Comparison of Mesenchymal Stem Cell Source Differentiation Toward Human Pediatric Aortic Valve Interstitial Cells within 3D Engineered Matrices

Transcriptomic Analysis of Mineralized Adipose-Derived Stem Cell Tissues for Calcific Valve Disease Modelling

Calcific aortic valve disease (CAVD) is characterized by the fibrosis and mineralization of the aortic valve, which leads to aortic stenosis and heart failure. At the cellular level, this is due to the osteoblastic-like differentiation of valve interstitial cells (VICs), resulting in the calcification of the tissue. Unfortunately, human VICs are not readily available to study CAVD pathogenesis and the implicated mechanisms in vitro; however, adipose-derived stromal/stem cells (ASCs), carrying the patient's specific genomic features, have emerged as a promising cell source to model cardiovascular diseases due to their multipotent nature, availability, and patient-specific characteristics. In this study, we describe a comprehensive transcriptomic analysis of tissue-engineered, scaffold-free, ASC-embedded mineralized tissue sheets using bulk RNA sequencing. Bioinformatic and gene set enrichment analyses revealed the up-regulation of genes associated with the organization of the extracellular matrix (ECM), suggesting that the ECM could play a vital role in the enhanced mineralization observed in these tissue-engineered ASC-embedded sheets. Upon comparison with publicly available gene expression datasets from CAVD patients, striking similarities emerged regarding cardiovascular diseases and ECM functions, suggesting a potential link between ECM gene expression and CAVDs pathogenesis. A matrisome-related sub-analysis revealed the ECM microenvironment promotes the transcriptional activation of the master gene runt-related transcription factor 2 (RUNX2), which is essential in CAVD development. Tissue-engineered ASC-embedded sheets with enhanced mineralization could be a valuable tool for research and a promising avenue for the identification of more effective aortic valve replacement therapies.

Growth Factor Immobilization to Synthetic Hydrogels: Bioactive bFGF-Functionalized Polyisocyanide Hydrogels

With its involvement in cell proliferation, migration and differentiation basic fibroblast growth factor (bFGF) has great potential for tissue engineering purposes. So far, however, clinical translation of soluble bFGF-based therapies is unsuccessful, because the required effective doses are often supraphysiological, which may cause adverse effects. An effective solution is growth factor immobilization, whereby bFGF retains its bioactivity at increased efficacy. Studied carriers include films, solid scaffolds, and particles, as well as natural and synthetic hydrogels. However, these synthetic hydrogels poorly resemble the characteristics of the native extracellular matrix (ECM). In this work, bFGF is covalently conjugated to the synthetic, but highly biocompatible, polyisocyanide-based hydrogel (PIC-bFGF), which closely mimics the architecture and mechanical properties of the ECM. The growth factor conjugation protocol is straightforward and readily extrapolated to other growth factors or proteins. The PIC-bFGF hydrogel shows a prolonged bioactivity up to 4 weeks although no clear effects on the ECM metabolism are observed. Beyond the future potential of the PIC-bFGF hydrogel toward various tissue engineering applications, this work underlines that simple biological conjugation procedures are a powerful strategy to induce additional bioactivity in 3D synthetic cell culture matrices.

Future prospects in the tissue engineering of heart valves: a focus on the role of stem cells

INTRODUCTION

Heart valve disease is a growing burden on the healthcare system. Current solutions are insufficient for young patients and do not offer relief from reintervention. Tissue engineered heart valves (TEHVs) offer a solution that grows and responds to the native environment in a similar way to a healthy valve. Stem cells hold potential to populate these valves as a malleable source that can adapt to environmental cues.

AREAS COVERED

This review covers current methods of recapitulating features of native heart valves with tissue engineering through use of stem cell populations with in situ and in vitro methods.

EXPERT OPINION

In the field of TEHVs, we see a variety of approaches in cell source, biomaterial, and maturation methods. Choosing appropriate cell populations may be very patient specific; consistency and predictability will be key to long-term success. In situ methods are closer to translation but struggle with consistent cellularization. In vitro culture requires specialized methods but may recapitulate native valve cell populations with higher fidelity. Understanding how cell populations react to valve conditions and immune response is vital for success. Detrimental valve pathologies have proven to be difficult to avoid in early translation attempts.

Rac1 mediates cadherin-11 induced cellular pathogenic processes in aortic valve calcification

BACKGROUND

Calcific aortic valve disease (CAVD), a major cause for surgical aortic valve replacement, currently lacks available pharmacological treatments. Cadherin-11 (Cad11), a promising therapeutic target, promotes aortic valve calcification in vivo, but direct Cad11 inhibition in clinical trials has been unsuccessful. Targeting of downstream Cad11 effectors instead may be clinically useful; however, the downstream effectors that mediate Cad11-induced aortic valve cellular pathogenesis have not been investigated.

APPROACH AND RESULTS

Immunofluorescence of calcified human aortic valves revealed that GTP-Rac1 is highly upregulated in calcified leaflets and is 2.15 times more co-localized with Cad11 in calcified valves than GTP-RhoA. Using dominant negative mutants in porcine aortic valve interstitial cells (PAVICs), we show that Cad11 predominantly regulates Runx2 nuclear localization via Rac1. Rac1-GEF inhibition via NSC23766 effectively reduces calcification in ex vivo porcine aortic valve leaflets treated with osteogenic media by 2.8-fold and also prevents Cad11-induced cell migration, compaction, and calcification in PAVICs. GTP-Rac1 and Trio, a known Cad11 binding partner and Rac1-GEF, are significantly upregulated in Nfatc1Cre; R26-Cad11Tg/Tg (Cad11 OX) mice that conditionally overexpress Cad11 in the heart valves by 3.1-fold and 6.3-fold, respectively. Finally, we found that the Trio-specific Rac1-GEF inhibitor, ITX3, effectively prevents Cad11-induced calcification and Runx2 induction in osteogenic conditions.

