Evidence of a molecular boundary lubricant at snakeskin surfaces

Measuring calcium content in plants using NEXAFS spectroscopy

Calcium is important for the growth and development of plants. It serves crucial functions in cell wall and cell membrane structure and serves as a secondary messenger in signaling pathways relevant to nutrient and immunity responses. Thus, measuring calcium levels in plants is important for studies of plant biology and for technology development in food, agriculture, energy, and forest industries. Often, calcium in plants has been measured through techniques such as atomic absorption spectrophotometry (AAS), inductively coupled plasma-mass spectrometry (ICP-MS), and electrophysiology. These techniques, however, require large sample sizes, chemical extraction of samples or have limited spatial resolution. Here, we used near-edge X-ray absorption fine structure (NEXAFS) spectroscopy at the calcium L- and K-edges to measure the calcium to carbon mass ratio with spatial resolution in plant samples without requiring chemical extraction or large sample sizes. We demonstrate that the integrated absorbance at the calcium L-edge and the edge jump in the fluorescence yield at the calcium K-edge can be used to quantify the calcium content as the calcium mass fraction, and validate this approach with onion epidermal peels and ICP-MS. We also used NEXAFS to estimate the calcium mass ratio in hypocotyls of a model plant, Arabidopsis thaliana, which has a cell wall composition that is similar to that of onion epidermal peels. These results show that NEXAFS spectroscopy performed at the calcium edge provides an approach to quantify calcium levels within plants, which is crucial for understanding plant physiology and advancing plant-based materials.

Evidence that gecko setae are coated with an ordered nanometre-thin lipid film

The fascinating adhesion of gecko to virtually any material has been related to surface interactions of myriads of spatula at the tips of gecko feet. Surprisingly, the molecular details of the surface chemistry of gecko adhesion are still largely unknown. Lipids have been identified within gecko adhesive pads. However, the location of the lipids, the extent to which spatula are coated with lipids, and how the lipids are structured are still open questions. Lipids can modulate adhesion properties and surface hydrophobicity and may play an important role in adhesion. We have therefore studied the molecular structure of lipids at spatula surfaces using near-edge X-ray absorption fine structure imaging. We provide evidence that a nanometre-thin layer of lipids is present at the spatula surfaces of the tokay gecko (Gekko gecko) and that the lipids form ordered, densely packed layers. Such dense, thin lipid layers can effectively protect the spatula proteins from dehydration by forming a barrier against water evaporation. Lipids can also render surfaces hydrophobic and thereby support the gecko adhesive system by enhancement of hydrophobic-hydrophobic interactions with surfaces.

Structure of Keratins in Adhesive Gecko Setae Determined by Near-Edge X-ray Absorption Fine Structure Spectromicroscopy

Geckos have the astonishing ability to climb on vertical surfaces due to the adhesive properties of fibrous setae at the tips of their toe pads. While the adhesion mechanism principle, based on van der Waals interactions of myriads of spatula located at the outermost end of the setal arrays, has been studied extensively, there are still open questions about the chemistry of gecko setae. The gecko adhesive system is based on keratin fibrils assembled to support the entire setal structure. At the same time, the structure and alignment of keratin molecules within the ultrafine spatula tissue, which can support the enormous mechanical strain, still remain unknown. We have studied the molecular structure of gecko spatula using near-edge X-ray absorption fine structure (NEXAFS) imaging. We indeed found that the setae consist of a β-sheet structure aligned with the adhesion direction of the setae. Such alignment may provide mechanical stability to the setae and resistance to wear across different length scales.

The Tribological Adaptability for Ventral Scales of Dinodon rufozonatum in Dry/Wet/Rough Environments

The ventral scales of Dinodon rufozonatum were investigated to understand the outstanding tribological adaptability in various environments. The coefficient of friction (COF) of ventral scales was measured and changed with the contact conditions. It was discovered that the COF of scales under water-lubrication conditions (WLC) was larger than that under dry conditions (DC). More interestingly, the COF increased first and then decreased as the substrate roughness reduced. The abrasion marks on scales were then observed. The results indicated that the scales in DC wore more gently than that in WLC. Moreover, the degree of wear reduced with the decrease of substrate roughness. The frictional performance of ventral scales enabled the snakes to move more efficiently, quickly, and flexibly in multiple environments.

