Long regions of homologous DNA are incorporated into the tobacco plastid genome by transformation

Marker-Free Transplastomic Plants by Excision of Plastid Marker Genes Using Directly Repeated DNA Sequences

Excision of marker genes using DNA direct repeats makes use of the efficient native homologous recombination pathway present in the plastids of algae and plants. The method is simple, efficient, and widely applicable to plants and green algae. Marker excision frequency is dependent on the length and number of directly repeated sequences. When two repeats are used a repeat size of greater than 600 bp promotes efficient excision of the marker gene. A wide variety of sequences can be used to make the direct repeats. Only a single round of transformation is required and there is no requirement to introduce site-specific recombinases by retransformation or sexual crosses. Selection is used to maintain the marker and ensure homoplasmy of transgenic plastid genomes (plastomes). Release of selection allows the accumulation of marker-free plastomes generated by marker excision, which is a spontaneous and unidirectional process. Cytoplasmic sorting allows the segregation of cells with marker-free transgenic plastids. The marker-free shoots resulting from direct repeat mediated excision of marker genes have been isolated by vegetative propagation of shoots in the T₀ generation. Alternatively, accumulation of marker-free plastomes during growth, development and flowering of T₀ plants allows for the collection of seeds that give rise to a high proportion of marker-free T₁ seedlings. The procedure enables precise plastome engineering involving insertion of transgenes, point mutations and deletion of genes without the inclusion of any extraneous DNA. The simplicity and convenience of direct repeat excision facilitates its widespread use to isolate marker-free crops.

Characterization of the Chloroplast Genome Facilitated the Transformation of Parachlorella kessleri-I, A Potential Marine Alga for Biofuel Production

Introduction

The microalga Parachlorella kessleri-I produces high biomass and lipid content that could be suitable for producing economically viable biofuel at a commercial scale. Sequencing the complete chloroplast genome is crucial for the construction of a species-specific chloroplast transformation vector.

Methods

In this study, the complete chloroplast genome sequence (cpDNA) of P. kessleri-I was assembled; annotated and genetic transformation of the chloroplast was optimized. For the chloroplast transformation, we have tested two antibiotic resistance makers, aminoglycoside adenine transferase (aadA) gene and Sh-ble gene conferring resistance to spectinomycin and zeocin, respectively. Transgene integration and homoplasty determination were confirmed using PCR, Southern blot and Droplet Digital PCR.

Results

The chloroplast genome (109,642 bp) exhibited a quadripartite structure with two reverse repeat regions (IRA and IRB), a long single copy (LSC), and a small single copy (SSC) region. The genome encodes 116 genes, with 80 protein-coding genes, 32 tRNAs and 4 rRNAs. The cpDNA provided essential information like codons, UTRs and flank sequences for homologous recombination to make a species-specific vector that facilitated the transformation of P. kessleri-I chloroplast. The transgenic algal colonies were retrieved on a TAP medium containing 400 mg. L^-1 spectinomycin, but no transgenic was recovered on the zeocin-supplemented medium. PCR and Southern blot analysis ascertained the transgene integration into the chloroplast genome, via homologous recombination. The chloroplast genome copy number in wildtype and transgenic P. kessleri-I was determined using Droplet Digital PCR.

Conclusion

The optimization of stable chloroplast transformation in marine alga P. kessleri-I should open a gateway for directly engineering the strain for carbon concentration mechanisms to fix more CO₂, improving the photosynthetic efficiency and reducing the overall biofuels production cost.

Construction of a species-specific vector for improved plastid transformation efficiency in Capsicum annuum L

In the present study, we focused on designing a species-specific chloroplast vector for Capsicum annuum L. and finding out its transformation efficiency compared to a heterologous vector. The plastid transformation vector (CaIA) was designed to target homologous regions trnA and trnI of IR region. A selectable marker gene aadA, whose expression is controlled by psbA promoter and terminator, was cloned between two flanking regions. A heterologous vector pRB95, which targets trnfM and trnG of LSC region along with aadA driven by rrn promoter and psbA terminator, was also used for developing plastid transformation in Capsicum. Cotyledonary explants were bombarded with stabilized biolistic parameters: 900 psi pressure and 9 cm flight distance, and optimized regeneration protocol (0.7 mg/L TDZ + 0.2 mg/L IAA) was used to obtain transplastomic lines on selection medium (300 mg/L spectinomycin). The aadA integration and homoplasmy were confirmed by obtaining 1.2 and 3.7 kb amplicons in CaIA transformants and subsequently verified by Southern blotting, whereas in pRB95 transformants, integration was confirmed by PCR with 1.45 kb and 255 bp amplicons corresponding to aadA integration and flanks, respectively. The transformation efficiencies attained with two plastid vectors were found to be 20%, i.e., 10 transplastomic lines in 50 bombarded plates, with CaIA and 2%, i.e., 1 transplastomic line in 50 bombarded plates, with heterologous pRB95, respectively.

