Safe for Generations to Come

Problems in evaluating the health impacts of radio frequency radiation

In an effort to clarify the nature of causal evidence regarding the potential impacts of RFR on biological systems, this paper relies on a well-established framework for considering causation expanded from that of Bradford Hill, that combines experimental and epidemiological evidence on carcinogenesis of RFR. The Precautionary Principle, while not perfect, has been the effective lodestone for establishing public policy to guard the safety of the general public from potentially harmful materials, practices or technologies. Yet, when considering the exposure of the public to anthropogenic electromagnetic fields, especially those arising from mobile communications and their infrastructure, it seems to be ignored. The current exposure standards recommended by the Federal Communications Commission (FCC) and International Commission on Non-Ionizing Radiation Protection (ICNIRP) consider only thermal effects (tissue heating) as potentially harmful. However, there is mounting evidence of non-thermal effects of exposure to electromagnetic radiation in biological systems and human populations. We review the latest literature on in vitro and in vivo studies, on clinical studies on electromagnetic hypersensitivity, as well as the epidemiological evidence for cancer due to the action of mobile based radiation exposure. We question whether the current regulatory atmosphere truly serves the public good when considered in terms of the Precautionary Principle and the principles for deducing causation established by Bradford Hill. We conclude that there is substantial scientific evidence that RFR causes cancer, endocrinological, neurological and other adverse health effects. In light of this evidence the primary mission of public bodies, such as the FCC to protect public health has not been fulfilled. Rather, we find that industry convenience is being prioritized and thereby subjecting the public to avoidable risks.

Parameter variation effects on millimeter wave dosimetry based on precise skin thickness in real rats

This study presents a parametric analysis of the steady-state temperature elevation in rat skin models due to millimeter wave exposure at frequencies from 6-100 GHz. The statistical data of the thickness of skin layers, namely epidermis, dermis, dermal white adipose tissue, and panniculus carnosus, were measured for the first time using the excised tissues of real male Sprague-Dawley rats. Based on the precise structure obtained from the histological analysis of rat skin, we solve the bioheat transfer equation to investigate the effects of changes in parameters, such as body parts and thermal constants, on the absorbed power density and temperature elevation of biological tissues. Owing to the notably thin dermal white adipose tissue layer, the surface temperature elevation in the rat head and dorsal skin at 6-100 GHz is 52.6-32.3% and 83.3-58.8% of the average values of different human skin models, respectively. Our results also reveal that the surface temperature elevation of rat skin may correlate with the tissue thickness and deep blood perfusion rates.

Machine learning-assisted antenna modelling for realistic assessment of incident power density on non-planar surfaces above 6 GHz

In this paper, the analysis of exposure reference levels is performed for the case of a half-wavelength dipole antenna positioned in the immediate vicinity of non-planar body parts. The incident power density (IPD) spatially averaged over the spherical and cylindrical surface is computed at the 6-90 GHz range, and subsequently placed in the context of the current international guidelines and standards for limiting exposure to electromagnetic (EM) fields which are defined considering planar computational tissue models. As numerical errors are ubiquitous at such high frequencies, the spatial resolution of EM models needs to be increased which in turn results in increased computational complexity and memory requirements. To alleviate this issue, we hybridise machine learning and traditional scientific computing approaches through differentiable programming paradigm. Findings demonstrate a strong positive effect the curvature of non-planar models has on the spatially averaged IPD with up to 15% larger values compared to the corresponding planar model in considered exposure scenarios.

Compact Wearable Antenna with Metasurface for Millimeter-Wave Radar Applications

Three metasurfaces (MTS) are designed to be combined with a series end-fed 1 × 10 array antenna with a modified Dolph-Chebyshev distribution for imaging applications in the millimeter frequency range, 24.05-24.25 GHz. A reduction in secondary lobes and an increase in FTBR can be achieved while preserving gain, radiation efficiency, SLL and size using an MTS-array combination. Moreover, as a result of each single-layer MTS-array combination, operation bandwidth is widened, with gain and radiation efficiency enhancement. The overall devices' size is 86.8 × 12 × 0.762 mm³. The envisioned application is collision avoidance in aid to visually impaired people at a medium-long distance.

