Biocorrosion caused by microbial biofilms is ubiquitous around us

Handwashing basins and healthcare associated infections: Bacterial diversity in biofilms on faucets and drains

BACKGROUND

Increasingly, hospital handwashing basins have been identified as a source of healthcare-associated infections. Biofilms formed on the faucet and drains of handbasins can potentially harbour pathogenic microbes and promote the dissemination of antimicrobial resistance. However, little is known about the diversity of these biofilm communities and the routes of contamination.

AIM

The aim of this paper was to use 16S rRNA gene amplicon sequencing to investigate the diversity of prokaryote communities present in faucet and drain biofilm samples taken from hospital and residential handbasins.

FINDINGS

The biofilm prokaryotes communities were diverse, with high abundances of potentially corrosive, biofilm forming and pathogenic genera, including those that are not typically waterborne. The β-diversity showed statistically significant differences in the variation of bacterial communities on the basis on building type (hospital vs residential p = 0.0415). However, there was no statistically significant clustering based on sampling site (faucet vs drain p = 0.46). When examining the β-diversity between individual factors, there was a significant difference between drain biofilms of different buildings (hospital drain vs residential drain p = 0.0338).

CONCLUSION

This study demonstrated that biofilms from hospital and residential handbasins contain complex and diverse microbial communities that differ significantly by building type. It also showed biofilms formed on the faucet and drain of a hospital's handbasins were not significantly different. Future research is needed to understand the potential mechanisms of transfer between drains and faucets of hospital handbasins. This information will inform improved infection control guidelines to control this underrecognized source of infections.

Microbial corrosion of metallic biomaterials in the oral environment

A wide variety of microorganisms have been closely linked to metal corrosion in the form of adherent surface biofilms. Biofilms allow the development and maintenance of locally corrosive environments and/or permit direct corrosion including pitting corrosion. The presence of numerous genetically distinct microorganisms in the oral environment poses a threat to the integrity and durability of the surface of metallic prostheses and implants used in routine dentistry. However, the association between oral microorganisms and specific corrosion mechanisms is not clear. It is of practical importance to understand how microbial corrosion occurs and the associated risks to metallic materials in the oral environment. This knowledge is also important for researchers and clinicians who are increasingly concerned about the biological activity of the released corrosion products. Accordingly, the main goal was to comprehensively review the current literature regarding oral microbiologically influenced corrosion (MIC) including characteristics of biofilms and of the oral environment, MIC mechanisms, corrosion behavior in the presence of oral microorganisms and potentially mitigating technologies. Findings included that oral MIC has been ascribed mostly to aggressive metabolites secreted during microbial metabolism (metabolite-mediated MIC). However, from a thermodynamic point of view, extracellular electron transfer mechanisms (EET-MIC) through pili or electron transfer compounds cannot be ruled out. Various MIC mitigating methods have been demonstrated to be effective in short term, but long term evaluations are necessary before clinical applications can be considered. Currently most in-vitro studies fail to simulate the complexity of intraoral physiological conditions which may either reduce or exacerbate corrosion risk, which must be addressed in future studies. STATEMENT OF SIGNIFICANCE: A thorough analysis on literature regarding oral MIC (microbiologically influenced corrosion) of biomedical metallic materials has been carried out, including characteristics of oral environment, MIC mechanisms, corrosion behaviors in the presence of typical oral microorganisms and potential mitigating methods (materials design and surface design). There is currently a lack of mechanistic understanding of oral MIC which is very important not only to corrosion researchers but also to dentists and clinicians. This paper discusses the significance of biofilms from a biocorrosion perspective and summarizes several aspects of MIC mechanisms which could be caused by oral microorganisms. Oral MIC has been closely associated with not only the materials research but also the dental/clinical research fields in this work.

In-situ and label-free measurement of cytochrome C concentration with a Ti2C-MXene sensitized fiber-optic MZI sensor

BACKGROUND

The concentration of cytochrome C is demonstrated to be an effective indicator of the microbial corrosion strength of metals. Traditional cytochrome C sensor can detect cytochrome C with a low detection limit, but their use is limited by their high cost, cumbersome operation, and susceptibility to malignant environments. In addition, studies on the monitoring of cytochrome C in the field of microbial corrosion has still not been carried out. Therefore, there is a need for a highly sensitive, selective, low-cost, anti-interference, and stable cytochrome C sensor with online monitoring and remote sensing capabilities for in-situ measurement of microbial corrosion strength.

