Microvascular resistance reserve before and after PCI: A serial FFR and [15O] H2O PET study

BACKGROUND AND AIMS

Microvascular Resistance Reserve (MRR) has recently been introduced as a microvasculature-specific index and hypothesized to be independent of coronary stenosis. The aim of this study was to investigate the change of MRR after percutaneous coronary intervention (PCI).

METHODS

In this post-hoc analysis from the PACIFC trials, symptomatic patients underwent [15O]H2O positron emission tomography (PET) and invasive fractional flow reserve (FFR) before and after revascularization. Coronary flow reserve (CFR) from PET and invasive FFR were used to calculate MRR.

RESULTS

Among 52 patients (87 % male, age 59.4 ± 9.4 years), 61 vessels with a median FFR of 0.71 (95 % confidence interval: 0.55 to 0.74) and a mean MRR of 3.80 ± 1.23 were included. Following PCI, FFR, hyperemic myocardial blood flow (hMBF) and CFR increased significantly (all p-values ≤0.001). MRR remained unchanged after PCI (3.80 ± 1.23 before PCI versus 3.60 ± 0.97 after PCI; p=0.23). In vessels with a pre-PCI, FFR ≤0.70 pre- and post-PCI MRR were 3.90 ± 1.30 and 3.73 ± 1.14 (p=0.56), respectively. Similar findings were observed for vessels with a FFR between 0.71 and 0.80 (pre-PCI MRR 3.70 ± 1.17 vs. post PCI MRR 3.48 ± 0.76, p=0.19).

CONCLUSIONS

Our study indicates that MRR, assessed using a hybrid approach of PET and invasive FFR, is independent of the severity of epicardial stenosis. These findings suggest that MRR is a microvasculature-specific parameter.

Beyond Coronary Artery Disease: Assessing the Microcirculation

Ischemic heart disease (IHD) affects more than 20 million adults in the United States. Although classically attributed to atherosclerosis of the epicardial coronary arteries, nearly half of patients with stable angina and IHD who undergo invasive coronary angiography do not have obstructive epicardial coronary artery disease. Ischemia with nonobstructive coronary arteries is frequently caused by microvascular angina with underlying coronary microvascular dysfunction (CMD). Greater understanding the pathophysiology, diagnosis, and treatment of CMD holds promise to improve clinical outcomes of patients with ischemic heart disease.

Optimization of Absolute Coronary Blood Flow Measurements to Assess Microvascular Function: In Vivo Validation of Hyperemia and Higher Infusion Speeds

BACKGROUND

Reliable assessment of coronary microvascular function is essential. Techniques to measure absolute coronary blood flow are promising but need validation. The objectives of this study were: first, to validate the potential of saline infusion to generate maximum hyperemia in vivo. Second, to validate absolute coronary blood flow measured with continuous coronary thermodilution at high (40-50 mL/min) infusion speeds and asses its safety.

METHODS

Fourteen closed-chest sheep underwent absolute coronary blood flow measurements with increasing saline infusion speeds at different dosages under general anesthesia. An additional 7 open-chest sheep underwent these measurements with epicardial Doppler flow probes. Coronary flows were compared with reactive hyperemia after 45 s of coronary occlusion.

RESULTS

Twenty milliliters per minute of saline infusion induced a significantly lower hyperemic coronary flow (140 versus 191 mL/min; P=0.0165), lower coronary flow reserve (1.82 versus 3.21; P≤0.0001), and higher coronary resistance (655 versus 422 woods units; P=0.0053) than coronary occlusion. On the other hand, 30 mL/min of saline infusion resulted in hyperemic coronary flow (196 versus 192 mL/min; P=0.8292), coronary flow reserve (2.77 versus 3.21; P=0.1107), and coronary resistance (415 versus 422 woods units; P=0.9181) that were not different from coronary occlusion. Hyperemic coronary flow was 40.7% with 5 mL/min, 40.8% with 10 mL/min, 73.1% with 20 mL/min, 102.3% with 30 mL/min, 99.0% with 40 mL/min, and 98.0% with 50 mL/min of saline infusion when compared with postocclusive hyperemic flow. There was a significant bias toward flow overestimation (Bland-Altman: bias±SD, -73.09±30.52; 95% limits of agreement, -132.9 to -13.27) with 40 to 50 mL/min of saline. Occasionally, ischemic changes resulted in ventricular fibrillation (9.5% with 50 mL/min) at higher infusion rates.

CONCLUSIONS

Continuous saline infusion of 30 mL/min but not 20 mL/min induced maximal hyperemia. Absolute coronary blood flow measured with saline infusion speeds of 40 to 50 mL/min was not accurate and not safe.

Mixing properties of coronary infusion catheters assessed by in vitro experiments and computational fluid dynamics

Aims

Continuous infusion thermodilution is an established technique for the assessment of absolute coronary blood flow and microvascular resistance due to its proven accuracy and reproducibility. However, for this technique to yield reliable measurements, direct and homogenous mixing of injected saline and blood is mandatory. This study aimed to assess and compare the mixing properties of two different microcatheters, namely the Rayflow® (with sideholes for infusion) and the Finecross® catheter (single end-hole for infusion), which are commonly used in the catheterization laboratory.

Methods and results

The study employed three different methods to evaluate the mixing properties of the catheters. Firstly, a qualitative assessment of mixing was performed using ink injections in an in vitro bench model of a coronary artery. Secondly, in analogy to the human catheterization laboratory, mixing properties over the length of the coronary artery were assessed semi-quantitatively by temperature measurements in the bench model. Lastly, a quantitative assessment was performed by 3D computational fluid dynamics, where the standard deviation and entropy ratio of the temperature over the cross-section in the coronary artery model were calculated for both catheters.

Conclusion

All three evaluation methods demonstrated that the Rayflow catheter's specific design leads to a more optimal, homogeneous mixture of blood and saline over both the cross-section and length of a coronary vessel, as compared with the standard end-hole catheter.

Diagnostic and prognostic value of angiography-derived index of microvascular resistance: a systematic review and meta-analysis

Background

The angiography-derived index of microvascular resistance (A-IMR) is a novel tool for diagnosing coronary microvascular dysfunction (CMD) addressing limitation of unavailability. However, the clinical value of A-IMR remains controversial.

Methods

A systematic review and meta-analysis was conducted. PubMed, EMBASE, Cochrane Library and Web of Science were searched for relevant studies. Studies that reported estimates of A-IMR's diagnostic accuracy (with thermodilution-based IMR as the reference test) and/or predictions of adverse cardiovascular events were selected. Pooled sensitivity, specificity, area under the summary receiver operating characteristic curve (sROC) were calculated to measure diagnostic performance; pooled hazard/risk ratio (HR/RR) and 95% confidence interval (95% CI) of major adverse cardiovascular events (MACE) or other independent adverse events were calculated to measure prognostic effect. This study was registered with PROSPERO (CRD42023451884).