MoChlo: A Versatile, Modular Cloning Toolbox for Chloroplast Biotechnology

Plant synthetic biology is a rapidly evolving field with new tools constantly emerging to drive innovation. Of particular interest is the application of synthetic biology to chloroplast biotechnology to generate plants capable of producing new metabolites, vaccines, biofuels, and high-value chemicals. Progress made in the assembly of large DNA molecules, composing multiple transcriptional units, has significantly aided in the ability to rapidly construct novel vectors for genetic engineering. In particular, Golden Gate assembly has provided a facile molecular tool for standardized assembly of synthetic genetic elements into larger DNA constructs. In this work, a complete modular chloroplast cloning system, MoChlo, was developed and validated for fast and flexible chloroplast engineering in plants. A library of 128 standardized chloroplast-specific parts (47 promoters, 38 5' untranslated regions [5'UTRs], nine promoter:5'UTR fusions, 10 3'UTRs, 14 genes of interest, and 10 chloroplast-specific destination vectors) were mined from the literature and modified for use in MoChlo assembly, along with chloroplast-specific destination vectors. The strategy was validated by assembling synthetic operons of various sizes and determining the efficiency of assembly. This method was successfully used to generate chloroplast transformation vectors containing up to seven transcriptional units in a single vector (∼10.6-kb synthetic operon). To enable researchers with limited resources to engage in chloroplast biotechnology, and to accelerate progress in the field, the entire kit, as described, is available through Addgene at minimal cost. Thus, the MoChlo kit represents a valuable tool for fast and flexible design of heterologous metabolic pathways for plastid metabolic engineering.

Excision of plastid marker genes using directly repeated DNA sequences

Excision of marker genes using DNA direct repeats makes use of the predominant homologous recombination pathways present in the plastids of algae and plants. The method is simple, efficient, and widely applicable to plants and microalgae. Marker excision frequency is dependent on the length and number of directly repeated sequences. When two repeats are used a repeat size of greater than 600 bp promotes efficient excision of the marker gene. A wide variety of sequences can be used to make the direct repeats. Only a single round of transformation is required, and there is no requirement to introduce site-specific recombinases by retransformation or sexual crosses. Selection is used to maintain the marker and ensure homoplasmy of transgenic plastid genomes. Release of selection allows the accumulation of marker-free plastid genomes generated by marker excision, which is spontaneous, random, and a unidirectional process. Positive selection is provided by linking marker excision to restoration of the coding region of an herbicide resistance gene from two overlapping but incomplete coding regions. Cytoplasmic sorting allows the segregation of cells with marker-free transgenic plastids. The marker-free shoots resulting from direct repeat-mediated excision of marker genes have been isolated by vegetative propagation of shoots in the T0 generation. Alternatively, accumulation of marker-free plastid genomes during growth, development and flowering of T0 plants allows the collection of seeds that give rise to a high proportion of marker-free T1 seedlings. The simplicity and convenience of direct repeat excision facilitates its widespread use to isolate marker-free crops.

Spectinomycin resistance mutations in the rrn16 gene are new plastid markers in Medicago sativa

We report here the isolation of spectinomycin-resistant mutants in cultured cells of Medicago sativa line RegenSY-T2. Spectinomycin induces bleaching of cultured alfalfa cells due to inhibition of protein synthesis on the prokaryotic type 70S plastid ribosomes. Spontaneous mutants resistant to spectinomycin bleaching were identified by their ability to form green shoots on plant regeneration medium containing selective spectinomycin concentrations in the range of 25-50 mg/l. Sequencing of the plastid rrn16 gene revealed that spectinomycin resistance is due to mutations in a conserved stem structure of the 16S rRNA. Resistant plants transferred to the greenhouse developed normally and produced spectinomycin-resistant seed progeny. In light of their absence in soybean, a related leguminous plant, the isolation of spectinomycin-resistant mutants in M. sativa was unexpected. The new mutations are useful for the study of plastid inheritance, as demonstrated by detection of predominantly paternal plastid inheritance in the RegenSY-T2 × Szapko57 cross, and can be used as selective markers in plastid transformation vectors to obtain cisgenic plants.

Reconstruction of a human mitochondrial complex I mutation in the unicellular green alga Chlamydomonas

Defects in complex I (NADH:ubiquinone oxidoreductase (EC 1.6.5.3)) are the most frequent cause of human respiratory disorders. The pathogenicity of a given human mitochondrial mutation can be difficult to demonstrate because the mitochondrial genome harbors large numbers of polymorphic base changes that have no pathogenic significance. In addition, mitochondrial mutations are usually found in the heteroplasmic state, which may hide the biochemical effect of the mutation. We propose that the unicellular green alga Chlamydomonas could be used to study such mutations because (i) respiratory complex-deficient mutants are viable and mitochondrial mutations are found in the homoplasmic state, (ii) transformation of the mitochondrial genome is feasible, and (iii) Chlamydomonas complex I is similar to that of humans. To illustrate this proposal, we introduced a Leu157Pro substitution into the Chlamydomonas ND4 subunit of complex I in two recipient strains by biolistic transformation, demonstrating that site-directed mutagenesis of the Chlamydomonas mitochondrial genome is possible. This substitution did not lead to any respiratory enzyme defects when present in the heteroplasmic state in a patient with chronic progressive external ophthalmoplegia. When present in the homoplasmic state in the alga, the mutation does not prevent assembly of whole complex I (950 kDa) and the NADH dehydrogenase activity of the peripheral arm of the complex is mildly affected. However, the NADH:duroquinone oxidoreductase activity is strongly reduced, suggesting that the substitution could affect binding of ubiquinone to the membrane domain. The in vitro defects correlate with a decrease in dark respiration and growth rate in vivo.

Transfection of plant mitochondria and in organello gene integration

Investigation and manipulation of mitochondrial genetics in animal and plant cells remains restricted by the lack of an efficient in vivo transformation methodology. Mitochondrial transfection in whole cells and maintenance of the transfected DNA are main issues on this track. We showed earlier that isolated mitochondria from different organisms can import DNA. Exploiting this mechanism, we assessed the possibility to maintain exogenous DNA in plant organelles. Whereas homologous recombination is scarce in the higher plant nuclear compartment, recombination between large repeats generates the multipartite structure of the plant mitochondrial genome. These processes are under strict surveillance to avoid extensive genomic rearrangements. Nevertheless, following transfection of isolated organelles with constructs composed of a partial gfp gene flanked by fragments of mitochondrial DNA, we demonstrated in organello homologous recombination of the imported DNA with the resident DNA and integration of the reporter gene. Recombination yielded insertion of a continuous exogenous DNA fragment including the gfp sequence and at least 0.5 kb of flanking sequence on each side. According to our observations, transfection constructs carrying multiple sequences homologous to the mitochondrial DNA should be suitable and targeting of most regions in the organelle genome should be feasible, making the approach of general interest.

