paper, we review the use of electroconductive biomaterials for the engineering of tissues via 3D printing and 3D bioprinting. Despite significant advances, there remain challenges to effective tissue replacement and we address these challenges and describe new approaches to advanced tissue engineering.