Surface chemistry of the ladybird beetle adhesive foot fluid across various substrates

Nature has coevolved highly adaptive and reliable bioadhesives across a multitude of animal species. Much attention has been paid in recent years to selectively mimic these adhesives for the improvement of a variety of technologies. However, very few of the chemical mechanisms that drive these natural adhesives are well understood. Many insects combine hairy feet with a secreted adhesive fluid, allowing for adhesion to considerably rough and slippery surfaces. Insect adhesive fluids have evolved highly specific compositions which are consistent across most surfaces and optimize both foot adhesion and release in natural environments. For example, beetles are thought to have adhesive fluids made up of a complex molecular mixture containing both hydrophobic and hydrophilic parts. We hypothesize that this causes the adhesive interface to be dynamic, with molecules in the fluid selectively organizing and ordering at surfaces with complimentary hydrophobicity to maximize adhesion. In this study, we examine the adhesive fluid of a seven-spotted ladybird beetle with a surface-sensitive analytical technique, sum frequency generation spectroscopy, as the fluid interacts with three substrates of varied wettabilities. The resulting spectra present no evidence of unique molecular environments between hydrophilic and hydrophobic surfaces but exhibit significant differences in the ordering of hydrocarbons. This change in surface interactions across different substrates correlates well with traction forces measured from beetles interacting with substrates of increasing hydrophobicities. We conclude that insect adhesion is dependent upon a dynamic molecular-interfacial response to an environmental surface.

Functional consequences of convergently evolved microscopic skin features on snake locomotion

The small structures that decorate biological surfaces can significantly affect behavior, yet the diversity of animal-environment interactions essential for survival makes ascribing functions to structures challenging. Microscopic skin textures may be particularly important for snakes and other limbless locomotors, where substrate interactions are mediated solely through body contact. While previous studies have characterized ventral surface features of some snake species, the functional consequences of these textures are not fully understood. Here, we perform a comparative study, combining atomic force microscopy measurements with mathematical modeling to generate predictions that link microscopic textures to locomotor performance. We discover an evolutionary convergence in the ventral skin structures of a few sidewinding specialist vipers that inhabit sandy deserts-an isotropic texture that is distinct from the head-to-tail-oriented, micrometer-sized spikes observed on a phylogenetically broad sampling of nonsidewinding vipers and other snakes from diverse habitats and wide geographic range. A mathematical model that relates structural directionality to frictional anisotropy reveals that isotropy enhances movement during sidewinding, whereas anisotropy improves movement during slithering via lateral undulation of the body. Our results highlight how an integrated approach can provide quantitative predictions for structure-function relationships and insights into behavioral and evolutionary adaptations in biological systems.

Influence of surface morphology and internal structure on the mechanical properties and tribological response of Boa Red Tail and Python Regius snake skin

The understanding of the tribological behavior of natural structures has been used as inspiration to design and optimize surfaces for diverse applications in engineering. In the present work, morphological, microstructural, mechanical and tribological characterization of the shed skin of two snake species, namely Boa Red Tail and Python Regius was carried out. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) analyses showed the existence of deterministic patterns, i.e., ordered arrays of geometrical features at the surface, while Transmission Electron Microscopy (TEM) allowed studying the internal structure and chemical composition of the skin sheds. Nanoindentation measurements showed significant variations in hardness and elastic modulus from the surface to the inner layers of the skin, and pin-on-disc tests revealed anisotropic behavior of the friction coefficient (COF) as a function of the sliding direction against balsa wood in dry conditions. Correlations between the friction data, nano-indentation mechanical properties and subsurface skin structure were established for both species taking into account the ways in which the skins' deterministic patterns influence the tribological performance.

NEXAFS imaging to characterize the physio-chemical composition of cuticle from African Flower Scarab Eudicella gralli

The outermost surface of insect cuticle is a high-performance interface that provides wear protection, hydration, camouflage and sensing. The complex and inhomogeneous structure of insect cuticle imposes stringent requirements on approaches to elucidate its molecular structure and surface chemistry. Therefore, a molecular understanding and possible mimicry of the surface of insect cuticle has been a challenge. Conventional optical and electron microscopies as well as biochemical techniques provide information about morphology and chemistry but lack surface specificity. We here show that a near edge X-ray absorption fine structure microscope at the National Synchrotron Light Source can probe the surface chemistry of the curved and inhomogeneous cuticle of the African flower scarab. The analysis shows the distribution of organic and inorganic surface species while also hinting at the presence of aragonite at the dorsal protrusion region of the Eudicella gralli head, in line with its biological function.

Biology serves as inspiration in materials development; this requires improved understanding of the surface chemistry responsible for processes which are being mimicked. Here, the authors report on the use of near edge X-ray absorption fine structure (NEXAFS) imaging to analyze the surface chemistry of insect cuticle.

