Progress in melanoma modelling in vitro

Targeting the Complexity of In Vitro Skin Models: A Review of Cutting-Edge Developments

Skin in vitro models offer much promise for research, testing drugs, cosmetics, and medical devices, reducing animal testing and extensive clinical trials. There are several in vitro approaches to mimicking human skin behavior, ranging from simple cell monolayer to complex organotypic and bioengineered 3-dimensional models. Some have been approved for preclinical studies in cosmetics, pharmaceuticals, and chemicals. However, development of physiologically reliable in vitro human skin models remains in its infancy. This review reports on advances in in vitro complex skin models to study skin homeostasis, aging, and skin disease.

Biofabrication and Monitoring of a 3D Printed Skin Model for Melanoma

There is an unmet need for in vitro cancer models that emulate the complexity of human tissues. 3D-printed solid tumor micromodels based on decellularized extracellular matrices (dECMs) recreate the biomolecule-rich matrix of native tissue. Herein a 3D in vitro metastatic melanoma model that is amenable for drug screening purposes and recapitulates features of both the tumor and the skin microenvironment is described. Epidermal, basement membrane, and dermal biocompatible inks are prepared by means of combined chemical, mechanical, and enzymatic processes. Bioink printability is confirmed by rheological assessment and bioprinting, and bioinks are subsequently combined with melanoma cells and dermal fibroblasts to build complex 3D melanoma models. Cells are tracked by confocal microscopy and surface-enhanced Raman spectroscopy (SERS) mapping. Printed dECMs and cell tracking allow modeling of the initial steps of metastatic disease, and may be used to better understand melanoma cell behavior and response to drugs.

The influence of viscosity of hydrogels on the spreading and migration of cells in 3D bioprinted skin cancer models

Various in vitro three-dimensional (3D) tissue culture models of human and diseased skin exist. Nevertheless, there is still room for the development and improvement of 3D bioprinted skin cancer models. The need for reproducible bioprinting methods, cell samples, biomaterial inks, and bioinks is becoming increasingly important. The influence of the viscosity of hydrogels on the spreading and migration of most types of cancer cells is well studied. There are however limited studies on the influence of viscosity on the spreading and migration of cells in 3D bioprinted skin cancer models. In this review, we will outline the importance of studying the various types of skin cancers by using 3D cell culture models. We will provide an overview of the advantages and disadvantages of the various 3D bioprinting technologies. We will emphasize how the viscosity of hydrogels relates to the spreading and migration of cancer cells. Lastly, we will give an overview of the specific studies on cell migration and spreading in 3D bioprinted skin cancer models.

Modulation of Epithelial-Mesenchymal Transition Is a Possible Underlying Mechanism for Inducing Chemoresistance in MIA PaCa-2 Cells against Gemcitabine and Paclitaxel

To elucidate the currently unknown molecular mechanisms responsible for the similarity and difference during the acquirement of resistance against gemcitabine (GEM) and paclitaxel (PTX) in patients with pancreatic carcinoma, we examined two-dimensional (2D) and three-dimensional (3D) cultures of parent MIA PaCa-2 cells (MIA PaCa-2-PA) and their GEM resistance cell line (MIA PaCa-2-GR) and PTX resistance (MIA PaCa-2-PR). Using these cells, we examined 3D spheroid configurations and cellular metabolism, including mitochondrial and glycolytic functions, with a Seahorse bio-analyzer and RNA sequencing analysis. Compared to the MIA PaCa-2-PA, (1) the formation of the 3D spheroids of MIA PaCa-2-GR or -PR was much slower, and (2) their mitochondrial and glycolytic functions were greatly modulated in MIA PaCa-2-GR or -PR, and such metabolic changes were also different between their 2D and 3D culture conditions. RNA sequencing and bioinformatic analyses of the differentially expressed genes (DEGs) using an ingenuity pathway analysis (IPA) suggested that various modulatory factors related to epithelial -mesenchymal transition (EMT) including STAT3, GLI1, ZNF367, NKX3-2, ZIC2, IFIT2, HEY1 and FBLX, may be the possible upstream regulators and/or causal network master regulators responsible for the acquirement of drug resistance in MIA PaCa-2-GR and -PR. In addition, among the prominently altered DEGs (Log2 fold changes more than 6 or less than -6), FABP5, IQSEC3, and GASK1B were identified as unique genes associated with their antisense RNA or pseudogenes, and among these, FABP5 and GASK1B are known to function as modulators of cancerous EMT. Therefore, the observations reported herein suggest that modulations of cancerous EMT may be key molecular mechanisms that are responsible for inducing chemoresistance against GEM or PTX in MIA PaCa-2 cells.

