Intermolecular disulfide bonds: an important structural feature of the polyoma virus capsid

Fate of the Urinary Tract Virus BK Human Polyomavirus in Source-Separated Urine

Human polyomaviruses are emerging pathogens that infect a large percentage of the human population and are excreted in urine. Consequently, urine that is collected for fertilizer production often has high concentrations of polyomavirus genes. We studied the fate of infectious double-stranded DNA (dsDNA) BK human polyomavirus (BKPyV) in hydrolyzed source-separated urine with infectivity assays and quantitative PCR (qPCR). Although BKPyV genomes persisted in the hydrolyzed urine for long periods of time (T90 [time required for 90% reduction in infectivity or gene copies] of >3 weeks), the viruses were rapidly inactivated (T90 of 1.1 to 11 h) in most of the tested urine samples. Interestingly, the infectivity of dsDNA bacteriophage surrogate T3 (T90 of 24 to 46 days) was much more persistent than that of BKPyV, highlighting a major shortcoming of using bacteriophages as human virus surrogates. Pasteurization and filtration experiments suggest that BKPyV virus inactivation was due to microorganism activity in the source-separated urine, and SDS-PAGE Western blots showed that BKPyV protein capsid disassembly is concurrent with inactivation. Our results imply that stored urine does not pose a substantial risk of BKPyV transmission, that qPCR and infectivity of the dsDNA surrogate do not accurately depict BKPyV fate, and that microbial inactivation is driven by structural elements of the BKPyV capsid.IMPORTANCE We demonstrate that a common urinary tract virus has a high susceptibility to the conditions in hydrolyzed urine and consequently would not be a substantial exposure route to humans using urine-derived fertilizers. The results have significant implications for understanding virus fate. First, by demonstrating that the dsDNA (double-stranded DNA) genome of the polyomavirus lasts for weeks despite infectivity lasting for hours to days, our work highlights the shortcomings of using qPCR to estimate risks from unculturable viruses. Second, commonly used dsDNA surrogate viruses survived for weeks under the same conditions that BK polyomavirus survived for only hours, highlighting issues with using virus surrogates to predict how human viruses will behave in the environment. Finally, our mechanistic inactivation analysis provides strong evidence that microbial activity drives rapid virus inactivation, likely through capsid disassembly. Overall, our work underlines how subtle structural differences between viruses can greatly impact their environmental fate.

Epigenetic Analysis of SV40 Minichromosomes

Simian virus 40 (SV40) is one of the best-characterized members of the polyomavirus family of small DNA tumor viruses. It has a small genome of 5243 bp and utilizes cellular proteins for its molecular biology, with the exception of the T-antigen protein, which is coded by the virus and is involved in regulating transcription and directing replication. Importantly, SV40 exists as chromatin in both the virus particle and intracellular minichromosomes. These facts, combined with high yields of virus and minichromosomes following infection and ease of manipulation, have made SV40 an extremely useful model to study all aspects of eukaryotic molecular biology. This unit describes procedures for working with SV40 and preparing SV40 chromatin from infected cells and virus particles, as well as procedures for using SV40 chromatin to study epigenetic regulation. © 2017 by John Wiley & Sons, Inc.

Disulfide bond formation contributes to herpes simplex virus capsid stability and retention of pentons

Disulfide bonds reportedly stabilize the capsids of several viruses, including papillomavirus, polyomavirus, and simian virus 40, and have been detected in herpes simplex virus (HSV) capsids. In this study, we show that in mature HSV-1 virions, capsid proteins VP5, VP23, VP19C, UL17, and UL25 participate in covalent cross-links, and that these are susceptible to dithiothreitol (DTT). In addition, several tegument proteins were found in high-molecular-weight complexes, including VP22, UL36, and UL37. Cross-linked capsid complexes can be detected in virions isolated in the presence and absence of N-ethylmaleimide (NEM), a chemical that reacts irreversibly with free cysteines to block disulfide formation. Intracellular capsids isolated in the absence of NEM contain disulfide cross-linked species; however, intracellular capsids isolated from cells pretreated with NEM did not. Thus, the free cysteines in intracellular capsids appear to be positioned such that disulfide bond formation can occur readily if they are exposed to an oxidizing environment. These results indicate that disulfide cross-links are normally present in extracellular virions but not in intracellular capsids. Interestingly, intracellular capsids isolated in the presence of NEM are unstable; B and C capsids are converted to a novel form that resembles A capsids, indicating that scaffold and DNA are lost. Furthermore, these capsids also have lost pentons and peripentonal triplexes as visualized by cryoelectron microscopy. These data indicate that capsid stability, and especially the retention of pentons, is regulated by the formation of disulfide bonds in the capsid.