RESULTS

This paper proposed a highly sensitive label-free fiber-optic sensor based on Mach-Zehnder interferometer (MZI) for in-situ measurement of the microbial corrosion marker cytochrome C. Two-dimensional Ti2C-MXene material is uniformly immobilized onto the surface of the sensing area to improve the sensitivity, hydrophilicity, and specific surface area of the sensing area, as well as to facilitate the immobilization of specific sensitive materials. The cytochrome C antibody is modified on the surface of Ti2C-MXene to specifically recognize cytochrome C, whose concentration variation can be measured by monitoring the spectral shift of MZI sensor. Results demonstrate a measurement sensitivity of 1.428 nm/μM for cytochrome C concentrations ranging from 0 to 7.04 μM. The detection limit of the sensor is calculated to be 0.392 μM with remarkable performance, including selectivity, stability, and reliability. Besides, the measurement result of the proposed sensor in real microbial corrosive environment is consistent with that of the ideal environment.

SIGNIFICANCE AND NOVELTY

This is the first instance of achieving in-situ and label-free measurement of cytochrome C by using a fiber-optic MZI sensor, which undoubtedly provides a feasible solution for the effective monitoring of microbial metal corrosion in the environment.

The combined effect of carbon starvation and exogenous riboflavin accelerated the Pseudomonas aeruginosa-induced nickel corrosion

The primary objective of this study is to elucidate the synergistic effect of an exogenous redox mediator and carbon starvation on the microbiologically influenced corrosion (MIC) of metal nickel (Ni) by nitrate reducing Pseudomonas aeruginosa. Carbon source (CS) starvation markedly accelerates Ni MIC by P. aeruginosa. Moreover, the addition of exogenous riboflavin significantly decreases the corrosion resistance of Ni. The MIC rate of Ni (based on corrosion loss volume) is ranked as: 10 % CS level + riboflavin > 100 % CS level + riboflavin > 10 % CS level > 100 % CS level. Notably, starved P. aeruginosa biofilm demonstrates greater aggressiveness in contributing to the initiation of surface pitting on Ni. Under CS deficiency (10 % CS level) in the presence of riboflavin, the deepest Ni pits reach a maximum depth of 11.2 μm, and the corrosion current density (icorr) peak at approximately 1.35 × 10-5 A·cm-2, representing a 2.6-fold increase compared to the full-strength media (5.25 × 10-6 A·cm-2). For the 10 % CS and 100 % CS media, the addition of exogenous riboflavin increases the Ni MIC rate by 3.5-fold and 2.9-fold, respectively. Riboflavin has been found to significantly accelerate corrosion, with its augmentation effect on Ni MIC increasing as the CS level decreases. Overall, riboflavin promotes electron transfer from Ni to P. aeruginosa, thus accelerating Ni MIC.

Accelerated corrosion of 316L stainless steel in a simulated oral environment via extracellular electron transfer and acid metabolites of subgingival microbiota

316L stainless steel (SS) is widely applied as microimplant anchorage (MIA) due to its excellent mechanical properties. However, the risk that the oral microorganisms can corrode 316L SS is fully neglected. Microbiologically influenced corrosion (MIC) of 316L SS is essential to the health and safety of all patients because the accelerated corrosion caused by the oral microbiota can trigger the release of Cr and Ni ions. This study investigated the corrosion behavior and mechanism of subgingival microbiota on 316L SS by 16S rRNA and metagenome sequencing, electrochemical measurements, and surface characterization techniques. Multispecies biofilms were formed by the oral subgingival microbiota in the simulated oral anaerobic environment on 316L SS surfaces, significantly accelerating the corrosion in the form of pitting. The microbiota samples collected from the subjects differed in biofilm compositions, corrosion behaviors, and mechanisms. The oral subgingival microbiota contributed to the accelerated corrosion of 316L SS via acidic metabolites and extracellular electron transfer. Our findings provide a new insight into the underlying mechanisms of oral microbial corrosion and guide the design of oral microbial corrosion-resistant materials.

