Benzophenones

An evaluation of dogs' exposure to benzophenones through hair sample analysis

Introduction

Benzophenones (BPs) are used in various branches of industry as ultraviolet radiation filters, but they pollute the natural environment, penetrate living organisms, and disrupt endocrine balance. Knowledge of the exposure of domestic animals to these substances is extremely scant. The aim of the study was to investigate long-term exposure of companion dogs to BPs and relate this to environmental factors.

Material and Methods

Hair samples taken from 50 dogs and 50 bitches from under 2 to over 10 years old were analysed for BP content with liquid chromatography-tandem mass spectrometry.

Results

The results revealed that dogs are most often exposed to 2-hydroxy-4-methoxybenzophenone (BP-3) and 4-dihydroxybenzophenone (BP-1). Concentration levels of BP-3 above the method quantification limit (MQL) were noted in 100% of the samples and fluctuated from 4.75 ng/g to 1,765 ng/g. In turn, concentration levels of BP-1 above the MQL were noted in 37% of the samples and ranged from <0.50 ng/g to 666 ng/g. Various factors (such as the use of hygiene and care products and the dog's diet) were found to affect BP concentration levels. Higher levels of BP-3 were observed in castrated/spayed animals and in animals that required veterinary intervention more often.

Conclusion

The results obtained show that the analysis of hair samples may be a useful matrix for biomonitoring BPs in dogs, and that these substances may be toxic to them.

New trends on personalized sunscreens

BACKGROUND/PURPOSE

Nowadays, there are emerging trends in customized and personalized photoprotection, focusing on the innovative approaches to enhance sun protection efficacy tailored to individual needs.

METHODS

We conducted an electronic search of the following databases: MEDLINE, EMBASE, Cochrane Database of Systematic Reviews, Cochrane Skin Group Specialised Skin Register, and TESEO. Specific search terms related to personalized photoprotection and the variables of age, genetic predisposition, skin phototype, photodermatosis, and physiological conditions such as pregnancy, as well as lifestyle habits were used.

RESULTS/CONCLUSION

The article highlights the challenges and opportunities in adopting personalized photoprotection strategies, aiming to promote skin health and prevent the harmful effects of UV radiation in the era of precision medicine.

Toxicity of UV Filter Benzophenone-3 in Brine Shrimp Nauplii (Artemia salina) and Zebrafish (Danio rerio) Embryos

The benzophenone (BP) family, including oxybenzone (BP-3), a prevalent sunscreen ingredient and environmental contaminant, has raised concerns since the year 2005. This study investigated oxybenzone toxicity in zebrafish (Danio rerio) eleutheroembryos and brine shrimp (Artemia salina) nauplii, focusing on the LC50 and developmental impacts. Zebrafish embryos (0.100-1.50 mg/L BP-3, 96 h) and A. salina (0.100-5.00 mg/L BP-3, 48 h) were tested with ultrasound-assisted emulsified liquid-phase microextraction (UA-ELPME) used for zebrafish tissue analysis. HPLC-DAD determined BP-3 concentrations (highest: 0.74 ± 0.13 mg/L). Although no significant zebrafish embryo mortality or hatching changes occurred, developmental effects were evident. Lethal concentrations were determined (A. salina LC50 at 24 h = 3.19 ± 2.02 mg/L; D. rerio embryos LC50 at 24 h = 4.19 ± 3.60 mg/L), with malformations indicating potential teratogenic effects. A. salina displayed intestinal tract alterations and D. rerio embryos exhibited pericardial edema and spinal deformities. These findings highlight oxybenzone's environmental risks, posing threats to species and ecosystem health.

Maternal exposure to benzophenone derivatives and their impacts on offspring's birth outcomes in a Middle Eastern population

Widespread use of benzophenones (BPs), a group of environmental phenolic compounds, is suspected of interfering with human health. The association of prenatal exposure to benzophenone derivatives with birth outcomes including birth weight and length, head, arm and thoracic circumference, abnormalities, corpulence index and anterior fontanelle diameter (AFD) was investigated. Mother-infant pairs of 166 within PERSIAN cohort population in Isfahan, Iran, in the 1st and 3rd trimesters of pregnancy were assessed. Four common benzophenone metabolites including 2,4-dihydroxy benzophenone (BP-1), 2-hydroxy-4-methoxy benzophenone (BP-3), 4-hydroxy benzophenone (4-OH-BP) and 2,2'-dihydroxy-4-methoxy benzophenone (BP-8) were measured in maternal urine samples. The median concentration of 4-OH-BP, BP-3, BP-1 and BP-8 were 3.15, 16.98, 9.95 and 1.04 µg/g Cr, respectively. In the 1st trimester, 4-OH-BP showed a significant correlation with AFD in total infants, decreasing 0.034 cm AFD per a log unit increase of 4-OH-BP. Within the male neonates, 4-OH-BP in the 1st and BP-8 in the 3rd trimester were significantly associated with head circumference and AFD increase, respectively. Among female neonates in the 3rd trimester, increasing 4-OH-BP and BP-3 concentration was correlated with a decrease in birth weight and AFD, respectively. This study demonstrated that all the target BP derivatives can influence normal fetal growth at any age of the pregnancy, nevertheless, to support these findings further studies are needed in a large and different group population.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Patch Testing With Benzophenone-3 and -4: The North American Contact Dermatitis Group Experience, 2013-2020

