Enzymatic synthesis of medium- and long-chain triacylglycerols-enriched structured lipid fromCinnamomum camphoraseed oil and camellia oil by Lipozyme RM IM

Medium- and Long-Chain Triacylglycerol: Preparation, Health Benefits, and Food Utilization

Medium- and long-chain triacylglycerol (MLCT) is a structured lipid with both medium- and long-chain fatty acids in one triacylglycerol molecule. Compared with long-chain triacylglycerol (LCT), which is mainly present in common edible oils, and the physical blend of medium-chain triacylglycerol with LCT (MCT/LCT), MLCT has different physicochemical properties, metabolic characteristics, and nutritional values. In this article, the recent advances in the use of MLCT in food formulations are reviewed. The natural sources and preparation of MLCT are discussed. A comprehensive summary of MLCT digestion, absorption, transport, and oxidation is provided as well as its health benefits, including reducing the risk of overweight, hypolipidemic and hypoglycemic effects, etc. The potential MLCT uses in food formulations, such as infant formulas, healthy foods for weight loss, and sports foods, are summarized. Finally, the current safety assessment and regulatory status of MLCT in food formulations are reviewed.

Production of Margarine Fat Containing Medium- and Long-Chain Triacylglycerols by Enzymatic Interesterification of Peony Seed Oil, Palm Stearin and Coconut Oil Blends

This paper reports the preparation of margarine fat using Lipozyme TL IM as a catalyst and peony seed oil (PSO), palm stearin (PS) and coconut oil (CO) as raw materials. The results indicate that there were no significant changes in fatty acid composition before or after interesterification of the oil samples. However, the total amount of medium- and long-chain triglycerides (MLCTs) increased from 2.92% to 11.38% in sample E1 after interesterification, mainly including LaLaO, LaMO, LaPM, LaOO, LaPO and LaPP. Moreover, the slip melting point (SMP) of sample E1 decreased from 45.9 °C (B1) to 33.5 °C. The solid fat content (SFC) of all the samples at 20 °C was greater than 10%, indicating that they could effectively prevent oil exudation. After interesterification, the samples exhibited a β' crystal form and could be used to prepare functional margarine.

Effect of substrate composition on physicochemical properties of the medium-long-medium structured triacylglycerol

BACKGROUND

Nutritional and functional qualities and applications of structured lipids (SL) depend on the composition and molecular structure of fatty acids in the glycerol backbone of triacylglycerol (TAG). However, the relationship between the substrate composition and physicochemical qualities of SL has not been revealed. The investigation aims to disclose the effect of substrate composition on the physicochemical properties of medium-long-medium structured lipids (MLM-SLs) by enzymatic interesterification of Lipozyme TLIM/RMIM.

RESULTS

The medium-long-chain triacylglycerol (MLCT) yield could reach 70.32%, including 28.98% CaLCa (1,3-dioctonyl-2-linoleoyl glyceride) and 24.34% CaOCa (1,3-didecanoyl-2-oleoyl glyceride). The sn-2 unsaturated fatty acid composition mainly depended on long-chain triacylglycerol (LCT) in the substrate. The increased carbon chain length and double bond in triacylglycerol decreased its melting and crystallization temperature. The balanced substrate composition of MCT/LCT increased the size and finer crystals. Molecular docking simulation revealed that the MLCT molecule mainly interacted with the catalytic triplets of Lipozyme TLIM (Arg81-Ser83-Arg84) and the Lipozyme RMIM (Tyr183-Thr226-Arg262) by OH bond. The oxygen atom of the ester on the MLCT molecule was primarily bound to the hydrogen of hydroxyl and amino groups on the binding sites of Lipozyme TLIM/RMIM. The intermolecular interplay between MLCT and Lipozyme RMIM is more stable than Lipozyme TLIM due to the formation of lower binding affinity energy.

CONCLUSION

This research clarifies the interaction mechanism between MLCT molecules and lipases, and provides an in-depth understanding of the relationship between substrate composition, molecular structure and physicochemical property of MLM-SLs. © 2023 Society of Chemical Industry.