The chloroplast transformation toolbox: selectable markers and marker removal

Plastid transformation is widely used in basic research and for biotechnological applications. Initially developed in Chlamydomonas and tobacco, it is now feasible in a broad range of species. Selection of transgenic lines where all copies of the polyploid plastid genome are transformed requires efficient markers. A number of traits have been used for selection such as photoautotrophy, resistance to antibiotics and tolerance to herbicides or to other metabolic inhibitors. Restoration of photosynthesis is an effective primary selection method in Chlamydomonas but can only serve as a screening tool in flowering plants. The most successful and widely used markers are derived from bacterial genes that inactivate antibiotics, such as aadA that confers resistance to spectinomycin and streptomycin. For many applications, the presence of a selectable marker that confers antibiotic resistance is not desirable. Efficient marker removal methods are a major attraction of the plastid engineering tool kit. They exploit the homologous recombination and segregation pathways acting on chloroplast genomes and are based on direct repeats, transient co-integration or co-transformation and segregation of trait and marker genes. Foreign site-specific recombinases and their target sites provide an alternative and effective method for removing marker genes from plastids.

Genetic engineering of radish: current achievements and future goals

Radish is a major root crop grown in the Far East and is especially important to some low-income countries where it is consumed on a daily basis. Developments in gene technology systems have helped to accelerate the production of useful germplasms, but progress has been slow, though achieved, via in planta methods and useful traits have been introduced. In the wake of the new Millennium, future goals in terms of improving transformation efficiency and selection of new traits for generating late-flowering radish are described. Furthermore, the techniques available for incorporating pharmaceutical proteins into radish to deliver edible proteins on-site are discussed. Finally, the concerns of releasing transgenic radish to the field in terms of pollen-mediated gene transfer are also reviewed. Such a report identifies key areas of research that is required to allow the crop satisfy the need of poor impoverished countries in the Far East.

Arabidopsis thaliana, a plant model organism for the neuronal microtubule cytoskeleton?

The microtubule cytoskeleton is an important component of both neuronal cells and plant cells. While there are large differences in the function of microtubules between the two groups of organisms, for example plants coordinate the ordered deposition of cellulose through the microtubule cytoskeleton, there are also some notable similarities. It is suggested that Arabidopsis thaliana, with its superior availability of knockout lines, may be a suitable model organism for some aspects of the neuronal microtubule cytoskeleton. Some cellular processes that involve the neuronal microtubule cytoskeleton including neurotransmitter signalling and neurotrophic support may have homologous processes in plant cells. A number of microtubule-associated proteins (MAPs) are conserved, including katanin, EB1, CLASP, spastin, gephyrin, CRIPT, Atlastin/RHD3, and ELP3. As a demonstration of the usefulness of a plant model system for neuronal biology, an analysis of plant tubulin-binding proteins was used to show that Charcot-Marie-Tooth disease type 2D and spinal muscular atrophy may be due to microtubule dysfunction and suggest that indeed the plant microtubule cytoskeleton may be particularly similar to that of motor neurons as both are heavily reliant upon motor proteins.

Whirly proteins maintain plastid genome stability in Arabidopsis

Maintenance of genome stability is essential for the accurate propagation of genetic information and cell growth and survival. Organisms have therefore developed efficient strategies to prevent DNA lesions and rearrangements. Much of the information concerning these strategies has been obtained through the study of bacterial and nuclear genomes. Comparatively, little is known about how organelle genomes maintain a stable structure. Here, we report that the plastid-localized Whirly ssDNA-binding proteins are required for plastid genome stability in Arabidopsis. We show that a double KO of the genes AtWhy1 and AtWhy3 leads to the appearance of plants with variegated green/white/yellow leaves, symptomatic of nonfunctional chloroplasts. This variegation is maternally inherited, indicating defects in the plastid genome. Indeed, in all variegated lines examined, reorganized regions of plastid DNA are amplified as circular and/or head-tail concatemers. All amplified regions are delimited by short direct repeats of 10-18 bp, strongly suggesting that these regions result from illegitimate recombination between repeated sequences. This type of recombination occurs frequently in plants lacking both Whirlies, to a lesser extent in single KO plants and rarely in WT individuals. Maize mutants for the ZmWhy1 Whirly protein also show an increase in the frequency of illegitimate recombination. We propose a model where Whirlies contribute to plastid genome stability by protecting against illegitimate repeat-mediated recombination.

Extensive homologous recombination between introduced and native regulatory plastid DNA elements in transplastomic plants

Homologous recombination within plastids directs plastid genome transformation for foreign gene expression and study of plastid gene function. Though transgenes are generally efficiently targeted to their desired insertion site, unintended homologous recombination events have been observed during plastid transformation. To understand the nature and abundance of these recombination events, we analyzed transplastomic tobacco lines derived from three different plastid transformation vectors utilizing two different loci for foreign gene insertion. Two unintended recombinant plastid DNA species were formed from each regulatory plastid DNA element included in the transformation vector. Some of these recombinant DNA species accumulated to as much as 10-60% of the amount of the desired integrated transgenic sequence in T0 plants. Some of the recombinant DNA species undergo further, "secondary" recombination events, resulting in an even greater number of recombinant plastid DNA species. The abundance of novel recombinant DNA species was higher in T0 plants than in T1 progeny, indicating that the ancillary recombination events described here may have the greatest impact during selection and regeneration of transformants. A line of transplastomic tobacco was identified containing an antibiotic resistance gene unlinked from the intended transgene insertion as a result of an unintended recombination event, indicating that the homologous recombination events described here may hinder efficient recovery of plastid transformants containing the desired transgene.