Disulfide bond formation in the herpes simplex virus 1 UL6 protein is required for portal ring formation and genome encapsidation

The herpes simplex virus 1 (HSV-1) UL6 portal protein forms a 12-subunit ring structure at a unique capsid vertex which functions as a conduit for the encapsidation of the viral genome. We have demonstrated previously that the leucine zipper region of UL6 is important for intersubunit interactions and stable ring formation (J. K. Nellissery, R. Szczepaniak, C. Lamberti, and S. K. Weller, J. Virol. 81:8868-8877, 2007). We now demonstrate that intersubunit disulfide bonds exist between monomeric subunits and contribute to portal ring formation and/or stability. Intersubunit disulfide bonds were detected in purified portal rings by SDS-PAGE under nonreducing conditions. Furthermore, the treatment of purified portal rings with dithiothreitol (DTT) resulted in the disruption of the rings, suggesting that disulfide bonds confer stability to this complex structure. The UL6 protein contains nine cysteines that were individually mutated to alanine. Two of these mutants, C166A and C254A, failed to complement a UL6 null mutant in a transient complementation assay. Furthermore, viral mutants bearing the C166A and C254A mutations failed to produce infectious progeny and were unable to cleave or package viral DNA. In cells infected with C166A or C254A, B capsids were produced which contained UL6 at reduced levels compared to those seen in wild-type capsids. In addition, C166A and C254A mutant proteins expressed in insect cells infected with recombinant baculovirus failed to form ring structures. Cysteines at positions 166 and 254 thus appear to be required for intersubunit disulfide bond formation. Taken together, these results indicate that disulfide bond formation is required for portal ring formation and/or stability and for the production of procapsids that are capable of encapsidation.

Hamster polyomavirus-derived virus-like particles are able to transfer in vitro encapsidated plasmid DNA to mammalian cells

The authentic major capsid protein 1 (VP1) of hamster polyomavirus (HaPyV) consists of 384 amino acid (aa) residues (42 kDa). Expression from an additional in-frame initiation codon located upstream from the authentic VP1 open reading frame (at position -4) might result in the synthesis of a 388 aa-long, amino-terminally extended VP1 (aa -4 to aa 384; VP1(ext)). In a plasmid-mediated Drosophila Schneider (S2) cell expression system, both VP1 derivatives as well as a VP1(ext) variant with an amino acid exchange of the authentic Met1Gly (VP1(ext-M1)) were expressed to a similar high level. Although all three proteins were detected in nuclear as well as cytoplasmic fractions, formation of virus-like particles (VLPs) was observed exclusively in the nucleus as confirmed by negative staining electron microscopy. The use of a tryptophan promoter-driven Escherichia coli expression system resulted in the efficient synthesis of VP1 and VP1(ext) and formation of VLPs. In addition, establishment of an in vitro disassembly/reassembly system allowed the encapsidation of plasmid DNA into VLPs. Encapsidated DNA was found to be protected against the action of DNase I. Mammalian COS-7 and CHO cells were transfected with HaPyV-VP1-VLPs carrying a plasmid encoding enhanced green fluorescent protein (eGFP). In both cell lines eGFP expression was detected indicating successful transfer of the plasmid into the cells, though at a still low level. Cesium chloride gradient centrifugation allowed the separation of VLPs with encapsidated DNA from "empty" VLPs, which might be useful for further optimization of transfection. Therefore, heterologously expressed HaPyV-VP1 may represent a promising alternative carrier for foreign DNA in gene transfer applications.

Structure and assembly of a T=1 virus-like particle in BK polyomavirus

In polyomaviruses the pentameric capsomers are interlinked by the long C-terminal arm of the structural protein VP1. The T=7 icosahedral structure of these viruses is possible due to an intriguing adaptability of this linker arm to the different local environments in the capsid. To explore the assembly process, we have compared the structure of two virus-like particles (VLPs) formed, as we found, in a calcium-dependent manner by the VP1 protein of human polyomavirus BK. The structures were determined using electron cryomicroscopy (cryo-EM), and the three-dimensional reconstructions were interpreted by atomic modeling. In the small VP1 particle, 26.4 nm in diameter, the pentameric capsomers form an icosahedral T=1 surface lattice with meeting densities at the threefold axes that interlinked three capsomers. In the larger particle, 50.6 nm in diameter, the capsomers form a T=7 icosahedral shell with three unique contacts. A folding model of the BKV VP1 protein was obtained by alignment with the VP1 protein of simian virus 40 (SV40). The model fitted well into the cryo-EM density of the T=7 particle. However, residues 297 to 362 of the C-terminal arm had to be remodeled to accommodate the higher curvature of the T=1 particle. The loops, before and after the C-terminal short helix, were shown to provide the hinges that allowed curvature variation in the particle shell. The meeting densities seen at the threefold axes in the T=1 particle were consistent with the triple-helix interlinking contact at the local threefold axes in the T=7 structure.

