SPIDER DRAGLINE SILK: CORRELATED AND MOSAIC EVOLUTION IN HIGH-PERFORMANCE BIOLOGICAL MATERIALS

Modulating Polyalanine Motifs of Synthetic Spidroin for Controllable Preassembly and Strong Fiber Formation

Spider dragline (major ampullate) silk is one of the toughest known fibers in nature and exhibits an excellent combination of high tensile strength and elasticity. Increasing evidence has indicated that preassembly plays a crucial role in facilitating the proper assembly of silk fibers by bridging the mesoscale gap between spidroin molecules and the final strong fibers. However, it remains challenging to control the preassembly of spidroins and investigate its influence on fiber structural and mechanical properties. In this study, we explored to bridge this gap by modulating the polyalanine (polyA) motifs in repetitive region of spidroins to tune their preassemblies in aqueous dope solutions. Three biomimetic silk proteins with varying numbers of alanine residues in polyA motif and comparable molecular weights were designed and biosynthesized, termed as N16C-5A, N15C-8A, and N13C-12A, respectively. It was found that all three proteins could form nanofibril assemblies in the concentrated aqueous dopes, but the size and structural stability of the fibrils were distinct from each other. The silk protein N15C-8A with 8 alanine residues in polyA motif allowed for the formation of stable nanofibril assemblies with a length of approximately 200 nm, which were not prone to disassemble or aggregate as that of N16C-5A and N13C-12A. More interestingly, the stable fibril assembly of N15C-8A enabled spinning of simultaneously strong (623.3 MPa) and tough (107.1 MJ m-3) synthetic fibers with fine molecular orientation and close interface packing of fibril bundles. This work highlights that modulation of polyA motifs is a feasible way to tune the morphology and stability of the spidroin preassemblies in dope solutions, thus controlling the structural and mechanical properties of the resulting fibers.

Insight into the adaptive role of arachnid genome-wide duplication through chromosome-level genome assembly of the Western black widow spider

Although spiders are one of the most diverse groups of arthropods, the genetic architecture of their evolutionary adaptations is largely unknown. Specifically, ancient genome-wide duplication occurring during arachnid evolution ~450 mya resulted in a vast assembly of gene families, yet the extent to which selection has shaped this variation is understudied. To aid in comparative genome sequence analyses, we provide a chromosome-level genome of the Western black widow spider (Latrodectus hesperus)-a focus due to its silk properties, venom applications, and as a model for urban adaptation. We used long-read and Hi-C sequencing data, combined with transcriptomes, to assemble 14 chromosomes in a 1.46 Gb genome, with 38,393 genes annotated, and a BUSCO score of 95.3%. Our analyses identified high repetitive gene content and heterozygosity, consistent with other spider genomes, which has led to challenges in genome characterization. Our comparative evolutionary analyses of eight genomes available for species within the Araneoidea group (orb weavers and their descendants) identified 1,827 single-copy orthologs. Of these, 155 exhibit significant positive selection primarily associated with developmental genes, and with traits linked to sensory perception. These results support the hypothesis that several traits unique to spiders emerged from the adaptive evolution of ohnologs-or retained ancestrally duplicated genes-from ancient genome-wide duplication. These comparative spider genome analyses can serve as a model to understand how positive selection continually shapes ancestral duplications in generating novel traits today within and between diverse taxonomic groups.

High-strength and ultra-tough supramolecular polyamide spider silk fibers assembled via specific covalent and reversible hydrogen bonds

Achieving ultra-high tensile strength and exceptional toughness is a longstanding goal for structural materials. However, previous attempts using covalent and non-covalent bonds have failed, leading to the belief that these two properties are mutually exclusive. Consequently, commercial fibers have been forced to compromise between tensile strength and toughness, as seen in the differences between nylon and Kevlar. To address this challenge, we drew inspiration from the disparate tensile strength and toughness of nylon and Kevlar, both of which are polyamide fibers, and developed an innovative approach that combines specific intermolecular disulfide bonds and reversible hydrogen bonds to create ultra-strong and ultra-tough polyamide spider silk fibers. Our resulting Supramolecular polyamide spider silk, which has a maximum molecular weight of 1084 kDa, exhibits high tensile strength (1180 MPa) and extraordinary toughness (433 MJ/m3), surpassing Kevlar's toughness 8-fold. This breakthrough presents a new opportunity for the sustainable development of spider silk as an environmentally friendly alternative to synthetic commercial fibers, as spider silk is composed of amino acids. Future research could explore the use of these techniques and fundamental knowledge to develop other super materials in various mechanical fields, with the potential to improve people's lives in many ways. STATEMENT OF SIGNIFICANCE: • By emulating synthetic commercial fibers such as nylon and polyethylene, we have successfully produced supramolecular-weight polyamide spider silk fibers with a molecular weight of 1084 kDa through a unique covalent bond-mediated linear polymerization reaction of spider silk protein molecules. This greatly surpasses the previous record of a maximum molecular weight of 556 kDa. • We obtained supramolecular polyamide spider silk fibers with both high-tensile strength and toughness. The stress at break is 1180 MPa, and the toughness is 8 times that of kevlar, reaching 433 MJ/m3. • Our results challenge the notion that it is impossible to manufacture fibers with both ultra-high tensile strength and ultra-toughness, and provide theoretical guidance for developing environmentally friendly and sustainable structural materials that meet industrial needs.

