Gene transfer to Clostridium cellulolyticum ATCC 35319

Consolidated bioprocessing of cassava starch into butyric acid and butanol by engineered Clostridium butyricum SCUT 620

Clostridium butyricum SCUT 620, a promising biorefinery chassis, has been demonstrated to efficiently utilize monosaccharides, disaccharides, and polysaccharides for butyric acid production. However, the absence of genetic manipulation tools has restricted its further development and application. For the first time, an efficient electroporation method for C. butyricum SCUT 620 was developed based on the analysis of the restriction-modification system and in vivo methylation. The highest electrotransformation efficiency reached 785 transformants/μg DNA after optimizing electroporation parameters. As a proof of concept, C. butyricum SCUT 620 was genetically modified to improve starch hydrolysis and butyrate tolerance, and to enable the synthesis of a new product, butanol, using non-grain biomass cassava starch. This study paves the way for the metabolic engineering of C. butyricum SCUT 620, with the objective of achieving various substrates utilization and chemicals production.

Using Cupriavidus necator H16 to Provide a Roadmap for Increasing Electroporation Efficiency in Nonmodel Bacteria

Bacteria are a treasure trove of metabolic reactions, but most industrial biotechnology applications rely on a limited set of established host organisms. In contrast, adopting nonmodel bacteria for the production of various chemicals of interest is often hampered by their limited genetic amenability coupled with their low transformation efficiency. In this study, we propose a series of steps that can be taken to increase electroporation efficiency in nonmodel bacteria. As a test strain, we use Cupriavidus necator H16, a lithoautotrophic bacterium that has been engineered to produce a wide range of products from CO2 and hydrogen. However, its low electroporation efficiency hampers the high-throughput genetic engineering required to develop C. necator into an industrially relevant host organism. Thus, conjugation has often been the method of choice for introducing exogenous DNA, especially when introducing large plasmids or suicide plasmids. We first propose a species-independent technique based on natively methylated DNA and Golden Gate assembly to increase one-pot cloning and electroporation efficiency by 70-fold. Second, bioinformatic tools were used to predict defense systems and develop a restriction avoidance strategy that was used to introduce suicide plasmids by electroporation to obtain a domesticated strain. The results are discussed in the context of metabolic engineering of nonmodel bacteria.

Current perspective in research and industrial applications of microbial cellulases

The natural interactions between various bacteria, fungi, and other cellulolytic microorganisms destroy lignocellulosic polymers. The efficacy of this process is determined by the combined action of three main enzymes: endoglucanases, exo-glucanases, and β-glucosidase. The enzyme attacks the polymeric structure's β-1,4-linkages during the cellulose breakdown reaction. This mechanism is crucial for the environment as it recycles cellulose in the biosphere. However, there are problems with enzymatic cellulose breakdown, including complex cellulase structure, insufficient degradation efficacy, high production costs, and post-translational alterations, many of which are closely related to certain unidentified cellulase properties. These issues impede the practical use of cellulases. A developing area of research is the application of this similar paradigm for industrial objectives. Cellulase enzyme exhibits greater promise in many critical industries, including biofuel manufacture, textile smoothing and finishing, paper and pulp manufacturing, and farming. However, the study on cellulolytic enzymes must move forward in various directions, including increasing the activity of cellulase as well as designing peptides to give biocatalysts their desired attributes. This manuscript includes an overview of current research on different sources of cellulases, their production, and biochemical characterization.

Role of the Solute-Binding Protein CuaD in the Signaling and Regulating Pathway of Cellobiose and Cellulose Utilization in Ruminiclostridium cellulolyticum

In Ruminiclostridium cellulolyticum, cellobiose is imported by the CuaABC ATP-binding cassette transporter containing the solute-binding protein (SBP) CuaA and is further degraded in the cytosol by the cellobiose phosphorylase CbpA. The genes encoding these proteins have been shown to be essential for cellobiose and cellulose utilization. Here, we show that a second SBP (CuaD), whose gene is adjacent to two genes encoding a putative two-component regulation system (CuaSR), forms a three-component system with CuaS and CuaR. Studies of mutant and recombinant strains of R. cellulolyticum have indicated that cuaD is important for the growth of strains on cellobiose and cellulose. Furthermore, the results of our RT-qPCR experiments suggest that both the three (CuaDSR)- and the two (CuaSR)-component systems are able to perceive the cellobiose signal. However, the strain producing the three-component system is more efficient in its cellobiose and cellulose utilization. As CuaD binds to CuaS, we propose an in-silico model of the complex made up of two extracellular domains of CuaS and two of CuaD. CuaD allows microorganisms to detect very low concentrations of cellobiose due to its high affinity and specificity for this disaccharide, and together with CuaSR, it triggers the expression of the cuaABC-cbpA genes involved in cellodextrins uptake.

Target integration of an exogenous β-glucosidase enhances cellulose degradation and ethanol production in Clostridium cellulolyticum

The bacteria Clostridium cellulolyticum is a promising candidate for consolidated bioprocessing (CBP). However, genetic engineering is necessary to improve this organism's cellulose degradation and bioconversion efficiencies to meet standard industrial requirements. In this study, CRISPR-Cas9n was used to integrate an efficient β-glucosidase into the genome of C. cellulolyticum, disrupting lactate dehydrogenase (ldh) expression and reducing lactate production. The engineered strain showed a 7.4-fold increase in β-glucosidase activity, a 70% decrease in ldh expression, a 12% increase in cellulose degradation, and a 32% increase in ethanol production compared to wild type. Additionally, ldh was identified as a potential site for heterologous expression. These results demonstrate that simultaneous β-glucosidase integration and lactate dehydrogenase disruption is an effective strategy for increasing cellulose to ethanol bioconversion rates in C. cellulolyticum.

Tuning of Gene Expression in Clostridium phytofermentans Using Synthetic Promoters and CRISPRi

Control of gene expression is fundamental to cell engineering. Here we demonstrate a set of approaches to tune gene expression in Clostridia using the model Clostridium phytofermentans. Initially, we develop a simple benchtop electroporation method that we use to identify a set of replicating plasmids and resistance markers that can be cotransformed into C. phytofermentans. We define a series of promoters spanning a >100-fold expression range by testing a promoter library driving the expression of a luminescent reporter. By insertion of tet operator sites upstream of the reporter, its expression can be quantitatively altered using the Tet repressor and anhydrotetracycline (aTc). We integrate these methods into an aTc-regulated dCas12a system with which we show in vivo CRISPRi-mediated repression of reporter and fermentation genes in C. phytofermentans. Together, these approaches advance genetic transformation and experimental control of gene expression in Clostridia.

Genetic manipulation of gut microbes enables single-gene interrogation in a complex microbiome

Hundreds of microbiota genes are associated with host biology/disease. Unraveling the causal contribution of a microbiota gene to host biology remains difficult because many are encoded by nonmodel gut commensals and not genetically targetable. A general approach to identify their gene transfer methodology and build their gene manipulation tools would enable mechanistic dissections of their impact on host physiology. We developed a pipeline that identifies the gene transfer methods for multiple nonmodel microbes spanning five phyla, and we demonstrated the utility of their genetic tools by modulating microbiome-derived short-chain fatty acids and bile acids in vitro and in the host. In a proof-of-principle study, by deleting a commensal gene for bile acid synthesis in a complex microbiome, we discovered an intriguing role of this gene in regulating colon inflammation. This technology will enable genetically engineering the nonmodel gut microbiome and facilitate mechanistic dissection of microbiota-host interactions.