Results

A total of 12 diagnostic studies pooling 1,642 vessels and 12 prognostic studies pooling 2,790 individuals were included. A-IMR yielded an area under sROC of 0.93 (95% CI: 0.91, 0.95), a pooled sensitivity of 0.85 (95% CI: 0.79, 0.89) and a pooled specificity of 0.89 (95% CI: 0.83, 0.93) for the diagnosis of CMD. CMD diagnosed using A-IMR was associated with higher risks of MACE (HR, 2.73, 95% CI: 2.16, 3.45), CV death (RR, 2.39, 95% CI: 1.49, 3.82) and heart failure hospitalization (HR, 2.30, 95% CI: 1.53, 3.45).

Conclusion

A-IMR demonstrated high diagnostic accuracy for CMD and showed a strong prognostic capability in predicting the risk of adverse CV outcomes.

Systematic Review Registration

https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42023451884, PROSPERO (CRD42023451884).

Impact of vessel volume on thermodilution measurements in patients with coronary microvascular dysfunction

BACKGROUND

Two invasive methods are available to estimate microvascular resistance: bolus and continuous thermodilution. Comparative studies have revealed a lack of concordance between measurements of microvascular resistance obtained through these techniques.

AIMS

This study aimed to examine the influence of vessel volume on bolus thermodilution measurements.

METHODS

We prospectively included patients with angina with non-obstructive coronary arteries (ANOCA) undergoing bolus and continuous thermodilution assessments. All patients underwent coronary CT angiography to extract vessel volume. Coronary microvascular dysfunction was defined as coronary flow reserve (CFR) < 2.0. Measurements of absolute microvascular resistance (in Woods units) and index of microvascular resistance (IMR) were compared before and after volumetric adjustment.

RESULTS

Overall, 94 patients with ANOCA were included in this study. The mean age was 64.7 ± 10.8 years, 48% were female, and 19% had diabetes. The prevalence of CMD was 16% based on bolus thermodilution, while continuous thermodilution yielded a prevalence of 27% (Cohen's Kappa 0.44, 95% CI 0.23-0.65). There was no correlation in microvascular resistance between techniques (r = 0.17, 95% CI -0.04 to 0.36, p = 0.104). The adjustment of IMR by vessel volume significantly increased the agreement with absolute microvascular resistance derived from continuous thermodilution (r = 0.48, 95% CI 0.31-0.63, p < 0.001).

CONCLUSIONS

In patients with ANOCA, invasive methods based on coronary thermodilution yielded conflicting results for the assessment of CMD. Adjusting IMR with vessel volume improved the agreement with continuous thermodilution for the assessment of microvascular resistance. These findings strongly suggest the importance of considering vessel volume when interpreting bolus thermodilution assessment.

Comparison of bolus versus continuous thermodilution derived indices of microvascular dysfunction in revascularized coronary syndromes

Background

The assessment of coronary microvascular dysfunction (CMD) using invasive methods is a field of growing interest, however the preferred method remains debated. Bolus and continuous thermodilution are commonly used methods, but weak agreement has been observed in patients with angina with non-obstructive coronary arteries (ANOCA). This study examined their agreement in revascularized acute coronary syndromes (ACS) and chronic coronary syndromes (CCS) patients.

Objective

To compare bolus thermodilution and continuous thermodilution indices of CMD in revascularized ACS and CCS patients and assess their diagnostic agreement at pre-defined cut-off points.

Methods

Patients from two centers underwent paired bolus and continuous thermodilution assessments after revascularization. CMD indices were compared between the two methods and their agreements at binary cut-off points were assessed.

Results

Ninety-six patients and 116 vessels were included. The mean age was 64 ± 11 years, and 20 (21 %) were female. Overall, weak correlations were observed between the Index of Microcirculatory Resistance (IMR) and continuous thermodilution microvascular resistance (Rµ) (rho = 0.30p = 0.001). The median coronary flow reserve (CFR) from continuous thermodilution (CFRcont) and bolus thermodilution (CFRbolus) were 2.19 (1.76-2.67) and 2.55 (1.50-3.58), respectively (p < 0.001). Weak correlation and agreement were observed between CFRcont and CFRbolus (rho = 0.37, p < 0.001, ICC 0.228 [0.055-0.389]). When assessed at CFR cut-off values of 2.0 and 2.5, the methods disagreed in 41 (35 %) and 45 (39 %) of cases, respectively.

Conclusions

There is a significant difference and weak agreement between bolus and continuous thermodilution-derived indices, which must be considered when diagnosing CMD in ACS and CCS patients.

Monolithic Integration of Ultraslim Flow Sensor and Medical Guidewire by Laser Filament Scanning Sintering for In Vivo Diagnostics of Cardiovascular Diseases

In this study, an ultraslim thermal flow sensor system integrated onto a 340 μm diameter medical guidewire was developed using a laser filament scanning sintering method for the early diagnosis of cardiovascular diseases. The proposed system is a calorimetric-based micro thermal flow sensor comprising a microheater and two thermistors. Prior to fabrication, the sensor design was optimized through flow simulation, and the patterned sensor was successfully implemented on a thin and curved surface of the medical guidewire using a laser patterning method with Ag nanoparticles. The performance of the ultraslim thermal flow sensor-on-guidewire system (SoW) was evaluated under pulsatile flow by using an artificial heartbeat simulator with differentially induced fluid flow velocities of up to 60 cm/s. The resulting electrical signals generated by the temperature difference between the two thermistors caused by the fluid flow were measured across different velocity ranges. Based on the obtained data, a calibration curve was derived to establish the relationship between the fluid velocity and the sensor output voltage. Furthermore, the SoW was tested on living animals, whereby the measured blood flow velocities were 60-90 cm/s in the left coronary artery of pigs. This research demonstrates the potential of ultraslim microsensors, such as the developed thermal flow sensor system, for various industries, particularly in the medical field.

Measuring Absolute Coronary Flow and Microvascular Resistance by Thermodilution: JACC Review Topic of the Week

Diagnosing coronary microvascular dysfunction remains challenging, primarily due to the lack of direct measurements of absolute coronary blood flow (Q) and microvascular resistance (Rμ). However, there has been recent progress with the development and validation of continuous intracoronary thermodilution, which offers a simplified and validated approach for clinical use. This technique enables direct quantification of Q and Rμ, leading to precise and accurate evaluation of the coronary microcirculation. To ensure consistent and reliable results, it is crucial to follow a standardized protocol when performing continuous intracoronary thermodilution measurements. This document aims to summarize the principles of thermodilution-derived absolute coronary flow measurements and propose a standardized method for conducting these assessments. The proposed standardization serves as a guide to ensure the best practice of the method, enhancing the clinical assessment of the coronary microcirculation.

Beyond Coronary Artery Disease: Assessing the Microcirculation

Ischemic heart disease (IHD) affects more than 20 million adults in the United States. Although classically attributed to atherosclerosis of the epicardial coronary arteries, nearly half of patients with stable angina and IHD who undergo invasive coronary angiography do not have obstructive epicardial coronary artery disease. Ischemia with nonobstructive coronary arteries is frequently caused by microvascular angina with underlying coronary microvascular dysfunction (CMD). Greater understanding the pathophysiology, diagnosis, and treatment of CMD holds promise to improve clinical outcomes of patients with ischemic heart disease.