Physical Properties of the Second Type of Aciniform Spidroin (AcSp2) from Neoscona theisi Reveal a pH-Dependent Self-Assembly Repetitive Domain

Orb-weaving spiders can use an array of specialized silks with diverse mechanical properties and functions for daily survival. Of all spider silk types, aciniform silk is the toughest silk fiber that combines high strength and elasticity. Although aciniform spidroins (AcSp) are the main protein in aciniform silks, their complete genes have rarely been characterized until now. Moreover, the structural and physical properties of AcSp variant proteins within the species are also unclear. Here, we present three full-length AcSp genes (named AcSp1A, AcSp1B, and AcSp2) from the orb-weaving spider Neoscona theisi and investigate the structural and mechanical features of these three AcSp repetitive domains. We demonstrate that all three AcSp proteins have mainly α-helical structural features in neutral solution and high thermal stability. Significantly, the AcSp2 repetitive domain shows a pH-dependent structural transition from α to β conformations and can self-assemble into amyloid fibrils under acidic conditions, which is the first reported AcSp repetitive domain with pH-dependent self-assembly capacity. Compared with the other two AcSp spidroins, AcSp2 demonstrated the lowest expression level in the aciniform gland but had the highest strength for its silk fiber. Collectively, our findings provide new insight into the physical properties of each component of aciniform silk and expand the repertoire of known spidroin sequences for the synthesis of artificial silk materials.

Disabling spidroin N-terminal homologs' reverse reaction unveils why its intermolecular disulfide bonds have not evolved for 380 million years

Spiders, ubiquitous predators known for their powerful silks, rely on spidroins that self-assemble from high-concentration solutions stored in silk glands, which are mediated by the NT and CT domains. CT homodimers containing intermolecular disulfide bonds enhance silk performance, promoting spider survival and reproduction. However, no NT capable of forming such disulfide bonds has been identified. Our study reveals that NT homodimers with sulfur substitution can form under alkaline conditions, shedding light on why spiders have not evolved intermolecular disulfide bonds in the NT module during their 380 million years of evolution. This discovery significantly advances our comprehension of spider evolution and silk spinning mechanisms, while also providing novel insights into protein storage, assembly, as well as the mechanisms and therapeutic strategies for neurodegenerative diseases associated with protein aggregation.

The Spider Silk Standardization Initiative (S3I): A powerful tool to harness biological variability and to systematize the characterization of major ampullate silk fibers spun by spiders from suburban Sydney, Australia

The true stress-true strain curves of 11 Australian spider species from the Entelegynae lineage were tensile tested and classified based on the values of the alignment parameter, α*, in the framework of the Spider Silk Standardization Initiative (S3I). The application of the S3I methodology allowed the determination of the alignment parameter in all cases, and were found to range between α* = 0.03 and α* = 0.65. These data, in combination with previous results on other species included in the Initiative, were exploited to illustrate the potential of this approach by testing two simple hypotheses on the distribution of the alignment parameter throughout the lineage: (1) whether a uniform distribution may be compatible with the values obtained from the studied species, and (2) whether any trend may be established between the distribution of the α* parameter and phylogeny. In this regard, the lowest values of the α* parameter are found in some representatives of the Araneidae group, and larger values seem to be found as the evolutionary distance from this group increases. However, a significant number of outliers to this apparent general trend in terms of the values of the α* parameter are described.

Silk Assembly against Hydrophobic Surfaces─Modeling and Imaging of Formation of Nanofibrils

A detailed insight about the molecular organization behind spider silk assembly is valuable for the decoding of the unique properties of silk. The recombinant partial spider silk protein 4RepCT contains four poly-alanine/glycine-rich repeats followed by an amphiphilic C-terminal domain and has shown the capacity to self-assemble into fibrils on hydrophobic surfaces. We herein use molecular dynamic simulations to address the structure of 4RepCT and its different parts on hydrophobic versus hydrophilic surfaces. When 4RepCT is placed in a wing arrangement model and periodically repeated on a hydrophobic surface, β-sheet structures of the poly-alanine repeats are preserved, while the CT part is settled on top, presenting a fibril with a height of ∼7 nm and a width of ∼11 nm. Both atomic force microscopy and cryo-electron microscopy imaging support this model as a possible fibril formation on hydrophobic surfaces. These results contribute to the understanding of silk assembly and alignment mechanism onto hydrophobic surfaces.

Anchor threads can double the insect flight energy absorbed by spider orb webs

To successfully capture flying insect prey, a spider's orb web must withstand the energy of impact without the silk breaking. In this study, we examined the anchor threads: the silk lines that anchor the main capture area of the web to the surrounding environment. These anchor threads can account for a large portion of the web, yet are usually excluded from experiments and simulations. We compared projectile capture and kinetic energy absorption between webs with and without access to anchor threads. Webs with anchor threads captured significantly more projectiles and absorbed significantly more energy than those with constrained anchors. This is likely because the anchor threads increase web compliance, resulting in webs with the ability to catch high-energy flying insects without breaking. Anchor threads are one example of how different types of web architecture expand the range of possible prey capture strategies by enabling the web to withstand greater impacts.