Disulfide bonds stabilize JC virus capsid-like structure by protecting calcium ions from chelation

To investigate the role of disulfide bonds in the capsid structure, a recombinant JC virus-like particle (VLP) was used. The major capsid protein, VP1, of the JC virus was expressed in yeast cells. The yeast-expressed VP1 was self-assembled into a VLP. Disulfide bonds were found in the VLP which caused dimeric and trimeric VP1 linkages as demonstrated by non-reducing SDS-PAGE. The VLP remained intact when disulfide bonds were reduced by dithiothreitol. The VLP without disulfide bonds could be disassembled into capsomeres by EGTA alone, but those with disulfide bonds could not be disassembled by EGTA. Capsomeres were reassembled into VLPs in the presence of calcium ions. Capsomeres formed irregular aggregations instead of VLPs when treated with diamide to reconstitute the disulfide bonds. These results indicate that disulfide bonds play an important role in maintaining the integrity of the JC VLP by protecting calcium ions from chelation.

Role of simian virus 40 Vp1 cysteines in virion infectivity

We have developed a new nonoverlapping infectious viral genome (NO-SV40) in order to facilitate structure-based analysis of the simian virus 40 (SV40) life cycle. We first tested the role of cysteine residues in the formation of infectious virions by individually mutating the seven cysteines in the major capsid protein, Vp1. All seven cysteine mutants-C9A, C49A, C87A, C104A, C207S, C254A, and C267L-retained viability. In the crystal structure of SV40, disulfide bridges are formed between certain Cys104 residues on neighboring pentamers. However, our results show that none of these disulfide bonds are required for virion infectivity in culture. We also introduced five different mutations into Cys254, the most strictly conserved cysteine across the polyomavirus family. We found that C254L, C254S, C254G, C254Q, and C254R mutants all showed greatly reduced (around 100,000-fold) plaque-forming ability. These mutants had no apparent defect in viral DNA replication. Mutant Vp1's, as well as wild-type Vp2/3, were mostly localized in the nucleus. Further analysis of the C254L mutant revealed that the mutant Vp1 was able to form pentamers in vitro. DNase I-resistant virion-like particles were present in NO-SV40-C254L-transfected cell lysate, but at about 1/18 the amount in wild-type-transfected lysate. An examination of the three-dimensional structure reveals that Cys254 is buried near the surface of Vp1, so that it cannot form disulfide bonds, and is not involved in intrapentamer interactions, consistent with the normal pentamer formation by the C254L mutant. It is, however, located at a critical junction between three pentamers, on a conserved loop (G2H) that packs against the dual interpentamer Ca(2+)-binding sites and the invading C-terminal helix of an adjacent pentamer. The substitution by the larger side chains is predicted to cause a localized shift in the G2H loop, which may disrupt Ca(2+) ion coordination and the packing of the invading helix, consistent with the defect in virion assembly. Our experimental system thus allows dissection of structure-function relationships during the distinct steps of the SV40 life cycle.

Solution structure and dynamics of the Rous sarcoma virus capsid protein and comparison with capsid proteins of other retroviruses

The solution structure and dynamics of the recombinant 240 amino acid residue capsid protein from the Rous sarcoma virus has been determined by NMR methods. The structure was determined using 2200 distance restraints and 330 torsion angle restraints, and the dynamics analysis was based on (15)N relaxation parameters (R(1), R(2), and (1)H-(15)N NOE) measured for 153 backbone amide groups. The monomeric protein consists of independently folded N- and C-terminal domains that comprise residues Leu14-Leu146 and Ala150-Gln226, respectively. The domains exhibit different rotational correlation times (16.6(+/-0.1) ns and 12.6(+/-0.1) ns, respectively), are connected by a flexible linker (Ala147-Pro149), and do not give rise to inter-domain NOE values, indicating that they are dynamically independent. Despite limited sequence similarity, the structure of the Rous sarcoma virus capsid protein is similar to the structures determined recently for the capsid proteins of retroviruses belonging to the lentivirus and human T-cell leukemia virus/bovine leukemia virus genera. Structural differences that exist in the C-terminal domain of Rous sarcoma virus capsid relative to the other capsid proteins appear to be related to the occurrence of conserved cysteine residues. Whereas most genera of retroviruses contain a pair of conserved and essential cysteine residues in the C-terminal domain that appear to function by forming an intramolecular disulfide bond during assembly, the Rous sarcoma virus capsid protein does not. Instead, the Rous sarcoma virus capsid protein contains a single cysteine residue that appears to be conserved among the avian C-type retroviruses and is positioned in a manner that might allow the formation of an intermolecular disulfide bond during capsid assembly.