Cas9 Nickase-Based Genome Editing in Clostridium cellulolyticum

Clostridium cellulolyticum is a model mesophilic, cellulolytic bacterium, with the potential to produce biofuels from lignocellulose. However, the natural cellulose utilization efficiency is quite low and, therefore, metabolically engineered strains with increased efficiency can decrease both the overall cost and time required for biofuel production. Traditional genetic tools are inefficient, expensive, and time-consuming, but recent developments in the use of CRISPR-Cas genetic editing systems have greatly expanded our ability to reprogram cells. Here we describe an established protocol enabling one-step versatile genome editing in C. cellulolyticum. It integrates Cas9 nickase (Cas9n) which introduces a single nick that triggers repair via homologous recombination (SNHR) to edit genomic loci with high efficiency and accuracy. This one-step editing is achieved by transforming an all-in-one vector to coexpress Cas9n and a single guide RNA (gRNA) and carries a user-defined homologous donor template to promote SNHR at a desired target site. Additionally, this system has high specificity and allows for various types of genomic editing, including markerless insertions, deletions, substitutions, and even multiplex editing.

Development of an in vivo methylation system for transformation of Ruminiclostridium cellulolyticum

AIMS

Ruminiclostridium cellulolyticum, an anaerobic cellulolytic bacterium producing an efficient cellulolytic extracellular complex named cellulosome, is a promising host for biofuel production from lignocellulose. This study aims to develop a rapid transformation method for R. cellulolyticum avoiding its restriction system.

METHODS AND RESULTS

The CceI restriction system is a major barrier to introduction of foreign DNA into R. cellulolyticum cells. To improve the transformation efficiency of R. cellulolyticum, the gene encoding CceI methyltransferase (M.CceI) of R. cellulolyticum H10 was functionally expressed in Escherichia coli, resulting in an in vivo methylation system for transformation of R. cellulolyticum. The electrotransformation experiments of R. cellulolyticum H10 with the E. coli-Clostridium shuttle plasmid pMTC6 showed that the transformation efficiency reached up to 2.6 × 10³ ±0.23 × 10³  CFU per μg plasmid DNA. The results demonstrated that the system is able to confer the M.CceI-specific DNA methylation pattern to its resident plasmid, which makes the plasmid resistant to the CceI restriction and efficiently transferred into R. cellulolyticum.

CONCLUSIONS

In this study, we generated an in vivo methylation system of R. cellulolyticum, allowing interspecies DNA transfer and improving transformation efficiency.

SIGNIFICANCE AND IMPACT OF THE STUDY

This research result will greatly facilitate the metabolic engineering of R. cellulolyticum for biofuel production directly from cellulose.

Handling Several Sugars at a Time: a Case Study of Xyloglucan Utilization by Ruminiclostridium cellulolyticum

Xyloglucan utilization by Ruminiclostridium cellulolyticum was formerly shown to imply the uptake of large xylogluco-oligosaccharides, followed by cytosolic depolymerization into glucose, galactose, xylose, and cellobiose. This raises the question of how the anaerobic bacterium manages the simultaneous presence of multiple sugars. Using genetic and biochemical approaches targeting the corresponding metabolic pathways, we observed that, surprisingly, all sugars are catabolized, collectively, but glucose consumption is prioritized. Most selected enzymes display unusual features, especially the GTP-dependent hexokinase of glycolysis, which appeared reversible and crucial for xyloglucan utilization. In contrast, mutant strains lacking either galactokinase, cellobiose-phosphorylase, or xylulokinase still catabolize xyloglucan but display variably altered growth. Furthermore, the xylogluco-oligosaccharide depolymerization process appeared connected to the downstream pathways through an intricate network of competitive and noncompetitive inhibitions. Altogether, our data indicate that xyloglucan utilization by R. cellulolyticum relies on an energy-saving central carbon metabolism deviating from current bacterial models, which efficiently prevents carbon overflow. IMPORTANCE The study of the decomposition of recalcitrant plant biomass is of great interest as the limiting step of terrestrial carbon cycle and to produce plant-derived valuable chemicals and energy. While extracellular cellulose degradation and catabolism have been studied in detail, few publications describe the complete metabolism of hemicelluloses and, to date, the published models are limited to the extracellular degradation and sequential entry of simple sugars. Here, we describe how the model anaerobic bacterium Ruminiclostridium cellulolyticum deals with the synchronous intracellular release of glucose, galactose, xylose, and cellobiose upon cytosolic depolymerization of imported xyloglucan oligosaccharides. The described novel metabolic strategy involves the simultaneous activity of different metabolic pathways coupled to a network of inhibitions controlling the carbon flux and is distinct from the ubiquitously observed sequential uptake and metabolism of carbohydrates known as the diauxic shift. Our results highlight the diversity of cellular responses related to a complex environment.

Thermophilic microbial deconstruction and conversion of natural and transgenic lignocellulose

The potential to convert renewable plant biomasses into fuels and chemicals by microbial processes presents an attractive, less environmentally intense alternative to conventional routes based on fossil fuels. This would best be done with microbes that natively deconstruct lignocellulose and concomitantly form industrially relevant products, but these two physiological and metabolic features are rarely and simultaneously observed in nature. Genetic modification of both plant feedstocks and microbes can be used to increase lignocellulose deconstruction capability and generate industrially relevant products. Separate efforts on plants and microbes are ongoing, but these studies lack a focus on optimal, complementary combinations of these disparate biological systems to obtain a convergent technology. Improving genetic tools for plants have given rise to the generation of low-lignin lines that are more readily solubilized by microorganisms. Most focus on the microbiological front has involved thermophilic bacteria from the genera Caldicellulosiruptor and Clostridium, given their capacity to degrade lignocellulose and to form bio-products through metabolic engineering strategies enabled by ever-improving molecular genetics tools. Bioengineering plant properties to better fit the deconstruction capabilities of candidate consolidated bioprocessing microorganisms has potential to achieve the efficient lignocellulose deconstruction needed for industrial relevance.

Enzyme-Primed Native Chemical Ligation Produces Autoinducing Cyclopeptides in Clostridia

Clostridia coordinate many important processes such as toxin production, infection, and survival by density‐dependent communication (quorum sensing) using autoinducing peptides (AIPs). Although clostridial AIPs have been proposed to be (thio)lactone‐containing peptides, their true structures remain elusive. Here, we report the genome‐guided discovery of an AIP that controls endospore formation in Ruminiclostridium cellulolyticum. Through a combination of chemical synthesis and chemical complementation assays with a mutant strain, we reveal that the genuine chemical mediator is a homodetic cyclopeptide (cAIP). Kinetic analyses indicate that the mature cAIP is produced via a cryptic thiolactone intermediate that undergoes a rapid S→N acyl shift, in a manner similar to intramolecular native chemical ligation (NCL). Finally, by implementing a chemical probe in a targeted screen, we show that this novel enzyme‐primed, intramolecular NCL is a widespread feature of clostridial AIP biosynthesis.

