Bioreactors mediate the effectiveness of tissue engineering scaffolds

Matrix from urine stem cells boosts tissue-specific stem cell mediated functional cartilage reconstruction

Articular cartilage has a limited capacity to self-heal once damaged. Tissue-specific stem cells are a solution for cartilage regeneration; however, ex vivo expansion resulting in cell senescence remains a challenge as a large quantity of high-quality tissue-specific stem cells are needed for cartilage regeneration. Our previous report demonstrated that decellularized extracellular matrix (dECM) deposited by human synovium-derived stem cells (SDSCs), adipose-derived stem cells (ADSCs), urine-derived stem cells (UDSCs), or dermal fibroblasts (DFs) provided an ex vivo solution to rejuvenate human SDSCs in proliferation and chondrogenic potential, particularly for dECM deposited by UDSCs. To make the cell-derived dECM (C-dECM) approach applicable clinically, in this study, we evaluated ex vivo rejuvenation of rabbit infrapatellar fat pad-derived stem cells (IPFSCs), an easily accessible alternative for SDSCs, by the abovementioned C-dECMs, in vivo application for functional cartilage repair in a rabbit osteochondral defect model, and potential cellular and molecular mechanisms underlying this rejuvenation. We found that C-dECM rejuvenation promoted rabbit IPFSCs' cartilage engineering and functional regeneration in both ex vivo and in vivo models, particularly for the dECM deposited by UDSCs, which was further confirmed by proteomics data. RNA-Seq analysis indicated that both mesenchymal-epithelial transition (MET) and inflammation-mediated macrophage activation and polarization are potentially involved in the C-dECM-mediated promotion of IPFSCs' chondrogenic capacity, which needs further investigation.

Functional tissue engineering of articular cartilage for biological joint resurfacing-The 2021 Elizabeth Winston Lanier Kappa Delta Award

Biological resurfacing of entire articular surfaces represents a challenging strategy for the treatment of cartilage degeneration that occurs in osteoarthritis. Not only does this approach require anatomically sized and functional engineered cartilage, but the inflammatory environment within an arthritic joint may also inhibit chondrogenesis and induce degradation of native and engineered cartilage. Here, we present the culmination of multiple avenues of interdisciplinary research leading to the development and testing of bioartificial cartilage for tissue-engineered resurfacing of the hip joint. The work is based on a novel three-dimensional weaving technology that is infiltrated with specific bioinductive materials and/or genetically-engineered stem cells. A variety of design approaches have been tested in vitro, showing biomimetic cartilage-like properties as well as the capability for long-term tunable and inducible drug delivery. Importantly, these cartilage constructs have the potential to provide mechanical functionality immediately upon implantation, as they will need to replace a majority, if not the entire joint surface to restore function. To date, these approaches have shown excellent preclinical success in a variety of animal studies, including the resurfacing of a large osteochondral defect in the canine hip, and are now well-poised for clinical translation.

3D Cell Cultures: Evolution of an Ancient Tool for New Applications

Recently, research is undergoing a drastic change in the application of the animal model as a unique investigation strategy, considering an alternative approach for the development of science for the future. Although conventional monolayer cell cultures represent an established and widely used in vitro method, the lack of tissue architecture and the complexity of such a model fails to inform true biological processes in vivo. Recent advances in cell culture techniques have revolutionized in vitro culture tools for biomedical research by creating powerful three-dimensional (3D) models to recapitulate cell heterogeneity, structure and functions of primary tissues. These models also bridge the gap between traditional two-dimensional (2D) single-layer cultures and animal models. 3D culture systems allow researchers to recreate human organs and diseases in one dish and thus holds great promise for many applications such as regenerative medicine, drug discovery, precision medicine, and cancer research, and gene expression studies. Bioengineering has made an important contribution in the context of 3D systems using scaffolds that help mimic the microenvironments in which cells naturally reside, supporting the mechanical, physical and biochemical requirements for cellular growth and function. We therefore speak of models based on organoids, bioreactors, organ-on-a-chip up to bioprinting and each of these systems provides its own advantages and applications. All of these techniques prove to be excellent candidates for the development of alternative methods for animal testing, as well as revolutionizing cell culture technology. 3D systems will therefore be able to provide new ideas for the study of cellular interactions both in basic and more specialized research, in compliance with the 3R principle. In this review, we provide a comparison of 2D cell culture with 3D cell culture, provide details of some of the different 3D culture techniques currently available by discussing their strengths as well as their potential applications.

Comparison of chondrogenesis-related biological behaviors between human urine-derived stem cells and human bone marrow mesenchymal stem cells from the same individual

BACKGROUND

Stem cells are the main choice for seed cells in tissue engineering, but using most traditional stem cells requires invasive and complicated procedures. Human urine-derived stem cells (hUSCs) are an alternative stem cell source with the advantages of being isolated noninvasively and repetitively from the same individual. The aim of this study was to compare chondrogenesis-related biological behaviors between hUSCs and human bone marrow mesenchymal stem cells (hBMSCs) from the same individual.

METHODS

hUSCs and hBMSCs were isolated from six patients who underwent iliac bone grafting. Cell morphology, proliferation, colony-forming, migration, and multidifferentiation analyses were performed in vitro. Then, acellular cartilage extracellular matrix (ACM) scaffolds were fabricated for in vivo implantation. The comparisons of cell viability, morphology, proliferation, and chondrogenesis between hUSCs and hBMSCs cultured on scaffolds were performed before implantation. The scaffolds loaded with hUSCs or hBMSCs were implanted into a rabbit knee model to repair cartilage defects. Magnetic resonance imaging (MRI) and micro-computed tomography (μCT) Analyses, inflammation and toxicity assays, gross observation, and histological evaluation were performed to evaluate the cartilage repair effects.

RESULTS

In in vitro experiments, hUSCs had better capacity for proliferation, colony-forming, and migration compared to hBMSCs in the same passage, while hBMSCs had greater osteogenic, adipogenic, and chondrogenic abilities compared to hUSCs in the same passage. Both hUSCs and hBMSCs at passage 3 had the strongest potential for proliferation, colony-forming, and multilineage differentiation compared to cells in other passages. The ACM scaffolds loaded with hUSCs or hBMSCs both significantly promoted the repair of cartilage defects in the rabbit knee model at 12 weeks' postimplantation, and the new tissue was mainly hyaline cartilage. However, there was no significant difference in cartilage repair effects between hUSCs and hBMSCs.

CONCLUSIONS

In in vitro experiments, hUSCs presented better capacity for proliferation, while hBMSCs had greater chondrogenic ability. However, hUSCs and hBMSCs had similar cartilage repair effects in vivo. Results indicated that hUSCs can be a stem cell alternative for cartilage regeneration and provide a powerful platform for cartilage tissue engineering and clinical transformation.