CONCLUSION

Here we show that Cad11 induces many cellular pathogenic processes via Rac1 and that Rac1 inhibition effectively prevents many Cad11-induced aortic disease phenotypes. These findings highlight the therapeutic potential of blocking Rac1-GEFs in CAVD.

The effects of maturation and aging on the rotator cuff tendon-to-bone interface

Rotator cuff tendon injuries often occur at the tendon-to-bone interface (i.e., enthesis) area, with a high prevalence for the elderly population, but the underlying reason for this phenomenon is still unknown. The objective of this study is to identify the histological, molecular, and biomechanical alterations of the rotator cuff enthesis with maturation and aging in a mouse model. Four different age groups of mice (newborn, young, adult, and old) were studied. Striking variations of the entheses were observed between the newborn and other matured groups, with collagen content, proteoglycan deposition, collagen fiber dispersion was significantly higher in the newborn group. The compositional and histological features of young, adult, and old groups did not show significant differences, except having increased proteoglycan deposition and thinner collagen fibers at the insertion sites in the old group. Nanoindentation testing showed that the old group had a smaller compressive modulus at the insertion site when compared with other groups. However, tensile mechanical testing reported that the old group demonstrated a significantly higher failure stress when compared with the young and adult groups. The proteomics analysis detected dramatic differences in protein content between newborn and young groups but minor changes among young, adult, and old groups. These results demonstrated: (1) the significant alterations of the enthesis composition and structure occur from the newborn to the young time period; (2) the increased risk of rotator cuff tendon injuries in the elderly population is not solely because of old age alone in the rodent model.

Collagen fiber regulation in human pediatric aortic valve development and disease

Congenital aortic valve stenosis (CAVS) affects up to 10% of the world population without medical therapies to treat the disease. New molecular targets are continually being sought that can halt CAVS progression. Collagen deregulation is a hallmark of CAVS yet remains mostly undefined. Here, histological studies were paired with high resolution accurate mass (HRAM) collagen-targeting proteomics to investigate collagen fiber production with collagen regulation associated with human AV development and pediatric end-stage CAVS (pCAVS). Histological studies identified collagen fiber realignment and unique regions of high-density collagen in pCAVS. Proteomic analysis reported specific collagen peptides are modified by hydroxylated prolines (HYP), a post-translational modification critical to stabilizing the collagen triple helix. Quantitative data analysis reported significant regulation of collagen HYP sites across patient categories. Non-collagen type ECM proteins identified (26 of the 44 total proteins) have direct interactions in collagen synthesis, regulation, or modification. Network analysis identified BAMBI (BMP and Activin Membrane Bound Inhibitor) as a potential upstream regulator of the collagen interactome. This is the first study to detail the collagen types and HYP modifications associated with human AV development and pCAVS. We anticipate that this study will inform new therapeutic avenues that inhibit valvular degradation in pCAVS and engineered options for valve replacement.

Stem cell-based approaches in cardiac tissue engineering: controlling the microenvironment for autologous cells

Cardiovascular disease is one of the leading causes of mortality worldwide. Cardiac tissue engineering strategies focusing on biomaterial scaffolds incorporating cells and growth factors are emerging as highly promising for cardiac repair and regeneration. The use of stem cells within cardiac microengineered tissue constructs present an inherent ability to differentiate into cell types of the human heart. Stem cells derived from various tissues including bone marrow, dental pulp, adipose tissue and umbilical cord can be used for this purpose. Approaches ranging from stem cell injections, stem cell spheroids, cell encapsulation in a suitable hydrogel, use of prefabricated scaffold and bioprinting technology are at the forefront in the field of cardiac tissue engineering. The stem cell microenvironment plays a key role in the maintenance of stemness and/or differentiation into cardiac specific lineages. This review provides a detailed overview of the recent advances in microengineering of autologous stem cell-based tissue engineering platforms for the repair of damaged cardiac tissue. A particular emphasis is given to the roles played by the extracellular matrix (ECM) in regulating the physiological response of stem cells within cardiac tissue engineering platforms.

Polysaccharide Extracted from Bletilla striata Promotes Proliferation and Migration of Human Tenocytes

Tendon healing after injury is relatively slow, mainly because of the weak activity and metabolic properties of tendon cells (tenocytes). Bletilla striata polysaccharide (BSP) has been reported to enhance cell proliferation. Here, we aimed to increase tendon cell proliferation by BSP treatment. We isolated tenocytes from the flexor tendon of human origin. Moreover, we improved the process of extracting BSP. When human tenocytes (HTs) were treated with 100 μg/mL BSP, the MEK/ERK1/2 and PI3K/Akt signaling pathways were activated, thereby enhancing the proliferation ability of tenocytes. BSP treatment also increased the migration of HTs and their ability to secrete the extracellular matrix (Col-I and Col-III). In conclusion, BSP was successfully extracted from a natural Chinese herbal extract and was shown to enhance tenocytes proliferation, migration and collagen release ability. This study is the first to demonstrate improved healing of tendons using BSP.