Isolation of Fatty Acids from the Enzymatic Hydrolysis of Capsaicinoids and Their Use in Enzymatic Acidolysis of Coconut Oil

Herein we report the optimization of enzymatic hydrolysis of a mixture of capsaicinoids, capsaicin and dihydrocapsaicin obtained from chili peppers, and the utilization of the isolated fatty acids for the modification of coconut oil using enzyme catalyzed acidolysis. This work was carried out as the fatty acids that can be isolated from capsaicinoid hydrolysis have been shown to possess interesting biological properties. These biological properties could be better exploited by incorporating the fatty acids into a suitable delivery vehicle. The enzymatic hydrolysis of the mixture of capsaicin and dihydrocapsaicin was carried out using Novozym® 435 in phosphate buffer (pH 7.0) at 50℃. The enzyme catalyst could be reused in multiple cycles of the hydrolysis reaction. The desired 8-methyl-6-trans-nonenoic acid and 8-methylnonanoic acid were isolated from the hydrolysis reaction mixture using a simple extraction procedure with a 47.8% yield. This was carried out by first extracting the reaction mixture at pH 10 with ethyl acetate to remove any dissolved capsaicinoids and vanillyl amine side product. The fatty acids were isolated after adjustment of the pH of the reaction mixture to 5 and second extraction with ethyl acetate. The acidolysis of coconut oil with the obtained fatty acids was performed using Lipozyme® TL IM. The performance of the acidolysis reaction was evaluated using 1H-NMR spectroscopy and verified in selected cases using gas chromatography. The best performing conditions involved carrying out the acidolysis reaction at 60℃ with a 1.2 w/w ratio of the fatty acids to coconut oil and 10% enzyme loading for 72 h. This resulted in the incorporation of 26.61% and 9.86% of 8-methyl-6-trans-nonenoic acid and 8-methylnonanoic acid, respectively, into the modified coconut oil product. This product can act as a potential delivery vehicle for these interesting compounds.

Novel trends and challenges in fat modification of next-generation infant formula: Considering the structure of milk fat globules to improve lipid digestion and metabolism of infants

Differences in the composition and structure of lipid droplets in infant formula (IF) and human milk (HM) can affect the fat digestion of infants, leading to high risk of metabolic diseases during later stages of growth. Recently, interest in simulating HM fat (HMF) has gradually increased due to its beneficial functions for infants. Much research focuses on the simulation of fatty acids and triacylglycerols. Enzymatic combined with new technologies such as carbodiimide coupling immobilization enzymes, solvent-free synthesis, and microbial fermentation can improve the yield of simulated HMF. Furthermore, fat modification in next-generation IF requires attention to the impact on the structure and function of milk fat globules (MFG). This review also summarizes the latest reports on MFG structure simulation, mainly related to the addition method and sequence of membrane components, and other milk processing steps. Although some of the simulated HMF technologies and products have been applied to currently commercially available IF, the cost is still high. Furthermore, understanding the fat decomposition of simulated HMF during digestion and assessing its nutritional effects on infants later in life is also a huge challenge. New process development and more clinical studies are needed to construct and evaluate simulated HMF in the future.

Synthesis of eicosapentaenoic acid-enriched medium- and long-chain triglyceride by lipase-catalyzed transesterification: a novel strategy for clinical nutrition intervention

BACKGROUND

Eicosapentaenoic acid (EPA) has been recognized as a promising nutrient to improve therapeutic efficacy for cancer patients. Nevertheless, there are certain limitations to the application of EPA due to its structural characteristics. To maximize the nutritive value of EPA, a type of medium- and long-chain triacylglycerol (MLCT) enriched with EPA was designed and synthesized using the lipase-catalyzed transesterification of medium-chain triglyceride (MCT) and EPA-enriched fish oil (FO).

RESULTS

The optimum synthesis conditions for EPA-enriched MLCT used Lipozyme RM as catalyst, and had a substrate mass ratio (MCT/EPA-enriched FO) of 3:1, lipase loading of 80 g kg^-1 , a reaction temperature of 60 °C, and a reaction time of 6 h. The MLCT content was as high as 80.79% after the transesterification reaction and the purification, and the content of MLCT containing EPA accounted for 70.21%. The distribution of EPA at the sn-2 position showed a significant increase in MLCT compared with the original substrate, from 18.89% to 26.93%. The in vitro digestion results demonstrated that MLCT had a significantly higher EPA bioaccessibility than the original substrate.

CONCLUSION

Eicosapentaenoic acid-enriched MLCT was developed. This may provide a novel strategy for clinical nutritional intervention. © 2023 Society of Chemical Industry.