Millimeter (MM) wave and microwave frequency radiation produce deeply penetrating effects: the biology and the physics

Millimeter wave (MM-wave) electromagnetic fields (EMFs) are predicted to not produce penetrating effects in the body. The electric but not magnetic part of MM-EMFs are almost completely absorbed within the outer 1 mm of the body. Rodents are reported to have penetrating MM-wave impacts on the brain, the myocardium, liver, kidney and bone marrow. MM-waves produce electromagnetic sensitivity-like changes in rodent, frog and skate tissues. In humans, MM-waves have penetrating effects including impacts on the brain, producing EEG changes and other neurological/neuropsychiatric changes, increases in apparent electromagnetic hypersensitivity and produce changes on ulcers and cardiac activity. This review focuses on several issues required to understand penetrating effects of MM-waves and microwaves: 1. Electronically generated EMFs are coherent, producing much higher electrical and magnetic forces then do natural incoherent EMFs. 2. The fixed relationship between electrical and magnetic fields found in EMFs in a vacuum or highly permeable medium such as air, predicted by Maxwell's equations, breaks down in other materials. Specifically, MM-wave electrical fields are almost completely absorbed in the outer 1 mm of the body due to the high dielectric constant of biological aqueous phases. However, the magnetic fields are very highly penetrating. 3. Time-varying magnetic fields have central roles in producing highly penetrating effects. The primary mechanism of EMF action is voltage-gated calcium channel (VGCC) activation with the EMFs acting via their forces on the voltage sensor, rather than by depolarization of the plasma membrane. Two distinct mechanisms, an indirect and a direct mechanism, are consistent with and predicted by the physics, to explain penetrating MM-wave VGCC activation via the voltage sensor. Time-varying coherent magnetic fields, as predicted by the Maxwell-Faraday version of Faraday's law of induction, can put forces on ions dissolved in aqueous phases deep within the body, regenerating coherent electric fields which activate the VGCC voltage sensor. In addition, time-varying magnetic fields can directly put forces on the 20 charges in the VGCC voltage sensor. There are three very important findings here which are rarely recognized in the EMF scientific literature: coherence of electronically generated EMFs; the key role of time-varying magnetic fields in generating highly penetrating effects; the key role of both modulating and pure EMF pulses in greatly increasing very short term high level time-variation of magnetic and electric fields. It is probable that genuine safety guidelines must keep nanosecond timescale-variation of coherent electric and magnetic fields below some maximum level in order to produce genuine safety. These findings have important implications with regard to 5G radiation.

Instruments to measure environmental and personal radiofrequency-electromagnetic field exposures: an update

Modern human populations are exposed to anthropogenic sources of radiofrequency-electromagnetic fields (RF-EMFs), primarily to telecommunication and broadcasting technologies. As a result, ongoing concerns from some members of the public have arisen regarding potential health effects following RF-EMF exposures. In order to monitor human RF-EMF exposures and investigate potential health effects, an objective assessment of RF-EMF exposures is necessary. Accurate dosimetry is essential for any investigation of potential associations between RF-EMF exposure and health effects in human populations. This review updates state-of-the-art knowledge of currently available RF-EMF exposure assessment tools applicable in human epidemiological studies. These tools cater for assessing RF-EMF exposures in human environments; through mobile phone-based tools or other standalone tools. RF-EMF exposure assessment has been significantly improved through the application of some of these tools in recent years.

Monte Carlo Simulation of Clothed Skin Exposure to Electromagnetic Field With Oblique Incidence Angles at 60 GHz

This study presents an investigation of clothed human skin exposure to obliquely incident electromagnetic waves at 60 GHz. We clarified the combined impacts of the cloth material, incidence angle, and polarization on the assessment of transmittance and absorbed power density (APD) at the skin surface. A Monte Carlo simulation was conducted considering the thickness variation of the cloth material and skin tissue. For the case of transverse magnetic™ wave exposure, the transmittance increases with increasing incident angle up to the maximum transmittance angle in the range from 60 to 80°, which is known as the Brewster effects, regardless of textile materials and air gap between cloth and skin. The air gap results in a periodic fluctuation of the APD, where the variation is almost within 1 dB when the incident power density is constant and the incident angle is smaller than 40°. Our results also show that as the air gap increases to 2.5 mm, i.e., half-wavelength at 60 GHz in the air, the APD within the skin surface covered by typical cloth materials increases up to 40% compared with that of bare skin. Although the use of several cloth materials may increase the transmittance and APD in oblique incidence scenarios, all the results of the APD do not exceed the basic restriction for local exposure, demonstrating that the current guidelines for human exposure to electromagnetic fields are appropriate for preventing the excessive exposure at 60 GHz considering the impacts of oblique incidence angles and cloth materials.