Significant and Various Effects of ML329-Induced MITF Suppression in the Melanoma Cell Line

To study the inhibitory effects on microphthalmia-associated transcription factor (MITF)-related biological aspects in malignant melanomas (MMs) in the presence or absence of the low-molecular MITF specific inhibitor ML329, cell viability, cellular metabolic functions, and three-dimensional (3D) spheroid formation efficacy were compared among MM cell lines including SK-mel-24, A375, dabrafenib- and trametinib-resistant A375 (A375DT), and WM266-4. Upon exposure to 2 or 10 μM of ML329, cell viability was significantly decreased in WM266-4, SK-mel-24, and A375DT cells, but not A375 cells, in a dose-dependent manner, and these toxic effects of ML329 were most evident in WM266-4 cells. Extracellular flux assays conducted using a Seahorse bioanalyzer revealed that treatment with ML329 increased basal respiration, ATP-linked respiration, proton leakage, and non-mitochondrial respiration in WM266-4 cells and decreased glycolytic function in SK-mel-24 cells, whereas there were no marked effects of ML329 on A375 and A375DT cells. A glycolytic stress assay under conditions of high glucose concentrations also demonstrated that the inhibitory effect of ML329 on the glycolytic function of WM266-4 cells was dose-dependent. In addition, ML329 significantly decreased 3D-spheroid-forming ability, though the effects of ML329 were variable among the MM cell lines. Furthermore, the mRNA expression levels of selected genes, including STAT3 as a possible regulator of 3D spheroid formation, KRAS and SOX2 as oncogenic-signaling-related factors, PCG1a as the main regulator of mitochondrial biogenesis, and HIF1a as a major hypoxia transcriptional regulator, fluctuated among the MM cell lines, possibly supporting the diverse ML329 effects mentioned above. The findings of diverse ML329 effects on various MM cell lines suggest that MITF-associated biological activities are different among various types of MM.

3D human foreskin model for testing topical formulations of sildenafil citrate

Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.

Revisiting the Role of B-RAF Kinase as a Therapeutic Target in Melanoma

Malignant melanoma is the rarest but most aggressive and deadly skin cancer. Melanoma is the result of a malignant transformation of melanocytes, which leads to their uncontrolled proliferation. Mutations in the mitogen-activated protein kinase (MAPK) pathway, which are crucial for the control of cellular processes, such as apoptosis, division, growth, differentiation, and migration, are one of its most common causes. BRAF kinase, as one of the known targets of this pathway, has been known for many years as a prominent molecular target in melanoma therapy, and the following mini-review outlines the state-of-the-art knowledge regarding its structure, mutations and mechanisms.

Three-dimensional, PEG-based hydrogels induce spheroid formation and enhance viability of A2058 melanoma cells

Traditional drug screening methods use monolayer (2D) tumor cell cultures, which lack basic features of tumor complexity. As an alternative, 3D hydrogels have begun to emerge as simple, time-, and cost-saving systems. One of the most promising candidates, synthetic alkoxysilane-PEG (polyethylene glycol)-based hydrogels, are formed by "sol-gel" polymerization in an aqueous medium, which allows control over the incorporated elements. Our aims were to optimize siloxane-PEG hydrogels for three different cell lines of skin origin and utilize these 3D hydrogels as a feasible drug (e.g., daunorubicin) screening assay. A drastic increase in survival and the formation of cellular aggregates (spheroids) could be observed in A2058 melanoma cells, but not in keratinocyte and endothelial cell lines. A deep-learning neural network was trained to recognize and distinguish between the cellular formations and allowed the fast processing of hundreds of microscopic images. We developed an artificial intelligence (AI)-assisted application (https://github.com/enyecz/CancerDetector2), which indicated that, in terms of average area of the spheroids treated with daunorubicin, A2058 melanoma cell 3D aggregates have better survival in a hydrogel containing 15% bis-mono-ethoxysilane-PEG.

A layered cancer-on-a-chip system for anticancer drug screening and disease modeling

Recent advances in the development of microfluidic systems for the culture of complex and three-dimensional cell, tissue, and organ models allow their use in toxicity studies and mimicking many diseases. These types of in vitro models are important because of the huge advantages over standard two-dimensional cell cultures: better mimicking of in vivo conditions and more reliable response to the tested drugs. This report presents a new approach to modeling skin cancer (melanoma-on-a-chip) and breast cancer (breast cancer-on-a-chip) using the microfluidic systems. We designed a microfluidic device to co-culture cancer cells with non-malignant cells, which are the main component of the cancer microenvironment. In the construction of the microsystem, we used a scaffold in the form of a porous membrane made of poly(ethylene terephthalate), which enables the regular and reproducible arrangement of cells in the culture and maintains intercellular communication. To demonstrate the functionality of the microsystem, we used it to analyze the effectiveness of photodynamic therapy in the treatment of melanoma and chemotherapy in the treatment of breast cancer. The developed microsystem can be successfully used to model cancer diseases, especially with a layered arrangement of cells in the cancerous tissue, such as melanoma, ductal breast cancer, or breast cancer metastases to the skin.