Assessing the Impact of Prolonged Averaging of Coronary Continuous Thermodilution Traces

Continuous Thermodilution is a novel method of quantifying coronary flow (Q) in mL/min. To account for variability of Q within the cardiac cycle, the trace is smoothened with a 2 s moving average filter. This can sometimes be ineffective due to significant heart rate variability, ventricular extrasystoles, and deep inspiration, resulting in a fluctuating temperature trace and ambiguity in the location of the "steady state". This study aims to assess whether a longer moving average filter would smoothen any fluctuations within the continuous thermodilution traces resulting in improved interpretability and reproducibility on a test-retest basis. Patients with ANOCA underwent repeat continuous thermodilution measurements. Analysis of traces were performed at averages of 10, 15, and 20 s to determine the maximum acceptable average. The maximum acceptable average was subsequently applied as a moving average filter and the traces were re-analysed to assess the practical consequences of a longer moving average. Reproducibility was then assessed and compared to a 2 s moving average. Of the averages tested, only 10 s met the criteria for acceptance. When the data was reanalysed with a 10 s moving average filter, there was no significant improvement in reproducibility, however, it resulted in a 12% diagnostic mismatch. Applying a longer moving average filter to continuous thermodilution data does not improve reproducibility. Furthermore, it results in a loss of fidelity on the traces, and a 12% diagnostic mismatch. Overall, current practice should be maintained.

Coronary Microvascular Dysfunction in Patients With Heart Failure: Characterization of Patterns in HFrEF Versus HFpEF

BACKGROUND

Coronary microvascular dysfunction (CMD) is involved in heart failure (HF) onset and progression, independently of HF phenotype and obstructive coronary artery disease. Invasive assessment of CMD might provide insights into phenotyping and prognosis of patients with HF. We aimed to assess absolute coronary flow, absolute microvascular resistance, myocardial perfusion, coronary flow reserve, and microvascular resistance reserve in patients with HF with preserved ejection fraction and HF with reduced ejection fraction (HFrEF).

METHODS

Single-center, prospective study of 56 consecutive patients with de novo HF with nonobstructive coronary artery disease divided into HF with preserved ejection fraction (n=21) and HFrEF (n=35). CMD was invasively assessed by continuous intracoronary thermodilution and defined as coronary flow reserve <2.5. Left ventricular and left anterior descending artery-related myocardial mass was quantified by echocardiography and coronary computed tomography angiography. Myocardial perfusion (mL/min per g) was calculated as the ratio between absolute coronary flow and left anterior descending artery-related mass.

RESULTS

Patients with HFrEF showed a higher left ventricular and left anterior descending artery-related myocardial mass compared with HF with preserved ejection fraction (P<0.010). Overall, 52% of the study population had CMD, with a similar prevalence between the 2 groups. In HFrEF, CMD was characterized by lower absolute microvascular resistance and higher absolute coronary flow at rest (functional CMD; P=0.002). CMD was an independent predictor of a lower rate of left ventricular reverse remodeling at follow-up. In patients with HF with preserved ejection fraction, CMD was mainly due to higher absolute microvascular resistance and lower absolute coronary flow during hyperemia (structural CMD; P≤0.030).

CONCLUSIONS

Continuous intracoronary thermodilution allows the definition and characterization of patterns with distinct CMD in patients with HF and could identify patients with HFrEF with a higher rate of left ventricular reverse remodeling at follow-up.

Invasive Assessment of Coronary Microcirculation: A State-of-the-Art Review

A significant proportion of patients presenting with signs and symptoms of myocardial ischemia have no "significant" epicardial disease; thereby, the assessment of coronary microcirculation gained an important role in improving diagnosis and guiding therapy. In fact, coronary microvascular dysfunction (CMD) could be found in a large proportion of these patients, supporting both symptoms and signs of myocardial ischemia. However, CMD represents a diagnostic challenge for two main reasons: (1) the small dimension of the coronary microvasculature prevents direct angiographic visualization, and (2) despite the availability of specific diagnostic tools, they remain invasive and underused in the current clinical practice. For these reasons, CMD remains underdiagnosed, and most of the patients remain with no specific treatment and quality-of-life-limiting symptoms. Of note, recent evidence suggests that a "full physiology" approach for the assessment of the whole coronary vasculature may offer a significant benefit in terms of symptom improvement among patients presenting with ischemia and non-obstructive coronary artery disease. We analyze the pathophysiology of coronary microvascular dysfunction, providing the readers with a guide for the invasive assessment of coronary microcirculation, together with the available evidence supporting its use in clinical practice.

Chinese expert consensus on the diagnosis and treatment of coronary microvascular diseases (2023 Edition)

Since the four working groups of the Chinese Society of Cardiology issued first expert consensus on coronary microvascular diseases (CMVD) in 2017, international consensus documents on CMVD have increased rapidly. Although some of these documents made preliminary recommendations for the diagnosis and treatment of CMVD, they did not provide classification of recommendations and levels of evidence. In order to summarize recent progress in the field of CMVD, standardize the methods and procedures of diagnosis and treatment, and identify the scientific questions for future research, the four working groups of the Chinese Society of Cardiology updated the 2017 version of the Chinese expert consensus on CMVD and adopted a series of measures to ensure the quality of this document. The current consensus has raised a new classification of CMVD, summarized new epidemiological findings for different types of CMVD, analyzed key pathological and molecular mechanisms, evaluated classical and novel diagnostic technologies, recommended diagnostic pathways and criteria, and therapeutic strategies and medications, for patients with CMVD. In view of the current progress and knowledge gaps of CMVD, future directions were proposed. It is hoped that this expert consensus will further expedite the research progress of CMVD in both basic and clinical scenarios.

82Rb and [15O]H2O myocardial perfusion PET imaging: a prospective head to head comparison

BACKGROUND

82Rb PET and [15O]H2O PET are both validated tracers for myocardical perfusion imaging but have not previously been compared clinically. During our site's transition from 82Rb to [15O]H2O PET, we performed a head-to-head comparison in a mixed population with suspected ischemic heart disease.

METHODS

A total of 37 patients referred for perfusion imaging due to suspicion of coronary stenosis were examined with both 82Rb and [15O]H2O PET on the same day in rest and during adenosine-induced stress. The exams were rated by two blinded readers as normal, regional ischemia, globally reduced myocardial perfusion, or myocardial scarring. For [15O]H2O PET, regional ischemia was defined as two neighboring segments with average stress perfusion ≤ 2.3 mL/(min·g). Further, we evaluated a total perfusion deficit (TPD) of ≥ 10% as a more conservative marker of ischemia.

RESULTS

[15O]H2O PET identified more patients with regional ischemia: 17(46%) vs 9(24%), agreement: 59% corresponding to a Cohen's kappa of .31 [95%CI .08-.53], (P < .001). Using the more conservative TPD ≥ 10%, the agreement increased to 86% corresponding to a kappa of .62 [95%CI .33-.92], (P = .001). For the subgroup of patients with no known heart disease (n = 18), the agreement was 94%. Interrater agreement was 95% corresponding to a kappa of .89 [95%CI .74-1.00] (P < .001).

CONCLUSIONS

In clinical transition from 82Rb to [15O]H2O PET, it is important to take into account the higher frequency of patients with regional ischemia detected by [15O]H2O PET.