Next generation synthetic vectors for transformation of the plastid genome of higher plants

Plastid transformation vectors are E. coli plasmids carrying a plastid marker gene for selection, adjacent cloning sites and flanking plastid DNA to target insertions in the plastid genome by homologous recombination. We report here on a family of next generation plastid vectors carrying synthetic DNA vector arms targeting insertions in the rbcL-accD intergenic region of the tobacco (Nicotiana tabacum) plastid genome. The pSS22 plasmid carries only synthetic vector arms from which the undesirable restriction sites have been removed by point mutations. The pSS24 vector carries a c-Myc tagged spectinomycin resistance (aadA) marker gene whereas in vector pSS30 aadA is flanked with loxP sequences for post-transformation marker excision. The synthetic vectors will enable direct manipulation of passenger genes in the transformation vector targeting insertions in the rbcL-accD intergenic region that contains many commonly used restriction sites.

Elimination of deleterious mutations in plastid genomes by gene conversion

Asexual reproduction is believed to be detrimental, mainly because of the accumulation of deleterious mutations over time, a hypothesis known as Muller's ratchet. In seed plants, most asexually reproducing genetic systems are polyploid, with apomictic species (plants forming seeds without fertilization) as well as plastids and mitochondria providing prominent examples. Whether or not polyploidy helps asexual genetic systems to escape Muller's ratchet is unknown. Gene conversion, particularly when slightly biased, represents a potential mechanism that could allow asexual genetic systems to reduce their mutation load in a genome copy number-dependent manner. However, direct experimental evidence for the operation of gene conversion between genome molecules to correct mutations is largely lacking. Here we describe an experimental system based on transgenic tobacco chloroplasts that allows us to analyze gene conversion events in higher plant plastid genomes. We provide evidence for gene conversion acting as a highly efficient mechanism by which the polyploid plastid genetic system can correct deleterious mutations and make one good genome out of two bad ones. Our finding that gene conversion can be biased may provide a molecular link between asexual reproduction, high genome copy numbers and low mutation rates.

Active digestion of sperm mitochondrial DNA in single living sperm revealed by optical tweezers

In almost all eukaryotes, mitochondrial (mt) genes are transmitted to progeny mainly from the maternal parent. The most popular explanation for this phenomenon is simple dilution of paternal mtDNA, because the paternal gametes (sperm) are much smaller than maternal gametes (egg) and contribute a limited amount of mitochondria to the progeny. Recently, this simple explanation has been challenged in several reports that describe the active digestion of sperm mtDNA, down-regulation of mtDNA replication in sperm, and proteolysis of mitochondria triggered by ubiquitination. In this investigation, we visualized mt nucleoids in living sperm by using highly sensitive SYBR green I vital staining. The ability to visualize mt nucleoids allowed us to clarify that the elimination of sperm mtDNA upon fertilization is achieved through two steps: (i) gradual decrease of mt nucleoid numbers during spermatogenesis and (ii) rapid digestion of sperm mtDNA just after fertilization. One notable point is that the digestion of mtDNA is achieved before the complete destruction of mitochondrial structures, which may be necessary to avoid the diffusion and transmission of potentially deleterious sperm mtDNA to the progeny.

Stable plastid transformation in lettuce (Lactuca sativa L.)

Although plastid transformation in higher plants was first demonstrated in the early 1990s it is only recently that the technology is being extended to a broader range of species. To date, the production of fertile transplastomic plants has been reported for tobacco, tomato, petunia, soybean, cotton and Lesquerella fendleri (Brassicaceae). In this study we demonstrate a polyethylene glycol-mediated plastid transformation system for lettuce that generates fertile, homoplasmic, plastid-transformed lines. Transformation was achieved using a vector that targets genes to the trnA/trnI intergenic region of the lettuce plastid genome employing the aadA gene as a selectable marker against spectinomycin. Spectinomycin resistance and heterologous gene transcription were shown in T(1) plants derived from self-pollinated primary regenerants demonstrating transmission of the plastid-encoded transgene to the first seed generation. Crossing with male sterile wild-type lettuce showed that spectinomycin resistance was not transmitted via pollen. Constructs containing the gfp gene showed plastid-based expression of green fluorescent protein. The lettuce plastid could have potential both as a production and a delivery system for edible human therapeutic proteins.

Plastid transformants of tomato selected using mutations affecting ribosome structure

Tomato plastid transformants were obtained using two vectors containing cloned plastid DNA of either Nicotiana tabacum or Solanum nigrum and including point mutations conferring resistance to spectinomycin and streptomycin. Transformants were recovered after PEG-mediated direct DNA uptake into protoplasts, followed by selection on spectinomycin-containing medium. Sixteen lines contained the point mutation, as confirmed by mapping restriction enzyme sites. One line obtained with each vector was analysed in more detail, in comparison with a spontaneous spectinomycin-resistant mutant. Integration of the cloned Solanum or Nicotiana plastid DNA, by multiple recombination events, into the tomato plastome was confirmed by sequence analysis of the targeted region of plastid DNA in the inverted repeat region. Maternal inheritance of spectinomycin and streptomycin resistances or sensitivity in seedlings also confirmed the transplastomic status of the two transformants. The results demonstrate the efficacy in tomato of a selection strategy which avoids the integration of a dominant bacterial antibiotic resistance gene.