Genetic and metabolic engineering challenges of C1-gas fermenting acetogenic chassis organisms

Unabated mining and utilisation of petroleum and petroleum resources and their conversion to essential fuels and chemicals have drastic environmental consequences, contributing to global warming and climate change. In addition, fossil fuels are finite resources, with a fast-approaching shortage. Accordingly, research efforts are increasingly focusing on developing sustainable alternatives for chemicals and fuels production. In this context, bioprocesses, relying on microorganisms, have gained particular interest. For example, acetogens use the Wood-Ljungdahl pathway to grow on single carbon C1-gases (CO2 and CO) as their sole carbon source and produce valuable products such as acetate or ethanol. These autotrophs can, therefore, be exploited for large-scale fermentation processes to produce industrially relevant chemicals from abundant greenhouse gases. In addition, genetic tools have recently been developed to improve these chassis organisms through synthetic biology approaches. This review will focus on the challenges of genetically and metabolically modifying acetogens. It will first discuss the physical and biochemical obstacles complicating successful DNA transfer in these organisms. Current genetic tools developed for several acetogens, crucial for strain engineering to consolidate and expand their catalogue of products, will then be described. Recent tool applications for metabolic engineering purposes to allow redirection of metabolic fluxes or production of non-native compounds will lastly be covered.

Approaches to genetic tool development for rapid domestication of non-model microorganisms

Non-model microorganisms often possess complex phenotypes that could be important for the future of biofuel and chemical production. They have received significant interest the last several years, but advancement is still slow due to the lack of a robust genetic toolbox in most organisms. Typically, "domestication" of a new non-model microorganism has been done on an ad hoc basis, and historically, it can take years to develop transformation and basic genetic tools. Here, we review the barriers and solutions to rapid development of genetic transformation tools in new hosts, with a major focus on Restriction-Modification systems, which are a well-known and significant barrier to efficient transformation. We further explore the tools and approaches used for efficient gene deletion, DNA insertion, and heterologous gene expression. Finally, more advanced and high-throughput tools are now being developed in diverse non-model microbes, paving the way for rapid and multiplexed genome engineering for biotechnology.

A Novel Two-Component System, XygS/XygR, Positively Regulates Xyloglucan Degradation, Import, and Catabolism in Ruminiclostridium cellulolyticum

Cellulolytic microorganisms play a key role in the global carbon cycle by decomposing structurally diverse plant biopolymers from dead plant matter. These microorganisms, in particular anaerobes such as Ruminiclostridium cellulolyticum that are capable of degrading and catabolizing several different polysaccharides, require a fine-tuned regulation of the biosynthesis of their polysaccharide-degrading enzymes. In this study, we present a bacterial regulatory system involved in the regulation of genes enabling the metabolism of the ubiquitous plant polysaccharide xyloglucan. The characterization of R. cellulolyticum knockout mutants suggests that the response regulator XygR and its cognate histidine kinase XygS are essential for growth on xyloglucan. Using in vitro and in vivo analyses, we show that XygR binds to the intergenic region and activates the expression of two polycistronic transcriptional units encoding an ABC transporter dedicated to the uptake of xyloglucan oligosaccharides and the two-component system itself together with three intracellular glycoside hydrolases responsible for the sequential intracellular degradation of the imported oligosaccharides into mono- and disaccharides. Interestingly, XygR also upregulates the expression of a distant gene coding for the most active extracellular cellulosomal xyloglucanase of R. cellulolyticum by binding to the upstream intergenic region.IMPORTANCE Ruminiclostridium cellulolyticum is a Gram-positive, mesophilic, anaerobic, cellulolytic, and hemicellulolytic bacterium. The last property qualifies this species as a model species for the study of hemicellulose degradation, import of degradation products, and overall regulation of these phenomena. In this study, we focus on the regulation of xyloglucan dextrin import and intracellular degradation and show that the two components of the two-component regulation system XygSR are essential for growth on xyloglucan and that the response regulator XygR regulates the transcription of genes involved in the extracellular degradation of the polysaccharide, the import of degradation products, and their intracellular degradation.

Enhancing plasmid transformation efficiency and enabling CRISPR-Cas9/Cpf1-based genome editing in Clostridium tyrobutyricum

Clostridium tyrobutyricum ATCC 25755 is known as a natural hyper-butyrate producer with great potentials as an excellent platform to be engineered for valuable biochemical production from renewable resources. However, limited transformation efficiency and the lack of genetic manipulation tools have hampered the broader applications of this micro-organism. In this study, the effects of Type I restriction-modification system and native plasmid on conjugation efficiency of C. tyrobutyricum were investigated through gene deletion. The deletion of Type I restriction endonuclease resulted in a 3.7-fold increase in conjugation efficiency, while the additional elimination of the native plasmid further enhanced conjugation efficiency to 6.05 ± 0.75 × 10³ CFU/ml-donor, which was 15.3-fold higher than the wild-type strain. Fermentation results indicated that the deletion of those two genetic elements did not significantly influence the end-products production in the resultant mutant ΔRMIΔNP. Thanks to the increased conjugation efficiency, the CRISPR-Cas9/Cpf1 systems, which previously could not be implemented in C. tyrobutyricum, were successfully employed for genome editing in ΔRMIΔNP with an efficiency of 12.5-25%. Altogether, approaches we developed herein offer valuable guidance for establishing efficient DNA transformation methods in nonmodel micro-organisms. The ΔRMIΔNP mutant can serve as a great chassis to be engineered for diverse valuable biofuel and biochemical production.

Precise promoter integration improves cellulose bioconversion and thermotolerance in Clostridium cellulolyticum

Lignocellulose has been used for production of sustainable biofuels and value-added chemicals. However, the low-efficiency bioconversion of lignocellulose greatly contributes to a high production cost. Here, we employed CRISPR-Cas9 editing to improve cellulose degradation efficiency by editing a regulatory element of the cip-cel gene cluster in Clostridium cellulolyticum. Insertion of a synthetic promoter (P4) and an endogenous promoter (P2) in the mspI-deficient parental strain (Δ2866) created chromosomal integrants, P4-2866 and P2-2866, respectively. Both engineered strains increased the transcript abundance of downstream polycistronic genes and enhanced in vitro cellulolytic activities of isolated cellulosomes. A high cellulose load of 20 g/L suppressed cellulose degradation in the parental strain in the first 150 h fermentation; whereas P4-2866 and P2-2866 hydrolyzed 29% and 53% of the cellulose, respectively. Both engineered strains also demonstrated a greater growth rate and a higher cell biomass yield. Interestingly, the Δ2866 parental strain demonstrated better thermotolerance than the wildtype strain, and promoter insertion further enhanced thermotolerance. Similar improvements in cell growth and cellulose degradation were reproduced by promoter insertion in the wildtype strain and a lactate production-defective mutant (LM). P2 insertion in LM increased ethanol titer by 65%. Together, the editing of regulatory elements of catabolic gene clusters provides new perspectives on improving cellulose bioconversion in microbes.

Factors and Conditions That Impact Electroporation of Clostridioides difficile Strains

Understanding the underlying biology of pathogens is essential to develop novel treatment options. To drive this understanding, genetic tools are essential. In recent years, the genetic toolbox available to Clostridioides difficile researchers has expanded significantly but still requires the conjugal transfer of DNA from a donor strain into C. difficile. Here we describe an electroporation-based transformation protocol that was effective at introducing existing genetic tools into different C. difficile strains.