Feasibility study on transcutaneous auricular vagus nerve stimulation using millimeter waves

Objective. Electrical stimulation of the auricular vagus nerve is a non-invasive neuromodulation technique that has been used for various conditions, including depression, epilepsy, headaches, and cerebral ischemia. However, unwanted non-vagal nerve stimulations can occur because of diffused stimulations. The objective of this study is to develop a region-specific non-invasive vagus nerve stimulation (VNS) technique using the millimeter wave (MMW) as a stimulus for the auricular branch of the vagus nerve (ABVN).Approach. A numerical simulation was conducted to ascertain whether the MMW could excite the ABVN in the human outer-ear with a millimeter-scale spatial resolution. Additionally, MMW-induced neuronal responses in seven mice were evaluated. Transcutaneous auricular VNS (ta-VNS) was applied to the cymba conchae innervated by the AVBN using a 60-GHz continuous wave (CW). As a control, the auricle's exterior margin was stimulated and referred to as transcutaneous auricular non-vagus nerve stimulation (ta-nonVNS). During stimulation, the local field potential (LFP) in the nucleus tractus solitarii (NTS), an afferent vagal projection site, was recorded simultaneously.Main results. The ta-VNS with a stimulus level of 13 dBm showed a significant increase in the LFP power in the NTS. The mean increases in power (n = 7) in the gamma high and gamma very high bands were 8.6 ± 2.0% and 18.2 ± 5.9%, respectively. However, the ta-nonVNS with a stimulus level of 13 dBm showed a significant decrease in the LFP power in the NTS. The mean decreases in power in the beta and gamma low bands were 11.0 ± 4.4% and 10.8 ± 2.8%, respectively. These findings suggested that MMW stimulation clearly induced a different response according to the presence of ABVN.Significance. Selective auricular VNS is feasible using the MMW. This study provides the basis for the development of a new clinical treatment option using the stimulation of the ta-VNS with a square millimeter spatial resolution.

Meta-analysis of in vitro and in vivo studies of the biological effects of low-level millimetre waves

BACKGROUND

With the roll-out of new technologies such as 5G, there has been renewed community concern regarding the adequacy of research on possible health effects from associated radiofrequency radiation, mainly in the millimetre wave (MMW) band.

OBJECTIVE

We conducted a meta-analysis of in vitro and in vivo studies investigating bioeffects of MMWs at low exposure levels.

METHODS

We identified 107 in vitro and in vivo studies investigating MMWs and biological effects in which the power density employed has been below 100 W/m², which is below the current standards for occupational local exposures. Where possible, we estimated the magnitude of the principal effect reported or set this magnitude to zero in studies reporting no significant effects. We also estimated the quality of the studies, based on a methodology used in previous analyses.

RESULTS

We show a negative correlation between effect size and both power density and specific absorption rate. There was also a significant negative correlation between effect size and quality score. A multivariate analysis revealed that there is an increase in the effect size for certain biological systems being investigated and laboratories in which the work was carried out whilst the quality score for some of these tends to be low. We note that many of the studies were motivated by a desire to elucidate the possible mechanisms in therapeutic devices rather than assessing the safety of telecommunications systems. Finally, it appears that the presence or absence of modulation does not influence the reported effect size.

SIGNIFICANCE

Many of the findings of this meta-analysis have not been reported before and have important implications for overall interpretation of in vitro and in vivo data. Overall, the results of this study do not confirm an association between low-level MMWs and biological effects.