Continuous vs Bolus Thermodilution to Assess Microvascular Resistance Reserve

BACKGROUND

Coronary flow reserve (CFR) and microvascular resistance reserve (MRR) can, in principle, be derived by any method assessing coronary flow.

OBJECTIVES

The aim of this study was to compare CFR and MRR as derived by continuous (CFRcont and MRRcont) and bolus thermodilution (CFRbolus and MRRbolus).

METHODS

A total of 175 patients with chest pain and nonobstructive coronary artery disease were studied. Bolus and continuous thermodilution measurements were performed in the left anterior descending coronary artery. MRR was calculated as the ratio of CFR to fractional flow reserve and corrected for changes in systemic pressure. In 102 patients, bolus and continuous thermodilution measurements were performed in duplicate to assess test-retest reliability.

RESULTS

Mean CFRbolus was higher than CFRcont (3.47 ± 1.42 and 2.67 ± 0.81 [P < 0.001], mean difference 0.80, upper limit of agreement 3.92, lower limit of agreement -2.32). Mean MRRbolus was also higher than MRRcont (4.40 ± 1.99 and 3.22 ± 1.02 [P < 0.001], mean difference 1.2, upper limit of agreement 5.08, lower limit of agreement -2.71). The correlation between CFR and MRR values obtained using both methods was significant but weak (CFR, r = 0.28 [95% CI: 0.14-0.41]; MRR, r = 0.26 [95% CI: 0.16-0.39]; P < 0.001 for both). The precision of both CFR and MRR was higher when assessed using continuous thermodilution compared with bolus thermodilution (repeatability coefficients of 0.89 and 2.79 for CFRcont and CFRbolus, respectively, and 1.01 and 3.05 for MRRcont and MRRbolus, respectively).

CONCLUSIONS

Compared with bolus thermodilution, continuous thermodilution yields lower values of CFR and MRR accompanied by an almost 3-fold reduction of the variability in the measured results.

Continuous Versus Bolus Thermodilution-Derived Coronary Flow Reserve and Microvascular Resistance Reserve and Their Association With Angina and Quality of Life in Patients With Angina and Nonobstructive Coronaries: A Head-to-Head Comparison

Background Coronary flow reserve (CFR) and microvascular resistance reserve (MRR) are physiological parameters to assess coronary microvascular dysfunction. CFR and MRR can be assessed using bolus or continuous thermodilution, and the correlation between these methods has not been clarified. Furthermore, their association with angina and quality of life is unknown. Methods and Results In total, 246 consecutive patients with angina and nonobstructive coronary arteries from the multicenter Netherlands Registry of Invasive Coronary Vasomotor Function Testing (NL-CFT) were investigated. The 36-item Short Form Health Survey Quality of Life and Seattle Angina questionnaires were completed by 153 patients before the invasive measurements. CFR and MRR were measured consecutively with bolus and continuous thermodilution. Mean continuous thermodilution-derived coronary flow reserve (CFRabs) was significantly lower than mean bolus thermodilution-derived coronary flow reserve (CFRbolus) (2.6±1.0 versus 3.5±1.8; P<0.001), with a modest correlation (ρ=0.305; P<0.001). Mean continuous thermodilution-derived microvascular resistance reserve (MRRabs) was also significantly lower than mean bolus thermodilution-derived MRR (MRRbolus) (3.1±1.1 versus 4.2±2.5; P<0.001), with a weak correlation (ρ=0.280; P<0.001). CFRbolus and MRRbolus showed no correlation with any of the angina and quality of life domains, whereas CFRabs and MRRabs showed a significant correlation with physical limitation (P=0.005, P=0.009, respectively) and health (P=0.026, P=0.012). In a subanalysis in patients in whom spasm was excluded, the correlation further improved (MRRabs versus physical limitation: ρ=0.363; P=0.041, MRRabs versus physical health: ρ=0.482; P=0.004). No association with angina frequency and stability was found. Conclusions Absolute flow measurements using continuous thermodilution to calculate CFRabs and MRRabs weakly correlate with, and are lower than, the surrogates CFRbolus and MRRbolus. Absolute flow parameters showed a relationship with physical complaints. No relationship with angina frequency and stability was found.

Coronary Vascular (DYS) Function and Invasive Physiology Assessment: Insights into Bolus and Continuous Thermodilution Methods

A considerable number of patients with angina or myocardial ischemia have no significant coronary artery disease on invasive angiography. In recent years, several steps towards a better comprehension of the pathophysiology of these conditions, angina or ischemia with non-obstructive coronary arteries (ANOCA/INOCA), have been made. Nevertheless, several gaps in knowledge still remain. This review is intended to provide a comprehensive overview of ANOCA and INOCA, with a particular focus on pathophysiology, recent diagnostic innovations, gaps in knowledge and treatment modalities.

Reproducibility of bolus versus continuous thermodilution for assessment of coronary microvascular function in patients with ANOCA

BACKGROUND

A bolus thermodilution-derived index of microcirculatory resistance (IMR) has emerged as the standard for assessing coronary microvascular dysfunction (CMD). Continuous thermodilution has recently been introduced as a tool to quantify absolute coronary flow and microvascular resistance directly. Microvascular resistance reserve (MRR) derived from continuous thermodilution has been proposed as a novel metric of microvascular function, which is independent of epicardial stenoses and myocardial mass.

AIMS

We aimed to assess the reproducibility of bolus and continuous thermodilution in assessing coronary microvascular function.

METHODS

Patients with angina and non-obstructive coronary artery disease (ANOCA) at angiography were prospectively enrolled. Bolus and continuous intracoronary thermodilution measurements were obtained in duplicate in the left anterior descending artery (LAD). Patients were randomly assigned in a 1:1 ratio to undergo either bolus thermodilution first or continuous thermodilution first.

RESULTS

A total of 102 patients were enrolled. The mean fractional flow reserve (FFR) was 0.86±0.06. Coronary flow reserve (CFR) calculated with continuous thermodilution (CFRcont) was significantly lower than bolus thermodilution-derived CFR (CFRbolus; 2.63±0.65 vs 3.29±1.17; p<0.001). CFRcont showed a higher reproducibility than CFRbolus (variability: 12.7±10.4% continuous vs 31.26±24.85% bolus; p<0.001). MRR showed a higher reproducibility than IMR (variability 12.4±10.1% continuous vs 24.2±19.3% bolus; p<0.001). No correlation was found between MRR and IMR (r=0.1, 95% confidence interval: -0.09 to 0.29; p=0.305).

CONCLUSIONS

In the assessment of coronary microvascular function, continuous thermodilution demonstrated significantly less variability on repeated measurements than bolus thermodilution.

Potential value of saline-induced Pd/Pa ratio in patients with coronary artery stenosis

Background

Fractional flow reserve (FFR) is the current gold standard for identifying myocardial ischemia in individuals with coronary artery stenosis. However, FFR is not penetrated as much worldwide due to time consumption, costs associated with adenosine, FFR-related discomfort, and complications. Resting physiological indexes may be widely accepted alternatives to FFR, while the discrepancies with FFR were found in up to 20% of lesions. The saline-induced Pd/Pa ratio (SPR) is a new simplified option for evaluating coronary stenosis. However, the clinical implication of SPR remains unclear.