Complete gene sequence and mechanical property of the fourth type of major ampullate silk protein

Spiders spin a great diversity of silk types for daily survival and reproduction. Of the six orb-weaver silk types, the dragline silk forming orb web frame attracts the most attention because of its extremely high tensile strength and toughness. So far, four types of major ampullate silk proteins (MaSp1-4) that make up dragline silk have been identified. These MaSp types have diversified amino acid motifs that underlie the impressive mechanical property of dragline silk by forming particular structures. Existing knowledge of MaSp4 proteins is fragmented, making it difficult to illuminate the structure and function of MaSp4. Here, we report the full-length MaSp4 gene with 11,334 bp from the orb-weaving spider Araneus ventricosus. Removing the only intron, the spliced complete transcript of MaSp4 gene is 6897 bp and encodes 2298 amino acids. Analysis of the primary structure of A. ventricosus MaSp4 protein reveals the repetitive region lacks poly-A and GGX motifs but has the unique GPGPQ motifs. Quantitative real-time PCR analyses show high levels of MaSp4 mRNA were detected in major ampullate gland. Structural characterization using CD- and FTIR sepctroscopy reveals a mainly α-helical solution conformation and a very high β-turn content within fibers. Collectively, our new findings provide complete template for recombinant silk protein with specific properties and support that the GPGPQ motif found in MaSp4 could increase flexibility in dragline silk by packing in more β-turns, expanding the repertoire of sequences known to form β-turn that is available for artificial chimeric silk fibers. STATEMENT OF SIGNIFICANCE: Dragline silk forming orb web frame attracts the most attention because of its extremely high tensile strength and toughness. So far, four types of major ampullate silk proteins (MaSp1-4) that make up dragline silk have been identified. Existing knowledge of MaSp4 proteins is fragmented, making it difficult to illuminate the structure and function of MaSp4. Here, we report the full-length MaSp4 gene from the orb-weaving spider Araneus ventricosus. We further identify the sequence, structure, and mechanical property of MaSp4 protein, providing a new insight into the structure-funtion relationships associated with MaSp4. Collectively, our new findings provide complete template for recombinant silk protein with specific properties and support that the GPGPQ motif found in MaSp4 could increase flexibility in dragline silk by packing in more β-turns, expanding the repertoire of sequences known to form β-turn that is available for artificial chimeric silk fibers.

The Inverse Krogh Principle: All Organisms Are Worthy of Study

AbstractKrogh's principle states, "For such a large number of problems there will be some animal of choice, or a few such animals, on which it can be most conveniently studied." The downside of picking a question first and then finding an ideal organism on which to study it is that it will inevitably leave many organisms neglected. Here, we promote the inverse Krogh principle: all organisms are worthy of study. The inverse Krogh principle and the Krogh principle are not opposites. Rather, the inverse Krogh principle emphasizes a different starting point for research: start with a biological unit, such as an organism, clade, or specific organism trait, then seek or create tractable research questions. Even the hardest-to-study species have research questions that can be asked of them: Where does it fall within the tree of life? What resources does it need to survive and reproduce? How does it differ from close relatives? Does it have unique adaptations? The Krogh and inverse Krogh approaches are complementary, and many research programs naturally include both. Other considerations for picking a study species include extreme species, species informative for phylogenetic analyses, and the creation of models when a suitable species does not exist. The inverse Krogh principle also has pitfalls. A scientist that picks the organism first might choose a research question not really suited to the organism, and funding agencies rarely fund organism-centered grant proposals. The inverse Krogh principle does not call for all organisms to receive the same amount of research attention. As knowledge continues to accumulate, some organisms-models-will inevitably have more known about them than others. Rather, it urges a broader search across organismal diversity to find sources of inspiration for research questions and the motivation needed to pursue them.

Characterization of two full-length tubuliform silk gene sequences from Neoscona theisi reveals intragenic concerted evolution and multiple copies in genome

Orb-web weaving spiders use a variety of silk types for particular tasks, and each silk type is composed of at least two spider silk proteins (spidroins). In the early stage of divergence, however, the molecular evolutionary processes act on spidroin variants are still unclear because of a lack of knowledge for full-length paralogous and orthologous gene sequences among closely related species. Here, we present two complete gene sequences encoding the tubuliform spidroin TuSp1 variants (TuSp1-v2 and TuSp1-v3) from orb-weaving spider Neoscona theisi. Both N. theisi TuSp1-v2 and TuSp1-v3 genes contain a single enormous exon (14,139 bp for TuSp1-v2 and 13,152 bp for TuSp1-v3) and dozens of tandemly arrayed repeats (25 repeats for TuSp1-v2 and 23 repeats for TuSp1-v3) with extreme intragenic homogenization. The pattern of expression for these two spidroins revealed that the level of TuSp1-v3 mRNA is ~3-fold higher than that of TuSp1-v2 in tubuliform gland. Phylogenetic analyses of spidroins not only show the occurrence of a gene duplication event for TuSp1-v2 and TuSp1-v3 in the common ancestor of the Neoscona and Araneus lineage but reinforce the role of concerted evolution for the extreme homogenization of TuSp1 repeats.

Rapid molecular diversification and homogenization of clustered major ampullate silk genes in Argiope garden spiders

The evolutionary diversification of orb-web weaving spiders is closely tied to the mechanical performance of dragline silk. This proteinaceous fiber provides the primary structural framework of orb web architecture, and its extraordinary toughness allows these structures to absorb the high energy of aerial prey impact. The dominant model of dragline silk molecular structure involves the combined function of two highly repetitive, spider-specific, silk genes (spidroins)-MaSp1 and MaSp2. Recent genomic studies, however, have suggested this framework is overly simplistic, and our understanding of how MaSp genes evolve is limited. Here we present a comprehensive analysis of MaSp structural and evolutionary diversity across species of Argiope (garden spiders). This genomic analysis reveals the largest catalog of MaSp genes found in any spider, driven largely by an expansion of MaSp2 genes. The rapid diversification of Argiope MaSp genes, located primarily in a single genomic cluster, is associated with profound changes in silk gene structure. MaSp2 genes, in particular, have evolved complex hierarchically organized repeat units (ensemble repeats) delineated by novel introns that exhibit remarkable evolutionary dynamics. These repetitive introns have arisen independently within the genus, are highly homogenized within a gene, but diverge rapidly between genes. In some cases, these iterated introns are organized in an alternating structure in which every other intron is nearly identical in sequence. We hypothesize that this intron structure has evolved to facilitate homogenization of the coding sequence. We also find evidence of intergenic gene conversion and identify a more diverse array of stereotypical amino acid repeats than previously recognized. Overall, the extreme diversification found among MaSp genes requires changes in the structure-function model of dragline silk performance that focuses on the differential use and interaction among various MaSp paralogs as well as the impact of ensemble repeat structure and different amino acid motifs on mechanical behavior.