Unfavorable Contribution of a Tissue-Engineering Cartilage Graft to Osteochondral Defect Repair in Young Rabbits

A stem cell-based tissue-engineering approach is a promising strategy for treatment of cartilage defects. However, there are conflicting data in the feasibility of using this approach in young recipients. A young rabbit model with an average age of 7.7 months old was used to evaluate the effect of a tissue-engineering approach on the treatment of osteochondral defects. Following in vitro evaluation of proliferation and chondrogenic capacity of infrapatellar fat pad-derived stem cells (IPFSCs) after expansion on either tissue culture plastic (TCP) or decellularized extracellular matrix (dECM), a premature tissue construct engineered from pretreated IPFSCs was used to repair osteochondral defects in young rabbits. We found that dECM expanded IPFSCs exhibited higher proliferation and chondrogenic differentiation compared to TCP expanded cells in both pellet and tissue construct culture systems. Six weeks after creation of bilateral osteochondral defects in the femoral trochlear groove of rabbits, the Empty group (left untreated) had the best cartilage resurfacing with the highest score in Modified O’Driscoll Scale (MODS) than the other groups; however, this score had no significant difference compared to that of 15-week samples, indicating that young rabbits stop growing cartilage once they reach 9 months old. Interestingly, implantation of premature tissue constructs from both dECM and TCP groups exhibited significantly improved cartilage repair at 15 weeks compared to those at six weeks (about 9 months old), indicating that a tissue-engineering approach is able to repair adult cartilage defects. We also found that implanted pre-labeled cells in premature tissue constructs were undetectable in resurfaced cartilage at both time points. This study suggests that young rabbits (less than 9 months old) might respond differently to the classical tissue-engineering approach that is considered as a potential treatment for cartilage defects in adult rabbits.

Graphene oxide-modified 3D acellular cartilage extracellular matrix scaffold for cartilage regeneration

Articular cartilage regeneration is a challenge in orthopedics and tissue engineering. This study prepared a graphene oxide (GO)-modified 3D acellular cartilage extracellular matrix (ACM) scaffold for cartilage repair. Cartilage slices were decellularized using a combination of physical and chemical methods of fabricating ACM particles. GO was crosslinked with the ACM by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxy succinimide to prepare a composite scaffold. GO modification improved the internal structure and mechanical properties of the scaffold. The GO-modified (2 mg/mL) composite scaffold promoted cell adhesion, cell proliferation, and chondrogenic differentiation in vitro. Experiments on subcutaneous implantation in rats demonstrated that the composite scaffold had good biocompatibility and mild inflammatory response. After 12 weeks of implantation, the composite scaffold loaded with bone marrow mesenchymal stem cells completely bridged the cartilage defects in the rabbit knee with hyaline cartilage. Results indicated that the GO-modified 3D ACM composite scaffold can provide a powerful platform for cartilage tissue engineering and articular cartilage injury treatment.

Current progress in hepatic tissue regeneration by tissue engineering

Liver, as a vital organ, is responsible for a wide range of biological functions to maintain homeostasis and any type of damages to hepatic tissue contributes to disease progression and death. Viral infection, trauma, carcinoma, alcohol misuse and inborn errors of metabolism are common causes of liver diseases are a severe known reason for leading to end-stage liver disease or liver failure. In either way, liver transplantation is the only treatment option which is, however, hampered by the increasing scarcity of organ donor. Over the past years, considerable efforts have been directed toward liver regeneration aiming at developing new approaches and methodologies to enhance the transplantation process. These approaches include producing decellularized scaffolds from the liver organ, 3D bio-printing system, and nano-based 3D scaffolds to simulate the native liver microenvironment. The application of small molecules and micro-RNAs and genetic manipulation in favor of hepatic differentiation of distinct stem cells could also be exploited. All of these strategies will help to facilitate the application of stem cells in human medicine. This article reviews the most recent strategies to generate a high amount of mature hepatocyte-like cells and updates current knowledge on liver regenerative medicine.

Bioreactors Design, Types, Influencing Factors and Potential Application in Dentistry. A Literature Review

Objectives:

A variety of bioreactors and related approaches have been applied to dental tissues as their use has become more essential in the field of regenerative dentistry and dental tissue engineering. The review discusses the various types of bioreactors and their potential application in dentistry.

Methods:

Review of the literature was conducted using keywords (and MeSH) like Bioreactor, Regenerative Dentistry, Fourth Factor, Stem Cells, etc., from the journals published in English. All the searched abstracts, published in indexed journals were read and reviewed to further refine the list of included articles. Based on the relevance of abstracts pertaining to the manuscript, full-text articles were assessed.

Results:

Bioreactors provide a prerequisite platform to create, test, and validate the biomaterials and techniques proposed for dental tissue regeneration. Flow perfusion, rotational, spinner-flask, strain and customize-combined bioreactors have been applied for the regeneration of bone, periodontal ligament, gingiva, cementum, oral mucosa, temporomandibular joint and vascular tissues. Customized bioreactors can support cellular/biofilm growth as well as apply cyclic loading. Center of disease control & dip-flow biofilm-reactors and micro-bioreactor have been used to evaluate the biological properties of dental biomaterials, their performance assessment and interaction with biofilms. Few case reports have also applied the concept of in vivo bioreactor for the repair of musculoskeletal defects and used customdesigned bioreactor (Aastrom) to repair the defects of cleft-palate.

Conclusions:

Bioreactors provide a sterile simulated environment to support cellular differentiation for oro-dental regenerative applications. Also, bioreactors like, customized bioreactors for cyclic loading, biofilm reactors (CDC & drip-flow), and micro-bioreactor, can assess biological responses of dental biomaterials by simultaneously supporting cellular or biofilm growth and application of cyclic stresses.

Dynamic mechanical loading facilitated chondrogenic differentiation of rabbit BMSCs in collagen scaffolds

Mechanical signals have been played close attention to regulate chondrogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). In this study, dynamic mechanical loading simulation with natural frequencies and intensities were applied to the 3D cultured BMSCs-collagen scaffold constructs. We investigated the effects of dynamic mechanical loading on cell adhesion, uniform distribution, proliferation, secretion of extracellular matrix (ECM) and chondrogenic differentiation of BMSCs-collagen scaffold constructs. The results indicated that dynamic mechanical loading facilitated the BMSCs adhesion, uniform distribution, proliferation and secretion of ECM with a slight contraction, which significantly improved the mechanical strength of the BMSCs-collagen scaffold constructs for better mimicking the structure and function of a native cartilage. Gene expression results indicated that dynamic mechanical loading contributed to the chondrogenic differentiation of BMSCs with higher levels of AGG, COL2A1 and SOX9 genes, and prevented of hypertrophic process with lower levels of COL10A1, and reduced the possibility of fibrocartilage formation due to down-regulated COL1A2. In conclusion, this study emphasized the important role of dynamic mechanical loading on promoting BMSCs chondrogenic differentiation and maintaining the cartilage phenotype for in vitro reconstruction of tissue-engineered cartilage, which provided an attractive prospect and a feasibility strategy for cartilage repair.