Cys9, Cys104 and Cys207 of simian virus 40 Vp1 are essential for inter-pentamer disulfide-linkage and stabilization in cell-free lysates

Previous studies have implicated disulfide bonds between Vp1 molecules in the stabilization of the simian virus 40 (SV40) capsid. To identify the cysteine residues involved in intermolecular disulfide interactions, systematic oligo-directed mutagenesis of cysteine codons to serine codons was initiated. Wild-type and mutant Vp1 proteins were produced in rabbit reticulocyte lysates and were allowed to interact post-translationally. Disulfide-linked Vp1 complexes were assessed via non-reducing SDS-PAGE and via sucrose-gradient sedimentation. Wild-type Vp1 forms 7S pentamers followed by 12S disulfide-linked multi-pentameric complexes in cell-free lysates. Mutagenesis of all seven cysteine codons abolished Vp1 12S complexes, but did not affect pentamer formation. A quadruple Vp1 mutant at Cys49, Cys87, Cys254 and Cys267 continued to form 12S complexes, whereas the major products of the Cys9, Cys104 and Cys207 triple mutant Vp1 were 7S pentamers. Single and double mutant Vp1 proteins at the three cysteines affected continued to form 12S complexes, but to a lesser extent. Thus, inter-pentamer disulfide bonds at Cys9, Cys104 and Cys207 are essential and sufficient for stabilization of Vp1 complexes in cell-free lysates. These results are in agreement with previous structural studies of SV40 that implicated the same three residues in disulfide linkage in the capsid. Possible parameters for the involvement of the three cysteines are discussed.

Solution structure of the capsid protein from the human T-cell leukemia virus type-I

The solution structure of the capsid protein (CA) from the human T-cell leukemia virus type one (HTLV-I), a retrovirus that causes T-cell leukemia and HTLV-I-associated myelopathy in humans, has been determined by NMR methods. The protein consists of independent N and C-terminal domains connected by a flexible linker. The domains are structurally similar to the N-terminal "core" and C-terminal "dimerization" domains, respectively, of the human immunodeficiency virus type one (HIV-1) and equine infectious anemia virus (EIAV) capsid proteins, although several important differences exist. In particular, hydrophobic residues near the major homology region are partially buried in HTLV-I CA, which is monomeric in solution, whereas analogous residues in HIV-1 and EIAV CA project from the C-terminal domain and promote dimerization. These differences in the structure and oligomerization state of the proteins appear to be related to, and possibly controlled by, the oxidation state of conserved cysteine residues, which are reduced in HTLV-I CA but form a disulfide bond in the HIV-1 and EIAV CA crystal structures. The results are consistent with an oxidative capsid assembly mechanism, in which CA oligomerization or maturation is triggered by disulfide bo nd formation as the budding virus enters the oxidizing environment of the bloodstream.

Papillomavirus assembly requires trimerization of the major capsid protein by disulfides between two highly conserved cysteines

We have used viruslike particles (VLPs) of human papillomaviruses to study the structure and assembly of the viral capsid. We demonstrate that mutation of either of two highly conserved cysteines of the major capsid protein L1 to serine completely prevents the assembly of VLPs but not of capsomers, whereas mutation of all other cysteines leaves VLP assembly unaffected. These two cysteines form intercapsomeric disulfides yielding an L1 trimer. Trimerization comprises about half of the L1 molecules in VLPs but all L1 molecules in complete virions. We suggest that trimerization of L1 is indispensable for the stabilization of intercapsomeric contacts in papillomavirus capsids.

Intercapsomeric disulfide bonds in papillomavirus assembly and disassembly

In order to analyze bonding contacts that stabilize the virion or promote capsid assembly, bovine papillomavirus (BPV) virions were subjected to buffer conditions known to disrupt polyomavirus virions. At physiologic ionic strength, incubation with dithiothreitol (DTT), EGTA, or DTT plus EGTA did not disrupt BPV virions as determined by electron microscopy. However, incubation of virions with DTT rendered the BPV L1 protein susceptible to trypsin cleavage at its carboxy terminus and rendered the genome susceptible to digestion with DNase I. When DTT-treated BPV virions were analyzed by analytical ultracentrifugation, they sedimented at 230S compared with 273S for untreated virions, suggesting a capsid shell expansion. Incubation with EGTA had no effect on trypsin or DNase I sensitivity and only a small effect upon the virion S value. A single cysteine residue conserved among BPV and human papillomavirus (HPV) L1 proteins resides within the trypsin-sensitive carboxy terminus of L1, which is required for capsid assembly. A recombinant HPV type 11 L1 protein, which was purified after expression in Escherichia coli and which has a Cys-to-Gly change at this position (Cys424), formed pentamers; however, unlike the wild-type protein, these mutant pentamers could no longer assemble in vitro into capsid-like structures. These results indicate an important role for interpentamer disulfide bonds in papillomavirus capsid assembly and disassembly and suggest a mechanism of virus uncoating in the reducing environment of the cytoplasm.