Physical Properties and Cellular Metabolic Characteristics of 3D Spheroids Are Possible Definitive Indices for the Biological Nature of Cancer-Associated Fibroblasts

The current study's objective was to elucidate some currently unknown biological indicators to evaluate the biological nature of cancer-associated fibroblasts (CAFs). For this purpose, four different CAFs, CAFS1, CAFS2, SCC17F and MO-1000, were established using surgical specimens from oral squamous cell carcinomas (OSCC) with different clinical malignant stages (CAFS1 and CAFS2, T2N0M0, stage II; SCC17F and MO-1000, T4aN2bM0, stage IVA). Fibroblasts unrelated to cancer (non-CAFs) were also prepared and used as controls. Initially, confirmation that these four fibroblasts were indeed CAFs was obtained by their mRNA expression using positive and negative markers for the CAF or fibroblasts. To elucidate possible unknown biological indicators, these fibroblasts were subjected to a cellular metabolic analysis by a Seahorse bioanalyzer, in conjugation with 3D spheroid cultures of the cells and co-cultures with a pancreas ductal carcinoma cell line, MIA PaCa-2. The mitochondrial and glycolytic functions of human orbital fibroblasts (HOF) were nearly identical to those of Graves'-disease-related HOF (GOF). In contrast, the characteristics of the metabolic functions of these four CAFs were different from those of human conjunctival fibroblasts (HconF), a representative non-CAF. It is particularly noteworthy that CAFS1 and CAFS2 showed markedly reduced ratios for the rate of oxygen consumption to the extracellular acidification rate, suggesting that glycolysis was enhanced compared to mitochondrial respiration. Similarly, the physical aspects, their appearance and stiffness, of their 3D spheroids and fibroblasts that were induced effects based on the cellular metabolic functions of MIA PaCa-2 were also different between CAFs and non-CAFs, and their levels for CAFS1 or SCC17F were similar to those for CAFS2 or MO-1000 cells, respectively. The findings reported herein indicate that cellular metabolic functions and the physical characteristics of these types of 3D spheroids may be valuable and useful indicators for estimating potential biological diversity among various CAFs.

Recent advances in in vitro skin-on-a-chip models for drug testing

INTRODUCTION

The skin is an organ that has the largest surface area and provides a barrier against external environment. While providing protection, it also interacts with other organs in the body and has implications in various diseases. Development of physiologically realistic in vitro models of the skin in the context of the whole body is important for studying these diseases, and will be a valuable tool for pharmaceutical, cosmetics, and food industry.

AREA COVERED

This article covers the basic background in skin structure, physiology, as well as drug metabolism in the skin, and dermatological diseases. We summarize various in vitro skin models currently available, and novel in vitro models based on organ-on-a-chip technology. We also explain the concept of multi-organ-on-a-chip and describe recent developments in this field aimed at recapitulating the interaction of the skin with other organs in the body.

EXPERT OPINION

Recent development in the organ-on-a-chip field has enabled the development of in vitro model systems that resemble human skin more closely than conventional models. In near future, we will be seeing various model systems that allow researchers to study complex diseases in a more mechanistic manner, which will help the development of new pharmaceuticals for such diseases.

Experimental Models for Rare Melanoma Research-The Niche That Needs to Be Addressed

Melanoma, the tumor arising from the malignant transformation of pigment-producing cells-the melanocytes-represents one of the most severe cancer types. Despite their rarity compared to cutaneous melanoma, the extracutaneous subtypes such as uveal melanoma (UM), acral lentiginous melanoma (ALM), and mucosal melanoma (MM) stand out due to their increased aggressiveness and mortality rate, demanding continuous research to elucidate their specific pathological features and develop efficient therapies. Driven by the emerging progresses made in the preclinical modeling of melanoma, the current paper covers the most relevant in vitro, in vivo, and in ovo systems, providing a deeper understanding of these rare melanoma subtypes. However, the preclinical models for UM, ALM, and MM that were developed so far remain scarce, and none of them is able to completely simulate the complexity that is characteristic to these melanomas; thus, a continuous expansion of the existing library of experimental models is pivotal for driving advancements in this research field. An overview of the applicability of precision medicine in the management of rare melanoma subtypes is also provided.

Three-Dimensional Spheroid Configurations and Cellular Metabolic Properties of Oral Squamous Carcinomas Are Possible Pharmacological and Pathological Indicators

The objective of the current study was to elucidate the clinicopathological significance and appearance of in vitro three-dimension (3D) spheroid models of oral malignant tumors that were prepared from four pathologically different squamous cell carcinoma (OSCC; low-grade; SSYP and MO-1000, intermediate-grade; LEM2) and oral adenosquamous carcinoma (OASC; high-grade; Mesimo) obtained from patients with different malignant stages. To characterize the biological significance of these cell lines themselves, two-dimensional (2D) cultured cells were subjected to cellular metabolic analysis by a Seahorse bioanalyzer alongside the measurement of the cytotoxicity of cisplatin (CDDP). The appearance of their 3D spheroids was then observed by phase contrast microscopy, and both 2D and 3D cultured cells were subject to trypsin digestion and qPCR analysis of factors related to oncogenic signaling and other related analyses. ATP-linked respiration and proton leaking were significantly different among the four cell lines, and the malignant stages of these cultures were significantly associated with increased ATP-linked respiration and decreased proton leakage. Alternatively, the appearances of these 3D spheroids were also significantly diverse among them, and their differences increased in the order of LEM2, MO-1000, SSYP, and Mesimo. Interestingly, these orders were exactly the same in that the efficacies of CDDP-induced cytotoxicity increased in the same order. qPCR analysis indicated that the levels of expression of oncogenic signaling-related factors varied among these four cell lines, and the values for fibronectin and a key regulator of mitochondrial biogenesis, PGC-1α, were prominently elevated in cultures of the worst malignant Mesimo cells. In addition, although 0.25% trypsin-induced destruction was comparable among all four 2D cultured cells, the values for the 3D spheroids were also substantially varied among these cultures. The findings reported herein indicate that cellular metabolic functions and 3D spheroid architectures may be valuable and useful indicators for estimating the pathological and drug-sensitive aspects of OSCC and OASC malignancies.