An important risk factor for acquiring Clostridioides difficile infection is antibiotic use. Therefore, a detailed knowledge of the physiology and the virulence factors can help drive the development of new diagnostic tools and nonantibiotic therapeutic agents to combat these organisms. Several genetic systems are available to study C. difficile in the laboratory environment, and all rely on stably replicating or segregationally unstable plasmids. Currently, the transfer of plasmids into C. difficile can only be performed by conjugation using Escherichia coli or Bacillus subtilis as conjugal donors. Here we report a method to introduce plasmid DNA into C. difficile using electroporation and test factors that might contribute to higher transformation efficiencies: osmolyte used to stabilize weakened cells, DNA concentration, and recovery time postelectroporation. Depending on the C. difficile strain and plasmid used, this transformation protocol achieves between 20 and 200 colonies per microgram of DNA and is mostly influenced by the recovery time postelectroporation. Based on our findings, we recommend that each strain be tested for the optimum recovery time in each lab.

IMPORTANCE Understanding the underlying biology of pathogens is essential to develop novel treatment options. To drive this understanding, genetic tools are essential. In recent years, the genetic toolbox available to Clostridioides difficile researchers has expanded significantly but still requires the conjugal transfer of DNA from a donor strain into C. difficile. Here we describe an electroporation-based transformation protocol that was effective at introducing existing genetic tools into different C. difficile strains.

In vitro and in vivo exploration of the cellobiose and cellodextrin phosphorylases panel in Ruminiclostridium cellulolyticum: implication for cellulose catabolism

BACKGROUND

In anaerobic cellulolytic micro-organisms, cellulolysis results in the action of several cellulases gathered in extracellular multi-enzyme complexes called cellulosomes. Their action releases cellobiose and longer cellodextrins which are imported and further degraded in the cytosol to fuel the cells. In Ruminiclostridium cellulolyticum, an anaerobic and cellulolytic mesophilic bacteria, three cellodextrin phosphorylases named CdpA, CdpB, and CdpC, were identified in addition to the cellobiose phosphorylase (CbpA) previously characterized. The present study aimed at characterizing them, exploring their implication during growth on cellulose to better understand the life-style of cellulolytic bacteria on such substrate.

RESULTS

The three cellodextrin phosphorylases from R. cellulolyticum displayed marked different enzymatic characteristics. They are specific for cellodextrins of different lengths and present different k _cat values. CdpC is the most active enzyme before CdpA, and CdpB is weakly active. Modeling studies revealed that a mutation of a conserved histidine residue in the phosphate ion-binding pocket in CdpB and CdpC might explain their activity-level differences. The genes encoding these enzymes are scattered over the chromosome of R. cellulolyticum and only the expression of the gene encoding the cellobiose phosphorylase and the gene cdpA is induced during cellulose growth. Characterization of four independent mutants constructed in R. cellulolyticum for each of the cellobiose and cellodextrin phosphorylases encoding genes indicated that only the cellobiose phosphorylase is essential for growth on cellulose.

CONCLUSIONS

Unexpectedly, the cellobiose phosphorylase but not the cellodextrin phosphorylases is essential for the growth of the model bacterium on cellulose. This suggests that the bacterium adopts a "short" dextrin strategy to grow on cellulose, even though the use of long cellodextrins might be more energy-saving. Our results suggest marked differences in the cellulose catabolism developed among cellulolytic bacteria, which is a result that might impact the design of future engineered strains for biomass-to-biofuel conversion.

Homologous overexpression of hydrogenase and glycerol dehydrogenase in Clostridium pasteurianum to enhance hydrogen production from crude glycerol

This study reports engineering of a hypertransformable variant of C. pasteurianum for bioconversion of glycerol into hydrogen (H₂). A functional glycerol-triggered hydrogen pathway was engineered based on two approaches: (1) increasing product yield by overexpression of immediate enzyme catalyzing H₂ production, (2) increasing substrate uptake by overexpression of enzymes involved in glycerol utilization. The first strategy aimed at overexpression of hydA gene encoding hydrogenase, and the second one, through combination of overexpression of dhaD1 and dhaK genes encoding glycerol dehydrogenase and dihydroxyacetone kinase. These genetic manipulations resulted in two recombinant strains (hydA⁺⁺/dhaD1K⁺⁺) capable of producing 97% H₂ (v/v), with yields of 1.1 mol H₂/mol glycerol in hydA overexpressed strain, and 0.93 mol H₂/mol glycerol in dhaD1K overexpressed strain, which was 1.5 fold higher than wild type. Among two strains, dhaD1K⁺⁺ consumed more glycerol than hydA⁺⁺ which proves that overexpression of glycerol enzymes has enhanced glycerol intake rate.

Development of a metabolic pathway transfer and genomic integration system for the syngas-fermenting bacterium Clostridium ljungdahlii

BACKGROUND

Clostridium spp. can synthesize valuable chemicals and fuels by utilizing diverse waste-stream substrates, including starchy biomass, lignocellulose, and industrial waste gases. However, metabolic engineering in Clostridium spp. is challenging due to the low efficiency of gene transfer and genomic integration of entire biosynthetic pathways.

RESULTS

We have developed a reliable gene transfer and genomic integration system for the syngas-fermenting bacterium Clostridium ljungdahlii based on the conjugal transfer of donor plasmids containing large transgene cassettes (> 5 kb) followed by the inducible activation of Himar1 transposase to promote integration. We established a conjugation protocol for the efficient generation of transconjugants using the Gram-positive origins of replication repL and repH. We also investigated the impact of DNA methylation on conjugation efficiency by testing donor constructs with all possible combinations of Dam and Dcm methylation patterns, and used bisulfite conversion and PacBio sequencing to determine the DNA methylation profile of the C. ljungdahlii genome, resulting in the detection of four sequence motifs with N⁶-methyladenosine. As proof of concept, we demonstrated the transfer and genomic integration of a heterologous acetone biosynthesis pathway using a Himar1 transposase system regulated by a xylose-inducible promoter. The functionality of the integrated pathway was confirmed by detecting enzyme proteotypic peptides and the formation of acetone and isopropanol by C. ljungdahlii cultures utilizing syngas as a carbon and energy source.

CONCLUSIONS

The developed multi-gene delivery system offers a versatile tool to integrate and stably express large biosynthetic pathways in the industrial promising syngas-fermenting microorganism C. ljungdahlii. The simple transfer and stable integration of large gene clusters (like entire biosynthetic pathways) is expanding the range of possible fermentation products of heterologously expressing recombinant strains. We also believe that the developed gene delivery system can be adapted to other clostridial strains as well.

Function analysis of 5'-UTR of the cellulosomal xyl-doc cluster in Clostridium papyrosolvens

BACKGROUND

Anaerobic, mesophilic, and cellulolytic Clostridium papyrosolvens produces an efficient cellulolytic extracellular complex named cellulosome that hydrolyzes plant cell wall polysaccharides into simple sugars. Its genome harbors two long cellulosomal clusters: cip-cel operon encoding major cellulosome components (including scaffolding) and xyl-doc gene cluster encoding hemicellulases. Compared with works on cip-cel operon, there are much fewer studies on xyl-doc mainly due to its rare location in cellulolytic clostridia. Sequence analysis of xyl-doc revealed that it harbors a 5' untranslated region (5'-UTR) which potentially plays a role in the regulation of downstream gene expression. Here, we analyzed the function of 5'-UTR of xyl-doc cluster in C. papyrosolvens in vivo via transformation technology developed in this study.