Comparative advantages of infrapatellar fat pad: an emerging stem cell source for regenerative medicine

Growing evidence indicates that infrapatellar fat pad (IPFP)-derived stem cells (IPFSCs) exert robust proliferation capacities and multilineage differentiation potentials. However, few papers summarize the advantages that the IPFP and IPFSCs have in regenerative medicine. In this review we delineate the development and anatomy of the IPFP by comparing it with an adjacent fibrous tissue, synovium, and a more frequently harvested fat depot, subcutaneous adipose tissue. Furthermore, we explore the similarities and differences of stem cells from these three tissues in terms of IPFSCs, synovium-derived stem cells and subcutaneous adipose tissue-derived stem cells in proliferation capacity and tri-lineage differentiation potentials, including chondrogenesis, osteogenesis and adipogenesis. Finally, we highlight the advantages of IPFSCs in regenerative medicine, such as the abundant accessibility and the ability to resist inflammation and senescence, two hurdles for cell-based tissue regeneration. Considering the comparative advantages of IPFSCs, the IPFP can serve as an excellent stem cell source for regenerative medicine, particularly for cartilage regeneration.

Functionality of decellularized matrix in cartilage regeneration: A comparison of tissue versus cell sources

Increasing evidence indicates that decellularized extracellular matrices (dECMs) derived from cartilage tissues (T-dECMs) or chondrocytes/stem cells (C-dECMs) can support proliferation and chondrogenic differentiation of cartilage-forming cells. However, few review papers compare the differences between these dECMs when they serve as substrates for cartilage regeneration. In this review, after an introduction of cartilage immunogenicity and decellularization methods to prepare T-dECMs and C-dECMs, a comprehensive comparison focuses on the effects of T-dECMs and C-dECMs on proliferation and chondrogenic differentiation of chondrocytes/stem cells in vitro and in vivo. Key factors within dECMs, consisting of microarchitecture characteristics and micromechanical properties as well as retained insoluble and soluble matrix components, are discussed in-depth for potential mechanisms underlying the functionality of these dECMs in regulating chondrogenesis. With this information, we hope to benefit dECM based cartilage engineering and tissue regeneration for future clinical application.

STATEMENT OF SIGNIFICANCE

The use of decellularized extracellular matrix (dECM) is becoming a promising approach for tissue engineering and regeneration. Compared to dECM derived from cartilage tissue, recently reported dECM from cell sources exhibits a distinct role in cell based cartilage regeneration. In this review paper, for the first time, tissue and cell based dECMs are comprehensively compared for their functionality in cartilage regeneration. This information is expected to provide an update for dECM based cartilage regeneration.

Hydrodynamic Stimulation and Long Term Cultivation of Nucleus Pulposus Cells: A New Bioreactor System to Induce Extracellular Matrix Synthesis by Nucleus Pulposus Cells Dependent on Intermittent Hydrostatic Pressure

A novel bioreactor system was constructed to induce extracellular matrix (ECM) synthesis by intervertebral disc (ID) cells due to intermittent hydrostatic pressure. The developed system is completely sterilizable and reusable. It is viable for cultivation, immobilization, and stimulation of various other cell types and tissues especially for cartilage. The custom made lid allows long-run cultivation through semi-continuous operation. Manual interferences and therefore the risk of contamination are reduced. Sampling, medium changing and addition of supplements are easily performed from the connected conditioning vessel, which could be placed in an incubator.

For the present investigations nucleus pulposus cells from pigs were taken and immobilized in agarose to obtain three-dimensional cell matrix constructs which were subjected to intermittent hydrostatic pressure. Afterwards the construct was biochemically examined. The proven constituents of ECM were found to be released in dependence of the magnitude and profile of the applied pressure.

Ex vivo model unravelling cell distribution effect in hydrogels for cartilage repair

The implantation of chondrocyte-laden hydrogels is a promising cartilage repair strategy. Chondrocytes can be spatially positioned in hydrogels and thus in defects, while current clinical cell therapies introduce chondrocytes in the defect depth. The main aim of this study was to evaluate the effect of spatial chondrocyte distribution on the reparative process. To reduce animal experiments, an ex vivo osteochondral plug model was used and evaluated. The role of the delivered and endogenous cells in the repair process was investigated.

Full thickness cartilage defects were created in equine osteochondral plugs. Defects were filled with (A) chondrocytes at the bottom of the defect, covered with a cell-free hydrogel, (B) chondrocytes homogeneously encapsulated in a hydrogel, and (C, D) combinations of A and B with different cell densities. Plugs were cultured for up to 57 days, after which the cartilage and repair tissues were characterized and compared to baseline samples. Additionally, at day 21, the origin of cells in the repair tissue was evaluated.

Best outcomes were obtained with conditions C and D, which resulted in well-integrated cartilage-like tissue that completely filled the defect, regardless of the initial cell density. A critical role of the spatial chondrocyte distribution in the repair process was observed. Moreover, the osteochondral plugs stimulated cartilage formation in the hydrogels when cultured in the defects. The resulting repair tissue originated from the delivered cells.

These findings confirm the potential of the osteochondral plug model for the optimization of the composition of cartilage implants and for studying repair mechanisms.

Piezoelectric material - A promising approach for bone and cartilage regeneration

Bone and cartilage are major weight-bearing connective tissues in human and possesses utmost vulnerability for degeneration. The potential causes are mechanical trauma, cancer and disease condition like osteoarthritis and osteoporosis, etc. The regeneration/repair is a challenging, since their complex structures and activities. Current treatment options comprise of auto graft, allograft, artificial bone substituent, autologous chondrocyte implantation, mosaicplasty, marrow stimulation and tissue engineering. Were incompetent to overcome the problem like abandoned growth factor degradation, indistinct growth factor dose and lack of integrity and mechanical properties in regenerated tissues. Present, paper focuses on the novel hypothesis for regeneration of bone and cartilage by using piezoelectric smart property of scaffold material.

Morphological, Immunocytochemical, and Biochemical Studies of Rat Costal Chondrocytes Exposed to IL-1β and TGF-β1

This study was undertaken to determine the effects of IL-1β and TGF-β1 on the expression of differentiation-associated genes in chondrocytes in vitro. Rat costal chondrocytes were exposed to different concentrations of IL-1β and TGF-β1 for 48 h and tested for gene expression. IL-1β increased the expression of aggrecanase-1 and aggrecanase-2 and decreased the content of aggrecan and collagen II. Low concentration of TGF-β1 decreased the expression of aggrecan and collagen II and increased the expression of aggrecanase-2. However, the level of aggrecanase-1 was significantly elevated in the presence of high concentration of TGF-β1. IL-1β and TGF-β1 show the ability to modulate the production of aggrecan and collagen II in chondrocytes in vitro.