Background: Benzophenone (BZP)-3 and BZP-4 are ultraviolet (UV) absorbers used in sunscreens and personal care products (PCPs) and may cause allergic contact dermatitis. Objective: To characterize positive patch test reactions to BZP-3 (10% in petrolatum [pet]) and BZP-4 (2% pet) in a screening allergen series. Methods: Retrospective analysis of patients tested to BZP-3 and BZP-4 was conducted by the North American Contact Dermatitis Group from 2013 to 2020. Results: Of 19,618 patients patch tested to BZP-3 and BZP-4, 103 (0.5%) and 323 (1.6%) had positive reactions, respectively: 413 (2.1%) reacted to at least 1 BZP (BZP-positive patient). As compared with BZP-negative patients, BZP-positive patients were significantly more likely to have a history of hay fever (39.3% vs 33.4%, P = 0.0134), history of atopic dermatitis (39.8% vs 30.7%, P = 0.0001), and facial involvement (37.4% vs 32.2%, P = 0.0272). Most reactions were currently clinically relevant (BZP-3: 90.4%; BZP-4: 65.8%). Common identified sources included PCPs and sunscreens. Coreactivity between BZP-3 and BZP-4 was low: 13.5% (14/104) of BZP-3-positive patients were allergic to BZP-4 and 4.3% (14/322) of BZP-4-positive patients were allergic to BZP-3. Conclusions: Eight-year prevalence of BZP positivity was 2.1%. Reactions were frequently clinically relevant and linked to PCPs and sunscreens.

Benzophenones in the Environment: Occurrence, Fate and Sample Preparation in the Analysis

The ubiquitous presence of emerging contaminants in the environment is an issue of great concern. Notably, for some of them, no established regulation exists. Benzophenones are listed as emerging contaminants, which have been identified in the environment as well as in human fluids, such as urine, placenta, and breast milk. Their accumulation and stability in the environment, combined with the revealed adverse effects on ecosystems including endocrine, reproductive, and other disorders, have triggered significant interest for research. Benzophenones should be extracted from environmental samples and determined for environmental-monitoring purposes to assess their presence and possible dangers. Numerous sample preparation methods for benzophenones in environmental matrices and industrial effluents have been proposed and their detection in more complex matrices, such as fish and sludges, has also been reported. These methods range from classical to more state-of-the-art methods, such as solid-phase extraction, dispersive SPE, LLE, SBSE, etc., and the analysis is mostly completed with liquid chromatography, using several detection modes. This review critically outlines sample preparation methods that have been proposed to date, for the extraction of benzophenones from simple and complex environmental matrices and for cleaning up sample extracts to eliminate potential interfering components that coexist therein. Moreover, it provides a brief overview of their occurrence, fate, and toxicity.

Occurrence and profile characteristics of environmental phenols in human urine from a rural area in Northwestern China

Many environmental phenols, such as bisphenols, benzophenones and parabens, are known as endocrine disruptors and can adversely affect human health. However, the knowledge of human exposure to common environmental phenols in Chinese rural areas is insufficient. In this context, 181 urine samples were collected from participants in a rural area in Northwest China and were analyzed for nine bisphenols, three benzophenones and four parabens. Bisphenol A (BPA), bisphenol S, benzophenone-1 (BP-1), benzophenone-3 (BP-3), 4-hydroxybenzophenone, methylparaben (MeP), ethylparaben and propylparaben (PrP) were detected in more than 50% of the urine samples, with median concentrations of 0.938 ng/mL, 0.0111 ng/mL, 0.191 ng/mL, 1.30 ng/mL, 0.0320 ng/mL, 25.9 ng/mL, 4.31 ng/mL and 1.94 ng/mL, respectively. A significant positive correlation was observed between BP-1 and BP-3, as well as between MeP and PrP, indicating metabolic transformation and combined use, respectively. The concentrations of MeP and PrP in females were significantly higher than those in males, suggesting that females were exposed to more MeP and PrP than males. Urinary concentrations of BPA, BP-3, MeP and PrP could be influenced by age. Other demographic information, such as annual household income, education and occupation was not associated with the exposure level of the targeted phenols in adults. The estimated daily intakes of the analytes except BPA were all below their respective tolerable/acceptable daily intake levels. This study profiles the demographic differences in the exposure to environmental phenols in general populations from rural areas and provides information on risk assessments.