Biochemical and microbiological characterization of a thermotolerant bacterial consortium involved in the corrosion of Aluminum Alloy 7075

Microorganisms can play a significant role in material corrosion, with bacterial biofilms as major participants in microbially influenced corrosion (MIC). The exact mechanisms by which this takes place are poorly understood, resulting in a scarcity of information regarding MIC detection and prevention. In this work, a consortium of moderately thermophilic bacteria isolated from a biofilm growing over aluminum alloy 7075 was characterized. Its effect over the alloy was evaluated on a 40-day period using Electron Microscopy, demonstrating acceleration of corrosion in comparison to the abiotic control. The bacterial consortium was biochemically and microbiologically characterized as an attempt to elucidate factors contributing to corrosion. Molecular analysis revealed that the consortium consisted mainly of members of the Bacillus genus, with lower abundance of other genera such as Thermoanaerobacterium, Anoxybacillus and Paenibacillus. The EPS polysaccharide presented mainly mannose, galactose, rhamnose and ribose. Our observations suggest that the acidification of the culture media resulting from bacterial metabolism acted as the main contributor to corrosion, hinting at an unspecific mechanism. The consortium was not sulfate-reducing, but it was found to produce hydrogen, which could also be a compounding factor for corrosion.

Carbon starvation considerably accelerated nickel corrosion by Desulfovibrio vulgaris

Carbon starvation can affect the activity of microbes, thereby affecting the metabolism and the extracellular electron transfer (EET) process of biofilm. In the present work, the microbiologically influenced corrosion (MIC) behavior of nickel (Ni) was investigated under organic carbon starvation by Desulfovibrio vulgaris. Starved D. vulgaris biofilm was more aggressive. Extreme carbon starvation (0% CS level) reduced weight loss due to the severe weakening of biofilm. The corrosion rate of Ni (based on weight loss) was sequenced as 10% CS level > 50% CS level > 100 CS level > 0% CS level. Moderate carbon starvation (10% CS level) caused the deepest pit of Ni in all the carbon starvation treatments, with a maximal pit depth of 18.8 μm and a weight loss of 2.8 mg·cm-2 (0.164 mm·y-1). The corrosion current density (icorr) of Ni for the 10% CS level was as high as 1.62 × 10-5 A·cm-2, which was approximately 2.9-fold greater than the full-strength medium (5.45 × 10-6 A·cm-2). The electrochemical data corresponded to the corrosion trend revealed by weight loss. The various experimental data rather convincingly pointed to the Ni MIC of D. vulgaris following the EET-MIC mechanism despite a theoretically low Ecell value (+33 mV).

Comparing theoretical and practical biomass yields calls for revisiting thermodynamic growth models for electroactive microorganisms

Research on electroactive microorganisms (EAM) often focuses either on their physiology and the underlying mechanisms of extracellular electron transfer or on their application in microbial electrochemical technologies (MET). Thermodynamic understanding of energy conversions related to growth and activity of EAM has received only a little attention. In this study, we aimed to prove the hypothesized restricted energy harvest of EAM by determining biomass yields by monitoring growth of acetate-fed biofilms presumably enriched in Geobacter, using optical coherence tomography, at three anode potentials and four acetate concentrations. Experiments were concurrently simulated using a refined thermodynamic model for EAM. Neither clear correlations were observed between biomass yield and anode potential nor acetate concentration, albeit the statistical significances are limited, mainly due to the observed experimental variances. The experimental biomass yield based on acetate consumption (YX/ac = 37 ± 9 mgCODbiomass gCODac-1) was higher than estimated by modeling, indicating limitations of existing growth models to predict yields of EAM. In contrast, the modeled biomass yield based on catabolic energy harvest was higher than the biomass yield from experimental data (YX/cat = 25.9 ± 6.8 mgCODbiomass kJ-1), supporting restricted energy harvest of EAM and indicating a role of not considered energy sinks. This calls for an adjusted growth model for EAM, including, e.g., the microbial electrochemical Peltier heat to improve the understanding and modeling of their energy metabolism. Furthermore, the reported biomass yields are important parameters to design strategies for influencing the interactions between EAM and other microorganisms and allowing more realistic feasibility assessments of MET.

