Influence of Protein Deposition on Bacterial Adhesion to Contact Lenses

POSS and PEG Contained Copolymer for Antibioadhesive Rigid Contact Lenses Materials Application

Myopia is a global public health issue. Rigid contact lenses (RCLs) are an effective way to correct or control myopia. However, bioadhesion issues remain one of the significant obstacles limiting its clinical application. Although enhancing hydrophilicity through various surface treatments can mitigate this problem, the duration of effectiveness is short-lived and the processing involved is complex and costly. Herein, an antiadhesive RCLs material was designed via 8-armed methacrylate-POSS (8MA-POSS), and poly(ethylene glycol) methacrylate (PEGMA) copolymerization with 3-[tris(trimethylsiloxy)silyl] propyl methacrylate (TRIS). The POSS and PEG segments incorporated P(TRIS-co-PEGMA-co-8MA-POSS) (PTPM) material was obtained and their optical transparency, refractive index, resolution, hardness, surface charge, thermal features, and wettability were tested and optimized. The antibioadhesion activities, including protein, lipid, and bacteria, were evaluated as well. In vitro and in vivo results indicated that the optimized antibioadhesive PTPM materials present good biocompatibility and biosafety. Thus, such POSS and PEG segments containing material were a potential antibioadhesive RCL material option.

Impact of the physical properties of contact lens materials on the discomfort: role of the coefficient of friction

Contact Lens Discomfort (CLD) is the main cause in contact lens (CLs) discontinuation, referred in literature as drop-out phenomenon. Despite such evidence was reported in several clinical studies, a relationship between physico-chemical properties of CLs and CLD is not still totally understood. In this regard, the friction of CLs surfaces seems to be related to discomfort feeling events, probably due to an alteration of the lubricate function of the tear film after the CL placement inside the ocular environment. In the last years, many studies have been finalized to the friction measurements of CLs surface, finding conflicting data due to a lack in standardized protocol. The aim of this review is primarily to show evident relationships between CLs surface properties (i.e. wettability, tear evaporation, tear film quality, etc.) and the coefficient of friction (CoF), resulting therefore the most relevant physical quantity in the CLs characterization. In addition, we reported the most recent studies in CLs tribology, which highlight that the introduction of a standard protocol in CoF measurements is necessary to obtain reproducible results, considering the aim to evaluate in a more precise way the relationship between this material surface property and comfort in CLs users.

Lysozyme-immobilized bandage contact lens inhibits the growth and biofilm formation of common eye pathogens in vitro

Bandage contact lenses have an increased affinity to accumulate tear film proteins and bacteria during wear. Among the wide variety of tear film proteins, lysozyme has attracted the most attention for several reasons, including the fact that it is found at a high concentration in the tear film, has exceptional antibacterial and antibiofilm properties, and its significant deposits onto contact lenses. This study aims to evaluate the effect of lysozyme on bacterial biofilm formation on bandage contact lenses. For this purpose, several methods, including microtiter plate test and Colony Forming Unit (CFU) assay have been used to determine antibacterial and antibiofilm characteristics of lysozyme against the two most frequent contact lens-induced bacterial ocular infections, Staphylococcus aureus, and Pseudomonas aeruginosa. The results of these assays demonstrate lysozyme potential to inhibit 57.9% and 80.7% of the growth of S. aureus and P. aeruginosa, respectively. In addition, biofilm formations of P. aeruginosa and S. aureus reduced by 38.3% and 62.7%, respectively due to the antibiofilm effect of lysozyme. SEM and AFM imaging were utilized to visualize lysozyme antibacterial activity and topography changes of the contact lens surface, respectively, in the presence/absence of lysozyme. The results indicated that lysozyme can efficiently attack both gram-positive and gram-negative bacteria and consequently lysozyme-functionalized bandage contact lenses can reduce the risk of ocular infection after eye surgery.

Comparative Evaluation of Pseudomonas aeruginosa Adhesion to a Poly-(2-Methacryloyloxyethyl Phosphorylcholine)-Modified Silicone Hydrogel Contact Lens

Pseudomonas aeruginosa is the most common causative agent associated with microbial keratitis. During contact lens wear, pathogens may be introduced into the ocular environment, which might cause adverse events. Lehfilcon A is a recently developed contact lens with a water gradient surface composed of polymeric 2-methacryloyloxyethyl phosphorylcholine (MPC). MPC is re-ported to impart anti-biofouling properties onto modified substrates. Therefore, in this in vitro experimental study, we tested the capability of lehfilcon A to resist adhesion by P. aeruginosa. Quantitative bacterial adhesion assays using five strains of P. aeruginosa were conducted to compare the adherence properties of lehfilcon A to five currently marketed silicone hydrogel (SiHy) contact lenses (comfilcon A, fanfilcon A, senofilcon A, senofilcon C, and samfilcon A). Compared to lehfilcon A, we observed 26.7 ± 8.8 times (p = 0.0028) more P. aeruginosa binding to comfilcon A, 30.0 ± 10.8 times (p = 0.0038) more binding to fanfilcon A, 18.2 ± 6.2 times (p = 0.0034) more binding to senofilcon A, 13.6 ± 3.9 times (p = 0.0019) more binding to senofilcon C, and 29.5 ± 11.8 times (p = 0.0057) more binding to samfilcon A. These results demonstrate that, for various strains of P. aeruginosa, lehfilcon A reduces bacterial adhesion compared to other contact lens materials.