Benzoresorcinol induces developmental neurotoxicity and injures exploratory, learning and memorizing abilities in zebrafish

Benzophenones (BPs) are a class of UV absorber commonly used in skin care products like sunscreens. With its wide range of application, its environmental and human hazards have received much attention in recent days. Previous studies on the toxicity of BPs mainly focused on its endocrine-disrupting effects, but there are limited studies on its neurodevelopment and neurotoxicity. Herein, using the zebrafish model we studied the neurodevelopmental- and neuro-toxicity of benzophenone 1 (BP1) (0.8, 1.0, 1.2, 1.6, and 2.4 μg/mL). As a result, BP1 led to an increase of embryo mortality, a decrease in hatching rate, and an increase in the rate of developmental abnormalities in a concentration-dependent manner. BP1 also caused developmental defects in the central nervous system (CNS) and dopaminergic (DA) neurons. Accordingly, BP1 injured larval zebrafish general locomotion and response to stimuli in light/dark challenge. In adult zebrafish, BP1 exposure (1, 10, 100, 1000 μg/L) caused inhibition of learning and memory abilities in the T-maze tests, and inhibited exploratory behavior and activity in the novel tank diving tests. Further, transcription levels of genes related to neurotoxicity, neurodevelopment, and anxiety revealed that BP1 may affect the development and function of the myelin sheath, inducing structural and functional defects of CNS, manifested as abnormal behaviors such as anxiety. Hence, the current study revealed the neurodevelopmental toxicity and neurotoxicity of BP1, expanded our knowledge about the toxic effects of BP1 on organisms, posing a possible threat to the environment and human health.

Structure-related endocrine-disrupting potential of environmental transformation products of benzophenone-type UV filters: A review

Benzophenone-type UV filters (BPs) represent a very diverse group of chemicals that are used across a range of industrial sectors around the world. They are found within different environmental compartments (e.g. surface water, groundwater, wastewater, sediments and biota) at concentrations ranging from ng/L to mg/L. Some are known as endocrine disruptors and are currently within the scope of international regulations. A structural alert for high potential of endocrine disrupting activity was assigned to 11 BP derivatives. Due to the widespread use, distribution and disruptive effects of some BPs, knowledge of their elimination pathways is required. This review demonstrates that biodegradation and photolytic decomposition are the major elimination processes for BP-type UV filters in the environment. Under aerobic conditions, transformation pathways have only been reported for BP, BP-3 and BP-4, which are also the most common derivatives. Primary biodegradation mainly results in the formation of hydroxylated BPs, which exhibit a structure-related increase in endocrine activity when compared to their parent substances. By combining 76 literature-based transformation products (TPs) with in silico results relating to their receptor activity, it is demonstrated that 32 TPs may retain activity and that further knowledge of the degradation of BPs in the environment is needed.

Environmental Exposure to Non-Persistent Endocrine Disrupting Chemicals and Endometriosis: A Systematic Review

Endometriosis is a disease characterized by the presence of the uterine endometrium outside of its normal location. As the etiology of endometriosis is not well known and hormonal imbalance is central to disease pathogenesis, the potential contribution of exposure to endocrine-disrupting chemicals (EDCs) has been hypothesized in endometriosis. A systematic search of the literature was carried out to identify relevant studies using: PubMed, Scopus, Elsevier, Springer; EBSCO, and Web of Science. A total of 22 studies were considered. Most of the studies reviewed in this paper showed an association between exposure to BPA and phthalates and endometriosis. In the case of phthalate exposure, the reviewed studies found an association between the concentration of at least one phthalate metabolite and endometriosis. Only one study was performed to assess the exposure to parabens and a significant relationship with endometriosis was found. Additionally, only one study assessed the relationship of non-persistent pesticide exposure with endometriosis, observing a significant association between endometriosis and the urinary concentration of diazinon, chlorpyrifos, and chlorpyrifos-methyl. Studies struggled to provide a conclusion on the effect of exposure to benzophenones on endometriosis. Despite the numerous limitations of the results, the reviewed studies suggest that exposure to non-persistent endocrine disruptors, especially bisphenol A and phthalates may affect endometriosis. The results of the studies on exposure to parabens, benzophenones, and non-persistent insecticides are inconclusive.