3D Spheroid Configurations Are Possible Indictors for Evaluating the Pathophysiology of Melanoma Cell Lines

To study the molecular mechanisms responsible for inducing the spatial proliferation of malignant melanomas (MM), three-dimension (3D) spheroids were produced from several MM cell lines including SK-mel-24, MM418, A375, WM266-4, and SM2-1, and their 3D architectures and cellular metabolisms were evaluated by phase-contrast microscopy and Seahorse bio-analyzer, respectively. Several transformed horizontal configurations were observed within most of these 3D spheroids, and the degree of their deformity was increased in the order: WM266-4, SM2-1, A375, MM418, and SK-mel-24. An increased maximal respiration and a decreased glycolytic capacity were observed within the lesser deformed two MM cell lines, WM266-4 and SM2-1, as compared with the most deformed ones. Among these MM cell lines, two distinct cell lines, WM266-4 and SK-mel-24, whose 3D appearances were the closest and farthest, respectively, from being horizontally circular-shaped, were subjected to RNA sequence analyses. Bioinformatic analyses of the differentially expressed genes (DEGs) identified KRAS and SOX2 as potential master regulatory genes for inducing these diverse 3D configurations between WM266-4 and SK-mel-24. The knockdown of both factors altered the morphological and functional characteristics of the SK-mel-24 cells, and in fact, their horizontal deformity was significantly reduced. A qPCR analysis indicated that the levels of several oncogenic signaling related factors, including KRAS and SOX2, PCG1α, extracellular matrixes (ECMs), and ZO1 had fluctuated among the five MM cell lines. In addition, and quite interestingly, the dabrafenib and trametinib resistant A375 (A375DT) cells formed globe shaped 3D spheroids and showed different profiles in cellular metabolism while the mRNA expression of these molecules that were tested as above were different compared with A375 cells. These current findings suggest that 3D spheroid configuration has the potential for serving as an indicator of the pathophysiological activities associated with MM.

3D tumor explant as a novel platform to investigate therapeutic pathways and predictive biomarkers in cancer patients

Immunotherapy with immune checkpoint inhibitors can induce durable clinical responses in different human malignancies but the number of responding patients remains globally modest. The limited therapeutic efficacy of ICI depends on multiple factors, among which the immune suppressive features of the tumor microenvironment play a key role. For this reason, experimental models that enable dissection of the immune-hostile tumor milieu components are required to unravel how to overcome resistance and obtain full-fledged anti-tumor immunity. Recent evidence supports the usefulness of 3D ex vivo systems in retaining features of tumor microenvironment to elucidate molecular and immunologic mechanisms of response and resistance to immune checkpoint blockade. In this perspective article we discuss the recent advances in patient-derived 3D tumor models and their potential in support of treatment decision making in clinical setting. We will also share our experience with dynamic bioreactor tumor explant culture of samples from melanoma and sarcoma patients as a reliable and promising platform to unravel immune responses to immune checkpoint inhibitors.

A preclinical model of cutaneous melanoma based on reconstructed human epidermis

Malignant melanoma is among the tumor entities with the highest increase of incidence worldwide. To elucidate melanoma progression and develop new effective therapies, rodent models are commonly used. While these do not adequately reflect human physiology, two-dimensional cell cultures lack crucial elements of the tumor microenvironment. To address this shortcoming, we have developed a melanoma skin equivalent based on an open-source epidermal model. Melanoma cell lines with different driver mutations were incorporated into these models forming distinguishable tumor aggregates within a stratified epidermis. Although barrier properties of the skin equivalents were not affected by incorporation of melanoma cells, their presence resulted in a higher metabolic activity indicated by an increased glucose consumption. Furthermore, we re-isolated single cells from the models to characterize the proliferation state within the respective model. The applicability of our model for tumor therapeutics was demonstrated by treatment with a commonly used v-raf murine sarcoma viral oncogene homolog B (BRAF) inhibitor vemurafenib. This selective BRAF inhibitor successfully reduced tumor growth in the models harboring BRAF-mutated melanoma cells. Hence, our model is a promising tool to investigate melanoma development and as a preclinical model for drug discovery.

Melanoma spheroid-containing artificial dermis as an alternative approach to in vivo models

Melanoma spheroid-loaded 3D skin models allow for the study of crucial tumor characteristics and factors at a superior level because the neoplastic cells are integrated into essential human skin components, permitting tumor-skin model communication. Herein, we designed a melanoma-containing artificial dermis by inserting multicellular tumor spheroids from the metastatic phase of WM 1617 melanoma cells into an artificial dermis. We cultured multicellular melanoma spheroids by hanging drop method (250 cells per drop) with a size of 420 μm in diameter after incubation for 14 days. These spheroids were integrated into the dermal equivalents that had been previously preparedwith a type-I collagen matrix and healthy fibroblasts. The melanoma spheroid cells invaded and proliferated in the artificial dermis. Spheroids treated with a 1.0 μmol/L aluminum chloride phthalocyanine nanoemulsion in the absence of light showed high cell viability. In contrast, under irradiation with visible red light (660 nm) at 25 J/cm2, melanoma cells were killed and the healthy tissue was preserved, indicating that photodynamic therapy is effective in such a model. Therefore, the 3D skin melanoma model has potential to promote research in full-thickness skin model targeting optimized preclinical assays.