Effect of Deposition and Protease Digestion on the Ex Vivo Activity of Antimicrobial Peptide-Coated Contact Lenses

A clinical study of antimicrobial contact lenses containing the cationic peptide Mel4 was conducted. The few adverse events that occurred with this lens occurred on or after 13 nights of wear. The current study examined whether the Mel4 contact lenses lost activity during wear and the mechanism of this loss. Participants wore contact lenses for up to 13 nights. Lenses were tested for their ability to reduce the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus. The amount of protein and lipid extracted from lenses was measured. The ability of trypsin to affect the antimicrobial activity of Mel4-coated contact lenses was measured. Mel4-coated contact lenses lost their antimicrobial activity at six nights of wear for both bacteria. The amount of lipids (13 ± 11 vs. 21 ± 14 μg/lens at 13 nights wear) and proteins (8 ± 4 vs. 10 ± 3 mg/lens at 13 nights of wear) extracted from lenses was not different between Mel4-coated and uncoated lenses, and was not different after three nights when antimicrobial activity was maintained and thirteen nights when they had lost activity (lipid: 25 ± 17 vs. 13 ± 11, p = 0.2; protein: 8 ± 1 vs. 8 ± 4 mg/lens, p = 0.4). Trypsin digestion eliminated the antimicrobial activity of Mel4-coated lenses. In summary, Mel4-coated contact lenses lost antibacterial activity at six nights of wear, and the most likely reason was proteolytic digestion of the peptide. Future studies will design and test proteolytically stable peptide mimics as coatings for contact lenses.

Glycoprotein 340's scavenger receptor cysteine-rich domain promotes adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to contact lens polymers

Contact lenses are biomaterials worn on the eye to correct refractive errors. Bacterial adhesion and colonization of these lenses results in adverse events such as microbial keratitis. The adsorption of tear proteins to contact lens materials enhances bacterial adhesion. Glycoprotein 340 (Gp340), a tear component, is known to promote microbial colonization in the oral cavity, however, it has not been investigated in any contact lens-related adverse event. Therefore, this study examined the adsorption of Gp340 and its recombinantly expressed scavenger receptor cysteine rich (iSRCR₁^Gp340) domain on two common contact lens materials, etafilcon A and lotrafilcon B, and the concomitant effects on the adherence of clinical isolates of microbial keratitis causative agents, Pseudomonas aeruginosa (PA6206, PA6294), and Staphylococcus aureus (SA38, USA300). Across all strains and materials, iSRCR₁^Gp340 enhanced adherence of bacteria in a dose-dependent manner. However, _iSRCR₁^Gp340 did not modulate lysozyme's and lactoferrin's effects on bacterial adhesion to the contact lens. The Gp340 binding surface protein SraP significantly enhanced USA300 binding to iSRCR₁^Gp340-coated lenses. In addition, iSRCR₁^Gp340-coated surfaces had significantly diminished biofilms with the SraP mutant (ΔSraP), and with the Sortase A mutant (ΔSrtA), there was a further reduction in biofilms, indicating the likely involvement of additional surface proteins. Finally, the binding affinities between iSRCR₁^Gp340 and SraP were determined using surface plasmon resonance (SPR), where the complete SraP binding region displayed nanomolar affinity, whereas its smaller fragments adhered with micromolar affinities. This study concludes that Gp340 and its SRCR domains play an important role in bacterial adhesion to the contact lens.

The Impact of Incubation Conditions on In Vitro Phosphatidylcholine Deposition on Contact Lens Materials

SIGNIFICANCE

Previous in vitro measurements of contact lenses commonly investigate the impact of nonpolar tear film lipids (i.e., sterols). Polar lipids, however, are equally important stabilizing components of the tear film. This research explores and presents further knowledge about various aspects of polar lipid uptake that may impact contact lens performance.

PURPOSE

This study evaluated the impact of incubation time, lipid concentration, and replenishment of an artificial tear solution (ATS) on the uptake of phosphatidylcholine (PC) onto conventional hydrogel (CH) and silicone hydrogel (SH) contact lens materials.

METHODS

Four SHs and two CH lens materials (n = 4) were soaked in a complex ATS containing radioactive 14C-PC as a probe molecule. Phosphatidylcholine uptake was monitored at various incubation time points (1, 3, 7, 14, and 28 days), with different ATS lipid concentrations (0.5×, 1×, 2×) and with and without regular replenishment of the ATS. Phosphatidylcholine was extracted from the lenses, processed, and counted by a β counter, and accumulated PC (μg/lens) was extrapolated from standard lipid calibration curves.