The association of prenatal exposure to benzophenones with gestational age and offspring size at birth

In recent decades, emerging environmental pollutants such as endocrine-disrupting chemicals (EDCs) have become a particular concern. This study examined the association of maternal exposure to benzophenones as one of the EDCs with gestational age and evaluated their effects on birth outcomes including birth weight, birth length, head circumference, and Ponderal Index. We assessed 166 pregnant mothers of the PERSIAN cohort population of Isfahan, Iran, in the 1st and 3rd trimesters of pregnancy and their infants at birth. Four common benzophenones (BPs) including 2,4-dihydroxy benzophenone (BP-1), 2-hydroxy-4-methoxy benzophenone (BP-3), 4-hydroxy benzophenone (4-OH-BP), and 2,2'-dihydroxy-4-methoxy benzophenone (BP-8) were measured in maternal urine samples. The median urinary concentrations of 4-OH-BP, BP-3, BP-1, and BP-8 in the 1st trimester were 6.62, 7.5, 4.39, and 1.32 µg/g creatinine and those in the 3rd trimester were 3.15, 16.98, 9.95, and 1.04 µg/g creatinine, respectively. BP-3 was the predominant metabolite in both trimesters. There was a significant correlation between BP-3, BP-1, and 4-OH-BP levels (p < 0.05) but not BP-8. BP-1 showed a significant positive association with gestational age (GA) in all infants in the 1st trimester, but a negative association was observed between BP-3 and BP-1 levels and GA in girls. Classification of infants' birth weight for different GAs represented that the majority of them were appropriate for GA. However, boys' weights were heavier than girls. Also, birth outcomes of preterm (< 37 weeks) infants were noticeably lower than term infants (37-42 weeks). This study demonstrated that benzophenone derivatives especially BP-3 can affect the duration of pregnancy and consequently fetal growth in the early and late stages of pregnancy. This is more pronounced in girls; however, more investigations in a different population are needed to prove the results. Therefore, the application of these compounds as a UV protector requires precise regulation to reduce exposure, especially in pregnant women.

Identification of Benzophenone Analogs in Rice Cereal through Fast Pesticide Extraction and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

A fast, robust, and sensitive analytical method was developed and validated for the simultaneous identification of benzophenone (BP) and nine BP analogs (BP-1, BP-2, BP-3, BP-8, 2-hydroxybenzophenone, 4-hydroxybenzophenone, 4-methylbenzophenone [4-MBP], methyl-2-benzoylbenzoate, and 4-benzoylbiphenyl) in 25 samples of rice cereal. Fast pesticide extraction (FaPEx) coupled with ultrahigh-performance liquid chromatography-tandem mass spectrometry was applied. The developed method exhibited satisfactory linearity (r > 0.997), favorable recoveries between 71% and 119%, and a limit of detection ranging from 0.001 to 0.5 ng/g. The detection frequencies of BP, 4-MBP, and BP-3 were 100%, 88%, and 52%, respectively. BP had higher geometric levels, with a mean of 39.8 (19.1-108.9) ng/g, and 4-MBP had low levels, with a mean of 1.9 (1.3-3.3) ng/g. The method can be applied to routine rice cereal analysis at the nanogram-per-gram level. For infants aged 0-3 years, the hazard quotients of BP and 4-MBP were lower than one, and the margin of exposure for BP was higher than 10,000, suggesting that rice cereal consumption poses no health concern for Taiwanese infants.

A new case of photoallergic contact dermatitis caused by benzophenones in magazine covers

BACKGROUND

Allergic contact dermatitis (ACD) and photoallergic contact dermatitis (PACD) to benzophenone present in printing ink have been reported. However, precise chemical analyses and extended photo-patch tests have not been performed in these cases.

OBJECTIVES

To determine which component present in a magazine cover are responsible for a patient's skin reaction, determine the primary sensitiser and precisely diagnose ACD and PACD PATIENT AND METHODS: After initial photopatch tests were performed on a patient with a history of reaction to magazine covers after sun exposure, gas chromatography-mass spectrometry and high-performance liquid chromatography analyses of the magazine covers and additional photopatch tests were performed.

RESULTS

The first photopatch test results confirmed PACD to ketoprofen and fenofibrate, and evoked PACD to the magazine covers. 4-methyl benzophenone (4-MBP) and 1-hydroxy-cyclohexyl-phenyl-ketone (1-HCPK) were found in the magazine cover. Additional photopatch tests confirmed PACD to 1-HCPK and to benzophenone, and photo-aggravated ACD to 4-MBP. The primary sensitiser was ketoprofen.