Expression of non-toxic mutant of Escherichia coli heat-labile enterotoxin in tobacco chloroplasts

Chloroplast transformation systems offer unique advantages in biotechnology, including high level of foreign gene expression, maternal inheritance, and polycistronic expression. We studied chloroplast expression of LTK63 (change Ser-->Lys at position 63 in the A subunit) which is the mutant of Escherichia coli heat-labile toxin. LTK63 is devoid of any toxic activity, but still retains its mucosal adjuvanticity. The LTK63 was cloned into chloroplast targeting vector and transformed to tobacco chloroplasts by particle bombardment. PCR and Southern blot analyses confirmed stable homologous recombination of the LTK63 gene into the chloroplast genome. The amount of LTK63 protein detected in tobacco chloroplasts was approximately 3.7% of the total soluble protein. The GM1-ganglioside binding assay confirmed that chloroplast-synthesized LTB of LTK63 binds to the intestinal membrane GM1-ganglioside receptor. Thus, the expression of LTK63 in chloroplasts provides a potential route toward the development of a plant-based edible vaccine for high expression system and environmentally friendly approach.

Plastid transformation in higher plants

Plastids of higher plants are semi-autonomous organelles with a small, highly polyploid genome and their own transcription-translation machinery. This review provides an overview of the technology for the genetic modification of the plastid genome including: vectors, marker genes and gene design, the use of gene knockouts and over-expression to probe plastid function and the application of site-specific recombinases for excision of target DNA. Examples for applications in basic science include the study of plastid gene transcription, mRNA editing, photosynthesis and evolution. Examples for biotechnological applications are incorporation of transgenes in the plastid genome for containment and high-level expression of recombinant proteins for pharmaceutical and industrial applications. Plastid transformation is routine only in tobacco. Progress in implementing the technology in other crops is discussed.

Discoveries in oxygenic photosynthesis (1727-2003): a perspective

We present historic discoveries and important observations, related to oxygenic photosynthesis, from 1727 to 2003. The decision to include certain discoveries while omitting others has been difficult. We are aware that ours is an incomplete timeline. In part, this is because the function of this list is to complement, not duplicate, the listing of discoveries in the other papers in these history issues of Photosynthesis Research. In addition, no one can know everything that is in the extensive literature in the field. Furthermore, any judgement about significance presupposes a point of view. This history begins with the observation of the English clergyman Stephen Hales (1677-1761) that plants derive nourishment from the air; it includes the definitive experiments in the 1960-1965 period establishing the two-photosystem and two-light reaction scheme of oxygenic photosynthesis; and includes the near-atomic resolution of the structures of the reaction centers of these two Photosystems, I and II, obtained in 2001-2002 by a team in Berlin, Germany, coordinated by Horst Witt and Wolfgang Saenger. Readers are directed to historical papers in Govindjee and Gest [(2002a) Photosynth Res 73: 1-308], in Govindjee, J. Thomas Beatty and Howard Gest [(2003a) Photosynth Res 76: 1-462], and to other papers in this issue for a more complete picture. Several photographs are provided here. Their selection is based partly on their availability to the authors (see Figures 1-15). Readers may view other photographs in Part 1 (Volume 73, Photosynth Res, 2002), Part 2 (Volume 76, Photosynth Res, 2003) and Part 3 (Volume 80 Photosynth Res, 2004) of the history issues of Photosynthesis Research. Photographs of most of the Nobel-laureates are included in Govindjee, Thomas Beatty and John Allen, this issue. For a complementary time line of anoxygenic photosynthesis, see H. Gest and R. Blankenship (this issue).

Plastid transformation in Lesquerella fendleri, an oilseed Brassicacea

A plastid transformation protocol was developed for Lesquerella fendleri, a species with a high capacity for plant regeneration in tissue culture. Transformation vector pZS391B carried an aadA16gfp marker gene conferring streptomycin-spectinomycin resistance and green fluorescence under UV light. Biolistic transformation of 51 Lesquerella leaf samples, followed by spectinomycin selection, yielded two transplastomic clones. The AAD-GFP fusion protein, the marker gene product, was localized to chloroplasts by confocal laser microscopy. Fertile plants and seed progeny were obtained in line Lf-pZS391B-1. In the 51 samples a large number (108) of spontaneous mutants were identified. In five of the lines spectinomycin resistance was localized to a conserved stem structure by sequencing 16S rRNA genes. Success in L. fendleri, a wild oilseed species, extends plastid transformation beyond Arabidopsis thaliana in the Brassicaceae family.

Homologous recombination and gene targeting in plant cells

Gene targeting has become an indispensable tool for functional genomics in yeast and mouse; however, this tool is still missing in plants. This review discusses the gene targeting problem in plants in the context of general knowledge on recombination and gene targeting. An overview on the history of gene targeting is followed by a general introduction to genetic recombination of bacteria, yeast, and vertebrates. This abridged discussion serves as a guide to the following sections, which cover plant-specific aspects of recombination assay systems, the mechanism of recombination, plant recombination genes, the relationship of recombination to the environment, approaches to stimulate homologous recombination and gene targeting, and a description of two plant systems, the moss Physcomitrella patens and the chloroplast, that naturally have high efficiencies of gene targeting. The review concludes with a discussion of alternatives to gene targeting.