Quantitative disassembly and reassembly of human papillomavirus type 11 viruslike particles in vitro

The human papillomavirus (HPV) capsid is primarily composed of a structural protein denoted L1, which forms both pentameric capsomeres and capsids composed of 72 capsomeres. The L1 protein alone is capable of self-assembly in vivo into capsidlike structures referred to as viruslike particles (VLPs). We have determined conditions for the quantitative disassembly of purified HPV-11 L1 VLPs to the level of capsomeres, demonstrating that disulfide bonds alone are essential to maintaining long-term HPV-11 L1 VLP structure at physiological ionic strength. The ionic strength of the disassembly reaction was also important, as increased NaCl concentrations inhibited disassembly. Conversely, chelation of cations had no effect on disassembly. Quantitative reassembly to a homogeneous population of 55-nm, 150S VLPs was reliably achieved by the re-formation of disulfide linkages following removal of reducing agent at near-neutral pH and moderate NaCl concentration. HPV-11 L1 VLPs could also be dissociated by treatment with carbonate buffer at pH 9.6, but VLPs could not be regenerated following carbonate treatment. When probed with conformationally sensitive and/or neutralizing monoclonal antibodies, both capsomeres generated by disulfide reduction of purified VLPs and reassembled VLPs formed from capsomeres upon removal of reducing agents exhibited epitopes found on the surface of authentic HPV-11 virions. Antisera raised against either purified VLP starting material or reassembled VLPs similarly neutralized infectious HPV-11 virions. The ability to disassemble and reassemble VLPs in vitro and in bulk allows basic features of capsid assembly to be studied and also opens the possibility of packaging selected exogenous compounds within the reassembled VLPs.

The structure of simian virus 40 refined at 3.1 A resolution

BACKGROUND

The structure of simian virus 40 (SV40), previously determined at 3.8 degree resolution, shows how its pentameric VP1 assembly units are tied together by extended C-terminal arms. In order to define more precisely the possible assembly mechanisms, we have refined the structure at 3.1 degree resolution.

RESULTS

New data from a high-intensity synchrotron source have been used for phase extension by electron-density averaging and refinement, exploiting only the strict 5-fold non-crystallographic symmetry for the real-space averaging steps. The accurate model enables us to study important structural features of the virus particle in detail. The remarkably invariant core of the VP1 pentamer bears the docking sites for the C-terminal arms from other pentamers. These contacts are the principal way in which pentameric assembly units are linked together in the capsid. Only at the interface between five-coordinated and six-coordinated pentamers do the pentamer cores appear to interact strongly. There are two cation-binding sites per VP1 monomer, seen in a soaking experiment with gadolinium nitrate. These sites are quite close to each other at the interfaces between pentamers.

CONCLUSION

We propose that the contact between five-coordinated and six-coordinated pentamers may help to generate a six-pentamer nucleus, with which further pentamers can assemble to generate the complete particle. Calcium ions probably stabilize the structure of the assembled particle, rather than direct its assembly.

Expression of the polyomavirus minor capsid proteins VP2 and VP3 in Escherichia coli: in vitro interactions with recombinant VP1 capsomeres

The polyomavirus VP2 and VP3 capsid proteins were expressed in Escherichia coli. The majority of the expressed proteins were in an insoluble fraction, and they were extracted and initially purified in 8 M urea before renaturation. Soluble VP2 and VP3 were mixed with purified recombinant VP1 capsomeres, and their interactions were assayed by immunoprecipitation and ion-exchange chromatography. Coimmunoprecipitation could be demonstrated with antibodies to either VP1 or VP2/VP3. Mixing recombinant VP1 with VP2 and VP3 modified the recognition of VP1 by domain-specific antipeptide antibodies and altered the chromatographic behavior of the individual proteins. Similar results were observed when a truncated VP1 protein, delta NCOVP1, with 62 amino acids deleted from the carboxy terminus was mixed with VP2/VP3. After the mixing, equilibrium dissociation constants for their binding to either VP1 or delta NCOVP1 were determined to be 0.37 +/- 0.23 microM for VP2 and 0.18 +/- 0.21 microM for VP3. These studies demonstrate that the recombinant VP2 and VP3 proteins interact with VP1 to affect the biochemical properties of VP1 capsomeres and to change the epitope accessibility of VP1 pentamers. These changes may reflect conformational alterations in VP1 capsomeres which are necessary for viral genome encapsidation.