The properties of native Trichonephila dragline silk and its biomedical applications

Spider silk has fascinated mankind for millennia, but it is only in recent decades that scientific research has begun to unravel all its characteristics and applications. The uniqueness of spider silk resides in its versatility, in which a combination of high strength and extensibility results in extraordinary toughness, superior to almost all natural and man-made fibers. Dragline silk consists of proteins with highly repetitive amino acid sequences, which have been correlated with specific secondary structures responsible for its physical properties. The native fiber also shows high cytocompatibility coupled with low immunogenicity, making it a promising natural biomaterial for numerous biomedical applications. Recently, novel technologies have enabled new insights into the material and biomedical properties of silk. Due to the increasing interest in spider silk, as well as the desire to produce synthetic alternatives, we present an update on the current knowledge of silk fibers produced by the spider genus Trichonephila.

Functionalization and Reinforcement of Recombinant Spider Dragline Silk Fibers by Confined Nanoparticle Formation

Spider dragline silk is a remarkable protein fiber that is mechanically superior to almost any other natural or synthetic material. As a sustainable supply of natural dragline silk is not feasible, recombinant production of silk fibers with native-like mechanical properties and non-native physiochemical functions is highly desirable for various applications. Here, we report a new strategy for simultaneous functionalization and reinforcement of recombinant spider silk fibers by confined nanoparticle formation. First, a mimic silk protein (N16C) of spider Trichonephila clavipes was recombinantly produced and wet-spun into fibers. Drawing the as-spun fibers in water led to post-drawn fibers more suitable for the templated synthesis of nanoparticles (NPs) with uniform distribution throughout the synthetic fibers. This was exemplified using a chemical precipitation reaction to generate copper sulfide nanoparticle-incorporated fibers. These fibers and the derived fabric displayed a significant photothermal effect as their temperatures could increase to over 40 °C from room temperature within 3 min under near-infrared laser irradiation or simulated sunlight. In addition, the tensile strength and toughness of the nanofunctionalized fibers were greatly enhanced, and the toughness of these synthetic fibers could reach 160.1 ± 21.4 MJ m^-3, which even exceeds that of natural spider dragline silk (111.19 ± 30.54 MJ m^-3). Furthermore, the confined synthesis of gold NPs via a redox reaction was shown to improve the ultraviolet-protective effect and tensile mechanical properties of synthetic silk fibers. These results suggest that our strategy may have great potential for creating functional and high-performance spider silk fibers and fabrics for wide applications.

Correlated evolution between orb weaver glue droplets and supporting fibres maintains their distinct biomechanical roles in adhesion

Orb weaving spiders employ a 'silken toolkit' to accomplish a range of tasks, including retaining prey that strike their webs. This is accomplished by a viscous capture spiral thread that features tiny glue droplets, supported by a pair of elastic flagelliform fibres. Each droplet contains a glycoprotein core responsible for adhesion. However, prey retention relies on the integrated performance of multiple glue droplets and their supporting fibres, with previous studies demonstrating that a suspension bridge forms, whose biomechanics sum the adhesive forces of multiple droplets while dissipating the energy of the struggling insect. While the interdependence of the droplet's glycoprotein and flagelliform fibres for functional adhesion is acknowledged, there has been no direct test of this hypothesized linkage between the material properties of each component. Spider mass, which differs greatly across orb weaving species, also has the potential to affect flagelliform fibre and glycoprotein material properties. Previous studies have linked spider mass to capture thread performance but have not examined the relationship between spider mass and thread material properties. We extend earlier studies to examine these relationships in 16 orb weaving species using phylogenetic generalized least squares. This analysis revealed that glycoprotein stiffness (elastic modulus) was correlated with flagelliform fibre stiffness, and that spider mass was related to the glycoprotein volume, flagelliform fibre cross-sectional area and droplets per unit thread length. By shaping the elastic moduli of glycoprotein adhesive and flagelliform fibres, natural selection has maintained the biomechanical integration of this adhesive system.

A review on advances in the applications of spider silk in biomedical issues

Spider silk, as one of the hardest natural and biocompatible substances with extraordinary strength and flexibility, have become an ideal option in various areas of science and have made their path onto the biomedical industry. Despite its growing popularity, the difficulties in the extraction of silks from spiders and farming them have made it unaffordable and almost impossible for industrial scale. Biotechnology helped production of spider silks recombinantly in different hosts and obtaining diverse morphologies out of them based on different processing and assembly procedures. Herein, the characteristics of these morphologies and their advantages and disadvantages are summarized. A detailed view about applications of recombinant silks in skin regeneration and cartilage, tendon, bone, teeth, cardiovascular, and neural tissues engineering are brought out, where there is a need for strong scaffolds to support cell growth. Likewise, spider silk proteins have applications as conduit constructs, medical sutures, and 3D printer bioinks. Other characteristics of spider silks, such as low immunogenicity, hydrophobicity, homogeneity, and adjustability, have attracted much attention in drug and gene delivery. Finally, the challenges and obstacles ahead for industrializing the production of spider silk proteins in sufficient quantities in biomedicine, along with solutions to overcome these barriers, are discussed.