Transgenic plastids in basic research and plant biotechnology

Facile methods of genetic transformation are of outstanding importance for both basic and applied research. For many years, transgenic technologies for plants were restricted to manipulations of the nuclear genome. More recently, a second genome of the plant cell has become amenable to genetic engineering: the prokaryotically organized circular genome of the chloroplast. The possibility to directly manipulate chloroplast genome-encoded information has paved the way to detailed in vivo studies of virtually all aspects of plastid gene expression. Moreover, plastid transformation technologies have been intensely used in functional genomics by performing gene knockouts and site-directed mutageneses of plastid genes. These studies have contributed greatly to our understanding of the physiology and biochemistry of biogenergetic processes inside the plastid compartment. Plastid transformation technologies have also stirred considerable excitement among plant biotechnologists, since transgene expression from the plastid genome offers a number of most attractive advantages, including high-level foreign protein expression and transgene containment due to lack of pollen transmission. This review describes the generation of plants with transgenic plastids, summarizes our current understanding of the transformation process and highlights selected applications of transplastomic technologies in basic and applied research.

Stable genetic transformation of tomato plastids and expression of a foreign protein in fruit

Transgenic chloroplasts offer unique advantages in plant biotechnology, including high-level foreign protein expression, absence of epigenetic effects, and gene containment due to the lack of transgene transmission through pollen. However, broad application of plastid genome engineering in biotechnology has been largely hampered by both the lack of chloroplast transformation systems for major crop plants and the usually low plastid gene expression levels in nongreen tissues such as fruits, tubers, and other storage organs. Here we describe the development of a plastid transformation system for tomato, Lycopersicon esculentum. This is the first report on the generation of fertile transplastomic plants in a food crop with an edible fruit. We show that chromoplasts in the tomato fruit express the transgene to approximately 50% of the expression levels in leaf chloroplasts. Given the generally very high foreign protein accumulation rates that can be achieved in transgenic chloroplasts (>40% of the total soluble protein), this system paves the way to efficient production of edible vaccines, pharmaceuticals, and antibodies in tomato.

Novel approach in plastid transformation

Engineering the nuclear genome of plants is perceived to be associated with problems regarding biosafety and the stability of expression of the transgene. Alternative transformation strategies using the genomic outfit of the plastid promise to be more successful in this respect. Over the past few years progress has been made in screening procedures, and plastid transformation technology has allowed function to be assigned to open reading frames, massive expression of insecticidal agents and proteins involved in herbicide resistance, and the accumulation of biopolymers. Recently, the design of a novel femtoinjection technique that allows injection into chloroplasts has provided the opportunity to further manipulate and understand chloroplastic gene expression.

Genetic engineering of the chloroplast

Transformation of the plastid genome has a number of inherent advantages for the engineering of gene expression in plants. These advantages include: 10-50 times higher transgene expression levels; the absence of gene silencing and position effect variation; the ability to express polycistronic messages from a single promoter; uniparental plastid gene inheritance in most crop plants that prevents pollen transmission of foreign DNA; integration via a homologous recombination process that facilitates targeted gene replacement and precise transgene control; and sequestration of foreign proteins in the organelle which prevents adverse interactions with the cytoplasmic environment. It is now 12 years since the first conclusive demonstration of stable introduction of cloned DNA into the Chlamydomonas chloroplast by the Boynton and Gillham laboratory, and 10 years since the laboratory of Pal Maliga successfully extended these approaches to tobacco. Since then, technical developments in plastid transformation and advances in our understanding of the rules of plastid gene expression have facilitated tremendous progress towards the goal of establishing the chloroplast as a feasible platform for genetic modification of plants.

Little or No Repair of Cyclobutyl Pyrimidine Dimers Is Observed in the Organellar Genomes of the Young Arabidopsis Seedling

A Southern-blot-based, site-specific assay for ultraviolet (UV)-induced cyclobutyl pyrimidine dimers (CPDs), employing the CPD-specific enzyme T4 endonuclease V, was used to follow the repair of this lesion in particular DNA sequences in 5- to 6-d-old Arabidopsis thaliana seedlings. CPDs, measured as enzyme-sensitive sites, in nuclear sequences were removed rapidly in the light but were repaired slowly, if at all, in the dark. This result was identical to that obtained in prior analyses of CPDs in total cellular DNA. Assay of representative chloroplast and mitochondrial sequences in the same DNA preparations revealed that, in contrast to nuclear sequences, enzyme-sensitive sites are inefficiently eliminated in both the presence and absence of visible light. These observations suggest that Arabidopsis seedlings possess little or no capacity for the repair of CPDs in the organellar genomes. Given the fact that the UV dose employed only marginally affected the growth of the seedlings, we suggest that Arabidopsis seedlings must possess very efficient mechanism(s) for the tolerance of UV-induced DNA damage.

Tobacco (Nicotiana tobaccum) nuclear transgenics with high copy number can express NPTII driven by the chloroplast psbA promoter

A chloroplast expression vector containing the NPTII gene under the control of apsbA promoter (psbA-NPTII) was constructed, and was biolistically delivered into both suspension cells and leaf strips of tobacco (Nicotiana tabaccum). Analyses of subsequently recovered kanamycin-resistant transgenic plants indicate that the psbA-NPTII gene was not located in the chloroplast, but was in the nucleus in very high copy number. This conclusion was based upon results from: (1) Southern hybridization analyses of chloroplast and nuclear DNAs using NPTII, chloroplast-marker, and nuclear-marker probes; (2) pulse-field gel electrophoresis; and (3) kanamycin screening of sexual progenies. This study suggests that the nuclear expression of the NPTII gene may have been associated with many copies of the psbA-NPTII construction. Very high copy number in the nucleus might either allow NPTII expression from the otherwise inadequate psbA promoter, or might increase the chance of recombining with upstream tobacco regulatory sequences.