Objectives

In the present study, we aimed to compare the accuracies of SPR and resting full-cycle ratio (RFR) and to investigate the incremental value of SPR in clinical practice.

Methods

In this multicenter prospective study, 112 coronary lesions (105 patients) were evaluated by SPR, RFR, and FFR.

Results

The overall median age was 71 years, and 84.8% were men. SPR was correlated more strongly with FFR than with RFR (r = 0.874 vs. 0.713, respectively; p < 0.001). Using FFR < 0.80 as the reference standard variable, the area under the receiver-operating characteristic (ROC) curve for SPR was superior to that of RFR (0.932 vs. 0.840, respectively; p = 0.009).

Conclusion

Saline-induced Pd/Pa ratio predicted FFR more accurately than RFR. SPR could be an alternative method for evaluating coronary artery stenosis and further investigation including elucidation of the mechanism of SPR is needed (225 words).

Beyond Coronary Artery Disease: Assessing the Microcirculation

Ischemic heart disease (IHD) affects more than 20 million adults in the United States. Although classically attributed to atherosclerosis of the epicardial coronary arteries, nearly half of patients with stable angina and IHD who undergo invasive coronary angiography do not have obstructive epicardial coronary artery disease. Ischemia with nonobstructive coronary arteries is frequently caused by microvascular angina with underlying coronary microvascular dysfunction (CMD). Greater understanding the pathophysiology, diagnosis, and treatment of CMD holds promise to improve clinical outcomes of patients with ischemic heart disease.

Invasive coronary physiology in patients with angina and non-obstructive coronary artery disease: a consensus document from the coronary microvascular dysfunction workstream of the British Heart Foundation/National Institute for Health Research Partnership

Nearly half of all patients with angina have non-obstructive coronary artery disease (ANOCA); this is an umbrella term comprising heterogeneous vascular disorders, each with disparate pathophysiology and prognosis. Approximately two-thirds of patients with ANOCA have coronary microvascular disease (CMD). CMD can be secondary to architectural changes within the microcirculation or secondary to vasomotor dysfunction. An inability of the coronary vasculature to augment blood flow in response to heightened myocardial demand is defined as an impaired coronary flow reserve (CFR), which can be measured non-invasively, using imaging, or invasively during cardiac catheterisation. Impaired CFR is associated with myocardial ischaemia and adverse cardiovascular outcomes.The CMD workstream is part of the cardiovascular partnership between the British Heart Foundation and The National Institute for Health Research in the UK and comprises specialist cardiac centres with expertise in coronary physiology assessment. This document outlines the two main modalities (thermodilution and Doppler techniques) for estimation of coronary flow, vasomotor testing using acetylcholine, and outlines a standard operating procedure that could be considered for adoption by national networks. Accurate and timely disease characterisation of patients with ANOCA will enable clinicians to tailor therapy according to their patients' coronary physiology. This has been shown to improve patients' quality of life and may lead to improved cardiovascular outcomes in the long term.

Contemporary and future invasive coronary vasomotor function testing and treatment in patients with ischaemia with no obstructive coronary arteries

In the current review, we emphasize the importance of diagnostics and therapy in patients with ischaemia with no obstructive coronary arteries (INOCA). The importance of the diagnostic coronary function test (CFT) procedure is described, including future components including angiography-derived physiology and invasive continuous thermodilution. Furthermore, the main components of treatment are discussed. Future directions include the national registration ensuring a high quality of INOCA care, besides a potential source to improve our understanding of pathophysiology in the various phenotypes of coronary vascular dysfunction, the diagnostic CFT procedure, and treatment.

Angiography derived assessment of the coronary microcirculation: is it ready for prime time?

INTRODUCTION

Non-obstructive coronary arteries (NOCA) are present in 39.7% to 62.4% of patients who undergo elective angiography. Coronary microcirculation (<400 µm) is not visible on angiography therefore functional assessment, invasive or non-invasive plays a prior role to help provide a more personalized diagnosis of angina.

AREA COVERED

In this review, we revise the pathophysiology, clinical importance and invasive assessment of the coronary microcirculation, and discuss angiography-derived indices of microvascular resistance. A comprehensive literature review over four decades is also undertaken.

EXPERT OPINION

The coronary microvasculature plays an important role in flow autoregulation and metabolic regulation. Invasive assessment of microvascular resistance is a validated modality with independent prognostic value, nevertheless, its routine application is hampered by the requirement of intravascular instrumentation and hyperaemic agents. The angiography-derived index of microvascular resistance has emerged as a promising surrogate in pilot studies, however, more data are needed to validate and compare the diagnostic and prognostic accuracy of different equations as well as to illustrate the relationship between angiography-derived parameters for epicardial coronary arteries and those for the microvasculature.

The Complementary Value of Absolute Coronary Flow in the Assessment of Patients with Ischaemic Heart Disease

Fractional flow reserve (FFR) is the current gold-standard invasive assessment of coronary artery disease (CAD). FFR reports coronary blood flow (CBF) as a fraction of a hypothetical and unknown normal value. Although used routinely to diagnose CAD and guide treatment, how accurately FFR predicts actual CBF changes remains unknown. Here we compared fractional CBF with the absolute CBF (aCBF in mL/min), measured with a computational method during standard angiography and pressure-wire assessment, on 203 diseased arteries (143 patients). We found a substantial correlation between the two measurements (r 0.89, Cohen’s Kappa 0.71). Concordance between fractional and absolute CBF reduction was high when FFR was >0.80 (91%), but reduced when FFR was ≤0.80 (81%), 0.70-0.80 (68%) and, particularly 0.75-0.80 (62%). Discordance was associated with coronary microvascular resistance, vessel diameter and mass of myocardium subtended, all factors to which FFR is agnostic. Assessment of aCBF complements FFR, and may be valuable to assess CBF, particularly in cases within the FFR ‘grey-zone’.

Angina with coronary microvascular dysfunction and its physiological assessment: a review with cases

Imagine that it is possible to know, the actual coronary blood flow. Would this not remove any doubt, if a chest pain is the heart's fault?

Invasive Assessment of Coronary Microvascular Function

The critical role of the coronary microvascular compartment and its invasive functional assessment has become apparent in light of the significant proportion of patients presenting signs and symptoms of myocardial ischemia, despite the absence of epicardial disease, or after the adequate treatment of it. However, coronary microvascular dysfunction (CMD) represents a diagnostic challenge because of the small dimensions of the coronary microvasculature, which prevents direct angiographic visualization. Several diagnostic tools are now available for the invasive assessment of the coronary microvascular function, which, in association with the physiological indices used to investigate the epicardial department, may provide a comprehensive evaluation of the coronary circulation as a whole. Recent evidence suggests that the physiology-guided management of CMD, although apparently costly and time-consuming, may offer a net clinical benefit in terms of symptom improvement among patients with angina and ischemic heart disease. However, despite the results of several observational studies, the prognostic effect of the physiology-driven management of CMD within this population is currently a matter of debate, and therefore represents an unmet clinical need that urgently deserves further investigation.