CONCLUSIONS

Benzophenones are present in a wide variety of products, without always being listed on the packaging. Patients previously sensitised to other ketones, such as ketoprofen, may react to benzophenones without being able to avoid contact with these molecules. New regulations may be needed for more efficient eviction advice. This article is protected by copyright. All rights reserved.

Ultraviolet filter, fragrance and preservative allergens in New Zealand sunscreens

BACKGROUND/OBJECTIVES

Allergic contact dermatitis, photoallergic contact dermatitis and irritant reactions to sunscreens are common reasons for dermatology consultation. Patch testing for contact allergy relies on up-to-date knowledge of allergen exposures. The aim of this study was to investigate contact allergens and photoallergens in sunscreens commercially sold on the shelves of supermarkets and pharmacies in New Zealand.

METHODS

A comprehensive market data review of suppliers' websites was performed from March to August 2019 to obtain a list of the commonly sold sunscreens in our region. Ingredients were collated and analysed according to International Nomenclature of Cosmetic Ingredients (INCI) names. Ultraviolet (UV) filters, preservatives and fragrances were included for analysis. Place of sale and cost of sunscreens were also recorded.

RESULTS

Ninety-five sunscreens were analysed: 36% sold in supermarkets, 43% in pharmacies and the remainder available in both. The most frequent UV filters were butyl methoxydibenzoylmethane (contained in 70% of products) followed by octocrylene (63%) and homosalate (50%). The common photoallergen benzophenone 3 was found in 19% of products. Phenoxyethanol was the most common preservative (68%) followed by disodium EDTA (30%) and propylparaben (26%). Two sunscreens contained methylisothiazolinone. Sixty-one per cent contained at least one fragrance, the most frequent being limonene (17%) and linalool (13%). There was an average of 1.1 New Zealand baseline series allergens per product (range 0 to 6, standard deviation 1.27).

CONCLUSION

Common allergens including those with high sensitising potential were frequently found in New Zealand sunscreen. Knowledge of ingredients used by manufacturers is useful in dermatological assessment of skin contact reactions.

The Beneficial Effect of Rosmarinic Acid on Benzophenone-3-Induced Alterations in Human Skin Fibroblasts

Benzophenone-3 (BP-3) is one of the most widely used chemical sunscreens. The results of many in vitro and in vivo tests confirm its high percutaneous penetration and systemic absorption, which question the safety of its wide use. The aim of our research was to assess the effect of this compound on components of the skin extracellular matrix, and to investigate whether rosmarinic acid (RA) could reduce BP-3-induced changes in human skin fibroblasts. BP-3 used at concentrations of 0.1-100 µM caused a number of unfavorable changes in the level of type I collagen, decorin, sulfated glycosaminoglycans, hyaluronic acid, elastin, and expression or activity of matrix metalloproteinases (MMP-1, MMP-2), elastase and hyaluronidase. Moreover, the intracellular retention of collagen was accompanied by changes in the expression of proteins modifying and controlling the synthesis and secretion of this protein. Most importantly, RA at a concentration of 100 µM significantly reduced or completely abolished the adverse effects of BP-3. Based on these findings, it can be concluded that this polyphenol may provide effective protection against BP-3-induced disturbances in skin cells, which may have important clinical implications.

Epidemics of Dermatitis

Allergic contact dermatitis (ACD) remains a globally prevalent disease for both children and adults. The silent ACD epidemic continues to be fueled by the introduction of novel allergens in industrial and household products and the continued presence of known allergens. In 1997, Allan Dillarstone noted a sinusoidal pattern to epidemics when allergenic preservatives were replaced by alternative chemicals within the market, which then similarly increased in allergenicity. A call for public health vigilance and prevention initiatives is needed to intervene in the ACD epidemic.

Benzophenone Accumulates over Time from the Degradation of Octocrylene in Commercial Sunscreen Products