A Common Endocrine Signature Marks the Convergent Evolution of an Elaborate Dance Display in Frogs

AbstractUnrelated species often evolve similar phenotypic solutions to the same environmental problem, a phenomenon known as convergent evolution. But how do these common traits arise? We address this question from a physiological perspective by assessing how convergence of an elaborate gestural display in frogs (foot-flagging) is linked to changes in the androgenic hormone systems that underlie it. We show that the emergence of this rare display in unrelated anuran taxa is marked by a robust increase in the expression of androgen receptor (AR) messenger RNA in the musculature that actuates leg and foot movements, but we find no evidence of changes in the abundance of AR expression in these frogs' central nervous systems. Meanwhile, the magnitude of the evolutionary change in muscular AR and its association with the origin of foot-flagging differ among clades, suggesting that these variables evolve together in a mosaic fashion. Finally, while gestural displays do differ between species, variation in the complexity of a foot-flagging routine does not predict differences in muscular AR. Altogether, these findings suggest that androgen-muscle interactions provide a conduit for convergence in sexual display behavior, potentially providing a path of least resistance for the evolution of motor performance.

Unconventional Spidroin Assemblies in Aqueous Dope for Spinning into Tough Synthetic Fibers

Spider dragline silk is a remarkable fiber made by spiders from an aqueous solution of spidroins, and this feat is largely attributed to the tripartite domain architecture of the silk proteins leading to the hierarchical assembly at the nano- and microscales. Although individual amino- and carboxy-terminal domains have been proposed to relate to silk protein assembly, their tentative synergizing roles in recombinant spidroin storage and spinning into synthetic fibers remain elusive. Here, we show biosynthesis and self-assembly of a mimic spidroin composed of amino- and carboxy-terminal domains bracketing 16 consensus repeats of the core region from spider Trichonephila clavipes. The presence of both termini was found essential for self-assembly of the mimic spidroin termed N16C into fibril-like (rather than canonical micellar) nanostructures in concentrated aqueous dope and ordered alignment of these nanofibrils upon extrusion into an acidic coagulation bath. This ultimately led to continuous, macroscopic fibers with a tensile fracture toughness of 100.9 ± 13.2 MJ m^-3, which is comparable to that of their natural counterparts. We also found that the recombinant proteins lacking one or both termini were unable to similarly preassemble into fibrillar nanostructures in dopes and thus yielded inferior fiber properties. This work thereby highlights the synergizing role of terminal domains in the storage and processing of recombinant analogues into tough synthetic fibers.

Golden orb-weaving spider (Trichonephila clavipes) silk genes with sex-biased expression and atypical architectures

Spider silks are renowned for their high-performance mechanical properties. Contributing to these properties are proteins encoded by the spidroin (spider fibroin) gene family. Spidroins have been discovered mostly through cDNA studies of females based on the presence of conserved terminal regions and a repetitive central region. Recently, genome sequencing of the golden orb-web weaver, Trichonephila clavipes, provided a complete picture of spidroin diversity. Here, we refine the annotation of T. clavipes spidroin genes including the reclassification of some as non-spidroins. We rename these non-spidroins as spidroin-like (SpL) genes because they have repetitive sequences and amino acid compositions like spidroins, but entirely lack the archetypal terminal domains of spidroins. Insight into the function of these spidroin and SpL genes was then examined through tissue- and sex-specific gene expression studies. Using qPCR, we show that some silk genes are upregulated in male silk glands compared to females, despite males producing less silk in general. We also find that an enigmatic spidroin that lacks a spidroin C-terminal domain is highly expressed in silk glands, suggesting that spidroins could assemble into fibers without a canonical terminal region. Further, we show that two SpL genes are expressed in silk glands, with one gene highly evolutionarily conserved across species, providing evidence that particular SpL genes are important to silk production. Together, these findings challenge long-standing paradigms regarding the evolutionary and functional significance of the proteins and conserved motifs essential for producing spider silks.

Two novel tubuliform silk gene sequences from Araneus ventricosus provide evidence for multiple loci in genome

Spiders produce a diversity of silk fibers from multiple morphologically distinct silk glands for specific tasks, and each silk type primarily composed of one or more particular silk proteins encoded by silk gene family members believed to generated by duplication and divergence of ancient silk genes. Egg case silks spun from tubuliform glands are used to construct the tough outer structure of egg cases, are important for their reproduction. Here we present two novel complete TuSp1 sequences from orb weaving spider Araneus ventricosus. Alignment of the two spidroin iterated repeats showed both extreme intragenic homogenization. The pairwise Ka/Ks analysis revealed the terminal and repetitive regions for three TuSp1 loci including the reported TuSp1 gene are all under purifying selection. Phylogenetic analysis showed the two new TuSp1 variants could derive from recent duplication events.

Silk fibroin/hydroxyapatite scaffold: a highly compatible material for bone regeneration

In recent years remarkable efforts have been made to produce artificial bone through tissue engineering techniques. Silk fibroin (SF) and hydroxyapatite (HA) have been used in bone tissue regeneration as biomaterials due to mechanical properties of SF and biocompatibility of HA. There has been growing interest in developing SF/HA composites to reduce bone defects. In this regard, several attempts have been made to study the biocompatibility and osteoconductive properties of this material. This article overviews the recent advance from last few decades in terms of the preparative methods and application of SF/HA in bone regeneration. Its first part is related to SF that presents the most common sources, preparation methods and comparison of SF with other biomaterials. The second part illustrates the importance of HA by providing information about its production and properties. The third part presents comparative studies of SF/HA composites with different concentrations of HA along with methods of preparation of composites and their applications.