Outpatient Management of Patients With Angina With No Obstructive Coronary Arteries: How to Come to a Proper Diagnosis and Therapy

Two-thirds of women and one-third of men who undergo a clinically indicated coronary angiography for stable angina, have no obstructive coronary artery disease (CAD). Coronary vascular dysfunction is a highly prevalent underlying cause of angina in these so called “Angina with No Obstructive Coronary Arteries (ANOCA)” patients, foremost in middle aged women. Coronary vascular dysfunction encompasses various endotypes, namely epicardial and microvascular coronary spasms, impaired vasodilatation, and increased microvascular resistance. ANOCA patients, especially those with underlying coronary vascular dysfunction, have an adverse cardiovascular prognosis, poor physical functioning, and a reduced quality of life. Since standard ischemia detection tests and coronary angiograms are not designed to diagnose coronary vascular dysfunction, this ischemic heart disease is often overlooked and hence undertreated. But adequate diagnosis is vital, so that treatment can be started to reduce symptoms, reduce healthcare costs and improve quality of life and cardiovascular prognosis. The purpose of this review is to give a contemporary overview of ANOCA with focus on coronary vascular dysfunction. We will provide a possible work-up of patients suspected of coronary vascular dysfunction in the outpatient clinical setting, based on the latest scientific insights and international consensus documents. We will discuss the value of ischemia detection testing, and non-invasive and invasive methods to diagnose coronary vascular dysfunction. Furthermore, we will go into pharmacological and non-pharmacological therapeutic options including anti-anginal regimens and lifestyle interventions.

Microvascular Dysfunction in Patients With Type II Diabetes Mellitus: Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance Reserve

Background: Coronary microvascular dysfunction (CMD) is an early feature of diabetic cardiomyopathy, which usually precedes the onset of diastolic and systolic dysfunction. Continuous intracoronary thermodilution allows an accurate and reproducible assessment of absolute coronary blood flow and microvascular resistance thus allowing the evaluation of coronary flow reserve (CFR) and Microvascular Resistance Reserve (MRR), a novel index specific for microvascular function, which is independent from the myocardial mass. In the present study we compared absolute coronary flow and resistance, CFR and MRR assessed by continuous intracoronary thermodilution in diabetic vs. non-diabetic patients. Left atrial reservoir strain (LASr), an early marker of diastolic dysfunction was compared between the two groups. Methods: In this observational retrospective study, 108 patients with suspected angina and non-obstructive coronary artery disease (NOCAD) consecutively undergoing elective coronary angiography (CAG) from September 2018 to June 2021 were enrolled. The invasive functional assessment of microvascular function was performed in the left anterior descending artery (LAD) with intracoronary continuous thermodilution. Patients were classified according to the presence of DM. Absolute resting and hyperemic coronary blood flow (in mL/min) and resistance (in WU) were compared between the two cohorts. FFR was measured to assess coronary epicardial lesions, while CFR and MRR were calculated to assess microvascular function. LAS, assessed by speckle tracking echocardiography, was used to detect early myocardial structural changes potentially associated with microvascular dysfunction. Results: The median FFR value was 0.83 [0.79-0.87] without any significant difference between the two groups. Absolute resting and hyperemic flow in the left anterior descending coronary were similar between diabetic and non-diabetic patients. Similarly, resting and hyperemic resistances did not change significantly between the two groups. In the DM cohort the CFR and MRR were significantly lower compared to the control group (CFR = 2.38 ± 0.61 and 2.88 ± 0.82; MRR = 2.79 ± 0.87 and 3.48 ± 1.02 for diabetic and non-diabetic patients respectively, [p < 0.05 for both]). Likewise, diabetic patients had a significantly lower reservoir, contractile and conductive LAS (all p < 0.05). Conclusions: Compared with non-diabetic patients, CFR and MRR were lower in patients with DM and non-obstructive epicardial coronary arteries, while both resting and hyperemic coronary flow and resistance were similar. LASr was lower in diabetic patients, confirming the presence of a subclinical diastolic dysfunction associated to the microcirculatory impairment. Continuous intracoronary thermodilution-derived indexes provide a reliable and operator-independent assessment of coronary macro- and microvasculature and might potentially facilitate widespread clinical adoption of invasive physiologic assessment of suspected microvascular disease.

Microvascular Resistance Reserve for Assessment of Coronary Microvascular Function: JACC Technology Corner

The need for a quantitative and operator-independent assessment of coronary microvascular function is increasingly recognized. We propose the theoretical framework of microvascular resistance reserve (MRR) as an index specific for the microvasculature, independent of autoregulation and myocardial mass, and based on operator-independent measurements of absolute values of coronary flow and pressure. In its general form, MRR equals coronary flow reserve (CFR) divided by fractional flow reserve (FFR) corrected for driving pressures. In 30 arteries, pressure, temperature, and flow velocity measurements were obtained simultaneously at baseline (BL), during infusion of saline at 10 mL/min (rest) and 20 mL/min (hyperemia). A strong correlation was found between continuous thermodilution-derived MRR and Doppler MRR (r = 0.88; 95% confidence interval: 0.72-0.93; P < 0.001). MRR was independent from the epicardial resistance, the lower the FFR value, the greater the difference between MRR and CFR. Therefore, MRR is proposed as a specific, quantitative, and operator-independent metric to quantify coronary microvascular dysfunction.

Assessing Microvascular Dysfunction in Angina With Unobstructed Coronary Arteries: JACC Review Topic of the Week

Coronary microvascular dysfunction is a highly prevalent condition of both structural and functional coronary disorders in patients with angina and nonobstructive coronary artery disease (ANOCA). Current diagnostic modalities to assess microvascular function are related to prognosis, but these modalities have several technical shortcomings and lack the opportunity to determine true coronary blood flow and microvascular resistance. Intracoronary continuous thermodilution assessment of absolute coronary flow (Q) and microvascular resistance (R) was recently shown to be safe and feasible in ANOCA. Further exploration and implementation could lead to a better understanding and treatment of patients with ANOCA. This review discuss the coronary pathophysiology of microvascular dysfunction, provides an overview of noninvasive and invasive diagnostics, and focuses on the novel continuous thermodilution method. Finally, how these measurements of absolute Q and R could be integrated and how this would affect future clinical care are discussed.

Thermodilution-derived volumetric resting coronary blood flow measurement in humans

BACKGROUND

Quantification of microvascular function requires the measurement of flow and resistance at rest and during hyperaemia. Continuous intracoronary thermodilution accurately measures coronary flow during hyperaemia.

AIMS

The aim of this study was to investigate whether continuous coronary thermodilution using lower infusion rates also enables volumetric coronary blood flow measurements (in mL/min) at rest.

METHODS

In 59 patients (88 arteries), the ratio of distal to proximal coronary pressure (Pd/Pa), as well as absolute blood flow (in mL/min) by continuous thermodilution, was recorded using a pressure/temperature guidewire. Saline was infused at rates of 10 and 20 mL/min. In 27 arteries, Doppler average peak velocity (APV) was measured simultaneously. Pd/Pa, APV, thermodilution-derived coronary flow reserve (CFRthermo) and coronary flow velocity reserve (CFVR) were assessed. In 10 arteries, simultaneous recordings were obtained at saline infusion rates of 6, 8, 10 and 20 mL/min.