Guiding Mesenchymal Stem Cells into Myelinating Schwann Cell-Like Phenotypes by Using Electrospun Core-Sheath Nanoyarns

Nerve guidance conduit (NGC)-infilling substrates have been reported to facilitate the regeneration of injured peripheral nerves (PNs), especially for large nerve gaps. In this study, longitudinally oriented electrospun core-sheath nanoyarns (csNYs), consisting of a polylactic acid microfiber core and an electrospun nanofiber sheath, were fabricated for potential PN tissue engineering applications. Our novel csNY displayed a well-aligned nanofibrous surface topography, resembling the ultrastructure of axons and fascicles of a native PN system, and it also provided a mechanically stable structure. The biological results showed that the csNY significantly enhanced the attachment, growth, and proliferation of human adipose derived mesenchymal stem cells (hADMSC) and also promoted the migration, proliferation, and phenotype maintenance of rabbit Schwann cells (rSCs). Our csNY notably increased the differentiation capability of hADMSC into SC-like cells (hADMSC-SC), in comparison with a 2D tissue culture polystyrene plate. More importantly, when combined with the appropriate induction medium, our csNY promoted hADMSC-SC to express high levels of myelination-associated markers. Overall, this study demonstrates that our csNYs have great potential to serve as not only ideal in vitro culture models for understanding SC-axon interaction and SC myelination but also as promising NGC-infilling substrates for PN regeneration applications.

Interstitial cells in calcified aortic valves have reduced differentiation potential and stem cell-like properties

Valve interstitial cells (VICs) are crucial in the development of calcific aortic valve disease. The purpose of the present investigation was to compare the phenotype, differentiation potential and stem cell-like properties of cells from calcified and healthy aortic valves. VICs were isolated from human healthy and calcified aortic valves. Calcification was induced with osteogenic medium. Unlike VICs from healthy valves, VICs from calcified valves cultured without osteogenic medium stained positively for calcium deposits with Alizarin Red confirming their calcific phenotype. Stimulation of VICs from calcified valves with osteogenic medium increased calcification (p = 0.02), but not significantly different from healthy VICs. When stimulated with myofibroblastic medium, VICs from calcified valves had lower expression of myofibroblastic markers, measured by flow cytometry and RT-qPCR, compared to healthy VICs. Contraction of collagen gel (a measure of myofibroblastic activity) was attenuated in cells from calcified valves (p = 0.04). Moreover, VICs from calcified valves, unlike cells from healthy valves had lower potential to differentiate into adipogenic pathway and lower expression of stem cell-associated markers CD106 (p = 0.04) and aldehyde dehydrogenase (p = 0.04). In conclusion, VICs from calcified aortic have reduced multipotency compared to cells from healthy valves, which should be considered when investigating possible medical treatments of aortic valve calcification.

Spatial Regulation of Valve Interstitial Cell Phenotypes within Three-Dimensional Micropatterned Hydrogels

Calcific aortic valve disease (CAVD) is the third leading cause of cardiovascular disease. CAVD exhibits progressive disruption of the normally highly organized and aligned extracellular matrix (ECM) structure within the valve leaflets simultaneously with myofibroblastic and/or osteogenic differentiation of indigenous endogenous valve interstitial cells (VIC). It is unclear how the alignment of VIC within their 3D microenvironment drives VIC phenotype or how alignment affects cellular responses to biochemical cues in physiological or pathological conditions. In this study, we implement a photolithographic technique to control the alignment and elongation of both normal and diseased human aortic VIC (HAVIC) within microengineered 3D hydrogels consisting of methacrylated hyaluronic acid and methacrylated gelatin. Stripe micropatterning created distinct alignment of HAVIC within a 3D culture system, which promoted spreading and enhanced their activation and osteogenic differentiation in pro-osteogenic conditions. HAVIC from a patient with CAVD exhibited greater susceptibility to myofibroblastic and osteogenic differentiation in culture. The roles of conjugated basic fibroblastic growth factor (bFGF) and RhoA/ROCK pathway in regulating HAVIC phenotypes were also investigated in the presence of aligned microtopography. The addition of bFGF was preventative to osteogenic differentiation for healthy HAVIC; however, it promoted osteogenic differentiation in diseased HAVIC. Inhibition of the ROCK pathway only decreased osteogenic differentiation for diseased HAVIC in the aligned formation. Collectively, these results improve our knowledge of the effects that VIC alignment has on VIC phenotypes and valve disease progression. The cell culture platform also enables a better understanding of the interplay between topography, biochemical cues, and VIC differentiation and provides information useful for directing differentiation as well as valve tissue regeneration.

Achieving Controlled Biomolecule-Biomaterial Conjugation

The conjugation of biomolecules can impart materials with the bioactivity necessary to modulate specific cell behaviors. While the biological roles of particular polypeptide, oligonucleotide, and glycan structures have been extensively reviewed, along with the influence of attachment on material structure and function, the key role played by the conjugation strategy in determining activity is often overlooked. In this review, we focus on the chemistry of biomolecule conjugation and provide a comprehensive overview of the key strategies for achieving controlled biomaterial functionalization. No universal method exists to provide optimal attachment, and here we will discuss both the relative advantages and disadvantages of each technique. In doing so, we highlight the importance of carefully considering the impact and suitability of a particular technique during biomaterial design.