5G mobile networks and health-a state-of-the-science review of the research into low-level RF fields above 6 GHz

The increased use of radiofrequency (RF) fields above 6 GHz, particularly for the 5 G mobile phone network, has given rise to public concern about any possible adverse effects to human health. Public exposure to RF fields from 5 G and other sources is below the human exposure limits specified by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). This state-of-the science review examined the research into the biological and health effects of RF fields above 6 GHz at exposure levels below the ICNIRP occupational limits. The review included 107 experimental studies that investigated various bioeffects including genotoxicity, cell proliferation, gene expression, cell signalling, membrane function and other effects. Reported bioeffects were generally not independently replicated and the majority of the studies employed low quality methods of exposure assessment and control. Effects due to heating from high RF energy deposition cannot be excluded from many of the results. The review also included 31 epidemiological studies that investigated exposure to radar, which uses RF fields above 6 GHz similar to 5 G. The epidemiological studies showed little evidence of health effects including cancer at different sites, effects on reproduction and other diseases. This review showed no confirmed evidence that low-level RF fields above 6 GHz such as those used by the 5 G network are hazardous to human health. Future experimental studies should improve the experimental design with particular attention to dosimetry and temperature control. Future epidemiological studies should continue to monitor long-term health effects in the population related to wireless telecommunications.

Circulating Nurse Assistant: Non-Contact Body Centric Gesture Recognition Towards Reducing Latrogenic Contamination

Iatrogenic contamination causes serious health threats to both patients and healthcare staff. Contact operation is an important transmission route for nosocomial infection. Reducing direct contact during medical treatment can reduce nosocomial infection quickly and effectively. Scientific and technological progress in the 5G era brings new solutions to the problem of iatrogenic contamination. We conducted experiments at 27 GHz and 37 GHz to achieve contactless gesture recognition through the bornprint of body centric channel. The original channel S-parameters can achieve 82% (27 GHz) and 89% (37 GHz) basic recognition accuracy through simple statistical analysis. Basic switch recognition and multi-gesture selection recognition can meet the common operation requirements of circulating nurses, greatly reducing contact operations and reducing the probability of cross-contamination. Fully physically isolated body centric channel gesture sensing provides a new entry point for reducing iatrogenic contamination.

Age-dependence of electromagnetic power and heat deposition in near-surface tissues in emerging 5G bands

With the development of 5th generation (5G) mobile networks people of different ages will be exposed in the upper part of the microwave spectrum. From the perspective of non-ionizing radiation dosimetry, an accurate analysis of age-dependent electromagnetic power deposition and resulting heating is required. In this study, we evaluate the effect of age on exposure at 26 GHz and 60 GHz. A near-surface tissue model illuminated by a plane wave is used to asses the exposure considering both frequency-independent and frequency-dependent limits. The age-related variation of the skin thickness and tissue electromagnetic properties has been considered. Moreover, the blood flow decrease rate has been taken into account to assess the age-dependent heating. Our results demonstrate that the overall variations of the power density, specific absorption rate (SAR) and heating in the near-surface tissues are limited to about 10–15%. These variations are mainly due to the tissue permittivity and blood flow change with age. In contrast to the transmitted power density that increases with age, the peak SAR decreases at both frequencies. The peak steady-state heating increases from 5 to 70 years old by roughly 11% at 26 GHz and 13% at 60 GHz.

Numerical Analysis of Electromagnetic Field Exposure from 5G Mobile Communications at 28 GHZ in Adults and Children Users for Real-World Exposure Scenarios

The recent development of millimeter-wave (mmW) technologies, such as the fifth-generation (5G) network, comes with concerns related to user exposure. A quite large number of dosimetry studies above 6 GHz have been conducted, with the main purpose being to establish the correlation between different dosimetric parameters and the skin surface temperature elevation. However, the dosimetric studies from 28 GHz user equipment using different voxel models have not been comprehensively discussed yet. In this study, we used the finite-difference time-domain (FDTD) method for the estimation of the absorption of radiofrequency (RF) energy from a microstrip patch antenna array (28 GHz) in different human models. Specifically, we analyzed different exposure conditions simulating three real common scenarios (a phone call scenario, message writing scenario, and browsing scenario) regarding the use of smartphones/tablets by four different individuals (adult male and female, child male and female). From the results of Absorbed Power Density (Sab), it is possible to conclude that all the considered exposure scenarios comply with the safety limits, both for adult and children models. However, the high values of the local Specific Absorption Rate (SAR) in the superficial tissues and the slight differences in its distribution between adults and children suggest the need for further and more detailed analysis.