RESULTS

All materials exhibited increasing PC deposition over time. Conventional hydrogel materials showed significantly lower PC uptake rates (P < .001) than any of the SH materials. Increasing lipid concentration in the ATS resulted in increased PC binding onto the contact lens materials (P < .001). Replenishing the ATS every other day, however, impacted the PC deposition differently, showing increased binding (P < .001) on CHs and reduced PC deposition for SH materials (P < .001).

CONCLUSIONS

Length of incubation, lipid concentration in the ATS, and renewal of the incubation solution all influenced the amount of PC that sorbed onto various lens materials and therefore need to be considered when conducting future in vitro deposition studies.

Slippery liquid-infused porous surfaces with inclined microstructures to enhance durable anti-biofouling performances

In the development of biocompatible materials for biomedical applications, infections and their resulting inflammation responses are important issues caused typically by the adhesion of micro-organisms on medical devices. Recently slippery liquid-infused porous surfaces (SLIPS) has provided a new strategy for anti-biofouling and low-adhesion surfaces, however, there are still some bottlenecks in practical uses, particularly the loss of lubricant significantly restricts the durability and stability of SLIPS. In this paper, we micro-fabricated well-controlled micro-cavities with different profiles (vertical or inclined walls) to investigate the long-term anti-biofouling effect of SLIPS. We explored microstructure geometries in two aspects: the aspect ratio and the slope angle relevant with the Laplace pressure and the oil contact area which lead to different oil-locking abilities. High aspect ratio and inclined slope were demonstrated with better oil-locking ability as well as significantly increased anti-fouling performances. Under the same experimental setup, the Escherichia coli and Staphylococcus aureus bacteria coverage on SLIPS with 80 μm-depth 20° inclined micro-cavities was only ∼30 % of that with vertical micro-cavities, while increasing aspect ratio by 4 times induced ∼3 times enhanced anti-fouling effect. On basis of these findings, we propose the enhanced SLIPS with inclined microstructures to achieve better oil-locking ability and long-term anti-biofouling performance, which may broaden many practical applications of SLIPS.

The COVID-19 pandemic: Important considerations for contact lens practitioners

A novel coronavirus (CoV), the Severe Acute Respiratory Syndrome Coronavirus - 2 (SARS-CoV-2), results in the coronavirus disease 2019 (COVID-19). As information concerning the COVID-19 disease continues to evolve, patients look to their eye care practitioners for accurate eye health guidance. There is currently no evidence to suggest an increased risk of contracting COVID-19 through contact lens (CL) wear compared to spectacle lens wear and no scientific evidence that wearing standard prescription spectacles provides protection against COVID-19 or other viral transmissions. During the pandemic there will potentially be significant changes in access to local eyecare. Thus, it is imperative CL wearers are reminded of the steps they should follow to minimise their risk of complications, to reduce their need to leave isolation and seek care. Management of adverse events should be retained within optometric systems if possible, to minimise the impact on the wider healthcare service, which will be stretched. Optimal CL care behaviours should be the same as those under normal circumstances, which include appropriate hand washing (thoroughly with soap and water) and drying (with paper towels) before both CL application and removal. Daily CL cleaning and correct case care for reusable CL should be followed according to appropriate guidelines, and CL exposure to water must be avoided. Where the availability of local clinical care is restricted, practitioners could consider advising patients to reduce or eliminate sleeping in their CL (where patients have the appropriate knowledge about correct daily care and access to suitable lens-care products) or consider the option of moving patients to daily disposable lenses (where patients have appropriate lens supplies available). Patients should also avoid touching their face, including their eyes, nose and mouth, with unwashed hands and avoid CL wear altogether if unwell (particularly with any cold or flu-like symptoms).

Thirty years of 'quiet eye' with etafilcon A contact lenses

Frequent replacement contact lenses made from the etafilcon A hydrogel lens material were introduced onto the market over 30 years ago, and etafilcon A remains the most widely used hydrogel lens material today. Although the prescribing of silicone hydrogel lenses is increasing, millions of lens wearers globally have been wearing hydrogel lenses for many years and exhibit a physiologically-stable 'quiet eye', with a low profile of adverse events. Hydrogel lenses are demonstrated to maintain a low inflammatory response and infection risk profile during daily wear, which in the case of etafilcon A, may be related to its low modulus, and the naturally-protective, anti-microbial, non-denatured lysozyme absorbed into the lens from the tear fluid. Although improved corneal physiology from decreased hypoxia with silicone hydrogel lenses is well accepted, equivalent levels of corneal oxygenation are maintained during daily wear of low to medium powered hydrogel lenses, which do not impede the daily corneal de-swelling process, and do not induce clinically significant changes in ocular health. Therefore, hydrogel lenses remain an important alternative for daily wear in modern contact lens practice.