3D hydrogel breast cancer models for studying the effects of hypoxia on epithelial to mesenchymal transition

Solid tumors are 3D assemblies of cancer cells, together with multiple stromal cell types within an extracellular matrix. Yet, the vast majority of cell-based studies to characterize oncogenesis and discovery of new anti-cancer drugs is conducted using conventional 2D monolayer culture systems, where cells are grown on plastic substratum under normoxic environments. In current study, we generated 3D breast cancer cell culture platform consists of photocrosslinkable hydrogels and encapsulated isogenic primary (21PT) and a metastatic (21MT-2) breast cancer cell lines derived from the primary tumor and pleural effusion from the same patient. We demonstrated that hypoxia decreased cellular assembly size and density, and promoted epithelial to mesenchymal transition (EMT) process, without affecting cell viability. Next, we showed hypoxia enhanced breast cancer cell migration, and expression and secretion of lysyl oxidase (LOX), which is copper-dependent amine oxidase and has the primary function to drive the crosslinking of collagen and elastin and is regulated by hypoxia. Furthermore, to recapitulate in vivo situation, we generated breast cancer and lung cells (derived from the same patient) contact model by stacking 3D hydrogel constructs with breast cancer cells onto lung mesenchymal cells (LMC) laden-hydrogel and then showed breast cancer cells migrated towards LMC during hypoxia. Lastly, as a validation of this model for future screen of therapeutic agents, we demonstrated that LOX inhibitor exhibited a significant decrease in breast cancer cell viability, migration, and EMT. Taken together, these results validate the use of hydrogels based models to examine hypoxia related EMT in breast cancer cells.

Mechanically robust cryogels with injectability and bioprinting supportability for adipose tissue engineering

Bioengineered adipose tissues have gained increased interest as a promising alternative to autologous tissue flaps and synthetic adipose fillers for soft tissue augmentation and defect reconstruction in clinic. Although many scaffolding materials and biofabrication methods have been investigated for adipose tissue engineering in the last decades, there are still challenges to recapitulate the appropriate adipose tissue microenvironment, maintain volume stability, and induce vascularization to achieve long-term function and integration. In the present research, we fabricated cryogels consisting of methacrylated gelatin, methacrylated hyaluronic acid, and 4arm poly(ethylene glycol) acrylate (PEG-4A) by using cryopolymerization. The cryogels were repeatedly injectable and stretchable, and the addition of PEG-4A improved the robustness and mechanical properties. The cryogels supported human adipose progenitor cell (HWA) and adipose derived mesenchymal stromal cell adhesion, proliferation, and adipogenic differentiation and maturation, regardless of the addition of PEG-4A. The HWA laden cryogels facilitated the co-culture of human umbilical vein endothelial cells (HUVEC) and capillary-like network formation, which in return also promoted adipogenesis. We further combined cryogels with 3D bioprinting to generate handleable adipose constructs with clinically relevant size. 3D bioprinting enabled the deposition of multiple bioinks onto the cryogels. The bioprinted flap-like constructs had an integrated structure without delamination and supported vascularization.

STATEMENT OF SIGNIFICANCE

Adipose tissue engineering is promising for reconstruction of soft tissue defects, and also challenging for restoring and maintaining soft tissue volume and shape, and achieving vascularization and integration. In this study, we fabricated cryogels with mechanical robustness, injectability, and stretchability by using cryopolymerization. The cryogels promoted cell adhesion, proliferation, and adipogenic differentiation and maturation of human adipose progenitor cells and adipose derived mesenchymal stromal cells. Moreover, the cryogels also supported 3D bioprinting on top, forming vascularized adipose constructs. This study demonstrates the potential of the implementation of cryogels for generating volume-stable adipose tissue constructs and provides a strategy to fabricate vascularized flap-like constructs for complex soft tissue regeneration.

Comparison of Candidate Cell Populations for the Recellularization of Decellularized Heart Valves

Introduction

Heart valve tissue engineering may provide improved treatment for valvular heart disease, yet development of a tissue engineered heart valve (TEHV) has been limited by incomplete recellularization of the valve leaflets. In this study, we compare the leaflet recellularization potential of candidate cell populations.

Methods

Four cell populations were tested: bone marrow mononuclear cells (MNC), 5 million bone marrow mesenchymal stem cells (MSC), 10 million bone marrow mesenchymal stem cells (MSC2), and 5 million valve interstitial cells (VIC). Candidate cell populations were seeded onto decellularized heart valves and underwent similar conditioning in a low-flow bioreactor for 2 weeks.

Results

MSC2 valves demonstrated the best recellularization of the interstitial leaflet tissue as well as an appropriate cell phenotype, mechanical properties, and biochemical composition. MSC valves exhibited similar leaflet repopulation, yet had decreased mechanical and biochemical properties. MNC seeding resulted in minimal recellularization of the leaflet, though an additional time point group found cells present after 3 days, which seemed to disappear at 2 weeks. VIC seeding resulted in cell clumping on the leaflet surface and poor recellularization.

Conclusions

The results of this study suggest mesenchymal stem cells are a preferred cell population for TEHV recellularization. Additionally, MSCs demonstrate the ability for repopulation of the distal valve leaflet, which will lead to more complete recellularization of future TEHVs.

Extended bioreactor conditioning of mononuclear cell-seeded heart valve scaffolds

The tissue-engineered heart valve may be the ideal valve replacement option but still must overcome challenges in leaflet recellularization. This study sought to investigate the potential for leaflet matrix restoration and repopulation following mononuclear cell seeding and extended periods of bioreactor conditioning. Human aortic heart valves were seeded with mononuclear cells and conditioned in a pulsatile bioreactor for 3 days, 3 weeks, or 6 weeks. The results of this study determined that a mononuclear cell population can be readily localized within the leaflet tissue in as little as 3 days. Furthermore, as extended bioreactor condition continued to the 3- and 6-week time points, the mesenchymal stem cell subfraction proliferated and appeared to become the predominant cell phenotype. This was evident through positive expression of mesenchymal stem cell markers and no expression of mononuclear cell markers observed by immunohistochemistry in the 3- and 6-week groups. In addition, cells in the 3- and 6-week groups exhibited an up-regulation of mesenchymal stem cell–associated genes (THY1, NT5E, and ITGB1) and a down-regulation of mononuclear cell–associated genes (CD14, ICAM1, and PECAM1) compared to the initial seeded cell population. However, repopulation of the leaflet interstitium was less extensive than anticipated. Valves in the 6-week time point also exhibited retracted leaflets. Thus, while the 3-week bioreactor-conditioning period used in this study may hold some promise, a bioreactor-conditioning period of 6 weeks is not a viable option for clinical translation due to the negative impact on valve performance.