Assessment of absorbed power density and temperature rise for nonplanar body model under electromagnetic exposure above 6 GHz

The averaged absorbed power density (APD) and temperature rise in body models with nonplanar surfaces were computed for electromagnetic exposure above 6 GHz. Different calculation schemes for the averaged APD were investigated. Additionally, a novel compensation method for correcting the heat convection rate on the air/skin interface in voxel human models was proposed and validated. The compensation method can be easily incorporated into bioheat calculations and does not require information regarding the normal direction of the boundary voxels, in contrast to a previously proposed method. The APD and temperature rise were evaluated using models of a two-dimensional cylinder and a three-dimensional partial forearm. The heating factor, which was defined as the ratio of the temperature rise to the APD, was calculated using different APD averaging schemes. Our computational results revealed different frequency and curvature dependences. For body models with curvature radii of >30 mm and at frequencies of >20 GHz, the differences in the heating factors among the APD schemes were small.

Physiological effects of millimeter-waves on skin and skin cells: an overview of the to-date published studies

The currently ongoing deployment if the fifth generation of the wireless communication technology, the 5G technology, has reignited the health debate around the new kind of radiation that will be used/emitted by the 5G devices and networks - the millimeter-waves. The new aspect of the 5G technology, that is of concern to some of the future users, is that both, antennas and devices will be continuously in a very close proximity of the users' bodies. Skin is the only organ of the human body, besides the eyes, that will be directly exposed to the mm-waves of the 5G technology. However, the whole scientific evidence on the possible effects of millimeter-waves on skin and skin cells, currently consists of only some 99 studies. This clearly indicates that the scientific evidence concerning the possible effects of millimeter-waves on humans is insufficient to devise science-based exposure limits and to develop science-based human health policies. The sufficient research has not been done and, therefore, precautionary measures should be considered for the deployment of the 5G, before the sufficient number of quality research studies will be executed and health risk, or lack of it, scientifically established.

Separable MSE-Based Design of Two-Way Multiple-Relay Cooperative MIMO 5G Networks

While the combination of multi-antenna and relaying techniques has been extensively studied for Long Term Evolution Advanced (LTE-A) and Internet of Things (IoT) applications, it is expected to still play an important role in 5th Generation (5G) networks. However, the expected benefits of these technologies cannot be achieved without a proper system design. In this paper, we consider the problem of jointly optimizing terminal precoders/decoders and relay forwarding matrices on the basis of the sum mean square error (MSE) criterion in multiple-input multiple-output (MIMO) two-way relay systems, where two multi-antenna nodes mutually exchange information via multi-antenna amplify-and-forward relays. This problem is nonconvex and a local optimal solution is typically found by using iterative algorithms based on alternating optimization. We show how the constrained minimization of the sum-MSE can be relaxed to obtain two separated subproblems which, under mild conditions, admit a closed-form solution. Compared to iterative approaches, the proposed design is more suited to be integrated in 5G networks, since it is computationally more convenient and its performance exhibits a better scaling in the number of relays.

Quasi-Yagi Slotted Array Antenna with Fan-Beam Characteristics for 28 GHz 5G Mobile Terminals

A quasi-Yagi slotted array antenna with fan-beam characteristics is proposed for 28 GHz 5G mobile terminals. The antenna is composed of a 1 × 8 slot antenna array with directors to enhance the half-power beamwidth (HPBW). The proposed antenna has a fan-beam radiation pattern with a simulated HPBW of 256.72° and a peak gain of 11.16 dBi. In addition, the proposed antenna covers ±48° using a beam steering mechanism. Mutual coupling reduction is achieved by inserting slits between the adjacent slot radiators on the ground plane. The simulated −10 dB reflection coefficient bandwidth of the proposed antenna is 1.79 GHz (27.03–28.82 GHz), and the mutual coupling between each of the slot radiators is lower than −25.02 dB over the 28 GHz target band (27.5–28.35 GHz). To investigate the effect of a human body in a practical environment, the power density was considered to estimate the electromagnetic exposure with a simplified skin model. The measured results were in good agreement with the simulated ones and demonstrated that the proposed antenna could be used for 5G mobile terminals.