3D Bioprinting: An Enabling Technology to Understand Melanoma

Melanoma is a potentially fatal cancer with rising incidence over the last 50 years, associated with enhanced sun exposure and ultraviolet radiation. Its incidence is highest in people of European descent and the ageing population. There are multiple clinical and epidemiological variables affecting melanoma incidence and mortality, such as sex, ethnicity, UV exposure, anatomic site, and age. Although survival has improved in recent years due to advances in targeted and immunotherapies, new understanding of melanoma biology and disease progression is vital to improving clinical outcomes. Efforts to develop three-dimensional human skin equivalent models using biofabrication techniques, such as bioprinting, promise to deliver a better understanding of the complexity of melanoma and associated risk factors. These 3D skin models can be used as a platform for patient specific models and testing therapeutics.

Melanoma growth in non-chemically modified translucid bacterial nanocellulose hollow and compartimentalized spheres

BACKGROUND

Bacterial nanocellulose (BNC) has been used as cell support in numerous tissue engineering studies. Its use can be explained based on the fact its structure allows the creation of a required microenvironment for an ideal material, which supports 3D cell culture. Its structure and interconnected pores lead to animal cells adhesion and proliferation, also allowing oxygen and nutrients transportation.

METHODS

We developed a new methodology to produce spherical platforms synthesized by Komagataebacter hansenii (ATCC 23769) under dynamic culture conditions in minimal medium. The chemical composition and physical properties of the platforms were evaluated. Then, human melanoma cells (SK-MEL-28) were encapsulated into the platforms and evaluated by metabolic activity, morphology and their ability on adhering to the Hollow Translucid BNC Spheres (BNC-TS-H) and Compartmentalized Translucid BNC Spheres (BNC-TS-C) up to 3 days.

RESULTS

BNC-TS-H and BNC-TS-C platforms were produced as translucid spheroid platforms with distinct microenvironment under dynamic fermentation. The chemical and physical characterizations confirmed the platforms composition as BNC. The produced internal microenvironments in spherical platforms are relevant to determine tumor cell fate. In the first 12 h of culture, cells were could adhere to nanocellulose microfibers assuming their typical tumorous phenotype in 72 h of culture.

CONCLUSION

The dynamic fermentation in minimal medium produced distinct microstructured platforms of BNC-TS-H and BNC-TS-C. The platforms microstructure resulted in microenvironments that enabled distinct cell-cell and cell-matrix interactions. This behavior suggests several applications on tissue engineering.

GENERAL SIGNIFICANCE

The method produced translucid BNC sphere platforms with distinct microenvironments for 3D cell culture.

Investigating Cutaneous Squamous Cell Carcinoma in vitro and in vivo: Novel 3D Tools and Animal Models

Cutaneous Squamous Cell Carcinoma (cSCC) represents the second most common type of skin cancer, which incidence is continuously increasing worldwide. Given its high frequency, cSCC represents a major public health problem. Therefore, to provide the best patients’ care, it is necessary having a detailed understanding of the molecular processes underlying cSCC development, progression, and invasion. Extensive efforts have been made in developing new models allowing to study the molecular pathogenesis of solid tumors, including cSCC tumors. Traditionally, in vitro studies were performed with cells grown in a two-dimensional context, which, however, does not represent the complexity of tumor in vivo. In the recent years, new in vitro models have been developed aiming to mimic the three-dimensionality (3D) of the tumor, allowing the evaluation of tumor cell-cell and tumor-microenvironment interaction in an in vivo-like setting. These models include spheroids, organotypic cultures, skin reconstructs and organoids. Although 3D models demonstrate high potential to enhance the overall knowledge in cancer research, they lack systemic components which may be solved only by using animal models. Zebrafish is emerging as an alternative xenotransplant model in cancer research, offering a high-throughput approach for drug screening and real-time in vivo imaging to study cell invasion. Moreover, several categories of mouse models were developed for pre-clinical purpose, including xeno- and syngeneic transplantation models, autochthonous models of chemically or UV-induced skin squamous carcinogenesis, and genetically engineered mouse models (GEMMs) of cSCC. These models have been instrumental in examining the molecular mechanisms of cSCC and drug response in an in vivo setting. The present review proposes an overview of in vitro, particularly 3D, and in vivo models and their application in cutaneous SCC research.