RESULTS

In this study, we firstly developed an electrotransformation method for C. papyrosolvens DSM 2782 before the analysis of 5'-UTR of xyl-doc cluster. In the optimized condition, a field with an intensity of 7.5-9.0 kV/cm was applied to a cuvette (0.2 cm gap) containing a mixture of plasmid and late cell suspended in exponential phase to form a 5 ms pulse in a sucrose-containing buffer. Afterwards, the putative promoter and the 5'-UTR of xyl-doc cluster were determined by sequence alignment. It is indicated that xyl-doc possesses a long conservative 5'-UTR with a complex secondary structure encompassing at least two perfect stem-loops which are potential candidates for controlling the transcriptional termination. In the last step, we employed an oxygen-independent flavin-based fluorescent protein (FbFP) as a quantitative reporter to analyze promoter activity and 5'-UTR function in vivo. It revealed that 5'-UTR significantly blocked transcription of downstream genes, but corn stover can relieve its suppression.

CONCLUSIONS

In the present study, our results demonstrated that 5'-UTR of the cellulosomal xyl-doc cluster blocks the transcriptional activity of promoter. However, some substrates, such as corn stover, can relieve the effect of depression of 5'-UTR. Thus, it is speculated that 5'-UTR of xyl-doc was a putative riboswitch to regulate the expression of downstream cellulosomal genes, which is helpful to understand the complex regulation of cellulosome.

Development of an efficient host-vector system of Ruminiclostridium josui

Although Ruminiclostridium josui (formerly Clostridium josui), a strictly anaerobic mesophilic cellulolytic bacterium, is a promising candidate for biomass utilization via consolidated bioprocessing, its host-vector system has not yet been established. The existence of a restriction and modification system is a significant barrier to the transformation of R. josui. Here, we partially purified restriction endonuclease RjoI from R. josui cell extract using column chromatography. Further characterization showed that RjoI is an isoschizomer of DpnI, recognizing the sequence 5'-G^met ATC-3', where the A nucleotide is Dam-methylated. RjoI cleaved the recognition sequence between the A and T nucleotides, producing blunt ends. We then successfully introduced plasmids prepared from Escherichia coli C2925 (dam^- /dcm^- ) into R. josui by electroporation. The highest transformation efficiency of 6.6 × 10³ transformants/μg of DNA was obtained using a square-wave pulse (750 V, 1 ms). When the R. josui cel48A gene, devoid of the dockerin-encoding region, cloned into newly developed plasmid pKKM801 was introduced into R. josui, a truncated form of RjCel48A, RjCel48AΔdoc, was detected in the culture supernatant but not in the intracellular fraction. This is the first report on the establishment of fundamental technology for molecular breeding of R. josui.

A seven-gene cluster in Ruminiclostridium cellulolyticum is essential for signalization, uptake and catabolism of the degradation products of cellulose hydrolysis

BACKGROUND

Like a number of anaerobic and cellulolytic Gram-positive bacteria, the model microorganism Ruminiclostridium cellulolyticum produces extracellular multi-enzymatic complexes called cellulosomes, which efficiently degrade the crystalline cellulose. Action of the complexes on cellulose releases cellobiose and longer cellodextrins but to date, little is known about the transport and utilization of the produced cellodextrins in the bacterium. A better understanding of the uptake systems and fermentation of sugars derived from cellulose could have a major impact in the field of biofuels production.

RESULTS

We characterized a putative ABC transporter devoted to cellodextrins uptake, and a cellobiose phosphorylase (CbpA) in R. cellulolyticum. The genes encoding the components of the ABC transporter (a binding protein CuaA and two integral membrane proteins) and CbpA are expressed as a polycistronic transcriptional unit induced in the presence of cellobiose. Upstream, another polycistronic transcriptional unit encodes a two-component system (sensor and regulator), and a second binding protein CuaD, and is constitutively expressed. The products might form a three-component system inducing the expression of cuaABC and cbpA since we showed that CuaR is able to recognize the region upstream of cuaA. Biochemical analysis showed that CbpA is a strict cellobiose phosphorylase inactive on longer cellodextrins; CuaA binds to all cellodextrins (G2-G5) tested, whereas CuaD is specific to cellobiose and presents a higher affinity to this sugar. This results are in agreement with their function in transport and signalization, respectively. Characterization of a cuaD mutant, and its derivatives, indicated that the ABC transporter and CbpA are essential for growth on cellobiose and cellulose.

CONCLUSIONS

For the first time in a Gram-positive strain, we identified a three-component system and a conjugated ABC transporter/cellobiose phosphorylase system which was shown to be essential for the growth of the model cellulolytic bacterium R. cellulolyticum on cellobiose and cellulose. This efficient and energy-saving system of transport and phosphorolysis appears to be the major cellobiose utilization pathway in R. cellulolyticum, and seems well adapted to cellulolytic life-style strain. It represents a new way to enable engineered strains to utilize cellodextrins for the production of biofuels or chemicals of interest from cellulose.

Cel5I, a SLH-Containing Glycoside Hydrolase: Characterization and Investigation on Its Role in Ruminiclostridium cellulolyticum

Ruminiclostridium cellulolyticum (Clostridium cellulolyticum) is a mesophilic cellulolytic anaerobic bacterium that produces a multi-enzymatic system composed of cellulosomes and non-cellulosomal enzymes to degrade plant cell wall polysaccharides. We characterized one of the non-cellulosomal enzymes, Cel5I, composed of a Family-5 Glycoside Hydrolase catalytic module (GH5), a tandem of Family-17 and -28 Carbohydrate Binding Modules (CBM), and three S-layer homologous (SLH) modules, where the latter are expected to anchor the protein on the cell surface. Cel5I is the only putative endoglucanase targeting the cell surface as well as the only putative protein in R. cellulolyticum containing CBM17 and/or CBM28 modules. We characterized different recombinant structural variants from Cel5I. We showed that Cel5I has an affinity for insoluble cellulosic substrates through its CBMs, that it is the most active endoglucanase on crystalline cellulose of R. cellulolyticum characterized to date and mostly localized in the cell envelope of R. cellulolyticum. Its role in vivo was analyzed using a R. cellulolyticum cel5I mutant strain. Absence of Cel5I in the cell envelope did not lead to a significant variation of the phenotype compared to the wild type strain. Neither in terms of cell binding to cellulose, nor for its growth on crystalline cellulose, thus indicating that the protein has a rather subtle role in tested conditions. Cel5I might be more important in a natural environment, at low concentration of degradable glucose polymers, where its role might be to generate higher concentration of short cellodextrins close to the cell surface, facilitating their uptake or for signalization purpose.