RESULTS

Compared to baseline, saline infusion at 10 mL/min did not change Pd/Pa (0.95±0.05 versus 0.94±0.05, p=0.49) or APV (22±8 versus 23±8 cm/s, p=0.60); conversely, an infusion rate of 20 mL/min induced a decrease in Pd/Pa and an increase in APV. Stable thermodilution tracings were obtained during saline infusion at 8 and 10 mL/min, but not at 6 mL/min. Mean values of CFRthermo and CFVR were similar (2.78±0.91 versus 2.76±1.06, p=0.935) and their individual values correlated closely (r=0.89, 95% CI: 0.78-0.95, p<0.001).

CONCLUSIONS

In addition to hyperaemic flow, continuous thermodilution can quantify absolute resting coronary blood flow; therefore, it can be used to calculate coronary flow reserve and microvascular resistance reserve.

Basics of Coronary Thermodilution

Coronary microvascular dysfunction is a highly prevalent condition in both obstructive and nonobstructive coronary artery disease. Intracoronary thermodilution is a promising technique to investigate coronary microvascular (dys)function in vivo and to assess its most important metric: microvascular resistance. Here, the authors provide a practical review of bolus and continuous thermodilution for the measurement of coronary flow and microvascular resistance. The authors describe the basic principles of indicator-dilution theory and of coronary thermodilution and detail the practicalities of their application in the catheterization laboratory. Finally, the authors discuss contemporary clinical applications of coronary thermodilution-based microvascular assessment in humans and future perspectives.

Normal values of thermodilution-derived absolute coronary blood flow and microvascular resistance in humans

BACKGROUND

Absolute hyperaemic coronary blood flow (Q, in mL/min) and resistance (R, in Wood units [WU]) can be measured invasively by continuous thermodilution.

AIMS

The aim of this study was to assess normal reference values of Q and R.

METHODS

In 177 arteries (69 patients: 25 controls, i.e., without identifiable coronary atherosclerosis; 44 patients with mild, non-obstructive atherosclerosis), thermodilution-derived hyperaemic Q and total, epicardial, and microvascular absolute resistances (Rtot, Repi, and Rmicro) were measured. In 20 controls and 29 patients, measurements were obtained in all three major coronary arteries, thus allowing calculations of Q and R for the whole heart. In 15 controls (41 vessels) and 25 patients (71 vessels), vessel-specific myocardial mass was derived from coronary computed tomography angiography.

RESULTS

Whole heart hyperaemic Q tended to be higher in controls compared to patients (668±185 vs 582±138 mL/min, p=0.068). In the left anterior descending coronary artery (LAD), hyperaemic Q was significantly higher (293±102 mL/min versus 228±71 mL/min, p=0.004) in controls than in patients. This was driven mainly by a difference in Repi (43±23 vs 83±41 WU, p=0.048), without significant differences in Rmicro. After adjustment for vessel-specific myocardial mass, hyperaemic Q was similar in the three vascular territories (5.9±1.9, 4.9±1.7, and 5.3±2.1 mL/min/g, p=0.44, in the LAD, left circumflex and right coronary artery, respectively).

CONCLUSIONS

The present report provides reference values of absolute coronary hyperaemic Q and R. Q was homogeneously distributed in the three major myocardial territories but the large ranges of observed hyperaemic values of flow and of microvascular resistance preclude their clinical use for inter-patient comparison.

Accurate assessment of coronary blood flow by continuous thermodilution technique: Validation in a swine model

OBJECTIVE

To assess the accuracy of coronary thermodilution measurements made with the RayFlow® infusion catheter.

BACKGROUND

Measurements of absolute coronary blood flow (ABF) and absolute microvascular resistance (R_μ ) by continuous coronary thermodilution can be obtained in humans but their accuracy using a novel dedicated infusion catheter has not yet been validated. We compared ABF values obtained at different infusion rates to coronary blood flow (CBF) values obtained using flow probes, in swine.

METHODS

Twelve domestic swine were instrumented with coronary flow probes placed around the left anterior descending and circumflex coronary arteries. ABF was assessed with the RayFlow® infusion catheter during continuous saline infusion at fixed rates of 5 (n = 14), 10 (n = 15), 15 (n = 19), and 20 (n = 12) ml/min.

RESULTS

In the 60 measurements, ABF measured using thermodilution averaged 41 ± 17 ml/min (range from 17 to 90) and CBF values obtained with the coronary flow probes averaged 37 ± 18 ml/min (range from 8 to 87). The corresponding R_μ values were 1532 ± 791 (range from 323 to 5103) and 1903 ± 1162 (range from 287 to 6000) Woods units using thermodilution and coronary flow probe assessments, respectively. ABF and R_μ values measured using thermodilution were significantly correlated with the corresponding measurements obtained using coronary flow probes (R = 0.84 [0.73-0.95] and R = 0.80 [0.69-0.88], respectively).

CONCLUSIONS

ABF and R_μ assessed by continuous saline infusion through a RayFlow® catheter closely correlate with measurements obtained with the gold standard coronary flow probes in a swine model.

Coronary microvascular dysfunction assessed by continuous intracoronary thermodilution: A comparative study with index of microvascular resistance

BACKGROUND

This study aimed to assess the correlation between the standard of care, the index of microvascular resistance (IMR) versus the novel microvascular resistance (R_micro) and to determine the pathologic cut-off value in a selected population with suspected coronary microvascular dysfunction (CMD).

METHODS

One-hundred and twenty patients with high clinical suspicion of CMD due to ischemic symptoms in the absence of significant epicardial coronary lesions were prospectively included. Following a standardized systematic protocol, coronary flow reserve, IMR, fractional flow reserve, Q and R_micro were measured in the left anterior descending coronary artery using a temperature/pressure sensor-tipped guidewire and a dedicated infusion catheter.

RESULTS

There was a high prevalence of CMD with 50 (42%) patients showing an IMR ≥ 25. Median IMR was 23 [IQR: 14-34] and median R_micro was 464 Woods Units (WU) [IQR: 354-636WU]. ROC analyses identified 500 WU as the optimal R_micro cut-off to identify patients with an IMR ≥ 25, with an area under the ROC curve (C statistic) of 0.83 (95% CI: 0.74 to 0.89, p < 0.0001).

CONCLUSIONS

R_micro derived from continuous intracoronary thermodilution is an accurate index to measure microvascular resistances enabling the invasive diagnostic of CMD.

High microvascular resistance and reduced left atrial strain in patients with coronary microvascular dysfunction: The micro-strain study

BACKGROUND

It is already known that high coronary microvascular resistance (Rμ) is linked to altered left ventricular stiffness and might be an early indicator of heart failure with preserved ejection fraction (HFpEF). Left atrial dysfunction, on the other hand, varies according to the grade of left ventricular diastolic dysfunction. This is the first study to use the latest development for invasive assessment of Rμ and to combine it with echocardiographic assessment of left atrial strain during reservoir phase (LAS_r) by speckle tracking in relation to left ventricular (LV) diastolic function.