Sixth Generation (6G) Wireless Networks: Vision, Research Activities, Challenges and Potential Solutions

The standardization activities of the fifth generation communications are clearly over and deployment has commenced globally. To sustain the competitive edge of wireless networks, industrial and academia synergy have begun to conceptualize the next generation of wireless communication systems (namely, sixth generation, (6G)) aimed at laying the foundation for the stratification of the communication needs of the 2030s. In support of this vision, this study highlights the most promising lines of research from the recent literature in common directions for the 6G project. Its core contribution involves exploring the critical issues and key potential features of 6G communications, including: (i) vision and key features; (ii) challenges and potential solutions; and (iii) research activities. These controversial research topics were profoundly examined in relation to the motivation of their various sub-domains to achieve a precise, concrete, and concise conclusion. Thus, this article will contribute significantly to opening new horizons for future research directions.

Exposure Assessment in Millimeter-Wave Reverberation Chamber Using Murine Phantoms

This study deals with the design and calibration of the first mode-stirred reverberation chamber (RC) in the 60-GHz-band adapted for in vivo bioelectromagnetic studies. In addition to the interface for electromagnetic and thermal dosimetry, the interfaces for lighting and ventilation were integrated into the RC walls while preserving acceptable shielding. The RC with mechanical and electronic steering capabilities is characterized in the 55-65 GHz range. To this end, murine skin-equivalent phantoms of realistic shape were designed and fabricated. Their complex permittivity is within ±12% of the target value of murine skin (6.19-j5.81 at 60 GHz). The quality factor of the RC loaded with an animal cage, bedding litter, and five murine phantoms was found to be 1.2 × 10⁴ . The losses inside the RC were analyzed, and it was demonstrated that the main sources of the power dissipation were the phantoms and mice cage. The input power required to reach the average incident power density of 1 and 5 mW/cm² was found to be 0.23 and 1.14 W, respectively. Surface heating of the mice models was measured in the infrared (IR) range using a specifically designed interface, transparent at IR and opaque at millimeter waves (mmW). Experimental results were compared with an analytical solution of the heat transfer equation and to full-wave computations. Analytical and numerical results were in very good agreement with measurements (the relative deviation after 90 min of exposure was within 4.2%). Finally, a parametric study was performed to assess the impact of the thermophysical parameters on the resulting heating. Bioelectromagnetics. 2020;41:121-135. © 2020 Bioelectromagnetics Society.

Model of Steady-state Temperature Rise in Multilayer Tissues Due to Narrow-beam Millimeter-wave Radiofrequency Field Exposure

The assessment of health effects due to localized exposures from radiofrequency fields is facilitated by characterizing the steady-state, surface temperature rise in tissue. A closed-form analytical model was developed that relates the steady-state, surface temperature rise in multilayer planar tissues as a function of the spatial-peak power density and beam dimensions of an incident millimeter wave. Model data was derived from finite-difference solutions of the Pennes bioheat transfer equation for both normal-incidence plane waves and for narrow, circularly symmetric beams with Gaussian intensity distribution on the surface. Monte Carlo techniques were employed by representing tissue layer thicknesses at different body sites as statistical distributions compiled from human data found in the literature. The finite-difference solutions were validated against analytical solutions of the bioheat equation for the plane wave case and against a narrow-beam solution performed using a commercial multiphysics simulation package. In both cases, agreement was within 1-2%. For a given frequency, the resulting analytical model has four input parameters, two of which are deterministic, describing the level of exposure (i.e., the spatial-peak power density and beam width). The remaining two are stochastic quantities, extracted from the Monte Carlo analyses. The analytical model is composed of relatively simple functions that can be programmed in a spreadsheet. Demonstration of the analytical model is provided in two examples: the calculation of spatial-peak power density vs. beam width that produces a predefined maximum steady-state surface temperature, and the performance evaluation of various proposed spatial-averaging areas for the incident power density.