Benzophenone is a mutagen, carcinogen, and endocrine disruptor. Its presence in food products or food packaging is banned in the United States. Under California Proposition 65, there is no safe harbor for benzophenone in any personal care products, including sunscreens, anti-aging creams, and moisturizers. The purpose of this study was to determine (1) if benzophenone was present in a wide variety of commercial sun protection factor (SPF)/sunscreen products, (2) whether benzophenone concentration in the product increased over time, and (3) if the degradation of octocrylene was the likely source for benzophenone contamination. Benzophenone concentration was assayed in nine commercial sunscreen products from the European Union and eight from the United States (in triplicate), including two single ingredient sources of octocrylene. These same SPF items were subjected to the United States Food and Drug Administration (U.S. FDA)-accelerated stability aging protocol for 6 weeks. Benzophenone was measured in the accelerated-aged products. Sixteen octocrylene-containing product lines that were recently purchased had an average concentration of 39 mg/kg benzophenone, ranging from 6 mg/kg to 186 mg/kg. Benzophenone was not detectable in the product that did not contain octocrylene. After subjecting the 17 products to the U.S. FDA-accelerated stability method, the 16 octocrylene-containing products had an average concentration of 75 mg/kg, ranging from 9.8 mg/kg to 435 mg/kg. Benzophenone was not detectable in the product that did not contain octocrylene. Benzophenone was detected in the pure octocrylene manufactured ingredient. Octocrylene generates benzophenone through a retro-aldol condensation. In vivo, up to 70% of the benzophenone in these sunscreen products may be absorbed through the skin. U.S. FDA has established a zero tolerance for benzophenone as a food additive. In the United States, there were 2999 SPF products containing octocrylene in 2019. The safety of octocrylene as a benzophenone generator in SPF or any consumer products should be expeditiously reviewed by regulatory agencies.

A Case Report on Stomatitis Venenata Due to the Use of Lip Balm

Introduction:

Allergic reactions can manifest in various forms ranging from mild, almost unnoticeable reactions to life threatening anaphylaxis. Stomatitis venenata or contact stomatitis is described as a contact allergy of the oral mucosa which can occur due to repeated contact with the causative agent. Dental and cosmetic products, dental materials and dental therapeutic agents are the common allergens of the oral cavity. These allergies show varied clinical presentations, from swelling, pain, burning sensations to vesiculation, ulcerations, crusting and sloughing. Contact stomatitis due to cosmetic products have been on a rise recently due to the ease of availability and increase in their usage among individuals.

Aim:

The aim of this article is to present a case reports on an allergic reaction in a 17-year-old female triggered by the use of cosmetics.

Case report:

In the present article, we report a case of stomatitis venenata due to lip balm in a 17-year-old female for its rarity.

Conclusion:

Stomatitis venenata is a rare allergic condition that causes significant morbidity in an affected individual. Prompt recognition and elimination of the causative allergen followed by an appropriate therapy would help in complete resolution of this condition.

Photostability Testing of a Third-Generation Retinoid-Tazarotene in the Presence of UV Absorbers

Exposure of a drug to UV irradiation could affect its physicochemical properties. Hence, photostability testing is essential for topically administered drugs. Tazarotene, a receptor-selective, third-generation retinoid, is commonly used to treat acne vulgaris and psoriasis. In the present study, an in-depth analysis of the photostability of tazarotene in ethanolic solution in the presence of zinc oxide and/or titanium dioxide as well as benzophenone-type UV filters was performed. Eleven presumed products were derived from the photocatalytic degradation of tazarotene using ultra-performance liquid chromatography–tandem mass spectrometry, and transformation pathways were proposed. The degradation process mainly affected the 4,4-dimethyl-3,4-dihydro-2H-thiopyran moiety. The fragments most susceptible to oxidation were the methyl groups and the sulfur atom. Moreover, in the presence of sulisobenzone, under UV irradiation, tazarotene was subjected to a degradation process, which resulted in two photodecomposition products. In silico studies performed by OSIRIS Property Explorer demonstrated that five of the degradation products could be harmful in terms of the reproductive effects, which are associated with 3,4-dihydro-6-methyl-2H-1-benzothiopyran 1,1-dioxide, while one of them demonstrated potential irritant activity. The cytotoxic properties of the degradation products of tazarotene were assessed by MTT assay on a panel of human adherent cancer cells. Time- and concentration-dependent growth inhibition was evidenced in ovary (A2780) and breast (MDA-MB-231) cancer cell lines. The potential implication of the outcomes of the present research requires further studies mainly concerning the photostability of tazarotene in the topical formulations.

Unravelling the Photoprotective Mechanisms of Nature-Inspired Ultraviolet Filters Using Ultrafast Spectroscopy

There are several drawbacks with the current commercially available ultraviolet (UV) filters used in sunscreen formulations, namely deleterious human and ecotoxic effects. As a result of the drawbacks, a current research interest is in identifying and designing new UV filters. One approach that has been explored in recent years is to use nature as inspiration, which is the focus of this review. Both plants and microorganisms have adapted to synthesize their own photoprotective molecules to guard their DNA from potentially harmful UV radiation. The relaxation mechanism of a molecule after it has been photoexcited can be unravelled by several techniques, the ones of most interest for this review being ultrafast spectroscopy and computational methods. Within the literature, both techniques have been implemented on plant-, and microbial-inspired UV filters to better understand their photoprotective roles in nature. This review aims to explore these findings for both families of nature-inspired UV filters in the hope of guiding the future design of sunscreens.

