Spatially Resolved MR-Compatible Doppler Ultrasound: Proof of Concept for Triggering of Diagnostic Quality Cardiovascular MRI for Function and Flow Quantification at 3T

Fetal cardiovascular blood flow MRI: techniques and applications

Fetal cardiac MRI is challenging due to fetal and maternal movements as well as the need for a reliable cardiac gating signal and high spatiotemporal resolution. Ongoing research and recent technical developments to address these challenges show the potential of MRI as an adjunct to ultrasound for the assessment of the fetal heart and great vessels. MRI measurements of blood flow have enabled the assessment of normal fetal circulation as well as conditions with disrupted circulations, such as congenital heart disease, along with associated organ underdevelopment and hemodynamic instability. This review provides details of the techniques used in fetal cardiovascular blood flow MRI, including single slice and volumetric imaging sequences, post-processing and analysis, along with a summary of applications in human studies and animal models.

A Thin Transducer With Integrated Acoustic Metamaterial for Cardiac CT Imaging and Gating

Coronary artery disease (CAD) is a leading cause of death globally. Computed tomography coronary angiography (CTCA) is a noninvasive imaging procedure for diagnosis of CAD. However, CTCA requires cardiac gating to ensure that diagnostic-quality images are acquired in all patients. Gating reliability could be improved by utilizing ultrasound (US) to provide a direct measurement of cardiac motion; however, commercially available US transducers are not computed tomography (CT) compatible. To address this challenge, a CT-compatible 2.5-MHz cardiac phased array transducer is developed via modeling, and then, an initial prototype is fabricated and evaluated for acoustic and radiographic performance. This 92-element piezoelectric array transducer is designed with a thin acoustic backing (6.5 mm) to reduce the volume of the radiopaque acoustic backing that typically causes arrays to be incompatible with CT imaging. This thin acoustic backing contains two rows of air-filled, triangular prism-shaped voids that operate as an acoustic diode. The developed transducer has a bandwidth of 50% and a single-element SNR of 9.9 dB compared to 46% and 14.7 dB for a reference array without an acoustic diode. In addition, the acoustic diode reduces the time-averaged reflected acoustic intensity from the back wall of the acoustic backing by 69% compared to an acoustic backing of the same composition and thickness without the acoustic diode. The feasibility of real-time echocardiography using this array is demonstrated in vivo, including the ability to image the position of the interventricular septum, which has been demonstrated to effectively predict cardiac motion for prospective, low radiation CTCA gating.

Perfluorocarbon emulsion enhances MR-ARFI displacement and temperature in vitro: Evaluating the response with MRI, NMR, and hydrophone

Sonosensitive perfluorocarbon F₈TAC₁₈-PFOB emulsion is under development to enhance heating, increase thermal contrast, and reduce treatment times during focused ultrasound tumor ablation of highly perfused tissue. The emulsion previously showed enhanced heating during ex vivo and in vitro studies. Experiments were designed to observe the response in additional scenarios by varying focused ultrasound conditions, emulsion concentrations, and surfactants. Most notably, changes in acoustic absorption were assessed with MR-ARFI. Phantoms were developed to have thermal, elastic, and relaxometry properties similar to those of ex vivo pig tissue. The phantoms were embedded with varying amounts of F₈TAC₁₈-PFOB emulsion or lecithin-PFOB emulsion, between about 0.0-0.3% v:w, in 0.05% v:w increments. MR-ARFI measurements were performed using a FLASH-ARFI-MRT sequence to obtain simultaneous displacement and temperature measurements. A Fabry-Perot hydrophone was utilized to observe the acoustic emissions. Susceptibility-weighted imaging and relaxometry mapping were performed to observe concentration-dependent effects. ¹⁹F diffusion-ordered spectroscopy NMR was used to measure the diffusion coefficient of perfluorocarbon droplets in a water emulsion. Increased displacement and temperature were observed with higher emulsion concentration. In semi-rigid MR-ARFI phantoms, a linear response was observed with low-duty cycle MR-ARFI sonications and a mono-exponential saturating response was observed with sustained sonications. The emulsifiers did not have a significant effect on acoustic absorption in semi-rigid gels. Stable cavitation might also contribute to enhanced heating.