Ontogenetic scaling patterns of lizard skin surface structure as revealed by gel-based stereo-profilometry

The skin surface structure of squamate reptiles varies greatly among species, likely because it plays a key role in a range of tasks, such as camouflage, locomotion, self-cleaning, mitigation of water loss and protection from physical damage. Although we have foundational knowledge about squamate skin morphology, we still know remarkably little about how intraspecific variation in skin surface structure translates to functional variation. This gap in our understanding can be in part traced back to: (i) our lack of knowledge on how body size determines skin surface structure; and (ii) the lack of means to perform high-throughput and detailed analysis of the three-dimensional (3D) anatomy of reptilian skin surfaces in a non-destructive manner. To fill this gap, we explored the possibilities of a new imaging technique, termed gel-based stereo-profilometry, to visualize and quantify the 3D topography of reptilian skin surface structure. Using this novel approach, we investigated intra-specific and intra-individual variation in the skin surface morphology of a focal lizard species, Anolis cristatellus. We assessed how various characteristics of surface topography (roughness, skew and kurtosis) and scale morphology (area, height, width and shape) scale with body size across different body regions. Based on an ontogenetic series of A. cristatellus males, we show that skin roughness increases with body size. Skin patches on the ventral body region of lizards were rougher than on the dorsum, but this was a consequence of ventral scales being larger than dorsal scales. Dorsal surface skew and kurtosis varied with body size, but surfaces on the ventral skin showed no such relationship. Scale size scaled isometrically with body size, and while ventral scales differed in shape from dorsal scales, scale shape did not change with ontogeny. Overall, this study demonstrates that gel-based stereo-profilometry is a promising method to rapidly assess the 3D surface structure of reptilian skin at the microscopic level. Additionally, our findings of the explanatory power of body size on skin surface diversity provide a foundation for future studies to disentangle the relationships among morphological, functional and ecological diversity in squamate reptile skin surfaces.

The Friction Properties of Firebrat Scales

Friction is an important subject for sustainability due to problems that are associated with energy loss. In recent years, micro- and nanostructured surfaces have attracted much attention to reduce friction; however, suitable structures are still under consideration. Many functional surfaces are present in nature, such as the friction reduction surfaces of snake skins. In this study, we focused on firebrats, Thermobia domestica, which temporary live in narrow spaces, such as piled papers, so their body surface (integument) is frequently in contact with surrounding substrates. We speculate that, in addition to optical, cleaning effects, protection against desiccation and enemies, their body surface may be also adapted to reduce friction. To investigate the functional effects of the firebrat scales, firebrat surfaces were observed using a field-emission scanning electron microscope (FE-SEM) and a colloidal probe atomic force microscope (AFM). Results of surface observations by FE-SEM revealed that adult firebrats are entirely covered with scales, whose surfaces have microgroove structures. Scale groove wavelengths around the firebrat's head are almost uniform within a scale but they vary between scales. At the level of single scales, AFM friction force measurements revealed that the firebrat scale reduces friction by decreasing the contact area between scales and a colloidal probe. The heterogeneity of the scales' groove wavelengths suggests that it is difficult to fix the whole body on critical rough surfaces and may result in a "fail-safe" mechanism.

Sustainable and long-time 'rejuvenation' of biomimetic water-repellent silica coating on polyester fabrics induced by rough mechanical abrasion

The economical use of water-repellent coatings on polymeric materials in commercial and industrial applications is limited by their mechanical wear robustness and long-term durability. In this study, we demonstrate that polyethylene terephthalate (PET) fabric modified with inorganic, methyltrimethoxysilane (MTMS)-based coatings shows excellent resistance against various types of wear damage, thereby mimicking superhydrophobic biological materials. These features were facilitated by the rational design of coating processing that also enabled tunable hierarchical surface structure. A series of custom and standard testing protocols revealed that coating-to-substrate adhesion was remarkably high, as was the resistance to various mechanical abradents. The most intriguing characteristic observed during aging and abrasion cycles was the enhancement in non-wettability or 'rejuvenation' reflected by water droplet roll-off behavior, a characteristic of self-cleaning materials. Water-repellent properties of coated polyester were also enhanced by prolonged thermal annealing and were maintained after custom laundry. The developed technology offers opportunities to design low cost, durable and functional textiles for both indoor and outdoor applications.

Histology of the Skin of Three Limbless Squamates Dwelling in Mesic and Arid Environments

The skin of limbless squamates has an increased contact with the substrate compared with limbed counterparts. Comparatively, the contact with the substrate is intensified in fossorial species, where the whole circumference of the body interacts with the soil during underground locomotion. Although fossoriality in Squamata, specifically lizards and snakes, has been studied ecologically and morphologically (e.g., osteological changes), not enough detail is yet available regarding changes in organs critical for underground lifestyle such as the skin. Here we used histological and microscopical techniques (scanning electron microscopy and transmission electron microscopy) to uncover the structural detail of the epidermis and dermis in three limbless reptiles, the amphisbaenian Diplometopon zarudnyi, and two snakes, Indotyphlops braminus (Typhlopidae) and Cerastes cerastes (Viperidae). The skin of these taxa shows pronounced morphological diversity, which is likely associated to different environmental and functional demands upon these reptiles. Anat Rec, 299:979-989, 2016. © 2016 Wiley Periodicals, Inc.