Optimization of antimicrobial peptides for the application against biocorrosive bacteria

Microbiologically influenced corrosion is a common problem in the industrial field due to the deterioration of metals in the presence of various microorganisms, in particular sulfate-reducing bacteria (SRB) and sulfur-oxidizing bacteria (SOB). A common method to reduce microbiologically influenced corrosion is the application of biocides. The limited number of suitable biocides and the resulting development of resistance, high dosage, and high application rate hinder an effective application. An environmentally friendly alternative could be the application of antimicrobial peptides (AMP), which have already been established in the field of medical devices for a while. Here, the successful treatment of different AMPs against 3 SRB and 1 SOB was demonstrated. The peptide L5K5W was favored due to its broad activity, high stability, and simple structure resulting in low synthesis costs. An alanine scan showed that substitution of leucine with tryptophan increased the activity of this peptide twofold compared to the original peptide against D. vulgaris, the main representative of SRB. Additional optimization of this modified peptide through changes in amino acid composition and lipidations significantly increased the effectiveness, finally resulting in a minimum inhibitory concentration (MIC) of 15.63 μg/mL against Desulfovibrio vulgaris. Even against the marine SRB Desulfovibrio indonesiensis with a required salt concentration of min. 2%, an activity of the peptides can be observed (MIC: 31.25 μg/mL). The peptides also remained stable and active for 7 days in the supernatant of the bacterial culture. KEY POINTS: • Antimicrobial peptides provide an alternative to combat biocorrosive bacteria. • Optimization of the peptide sequence leads to a significant increase in activity. • The investigated peptides exhibit high stability, both in the medium and in the bacterial supernatant.

Text-Mining to Identify Gene Sets Involved in Biocorrosion by Sulfate-Reducing Bacteria: A Semi-Automated Workflow

A significant amount of literature is available on biocorrosion, which makes manual extraction of crucial information such as genes and proteins a laborious task. Despite the fast growth of biology related corrosion studies, there is a limited number of gene collections relating to the corrosion process (biocorrosion). Text mining offers a potential solution by automatically extracting the essential information from unstructured text. We present a text mining workflow that extracts biocorrosion associated genes/proteins in sulfate-reducing bacteria (SRB) from literature databases (e.g., PubMed and PMC). This semi-automatic workflow is built with the Named Entity Recognition (NER) method and Convolutional Neural Network (CNN) model. With PubMed and PMCID as inputs, the workflow identified 227 genes belonging to several Desulfovibrio species. To validate their functions, Gene Ontology (GO) enrichment and biological network analysis was performed using UniprotKB and STRING-DB, respectively. The GO analysis showed that metal ion binding, sulfur binding, and electron transport were among the principal molecular functions. Furthermore, the biological network analysis generated three interlinked clusters containing genes involved in metal ion binding, cellular respiration, and electron transfer, which suggests the involvement of the extracted gene set in biocorrosion. Finally, the dataset was validated through manual curation, yielding a similar set of genes as our workflow; among these, hysB and hydA, and sat and dsrB were identified as the metal ion binding and sulfur metabolism genes, respectively. The identified genes were mapped with the pangenome of 63 SRB genomes that yielded the distribution of these genes across 63 SRB based on the amino acid sequence similarity and were further categorized as core and accessory gene families. SRB's role in biocorrosion involves the transfer of electrons from the metal surface via a hydrogen medium to the sulfate reduction pathway. Therefore, genes encoding hydrogenases and cytochromes might be participating in removing hydrogen from the metals through electron transfer. Moreover, the production of corrosive sulfide from the sulfur metabolism indirectly contributes to the localized pitting of the metals. After the corroboration of text mining results with SRB biocorrosion mechanisms, we suggest that the text mining framework could be utilized for genes/proteins extraction and significantly reduce the manual curation time.