Geographic Pattern of Variations in Chemical Composition and Nutritional Value of Cinnamomum camphora Seed Kernels from China

Cinnamomum camphora (camphor tree) is an important non-conventional edible plant species found in East Asia. Here, a detailed characterization for the chemical composition and nutritional value of C. camphora seed kernels (CCSKs) collected from different regions in China is provided. The results showed that there were significant differences among the CCSK samples in weights (1000 fruits, 1000 seeds and 1000 kernels), proximate composition, minerals, phenolics, flavonoids and amino acid contents. The highest contents of oil (62.08%) and protein (22.17%) were found in the CCSK samples collected from Chongqing and Shanghai, respectively. The highest content of mineral in the CCSK samples was K (4345.05-7186.89 mg/kg), followed by P (2735.86-5385.36 mg/kg), Ca (1412.27-3327.37 mg/kg) and Mg (2028.65-3147.32 mg/kg). The CCSK sample collected from Guizhou had the highest levels of total phenolic and flavonoid contents (TPC and TFC), while that from Chongqing had the lowest levels. In addition, the most abundant fatty acid in the CCSK samples was capric acid (57.37-60.18%), followed by lauric acid (35.23-38.29%). Similarities in the fatty acid composition among the CCSK samples were found. The CCSK sample collected from Guizhou had the highest percentage (36.20%) of essential amino acids to total amino acids, and Chongqing had the lowest value (28.84%). These results indicated that CCSK may be developed as an excellent source of plant-based medium-chain oil, protein, dietary fiber, minerals, phytochemicals and essential amino acids.

Future of Structured Lipids: Enzymatic Synthesis and Their New Applications in Food Systems

Structured lipids (SLs) refer to a new type of functional lipid obtained by modifying natural triacylglycerol (TAG) through the restructuring of fatty acids, thereby altering the composition, structure, and distribution of fatty acids attached to the glycerol backbones. Due to the unique functional characteristics of SLs (easy to absorb, low in calories, reduced serum TAG, etc.), there is increasing interest in the research and application of SLs. SLs were initially prepared using chemical methods. With the wide application of enzymes in industries and the advantages of enzymatic synthesis (mild reaction conditions, high catalytic efficiency, environmental friendliness, etc.), synthesis of SLs using lipase has aroused great interest. This review summarizes the reaction system of SL production and introduces the enzymatic synthesis and application of some of the latest SLs discussed/developed in recent years, including medium- to long-chain triacylglycerol (MLCT), diacylglycerol (DAG), EPA- and DHA-enriched TAG, human milk fat substitutes, and esterified propoxylated glycerol (EPG). Lastly, several new ways of applying SLs (powdered oil, DAG plastic fat, inert gas spray oil, and emulsion) in the future food industry are also highlighted.

Green synthesis of polydopamine functionalized magnetic mesoporous biochar for lipase immobilization and its application in interesterification for novel structured lipids production

In this study, the polydopamine functionalized magnetic mesoporous biochar (MPCB-DA) was prepared for immobilization of Bacillus licheniformis lipase via covalent immobilization. Under optimized immobilization conditions, the maximum immobilization yield, efficiency and immobilized lipase amount were found to be 45%, 54% and 36.9 mg/g, respectively. The immobilized lipase, MPCB-DA-Lipase showed good thermal stability and alkali resistance. The MPCB-DA-Lipase retained 56% initial activity after 10 reuse cycles, with more than 85% relative activity after 70 days' storage at 4 or 25 °C. The MPCB-DA-Lipase was efficiently applied in the interesterification of Cinnamomum camphora seed kernel oil and perilla seed oil, with maximum interesterification efficiency of 46%. The produced structured lipids belong to the S₂U and U₂S triacylglycerols, a novel medium-and long-chain triacylglycerol. These results demonstrated that the MPCB-DA-Lipase may be used as an efficient biocatalyst in lipid processing applications of food industries.

Distigmasterol-Modified Acylglycerols as New Structured Lipids-Synthesis, Identification and Cytotoxicity

Plant sterols, also referred as phytosterols, have been known as bioactive compounds which have cholesterol-lowering properties in human blood. It has been established that a diet rich in plant sterols or their esters alleviates cardiovascular diseases (CVD), and also may inhibit breast, colon and lung carcinogenesis. Phytosterols, in their free and esterified forms, are prone to thermo-oxidative degradation, where time and temperature affect the level of degradation. Looking for new derivatives of phytosterols with high thermo-oxidative stability for application in foods, our idea was to obtain novel structured acylglycerols in which two fatty acid parts are replaced by stigmasterol residues. In this work, asymmetric (1,2- and 2,3-) distigmasterol-modified acylglycerols (dStigMAs) were synthesized by the covalent attachment of stigmasterol residues to sn-1 and sn-2 or sn-2 and sn-3 positions of 3-palmitoyl-sn-glycerol or 1-oleoyl-sn-glycerol, respectively, using a succinate or carbonate linker. The chemical structures of the synthesized compounds were identified by NMR, HR-MS, and IR data. Moreover, the cytotoxicity of the obtained compounds was determined. The dStigMAs possessing a carbonate linker showed potent cytotoxicity to cells isolated from the small intestine and colon epithelium and liver, whereas the opposite results were obtained for compounds containing a succinate linker.