Label-Free Quantitative Proteomics Distinguishes General and Site-Specific Host Responses to Pseudomonas aeruginosa Infection at the Ocular Surface

Mass spectrometry-based proteomics enables the unbiased and sensitive profiling of cellular proteomes and extracellular environments. Recent technological and bioinformatic advances permit identifying dual biological systems in a single experiment, supporting investigation of infection from both the host and pathogen perspectives. At the ocular surface, Pseudomonas aeruginosa is commonly associated with biofilm formation and inflammation of the ocular tissues, causing damage to the eye. The interaction between P. aeruginosa and the immune system at the site of infection describes limitations in clearance of infection and enhanced pathogenesis. Here, the extracellular environment (eye wash) of murine ocular surfaces infected with a clinical isolate of P. aeruginosa is profiled and neutrophil marker proteins are detected, indicating neutrophil recruitment to the site of infection. The first potential diagnostic markers of P. aeruginosa-associated keratitis are also identified. In addition, the deepest murine corneal proteome to date is defined and proteins, categories, and networks critical to the host response are detected. Moreover, the first identification of bacterial proteins attached to the ocular surface is reported. The findings are validated through in silico comparisons and enzymatic profiling. Overall, the work provides comprehensive profiling of the host-pathogen interface and uncovers differences between general and site-specific host responses to infection.

Adhesion of Pseudomonas aeruginosa, Achromobacter xylosoxidans, Delftia acidovorans, Stenotrophomonas maltophilia to contact lenses under the influence of an artificial tear solution

Corneal infection is a devastating sight-threatening complication that is associated with contact lens (CL) wear, commonly caused by Pseudomonas aeruginosa. Lately, Achromobacter xylosoxidans, Delftia acidovorans, and Stenotrophomonas maltophilia have been associated with corneal infection. This study investigated the adhesion of these emerging pathogens to CLs, under the influence of an artificial tear solution (ATS) containing a variety of components commonly found in human tears. Two different CL materials, etafilcon A and senofilcon A, either soaked in an ATS or phosphate buffered saline, were exposed to the bacteria. Bacterial adhesion was investigated using a radio-labeling technique (total counts) and plate count method (viable counts). The findings from this study revealed that in addition to P. aeruginosa, among the emerging pathogens evaluated, A. xylosoxidans showed an increased propensity for adherence to both CL materials and S. maltophilia showed lower viability. ATS influenced the viable counts more than the total counts on CLs.

The Development of an Antimicrobial Contact Lens - From the Laboratory to the Clinic

Contact lens wear is generally safe and provides excellent vision. However, contact lens wear is often associated with the risk of developing ocular surface infection and inflammation, and in severe cases, the infection can result in loss of vision. Antimicrobial peptide-coated contact lenses have been made to help reduce the incidence of infection and inflammation. This paper reviews the research progress from conception, through the laboratory and preclinical tests to the latest information on clinical testing of an antimicrobial contact lens. We provide insights into the pathways followed and pitfalls that have been encountered. The journey has not always been linear or smooth, but has resulted in some of the first published clinical testing of antimicrobial peptide-coated contact lenses in humans. We hope this may help lead to the development and commercialisation of antimicrobial contact lenses in the future.

Tear film, contact lenses and tear biomarkers

This article summarises research undertaken since 1993 in the Willcox laboratory at the University of New South Wales, Sydney on the tear film, its interactions with contact lenses, and the use of tears as a source of biomarkers for ocular and non-ocular diseases. The proteome, lipidome and glycome of tears all contribute to important aspects of the tear film, including its structure, its ability to defend the ocular surface against microbes and to help heal ocular surface injuries. The tear film interacts with contact lenses in vivo and interactions between tears and lenses can affect the biocompatibility of lenses, and may be important in mediating discomfort responses during lens wear. Suggestions are made for follow-up research.

Efficacy of Contact Lens Care Solutions in Removing Cholesterol Deposits From Silicone Hydrogel Contact Lenses

PURPOSE

To determine the efficacy of multipurpose solutions (MPSs) on the removal of cholesterol deposits from silicone hydrogel (SH) contact lens materials using an in vitro model.

MATERIALS AND METHODS

Five SH lens materials: senofilcon A, comfilcon A, balafilcon A, lotrafilcon A, and lotrafilcon B were removed from the blister pack (n=4 for each lens type), incubated for 7 days at 37°C in an artificial tear solution containing C radiolabeled cholesterol. Thereafter, lenses were stored in a preserved saline solution control (Sensitive Eyes Saline Plus) or cleaned with 1 of the 5 MPSs incorporating different preservatives (POLYQUAD/ALDOX, polyquaternium-1/alexidine, polyquaternium-1/PHMB, and 2 based on PHMB alone) using a rub and rinse technique, according to the manufacturer's recommendations, and stored in the MPS for a minimum of 6 hr. Lenses were then extracted with 2:1 chloroform:methanol, analyzed in a beta counter, and μg/lens of cholesterol was determined.