Inactivation of a Synechocystis sp strain PCC 6803 gene with homology to conserved chloroplast open reading frame 184 increases the photosystem II-to-photosystem I ratio

A gene of the unicellular cyanobacterium Synechocystis sp strain PCC 6803 that is homologous to the conserved chloroplast open reading frame orf184 has been cloned and sequenced. The nucleotide sequence of the gene predicts a protein of 184 amino acids with a calculated molecular mass of 21.5 kD and two membrane-spanning regions. Amino acid sequence analysis showed 46 to 37% homology of the cyanobacterial orf184 with tobacco orf184, rice orf185, liverwort orf184, and Euglena gracilis orf206 sequences. Two orf184-specific mutants of Synechocystis sp PCC 6803 were constructed by insertion mutagenesis. Cells of mutants showed growth characteristics similar to those of the wild type. Their pigment composition was distinctly different from the wild type, as indicated by an increase in the phycocyanin-to-chlorophyll ratio. In addition, mutants also had a two- to threefold increase in photosynthetic electron transfer rates as well as in photosystem II-to-photosystem I ratio-a phenomenon hitherto not reported for mutants with altered photosynthetic characteristics. The observed alterations in the orf184-specific mutants provide strong evidence for a functional role of the orf184 gene product in photosynthetic processes.

Chloroplast ribosomes and protein synthesis

Consistent with their postulated origin from endosymbiotic cyanobacteria, chloroplasts of plants and algae have ribosomes whose component RNAs and proteins are strikingly similar to those of eubacteria. Comparison of the secondary structures of 16S rRNAs of chloroplasts and bacteria has been particularly useful in identifying highly conserved regions likely to have essential functions. Comparative analysis of ribosomal protein sequences may likewise prove valuable in determining their roles in protein synthesis. This review is concerned primarily with the RNAs and proteins that constitute the chloroplast ribosome, the genes that encode these components, and their expression. It begins with an overview of chloroplast genome structure in land plants and algae and then presents a brief comparison of chloroplast and prokaryotic protein-synthesizing systems and a more detailed analysis of chloroplast rRNAs and ribosomal proteins. A description of the synthesis and assembly of chloroplast ribosomes follows. The review concludes with discussion of whether chloroplast protein synthesis is essential for cell survival.

Efficient targeting of foreign genes into the tobacco plastid genome

The pPRV plasmids are vectors for targeted insertion of foreign genes into the tobacco plastid genome (ptDNA). The vectors are based on the pUC119 plasmid which replicates in E. coli but not in plastids. The spectinomycin resistance (aadA) gene and a multiple cloning site (MCS) are flanked by 1.8-kb and 1.2-kb ptDNA sequences. Biolistic delivery of vector DNA, followed by spectinomycin selection, yields plastid transformants at a reproducible frequency, approximately 1 transplastomic line per bombarded sample. The selected aadA gene and linked non-selectable genes cloned into the MCS are incorporated into the ptDNA by two homologous recombination events via the flanking ptDNA sequences. The transplastomes thus generated are stable, and are maternally transmitted to the seed progeny. The pPRV vector series targets insertions between the divergently transcribed trnV gene and the rps12/7 operon. The lack of readthrough transcription of appropriately oriented transgenes makes the vectors an ideal choice for the study of transgene promoter activity.

Extrachromosomal elements in tobacco plastids

The plastid genome of higher plants is a circular double-stranded DNA molecule which is present in multiple identical copies. We report here an 868-bp plastid DNA minicircle, NICE1, that formed in tobacco (Nicotiana tabacum) plastids during transformation, as an unexpected product of homologous recombination. Such extrachromosomal elements are normally absent in plastids of higher plants. We have constructed shuttle plasmids containing NICE1 sequences which are maintained extrachromosomally when reintroduced into plastids by particle bombardment. Furthermore, recombination between homologous sequences in the shuttle plasmids and the main plastid genome occurs. Recombination products were characterized after recovery of the shuttle plasmids in Escherichia coli and of recombinant plastid genomes in the progeny of transformed plants. Our findings indicate that shuttle plasmids can be used to engineer plastid genes without concomitant integration of foreign DNA and to recover plastid mutations in E. coli.

Characterisation and mode of in vitro replication of pea chloroplast OriA sequences

A partially purified replicative system of pea chloroplast that replicates recombinant DNAs containing pea chloroplast origin sequences has been characterised. Polymerisation by this system is very fast and insensitive to chain terminators like dideoxynucleotides, arabinosylcytosine 5'-triphosphate, etc. Both strands of template DNA are synthesized and single-stranded DNA templates undergo more than one round of replication. When sequences of either of the two chloroplast origins of replication (OriA or OriB) are used as templates, the replicative intermediates are found to have sigma structures. Electron microscopic analysis of the sigma structures restricted with various enzymes reveals that the initiation site of in vitro replication maps near the displacement-loop regions where replication initiates also in vivo. Although the observed replication initiation in the OriA recombinant template is chloroplast-DNA-specific, the mode of replication is different from that observed in vivo with intact ctDNA. However, when the template DNA contains both the OriA and OriB sequences, the in vitro replication proceeds in the theta mode, the mode of replication usually observed in vivo.

Mutations conferring lincomycin, spectinomycin, and streptomycin resistance in Solanum nigrum are located in three different chloroplast genes

A number of Solanum nigrum mutants resistant to the antibiotics spectinomycin, streptomycin and lincomycin have been isolated from regenerating leaf strips after mutagenesis with nitroso-methylurea. Selection of streptomycin- and spectinomycin-resistant mutants has been described earlier. Lincomycin-resistant mutants show resistance to higher levels of the antibiotic than used in the initial selection, and in the most resistant mutant (L17A1) maternal inheritance of the trait was demonstrated. The lincomycin-resistant mutant L17A1 and a streptomycin plus spectinomycin resistant double mutant (StSp1) were chosen for detailed molecular characterisation. Regions of the plastid DNA, within the genes encoding 16S and 23S rRNA and rps12 (3') were sequenced. For spectinomycin and lincomycin resistance, base changes identical to those in similar Nicotiana mutants were identified. Streptomycin resistance is associated with an A-->C change at codon 87 of rps12 (converting a lysine into a glutamine), three codons upstream from a mutation earlier reported for Nicotiana. This site has not previously been implicated in streptomycin resistance mutations of higher plants, but has been found in Escherichia coli. The value of these mutants for studies on plastid genetics is discussed.