Millimeter Wave Radiation Activates Leech Nociceptors via TRPV1-Like Receptor Sensitization

There is evidence that millimeter waves (MMWs) can have an impact on cellular function, including neurons. Earlier in vitro studies have shown that exposure levels well below the recommended safe limit of 1 mW/cm² cause changes in the action potential (AP) firing rate, resting potential, and AP pulse shape of sensory neurons in leech preparations as well as alter neuronal properties in rat cortical brain slices; these effects differ from changes induced by direct heating. In this article, we compare the responses of thermosensitive primary nociceptors of the medicinal leech under thermal heating and MMW irradiation (80-170 mW/cm² at 60 GHz). The results show that MMW exposure causes an almost twofold decrease in the threshold for activation of the AP compared with thermal heating (3.9 ± 0.4 vs. 8.3 ± 0.4 mV, respectively). Our analysis suggests that MMWs-mediated threshold alterations are not caused by the enhancement of voltage-gated sodium and potassium conductance. We propose that the reduction in AP threshold can be attributed to the sensitization of the transient receptor potential vanilloid 1-like receptor in the leech nociceptor. In silico modeling supported our experimental findings. Our results provide evidence that MMW exposure stimulates specific receptor responses that differ from direct thermal heating, fostering the need for additional studies.

Bioluminescence of Vibrio fischeri: bacteria respond quickly and sensitively to pulsed microwave electric (but not magnetic) fields

Biological systems with intrinsic luminescent properties serve as powerful and noninvasive bioreporters for real-time and label-free monitoring of cell physiology. This study employs the bioluminescent marine bacterium Vibrio fischeri to investigate the effects of separated microwave electric (E) and magnetic (H) fields. Using a cylindrical TM010 mode aluminum resonant cavity, designed to spatially separate E and H fields of a pulsed microwave (2.45 GHz) input, we sampled at 100-ms intervals the 490-nm emission of bioluminescence from suspensions of the V. fischeri. E-field exposure (at 4.24 and 13.4 kV/m) results in rapid and sensitive responses to 100-ms pulses. H-field excitation elicits no measurable responses, even at 100-fold higher power input levels (equivalent to 183 A/m). The observed effects on bacterial light output partially correlate with measured E-field-induced temperature increases. In conclusion, the endogenous bioluminescence of V. fischeri provides a sensitive and noninvasive method to assess the biological effects of microwave fields.

Advances in Computational Human Phantoms and Their Applications in Biomedical Engineering - A Topical Review

Over the past decades, significant improvements have been made in the field of computational human phantoms (CHPs) and their applications in biomedical engineering. Their sophistication has dramatically increased. The very first CHPs were composed of simple geometric volumes, e.g., cylinders and spheres, while current CHPs have a high resolution, cover a substantial range of the patient population, have high anatomical accuracy, are poseable, morphable, and are augmented with various details to perform functionalized computations. Advances in imaging techniques and semi-automated segmentation tools allow fast and personalized development of CHPs. These advances open the door to quickly develop personalized CHPs, inherently including the disease of the patient. Because many of these CHPs are increasingly providing data for regulatory submissions of various medical devices, the validity, anatomical accuracy, and availability to cover the entire patient population is of utmost importance. The article is organized into two main sections: the first section reviews the different modeling techniques used to create CHPs, whereas the second section discusses various applications of CHPs in biomedical engineering. Each topic gives an overview, a brief history, recent developments, and an outlook into the future.

5 G wireless telecommunications expansion: Public health and environmental implications

The popularity, widespread use and increasing dependency on wireless technologies has spawned a telecommunications industrial revolution with increasing public exposure to broader and higher frequencies of the electromagnetic spectrum to transmit data through a variety of devices and infrastructure. On the horizon, a new generation of even shorter high frequency 5G wavelengths is being proposed to power the Internet of Things (IoT). The IoT promises us convenient and easy lifestyles with a massive 5G interconnected telecommunications network, however, the expansion of broadband with shorter wavelength radiofrequency radiation highlights the concern that health and safety issues remain unknown. Controversy continues with regards to harm from current 2G, 3G and 4G wireless technologies. 5G technologies are far less studied for human or environmental effects. It is argued that the addition of this added high frequency 5G radiation to an already complex mix of lower frequencies, will contribute to a negative public health outcome both from both physical and mental health perspectives. Radiofrequency radiation (RF) is increasingly being recognized as a new form of environmental pollution. Like other common toxic exposures, the effects of radiofrequency electromagnetic radiation (RF EMR) will be problematic if not impossible to sort out epidemiologically as there no longer remains an unexposed control group. This is especially important considering these effects are likely magnified by synergistic toxic exposures and other common health risk behaviors. Effects can also be non-linear. Because this is the first generation to have cradle-to-grave lifespan exposure to this level of man-made microwave (RF EMR) radiofrequencies, it will be years or decades before the true health consequences are known. Precaution in the roll out of this new technology is strongly indicated. This article will review relevant electromagnetic frequencies, exposure standards and current scientific literature on the health implications of 2G, 3G, 4G exposure, including some of the available literature on 5G frequencies. The question of what constitutes a public health issue will be raised, as well as the need for a precautionary approach in advancing new wireless technologies.