Ultrasonographic assessment of cardiac function and disease severity in coronary heart disease

BACKGROUND

Coronary heart disease (CHD) causes many adverse cardiovascular events and poses a threat to the patient’s health and quality of life.

AIM

To evaluate ultrasonography for evaluation of cardiac function and lesion degree in patients with CHD.

METHODS

A total of 106 patients with CHD (study group) and 106 healthy individuals (control group) in our hospital from March 2019 to September 2020 were selected for this study. All subjects were examined by ultrasound, and the mitral orifice’s early-to-late diastolic blood flow velocity ratio (E/A), left ventricular end-diastolic volume (LVDd), and left atrial diameter (LAD) were measured. Values were compared between the study group and healthy group, and the correlation between the ultrasonic parameters of patients with different cardiac function grades and the degree of CHD were assessed. In addition, the ultrasonic parameters of patients with different prognoses were compared after a follow-up for 6 mo.

RESULTS

E/A (1.46 ± 0.34) of the study group was smaller than that of the control group (1.88 ± 0.44), while LVDd (58.24 ± 5.05 mm) and LAD (43.31 ± 4.38 mm) were larger (48.15 ± 3.93 and 34.94 ± 2.81, respectively; P < 0.05). E/A for patients with grade III disease (1.41 ± 0.43) was smaller and their LVDd (60.04 ± 4.21 mm) and LA (44.16 ± 2.79 mm) were larger than those in patients with grade II disease (1.71 ± 0.48, 52.18 ± 3.67 mm, and 39.68 ± 2.37, respectively; P < 0.05). Patients with grade IV disease had smaller E/A (1.08 ± 0.39) and larger LVDd (66.81 ± 5.39 mm) and LAD (48.81 ± 3.95 mm) than patients with grade II and III disease (P < 0.05). In patients with moderate disease, E/A (1.44 ± 0.41) was smaller and LVDd (59.95 ± 4.14 mm) and LAD (45.15 ± 2.97 mm) were larger than in patients with mild disease (1.69 ± 0.50, 51.97 ± 3.88 and 38.81 ± 2.56 mm, respectively; P < 0.05). In patients with severe disease, E/A (1.13 ± 0.36) was smaller and LVDd (67.70 ± 6.11 mm) and LAD (49.09 ± 4.05 mm) were larger than in patients with moderate disease (P < 0.05). E/A was negatively correlated with cardiac function classification and disease severity, while LVDd and LAD were positively correlated with cardiac function classification and disease severity (P < 0.05). E/A (1.83 ± 0.51) for patients with good prognosis was higher than that for those with poor prognosis (1.39 ± 0.32), while LVDd (49.60 ± 4.39 mm) and LAD (36.13 ± 3.05 mm) were lower (P < 0.05).

CONCLUSION

The ultrasonic parameters of patients with CHD are abnormal, and differ significantly in patients with different cardiac function grades, lesion degree, and prognosis.

A novel matrix-array-based MR-conditional ultrasound system for local hyperthermia of small animals

OBJECTIVE

The goal of this work was to develop a novel modular focused ultrasound hyperthermia (FUS-HT) system for preclinical applications with the following characteristics: MR-compatible, compact probe for integration into a PET/MR small animal scanner, 3D-beam steering capabilities, high resolution focusing for generation of spatially confined FUS-HT effects.

METHODS

For 3D-beam steering capabilities, a matrix array approach with 11 11 elements was chosen. For reaching the required level of integration, the array was mounted with a conductive backing directly on the interconnection PCB. The array is driven by a modified version of our 128 channel ultrasound research platform DiPhAS. The system was characterized using sound field measurements and validated using tissue-mimicking phantoms. Preliminary MR-compatibility tests were performed using a 7T Bruker MRI scanner.

RESULTS

Four 11 11 arrays between 0.5 and 2 MHz were developed and characterized with respect to sound field properties and HT generation. Focus sizes between 1 and 4 mm were reached depending on depth and frequency. We showed heating by 4C within 60 s in phantoms. The integration concept allows a probe thickness of less than 12 mm.