RESULTS

Balafilcon A and senofilcon A lens materials showed the highest amounts of accumulated cholesterol (0.93±0.02 μg/lens; 0.95±0.01 μg/lens, respectively), whereas lotrafilcon A and lotrafilcon B deposited the lowest amounts (0.37±0.03 μg/lens; 0.47±0.12 μg/lens, respectively). For all lens materials, the MPS preserved with POLYQUAD/ALDOX removed more deposited cholesterol than any other test solution; however, the amount of removed cholesterol contamination from the individual contact lenses was only statistically significant for balafilcon A and senofilcon A (P=0.006 and P=0.042, respectively). Sensitive eyes and the other evaluated MPSs showed no significant effect on cholesterol removal (P>0.05).

CONCLUSION

Cholesterol-removal efficacy varies depending on the combination of lens material and solution. Only 1 MPS showed a statistically significant reduction of cholesterol deposit for only 2 of the 5 tested lens materials.

In Vitro Effect of Lysozyme on Albumin Deposition to Hydrogel Contact Lens Materials

SIGNIFICANCE

Albumin deposition on contact lenses could be detrimental to contact lens (CL) wear because this may increase the risk of bacterial binding and reduce comfort. Lysozyme deposition on selected lens materials would reduce albumin deposition on lenses.

PURPOSE

This study aims to determine if lysozyme deposition on CLs could act as a barrier against subsequent albumin adsorption, using an in vitro model.

METHODS

Six hydrogel CL materials (etafilcon A, polymacon, nelfilcon A, omafilcon A, ocufilcon B, and nesofilcon A) were evaluated. Four CLs of each type were soaked in lysozyme solution for 16 hours at 37°C. Lysozyme-coated lenses were then placed in vials with 1.5 mL of artificial tear solution containing I-labeled albumin for 16 hours at 37°C with shaking. Four uncoated lenses of each type were used as controls. Lenses soaked in radiolabeled albumin were rinsed in a phosphate-buffered saline solution, and radioactive counts were measured directly on lenses using a gamma counter. Albumin uptake on lenses was measured using a calibration curve by plotting radioactive counts versus protein concentration.

RESULTS

Results are reported as mean ± SD. Lysozyme-coated etafilcon A lenses exhibited lower levels of deposited albumin than uncoated etafilcon A lenses (58 ± 12 vs. 84 ± 5 ng/lens; P < .05). There were no differences in albumin adsorption between control (uncoated) and lysozyme-coated polymacon (105 ± 10 vs. 110 ± 34 ng/lens), nelfilcon A (51 ± 7 vs. 42 ± 20 ng/lens), omafilcon A (90 ± 20 vs. 80 ± 38 ng/lens), ocufilcon B (87 ± 20 vs. 115 ± 50 ng/lens), and nesofilcon A (170 ± 29 vs. 161 ± 10 ng/lens) lens materials (P > .05). Uncoated nesofilcon A lenses deposited the highest amount of albumin when compared with other uncoated lenses (P < .05).

CONCLUSIONS

This study demonstrates that lysozyme deposited onto etafilcon A resists the deposition of albumin, which may potentially be beneficial to CL wearers.

Disturbing the balance: effect of contact lens use on the ocular proteome and microbiome

Contact lens wear is a popular, convenient and effective method for vision correction. In recent years, contact lens practice has expanded to include new paradigms, including orthokeratology; however, their use is not entirely without risk, as the incidence of infection has consistently been reported to be higher in contact lens wearers. The explanations for this increased susceptibility have largely focused on physical damage, especially to the cornea, due to a combination of hypoxia, mechanical trauma, deposits and solution cytotoxicity, as well as poor compliance with care routines leading to introduction of pathogens into the ocular environment. However, in recent years, with the increasing availability and reduced cost of molecular techniques, the ocular environment has received greater attention with in-depth studies of proteins and other components. Numerous proteins were found to be present in the tears and their functions and interactions indicate that the tears are far more complex than formerly presumed. In addition, the concept of a sterile or limited microbial population on the ocular surface has been challenged by analysis of the microbiome. Ocular microbiome was not considered as one of the key sites for the Human Microbiome Project, as it was thought to be limited compared to other body sites. This was proven to be fallacious, as a wide variety of micro-organisms were identified in the analyses of human tears. Thus, the ocular environment is now recognised to be more complicated and interference with this ecological balance may lead to adverse effects. The use of contact lenses clearly changes the situation at the ocular surface, which may result in consequences which disturb the balance in the healthy eye.

A Review of Techniques to Measure Protein Sorption to Soft Contact Lenses

PURPOSE

To compare and critically evaluate a variety of techniques to measure the quantity and biological activity of protein sorption to contact lenses over short time periods.

METHODS

A literature review was undertaken investigating the major techniques to measure protein sorption to soft contact lens materials, with specific reference to measuring protein directly on lenses using in situ, ex situ, protein structural, and biological activity techniques.

RESULTS

The use of in situ techniques to measure protein quantity provides excellent sensitivity, but many are not directly applicable to contact lenses. Many ex situ techniques struggle to measure all sorbed proteins, and these measurements can have significant signal interference from the lens materials themselves. Techniques measuring the secondary and tertiary structures of sorbed proteins have exhibited only limited success.