Living nanofiber yarn-based woven biotextiles for tendon tissue engineering using cell tri-culture and mechanical stimulation

Non-woven nanofibrous scaffolds have been developed for tendon graft application by using electrospinning strategies. However, electrospun nanofibrous scaffolds face some obstacles and limitations, including suboptimal scaffold structure, weak tensile and suture-retention strengths, and compact structure for cell infiltration. In this work, a novel nanofibrous, woven biotextile, fabricated based on electrospun nanofiber yarns, was implemented as a tissue engineered tendon scaffold. Based on our modified electrospinning setup, polycaprolactone (PCL) nanofiber yarns were fabricated with reproducible quality, and were further processed into plain-weaving fabrics interlaced with polylactic acid (PLA) multifilaments. Nonwoven nanofibrous PCL meshes with random or aligned fiber structures were generated using typical electrospinning as comparative counterparts. The woven fabrics contained 3D aligned microstructures with significantly larger pore size and obviously enhanced tensile mechanical properties than their nonwoven counterparts. The biological results revealed that cell proliferation and infiltration, along with the expression of tendon-specific genes by human adipose derived mesenchymal stem cells (HADMSC) and human tenocytes (HT), were significantly enhanced on the woven fabrics compared with those on randomly-oriented or aligned nanofiber meshes. Co-cultures of HADMSC with HT or human umbilical vein endothelial cells (HUVEC) on woven fabrics significantly upregulated the functional expression of most tenogenic markers. HADMSC/HT/HUVEC tri-culture on woven fabrics showed the highest upregulation of most tendon-associated markers than all the other mono- and co-culture groups. Furthermore, we conditioned the tri-cultured constructs with dynamic conditioning and demonstrated that dynamic stretch promoted total collagen secretion and tenogenic differentiation. Our nanofiber yarn-based biotextiles have significant potential to be used as engineered scaffolds to synergize the multiple cell interaction and mechanical stimulation for promoting tendon regeneration.

STATEMENT OF SIGNIFICANCE

Tendon grafts are essential for the treatment of various tendon-related conditions due to the inherently poor healing capacity of native tendon tissues. In this study, we combined electrospun nanofiber yarns with textile manufacturing strategies to fabricate nanofibrous woven biotextiles with hierarchical features, aligned fibrous topography, and sufficient mechanical properties as tendon tissue engineered scaffolds. Comparing to traditional electrospun random or aligned meshes, our novel nanofibrous woven fabrics possess strong tensile and suture-retention strengths and larger pore size. We also demonstrated that the incorporation of tendon cells and vascular cells promoted the tenogenic differentiation of the engineered tendon constructs, especially under dynamic stretch. This study not only presents a novel tissue engineered tendon scaffold fabrication technique but also provides a useful strategy to promote tendon differentiation and regeneration.

Prevascularization of 3D printed bone scaffolds by bioactive hydrogels and cell co-culture

Vascularization is a fundamental prerequisite for large bone construct development and remains one of the main challenges of bone tissue engineering. Our current study presents the combination of 3D printing technique with a hydrogel-based prevascularization strategy to generate prevascularized bone constructs. Human adipose derived mesenchymal stem cells (ADMSC) and human umbilical vein endothelial cells (HUVEC) were encapsulated within our bioactive hydrogels, and the effects of culture conditions on in vitro vascularization were determined. We further generated composite constructs by forming 3D printed polycaprolactone/hydroxyapatite scaffolds coated with cell-laden hydrogels and determined how the co-culture affected vascularization and osteogenesis. It was demonstrated that 3D co-cultured ADMSC-HUVEC generated capillary-like networks within the porous 3D printed scaffold. The co-culture systems promoted in vitro vascularization, but had no significant effects on osteogenesis. The prevascularized constructs were subcutaneously implanted into nude mice to evaluate the in vivo vascularization capacity and the functionality of engineered vessels. The hydrogel systems facilitated microvessel and lumen formation and promoted anastomosis of vascular networks of human origin with host murine vasculature. These findings demonstrate the potential of prevascularized 3D printed scaffolds with anatomical shape for the healing of larger bone defects. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1788-1798, 2018.

Effects of Hydroxyapatite and Hypoxia on Chondrogenesis and Hypertrophy in 3D Bioprinted ADMSC Laden Constructs