Preparation and characterization of Nephila clavipes tubuliform silk gut

Tubuliform silk glands were dissected from Nephila clavipes spiders, and silk gut fibers were produced by immersing the glands in a mild acid solution and subsequent stretching. The tensile properties of the as produced fibers were obtained through tensile tests, and the stress-strain curves were compared with those of naturally spun tubuliform silk fibers. The influence on the mechanical properties of the fibers after immersion in water and drying was also discerned. The microstructure of the silk guts was obtained by X-ray diffraction (XRD) and infrared spectroscopy (FTIR). It was found that the stress-strain curves of the stretched tubuliform silk guts concur with those of their natural counterparts (tubuliform silk fibers).

Silk genes and silk gene expression in the spider Tengella perfuga (Zoropsidae), including a potential cribellar spidroin (CrSp)

Most spiders spin multiple types of silk, including silks for reproduction, prey capture, and draglines. Spiders are a megadiverse group and the majority of spider silks remain uncharacterized. For example, nothing is known about the silk molecules of Tengella perfuga, a spider that spins sheet webs lined with cribellar silk. Cribellar silk is a type of adhesive capture thread composed of numerous fibrils that originate from a specialized plate-like spinning organ called the cribellum. The predominant components of spider silks are spidroins, members of a protein family synthesized in silk glands. Here, we use silk gland RNA-Seq and cDNA libraries to infer T. perfuga silks at the protein level. We show that T. perfuga spiders express 13 silk transcripts representing at least five categories of spider silk proteins (spidroins). One category is a candidate for cribellar silk and is thus named cribellar spidroin (CrSp). Studies of ontogenetic changes in web construction and spigot morphology in T. perfuga have documented that after sexual maturation, T. perfuga females continue to make capture webs but males halt web maintenance and cease spinning cribellar silk. Consistent with these observations, our candidate CrSp was expressed only in females. The other four spidroin categories correspond to paralogs of aciniform, ampullate, pyriform, and tubuliform spidroins. These spidroins are associated with egg sac and web construction. Except for the tubuliform spidroin, the spidroins from T. perfuga contain novel combinations of amino acid sequence motifs that have not been observed before in these spidroin types. Characterization of T. perfuga silk genes, particularly CrSp, expand the diversity of the spidroin family and inspire new structure/function hypotheses.

The Nephila clavipes genome highlights the diversity of spider silk genes and their complex expression

Spider silks are the toughest known biological materials, yet are lightweight and virtually invisible to the human immune system, and they thus have revolutionary potential for medicine and industry. Spider silks are largely composed of spidroins, a unique family of structural proteins. To investigate spidroin genes systematically, we constructed the first genome of an orb-weaving spider: the golden orb-weaver (Nephila clavipes), which builds large webs using an extensive repertoire of silks with diverse physical properties. We cataloged 28 Nephila spidroins, representing all known orb-weaver spidroin types, and identified 394 repeated coding motif variants and higher-order repetitive cassette structures unique to specific spidroins. Characterization of spidroin expression in distinct silk gland types indicates that glands can express multiple spidroin types. We find evidence of an alternatively spliced spidroin, a spidroin expressed only in venom glands, evolutionary mechanisms for spidroin diversification, and non-spidroin genes with expression patterns that suggest roles in silk production.

High-toughness silk produced by a transgenic silkworm expressing spider (Araneus ventricosus) dragline silk protein

Spider dragline silk is a natural fiber that has excellent tensile properties; however, it is difficult to produce artificially as a long, strong fiber. Here, the spider (Araneus ventricosus) dragline protein gene was cloned and a transgenic silkworm was generated, that expressed the fusion protein of the fibroin heavy chain and spider dragline protein in cocoon silk. The spider silk protein content ranged from 0.37 to 0.61% w/w (1.4–2.4 mol%) native silkworm fibroin. Using a good silk-producing strain, C515, as the transgenic silkworm can make the raw silk from its cocoons for the first time. The tensile characteristics (toughness) of the raw silk improved by 53% after the introduction of spider dragline silk protein; the improvement depended on the quantity of the expressed spider dragline protein. To demonstrate the commercial feasibility for machine reeling, weaving, and sewing, we used the transgenic spider silk to weave a vest and scarf; this was the first application of spider silk fibers from transgenic silkworms.

Complex gene expression in the dragline silk producing glands of the Western black widow (Latrodectus hesperus)

Background

Orb-web and cob-web weaving spiders spin dragline silk fibers that are among the strongest materials known. Draglines are primarily composed of MaSp1 and MaSp2, two spidroins (spider fibrous proteins) expressed in the major ampullate (MA) silk glands. Prior genetic studies of dragline silk have focused mostly on determining the sequence of these spidroins, leaving other genetic aspects of silk synthesis largely uncharacterized.