CONCLUSIONS

There are a wide variety of techniques to measure both the amount of protein and the biological activity of protein sorbed to soft contact lens materials. To measure the mass of protein sorbed to soft contact lenses (not just thin films) over short time periods, the method of choice should be I radiolabeling. This technique is sensitive enough to measure small amounts of deposited protein, provided steps are taken to limit and measure any interaction of the iodine tracer with the materials. To measure the protein activity over short time periods, the method of choice should be to measure the biological function of sorbed proteins. This may require new methods or adaptations of existing ones.

Effects of lactoferrin on the viability and the encystment of Acanthamoeba trophozoites

Lactoferrin (LF) is an iron-binding basic glycoprotein that has an antimicrobial effect against certain microbes. The purpose of this study is to evaluate the amoebicidal effect of bovine milk LF (bLF) against Acanthamoeba clinical-isolate trophozoites, which cause severe keratitis. Most of the risk factor for Acanthamoeba keratitis is from wearing soft contact lenses (SCLs). Acanthamoeba trophozoites were incubated in bovine LF (bLF) solution, and the ratios of viability and encystment were determined with microscopic analysis of cyst formation. The amoebicidal effect of bLF was assessed by Trypan blue assay. The ratios of viable cells in the presence of iron-free bLF (apo-bLF), native-bLF, and iron-saturated bLF (Fe-bLF) at the concentration of 10 μmol/L for 60 min were 7.7% ± 4.6%, 80.7% ± 10.1%, and 97.3% ± 1.5%, respectively. Apo-bLF showed potent amoebicidal effect against Acanthamoeba trophozoites, but Fe-bLF did not have this effect. After treating with apo-bLF, most dead cells were nonglobular forms of trophozoites but not cystic forms. Encystment of Acanthamoeba was assessed by the sarkosyl-calcofluor white assay. The encystment ratios treated with 0.5% propylene glycol (positive control) and 10 μmol/L apo-bLF for 24 h were 96.12% ± 10.6% and 0.47% ± 0.5%, respectively. These results suggest that the amoebicidal effect of apo-bLF without encystment might lead to the prevention of contamination of Acanthamoeba in SCL stock cases.

Antimicrobial activity of immobilized lactoferrin and lactoferricin

Lactoferrin and lactoferricin were immobilized on glass surfaces via two linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA). The resulting surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. The antimicrobial activity of the surfaces was determined using Pseudomonas aeruginosa and Staphylococcus aureus strains by fluorescence microscopy. Lactoferrin and lactoferricin immobilization was confirmed by XPS showing significant increases (p < 0.05) in nitrogen on the glass surface. The immobilization of both proteins slightly increased the overall hydrophobicity of the glass. Both lactoferrin and lactoferricin immobilized on glass significantly (p < 0.05) reduced the numbers of viable bacterial cells adherent to the glass. For P. aeruginosa, the immobilized proteins consistently increased the percentage of dead cells compared to the total cells adherent to the glass surfaces (p < 0.03). Lactoferrin and lactoferricin were successfully immobilized on glass surfaces and showed promising antimicrobial activity against pathogenic bacteria. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2612-2617, 2017.

Nanoscale Plasma Coating Inhibits Formation of Staphylococcus aureus Biofilm

Staphylococcus aureus commonly infects medical implants or devices, with devastating consequences for the patient. The infection begins with bacterial attachment to the device, followed by bacterial multiplication over the surface of the device, generating an adherent sheet of bacteria known as a biofilm. Biofilms resist antimicrobial therapy and promote persistent infection, making management difficult to futile. Infections might be prevented by engineering the surface of the device to discourage bacterial attachment and multiplication; however, progress in this area has been limited. We have developed a novel nanoscale plasma coating technology to inhibit the formation of Staphylococcus aureus biofilms. We used monomeric trimethylsilane (TMS) and oxygen to coat the surfaces of silicone rubber, a material often used in the fabrication of implantable medical devices. By quantitative and qualitative analysis, the TMS/O2 coating significantly decreased the in vitro formation of S. aureus biofilms; it also significantly decreased in vivo biofilm formation in a mouse model of foreign-body infection. Further analysis demonstrated TMS/O2 coating significantly changed the protein adsorption, which could lead to reduced bacterial adhesion and biofilm formation. These results suggest that TMS/O2 coating can be used to effectively prevent medical implant-related infections.

Biological and Clinical Implications of Lysozyme Deposition on Soft Contact Lenses

Within a few minutes of wear, contact lenses become rapidly coated with a variety of tear film components, including proteins, lipids, and mucins. Tears have a rich and complex composition, allowing a wide range of interactions and competitive processes, with the first event observed at the interface between a contact lens and tear fluid being protein adsorption. Protein adsorption on hydrogel contact lenses is a complex process involving a variety of factors relating to both the protein in question and the lens material. Among tear proteins, lysozyme is a major protein that has both antibacterial and anti-inflammatory functions. Contact lens materials that have high ionicity and high water content have an increased affinity to accumulate lysozyme during wear, when compared with other soft lens materials, notably silicone hydrogel lenses. This review provides an overview of tear film proteins, with a specific focus on lysozyme, and examines various factors that influence protein deposition on contact lenses. In addition, the impact of lysozyme deposition on various ocular physiological responses and bacterial adhesion to lenses and the interaction of lysozyme with other tear proteins are reviewed. This comprehensive review suggests that deposition of lysozyme on contact lens materials may provide a number of beneficial effects during contact lens wear.