A roadmap for gene system development in Clostridium

Clostridium species are both heroes and villains. Some cause serious human and animal diseases, those present in the gut microbiota generally contribute to health and wellbeing, while others represent useful industrial chassis for the production of chemicals and fuels. To understand, counter or exploit, there is a fundamental requirement for effective systems that may be used for directed or random genome modifications. We have formulated a simple roadmap whereby the necessary gene systems maybe developed and deployed. At its heart is the use of ‘pseudo-suicide’ vectors and the creation of a pyrE mutant (a uracil auxotroph), initially aided by ClosTron technology, but ultimately made using a special form of allelic exchange termed ACE (Allele-Coupled Exchange). All mutants, regardless of the mutagen employed, are made in this host. This is because through the use of ACE vectors, mutants can be rapidly complemented concomitant with correction of the pyrE allele and restoration of uracil prototrophy. This avoids the phenotypic effects frequently observed with high copy number plasmids and dispenses with the need to add antibiotic to ensure plasmid retention. Once available, the pyrE host may be used to stably insert all manner of application specific modules. Examples include, a sigma factor to allow deployment of a mariner transposon, hydrolases involved in biomass deconstruction and therapeutic genes in cancer delivery vehicles. To date, provided DNA transfer is obtained, we have not encountered any clostridial species where this technology cannot be applied. These include, Clostridium difficile, Clostridium acetobutylicum, Clostridium beijerinckii, Clostridium botulinum, Clostridium perfringens, Clostridium sporogenes, Clostridium pasteurianum, Clostridium ljungdahlii, Clostridium autoethanogenum and even Geobacillus thermoglucosidasius.

•

A simple roadmap for the development and deployment of gene systems in clostridia.

•

Allelic exchange using pyrE alleles and pseudo-suicide vectors.

•

Knock-out and knock-in using allele-coupled exchange (ACE).

•

Complementation studies through genome insertion.

•

Genome insertion of application specific modules.

Gas Fermentation-A Flexible Platform for Commercial Scale Production of Low-Carbon-Fuels and Chemicals from Waste and Renewable Feedstocks

There is an immediate need to drastically reduce the emissions associated with global fossil fuel consumption in order to limit climate change. However, carbon-based materials, chemicals, and transportation fuels are predominantly made from fossil sources and currently there is no alternative source available to adequately displace them. Gas-fermenting microorganisms that fix carbon dioxide (CO2) and carbon monoxide (CO) can break this dependence as they are capable of converting gaseous carbon to fuels and chemicals. As such, the technology can utilize a wide range of feedstocks including gasified organic matter of any sort (e.g., municipal solid waste, industrial waste, biomass, and agricultural waste residues) or industrial off-gases (e.g., from steel mills or processing plants). Gas fermentation has matured to the point that large-scale production of ethanol from gas has been demonstrated by two companies. This review gives an overview of the gas fermentation process, focusing specifically on anaerobic acetogens. Applications of synthetic biology and coupling gas fermentation to additional processes are discussed in detail. Both of these strategies, demonstrated at bench-scale, have abundant potential to rapidly expand the commercial product spectrum of gas fermentation and further improve efficiencies and yields.

Mechanisms involved in xyloglucan catabolism by the cellulosome-producing bacterium Ruminiclostridium cellulolyticum

Xyloglucan, a ubiquitous highly branched plant polysaccharide, was found to be rapidly degraded and metabolized by the cellulosome-producing bacterium Ruminiclostridium cellulolyticum. Our study shows that at least four cellulosomal enzymes displaying either endo- or exoxyloglucanase activities, achieve the extracellular degradation of xyloglucan into 4-glucosyl backbone xyloglucan oligosaccharides. The released oligosaccharides (composed of up to 9 monosaccharides) are subsequently imported by a highly specific ATP-binding cassette transporter (ABC-transporter), the expression of the corresponding genes being strongly induced by xyloglucan. This polysaccharide also triggers the synthesis of cytoplasmic β-galactosidase, α-xylosidase, and β-glucosidase that act sequentially to convert the imported oligosaccharides into galactose, xylose, glucose and unexpectedly cellobiose. Thus R. cellulolyticum has developed an energy-saving strategy to metabolize this hemicellulosic polysaccharide that relies on the action of the extracellular cellulosomes, a highly specialized ABC-transporter, and cytoplasmic enzymes acting in a specific order. This strategy appears to be widespread among cellulosome-producing mesophilic bacteria which display highly similar gene clusters encoding the cytosolic enzymes and the ABC-transporter.

Metabolic engineering of Clostridium cellulolyticum for the production of n-butanol from crystalline cellulose

BACKGROUND

Sustainable alternatives for the production of fuels and chemicals are needed to reduce our dependency on fossil resources and to avoid the negative impact of their excessive use on the global climate. Lignocellulosic feedstock from agricultural residues, energy crops and municipal solid waste provides an abundant and carbon-neutral alternative, but it is recalcitrant towards microbial degradation and must therefore undergo extensive pretreatment to release the monomeric sugar units used by biofuel-producing microbes. These pretreatment steps can be reduced by using microbes such as Clostridium cellulolyticum that naturally digest lignocellulose, but this limits the range of biofuels that can be produced. We therefore developed a metabolic engineering approach in C. cellulolyticum to expand its natural product spectrum and to fine tune the engineered metabolic pathways.

RESULTS

Here we report the metabolic engineering of C. cellulolyticum to produce n-butanol, a next-generation biofuel and important chemical feedstock, directly from crystalline cellulose. We introduced the CoA-dependent pathway for n-butanol synthesis from C. acetobutylicum and measured the expression of functional enzymes (using targeted proteomics) and the abundance of metabolic intermediates (by LC-MS/MS) to identify potential bottlenecks in the n-butanol biosynthesis pathway. We achieved yields of 40 and 120 mg/L n-butanol from cellobiose and crystalline cellulose, respectively, after cultivating the bacteria for 6 and 20 days.

CONCLUSION

The analysis of enzyme activities and key intracellular metabolites provides a robust framework to determine the metabolic flux through heterologous pathways in C. cellulolyticum, allowing further improvements by fine tuning individual steps to improve the yields of n-butanol.

Metabolic engineering of Clostridium cellulolyticum for the production of n-butanol from crystalline cellulose

Background

Sustainable alternatives for the production of fuels and chemicals are needed to reduce our dependency on fossil resources and to avoid the negative impact of their excessive use on the global climate. Lignocellulosic feedstock from agricultural residues, energy crops and municipal solid waste provides an abundant and carbon-neutral alternative, but it is recalcitrant towards microbial degradation and must therefore undergo extensive pretreatment to release the monomeric sugar units used by biofuel-producing microbes. These pretreatment steps can be reduced by using microbes such as Clostridium cellulolyticum that naturally digest lignocellulose, but this limits the range of biofuels that can be produced. We therefore developed a metabolic engineering approach in C. cellulolyticum to expand its natural product spectrum and to fine tune the engineered metabolic pathways.

Results

Here we report the metabolic engineering of C. cellulolyticum to produce n-butanol, a next-generation biofuel and important chemical feedstock, directly from crystalline cellulose. We introduced the CoA-dependent pathway for n-butanol synthesis from C. acetobutylicum and measured the expression of functional enzymes (using targeted proteomics) and the abundance of metabolic intermediates (by LC-MS/MS) to identify potential bottlenecks in the n-butanol biosynthesis pathway. We achieved yields of 40 and 120 mg/L n-butanol from cellobiose and crystalline cellulose, respectively, after cultivating the bacteria for 6 and 20 days.

Conclusion

The analysis of enzyme activities and key intracellular metabolites provides a robust framework to determine the metabolic flux through heterologous pathways in C. cellulolyticum, allowing further improvements by fine tuning individual steps to improve the yields of n-butanol.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0406-2) contains supplementary material, which is available to authorized users.