METHODS AND RESULTS

An invasive angiogram was performed in 97 patients because of suspected ANOCA. All patients underwent comprehensive echocardiography, yet image quality was poor in 15 patients leaving 82 patients to include in the final analysis. In order to compare Rμ with LAS_r values, patients were divided into 4 groups based upon normal values of Rμ as defined by Fournier et al. The mean LAS_r was plotted against the four resistance groups. The LAS_r was 48.6% in the lowest resistance group, and 40.1%, 36.3% and 30.1% in the low intermediate, high intermediate and high resistance group respectively. These differences were significant compared to the lowest resistance group (p < 0.05). Although higher Rμ groups showed more diastolic dysfunction, LAS_r was already decreased irrespective of the severity of diastolic dysfunction.

CONCLUSION

This study shows a relationship between increased Rμ and reduced LAS_r, that seems to precede conventional measures of left ventricular diastolic dysfunction. This suggests that microvascular dysfunction might be an early indicator for the development of impaired LA function.

Continuous Thermodilution Method to Assess Coronary Flow Reserve

Coronary flow reserve (CFR) is a well-validated flow-based physiological parameter that has shown value in clinical risk stratification. CFR can be invasively assessed, classically by Doppler and, more recently, by thermodilution with saline boluses (CFR_thermo-bolus). Alternatively, continuous thermodilution is a novel operator-independent, highly-reproducible technique to invasively quantify maximum absolute coronary flow (AF). This study aimed to assess the feasibility of this method to quantify resting AF and to determine CFR (CFR_{Thermo-infusion)} as compared with CFR_thermo-bolus. Sixty-two consecutive patients with suspicion of coronary disease and absence of significant epicardial lesions were prospectively investigated. AF at maximal hyperemia (20 mL/min) and at lower infusion rates (6-8-10-12 mL/min) were systematically measured using a dedicated catheter and a temperature/pressure guidewire. The absence of baseline Pd/Pa decrease at 6 (0.15 ± 0.2%), 8 (0.17 ± 0.18%) and 10 mL/min (0.2 ± 0.12%) demonstrated absence of hyperemia at ≤10 mL/min (all p = NS). However, at 12 mL/min hyperemia was confirmed by a significant decrease in Pd/Pa (1.3 ± 1.5%, p <0.01) and increase in AF from 10 mL/min to 12 mL/min (31.4 ± 28.1 mL, p <0.05). All curve tracings at 10 mL/min (129/129, 100%) were adequate versus only (7/15, 53%) and (15/18, 17%) at 6 mL/min, and 8 mL/min, respectively, and this infusion-rate was considered to determine resting-AF. CFR_{Thermo-infusion} was determined as the ratio of hyperemic-AF (20 mL/min) by resting-AF (10 mL/min). Mean CFR_{Thermo-infusion} was 2.56 ± 0.9 and CFR_thermo-bolus 2.49 ± 1. Both parameters showed a good correlation (r = 0.76; p <0.001) and intraclass agreement (ICC = 0.76; p <0.001).The continuous thermodilution method enables to quantify resting-AF providing a novel clinical tool to determine CRF. CFR_{Thermo-infusion} shows a good correlation with CFR_{thermo-bolus.}.

Absolute Coronary Blood Flow Measured by Continuous Thermodilution in Patients With Ischemia and Nonobstructive Disease

BACKGROUND

Intracoronary continuous thermodilution is a novel technique to quantify absolute coronary flow (Q) and resistance (R) and has potential advantages over current methods such as coronary flow reserve (CFR) and index of microvascular resistance (IMR). However, no data are available in patients with ischemia and nonobstructive coronary artery disease (INOCA).

OBJECTIVES

This study aimed to assess the relationship of Q and R with the established CFR/IMR in INOCA patients, to explore the potential of absolute Q, and to predict self-reported angina.

METHODS

Consecutive INOCA patients (n = 84; 87% women; mean age 56 ± 8 years) underwent coronary function testing, including acetylcholine (ACH) provocation testing, adenosine (ADE) testing (CFR/IMR), and continuous thermodilution (absolute Q and R) with saline-induced hyperemia.

RESULTS

ACH testing was abnormal (ACH+) in 87%, and ADE testing (ADE+) in 38%. The median absolute Q was 198 ml/min, and the median absolute R was 416 WU. The absolute R was higher in patients with ADE+ versus ADE- (495 WU vs. 375 WU; p = 0.04) but did not differ between patients with ACH+ versus ACH- (421 WU vs. 409 WU; p = 0.74). Low Q and high R were associated with severe angina (odds ratio: 3.09; 95% confidence interval: 1.16 to 8.28; p = 0.03; and odds ratio: 2.60; 95% confidence interval: 0.99 to 6.81; p = 0.05), respectively.

CONCLUSIONS

In this study, absolute R was higher in patients with abnormal CFR/IMR, whereas both Q and R were unrelated to coronary vasospasm. Q and R were associated with angina, although their exact predictive value should be determined in larger studies.

Coronary physiology before and after chronic total occlusion treatment: what does it tell us?

Studies performed in the last two decades demonstrate that after successful percutaneous coronary intervention (PCI) of a chronically occluded coronary artery, the physiology of the chronic total occlusion (CTO) vessel and dependent microvasculature does not normalise immediately but improves significantly over time. Generally, there is an increase in fractional flow reserve (FFR) in the CTO artery, a decrease in collateral blood supply and an increase in FFR in the donor artery accompanied by an increase in blood flow and decrease in microvascular resistance in the myocardium supplied by the CTO vessel. Analogous to these physiological changes, positive remodelling of the distal CTO artery also occurs over time, and intravascular imaging can be helpful for analysing distal vessel parameters. Follow-up coronary angiography with physiological measurements after several weeks to months can be helpful and informative in a subset of patients in order to decide upon the necessity for treatment of residual coronary artery stenosis in the vessel distal to the CTO or in the contralateral donor artery, as well as in deciding whether stent optimisation is indicated. We suggest that such physiological guidance of CTO procedures avoids unnecessary overtreatment during the initial procedure, guides interventions at follow-up, and improves our understanding of what PCI in CTO means.

Thermodilution-Based Invasive Assessment of Absolute Coronary Blood Flow and Microvascular Resistance: Quantification of Microvascular (Dys)Function?

During the last two decades, there has been a sharp increase in both interest and knowledge about the coronary microcirculation. Since these small vessels are not visible by the human eye, physiologic measurements should be used to characterize their function. The invasive methods presently used (coronary flow reserve (CFR) and index of microvascular resistance (IMR)) are operator-dependent and mandate the use of adenosine to induce hyperemia. In recent years, a new thermodilution-based method for measurement of absolute coronary blood flow and microvascular resistance has been proposed and initial procedural problems have been overcome. Presently, the technique is easy to perform using the Rayflow infusion catheter and the Coroventis software. The method is accurate, reproducible, and completely operator-independent. This method has been validated noninvasively against the current golden standard for flow assessment: Positron Emission Tomography-Computed Tomography (PET-CT). In addition, absolute flow and resistance measurements have proved to be safe, both periprocedurally and at long-term follow-up. With an increasing number of studies being performed, this method has great potential for better understanding and quantification of microvascular disease.