Results

Here, we used deep sequencing to profile gene expression patterns in the Western black widow, Latrodectus hesperus. We sequenced millions of 3′-anchored “tags” of cDNAs derived either from MA glands or control tissue (cephalothorax) mRNAs, then associated the tags with genes by compiling a reference database from our newly constructed normalized L. hesperus cDNA library and published L. hesperus sequences. We were able to determine transcript abundance and alternative polyadenylation of each of three loci encoding MaSp1. The ratio of MaSp1:MaSp2 transcripts varied between individuals, but on average was similar to the estimated ratio of MaSp1:MaSp2 in dragline fibers. We also identified transcription of TuSp1 in MA glands, another spidroin family member that encodes the primary component of egg-sac silk, synthesized in tubuliform glands. In addition to the spidroin paralogs, we identified 30 genes that are more abundantly represented in MA glands than cephalothoraxes and represent new candidates for involvement in spider silk synthesis.

Conclusions

Modulating expression rates of MaSp1 variants as well as MaSp2 and TuSp1 could lead to differences in mechanical properties of dragline fibers. Many of the newly identified candidate genes likely encode secreted proteins, suggesting they could be incorporated into dragline fibers or assist in protein processing and fiber assembly. Our results demonstrate previously unrecognized transcript complexity in spider silk glands.

A molecular phylogeny of nephilid spiders: evolutionary history of a model lineage

The pantropical orb web spider family Nephilidae is known for the most extreme sexual size dimorphism among terrestrial animals. Numerous studies have made Nephilidae, particularly Nephila, a model lineage in evolutionary research. However, a poorly understood phylogeny of this lineage, relying only on morphology, has prevented thorough evolutionary syntheses of nephilid biology. We here use three nuclear and five mitochondrial genes for 28 out of 40 nephilid species to provide a more robust nephilid phylogeny and infer clade ages in a fossil-calibrated Bayesian framework. We complement the molecular analyses with total evidence analysis including morphology. All analyses find strong support for nephilid monophyly and exclusivity and the monophyly of the genera Herennia and Clitaetra. The inferred phylogenetic structure within Nephilidae is novel and conflicts with morphological phylogeny and traditional taxonomy. Nephilengys species fall into two clades, one with Australasian species (true Nephilengys) as sister to Herennia, and another with Afrotropical species (Nephilingis Kuntner new genus) as sister to a clade containing Clitaetra plus most currently described Nephila. Surprisingly, Nephila is also diphyletic, with true Nephila containing N. pilipes+N. constricta, and the second clade with all other species sister to Clitaetra; this "Nephila" clade is further split into an Australasian clade that also contains the South American N. sexpunctata and the Eurasian N. clavata, and an African clade that also contains the Panamerican N. clavipes. An approximately unbiased test constraining the monophyly of Nephilengys, Nephila, and Nephilinae (Nephila, Nephilengys, Herennia), respectively, rejected Nephilengys monophyly, but not that of Nephila and Nephilinae. Further data are therefore necessary to robustly test these two new, but inconclusive findings, and also to further test the precise placement of Nephilidae within the Araneoidea. For divergence date estimation we set the minimum bound for the stems of Nephilidae at 40 Ma and of Nephila at 16 Ma to accommodate Palaeonephila from Baltic amber and Dominican Nephila species, respectively. We also calibrated and dated the phylogeny under three different interpretations of the enigmatic 165 Ma fossil Nephila jurassica, which we suspected based on morphology to be misplaced. We found that by treating N. jurassica as stem Nephila or nephilid the inferred clade ages were vastly older, and the mitochondrial substitution rates much slower than expected from other empirical spider data. This suggests that N. jurassica is not a Nephila nor a nephilid, but possibly a stem orbicularian. The estimated nephilid ancestral age (40-60 Ma) rejects a Gondwanan origin of the family as most of the southern continents were already split at that time. The origin of the family is equally likely to be African, Asian, or Australasian, with a global biogeographic history dominated by dispersal events. A reinterpretation of web architecture evolution suggests that a partially arboricolous, asymmetric orb web with a retreat, as exemplified by both groups of "Nephilengys", is plesiomorphic in Nephilidae, that this architecture was modified into specialized arboricolous webs in Herennia and independently in Clitaetra, and that the web became aerial, gigantic, and golden independently in both "Nephila" groups. The new topology questions previously hypothesized gradual evolution of female size from small to large, and rather suggests a more mosaic evolutionary pattern with independent female size increases from medium to giant in both "Nephila" clades, and two reversals back to medium and small; combined with male size evolution, this pattern will help detect gross evolutionary events leading to extreme sexual size dimorphism, and its morphological and behavioral correlates.

Biomaterial evolution parallels behavioral innovation in the origin of orb-like spider webs

Correlated evolution of traits can act synergistically to facilitate organism function. But, what happens when constraints exist on the evolvability of some traits, but not others? The orb web was a key innovation in the origin of >12,000 species of spiders. Orb evolution hinged upon the origin of novel spinning behaviors and innovations in silk material properties. In particular, a new major ampullate spidroin protein (MaSp2) increased silk extensibility and toughness, playing a critical role in how orb webs stop flying insects. Here, we show convergence between pseudo-orb-weaving Fecenia and true orb spiders. As in the origin of true orbs, Fecenia dragline silk improved significantly compared to relatives. But, Fecenia silk lacks the high compliance and extensibility found in true orb spiders, likely due in part to the absence of MaSp2. Our results suggest how constraints limit convergent evolution and provide insight into the evolution of nature's toughest fibers.

