Sensitive, smartphone-based SARS-CoV-2 detection from clinical saline gargle samples

Recent advances in point-of-care testing of COVID-19

Advances in microfluidic device miniaturization and system integration contribute to the development of portable, handheld, and smartphone-compatible devices. These advancements in diagnostics have the potential to revolutionize the approach to detect and respond to future pandemics. Accordingly, herein, recent advances in point-of-care testing (POCT) of coronavirus disease 2019 (COVID-19) using various microdevices, including lateral flow assay strips, vertical flow assay strips, microfluidic channels, and paper-based microfluidic devices, are reviewed. However, visual determination of the diagnostic results using only microdevices leads to many false-negative results due to the limited detection sensitivities of these devices. Several POCT systems comprising microdevices integrated with portable optical readers have been developed to address this issue. Since the outbreak of COVID-19, effective POCT strategies for COVID-19 based on optical detection methods have been established. They can be categorized into fluorescence, surface-enhanced Raman scattering, surface plasmon resonance spectroscopy, and wearable sensing. We introduced next-generation pandemic sensing methods incorporating artificial intelligence that can be used to meet global health needs in the future. Additionally, we have discussed appropriate responses of various testing devices to emerging infectious diseases and prospective preventive measures for the post-pandemic era. We believe that this review will be helpful for preparing for future infectious disease outbreaks.

Saliva Analysis Based on Microfluidics: Focusing the Wide Spectrum of Target Analyte

Saliva is one of the most critical human body fluids that can reflect the state of the human body. The detection of saliva is of great significance for disease diagnosis and health monitoring. Microfluidics, characterized by microscale size and high integration, is an ideal platform for the development of rapid and low-cost disease diagnostic techniques and devices. Microfluidic-based saliva testing methods have aroused considerable interest due to the increasing need for noninvasive testing and frequent or long-term testing. This review briefly described the significance of saliva analysis and generally classified the targets in saliva detection into pathogenic microorganisms, inorganic substances, and organic substances. By using this classification as a benchmark, the state-of-the-art research results on microfluidic detection of various substances in saliva were summarized. This work also put forward the challenges and future development directions of microfluidic detection methods for saliva.

Microparticle-Based Detection of Viruses

Surveillance of viral pathogens in both point-of-care and clinical settings is imperative to preventing the widespread propagation of disease-undetected viral outbreaks can pose dire health risks on a large scale. Thus, portable, accessible, and reliable biosensors are necessary for proactive measures. Polymeric microparticles have recently gained popularity for their size, surface area, and versatility, which make them ideal biosensing tools. This review cataloged recent investigations on polymeric microparticle-based detection platforms across eight virus families. These microparticles were used as labels for detection (often with fluorescent microparticles) and for capturing viruses for isolation or purification (often with magnetic microparticles). We also categorized all methods by the characteristics, materials, conjugated receptors, and size of microparticles. Current approaches were compared, addressing strengths and weaknesses in the context of virus detection. In-depth analyses were conducted for each virus family, categorizing whether the polymeric microparticles were used as labels, for capturing, or both. We also summarized the types of receptors conjugated to polymeric microparticles for each virus family.

A portable immunosensor provides sensitive and rapid detection of Borrelia burgdorferi antigen in spiked blood

There are no assays for detecting B. burgdorferi antigen in blood of infected Lyme disease individuals. Here, we provide proof-of-principle evidence that we can quantify B. burgdorferi antigen in spiked blood using a portable smartphone-based fluorescence microscope that measures immunoagglutination on a paper microfluidic chip. We targeted B. burgdorferi OspA to develop a working prototype and added examples of two antigens (OspC and VlsE) that have diagnostic value for discrimination of Lyme disease stage. Using an extensively validated monoclonal antibody to OspA (LA-2), detection of OspA antigen had a broad linear range up to 100 pg/mL in 1% blood and the limit of detection (LOD) was 100 fg/mL (= 10 pg/mL in undiluted blood), which was 1000 times lower than our target of 10 ng/mL. Analysis of the two other targets was done using polyclonal and monoclonal antibodies. OspC antigen was detected at LOD 100 pg/mL (= 10 ng/mL of undiluted blood) and VlsE antigen was detected at LOD 1-10 pg/mL (= 0.1-1 ng/mL of undiluted blood). The method is accurate and was performed in 20 min from sample to answer. When optimized for detecting several B. burgdorferi antigens, this assay may differentiate active from past infections and facilitate diagnosis of Lyme disease in the initial weeks of infection, when antibody presence is typically below the threshold to be detected by serologic methods.