Microfluidic-Based Oxygen (O2) Sensors for On-Chip Monitoring of Cell, Tissue and Organ Metabolism

Oxygen (O₂) quantification is essential for assessing cell metabolism, and its consumption in cell culture is an important indicator of cell viability. Recent advances in microfluidics have made O₂ sensing a crucial feature for organ-on-chip (OOC) devices for various biomedical applications. OOC O₂ sensors can be categorized, based on their transducer type, into two main groups, optical and electrochemical. In this review, we provide an overview of on-chip O₂ sensors integrated with the OOC devices and evaluate their advantages and disadvantages. Recent innovations in optical O₂ sensors integrated with OOCs are discussed in four main categories: (i) basic luminescence-based sensors; (ii) microparticle-based sensors; (iii) nano-enabled sensors; and (iv) commercial probes and portable devices. Furthermore, we discuss recent advancements in electrochemical sensors in five main categories: (i) novel configurations in Clark-type sensors; (ii) novel materials (e.g., polymers, O₂ scavenging and passivation materials); (iii) nano-enabled electrochemical sensors; (iv) novel designs and fabrication techniques; and (v) commercial and portable electrochemical readouts. Together, this review provides a comprehensive overview of the current advances in the design, fabrication and application of optical and electrochemical O₂ sensors.

The Challenging Melanoma Landscape: From Early Drug Discovery to Clinical Approval

Melanoma is recognized as the most dangerous type of skin cancer, with high mortality and resistance to currently used treatments. To overcome the limitations of the available therapeutic options, the discovery and development of new, more effective, and safer therapies is required. In this review, the different research steps involved in the process of antimelanoma drug evaluation and selection are explored, including information regarding in silico, in vitro, and in vivo experiments, as well as clinical trial phases. Details are given about the most used cell lines and assays to perform both two- and three-dimensional in vitro screening of drug candidates towards melanoma. For in vivo studies, murine models are, undoubtedly, the most widely used for assessing the therapeutic potential of new compounds and to study the underlying mechanisms of action. Here, the main melanoma murine models are described as well as other animal species. A section is dedicated to ongoing clinical studies, demonstrating the wide interest and successful efforts devoted to melanoma therapy, in particular at advanced stages of the disease, and a final section includes some considerations regarding approval for marketing by regulatory agencies. Overall, considerable commitment is being directed to the continuous development of optimized experimental models, important for the understanding of melanoma biology and for the evaluation and validation of novel therapeutic strategies.

Activation of cGMP-Dependent Protein Kinase Restricts Melanoma Growth and Invasion by Interfering with the EGF/EGFR Pathway

Drug resistance mechanisms still characterize metastatic melanoma, despite the new treatments that have been recently developed. Targeting of the cGMP/protein kinase G pathway is emerging as a therapeutic approach in cancer research. In this study, we evaluated the anticancer effects of two polymeric-linked dimeric cGMP analogs able to bind and activate protein kinase G, called protein kinase G activators (PAs) 4 and 5. PA5 was identified as the most effective compound on melanoma cell lines as well as on patient-derived metastatic melanoma cells cultured as three-dimensional spheroids and in a zebrafish melanoma model. PA5 was able to significantly reduce cell viability, size, and invasion of melanoma spheroids. Importantly, PA5 showed a tumor-specific outcome because no toxic effect was observed in healthy melanocytes exposed to the cGMP analog. We defined that by triggering protein kinase G, PA5 interfered with the EGF pathway as shown by lower EGFR phosphorylation and reduction of activated, phosphorylated forms of protein kinase B and extracellular signal‒regulated kinase 1/2 in melanoma cells. Finally, PA5 significantly reduced the metastatic process in zebrafish. These studies open future perspectives for the cGMP analog PA5 as a potential therapeutic strategy for melanoma.

Characterization of Primary Cultures of Normal and Neoplastic Canine Melanocytes

Simple Summary

Melanoma is one of the most aggressive cancers in humans, with high rates of metastasis and a poor prognosis. Because of its environmental, biological and genetic features, numerous studies indicate the dog as a good comparative model for human melanoma. Primary cell cultures of healthy and neoplastic melanocytes derived from skin and oral mucosa of dogs with spontaneous tumors are established in this study. This model could represent a suitable tool to compare biological and molecular features of normal and neoplastic melanocytes from the same patient, to investigate the pathways underlying the oncogenic transformation, and to apply a more personalized therapeutic strategy. The cell cultures also meet international guidelines that encourage the use of alternative models to animal ones for the study of oncological diseases.

Abstract

Although numerous animal models, especially mouse models, have been established for the study of melanoma, they often fail to accurately describe the mechanisms of human disease because of their anatomic, physiological, and immune differences. The dog, as a spontaneous model of melanoma, is nowadays considered one of the most valid alternatives due to the heterogeneity of clinical presentations and of histological and genetic similarities of canine melanoma with the human counterpart. The aim of the study was to optimize a protocol for the isolation and cultivation of healthy and neoplastic canine melanocytes derived from the same animal and obtained from cutaneous and mucosal (oral) sites. We obtained five primary tumor cell cultures (from 2 cutaneous melanoma, 2 mucosal melanoma and 1 lymph node metastasis) and primary normal melanocyte cell cultures (from normal skin and mucosa) from the same dogs. Immunocytochemical characterization with Melan A, PNL2 and S100 antibodies confirmed the melanocytic origin of the cells. This work contributes to expanding the case record of studies on canine melanoma cell cultures as suitable model to study human and canine melanoma. To the authors’ knowledge, this is the first report of isolation of normal skin and mucosal canine melanocytes.