Restriction modification system analysis and development of in vivo methylation for the transformation of Clostridium cellulovorans

Clostridium cellulovorans, a cellulolytic bacterium producing butyric and acetic acids as main fermentation products, is a promising host for biofuel production from cellulose. However, the transformation method of C. cellulovorans was not available, hindering its genetic engineering. To overcome this problem, its restriction modification (RM) systems were analyzed and a novel in vivo methylation was established for its successful transformation in the present study. Specifically, two RM systems, Cce743I and Cce743II, were determined. R. Cce743I has the same specificity as LlaJI, recognizing 5'-GACGC-3' and 5'-GCGTC-3', while M. Cce743I methylates the external cytosine in the strand (5'-GACG(m)C-3'). R. Cce743II, has the same specificity as LlaI, recognizing 5'-CCAGG-3' and 5'-CCTGG-3', while M. Cce743II methylates the external cytosine of both strands. An in vivo methylation system, expressing M. Cce743I and M. Cce743II from C. cellulovorans in Escherichia coli, was then established to protect plasmids used in electrotransformation. Transformants expressing an aldehyde/alcohol dehydrogenase (adhE2), which converted butyryl-CoA to n-butanol and acetyl-CoA to ethanol, were obtained. For the first time, an effective transformation method was developed for metabolic engineering of C. cellulovorans for biofuel production directly from cellulose.

Metabolic and process engineering of Clostridium cellulovorans for biofuel production from cellulose

Production of cellulosic biofuels has drawn increasing attention. However, currently no microorganism can produce biofuels, particularly butanol, directly from cellulosic biomass efficiently. Here we engineered a cellulolytic bacterium, Clostridium cellulovorans, for n-butanol and ethanol production directly from cellulose by introducing an aldehyde/alcohol dehydrogenase (adhE2), which converts butyryl-CoA to n-butanol and acetyl-CoA to ethanol. The engineered strain was able to produce 1.42 g/L n-butanol and 1.60 g/L ethanol directly from cellulose. Moreover, the addition of methyl viologen as an artificial electron carrier shifted the metabolic flux from acid production to alcohol production, resulting in a high biofuel yield of 0.39 g/g from cellulose, comparable to ethanol yield from corn dextrose by yeast fermentation. This study is the first metabolic engineering of C. cellulovorans for n-butanol and ethanol production directly from cellulose with significant titers and yields, providing a promising consolidated bioprocessing (CBP) platform for biofuel production from cellulosic biomass.

Cellulosome stoichiometry in Clostridium cellulolyticum is regulated by selective RNA processing and stabilization

The mechanism, physiological relevance and evolutionary implication of selective RNA processing and stabilization (SRPS) remain elusive. Here we report the genome-wide maps of transcriptional start sites (TSs) and post-transcriptional processed sites (PSs) for Clostridium cellulolyticum. The PS-associated genes are preferably associated with subunits of heteromultimeric protein complexes, and the intergenic PSs (iPSs) are enriched in operons exhibiting highly skewed transcript-abundance landscape. Stem-loop structures associated with those iPSs located at 3′ termini of highly transcribed genes exhibit folding free energy negatively correlated with transcript-abundance ratio of flanking genes. In the cellulosome-encoding cip-cel operon, iPSs and stem-loops precisely regulate structure and abundance of the subunit-encoding transcripts processed from a primary polycistronic RNA, quantitatively specifying cellulosome stoichiometry. Moreover, cellulosome evolution is shaped by the number, position and biophysical nature of TSs, iPSs and stem-loops. Our findings unveil a genome-wide RNA-encoded strategy controlling in vivo stoichiometry of protein complexes.

Selective RNA processing and stabilization (SRPS) can regulate bacterial operons, but the process is not well understood. Here, the authors show that the stoichiometry of cellulosome, a 12-subunit protein complex expressed from an operon in Gram-positive Clostridium cellullolyticum, is regulated by SRPS.

Low-Carbon Fuel and Chemical Production by Anaerobic Gas Fermentation

World energy demand is expected to increase by up to 40% by 2035. Over this period, the global population is also expected to increase by a billion people. A challenge facing the global community is not only to increase the supply of fuel, but also to minimize fossil carbon emissions to safeguard the environment, at the same time as ensuring that food production and supply is not detrimentally impacted. Gas fermentation is a rapidly maturing technology which allows low carbon fuel and commodity chemical synthesis. Unlike traditional biofuel technologies, gas fermentation avoids the use of sugars, relying instead on gas streams rich in carbon monoxide and/or hydrogen and carbon dioxide as sources of carbon and energy for product synthesis by specialized bacteria collectively known as acetogens. Thus, gas fermentation enables access to a diverse array of novel, large volume, and globally available feedstocks including industrial waste gases and syngas produced, for example, via the gasification of municipal waste and biomass. Through the efforts of academic labs and early stage ventures, process scale-up challenges have been surmounted through the development of specialized bioreactors. Furthermore, tools for the genetic improvement of the acetogenic bacteria have been reported, paving the way for the production of a spectrum of ever-more valuable products via this process. As a result of these developments, interest in gas fermentation among both researchers and legislators has grown significantly in the past 5 years to the point that this approach is now considered amongst the mainstream of emerging technology solutions for near-term low-carbon fuel and chemical synthesis.

Xylanase and cellulase systems of Clostridium sp.: an insight on molecular approaches for strain improvement

Bioethanol and biobutanol hold great promise as alternative biofuels, especially for transport sector, because they can be produced from lignocellulosic agro-industrial residues. From techno-economic point of view, the bioprocess for biofuels production should involve minimal processing steps. Consolidated bioprocessing (CBP), which combines various processing steps such as pretreatment, hydrolysis and fermentation in a single bioreactor, could be of great relevance for the production of bioethanol and biobutanol or solvents (acetone, butanol, ethanol), employing clostridia. For CBP, Clostridium holds best promise because it possesses multi-enzyme system involving cellulosome and xylanosome, which comprise several enzymes such as cellulases and xylanases. The aim of this article was to review the recent developments on enzyme systems of clostridia, especially xylanase and cellulase with an effort to analyse the information available on molecular approaches for the improvement of strains with ultimate aim to improve the efficiencies of hydrolysis and fermentation.

Expansion of the genetic toolkit for metabolic engineering of Clostridium pasteurianum: chromosomal gene disruption of the endogenous CpaAI restriction enzyme

BACKGROUND

Clostridium pasteurianum is one of the most promising biofuel producers within the genus Clostridium owing to its unique metabolic ability to ferment glycerol into butanol. Although an efficient means is available for introducing foreign DNA to C. pasteurianum, major genetic tools, such as gene knockout, knockdown, or genome editing, are lacking, preventing metabolic engineering of C. pasteurianum.

RESULTS

Here we present a methodology for performing chromosomal gene disruption in C. pasteurianum using the programmable lactococcus Ll.ltrB group II intron. Gene disruption was initially found to be impeded by inefficient electrotransformation of Escherichia coli-C. pasteurianum shuttle vectors, presumably due to host restriction. By assessing the ability of various vector deletion derivatives to electrotransform C. pasteurianum and probing the microorganism's methylome using next-generation sequence data, we identified a new C. pasteurianum Type I restriction-methylation system, CpaAII, with a predicted recognition sequence of 5'-AAGNNNNNCTCC-3' (N = A, C, G, or T). Following rescue of high-level electrotransformation via mutation of the sole CpaAII site within the shuttle vectors, we retargeted the intron to the cpaAIR gene encoding the CpaAI Type II restriction endonuclease (recognition site of 5'-CGCG-3'). Intron insertion was potentially hindered by low retrohoming efficiency, yet this limitation could be overcome by a procedure for enrichment of the intron insertion. The resulting ΔcpaAIR mutant strain was efficiently electrotransformed with M.FnuDII-unmethylated plasmid DNA.