Opening and refolding of simian virus 40 and in vitro packaging of foreign DNA

Simian virus 40 (SV40) can be disassembled under mild conditions by reducing disulfide bonds in the capsid and removing calcium ions. The nucleoprotein complexes formed, analyzed by electron microscopy, were circular and made up of 59 +/- 4 subunits, each with a diameter of about 10 nm. The complexes contained the viral DNA, histones, and the viral capsid proteins. The complexes had much-reduced infectivities compared with intact SV40. Addition of calcium ions to the disrupted virus caused the nucleoprotein complexes to refold into virus-like structures which sedimented at the same rate as intact SV40 and regained infectivity. Treatment of the disrupted SV40 with a high concentration of salt dissociated the viral proteins from the DNA. Lowering stepwise the salt concentration, removing the reducing agent, and adding calcium ions allowed structures to be reformed, and these structures sedimented, like SV40, at 240S and were infectious. The plaque-forming ability of the reconstituted particles was between that of the dissociated components and that of intact SV40. The addition of purified DNA of polyomavirus to the dissociated SV40 before the lowering of the salt concentration showed that virus-like structures could be formed from SV40 proteins and a foreign DNA.

Structure of simian virus 40 at 3.8-A resolution

The crystallographically determined structure of simian virus 40 shows that the 72 pentamers of viral protein VP1, which form the outer shell, have identical conformations except for the C-terminal arms of their subunits. Five arms emerge from each pentamer and insert into neighbouring pentamers. This tying together of standard building blocks allows for the required variability in packing geometry without sacrificing specificity.

Polymorphism in the assembly of polyomavirus capsid protein VP1

Polyomavirus major capsid protein VP1, purified after expression of the recombinant gene in Escherichia coli, forms stable pentamers in low-ionic strength, neutral, or alkaline solutions. Electron microscopy showed that the pentamers, which correspond to viral capsomeres, can be self-assembled into a variety of polymorphic aggregates by lowering the pH, adding calcium, or raising the ionic strength. Some of the aggregates resembled the 500-A-diameter virus capsid, whereas other considerably larger or smaller capsids were also produced. The particular structures formed on transition to an environment favoring assembly depended on the pathway of the solvent changes as well as on the final conditions. Mass measurements from cryoelectron micrographs and image analysis of negatively stained specimens established that a distinctive 320-A-diameter particle consists of 24 close-packed pentamers arranged with octahedral symmetry. Comparison of this unexpected octahedral assembly with a 12-capsomere icosahedral aggregate and the 72-capsomere icosahedral virus capsid by computer graphics methods indicates that similar connections are made among trimers of pentamers in these shells of different size. The polymorphism in the assembly of VP1 pentamers can be related to the switching in bonding specificity required to build the virus capsid.

Identification of proteins encoded by the L1 and L2 open reading frames of human papillomavirus 1a

The human papillomavirus 1 (HPV-1) virion is composed of two virally encoded proteins: a 57,000-molecular-weight polypeptide (57K polypeptide), which is the product of the L1 open reading frame (ORF), and a 78K polypeptide, which is derived from the L2 ORF. The 57K (L1) product, which represents the major structural component, appears to be disulfide cross-linked in virus particles. The 78K (L2) protein is a minor component of the virion and does not appear to be disulfide linked either to the L1 gene product or to itself. Analysis of virus particles banding at different buoyant densities revealed differences in the L2 content of heavy-full and light-full virions. Antiserum prepared against a bacterially expressed fragment of the L1 ORF was found by immunofluorescence to cross-react with HPV-2 and bovine papillomavirus 1 virions in wart sections. No cross-reactivity was observed with antisera prepared against either the N- or C-terminal halves of the L2-encoded protein. Similarly, antisera prepared against purified virus particles (disrupted and nondisrupted) reacted only with an expressed fragment of the L1 ORF and not with either L2-encoded polypeptides or proteins derived from the E1, E2, E4, E6, or E7 ORFs. This indicates that the L1 protein contains the papillomavirus common antigens.