A novel sn-1,3 specific lipase from Janibacter sp. as catalysts for the high-yield synthesis of long-medium-long type structured triacylglycerols

Our study offers a novel sn-1,3 specific lipase MAJ1 from marine member Janibacter sp. strain HTCC2649 for preparing long-medium-long (LML) type structured triacylglycerols (TAGs). Firstly, the resin ECR1030 was selected as a suitable support for the immobilization of lipase MAJ1. An efficient synthesis of LML-type structured TAGs by the immobilized lipase MAJ1-catalyzed interesterification of methyl palmitate and tricaprylin was studied in a solvent-free system. The reaction conditions, including substrate molar ratio, temperature and enzyme loading, were optimized. Under the optimum conditions (immobilized lipase MAJ1 of 45 U/g, substrate molar ratio of 4:1, temperature of 35 °C, reaction time of 24 h), the structured TAGs with double long chains (DLCST) were obtained in a yield of 44.3 mol%. Secondly, multi-dimensional mass spectrometry-based shotgun lipidomics (MDMS-SL) was employed to quantify each TAG positional isomer in DLCST. The content of 1,3-dipalmitoyl-2-capryloyl-sn-glycerol in DLCST was 97.6% determined by the MDMS-SL technology.

Evaluation of enzymatic interesterification in structured triacylglycerols preparation: a concise review and prospect

Enzymatic interesterification (EIE) is one of the emerging technologies in the specialty fats industry. EIE has several advantages over the conventional chemical interesterification method, such that the process has higher flexibility and efficiency, is environmentally friendly and the immobilized enzyme can be recycled besides of the lower requirement for substrate's acid value. The physical properties and nutritional qualities of the fats and oils are modified after EIE, depending on the change in the position of fatty acids on the triacylglycerol (TAG) molecules. Evaluation of the interesterification reaction are important and useful in terms of its technological applications. This paper summarizes the conventional methods and the advancement for evaluating EIE processes, e.g., determination of the change in slip melting points, solid fat contents, TAG with equivalent carbon numbers, and sn-2 fatty acid compositions of the end product. Nonetheless, these methods are not comprehensive because during the EIE process, acyl migration occurs. A novel and convenient evaluation model which is based on the fatty acid distribution on the glycerol-backbone is proposed as a perspective. This model can be employed to monitor the interesterification degree and acyl migration during a regiospecific EIE process, which serves as a reaction rule that can be employed to control and optimize the EIE process, thereby producing structured TAG with desired properties.

Investigation of Lipid Metabolism by a New Structured Lipid with Medium- and Long-Chain Triacylglycerols from Cinnamomum camphora Seed Oil in Healthy C57BL/6J Mice

In the present study, a new structured lipid with medium- and long-chain triacylglycerols (MLCTs) was synthesized from camellia oil (CO) and Cinnamomum camphora seed oil (CCSO) by enzymatic interesterification. Meanwhile, the antiobesity effects of structured lipid were investigated through observing the changes of enzymes related to lipid mobilization in healthy C57BL/6J mice. Results showed that after synthesis, the major triacylgeride (TAG) species of intesterificated product changed to LaCC/CLaC (12.6 ± 0.46%), LaCO/LCL (21.7 ± 0.76%), CCO/LaCL (14.2 ± 0.55%), COO/OCO (10.8 ± 0.43%), and OOO (18.6 ± 0.64%). Through second-stage molecular distillation, the purity of interesterified product (MLCT) achieved 95.6%. Later, male C57BL/6J mice were applied to study whether the new structured lipid with MLCT has the efficacy of preventing the formation of obesity or not. After feeding with different diets for 6 weeks, MLCTs could reduce body weight and fat deposition in adipose tissue, lower plasma triacylglycerols (TG) (0.89 ± 0.16 mmol/L), plasma total cholesterol (TC) (4.03 ± 0.08 mmol/L), and hepatic lipids (382 ± 34.2 mg/mice) by 28.8%, 16.0%, and 30.5%, respectively, when compared to the control 2 group. This was also accompanied by increasing fecal lipids (113%) and the level of enzymes including cyclic adenosine monophosphate (cAMP), protein kinase A (PKA), hormone-sensitive lipase (HSL), and adipose triglyceride lipase (ATGL) related to lipid mobilization in MLCT group. From the results, it can be concluded that MLCT reduced body fat deposition probably by modulating enzymes related to lipid mobilization in C57BL/6J mice.