CONCLUSIONS

The markerless and plasmidless ΔcpaAIR mutant strain of C. pasteurianum developed in this study can serve as a general host strain for future genetic and metabolic manipulation. Further, the associated gene disruption protocol should not only serve as a guide for chromosomal gene inactivation studies involving mobile group II introns, but also prove invaluable for applying metabolic engineering strategies to C. pasteurianum.

Recent progress in engineering human-associated microbiomes

Recent progress in molecular biology and genetics opens up the possibility of engineering a variety of biological systems, from single-cellular to multicellular organisms. The consortia of microbes that reside on the human body, the human-associated microbiota, are particularly interesting as targets for forward engineering and manipulation due to their relevance in health and disease. New technologies in analysis and perturbation of the human microbiota will lead to better diagnostic and therapeutic strategies against diseases of microbial origin or pathogenesis. Here, we discuss recent advances that are bringing us closer to realizing the true potential of an engineered human-associated microbial community.

Are cellulosome scaffolding protein CipC and CBM3-containing protein HycP, involved in adherence of Clostridium cellulolyticum to cellulose?

Clostridium cellulolyticum, a mesophilic anaerobic bacterium, produces highly active enzymatic complexes called cellulosomes. This strain was already shown to bind to cellulose, however the molecular mechanism(s) involved is not known. In this context we focused on the gene named hycP, encoding a 250-kDa protein of unknown function, containing a Family-3 Carbohydrate Binding Module (CBM3) along with 23 hyaline repeat modules (HYR modules). In the microbial kingdom the gene hycP is only found in C. cellulolyticum and the very close strain recently sequenced Clostridium sp BNL1100. Its presence in C. cellulolyticum guided us to analyze its function and its putative role in adhesion of the cells to cellulose. The CBM3 of HycP was shown to bind to crystalline cellulose and was assigned to the CBM3b subfamily. No hydrolytic activity on cellulose was found with a mini-protein displaying representative domains of HycP. A C. cellulolyticum inactivated hycP mutant strain was constructed, and we found that HycP is neither involved in binding of the cells to cellulose nor that the protein has an obvious role in cell growth on cellulose. We also characterized the role of the cellulosome scaffolding protein CipC in adhesion of C. cellulolyticum to cellulose, since cellulosome scaffolding protein has been proposed to mediate binding of other cellulolytic bacteria to cellulose. A second mutant was constructed, where cipC was inactivated. We unexpectedly found that CipC is only partly involved in binding of C. cellulolyticum to cellulose. Other mechanisms for cellulose adhesion may therefore exist in C. cellulolyticum. In addition, no cellulosomal protuberances were observed at the cellular surface of C. cellulolyticum, what is in contrast to reports from several other cellulosomes producing strains. These findings may suggest that C. cellulolyticum has no dedicated molecular mechanism to aggregate the cellulosomes at the cellular surface.

Construction of a stable replicating shuttle vector for Caldicellulosiruptor species: use for extending genetic methodologies to other members of this genus

The recalcitrance of plant biomass is the most important barrier to its economic conversion by microbes to products of interest. Thermophiles have special advantages for biomass conversion and members of the genus Caldicellulosiruptor are the most thermophilic cellulolytic microbes known. In this study, we report the construction of a replicating shuttle vector for Caldicellulosiruptor species based on pBAS2, the smaller of two native C. bescii plasmids. The entire plasmid was cloned into an E. coli cloning vector containing a pSC101 origin of replication and an apramycin resistance cassette for selection in E. coli. The wild-type C. bescii pyrF locus was cloned under the transcriptional control of the regulatory region of the ribosomal protein S30EA (Cbes2105), and the resulting vector was transformed into a new spontaneous deletion mutant in the pyrFA locus of C. bescii that allowed complementation with the pyrF gene alone. Plasmid DNA was methylated in vitro with a recently described cognate methyltransferase, M.CbeI, and transformants were selected for uracil prototrophy. The plasmid was stably maintained in low copy with selection but rapidly lost without selection. There was no evidence of DNA rearrangement during transformation and replication in C. bescii. A similar approach was used to screen for transformability of other members of this genus using M.CbeI to overcome restriction as a barrier and was successful for transformation of C. hydrothermalis, an attractive species for many applications. Plasmids containing a carbohydrate binding domain (CBM) and linker region from the C. bescii celA gene were maintained with selection and were structurally stable through transformation and replication in C. bescii and E. coli.

Development of an electrotransformation protocol for genetic manipulation of Clostridium pasteurianum

BACKGROUND

Reducing the production cost of, and increasing revenues from, industrial biofuels will greatly facilitate their proliferation and co-integration with fossil fuels. The cost of feedstock is the largest cost in most fermentation bioprocesses and therefore represents an important target for cost reduction. Meanwhile, the biorefinery concept advocates revenue growth through complete utilization of by-products generated during biofuel production. Taken together, the production of biofuels from low-cost crude glycerol, available in oversupply as a by-product of bioethanol production, in the form of thin stillage, and biodiesel production, embodies a remarkable opportunity to advance affordable biofuel development. However, few bacterial species possess the natural capacity to convert glycerol as a sole source of carbon and energy into value-added bioproducts. Of particular interest is the anaerobe Clostridium pasteurianum, the only microorganism known to convert glycerol alone directly into butanol, which currently holds immense promise as a high-energy biofuel and bulk chemical. Unfortunately, genetic and metabolic engineering of C. pasteurianum has been fundamentally impeded due to lack of an efficient method for deoxyribonucleic acid (DNA) transfer.

RESULTS

This work reports the development of an electrotransformation protocol permitting high-level DNA transfer to C. pasteurianum ATCC 6013 together with accompanying selection markers and vector components. The CpaAI restriction-modification system was found to be a major barrier to DNA delivery into C. pasteurianum which we overcame by in vivo methylation of the recognition site (5'-CGCG-3') using the M.FnuDII methyltransferase. With proper selection of the replication origin and antibiotic-resistance marker, we initially electroporated methylated DNA into C. pasteurianum at a low efficiency of 2.4 × 101 transformants μg-1 DNA by utilizing conditions common to other clostridial electroporations. Systematic investigation of various parameters involved in the cell growth, washing and pulse delivery, and outgrowth phases of the electrotransformation procedure significantly elevated the electrotransformation efficiency, up to 7.5 × 104 transformants μg-1 DNA, an increase of approximately three order of magnitude. Key factors affecting the electrotransformation efficiency include cell-wall-weakening using glycine, ethanol-mediated membrane solubilization, field strength of the electric pulse, and sucrose osmoprotection.

CONCLUSIONS

C. pasteurianum ATCC 6013 can be electrotransformed at a high efficiency using appropriately methylated plasmid DNA. The electrotransformation method and tools reported here should promote extensive genetic manipulation and metabolic engineering of this biotechnologically important bacterium.