Interstitial Perfusion Culture with Specific Soluble Factors Inhibits Type I Collagen Production from Human Osteoarthritic Chondrocytes in Clinical-Grade Collagen Sponges

Articular cartilage has poor healing ability and cartilage injuries often evolve to osteoarthritis. Cell-based strategies aiming to engineer cartilaginous tissue through the combination of biocompatible scaffolds and articular chondrocytes represent an alternative to standard surgical techniques. In this context, perfusion bioreactors have been introduced to enhance cellular access to oxygen and nutrients, hence overcoming the limitations of static culture and improving matrix deposition. Here, we combined an optimized cocktail of soluble factors, the BIT (BMP-2, Insulin, Thyroxin), and clinical-grade collagen sponges with a bidirectional perfusion bioreactor, namely the oscillating perfusion bioreactor (OPB), to engineer in vitro articular cartilage by human articular chondrocytes (HACs) obtained from osteoarthritic patients. After amplification, HACs were seeded and cultivated in collagen sponges either in static or dynamic conditions. Chondrocyte phenotype and the nature of the matrix synthesized by HACs were assessed using western blotting and immunohistochemistry analyses. Finally, the stability of the cartilaginous tissue produced by HACs was evaluated in vivo by subcutaneous implantation in nude mice. Our results showed that perfusion improved the distribution and quality of cartilaginous matrix deposited within the sponges, compared to static conditions. Specifically, dynamic culture in the OPB, in combination with the BIT cocktail, resulted in the homogeneous production of extracellular matrix rich in type II collagen. Remarkably, the production of type I collagen, a marker of fibrous tissues, was also inhibited, indicating that the association of the OPB with the BIT cocktail limits fibrocartilage formation, favoring the reconstruction of hyaline cartilage.

Cell-based tissue engineering strategies used in the clinical repair of articular cartilage

One of the most important issues facing cartilage tissue engineering is the inability to move technologies into the clinic. Despite the multitude of current research in the field, it is known that 90% of new drugs that advance past animal studies fail clinical trials. The objective of this review is to provide readers with an understanding of the scientific details of tissue engineered cartilage products that have demonstrated a certain level of efficacy in humans, so that newer technologies may be developed upon this foundation. Compared to existing treatments, such as microfracture or autologous chondrocyte implantation, a tissue engineered product can potentially provide more consistent clinical results in forming hyaline repair tissue and in filling the entirety of the defect. The various tissue engineering strategies (e.g., cell expansion, scaffold material, media formulations, biomimetic stimuli, etc.) used in forming these products, as collected from published literature, company websites, and relevant patents, are critically discussed. The authors note that many details about these products remain proprietary, not all information is made public, and that advancements to the products are continuously made. Nevertheless, by understanding the design and production processes of these emerging technologies, one can gain tremendous insight into how to best use them and also how to design the next generation of tissue engineered cartilage products.

Cell-based tissue engineering strategies used in the clinical repair of articular cartilage

One of the most important issues facing cartilage tissue engineering is the inability to move technologies into the clinic. Despite the multitude of current research in the field, it is known that 90% of new drugs that advance past animal studies fail clinical trials. The objective of this review is to provide readers with an understanding of the scientific details of tissue engineered cartilage products that have demonstrated a certain level of efficacy in humans, so that newer technologies may be developed upon this foundation. Compared to existing treatments, such as microfracture or autologous chondrocyte implantation, a tissue engineered product can potentially provide more consistent clinical results in forming hyaline repair tissue and in filling the entirety of the defect. The various tissue engineering strategies (e.g., cell expansion, scaffold material, media formulations, biomimetic stimuli, etc.) used in forming these products, as collected from published literature, company websites, and relevant patents, are critically discussed. The authors note that many details about these products remain proprietary, not all information is made public, and that advancements to the products are continuously made. Nevertheless, by understanding the design and production processes of these emerging technologies, one can gain tremendous insight into how to best use them and also how to design the next generation of tissue engineered cartilage products.

The Function of Naringin in Inducing Secretion of Osteoprotegerin and Inhibiting Formation of Osteoclasts

Osteoporosis has become one of the most prevalent and costly diseases in the world. It is a metabolic disease characterized by reduction in bone mass due to an imbalance between bone formation and resorption. Osteoporosis causes fractures, prolongs bone healing, and impedes osseointegration of dental implants. Its pathological features include osteopenia, degradation of bone tissue microstructure, and increase of bone fragility. In traditional Chinese medicine, the herb Rhizoma Drynariae has been commonly used to treat osteoporosis and bone nonunion. However, the precise underlying mechanism is as yet unclear. Osteoprotegerin is a cytokine receptor shown to play an important role in osteoblast differentiation and bone formation. Hence, activators and ligands of osteoprotegerin are promising drug targets and have been the focus of studies on the development of therapeutics against osteoporosis. In the current study, we found that naringin could synergistically enhance the action of 1α,25-dihydroxyvitamin D3 in promoting the secretion of osteoprotegerin by osteoblasts in vitro. In addition, naringin can also influence the generation of osteoclasts and subsequently bone loss during organ culture. In conclusion, this study provides evidence that natural compounds such as naringin have the potential to be used as alternative medicines for the prevention and treatment of osteolysis.

In vitro and in vivo bone formation potential of surface calcium phosphate-coated polycaprolactone and polycaprolactone/bioactive glass composite scaffolds

In this study, polycaprolactone (PCL)-based composite scaffolds containing 50wt% of 45S5 Bioglass(®) (45S5) or strontium-substituted bioactive glass (SrBG) particles were fabricated into scaffolds using an additive manufacturing technique for bone tissue engineering purposes. The PCL scaffolds were surface coated with calcium phosphate (CaP) to enable further comparison of the osteoinductive potential of different scaffolds: PCL (control), PCL/CaP-coated, PCL/50-45S5 and PCL/50-SrBG scaffolds. The PCL/50-45S5 and PCL/50-SrBG composite scaffolds were reproducibly manufactured with a morphology highly resembling that of PCL only scaffolds. However, 50wt% loading of the bioactive glass (BG) particles into the PCL bulk decreased the scaffold's compressive Young's modulus. Coating of PCL scaffolds with CaP had a negligible effect on the scaffold's porosity and compressive Young's modulus. When immersed in culture media, BG dissolution ions (Si and Sr) were detected for up to 10weeks in the immersion media and surface precipitates were formed on both PCL/50-45S5 and PCL/50-SrBG scaffolds' surfaces, indicating good in vitro bioactivity. In vitro cell studies were conducted using sheep bone marrow stromal cells (BMSCs) under non-osteogenic or osteogenic conditioned media, and under static or dynamic culture environments. All scaffolds were able to support cell adhesion, growth and proliferation. However, when cultured in non-osteogenic media, only PCL/CaP, PCL/50-45S5 and PCL/50-SrBG scaffolds showed an up-regulation of osteogenic gene expression. Additionally, under a dynamic culture environment, the rate of cell growth, proliferation and osteoblast-related gene expression was enhanced across all scaffold groups. Subsequently, PCL/CaP, PCL/50-45S5 and PCL/50-SrBG scaffolds, with or without seeded cells, were implanted subcutaneously into nude rats for the evaluation of osteoinductivity potential. After 8 and 16weeks, host tissue infiltrated well into the scaffolds, but no mature bone formation was observed in any scaffolds groups.

STATEMENT OF SIGNIFICANCE

This novelty of this research work is that it provide a comprehensive comparison, both in vitro and in vivo, between 3 different composite materials widely used in the field of bone tissue engineering for their bone regeneration capabilities. The materials used in this study include polycaprolactone, 45S5 Bioglass, strontium-substituted bioactive glass and calcium phosphate. Additionally, the composite materials were fabricated into the form of 3D scaffolds using additive manufacturing technique, a widely used technique in tissue engineering.

Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation

Three-dimensional (3D) printing offers versatile possibilities for adapting the structural parameters of tissue engineering scaffolds. However, it is also essential to develop procedures allowing efficient cell seeding independent of scaffold geometry and pore size. The aim of this study was to establish a method for seeding the scaffolds using photopolymerizable cell-laden hydrogels. The latter facilitates convenient preparation, and handling of cell suspension, while distributing the hydrogel precursor throughout the pores, before it is cross-linked with light. In addition, encapsulation of living cells within hydrogels can produce constructs with high initial cell loading and intimate cell-matrix contact, similar to that of the natural extra-cellular matrix (ECM). Three dimensional scaffolds were produced from poly(lactic) acid (PLA) by means of fused deposition modeling. A solution of methacrylamide-modified gelatin (Gel-MOD) in cell culture medium containing photoinitiator Li-TPO-L was used as a hydrogel precursor. Being an enzymatically degradable derivative of natural collagen, gelatin-based matrices are biomimetic and potentially support the process of cell-induced remodeling. Preosteoblast cells MC3T3-E1 at a density of 10 × 10⁶ cells per 1 mL were used for testing the seeding procedure and cell proliferation studies. Obtained results indicate that produced constructs support cell survival and proliferation over extended duration of our experiment. The established two-step approach for scaffold seeding with the cells is simple, rapid, and is shown to be highly reproducible. Furthermore, it enables precise control of the initial cell density, while yielding their uniform distribution throughout the scaffold. Such hybrid tissue engineering constructs merge the advantages of rigid 3D printed constructs with the soft hydrogel matrix, potentially mimicking the process of ECM remodeling.

Harnessing biomechanics to develop cartilage regeneration strategies

As this review was prepared specifically for the American Society of Mechanical Engineers H.R. Lissner Medal, it primarily discusses work toward cartilage regeneration performed in Dr. Kyriacos A. Athanasiou's laboratory over the past 25 years. The prevalence and severity of degeneration of articular cartilage, a tissue whose main function is largely biomechanical, have motivated the development of cartilage tissue engineering approaches informed by biomechanics. This article provides a review of important steps toward regeneration of articular cartilage with suitable biomechanical properties. As a first step, biomechanical and biochemical characterization studies at the tissue level were used to provide design criteria for engineering neotissues. Extending this work to the single cell and subcellular levels has helped to develop biochemical and mechanical stimuli for tissue engineering studies. This strong mechanobiological foundation guided studies on regenerating hyaline articular cartilage, the knee meniscus, and temporomandibular joint (TMJ) fibrocartilage. Initial tissue engineering efforts centered on developing biodegradable scaffolds for cartilage regeneration. After many years of studying scaffold-based cartilage engineering, scaffoldless approaches were developed to address deficiencies of scaffold-based systems, resulting in the self-assembling process. This process was further improved by employing exogenous stimuli, such as hydrostatic pressure, growth factors, and matrix-modifying and catabolic agents, both singly and in synergistic combination to enhance neocartilage functional properties. Due to the high cell needs for tissue engineering and the limited supply of native articular chondrocytes, costochondral cells are emerging as a suitable cell source. Looking forward, additional cell sources are investigated to render these technologies more translatable. For example, dermis isolated adult stem (DIAS) cells show potential as a source of chondrogenic cells. The challenging problem of enhanced integration of engineered cartilage with native cartilage is approached with both familiar and novel methods, such as lysyl oxidase (LOX). These diverse tissue engineering strategies all aim to build upon thorough biomechanical characterizations to produce functional neotissue that ultimately will help combat the pressing problem of cartilage degeneration. As our prior research is reviewed, we look to establish new pathways to comprehensively and effectively address the complex problems of musculoskeletal cartilage regeneration.

Anti-inflammatory strategies in cartilage repair

Cartilage defects are normally concomitant with posttraumatic inflammation and pose a major challenge in cartilage repair. Due to the avascular nature of cartilage and its inability to surmount an inflammatory response, the cartilage is easily attacked by proinflammatory factors and oxidative stress; if left untreated, osteoarthritis may develop. Suppression of inflammation has always been a crux for cartilage repair. Pharmacological drugs have been successfully applied in cartilage repair; however, they cannot optimally work alone. This review article will summarize current pharmacological drugs and their application in cartilage repair. The development of extracellular matrix-based scaffolds and preconditioned tissue-specific stem cells will be emphasized because both of these tissue engineering components could contribute to an enhanced ability not only for cartilage regeneration but also for anti-inflammation. These strategies could be combined to boost cartilage repair under inflammatory conditions.

Bioglass®/chitosan-polycaprolactone bilayered composite scaffolds intended for osteochondral tissue engineering

Polymer-coated 45S5 Bioglass(®) (BG)/chitosan-polycaprolactone (BG/CS-PCL) bilayered composite scaffolds were prepared via foam replication and freeze-drying techniques for application in osteochondral tissue engineering. The CS-PCL coated and uncoated BG scaffolds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The mechanical properties of the coated scaffolds were significantly improved in comparison to uncoated scaffolds. The bioactivity and biodegradation behavior of scaffolds were studied in simulated body fluid (SBF) for up to 28 days. The interface between the BG scaffold and the polymer coating layer was observed by SEM and a suitable interpenetration of the polymer into the scaffold struts was found. The effects of coated and uncoated BG scaffolds on MG-63 osteoblast-like cells were evaluated by cell viability, adhesion and proliferation.

Use of perfusion bioreactors and large animal models for long bone tissue engineering

Tissue engineering and regenerative medicine (TERM) strategies for generation of new bone tissue includes the combined use of autologous or heterologous mesenchymal stem cells (MSC) and three-dimensional (3D) scaffold materials serving as structural support for the cells, that develop into tissue-like substitutes under appropriate in vitro culture conditions. This approach is very important due to the limitations and risks associated with autologous, as well as allogenic bone grafiting procedures currently used. However, the cultivation of osteoprogenitor cells in 3D scaffolds presents several challenges, such as the efficient transport of nutrient and oxygen and removal of waste products from the cells in the interior of the scaffold. In this context, perfusion bioreactor systems are key components for bone TERM, as many recent studies have shown that such systems can provide dynamic environments with enhanced diffusion of nutrients and therefore, perfusion can be used to generate grafts of clinically relevant sizes and shapes. Nevertheless, to determine whether a developed tissue-like substitute conforms to the requirements of biocompatibility, mechanical stability and safety, it must undergo rigorous testing both in vitro and in vivo. Results from in vitro studies can be difficult to extrapolate to the in vivo situation, and for this reason, the use of animal models is often an essential step in the testing of orthopedic implants before clinical use in humans. This review provides an overview of the concepts, advantages, and challenges associated with different types of perfusion bioreactor systems, particularly focusing on systems that may enable the generation of critical size tissue engineered constructs. Furthermore, this review discusses some of the most frequently used animal models, such as sheep and goats, to study the in vivo functionality of bone implant materials, in critical size defects.