Kinetics of Competitive Adsorption between Lysozyme and Lactoferrin on Silicone Hydrogel Contact Lenses and the Effect on Lysozyme Activity

PURPOSE

To determine the effect of competitive adsorption between lysozyme and lactoferrin on silicone hydrogel contact lenses and the effect on lysozyme activity.

METHODS

Three commercially available silicone hydrogel contact lens materials (senofilcon A, lotrafilcon B and balafilcon A) were examined, for time points ranging from 10 s to 2 h. Total protein deposition was determined by I(125) radiolabeling of lysozyme and lactoferrin, while the activity of lysozyme was determined by a micrococcal activity assay.

RESULTS

Senofilcon A and balafilcon A did not show any relevant competitive adsorption between lysozyme and lactoferrin. Lotrafilcon B showed reduced protein deposition due to competitive adsorption for lactoferrin at all time points and lysozyme after 7.5 min. Co-adsorption of lactoferrin and lysozyme decreased the activity of lysozyme in solution for senofilcon A and lotrafilcon B, but co-adsorption had no effect on the surface activity of lysozyme for all lens types investigated.

CONCLUSIONS

Competition between lysozyme and lactoferrin is material specific. Co-adsorption of lysozyme and lactoferrin does not affect the activity of surface-bound lysozyme but can reduce the activity of subsequently desorbed lysozyme.

Corneal cell adhesion to contact lens hydrogel materials enhanced via tear film protein deposition

Tear film protein deposition on contact lens hydrogels has been well characterized from the perspective of bacterial adhesion and viability. However, the effect of protein deposition on lens interactions with the corneal epithelium remains largely unexplored. The current study employs a live cell rheometer to quantify human corneal epithelial cell adhesion to soft contact lenses fouled with the tear film protein lysozyme. PureVision balafilcon A and AirOptix lotrafilcon B lenses were soaked for five days in either phosphate buffered saline (PBS), borate buffered saline (BBS), or Sensitive Eyes Plus Saline Solution (Sensitive Eyes), either pure or in the presence of lysozyme. Treated contact lenses were then contacted to a live monolayer of corneal epithelial cells for two hours, after which the contact lens was sheared laterally. The apparent cell monolayer relaxation modulus was then used to quantify the extent of cell adhesion to the contact lens surface. For both lens types, lysozyme increased corneal cell adhesion to the contact lens, with the apparent cell monolayer relaxation modulus increasing up to an order of magnitude in the presence of protein. The magnitude of this increase depended on the identity of the soaking solution: lenses soaked in borate-buffered solutions (BBS, Sensitive Eyes) exhibited a much greater increase in cell attachment upon protein addition than those soaked in PBS. Significantly, all measurements were conducted while subjecting the cells to moderate surface pressures and shear rates, similar to those experienced by corneal cells in vivo.

Microbial adherence to cosmetic contact lenses

AIM

To investigate whether cosmetic contact lenses (CCL) with surface pigments affect microbial adherence.

METHOD

Fifteen brands of CCL were purchased from optical, non-optical retail outlets, and via the Internet. A standardized rub-off test was performed on each CCL (five lenses per brand) to confirm the location of the pigments. The rub-off test comprised gentle rubbing on the surfaces of each CCL with wetted cotton buds for a maximum of 20 rubs per surface. A new set of CCL (five lenses per brand) were incubated in Pseudomonas aeruginosa overnight. Viable counts of adhered bacteria were determined by the number of colony-forming units (CFU) on agar media on each lens. The adherence of P. aeruginosa as well as Staphylococcus aureus and Serratia marcescens to three brands of CCL (A-C) (five lenses per brand) were also compared to their adherences on their clear counterparts.

RESULTS

Only two of the 15 brands of CCL tested (brands B and C) had pigments that did not detach with the rub-off test. The remaining 13 brands of CCL all failed the rub-off test and these lenses showed higher P. aeruginosa adherence (8.7 × 10(5)-1.9 × 10(6) CFU/lens). Brands B and C lenses showed at least six times less bacterial adhesion than the other 13 brands. Compared to their clear counterparts, bacterial adherence to brands B and C lenses did not differ significantly, whereas brand A lenses showed significantly higher adherence.

CONCLUSION

Surface pigments on CCL resulted in significantly higher bacterial adherence.