Rapid, sensitive detection of PFOA with smartphone-based flow rate analysis utilizing competitive molecular interactions during capillary action

Perfluorinated-alkyl substances (PFAS) pose an unmet threat to the public because they are not strictly monitored and regulated. Perfluorinated-carbon alkyl chains (PFOA), a type of PFAS, at 70 fg/μL is the current health and safety recommendation. Current testing methods for PFOA and PFAS chemicals include HPLC-MS/MS and molecularly imprinted polymers, which are expensive, time-consuming, and require training. In this work, PFOA and PFOS detection was performed on a paper microfluidic chip using competitive interactions between PFOA/PFOS, cellulose fibers, and various reagents (L-lysine, casein, and albumin). Such interactions altered the surface tension at the wetting front and, subsequently, the capillary flow rate. A smartphone captured the videos of this capillary action. The samples flowed through the channel in less than 2 min. Albumin worked the best in detecting PFOA, followed by casein. The detection limit was 10 ag/μL in DI water and 1 fg/μL in effluent (processed) wastewater. Specificity to other non-fluorocarbon surfactants was also tested, using anionic sodium dodecyl sulfate (SDS), non-ionic Tween 20, and cationic cetrimonium bromide (CTAB). A combination of the reagents successfully distinguished PFOA from all three surfactants at 100% accuracy. This low-cost, handheld assay can be an accessible alternative for rapid in situ estimation of PFOA concentration.

Sensitive SARS-CoV-2 salivary antibody assays for clinical saline gargle samples using smartphone-based competitive particle immunoassay platforms

Antibody assay for SARS-CoV-2 has become increasingly important to track latent and asymptomatic infections, check the individual's immune status, and confirm vaccine efficacy and durability. However, current SARS-CoV-2 antibody assays require invasive blood collection, requiring a remote laboratory and a trained phlebotomist. Direct detection of SARS-CoV-2 antibodies from clinical saline gargle samples has been considered challenging due to the smaller number of antibodies in such specimens and the high limit of detection of currently available rapid tests. This work demonstrates simple and non-invasive methods for detecting SARS-CoV-2 salivary antibodies. Competitive particle immunoassays were developed on a paper microfluidic chip using the receptor-binding domain (RBD) antigens on spike proteins. Using a smartphone, they were monitored by counting the captured fluorescent particles or evaluating the capillary flow velocities. The limit of detection (LOD), cross-binding between alpha- and omicron-strains, and the effect of angiotensin-converting enzyme 2 (ACE2) presence were investigated. LODs were 1-5 ng/mL in both 10% and 1% saliva. Clinical saline gargle samples were assayed using both methods, showing a statistical difference between virus-negative and virus-positive samples, although the assays targeted antibodies. Only a small number of virus-positive samples were antibody-negative. The high assay sensitivity detected a small number of antibodies developed even during the early phase of infections. Overall, this work demonstrates the ability to detect SARS-CoV-2 salivary IgG antibodies on simple, cost-effective, portable platforms towards mitigating SARS-CoV-2 and potentially other respiratory viruses.

Smartphone-based corona virus detection using saliva: A mini-review

During the ongoing worldwide epidemic, SARS-CoV-2 has infected millions of individuals and taken the lives of numerous victims. It is clear that early detection of infected individuals, especially asymptomatic carriers, is possible with the development of innovative analytical tools for rapid identification of COVID-19 present in nasopharyngeal swabs, serum, and saliva. The saliva, as a diagnostic sample, can be easily collected by the patient with almost no discomfort and needs specialized healthcare personnel to manage, which reduces the risks for the operator. Moreover, smartphone-based sensing systems are one of the most attractive techniques that can speed up the detection time of COVID-19 agents without the need for professional staff and clinical centers. In this review, recent advances in precise salivary-based SARS-CoV-2 diagnosis using smartphones via viral RNA detection, antibody identification, and viral antigen identification were summarized. Finally, the conclusion and future perspective of this field are described in brief.