The future of microfluidic assays in drug development

BACKGROUND

Microfluidic technology emerges as a convenient route to applying automated and reliable assays in a high-throughput manner with low cost.

OBJECTIVE

This review aims to answer questions related to the capabilities and potential applications of microfluidic assays that can benefit the drug development process and extends an outlook on its future trends.

METHODS

This article reviews recent publications in the field of microfluidics, with an emphasis on novel applications for drug development.

RESULTS/CONCLUSION

Microfluidics affords unique capabilities in sample preparation and separation, combinatorial synthesis and array formation, and incorporating nanotechnology for more functionalities. The pharmaceutical industry, facing challenges from limited productivity and accelerated competition, can thus greatly benefit from applying new microfluidic assays in various drug development stages, from target screening and lead optimization to absorption distribution metabolism elimination and toxicity studies in preclinical evaluations, diagnostics in clinical trials and drug formulation and manufacturing process optimization.

The "artificial artery" as in vitro perfusion model

Metabolic stimuli, pressure, and fluid shear stress (FSS) are major mediators of vascular plasticity. The exposure of the vessel wall to increased laminar FSS is the main trigger of arteriogenesis, the remodelling of pre-existent arterio-arteriolar anastomoses to functional conductance arteries. In this study, we have used an in vitro bioreactor to investigate cell-specific interactions, molecular mechanisms as well as time-dependent effects under laminar FSS conditions. This bioreactor termed “artificial artery” can be used for screening potential arterio-protective substances, pro-arteriogenic factors, and for investigating biomarkers of cardiovascular diseases such as cardiac diseases. The bioreactor is built up out of 14 hollow fiber membranes colonized with endothelial cells (HUVECs) on the inside and smooth muscle cells (HUASMCs) on the outside. By means of Hoechst 33342 staining as well as immunocytochemistry of ß-catenin and α-smooth-muscle-actin, a microporous polypropylene membrane was characterized as being the appropriate polymer for co-colonization. Defined arterial flow conditions (0.1 N/m2 and 3 N/m2), metabolic exchange, and cross-talk of HUVECs and HUASMCs through hollow fibers mimic physiological in vivo conditions of the vasculature. Analysing mono- and co-culture secretomes by MALDI-TOF-TOF mass spectrometry, we could show that HUVECs secreted Up4A upon 3 N/m2. A constant cellular secretion of randomly chosen peptides verified viability of the “artificial artery” for a cultivation period up to five days. qRT-PCR analyses revealed an up-regulation of KLF2 and TIMP1 as mechano-regulated genes and demonstrated arterio-protective, homeostatic FSS conditions by a down-regulation of EDN1. Expression analyses of VWF and EDN1 furthermore confirmed that RNA of both cell types could separately be isolated without cross-contamination. CCND1 mRNA expression in HUVECs did not change upon FSS indicating a quiescent endothelial phenotype. Taken together, the “artificial artery” provides a solid in vitro model to test pharmacological active compounds for their impact on arterio-damaging or arterio-protective properties on vascular response.

Time-dependent processes in stem cell-based tissue engineering of articular cartilage

Articular cartilage (AC), situated in diarthrodial joints at the end of the long bones, is composed of a single cell type (chondrocytes) embedded in dense extracellular matrix comprised of collagens and proteoglycans. AC is avascular and alymphatic and is not innervated. At first glance, such a seemingly simple tissue appears to be an easy target for the rapidly developing field of tissue engineering. However, cartilage engineering has proven to be very challenging. We focus on time-dependent processes associated with the development of native cartilage starting from stem cells, and the modalities for utilizing these processes for tissue engineering of articular cartilage.

Successful development of small diameter tissue-engineering vascular vessels by our novel integrally designed pulsatile perfusion-based bioreactor

Small-diameter (<4 mm) vascular constructs are urgently needed for patients requiring replacement of their peripheral vessels. However, successful development of constructs remains a significant challenge. In this study, we successfully developed small-diameter vascular constructs with high patency using our integrally designed computer-controlled bioreactor system. This computer-controlled bioreactor system can confer physiological mechanical stimuli and fluid flow similar to physiological stimuli to the cultured grafts. The medium circulating system optimizes the culture conditions by maintaining fixed concentration of O₂ and CO₂ in the medium flow and constant delivery of nutrients and waste metabolites, as well as eliminates the complicated replacement of culture medium in traditional vascular tissue engineering. Biochemical and mechanical assay of newly developed grafts confirm the feasibility of the bioreactor system for small-diameter vascular engineering. Furthermore, the computer-controlled bioreactor is superior for cultured cell proliferation compared with the traditional non-computer-controlled bioreactor. Specifically, our novel bioreactor system may be a potential alternative for tissue engineering of large-scale small-diameter vascular vessels for clinical use.

One-step articular cartilage repair: combination of in situ bone marrow stem cells with cell-free poly(L-lactic-co-glycolic acid) scaffold in a rabbit model

Focal full-thickness articular cartilage defects are challenging to repair. The purpose of this study was to find a simple, effective 1-step articular cartilage repair method. Because stem cell niches produce a microenvironment for stem cell self-renewal, proliferation, and differentiation, we integrated in situ bone marrow stem cells with an implanted poly(L-lactic-co-glycolic acid) (PLLGA) scaffold. Marrow stem cells grew and proliferated on cell-free PLLGA scaffolds, which were evaluated by scanning electronic microscopy (SEM) and Cell Counting Kit-8 (Dojindo, Kumamoto, Japan). Twenty-seven rabbits (54 knees) with large cylinder femoral trochlear cartilage defects were created and repaired with microfracture and cell-free PLLGA scaffold implantation (group 1), microfracture (group 2), or cell-free PLLGA scaffold implantation (group 3).Outcomes were evaluated by magnetic resonance imaging, International Cartilage Repair Society scores, histology, and immunohistochemistry. The repair effects were better in group 1 than in groups 2 and 3. In group 1, hyaline-like cartilage formed at week 24. Magnetic resonance imaging showed homogeneous signals as the adjacent normal cartilage. Collagen type II and toluidine blue were stained positively as normal cartilage tissue, and the color and thickness of regenerated tissue were similar to surrounding normal tissue. The combination of microfracture and cell-free PLLGA scaffold implantation used endogenous marrow stem cells in situ and promoted hyaline-like cartilage regeneration rapidly and effectively.

Microfabricated biomaterials for engineering 3D tissues

Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.