Cinnamomum camphora Seed Kernel Oil Ameliorates Oxidative Stress and Inflammation in Diet-Induced Obese Rats

Cinnamomum camphora seed kernel oil (CCSKO) was found to reduce body fat deposition and improve blood lipid in both healthy and obese rats. The study was aimed to investigate the antioxidative stress and anti-inflammatory effects of CCSKO in high-fat-diet-induced obese rats. The obese rats were treated with CCSKO, lard, and soybean oil, respectively, for 12 wk. The level of total antioxidant capacity (T-AOC), activities of superoxide dismutase (SOD), glutathione peroxidase, and catalase, and levels of malondialdehyde (MDA), tumor necrosis factor (TNF)-α, peroxisome proliferator-activated receptor (PPAR)-γ, interleukin (IL)-6, and P65 were compared among CCSKO, lard, and soybean oil groups. Our results showed that the level of T-AOC and activities of SOD and catalase were significantly increased and the level of MDA was significantly decreased in CCSKO group. In addition, CCSKO treatment reduced the activities of serum glutamic oxaloacetic transaminase and glutamate-pyruvate transaminase, and levels of serum TNF-α, IL-6, and P65 through raising the level of PPAR-γ. In conclusion, CCSKO has, for the first time, been found to ameliorate oxidative stress and inflammation in high-fat-diet-induced obese rats.

From microalgae oil to produce novel structured triacylglycerols enriched with unsaturated fatty acids

Novel structured triacylglycerols (STAGs) enriched with unsaturated fatty acids (UFAs) and low palmitic acid (PA) content were firstly synthesized from Schizochytrium sp. oil and oleic acid (OA) via solvent-free acidolysis catalyzed by Lipozyme RM IM. The results indicated that, the PA content decreased from 24.49% to 6.95%, while the UFAs content increased from 70.20% to 90.9% at the sn-1,3 positions in the STAGs under the optimal condition (i.e., lipase load of 7%, molar ratio of microalgae oil TAGs to OA of 1:3, and temperature of 65 °C). The lipase Lipozyme RM IM could be reused 16 times without significant loss of activity. The improved plastic and storage ranges of STAGs are useful for infant formula formulations, by which a possible method is blending of this product and 1,3-dioleoyl-2-palmitoylglycerol enriched fats and minor lipids based on the corresponding chemical compositions of human milk fat.

Lipozyme RM IM-catalyzed acidolysis of Cinnamomum camphora seed oil with oleic acid to produce human milk fat substitutes enriched in medium-chain fatty acids

In the present study, a human milk fat substitute (HMFS) enriched in medium-chain fatty acids (MCFAs) was synthesized through acidolysis reaction from Cinnamomum camphora seed oil (CCSO) with oleic acid in a solvent-free system. A commercial immobilized lipase, Lipozyme RM IM, from Rhizomucor miehei, was facilitated as a biocatalyst. Effects of different reaction conditions, including substrate molar ratio, enzyme concentration, reaction temperature, and reaction time were investigated using response surface methodology (RSM) to obtain the optimal oleic acid incorporation. After optimization, results showed that the maximal incorporation of oleic acid into HMFS was 59.68%. Compared with CCSO, medium-chain fatty acids at the sn-2 position of HMFS accounted for >70%, whereas oleic acid was occupied predominantly at the sn-1,3 position (78.69%). Meanwhile, triacylglycerol (TAG) components of OCO (23.93%), CCO (14.94%), LaCO (13.58%), OLaO (12.66%), and OOO (11.13%) were determined as the major TAG species in HMFS. The final optimal reaction conditions were carried out as follows: substrate molar ratio (oleic acid/CCSO), 5:1; enzyme concentration, 12.5% (w/w total reactants); reaction temperature, 60 °C; and reaction time, 28 h. The reusability of Lipozyme RM IM in the acidolysis reaction was also evaluated, and it was found that it could be reused up to 9 times without significant loss of activities. Urea inclusion method was used to separate and purify the synthetic product. As the ratio of HMFS/urea increased to 1:2, the acid value lowered to the minimum. In a scale-up experiment, the contents of TAG and total tocopherols in HMFS (modified CCSO) were 77.28% and 12.27 mg/100 g, respectively. All of the physicochemical indices of purified product were within food standards. Therefore, such a MCFA-enriched HMFS produced by using the acidolysis method might have potential application in the infant formula industry.