CONCLUSION

We demonstrated FUS-HT capabilities of our modular system based on matrix arrays and a 128 channel electronics system within a 3D-steering range of up to 30. The suitability for integration into a small animal MR could be demonstrated in basic MR-compatibility tests.

SIGNIFICANCE

The developed system presents a new generation of FUS-HT for preclinical and translational work providing safe, reversible, localized, and controlled HT.

Ultrasound-gated computed tomography coronary angiography: Development of ultrasound transducers with improved computed tomography compatibility

PURPOSE

Cardiovascular disease (CVD) is a leading cause of death worldwide, with coronary artery disease (CAD) accounting for nearly half of all CVD deaths. The current gold standard for CAD diagnosis is catheter coronary angiography (CCA), an invasive, expensive procedure. Computed tomography coronary angiography (CTCA) represents an attractive non-invasive alternative to CCA, however, CTCA requires gated acquisition of CT data during periods of minimal cardiac motion (quiescent periods) to avoid non-diagnostic scans. Current gating methods either expose patients to high levels of radiation (retrospective gating) or lead to high rates of non-diagnostic scans (prospective gating) due to the challenge of predicting cardiac quiescence based on ECG alone. Alternatively, ultrasound (US) imaging has been demonstrated as an effective indicator of cardiac quiescence, however, ultrasound transducers produce prominent streak artifacts that disrupt CTCA scans. In this study, a proof-of-concept array transducer with improved CT-compatibility was developed for utilization in an integrated US-CTCA system.

METHODS

Alternative materials were tested radiographically and acoustically to replace the radiopaque acoustic backings utilized in low frequency (1-4 MHz) cardiac US transducers. The results of this testing were used to develop alternative acoustic backings consisting of varying concentrations of aluminum oxide in an epoxy matrix via simulations. On the basis of these simulations, single element test transducers designed to operate at 2.5 MHz were fabricated, and the performance of these devices was characterized via acoustic and radiographic testing with micro-computed tomography (micro-CT). Finally, a first proof-of-concept cardiac phased array transducer was developed and its US imaging performance was evaluated. Micro-CT images of the developed US array with improved CT-compatibility were compared with those of a conventional array.

RESULTS

Materials testing with micro-CT identified an acoustic backing with a measured radiopacity of 1008 HU, more than an order of magnitude lower than that of the acoustic backing (24,000 HU) typically used in cardiac transducers operating in the 1-4 MHz range. When utilized in a simulated transducer design, this acoustic backing yielded a -6-dB fractional bandwidth of 57%, similar to the 54% bandwidth of the transducer with the radiopaque acoustic backing. The developed 2.5 MHz, single element transducer based on these simulations exhibited a fractional bandwidth of 51% and signal-to-noise ratio (SNR) of 14.7 dB. Finally, the array transducer developed with the acoustic backing having decreased radiopacity exhibited a 56% fractional bandwidth and 10.4 dB single channel SNR, with penetration depth >10 cm in phantom and in vivo imaging using the full array.

CONCLUSIONS

The first attempt at developing a CT-compatible ultrasound transducer is described. The developed CT-compatible transducer exhibits improved radiographic compatibility relative to conventional cardiac array transducers with similar SNR, bandwidth, and penetration depth for US imaging, according to phantom and in vivo cardiac imaging. A CT-compatible US transducer might be used to identify cardiac quiescence and prospectively gate CTCA acquisition, reducing challenges associated with current gating approaches, specifically relatively high rates of non-diagnostic scans for prospective ECG gating and high radiation dose for retrospective gating.

Doppler ultrasound cardiac gating of intracranial flow at 7T

BACKGROUND

Ultra-high field magnetic resonance imaging (MR) may be used to improve intracranial blood flow measurements. However, standard cardiac synchronization methods tend to fail at ultra-high field MR. Therefore, this study aims to investigate an alternative synchronization technique using Doppler ultrasound.

METHODS

Healthy subjects (n = 9) were examined with 7T MR. Flow was measured in the M1-branch of the middle cerebral artery (MCA) and in the cerebral aqueduct (CA) using through-plane phase contrast (2D flow). Flow in the circle of Willis was measured with three-dimensional, three-directional phase contrast (4D flow). Scans were gated with Doppler ultrasound (DUS) and electrocardiogram (ECG), and pulse oximetry data (POX) was collected simultaneously. False negative and false positive trigger events were counted for ECG, DUS and POX, and quantitative flow measures were compared.