Sequential origin in the high performance properties of orb spider dragline silk

Major ampullate (MA) dragline silk supports spider orb webs, combining strength and extensibility in the toughest biomaterial. MA silk evolved ~376 MYA and identifying how evolutionary changes in proteins influenced silk mechanics is crucial for biomimetics, but is hindered by high spinning plasticity. We use supercontraction to remove that variation and characterize MA silk across the spider phylogeny. We show that mechanical performance is conserved within, but divergent among, major lineages, evolving in correlation with discrete changes in proteins. Early MA silk tensile strength improved rapidly with the origin of GGX amino acid motifs and increased repetitiveness. Tensile strength then maximized in basal entelegyne spiders, ~230 MYA. Toughness subsequently improved through increased extensibility within orb spiders, coupled with the origin of a novel protein (MaSp2). Key changes in MA silk proteins therefore correlate with the sequential evolution high performance orb spider silk and could aid design of biomimetic fibers.

Post-secretion processing influences spider silk performance

Phenotypic variation facilitates adaptations to novel environments. Silk is an example of a highly variable biomaterial. The two-spidroin (MaSp) model suggests that spider major ampullate (MA) silk is composed of two proteins-MaSp1 predominately contains alanine and glycine and forms strength enhancing β-sheet crystals, while MaSp2 contains proline and forms elastic spirals. Nonetheless, mechanical properties can vary in spider silks without congruent amino acid compositional changes. We predicted that post-secretion processing causes variation in the mechanical performance of wild MA silk independent of protein composition or spinning speed across 10 species of spider. We used supercontraction to remove post-secretion effects and compared the mechanics of silk in this 'ground state' with wild native silks. Native silk mechanics varied less among species compared with 'ground state' silks. Variability in the mechanics of 'ground state' silks was associated with proline composition. However, variability in native silks did not. We attribute interspecific similarities in the mechanical properties of native silks, regardless of amino acid compositions, to glandular processes altering molecular alignment of the proteins prior to extrusion. Such post-secretion processing may enable MA silk to maintain functionality across environments, facilitating its function as a component of an insect-catching web.

Comparison of fibroin cDNAs from webspinning insects: insight into silk formation and function

Embiopterans (webspinning insects) are renowned for their prolific use of silk. These organisms spin silk to construct elaborate networks of tubes in which they live, forage, and reproduce. The silken galleries are essential for protecting these soft-bodied insects from predators and other environmental hazards. Despite the ecological importance of embiopteran silk, very little is known about its constituent proteins. Here, we characterize the silk protein cDNAs from four embiopteran species to better understand the function and evolution of these adaptive molecules. We show that webspinner fibroins (silk proteins) are highly repetitive in sequence and possess several conserved characteristics, despite differences in habitat preferences across species. The most striking similarities are in the codon usage biases of the fibroin genes, particularly in the repetitive regions, as well as sequence conservation of the carboxyl-terminal regions of the fibroins. Based on analyses of the silk genes, we propose hypotheses regarding codon bias and its effect on the translation and replication of these unusual genes. Furthermore, we discuss the significance of specific fibroin motifs to the mechanical and structural characteristics of silk fibers. Lastly, we report that the conservation of webspinner fibroin carboxyl-terminal regions suggests that fiber formation may occur through a mechanism analogous to that found in Lepidoptera. From these results, insight is gained into the tempo and mode of evolution that has shaped embiopteran fibroins.

High-performance spider webs: integrating biomechanics, ecology and behaviour

Spider silks exhibit remarkable properties, surpassing most natural and synthetic materials in both strength and toughness. Orb-web spider dragline silk is the focus of intense research by material scientists attempting to mimic these naturally produced fibres. However, biomechanical research on spider silks is often removed from the context of web ecology and spider foraging behaviour. Similarly, evolutionary and ecological research on spiders rarely considers the significance of silk properties. Here, we highlight the critical need to integrate biomechanical and ecological perspectives on spider silks to generate a better understanding of (i) how silk biomechanics and web architectures interacted to influence spider web evolution along different structural pathways, and (ii) how silks function in an ecological context, which may identify novel silk applications. An integrative, mechanistic approach to understanding silk and web function, as well as the selective pressures driving their evolution, will help uncover the potential impacts of environmental change and species invasions (of both spiders and prey) on spider success. Integrating these fields will also allow us to take advantage of the remarkable properties of spider silks, expanding the range of possible silk applications from single threads to two- and three-dimensional thread networks.

Evolution of supercontraction in spider silk: structure–function relationship from tarantulas to orb-weavers

Spider silk is a promising biomaterial with impressive performance. However, some spider silks also ‘supercontract’ when exposed to water, shrinking by up to ∼50% in length. Supercontraction may provide a critical mechanism to tailor silk properties, both for future synthetic silk production and by the spiders themselves. Several hypotheses are proposed for the mechanism and function of supercontraction, but they remain largely untested. In particular, supercontraction may result from a rearrangement of the GPGXX motif within the silk proteins, where G represents glycine, P proline and X is one of a small subset of amino acids. Supercontraction may prevent sagging in wet orb-webs or allow spiders to tailor silk properties for different ecological functions. Because both the molecular structures of silk proteins and how dragline is used in webs differ among species, we can test these hypotheses by comparing supercontraction of silk across diverse spider taxa. In this study we measured supercontraction in 28 spider taxa, ranging from tarantulas to orb-weaving spiders. We found that silk from all species supercontracted, except that of most tarantulas. This suggests that supercontraction evolved at least with the origin of the Araneomorphae, over 200 million years ago. We found differences in the pattern of evolution for two components of supercontraction. Stress generated during supercontraction of a restrained fiber is not associated with changes in silk structure and web architecture. By contrast, the shrink of unrestrained supercontracting fibers is higher for Orbiculariae spiders, whose silk contains high ratios of GPGXX motifs. These results support the hypothesis that supercontraction is caused by a rearrangement of GPGXX motifs in silk, and that it functions to tailor silk material properties.