Differences in biological activity and structural protein VP1 phosphorylation of polyomavirus progeny resulting from infection of primary mouse kidney and primary mouse embryo cell cultures

Both primary mouse kidney and primary mouse embryo cells in culture were used for polyomavirus progeny production. Examination of polyomavirus virion structural integrity revealed that mouse embryo cell progeny contained a threefold greater population of unstable particles when compared with mouse kidney cell progeny. Differences in biological activity between these two progeny virion types were also shown. Mouse kidney cell progeny compared with mouse embryo cell progeny exhibited a 10-fold greater ability to agglutinate guinea pig erythrocytes, a 3-fold lower ability to become internalized into monopinocytotic vesicles, and a 2-fold lower ability to initiate a productive infection based on positive nuclear immunofluorescence when mouse embryo host cell cultures were used. The mouse kidney progeny were also found to bind to host cells less specifically than the mouse embryo cell progeny. When these two progeny virion types were labeled in vivo with 32P and subjected to isoelectric focusing followed by sodium dodecyl sulfate-polyacrylamide gel electrophroesis in the second dimension, differences in the phosphorylation pattern of the major virus-encoded structural protein VP1 species were observed. It was revealed that species D and E of mouse kidney cell progeny were phosphorylated to the same degree, while mouse embryo cell progeny species E and F were phosphorylated equally. These data suggest that the host cells play a role in modulating the biological activity of the virus by affecting the degree and site-specific phosphorylation of the major capsid protein VP1 which may influence the recognition of virus attachment proteins for specific cellular receptors.

Chemical cleavage of polyomavirus major structural protein VP1: identification of cleavage products and evidence that the receptor moiety resides in the carboxy-terminal region

As a first step toward identifying the various functional regions of the polyomavirus major capsid protein VP1, we used recently developed methods for the chemical cleavage of proteins and the available polyomavirus sequence data to devise a scheme to produce large, identifiable peptides and generate a cleavage map of VP1. Formic acid (75%) was found to cleave VP1 at only two sites, producing three peptides of apparent molecular weights of 29,000, 16,000, and 2,000. The order of peptides in intact VP1 was determined by recleavage of partial products and was found to be 29,000, 16,000, and 2,000. Two-dimensional peptide mapping studies of 125I-labeled VP1 formic acid peptides established that the limit products of formic acid digestion contained mutually exclusive sets of labeled peptides when either trypsin or chymotrypsin was used and that together the formic acid peptides contained all of the 125I-labeled tryptic and chymotryptic peptides found in VP1. Iodosobenzoic acid (IBA) digestion produced four peptides separable by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, with apparent molecular weights of 12,000, 8,000, 7,000, and 5,000. The approximate positions of the IBA peptides in the VP1 sequence were determined by cleavage of formic acid fragments with IBA. The number of peptides produced, their respective sizes, and their order in the intact VP1 molecule agree with predictions made from available sequence data, both for formic acid cleavage and IBA cleavage. In addition, the numbers of 125I-labeled tryptic peptides produced from digestion of VP1 formic acid peptides also agree with predictions made from the sequence information. These data establish with reasonable certainty that the peptides produced by formic acid cleavage and IBA cleavage of VP1 are indeed those predicted. Antibodies raised against spontaneously produced, previously undefined polypeptides resulting from degradation of VP1 reacted exclusively with the formic acid peptides derived from the C-terminal portion of VP1. These antibodies inhibited hemagglutination and neutralized polyomavirus virions. We interpret this to mean that at least some of the antigenic determinants of the receptor moiety reside in this portion of the VP1 sequence.

Comparison of nonphosphorylated and phosphorylated species of polyomavirus major capsid protein VP1 and identification of the major phosphorylation region

The major virion protein of polyomavirus, VP1, consists of about six isoelectric species designated A through F. The minor species D, E, and F are phosphorylated and are thought to serve as viral receptors. We first wanted to distinguish whether all VP1 species are derived by post-translational modification from a common amino acid sequence or whether one or more of the species contain a region(s) of altered amino acid sequence resulting from alternate mRNA processing. We compared the VP1 species by detailed peptide mapping with several combinations of specific protease and radioisotopic labels. This approach enabled us to examine more than 80% of the predicted VP1 sequence, including the amino-and carboxy-termini. We found no evidence of sequence differences among any of the VP1 species. The specific incorporation of 32Pi was found to be the same for all of the phosphorylated species. Comparison of the phosphorylation sites of in vivo 32Pi-labeled D, E, and F by peptide mapping showed them to be identical. Each phosphorylated species contained a single major phosphopeptide and several minor phosphopeptides. The major phosphoamino acid, identified by acid hydrolysis, was phosphothreonine, with phosphoserine also present. By using chemical cleavage methods, we localized the major phosphorylation region to a central portion of the VP1 sequence. We discuss some features of this region and relate this information to functional implications of phosphorylation.