Hydrogel-based cartilage tissue engineering strategies require the induction and long-term maintenance of adipose derived mesenchymal stem cells (ADMSC) into a stable chondrogenic phenotype. However, ADMSC exhibit the tendency to undergo hypertrophic differentiation, rather than forming permanent hyaline cartilage phenotype changes. This may hinder their implementation in articular cartilage regeneration, but may allow the possibility for bone and bone to soft tissue interface repair. In this study, we examined the effects of hydroxyapatite (HAp) on the chondrogenesis and hypertrophy of ADMSC within bioprinted hyaluronic acid (HA)-based hydrogels. We found that a small amount of HAp (∼10% of polymer concentration) promoted both chondrogenic and hypertrophic differentiation of ADMSC. Increased HAp contents promoted hypertrophic conversion and early osteogenic differentiation of encapsulated ADMSC. Subsequently, ADMSC-laden, stratified constructs with nonmineralized and mineralized layers (i.e., HA based and HA-HAp based) were 3D bioprinted. The constructs were conditioned in chondrogenic medium in either a normoxic or hypoxic environment for 8 weeks to assess the effects of oxygen tension on ADMSC differentiation and interface integration. We further implanted the bioprinted constructs subcutaneously into nude mice for 4 weeks. It was found that hypoxia partially inhibited hypertrophic differentiation by significantly down-regulating the expression of COL10A1, ALP, and MMP13. In addition, hypoxia also suppressed spontaneous calcification of ADMSC and promoted interface integration. This study demonstrates that both HAp content and hypoxia are important to mediate chondrogenesis, hypertrophy, and endochondral ossification of ADMSC. An optimized recipe and condition will allow for 3D bioprinting of multizonal grafts with integrated hard tissue and soft tissue interfaces for the treatment of complex orthopedic defects.

Living nano-micro fibrous woven fabric/hydrogel composite scaffolds for heart valve engineering

Regeneration and repair of injured or diseased heart valves remains a clinical challenge. Tissue engineering provides a promising treatment approach to facilitate living heart valve repair and regeneration. Three-dimensional (3D) biomimetic scaffolds that possess heterogeneous and anisotropic features that approximate those of native heart valve tissue are beneficial to the successful in vitro development of tissue engineered heart valves (TEHV). Here we report the development and characterization of a novel composite scaffold consisting of nano- and micro-scale fibrous woven fabrics and 3D hydrogels by using textile techniques combined with bioactive hydrogel formation. Embedded nano-micro fibrous scaffolds within hydrogel enhanced mechanical strength and physical structural anisotropy of the composite scaffold (similar to native aortic valve leaflets) and also reduced its compaction. We determined that the composite scaffolds supported the growth of human aortic valve interstitial cells (HAVIC), balanced the remodeling of heart valve ECM against shrinkage, and maintained better physiological fibroblastic phenotype in both normal and diseased HAVIC over single materials. These fabricated composite scaffolds enable the engineering of a living heart valve graft with improved anisotropic structure and tissue biomechanics important for maintaining valve cell phenotypes.

STATEMENT OF SIGNIFICANCE

Heart valve-related disease is an important clinical problem, with over 300,000 surgical repairs performed annually. Tissue engineering offers a promising strategy for heart valve repair and regeneration. In this study, we developed and tissue engineered living nano-micro fibrous woven fabric/hydrogel composite scaffolds by using textile technique combined with bioactive hydrogel formation. The novelty of our technique is that the composite scaffolds can mimic physical structure anisotropy and the mechanical strength of natural aortic valve leaflet. Moreover, the composite scaffolds prevented the matrix shrinkage, which is major problem that causes the failure of TEHV, and better maintained physiological fibroblastic phenotype in both normal and diseased HAVIC. This work marks the first report of a combination composite scaffold using 3D hydrogel enhanced by nano-micro fibrous woven fabric, and represents a promising tissue engineering strategy to treat heart valve injury.

Methods for Implant Acceptance and Wound Healing: Material Selection and Implant Location Modulate Macrophage and Fibroblast Phenotypes

This review focuses on materials and methods used to induce phenotypic changes in macrophages and fibroblasts. Herein, we give a brief overview on how changes in macrophages and fibroblasts phenotypes are critical biomarkers for identification of implant acceptance, wound healing effectiveness, and are also essential for evaluating the regenerative capabilities of some hybrid strategies that involve the combination of natural and synthetic materials. The different types of cells present during the host response have been extensively studied for evaluating the reaction to different materials and there are varied material approaches towards fabrication of biocompatible substrates. We discuss how natural and synthetic materials have been used to engineer desirable outcomes in lung, heart, liver, skin, and musculoskeletal implants, and how certain properties such as rigidity, surface shape, and porosity play key roles in the progression of the host response. Several fabrication strategies are discussed to control the phenotype of infiltrating macrophages and fibroblasts: decellularization of scaffolds, surface coatings, implant shape, and pore size apart from biochemical signaling pathways that can inhibit or accelerate unfavorable host responses. It is essential to factor all the different design principles and material fabrication criteria for evaluating the choice of implant materials or regenerative therapeutic strategies.

Fabrication of Aligned Nanofiber Polymer Yarn Networks for Anisotropic Soft Tissue Scaffolds

Nanofibrous scaffolds with defined architectures and anisotropic mechanical properties are attractive for many tissue engineering and regenerative medicine applications. Here, a novel electrospinning system is developed and implemented to fabricate continuous processable uniaxially aligned nanofiber yarns (UANY). UANY were processed into fibrous tissue scaffolds with defined anisotropic material properties using various textile-forming technologies, i.e., braiding, weaving, and knitting techniques. UANY braiding dramatically increased overall stiffness and strength compared to the same number of UANY unbraided. Human adipose derived stem cells (HADSC) cultured on UANY or woven and knitted 3D scaffolds aligned along local fiber direction and were >90% viable throughout 21 days. Importantly, UANY supported biochemical induction of HADSC differentiation toward smooth muscle and osteogenic lineages. Moreover, we integrated an anisotropic woven fiber mesh within a bioactive hydrogel to mimic the complex microstructure and mechanical behavior of valve tissues. Human aortic valve interstitial cells (HAVIC) and human aortic root smooth muscle cells (HASMC) were separately encapsulated within hydrogel/woven fabric composite scaffolds for generating scaffolds with anisotropic biomechanics and valve ECM like microenvironment for heart valve tissue engineering. UANY have great potential as building blocks for generating fiber-shaped tissues or tissue microstructures with complex architectures.