Preparation, Drug Treatment, and Immunohistological Analysis of Tri-Culture Spheroid 3D Melanoma-Like Models

Most currently available three-dimensional melanoma models have either focused on simplicity or were optimized for physiological relevance. Accordingly, these paradigms have been either composed of malignant cells only or they were sophisticated human skin equivalents featuring multiple cell types and skin-like organization. Here, an intermediate spheroid-based assay system is presented, which uses tri-cultures of human CCD-1137Sk fibroblasts, HaCaT keratinocytes, and SK-MEL-28 melanoma cells. Being made of cell lines, these spheroids can be reliably reproduced without any special equipment using standard culture procedures, and they feature different aspects of skin and early stage melanoma. Therefore, this kind of model can be useful for lead-compound testing or addressing fundamental principles of early melanoma formation.

Single-Cell RNA Sequencing Unravels Heterogeneity of the Stromal Niche in Cutaneous Melanoma Heterogeneous Spheroids

Heterogeneous spheroids have recently acquired a prominent position in melanoma research because they incorporate microenvironmental cues relevant for melanoma. In this study, we focused on the analysis of microenvironmental factors introduced in melanoma heterogeneous spheroids by different dermal fibroblasts. We aimed to map the fibroblast diversity resulting from previously acquired damage caused by exposure to extrinsic and intrinsic stimuli. To construct heterogeneous melanoma spheroids, we used normal dermal fibroblasts from the sun-protected skin of a juvenile donor. We compared them to the fibroblasts from the sun-exposed photodamaged skin of an adult donor. Further, we analysed the spheroids by single-cell RNA sequencing. To validate transcriptional data, we also compared the immunohistochemical analysis of heterogeneous spheroids to melanoma biopsies. We have distinguished three functional clusters in primary human fibroblasts from melanoma spheroids. These clusters differed in the expression of (a) extracellular matrix-related genes, (b) pro-inflammatory factors, and (c) TGFβ signalling superfamily. We observed a broader deregulation of gene transcription in previously photodamaged cells. We have confirmed that pro-inflammatory cytokine IL-6 significantly enhances melanoma invasion to the extracellular matrix in our model. This supports the opinion that the aspects of ageing are essential for reliable melanoma 3D modelling in vitro.

Human skin models: From healthy to disease-mimetic systems; characteristics and applications

Skin drug delivery is an emerging route in drug development, leading to an urgent need to understand the behaviour of active pharmaceutical ingredients within the skin. Given, As one of the body's first natural defences, the barrier properties of skin provide an obstacle to the successful outcome of any skin drug therapy. To elucidate the mechanisms underlying this barrier, reductionist strategies have designed several models with different levels of complexity, using non-biological and biological components. Besides the detail of information and resemblance to human skin in vivo, offered by each in vitro model, the technical and economic efforts involved must also be considered when selecting the most suitable model. This review provides an outline of the commonly used skin models, including healthy and diseased conditions, in-house developed and commercialized models, their advantages and limitations, and an overview of the new trends in skin-engineered models.

Evaluation of Melanoma (SK-MEL-2) Cell Growth between Three-Dimensional (3D) and Two-Dimensional (2D) Cell Cultures with Fourier Transform Infrared (FTIR) Microspectroscopy

Fourier transform infrared (FTIR) microspectroscopy was used to evaluate the growth of human melanoma cells (SK-MEL-2) in two-dimensional (2D) versus three-dimensional (3D) spheroid culture systems. FTIR microspectroscopy, coupled with multivariate analysis, could be used to monitor the variability of spheroid morphologies prepared from different cell densities. The characteristic shift in absorbance bands of the 2D cells were different from the spectra of cells from 3D spheroids. FTIR microspectroscopy can also be used to monitor cell death similar to fluorescence cell staining in 3D spheroids. A change in the secondary structure of protein was observed in cells from the 3D spheroid versus the 2D culture system. FTIR microspectroscopy can detect specific alterations in the biological components inside the spheroid, which cannot be detected using fluorescence cell death staining. In the cells from 3D spheroids, the respective lipid, DNA, and RNA region content represent specific markers directly proportional to the spheroid size and central area of necrotic cell death, which can be confirmed using unsupervised PCA and hierarchical cluster analysis. FTIR microspectroscopy could be used as an alternative tool for spheroid cell culture discrimination, and validation of the usual biochemical technique.

Human Organ-Specific 3D Cancer Models Produced by the Stromal Self-Assembly Method of Tissue Engineering for the Study of Solid Tumors

Cancer research has considerably progressed with the improvement of in vitro study models, helping to understand the key role of the tumor microenvironment in cancer development and progression. Over the last few years, complex 3D human cell culture systems have gained much popularity over in vivo models, as they accurately mimic the tumor microenvironment and allow high-throughput drug screening. Of particular interest, in vitrohuman 3D tissue constructs, produced by the self-assembly method of tissue engineering, have been successfully used to model the tumor microenvironment and now represent a very promising approach to further develop diverse cancer models. In this review, we describe the importance of the tumor microenvironment and present the existing in vitro cancer models generated through the self-assembly method of tissue engineering. Lastly, we highlight the relevance of this approach to mimic various and complex tumors, including basal cell carcinoma, cutaneous neurofibroma, skin melanoma, bladder cancer, and uveal melanoma.