R-based method for quantitative analysis of biofilm thickness by using confocal laser scanning microscopy

Microscopy is mostly the method of choice to analyse biofilms. Due to the high local heterogeneity of biofilms, single and punctual analyses only give an incomplete insight into the local distribution of biofilms. In order to retrieve statistically significant results a quantitative method for biofilm thickness measurements was developed based on confocal laser scanning microscopy and the programming language R. The R-script allows the analysis of large image volumes with little hands-on work and outputs statistical information on homogeneity of surface coverage and overall biofilm thickness. The applicability of the script was shown in microbial fuel cell experiments. It was found that Geobacter sulfurreducens responds differently to poised anodes of different material so that the optimum potential for MFC on poised ITO anodes had to be identified with respect to maximum current density, biofilm thickness and MFC start-up time. Thereby, a positive correlation between current density and biofilm thickness was found, but with no direct link to the applied potential. The optimum potential turned out to be +0.1 V versus SHE. The script proved to be a valuable stand-alone tool to quantify biofilm thickness in a statistically valid manner, which is required in many studies.

Marine biofilms: diversity, interactions and biofouling

Marine biofilms are ubiquitous in the marine environment. These complex microbial communities rapidly respond to environmental changes and encompass hugely diverse microbial structures, functions and metabolisms. Nevertheless, knowledge is limited on the microbial community structures and functions of natural marine biofilms and their influence on global geochemical cycles. Microbial cues, including secondary metabolites and microbial structures, regulate interactions between microorganisms, with their environment and with other benthic organisms, which affects their community succession and metamorphosis. Furthermore, marine biofilms are key mediators of marine biofouling, which greatly affect marine industries. In this Review, we discuss marine biofilm dynamics, including their diversity, abundance and functions. We also highlight knowledge gaps, areas for future research and potential biotechnological applications of marine biofilms.

Influence of nutrition on Cu corrosion by Desulfovibrio vulgaris in anaerobic environment

The eutrophication of seawater is not only harmful to the environment, but also influence microbes' proliferation and then influence biocorrosion of marine engineering materials to a great extent. This study investigated the microbiologically influenced corrosion (MIC) of Cu immersed in the Desulfovibrio vulgaris (a sulfate reducing bacterium) medium with four defined nutritional degrees: total nutrition, P lacking, N lacking, and P&N lacking. When D. vulgaris was cultured in more nutritional medium, more H2S was generated and more serious corrosion of Cu occurred. The concentration of H2S corresponding to the medium with total nutrition was as high as 4.9 × 104(±913.0) ppm. The weight loss of Cu in medium with total nutrition increased by at least 50% compared with other nutritional conditions. The depth of pitting pits on Cu increased obviously with more abundant nutrient elements N and P. The electrochemical tests supported the weight loss and also showed that an obvious passivation zone was formed on the anodic polarization curve. This indicated that a protective film was formed on the surface of Cu against uniform corrosion. The analyses of thermodynamics and experiment data indicated that metabolite MIC (M-MIC) account for the Cu corrosion by D. vulgaris.

Limiting nitrate triggered increased EPS film but decreased biocorrosion of copper induced by Pseudomonas aeruginosa

Biocorrosion of Cu remains a significant challenge in marine engineering but the mechanism is still not clear. The nutrients in marine environment affect the microbe's growth and the formation of biofilm, and then affect biocorrosion of metal to a large extent. In this study, the effect of NO3- concentration in Pseudomonas aeruginosa (P. aeruginosa) medium on the formation of extracellular polymer substance (EPS) film and biocorrosion of Cu were studied. The experiments results showed that limiting NO3- in culture medium triggered increased EPS film but decreased biocorrosion of Cu induced by P. aeruginosa. With increase of NO3- content in the culture medium, the Cu surface attached less polysaccharides and proteins, but the Cu corrosion rate was accelerated. The weight loss of Cu and the maximum pit depth were both increased with increase of NO3- content. The XPS and XRD analyses indicated that the major corrosion product is Cu2O. The increased corrosion rate with increase of the NO3- level were attributed to the EET-MIC route, the formation of Cu(NH3)2+, and the more loose EPS film.