Microfluidics for COVID-19: From Current Work to Future Perspective

Spread of coronavirus disease 2019 (COVID-19) has significantly impacted the public health and economic sectors. It is urgently necessary to develop rapid, convenient, and cost-effective point-of-care testing (POCT) technologies for the early diagnosis and control of the plague's transmission. Developing POCT methods and related devices is critical for achieving point-of-care diagnosis. With the advantages of miniaturization, high throughput, small sample requirements, and low actual consumption, microfluidics is an essential technology for the development of POCT devices. In this review, according to the different driving forces of the fluid, we introduce the common POCT devices based on microfluidic technology on the market, including paper-based microfluidic, centrifugal microfluidic, optical fluid, and digital microfluidic platforms. Furthermore, various microfluidic-based assays for diagnosing COVID-19 are summarized, including immunoassays, such as ELISA, and molecular assays, such as PCR. Finally, the challenges of and future perspectives on microfluidic device design and development are presented. The ultimate goals of this paper are to provide new insights and directions for the development of microfluidic diagnostics while expecting to contribute to the control of COVID-19.

Achieving broad availability of SARS-CoV-2 detections via smartphone-based analysis

With the development of COVID-19, widely available tests are in great demand. Naked-eye SARS-CoV-2 test kits have recently been developed as home tests, but their sensitivity and accuracy are sometimes limited. Smartphones can convert various signals into digital information, potentially improving the sensitivity and accuracy of these home tests. Herein, we summarize smartphone-based detections for SARS-CoV-2. Optical detections of non-nucleic acids using various sensors and portable imaging systems, as well as nucleic acid analyses based on LAMP, CRISP, CATCH, and biosensors are discussed. Furthermore, different electrochemical detections were compared. We show results obtained using relatively complex equipment, complicated programming procedures, or custom smartphone apps, and describe methods for obtaining information with only simple setups and free software on smartphones. Then, the combined costs of typical smartphone-based detections are evaluated. Finally, the prospect of improving smartphone-based strategies to achieve broad availability of SARS-CoV-2 detection is proposed.

COVID-19 variants' cross-reactivity on the paper microfluidic particle counting immunoassay

SARS-CoV-2 has mutated many times since the onset of the COVID-19 pandemic, and the omicron is currently the most dominant variant. Determining the specific strain of the virus is beneficial in providing proper care and containment of the disease. We have previously reported a novel method of counting the number of particle immunoagglutination on a paper microfluidic chip using a smartphone-based fluorescence microscope. A single-copy-level detection was demonstrated from clinical saline gargle samples. In this work, we further evaluated two different SARS-CoV-2 monoclonal antibodies to spike vs. nucleocapsid antigens for detecting omicron vs. delta and spike vs. nucleocapsid proteins. The SARS-CoV-2 monoclonal antibody to nucleocapsid proteins could distinguish omicron from delta variants and nucleocapsid from spike proteins. However, such distinction could not be found with the monoclonal antibody to spike proteins, despite the numerous mutations found in spike proteins among variants. This result may suggest a clue to the role of nucleocapsid proteins in recognizing different variants.

Investigation of Solvent-Assisted In-Mold Bonding of Cyclic Olefin Copolymer (COC) Microfluidic Chips

The bonding of microfluidic chips is an essential process to enclose microchannels or microchambers in a lab-on-a-chip. In order to improve the bonding quality while reducing the fabrication time, a solvent-assisted bonding strategy was proposed to seal the microchannels immediately after the cover sheet and substrate chip was injection molded in a single mold. Proper organic solvents were selected and the influences of solvent ratios on the surface roughness, microchannel morphology, and contact angle of microfluidic chips were investigated. When the solvent bonding was integrated in the mold, the influences of solvent volume fraction, solvent dosage, bonding pressure, and bonding time on the bonding quality were analyzed. Results show that the solvent cyclohexane needs to be mixed with isopropanol to reduce the dissolution effect. Solvent treatment is suggested to be performed on the cover sheet with a cyclohexane volume fraction of 70% and a dose of 1.5 mL, a bonding pressure of 2 MPa, and a bonding time of 240 s. The bonding strength reaches 913 kPa with the optimized parameters, while the microchannel deformation was controlled below 8%.