Ultraviolet filters in sunscreen products labeled for use in children and for sensitive skin

BACKGROUND

The active ingredients in sunscreen products are ultraviolet (UV) filters, many of which are known potential allergens. The use of sunscreen in younger children and individuals with sensitive skin requires special attention, since absorption and allergen sensitization are of concern.

OBJECTIVE

This study aims to evaluate the ultraviolet filters in sunscreen products labeled specifically for "kids" or as "sensitive/hypoallergenic" and compare these to general sunscreen products.

METHODS

From December 2017 to March 2018, the ingredient labels on commercially available sunscreen products in Bangkok, Thailand, were analyzed.

RESULTS

Two hundred and forty-six sunscreen products were examined. Of these, twenty products (8.1%) were marketed for "kids." Forty-one products (16.6%) were labeled as "sensitive" or "hypoallergenic." Ethylhexyl methoxycinnamate (EHMC) and benzophenone-3 (BP3) were less prevalent in products for children [(P = .004) and (P = .029), respectively]. Eighty-five percent of sunscreen products labeled for kids contained at least one chemical UV filter. There was no significant difference between BP3, butyl methoxydibenzoylmethane (BMDM), and octocrylene (OCR) in products labeled for sensitive skin compared to products with no specific labels. Moreover, methylene bis-benzotriazolyl tetramethylbutylphenol (MBBT) was more commonly found in products for sensitive skin than in nonsensitive products (P = .001).

CONCLUSIONS

Common allergenic UV filters were found in sunscreens labeled as sensitive and for children. Regulations for displaying these specific labels should be established for improved benefits and safety to allergy-prone skin.

What is in? What is out? Updating the British Society for Cutaneous Allergy facial series

BACKGROUND

Allergic contact dermatitis (ACD) to cosmetics is widely reported. To ensure we are accurately diagnosing ACD, patch test series should be continually reviewed to identify relevant and emerging allergens and highlight those that are outdated. The current British Society for Cutaneous Allergy (BSCA) facial series recommends 26 allergens and was last modified in 2012.

OBJECTIVES

To review and update the BSCA facial series.

METHODS

We retrospectively reviewed the results from 12 UK and Ireland patch test centres' facial series from January 2016 to December 2017. We recorded the number of allergens tested in each centre and the detection rate for each allergen. Using a 0·3% positive rate as the inclusion threshold, we established which allergens in the BSCA facial series had positive patch test rates < 0·3% and > 0·3%. Allergens not in the BSCA facial series that had a positive patch test rate > 0·3% were identified.

RESULTS

Overall, 4224 patients were patch tested to the facial series. The number of allergens included in individual centres' facial series ranged from 24 to 66, with a total of 103 allergens tested across all centres. Twelve of the 26 allergens in the BSCA facial series had a positive patch test rate < 0·3% and 14 had a rate > 0·3%. Twenty-five allergens not recommended in the BSCA facial series had a positive patch test rate > 0·3%.

CONCLUSIONS

This audit has highlighted the significant variation in practice that exists among patch test centres, despite a recommended facial series. The BSCA facial series has been updated and now contains 24 allergens. Fifteen allergens remain, 11 allergens have been dropped and nine new allergens have been added.

Potential allergenicity of commonly sold high SPF broad spectrum sunscreens in the United States; from the perspective of patients with autoimmune skin disease

Background

Lack of established criteria for sunscreen product recommendations and potentially allergenic ingredients in sunscreens pose an issue for physicians and patients with autoimmune skin conditions.

Objective

We reviewed popular sunscreens for effectiveness and potential allergenicity for recommendation and use in the autoimmune skin condition population.

Methods

In this cohort study, we selected sunscreens from the bestseller lists of Amazon, Target, and CVS. Of those, sunscreens with sun protection factor of 50 to 99 and 100 that met our effectiveness criteria (52 sunscreens) were analyzed for allergenic ingredients. An allergen list was developed from the North American Contact Dermatitis Group core data and stratified into low-prevalence and high-prevalence allergens.

Results

The allergenicity of popular sunscreens that met our effectiveness criteria are organized in a table by number of tiered potential allergens. Although no sunscreen was allergen-free, several products contained a minimal number of low-prevalence allergens. The most common low-prevalence allergens were chemical sunscreen ingredients avobenzone, octocrylene, and oxybenzone, and the most common high-prevalence allergen was fragrance. A limitation is that not all U.S. sunscreens were analyzed.