Degradable Chitosan-Collagen Composites Seeded with Cells as Tissue Engineered Heart Valves

BACKGROUND

Degradable collagen-chitosan composite materials have been used to fabricate tissue engineered heart valves. The aims of this study were to demonstrate that the collagen-chitosan composite scaffolds are cytocompatible, and endothelial cells can be differentiated from bone marrow mesenchymal stem cells (BMSCs) when seeded onto the scaffolds. The adhesion and biological activities of the seeded cells were also investigated.

METHODS

Collagen-chitosan composite material was used as the cell matrix, and smooth muscle cells, fibroblasts and BMSCs were used as seed cells. After four weeks of in vitro culture, the smooth muscle cells, fibroblasts, and BMSCs were sequentially seeded into the collagen-chitosan composite material. After four weeks in culture, the cellular density and activity were assessed on segments of the tissue engineered heart valve scaffolds to determine the cell viability and proliferation in the collagen-chitosan composite material.

RESULTS

The tissue engineered heart valves stained positively for both smooth muscle actin and endothelial cell factor VIII, suggesting that the seeded cells were in fact smooth muscle cells, fibroblasts, and endothelial cells. The 6-ketone prostaglandin content, as measured by radioimmunoassay, of the collagen-chitosan cell culture fluid was higher than that of the serum-free medium (P <0.01). Light and electron microscopy showed that the seeded cells had shapes similar to the morphology of smooth muscle cells, fibroblasts, and endothelial cells.

CONCLUSIONS

Endothelial cells can be differentiated from BMSCs when seeded onto the collagen-chitosan composite scaffolds. The seeded cells retained their biological activity after being cultured in vitro and seeded into the collagen-chitosan composite material.

Optimizing Photo-Encapsulation Viability of Heart Valve Cell Types in 3D Printable Composite Hydrogels

Photocrosslinking hydrogel technologies are attractive for the biofabrication of cardiovascular soft tissues, but 3D printing success is dependent on multiple variables. In this study we systematically test variables associated with photocrosslinking hydrogels (photoinitiator type, photoinitiator concentration, and light intensity) for their effects on encapsulated cells in an extrusion 3D printable mixture of methacrylated gelatin/poly-ethylene glycol diacrylate/alginate (MEGEL/PEGDA3350/alginate). The fabrication conditions that produced desired hydrogel mechanical properties were compared against those that optimize aortic valve or mesenchymal stem cell viability. In the 3D hydrogel culture environment and fabrication setting studied, Irgacure can increase hydrogel stiffness with a lower proportional decrease in encapsulated cell viability compared to VA086. Human adipose derived mesenchymal stem cells (HADMSC) survived increasing photoinitiator concentrations in photo-encapsulation conditions better than aortic valve interstitial cells (HAVIC) and aortic valve sinus smooth muscle cells (HASSMC). Within the range of photo-encapsulation fabrication conditions tested with MEGEL/PEGDA/alginate (0.25-1.0% w/v VA086, 0.025-0.1% w/v Irgacure 2959, and 365 nm light intensity 2-136 mW/cm²), the highest viabilities achieved were 95, 93, and 93% live for HASSMC, HAVIC, and HADMSC respectively. These results identify parameter combinations that optimize cell viability during 3D printing for multiple cell types. These results also indicate that general oxidative stress is higher in photocrosslinking conditions that induce lower cell viability. However, suppressing this increase in intracellular oxidative stress did not improve cell viability, which suggests that other stress mechanisms also contribute.

Melatonin reverses flow shear stress-induced injury in bone marrow mesenchymal stem cells via activation of AMP-activated protein kinase signaling

Tissue-engineered heart valves (TEHVs) are a promising treatment for valvular heart disease, although their application is limited by high flow shear stress (FSS). Melatonin has a wide range of physiological functions and is currently under clinical investigation for expanded applications; moreover, extensive protective effects on the cardiovascular system have been reported. In this study, we investigated the protection conferred by melatonin supplementation against FSS-induced injury in bone marrow mesenchymal stem cells (BMSCs) and elucidated the potential mechanism in this process. Melatonin markedly reduced BMSC apoptotic death in a concentration-dependent manner while increasing the levels of transforming growth factor β (TGF-β), basic fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF), platelet-derived growth factor (PDGF) and B-cell lymphoma 2 (Bcl2), and decreasing those of Bcl-2-associated X protein (Bax), p53 upregulated modulator of apoptosis (PUMA), and caspase 3. Notably, melatonin exerted its protective effects by upregulating the phosphorylation of adenosine monophosphate-activated protein kinase (AMPK), which promotes acetyl-CoA carboxylase (ACC) phosphorylation. Further molecular experiments revealed that luzindole, a nonselective antagonist of melatonin receptors, blocked the anti-FSS injury (anti-FSSI) effects of melatonin. Inhibition of AMPK by Compound C also counteracted the protective effects of melatonin, suggesting that melatonin reverses FSSI in BMSCs through the AMPK-dependent pathway. Overall, our findings indicate that melatonin contributes to the amelioration of FSS-induced BMSC injury by activating melatonin receptors and AMPK/ACC signaling. Our findings may provide a basis for the design of more effective strategies that promote the use of TEHCs in patients.