Extracellular matrix deposited by synovium-derived stem cells delays replicative senescent chondrocyte dedifferentiation and enhances redifferentiation

The aim of this study was to assess the effect of extracellular matrix (ECM) deposited by synovium-derived stem cells (SDSCs) on articular chondrocyte expansion and maintenance of differentiation status and redifferentiation capacity. Passage 0 (P0) pig articular chondrocytes were expanded for six passages on plastic flasks (Plastic), SDSC-derived ECM (ECM), or substrate switching from either Plastic to ECM (PtoE) or ECM to Plastic (EtoP). Cell morphology, gene expression profiles, and immunophenotypes at each passage were used to characterize differentiation status of expanded cells. Chondrocytes at P0, P2, and P6 were assessed for redifferentiation capacity in a pellet culture system treated with either TGF-β1- or serum-containing medium for 14 days, using histology, immunohistochemistry, biochemistry, Western blot, and real-time PCR. We found that ECM not only greatly enhanced chondrocyte expansion but also delayed dedifferentiation of expanded chondrocytes. Intriguingly, compared to a dramatic decrease in CD90+/CD105+ cells and CD90+ cells, CD105+ cells dramatically increased when chondrocytes were plated on Plastic; on the contrary, ECM expansion dramatically increased CD90+ cells and delayed the decrease of CD90+/CD105+ cells. Interestingly, expanded chondrocytes on ECM also acquired a strong redifferentiation capacity, particularly in the pellets treated with TGF-β1. In conclusion, the ratio of CD90 to CD105 may serve as a marker indicative of proliferation and redifferentiation capacity of dedifferentiated chondrocytes. ECM deposited by SDSCs provides a tissue-specific three-dimensional microenvironment for ex vivo expansion of articular chondrocytes while retaining redifferentiation capacity, suggesting that ECM may provide a novel approach for autologous chondrocyte-based cartilage repair.

Novel strategies to engineering biological tissue in vitro

Tissue engineering creates biological tissues that aim to improve the function of diseased or damaged tissues. In this chapter, we examine the promise and shortcomings of "top-down" and "bottom-up" approaches for creating engineered biological tissues. In top-down approaches, the cells are expected to populate the scaffold and create the appropriate extracellular matrix and microarchitecture often with the aid of a bioreactor that furnish the set of stimuli required for an optimal cellular viability. Specifically, we survey the role of cell material interaction on oxygen metabolism in three-dimensional (3D) in vitro cultures as well as the time and space evolution of the transport and biophysical properties during the development of de novo synthesized tissue-engineered constructs. We show how to monitor and control the evolution of these parameters that is of crucial importance to process biohybrid constructs in vitro as well as to elaborate reliable mathematical model to forecast tissue growth under specific culture conditions. Furthermore, novel strategies such as bottom-up approaches to build tissue constructs in vitro are examined. In this fashion, tissue building blocks with specific microarchitectural features are used as modular units to engineer biological tissues from the bottom up. In particular, the attention will be focused on the use of cell seeded microbeads as functional building blocks to realize 3D complex tissue. Finally, a challenge will be the potential integration of bottom-up techniques with more traditional top-down approaches to create more complex tissues than are currently achievable using either technique alone by optimizing the advantages of each technique.

The application of three-dimensional collagen-scaffolds seeded with myoblasts to repair skeletal muscle defects

Three-dimensional (3D) engineered tissue constructs are a novel and promising approach to tissue repair and regeneration. 3D tissue constructs have the ability to restore form and function to damaged soft tissue unlike previous methods, such as plastic surgery, which are able to restore only form, leaving the function of the soft tissue often compromised. In this study, we seeded murine myoblasts (C2C12) into a collagen composite scaffold and cultured the scaffold in a roller bottle cell culture system in order to create a 3D tissue graft in vitro. The 3D graft created in vitro was then utilized to investigate muscle tissue repair in vivo. The 3D muscle grafts were implanted into defect sites created in the skeletal muscles in mice. We detected that the scaffolds degraded slowly over time, and muscle healing was improved which was shown by an increased quantity of innervated and vascularized regenerated muscle fibers. Our results suggest that the collagen composite scaffold seeded with myoblasts can create a 3D muscle graft in vitro that can be employed for defect muscle tissue repair in vivo.

COMPUTATIONAL FLUID DYNAMICS FOR TISSUE ENGINEERING APPLICATIONS

Hydrodynamic cellular environment plays an important role in translating engineered tissue constructs into clinically useful grafts. However, the cellular fluid dynamic environment inside bioreactor systems is highly complex and it is normally impractical to experimentally characterize the local flow patterns at the cellular scale. Computational fluid dynamics (CFD) has been recognized as an invaluable and reliable alternative to investigate the complex relationship between hydrodynamic environments and the regeneration of engineered tissues at both the macroscopic and microscopic scales. This review describes the applications of CFD simulations to probe the hydrodynamic environment parameters (e.g., flow rate, shear stress, etc.) and the corresponding experimental validations. We highlight the use of CFD to optimize bioreactor design and scaffold architectures for improved ex-vivo hydrodynamic environments. It is envisioned that CFD could be used to customize specific hydrodynamic cellular environments to meet the unique requirements of different cell types in combination with advanced manufacturing techniques and finally facilitate the maturation of tissue-engineered constructs.

Tensile properties, collagen content, and crosslinks in connective tissues of the immature knee joint

BACKGROUND

The major connective tissues of the knee joint act in concert during locomotion to provide joint stability, smooth articulation, shock absorption, and distribution of mechanical stresses. These functions are largely conferred by the intrinsic material properties of the tissues, which are in turn determined by biochemical composition. A thorough understanding of the structure-function relationships of the connective tissues of the knee joint is needed to provide design parameters for efforts in tissue engineering.

METHODOLOGY/PRINCIPAL FINDINGS

The objective of this study was to perform a comprehensive characterization of the tensile properties, collagen content, and pyridinoline crosslink abundance of condylar cartilage, patellar cartilage, medial and lateral menisci, cranial and caudal cruciate ligaments (analogous to anterior and posterior cruciate ligaments in humans, respectively), medial and lateral collateral ligaments, and patellar ligament from immature bovine calves. Tensile stiffness and strength were greatest in the menisci and patellar ligament, and lowest in the hyaline cartilages and cruciate ligaments; these tensile results reflected trends in collagen content. Pyridinoline crosslinks were found in every tissue despite the relative immaturity of the joints, and significant differences were observed among tissues. Notably, for the cruciate ligaments and patellar ligament, crosslink density appeared more important in determining tensile stiffness than collagen content.

CONCLUSIONS/SIGNIFICANCE

To our knowledge, this study is the first to examine tensile properties, collagen content, and pyridinoline crosslink abundance in a direct head-to-head comparison among all of the major connective tissues of the knee. This is also the first study to report results for pyridinoline crosslink density that suggest its preferential role over collagen in determining tensile stiffness for certain tissues.

Integration of hollow fiber membranes improves nutrient supply in three-dimensional tissue constructs

Sufficient nutrient and oxygen transport is a potent modulator of cell proliferation in in vitro tissue-engineered constructs. The lack of oxygen and culture medium can create a potentially lethal environment and limit cellular metabolic activity and growth. Diffusion through scaffold and multi-cellular tissue typically limits transport in vitro, leading to potential hypoxic regions and reduction in the viable tissue thickness. For the in vitro generation of clinically relevant tissue-engineered grafts, current nutrient diffusion limitations should be addressed. Major approaches to overcoming these include culture with bioreactors, scaffolds with artificial microvasculature, oxygen carriers and pre-vascularization of the engineered tissues. This study focuses on the development and utilization of a new perfusion culture system to provide adequate nutrient delivery to cells within large three-dimensional (3D) scaffolds. Perfusion of oxygenated culture medium through porous hollow fiber (HF) integrated within 3D free form fabricated (FFF) scaffolds is proposed. Mouse pre-myoblast (C2C12) cells cultured on scaffolds of poly(ethylene-oxide-terephthalate)-poly(butylene-terephthalate) block copolymer (300PEOT55PBT45) integrated with porous HF membranes of modified poly(ether-sulfone) (mPES, Gambro GmbH) is used as a model system. Various parameters such as fiber transport properties, fiber spacing within a scaffold and medium flow conditions are optimized. The results show that four HF membranes integrated with the scaffold significantly improve the cell density and cell distribution. This study provides a basis for the development of a new HF perfusion culture methodology to overcome the limitations of nutrient diffusion in the culture of large 3D tissue constructs.