SAR investigations on the exposure compliance of wearable wireless devices using infrared thermography

Wearable electronics have become the norm over the last few years. Extensive use of wearable wireless devices (WWD) in greater proximity to the body has increased concern about potential biological effects due to the interaction of human tissues with electromagnetic (EM) fields. Human tissues absorb radiofrequency (RF) waves that are capable of affecting energy states at a molecular level, leading to unsafe effects. Remarkably, thermal effect due to the absorption of RF waves is a better biological manifestation than traditional specific absorption rate (SAR) values. In this study, we investigated the application of infrared thermography (IRT) to obtain temperature dynamics and reconstructed average SAR to evaluate the exposure compliance of WWDs. A microstrip-based monopole antenna was used to determine the biological effects of the interaction of EM waves with the body. SAR was obtained using EM field simulations and through reconstruction from thermal measurements with the use of bio-heat equations. The maximum average SAR on the skin was 50 mWkg^-1 for the simulations and 54 mWkg^-1 from reconstruction after IRT experiments. The maximum temperature change in both cases was observed to be less than 1 °C. The difference between the average SAR obtained through IRT and simulation tools was 8.9% on average. SAR determination from the information acquired using IR temperature dynamics can assess bio-compliance of modern wearable devices for various wireless applications. Bioelectromagnetics. 39:451-459, 2018. © 2018 Wiley Periodicals, Inc.

The human skin as a sub-THz receiver - Does 5G pose a danger to it or not?

In the interaction of microwave radiation and human beings, the skin is traditionally considered as just an absorbing sponge stratum filled with water. In previous works, we showed that this view is flawed when we demonstrated that the coiled portion of the sweat duct in upper skin layer is regarded as a helical antenna in the sub-THz band. Experimentally we showed that the reflectance of the human skin in the sub-THz region depends on the intensity of perspiration, i.e. sweat duct's conductivity, and correlates with levels of human stress (physical, mental and emotional). Later on, we detected circular dichroism in the reflectance from the skin, a signature of the axial mode of a helical antenna. The full ramifications of what these findings represent in the human condition are still unclear. We also revealed correlation of electrocardiography (ECG) parameters to the sub-THz reflection coefficient of human skin. In a recent work, we developed a unique simulation tool of human skin, taking into account the skin multi-layer structure together with the helical segment of the sweat duct embedded in it. The presence of the sweat duct led to a high specific absorption rate (SAR) of the skin in extremely high frequency band. In this paper, we summarize the physical evidence for this phenomenon and consider its implication for the future exploitation of the electromagnetic spectrum by wireless communication. Starting from July 2016 the US Federal Communications Commission (FCC) has adopted new rules for wireless broadband operations above 24 GHz (5 G). This trend of exploitation is predicted to expand to higher frequencies in the sub-THz region. One must consider the implications of human immersion in the electromagnetic noise, caused by devices working at the very same frequencies as those, to which the sweat duct (as a helical antenna) is most attuned. We are raising a warning flag against the unrestricted use of sub-THz technologies for communication, before the possible consequences for public health are explored.

Personal Exposimeter for Radiation Assessment in Real Environments in the 60-GHz Band

For the first time, a personal exposimeter (PEX) for 60 GHz radiation measurements is presented. The PEX is designed based on numerical simulations and both on-body and on-phantom calibration measurements to determine the antenna aperture and measurement uncertainty of the PEX. The measurement uncertainty of the PEX is quantified in terms of 50 and 95% prediction intervals of its response. A PEX consisting of three nodes (antennas) with VHH (vertical-horizontal-horizontal) polarization results in a 95% prediction interval of 6.6 dB. A 50% prediction interval of 1.3 dB (factor of 1.3) is obtained for measured power densities which is 3.1 dB lower than a single antenna experiment. The uncertainty is 19.7 dB smaller than that of existing commercial exposimeters at lower frequencies (≤6GHz).