Heart valve regeneration: the need for systems approaches

Tissue-engineered heart valves are promising alternatives to address the limitations of current valve replacements, particularly for growing children. Current heart valve tissue engineering strategies involve the selection of biomaterial scaffolds, cell types, and often in vitro culture conditions aimed at regenerating a valve for implantation and subsequent maturation in vivo. However, identifying optimal combinations of cell sources, biomaterials, and/or bioreactor conditions to produce functional, durable valve tissue remains a challenge. Despite some short-term success in animal models, attempts to recapitulate aspects of the native heart valve environment based on 'best guesses' of a limited number of regulatory factors have not proven effective. Better outcomes for valve tissue regeneration will likely require a systems-level understanding of the relationships between multiple interacting regulatory factors and their effects on cell function and tissue formation. Until recently, conventional culture methods have not allowed for multiple design parameters to be considered at once. Emerging microtechnologies are well suited to systematically probe multiple inputs, in combination, in high throughput and with great precision. When combined with statistical and network systems analyses, these microtechnologies have excellent potential to define multivariate signal-response relationships and reveal key regulatory pathways for robust functional tissue regeneration.

In vivo vascularization of MSC-loaded porous hydroxyapatite constructs coated with VEGF-functionalized collagen/heparin multilayers

Rapid and adequate vascularization is vital to the long-term success of porous orbital enucleation implants. In this study, porous hydroxyapatite (HA) scaffolds coated with vascular endothelial growth factor (VEGF)-functionalized collagen (COL)/heparin (HEP) multilayers (porosity 75%, pore size 316.8 ± 77.1 μm, VEGF dose 3.39 ng/mm³) were fabricated to enhance vascularization by inducing the differentiation of mesenchymal stem cells (MSCs) to endothelial cells. The in vitro immunofluorescence staining, quantitative real-time polymerase chain reaction (qRT-PCR), and western blotting results demonstrated that the expression of the endothelial differentiation markers CD31, Flk-1, and von Willebrand factor (vWF) was significantly increased in the HA/(COL/HEP)₅/VEGF/MSCs group compared with the HA/VEGF/MSCs group. Moreover, the HA/(COL/HEP)₅ scaffolds showed a better entrapment of the MSCs and accelerated cell proliferation. The in vivo assays showed that the number of newly formed vessels within the constructs after 28 d was significantly higher in the HA/(COL/HEP)₅/VEGF/MSCs group (51.9 ± 6.3/mm²) than in the HA (26.7 ± 2.3/mm²) and HA/VEGF/MSCs (38.2 ± 2.4/mm²) groups. The qRT-PCR and western blotting results demonstrated that the HA/(COL/HEP)₅/VEGF/MSCs group also had the highest expression of CD31, Flk-1, and vWF at both the mRNA and protein levels.

Menstrual Blood-Derived Stem Cells: In Vitro and In Vivo Characterization of Functional Effects

Accumulating evidence has demonstrated that menstrual blood stands as a viable source of stem cells. Menstrual blood-derived stem cells (MenSCs) are morphologically and functionally similar to cells directly extracted from the endometrium, and present dual expression of mesenchymal and embryonic cell markers, thus becoming interesting tools for regenerative medicine. Functional reports show higher proliferative and self-renewal capacities than bone marrow-derived stem cells, as well as successful differentiation into hepatocyte-like cells, glial-like cells, endometrial stroma-like cells, among others. Moreover, menstrual blood stem cells may be used with increased efficiency in reprogramming techniques for induced Pluripotent Stem cell (iPS) generation. Experimental studies have shown successful treatment of stroke, colitis, limb ischemia, coronary disease, Duchenne's muscular atrophy and streptozotocin-induced type 1 diabetes animal models with MenSCs. As we envision an off-the-shelf product for cell therapy, cryopreserved MenSCs appear as a feasible clinical product. Clinical applications, although still very limited, have great potential and ongoing studies should be disclosed in the near future.

Pathological Left Ventricular Hypertrophy and Stem Cells: Current Evidence and New Perspectives

Left ventricular hypertrophy (LVH) is a strong predictor of adverse cardiovascular outcomes. It is the result of complex mechanisms that include not only an increase in protein synthesis and cell size but also proliferating cardiac progenitor cells and the influx of bone marrow-derived cells developing into cardiomyocytes. Stem and progenitor cells are known to contribute to the renewal of adult mammalian cardiomyocytes in case of myocardial injury or pressure and volume overload. They are activated in LVH and play a regulatory role in myocardial repair. They have high proliferative potential and secrete numerous cytokines, growth factors, and microRNAs that play important roles in cell differentiation, cardiac remodeling, and neovascularization. They are mobilized in response to either mechanical or chemical stimuli, hormones, or pharmacologic agents. Another important source of progenitor cells is the epicardial layer. It appears that precursor cells migrate from the epicardium to the myocardium in order to interact with myocardial cells. In addition, migratory cells participate in the formation of almost all cardiac structures in myocardial hypertrophy. Although the pathophysiological mechanisms are still obscure and further studies are required, their properties may open the door to regenerative cell therapy for the prevention of adverse remodeling.

Tissue Engineering for Pediatric Applications

Severe birth defects occur in ∼ 2-3% of live-born infants and are a leading cause of death in the young. Structural malformations can occur in just about any major organ system and often their causes are unknown. The pediatric population presents a unique set of opportunities to the field of tissue engineering and regenerative medicine (TERM). Infants and young children have significantly greater regenerative capacity than adults, which could be leveraged in TERM strategies. Children also arguably stand to benefit the most from TERM. Although the lack of growth potential and relatively short life span of synthetic materials may be suitable for adults, it is unacceptable for children. Furthermore, given that there is a particular scarcity of pediatric donor organs, the need for living functional tissue replacements that can grow with the child is quite evident. There is enormous potential for the TERM community to address the needs of the pediatric population.