Bioreactor cultivation and remodelling simulation for cartilage replacement material

For the development of articular cartilage replacement material, it is essential to study the dependence between mechanical stimulation and cell activity in cellular specimens. Bioreactor cultivation is widely used for this purpose, however, it is hardly possible to obtain a quantitative relationship between collagen type II production and applied loading history. For this reason, a bioreactor system is developed, measuring applied forces and number of loading cycles by means of a load cell and a forked light barrier, respectively. Parallel to the experimental study, a numerical model by means of the finite element method is proposed to simulate the evolution of material properties during cyclic stimulation. In this way, a numerical model can be developed for arbitrary deformation cases.

A semi-degradable composite scaffold for articular cartilage defects

Few options exist to replace or repair damaged articular cartilage. The optimal solution that has been suggested is a scaffold that can carry load and integrate with surrounding tissues; but such a construct has thus far been elusive. The objectives of this study were to manufacture and characterize a nondegradable hydrated scaffold. Our hypothesis was that the polymer content of the scaffold can be used to control its mechanical properties, while an internal porous network augmented with biological agents can facilitate integration with the host tissue. Using a two-step water-in-oil emulsion process a porous polyvinyl alcohol (PVA) hydrogel scaffold combined with alginate microspheres was manufactured. The scaffold had a porosity of 11-30% with pore diameters of 107-187 μm, which readily allowed for movement of cells through the scaffold. Alginate microparticles were evenly distributed through the scaffold and allowed for the slow release of biological factors. The elastic modulus (Es ) and Poisson's ratio (υ), Aggregate modulus (Ha ) and dynamic modulus (ED ) of the scaffold were significantly affected by % PVA, as it varied from 10 to 20% wt/vol. Es and υ were similar to that of articular cartilage for both polymer concentrations, while Ha and ED were similar to that of cartilage only at 20% PVA. The ability to control scaffold mechanical properties, while facilitating cellular migration suggest that this scaffold is a potentially viable candidate for the functional replacement of cartilage defects.

Factors of osteogenesis influencing various human stem cells on third-generation gelatin/β-tricalcium phosphate scaffold material

Human bone marrow-derived stem cells (hBMSCs) and adipose-derived stem cells (hASCs) have been used to regenerate bone. Both sources are claimed to have comparable osteogenic potential, but few comparative studies are available. Third-generation biomaterials have been developed to reduce steps in regenerating tissues. For osteogenesis gelatin/β-tricalcium phosphate (β-TCP) scaffolds with incorporated controlled-release bone morphogenetic protein-2 (BMP-2) as third-generation biomaterials were recently developed. So far, few studies on protein-induced osteogenesis versus chemical-induced osteogenesis have been performed. This study evaluates the osteogenic potential of hBMSCs versus hASCs derived on gelatin/β-TCP scaffolds in vitro under four different conditions. Gelatin/β-TCP scaffolds with and without incorporated controlled-release BMP-2 were seeded with hBMSCs or hASCs under oscillating fluid conditions in osteogenic (OS) medium or growth medium (GM). All were evaluated radiologically (computed tomography [CT] scan), histologically, biomechanically, and for gene expression at 1, 2, 4, and 6 weeks. The highest radiological densities were seen in specimens at 6 weeks with controlled-release BMP-2, close to native bone. HBMSCs, hASCs, OS, and GM conditions resulted in similar bone formation with gelatin/β-TCP scaffolds and incorporated controlled-release BMP-2. This was confirmed histologically by Toluidine Blue and van Kossa staining and biomechanically. Gene expression studies of these specimens showed the presence of preosteoblasts, transitory osteoblasts, and secretory osteoblasts. Specimens comprised of gelatin/β-TCP scaffolds without incorporated controlled release BMP-2 in OS medium showed lesser bone formation. hASCs and hBMSCs have similar osteogenic potential. hASCs are an attractive alternative to hBMSCs for bone regeneration using third-generation gelatin/β-TCP scaffolds with incorporated controlled-release BMP-2.

Microplate-reader compatible perfusion microbioreactor array for modular tissue culture and cytotoxicity assays

One important application of tissue engineering is to provide novel in vitro models for cell-based assays. Perfusion microbioreactor array provides a useful tool for microscale tissue culture in parallel. However, high-throughput data generation has been a challenge. In this study, a 4 x 4 array of perfusion microbioreactors was developed for plate-reader compatible, time-series quantification of cell proliferation, and cytotoxicity assays. The device was built through multilayer soft lithography. Low-cost nonwoven polyethylene terephthalate fibrous matrices were integrated as modular tissue culture scaffolds. Human colon cancer HT-29 cells with stable expression of enhanced green fluorescent protein were cultured in the device with continuous perfusion and reached a cell density over 5 x 10(7) cells/mL. The microbioreactor array was used to test a chemotherapeutic drug 5-FU for its effect on HT-29 cells in continuous perfusion 3D culture. Compared with conventional 2D cytotoxicity assay, significant drug resistance was observed in the 3D perfusion culture.

The effect of type II collagen coating of chitosan fibrous scaffolds on mesenchymal stem cell adhesion and chondrogenesis

The biocompatibility of chitosan and its similarity to glycosaminoglycans (GAG) make it attractive for cartilage tissue engineering. We have previously reported improved chondrogenesis but limited cell adhesion on chitosan scaffolds. Our objectives were to produce chitosan scaffolds coated with different densities of type II collagen and to evaluate the effect of this coating on mesenchymal stem cell (MSC) adhesion and chondrogenesis. Chitosan fibrous scaffolds were obtained by a wet spinning method and coated with type II collagen at two different densities. A polyglycolic acid mesh served as a reference group. The scaffolds were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and type II collagen content. Constructs were analyzed after MSCs seeding via live/dead assay, weight and DNA evaluations, SEM, and TEM. Constructs were cultured in chondrogenic medium for 21 days prior to quantitative analysis (weight, DNA, and GAG), SEM, TEM, histology, immunohistochemistry, and quantitative real time polymerase chain reaction. The cell attachment and distribution after seeding correlated with the density of type II collagen. The cell number, the matrix production, and the expression of genes specific for chondrogenesis were improved after culture in collagen coated chitosan constructs. These findings encourage the use of type II collagen for coating chitosan scaffolds to improve MSCs adhesion and chondrogenesis, and confirm the importance of biomimetic scaffolds for tissue engineering.