Antimicrobial compounds in tears

The tear film coats the cornea and conjunctiva and serves several important functions. It provides lubrication, prevents drying of the ocular surface epithelia, helps provide a smooth surface for refracting light, supplies oxygen and is an important component of the innate defense system of the eye providing protection against a range of potential pathogens. This review describes both classic antimicrobial compounds found in tears such as lysozyme and some more recently identified such as members of the cationic antimicrobial peptide family and surfactant protein-D as well as potential new candidate molecules that may contribute to antimicrobial protection. As is readily evident from the literature review herein, tears, like all mucosal fluids, contain a plethora of molecules with known antimicrobial effects. That all of these are active in vivo is debatable as many are present in low concentrations, may be influenced by other tear components such as the ionic environment, and antimicrobial action may be only one of several activities ascribed to the molecule. However, there are many studies showing synergistic/additive interactions between several of the tear antimicrobials and it is highly likely that cooperativity between molecules is the primary way tears are able to afford significant antimicrobial protection to the ocular surface in vivo. In addition to effects on pathogen growth and survival some tear components prevent epithelial cell invasion and promote the epithelial expression of innate defense molecules. Given the protective role of tears a number of scenarios can be envisaged that may affect the amount and/or activity of tear antimicrobials and hence compromise tear immunity. Two such situations, dry eye disease and contact lens wear, are discussed here.

A laboratory assessment of factors that affect bacterial adhesion to contact lenses

Adhesion of pathogenic microbes, particularly bacteria, to contact lenses is implicated in contact lens related microbial adverse events. Various in vitro conditions such as type of bacteria, the size of initial inoculum, contact lens material, nutritional content of media, and incubation period can influence bacterial adhesion to contact lenses and the current study investigated the effect of these conditions on bacterial adhesion to contact lenses. There was no significant difference in numbers of bacteria that adhered to hydrogel etafilcon A or silicone hydrogel senofilcon A contact lenses. Pseudomonas aeruginosa adhered in higher numbers compared to Staphylococcus aureus. Within a genera/species, adhesion of different bacterial strains did not differ appreciably. The size of initial inoculum, nutritional content of media, and incubation period played significant roles in bacterial adhesion to lenses. A set of in vitro assay conditions to help standardize adhesion between studies have been recommended.

Microbial adhesion to silicone hydrogel lenses: a review

PURPOSE

Microbial adhesion to contact lenses is believed to be one of the initiating events in the formation of many corneal infiltrative events, including microbial keratitis, that occur during contact lens wear. The advent of silicone hydrogel lenses has not reduced the incidence of these events. This may partly be related to the ability of microbes to adhere to these lenses. The aim of this study was to review the published literature on microbial adhesion to contact lenses, focusing on adhesion to silicone hydrogel lenses.

METHODS

The literature on microbial adhesion to contact lenses was searched, along with associated literature on adverse events that occur during contact lens wear. Particular reference was paid to the years 1995 through 2012 because this encompasses the time when the first clinical trials of silicone hydrogel lenses were reported, and their commercial availability and the publication of epidemiology studies on adverse events were studied.

RESULTS

In vitro studies of bacterial adhesion to unworn silicone hydrogel lens have shown that generally, bacteria adhere to these lenses in greater numbers than to the hydroxyethyl methacrylate-based soft lenses. Lens wear has different effects on microbial adhesion, and this is dependent on the type of lens and microbial species/genera that is studied. Biofilms that can be formed on any lens type tend to protect the bacteria and fungi from the effects on disinfectants. Fungal hyphae can penetrate the surface of most types of lenses. Acanthamoeba adhere in greater numbers to first-generation silicone hydrogel lenses compared with the second-generation or hydroxyethyl methacrylate-based soft lenses.

CONCLUSION

Microbial adhesion to silicone hydrogel lenses occurs and is associated with the production of corneal infiltrative events during lens wear.

Quantification of protein deposits on silicone hydrogel materials using stable-isotopic labeling and multiple reaction monitoring

This study was designed to use multiple reaction monitoring (MRM) for accurate quantification of contact lens protein deposits. Worn lenses used with a multipurpose disinfecting solution were collected after wear. Individual contact lenses were extracted and then digested with trypsin. MRM in conjunction with stable-isotope-labeled peptide standards was used for protein quantification. The results show that lysozyme was the major protein detected from both lens types. The amount of protein extracted from contact lenses was affected by the lens material. Except for keratin-1 (0.83 ± 0.61 vs 0.77 ± 0.20, p = 0.81) or proline rich protein-4 (0.11 ± 0.04 vs 0.15 ± 0.12, p = 0.97), the amounts of lysozyme, lactoferrin, or lipocalin-1 extracted from balafilcon A lenses (12.9 ± 9.01, 0.84 ± 0.50 or 2.06 ± 1.6, respectively) were significantly higher than that extracted from senofilcon A lenses (0.88 ± 0.13, 0.50 ± 0.10 or 0.27 ± 0.23, respectively) (p < 0.05). The amount of protein extracted from contact lenses was dependent on both the individual wearer and the contact lens material. This may have implications for the development of clinical responses during lens wear for different people and with different types of contact lenses. The use of MRM-MS is a powerful analytical tool for the quantification of specific proteins from single contact lenses after wear.