Particle bombardment: a universal approach for gene transfer to cells and tissues

In the past year, significant progress in the field of gene transfer has been made possible by refinement of the technique of particle bombardment. The process has been utilized for the study of gene expression in plastids and mitochondria, the production of transgenic crop plants and gene transfer into live animals. Bombarding tissues of live animals with genes that code for antigenic proteins may provide an effective means of vaccination.

DNA Strand-Transfer Activity in Pea (Pisum sativum L.) Chloroplasts

The occurrence of DNA recombination in plastids of higher plants is well documented. However, little is known at the enzymic level. To begin dissecting the biochemical mechanism(s) involved we focused on a key step: strand transfer between homologous parental DNAs. We detected a RecA-like strand transfer activity in stromal extracts from pea (Pisum sativum L.) chloroplasts. Formation of joint molecules requires Mg2+, ATP, and homologous substrates. This activity is inhibited by excess single-stranded DNA (ssDNA), suggesting a necessary stoichiometric relation between enzyme and ssDNA. In a novel assay with Triton X-100-permeabilized chloroplasts, we also detected strand invasion of the endogenous chloroplast DNA by 32P-labeled ssDNA complementary to the 16S rRNA gene. Joint molecules, analyzed by electron microscopy, contained the expected displacement loops.

Chloroplast transformation in plants: polyethylene glycol (PEG) treatment of protoplasts is an alternative to biolistic delivery systems

Nicotiana plumbaginifolia protoplasts were directly transformed by PEG treatment with a cloned 16S rRNA gene isolated from a double antibiotic-resistant Nicotiana tabacum plastid mutant. Putative plastid transformants were selected in cell culture by their spectinomycin resistance and identified by their unselected streptomycin resistance. Alternatively, cell lines were selected in the presence of both antibiotics. The cell line (and its regenerated plants) selected solely for spectinomycin resistance demonstrated an extensive segregation of streptomycin resistance in subsequent tests, while the double-selected line showed stable resistance for both antibiotics. The resistance markers were inherited maternally. In the putative plastid transformants the origin of the resistance mutations was identified by the absence of an AatII site, missing in the donor N. tabacum plastid gene (spectinomycin resistance site) but present in that of wild-type N. plumbaginifolia, and a sequence analysis of the particular nucleotide changes in both resistance sites. Restriction enzyme analysis of total plastid DNA (ptDNA), and the recloning and full sequencing of the fragment introduced, investigated in one of the plastid transformants, showed no DNA rearrangements accompanied with the integration process. Sequence analysis indicated a targeted, homologous integration of the DNA fragment introduced but an unexpectedly complete homology of the parental ptDNA sequences in this region prevented the location of borders. Although the frequency of plastid transformant colonies (2 x 10(-5)) should still be improved, this method for stable chloroplast DNA transformation is comparable with or more efficient than the particle bombardment techniques.

Accumulation of D1 polypeptide in tobacco plastids is regulated via the untranslated region of the psbA mRNA

The plastid psbA mRNA is present in all tissues, while the encoded 32 kDa D1 protein of photosystem II accumulates tissue-specifically and in response to light. To study the regulation of D1 accumulation, a chimeric uidA gene encoding beta-glucuronidase (GUS) under control of the psbA 5'- and 3'-regulatory regions (224 and 393 bp, respectively), was integrated into the tobacco plastid genome. A high level of GUS accumulation in leaves and the lack of GUS in roots, with uidA mRNA present in both tissues, indicated tissue-specific accumulation of the chimeric gene product. Light-regulated accumulation of GUS in seedlings was shown. (i) Light-induced accumulation (100-fold) of GUS in etiolated cotyledons was accompanied by only a modest increase in mRNA levels. (ii) Inhibition of GUS synthesis was observed in cotyledons when light-grown seedlings were transferred to the dark, with no reduction in mRNA levels. Tissue-specific and light-regulated accumulation of GUS indicates that D1 accumulation is controlled via cis-acting regulatory elements in the untranslated region of the psbA mRNA. We propose that in tobacco, control of translation initiation is the primary mechanism regulating D1 protein accumulation.

High-frequency plastid transformation in tobacco by selection for a chimeric aadA gene

We report here a 100-fold increased frequency of plastid transformation in tobacco by selection for a chimeric aadA gene encoding aminoglycoside 3"-adenylyltransferase, as compared with that obtained with mutant 16S rRNA genes. Expression of aadA confers resistance to spectinomycin and streptomycin. In transforming plasmid pZS197, a chimeric aadA is cloned between rbcL and open reading frame ORF512 plastid gene sequences. Selection was for spectinomycin resistance after biolistic delivery of pZS197 DNA into leaf cells. DNA gel-blot analysis confirmed incorporation of the chimeric aadA gene into the plastid genome by two homologous recombination events via the flanking plastid gene sequences. The chimeric gene became homoplasmic in the recipient cells and is uniformly transmitted to the maternal seed progeny. The ability to transform routinely plastids of land plants opens the way to manipulate the process of photosynthesis and to incorporate novel genes into the plastid genome of crops.