RESULTS

There were fewer false positive triggers for DUS compared to ECG (5.3 ± 11 vs. 25 ± 31, p = 0.031), while no other measured parameters differed significantly. Net blood flow in M1 was similar between DUS and ECG for 2D flow (1.5 ± 0.39 vs. 1.6 ± 0.41, bias ± 1.96SD: - 0.021 ± 0.36) and 4D flow (1.8 ± 0.48 vs. 9 ± 0.59, bias ± 1.96SD: - 0.086 ± 0.57 ml). Net CSF flow per heart beat in the CA was also similar for DUS and ECG (3.6 ± 2.1 vs. 3.0 ± 5.8, bias ± 1.96SD: 0.61 ± 13.6 μl).

CONCLUSION

Gating with DUS produced fewer false trigger events than using ECG, with similar quantitative flow values. DUS gating is a promising technique for cardiac synchronization at 7T.

Molecular Imaging of a New Multimodal Microbubble for Adhesion Molecule Targeting

Introduction

Inflammation is an important risk-associated component of many diseases and can be diagnosed by molecular imaging of specific molecules. The aim of this study was to evaluate the possibility of targeting adhesion molecules on inflammation-activated endothelial cells and macrophages using an innovative multimodal polyvinyl alcohol-based microbubble (MB) contrast agent developed for diagnostic use in ultrasound, magnetic resonance, and nuclear imaging.

Methods

We assessed the binding efficiency of antibody-conjugated multimodal contrast to inflamed murine or human endothelial cells (ECs), and to peritoneal macrophages isolated from rats with peritonitis, utilizing the fluorescence characteristics of the MBs. Single-photon emission tomography (SPECT) was used to illustrate ^99mTc-labeled MB targeting and distribution in an experimental in vivo model of inflammation.

Results

Flow cytometry and confocal microscopy showed that binding of antibody-targeted MBs to the adhesion molecules ICAM-1, VCAM-1, or E-selectin, expressed on cytokine-stimulated ECs, was up to sixfold higher for human and 12-fold higher for mouse ECs, compared with that of non-targeted MBs. Under flow conditions, both VCAM-1- and E-selectin-targeted MBs adhered more firmly to stimulated human ECs than to untreated cells, while VCAM-1-targeted MBs adhered best to stimulated murine ECs. SPECT imaging showed an approximate doubling of signal intensity from the abdomen of rats with peritonitis, compared with healthy controls, after injection of anti-ICAM-1-MBs.

Conclusions

This novel multilayer contrast agent can specifically target adhesion molecules expressed as a result of inflammatory stimuli in vitro, and has potential for use in disease-specific multimodal diagnostics in vivo using antibodies against targets of interest.

Ultrasound-driven 4D MRI

We present an ultrasound-driven 4D magnetic resonance imaging (US-4DMRI) method for respiratory motion imaging in the thorax and abdomen. The proposed US-4DMRI comes along with a high temporal resolution, and allows for organ motion imaging beyond a single respiratory cycle. With the availability of the US surrogate both inside and outside the MR bore, 4D MR images can be reconstructed for 4D treatment planning and online respiratory motion prediction during radiotherapy. US-4DMRI relies on simultaneously acquired 2D liver US images and abdominal 2D MR multi-slice scans under free respiration. MR volumes are retrospectively composed by grouping the MR slices corresponding to the most similar US images. We present two different US similarity metrics: an intensity-based approach, and a similarity measure relying on predefined fiducials which are being tracked over time. The proposed method is demonstrated on MR liver scans of eight volunteers acquired over a duration of 5.5 min each at a temporal resolution of 2.6 Hz with synchronous US imaging at 14 Hz-17 Hz. Visual inspection of the reconstructed MR volumes revealed satisfactory results in terms of continuity in organ boundaries and blood vessels. In quantitative leave-one-out experiments, both US similarity metrics reach the performance level of state-of-the-art navigator-based approaches.