Identification of B-lymphotropic papovavirus-coded proteins

The lymphotropic papovavirus (LPV)-specific mRNAs were translated in vitro in rabbit reticulocyte lysates. The specific products were 84,000-dalton (84K), 41K, 35K, and 26K proteins. Immunoprecipitation with anti-LPV hamster sera and analysis of partially purified LPV virions showed that the last three proteins were the LPV capsid proteins, and we designated the 41K, 35K, and 26K proteins VP1 (major capsid protein), VP2, and VP3, respectively. Several characteristics, such as the small amount of mRNA for the 84K protein at late stages of infection, its absence from partially purified virus preparations, no common tryptic peptides between the 84K and 41K proteins, and the pattern of in vivo phosphorylation, suggest that the 84K protein is not a simple dimer of the 41K protein. Normal human sera and sera from certain leukemic patients positive for antibody to LPV viral antigens immunoprecipitated the 41K protein.

Simian virus 40 encapsidation: characterization of early intermediates

Simian virus 40 chromosomes were separated into various species by a two-step purification consisting of low-ionic-strength glycerol gradient sedimentation followed by low-ionic-strength agarose gel electrophoresis. For each species of simian virus 40 chromosome purified, the comigrating DNA and proteins were identified by agarose or polyacrylamide gel electrophoresis, respectively. Two species of chromosomes were identified which contained form I and form II DNA and large amounts of viral protein; they migrated more slowly than most of the free simian virus 40 chromosomes, which contained very little viral protein. The nuclease susceptibility of these chromosomes suggests to us that they are intermediates in encapsidation, and we describe an encapsidation model.

Polyoma virus DNA: complete nucleotide sequence of the gene which codes for polyoma virus capsid protein VP1 and overlaps the VP2/VP3 genes

The nucleotide sequence of part of the late region of the polyoma virus genome was determined. It contains coding information for the major capsid protein VP1 and the C-terminal region of the minor proteins VP2 and VP3. In the sequence with the same polarity as late mRNA's, all coding frames are blocked by termination codons in a region around 48 units on the physical map. This is the region where the N-terminus of VP1 and the C-termini of VP2 and VP3 have been located (T. Hunter and W. Gibson, J. Virol. 28:240-253, 1978; S. G. Siddell and A. E. Smith, J. Virol. 27:427-431, 1978; Smith et al., Cell 9:481-487, 1976). There are two long uninterrupted coding frames in the late region of polyoma virus DNA. One lies at the 5' end of the sequence and contains potential coding sequences for VP2 and VP3. The other contains 383 consecutive sense codons starting with the ATG at nucleotide position 1,218, extends from 47.5 to 25.8 units counterclockwise on the physical map, and is located where the VP1 gene has been mapped. The VP1 gene overlaps the genes for proteins VP2/VP3 by 32 nucleotides and uses a different coding frame. From the DNA sequence, the amino acid sequence of VP1 was predicted. The proposed VP1 sequence is in good agreement with other data, namely, with the partial N-terminal amino acid sequence and the total amino acid composition. The VP1 coding frame terminates with a TAA codon at 25.8 map units. This is followed by an AATAAA sequence, which may act as a processing signal for the viral late mRNA's. When both nucleotide and amino acid sequences are compared with their counterparts in the related simian virus 40, extensive homologies are found over the entire region of the two viral genomes. Maximum homology appears to occur in those regions which code for the C-termini of the VP1 proteins. The overlap region of VP1 with VP2/VP3 of polyoma virus is shorter by 90 nucleotides than is that of simian virus 40 and shows very limited homology with the simian virus 40 sequence. This leads to the suggestion that the overlap segments of both viruses have been freed from stringency imposed on drifting during evolution and that proteins VP2 and VP3 of polyoma virus may have been truncated by the appearance of a termination codon within the sequence.

Nucleotide sequence of the simian virus 40 Hind II + III restriction fragment J and the total amino acid sequence of the major structural protein VP1

The HindII + III restriction fragment J (Hind-J) represents 4.58% of the simian virus 40 genome. The information present in Hind-J is expressed as part of the major, late 16-S messenger RNA, which codes for the structural protein VP1. The nucleotide sequence of the 240-base-pairs-long Hind fragment J has been determined by analysis of each oligonucleotide from both strands resulting from T1 or pancreatic RNase digestion of RNA transcribed from the DNA and from RNase digestion of ribo-substituted DNA. Large oligonucleotide blocks which could be constructed mainly on the basis of complementarity were subsequently ordered by partial chemical degradation of terminally labeled DNA. This direct DNA sequencing approach also completely confirmed the results obtained by both aforementioned RNase degradation methods. In the strand with the same polarity as the late mRNA, triplets corresponding to termination codons are present in two of the three reading frames. The one open reading frame connects in phase with the open reading frame of the neighboring HindII/ III fragments K, F and G, which have been published previously and which together with Hind-J span the total VP1 gene. Some features of the primary nucleotide sequence of this VP1 gene and the derived VP1 amino acid sequence are discussed.