[Use of 2D and 3D cell cultures in dermatology]

The skin is a complex organ that performs a number of vital functions, including forming a physical barrier that protects our body from the penetration of pathogens and irritants and from excessive transepidermal water loss. In addition to its passive properties, the skin is also actively involved in the immune process. A complex structure of different cell types and structures allows the skin to fulfil these functions. In vitro research often faces the problem that simple 2D cell cultures are not able to adequately map these functions. Here 3D skin models offer a possible solution. In recent years, there has been significant development in this field; the reproducibility of the method as well as the physiological structure and tissue architecture of the 3D skin models have been improved. Depending on the research question, protocols for 3D skin models have been published, ranging from simple multilayer epidermis models to highly complex vascularized 3D full skin models.

A Three-dimensional Ex Vivo Viability Assay Reveals a Strong Correlation Between Response to Targeted Inhibitors and Mutation Status in Melanoma Lymph Node Metastases

Although clinical management of melanoma has changed considerably in recent years, intrinsic treatment resistance remains a severe problem and strategies to design personal treatment regimens are highly warranted. We have applied a three-dimensional (3D) ex vivo drug efficacy assay, exposing disaggregated cells from 38 freshly harvested melanoma lymph node metastases and 21 patient derived xenografts (PDXs) to clinical relevant drugs for 7 days, and examined its potential to evaluate therapy response. A strong association between Vemurafenib response and BRAF mutation status was achieved (P < .0001), while enhanced viability was seen in some NRAS mutated tumors. BRAF and NRAS mutated tumors responded comparably to the MEK inhibitor Cobimetinib. Based on the ex vivo results, two tumors diagnosed as BRAF wild-type by routine pathology examinations had to be re-evaluated; one was subsequently found to have a complex V600E mutation, the other a double BRAF mutation (V600E/K601 N). No BRAF inhibitor resistance mechanisms were identified, but PIK3CA and NF1 mutations were identified in two highly responsive tumors. Concordance between ex vivo drug responses using tissue from PDXs and corresponding patient tumors demonstrate that PDX models represent an indefinite source of tumor material that may allow ex vivo evaluation of numerous drugs and combinations, as well as studies of underlying molecular mechanisms. In conclusion, we have established a rapid and low cost ex vivo drug efficacy assay applicable on tumor tissue from patient biopsies. The 3D/spheroid format, limiting the influence from normal adjacent cells and allowing assessment of drug sensitivity to numerous drugs in one week, confirms its potential as a supplement to guide clinical decision, in particular in identifying non-responding patients.

A novel spheroid-based co-culture model mimics loss of keratinocyte differentiation, melanoma cell invasion, and drug-induced selection of ABCB5-expressing cells

Background

Different 3D-cell culture approaches with varying degrees of complexity have been developed to serve as melanoma models for drug testing or mechanistic studies. While these 3D-culture initiatives are already often superior to classical 2D approaches, they are either composed of only melanoma cells or they are so complex that the behavior of individual cell types is hard to understand, and often they are difficult to establish and expensive.

Methods

This study used low-attachment based generation of spheroids composed of up to three cell types. Characterization of cells and spheroids involved cryosectioning, immunofluorescence, FACS, and quantitative analyses. Statistical evaluation used one-way ANOVA with post-hoc Tukey test or Student’s t-test.

Results

The tri-culture model allowed to track cellular behavior in a cell-type specific manner and recapitulated different characteristics of early melanoma stages. Cells arranged into a collagen-IV rich fibroblast core, a ring of keratinocytes, and groups of highly proliferating melanoma cells on the outside. Regularly, some melanoma cells were also found to invade the fibroblast core. In the absence of melanoma cells, the keratinocyte ring stratified into central basal-like and peripheral, more differentiated cells. Conversely, keratinocyte differentiation was clearly reduced upon addition of melanoma cells. Treatment with the cytostatic drug, docetaxel, restored keratinocyte differentiation and induced apoptosis of external melanoma cells. Remaining intact external melanoma cells showed a significantly increased amount of ABCB5-immunoreactivity.

Conclusions

In the present work, a novel, simple spheroid-based melanoma tri-culture model composed of fibroblasts, keratinocytes, and melanoma cells was described. This model mimicked features observed in early melanoma stages, including loss of keratinocyte differentiation, melanoma cell invasion, and drug-induced increase of ABCB5 expression in external melanoma cells.

Electronic supplementary material

The online version of this article (10.1186/s12885-019-5606-4) contains supplementary material, which is available to authorized users.

Advances in the Biofabrication of 3D Skin in vitro: Healthy and Pathological Models

The relevance for in vitro three-dimensional (3D) tissue culture of skin has been present for almost a century. From using skin biopsies in organ culture, to vascularized organotypic full-thickness reconstructed human skin equivalents, in vitro tissue regeneration of 3D skin has reached a golden era. However, the reconstruction of 3D skin still has room to grow and develop. The need for reproducible methodology, physiological structures and tissue architecture, and perfusable vasculature are only recently becoming a reality, though the addition of more complex structures such as glands and tactile corpuscles require advanced technologies. In this review, we will discuss the current methodology for biofabrication of 3D skin models and highlight the advantages and disadvantages of the existing systems as well as emphasize how new techniques can aid in the production of a truly physiologically relevant skin construct for preclinical innovation.