Conclusion

With the wide range of sunscreens available, physicians and patients should be aware of the effectiveness and potential allergenicity of sunscreens and make recommendations and consumption choices accordingly.

Benzophenone: a ubiquitous scaffold in medicinal chemistry

The benzophenone scaffold represents a ubiquitous structure in medicinal chemistry because it is found in several naturally occurring molecules which exhibit a variety of biological activities, such as anticancer, anti-inflammatory, antimicrobial, and antiviral. In addition, various synthetic benzophenone motifs are present in marketed drugs. They also represent important ingredients in perfumes and can act as photoinitiators. This review will provide an overview of benzophenone moieties with medicinal aspects synthesized in the last 15 years and will cover the most potent molecule in each report. In this review, only benzophenones with substitutions on their aryl rings, i.e. diphenyl ketone analogues, have been covered.

Dermatological and environmental toxicological impact of the sunscreen ingredient oxybenzone/benzophenone-3

Oxybenzone (Benzophenone-3) is an emerging human and environmental contaminant used in sunscreens and personal care products to help minimize the damaging effects of ultraviolet radiation. The Center for Disease Control fourth national report on human exposure to environmental chemicals demonstrated that approximately 97% of the people tested have oxybenzone present in their urine, and independent scientists have reported various concentrations in waterways and fish worldwide. Oxybenzone can also react with chlorine, producing hazardous by-products that can concentrate in swimming pools and wastewater treatment plants. Moreover, adverse reactions could very well be increased by the closed loop of ingesting fish contaminated with oxybenzone and/or washing the ingredient off our bodies and having it return in drinking water as treatment plants do not effectively remove the chemical as part of their processing protocols. In humans, oxybenzone has been reported to produce contact and photocontact allergy reactions, implemented as a possible endocrine disruptor and has been linked to Hirschsprung's disease. Environmentally, oxybenzone has been shown to produce a variety of toxic reactions in coral and fish ranging from reef bleaching to mortality. Lastly, with the rise in skin cancer rates and the availability of more effective sunscreen actives such as micronized zinc oxide and titanium dioxide, serious doubts about the relative prevention benefit of personal care products containing oxybenzone must be raised and compared with the potential negative health and environmental effects caused by the accumulation of this and other chemicals in the ecosystem.

Current challenges in photoprotection

Electromagnetic radiation in the ultraviolet, visible, and infrared ranges all produce biologic effects. Ultraviolet filters are the most well-studied photoprotective measure for the adverse effects of ultraviolet radiation. Because of the reported endocrinologic effects of oxybenzone in animal studies, its effects on coral reefs, and its photocontact allergy potential, its use has been minimized in many countries worldwide. New developments in topical antioxidants and oral and subcutaneous agents (eg, Polypodium leucotomos extract, afamelanotide, nicotinamide) with photoprotective and antiphotocarcinogenic properties could potentially provide addition modalities for protection against the effects of visible light and infrared radiation.

Urinary benzophenone concentrations and their association with demographic factors in a South Korean population

Benzophenone (BP) and its derivatives are widely used in various cosmetics, personal care products, and food packaging ink. The use of BP has raised concerns about the potential health risks associated with its endocrine-disrupting effects. This study evaluated urinary concentrations of BP derivatives in a national sample of the South Koreans population aged 6-89 years. From July to September in each 2010 and 2011, 1576 urine samples were collected. Urinary concentrations of benzophenone-1 (BP-1), benzophenone-2 (BP-2), benzophenone-3 (BP-3), benzophenone-4 (BP-4), benzophenone-8 (BP-8), and 4-hydroxybenzophenone (4-OH-BP) were analyzed using liquid chromatography-mass spectrometry. The detection rate for BP-1 and 4-OH-BP were 56% [limit of detection (LOD) 0.59ng/mL] and 88% (LOD 0.04ng/mL), respectively, whereas those for BP-2, BP-3, BP-4, and BP-8 were all below 25%. The geometric means of urinary BP-1 and 4-OH-BP concentrations were 1.24ng/mL and 0.45ng/mL, respectively. Multiple linear regression analysis indicated that concentrations of BP-1 in and of 4-OH-BP in adults were associated with sex and age. The BP-1 and 4-OH-BP concentration of children and adolescents was associated with sex, age, income, and current area of residence. The correlation was observed between urinary concentrations of BP derivatives, which is an important indication of exposure biomarkers and the metabolic pathways from BP-3. This is the first national study to evaluate the presence of BP derivatives in urine samples from the South Korean population, stratified by demographic factors.