Bacterial community structure, compartmentalization and activity in a microbial fuel cell

Model-based development of cell voltage control system for modified bio-electro-Fenton process

A modified bio-electro-Fenton (M-BEF) process with a cell voltage control system that improves the efficiency of organic removal and energy savings is demonstrated. The M-BEF process can accomplish bioelectricity generation, H2O2 production, and the Fenton reaction in a continuous-flow reactor. During synthetic wastewater treatment containing biodegradable (glucose) and recalcitrant (biphenyl) organic matter, the effluent chemical oxygen demand (COD) concentration was maintained between 2 and 6 mg L-1. To investigate the impact of different operating schemes on energy usage, model-based design (MBD) modeling and simulations were performed, which showed that COD removal efficiency without an external voltage supply was unstable at < 70 %. The automatic cell voltage control system saved 90 % of the power compared to the continuous cell voltage supply system. Further testing on more environmental samples and pollutants will enable real-time optimization of supplied power and wastewater treatment using the cell voltage control system.

Isolation and Electrochemical Analysis of a Facultative Anaerobic Electrogenic Strain Klebsiella sp. SQ-1

Electricigens decompose organic matter and convert stored chemical energy into electrical energy through extracellular electron transfer. They are significant biocatalysts for microbial fuel cells with practical applications in green energy generation, effluent treatment, and bioremediation. A facultative anaerobic electrogenic strain SQ-1 is isolated from sludge in a biotechnology factory. The strain SQ-1 is a close relative of Klebsiella variicola. Multilayered biofilms form on the surface of a carbon electrode after the isolated bacteria are inoculated into a microbial fuel cell device. This strain produces high current densities of 625 μA cm-2 by using acetate as the carbon source in a three-electrode configuration. The electricity generation performance is also analyzed in a dual-chamber microbial fuel cell. It reaches a maximum power density of 560 mW m-2 when the corresponding output voltage is 0.59 V. The facultative strain SQ-1 utilizes hydrous ferric oxide as an electron acceptor to perform extracellular electricigenic respiration in anaerobic conditions. Since facultative strains possess better properties than anaerobic strains, Klebsiella sp. SQ-1 may be a promising exoelectrogenic strain for applications in microbial electrochemistry.

Lysozyme regulates the extracellular polymer of activated sludge and promotes the formation of electroactive biofilm

The formation of electroactive biofilm from activated sludge on electrode surface is a key step to construct a bio-electrochemical system, yet it is greatly limited by the poor affinity between the bacteria and the electrode interface. Herein, we report a new method to promote the formation of electroactive biofilm by regulating the extracellular polymeric substance (EPS) content in activated sludge with lysozyme. The investigation of the effect of lysozyme treatment on the content of extracellular polymers and the biofilm formation of electroactive bacteria suggests that lysozyme can improve the permeability of the positive bacterial cell membrane and thus increase the EPS content in the activated sludge. The characterizations of electrochemical activity, surface morphology and community structure of the anode biofilm indicate that increasing EPS content promotes the adhesion of the mixed bacteria in the activated sludge on the electrode and results in denser biofilms with better conductivities. The microbial fuel cell (MFC) inoculated with the sludge of high EPS content exhibits the power density up to 2.195 W/m², much higher than that inoculated with the untreated sludge (1.545 W/m²). The strategy of adjusting EPS content in activated sludge with a biological enzyme can effectively enhance the ability of the bacterial community to form biofilms and exhibits great application potentials in the construction of high efficiency bio-electrochemical systems.

Insight into the organic matter degradation enhancement in the bioelectrochemically-assisted sludge treatment wetland: Transformation of the organic matter and microbial community evolution

Sludge treatment wetland (STW) has been widely used to dewater and mineralize the various sludge, but the low degradation ability of organic matter can limit its application. Bioelectrochemistry has been proven to accelerate the degradation of organic compounds and recover bioenergy from the sludge. In this study, a bioelectrochemical-assisted sludge treatment wetland (BE-STW) system was constructed to determine the most common types of degraded organic matter and the functional bacterial community. It was found that the bioelectrochemistry process contributed to a further removal of the total chemical oxygen demand (TCOD) by 19% (±0.6) and the additional soluble chemical oxygen demand (SCOD) value was 64.10% (±0.63), with a voltage output of 0.961 V and a power density of 0.351 W/m³. The hydrophilic and hydrophobic acid fractions of the sludge were preferentially removed in BE-STW. The tryptophan-like protein and fulvic acid-like substances were totally removed, whereas, the hydrolysis of aromatic organic compounds in the neutral and hydrophobic acid fractions was enhanced. Also, the enrichment of Longilinea and Methylophilus improved the hydrolysis of organic matter. Moreover, the high relative abundance of Thauera, Dechloromonas, and Syntrophorhabdus could accelerate the degradation of aromatic compounds in the BE-STW system. The bacteria from the genus Geobacter was predominantly detected (2.48%) in the anodic biofilm on BE-STW. The results showed that bioelectrochemistry could improve the sludge stabilization degree in STW, accelerate the organic matter degradation and hydrolysis efficiency, and harvest bioelectricity, simultaneously. This technology can provide a new pathway to increase the efficiency of the traditional STW systems.

How Comparable are Microbial Electrochemical Systems around the Globe? An Electrochemical and Microbiological Cross-Laboratory Study

A cross-laboratory study on microbial fuel cells (MFC) which involved different institutions around the world is presented. The study aims to assess the development of autochthone microbial pools enriched from domestic wastewater, cultivated in identical single-chamber MFCs, operated in the same way, thereby approaching the idea of developing common standards for MFCs. The MFCs are inoculated with domestic wastewater in different geographic locations. The acclimation stage and, consequently, the startup time are longer or shorter depending on the inoculum, but all MFCs reach similar maximum power outputs (55±22 μW cm-2 ) and COD removal efficiencies (87±9 %), despite the diversity of the bacterial communities. It is inferred that the MFC performance starts when the syntrophic interaction of fermentative and electrogenic bacteria stabilizes under anaerobic conditions at the anode. The generated power is mostly limited by electrolytic conductivity, electrode overpotentials, and an unbalanced external resistance. The enriched microbial consortia, although composed of different bacterial groups, share similar functions both on the anode and the cathode of the different MFCs, resulting in similar electrochemical output.

Generation of electrical energy in a microbial fuel cell coupling acetate oxidation to Fe3+ reduction and isolation of the involved bacteria

An iron reducing enrichment was obtained from sulfate reducing sludge and was evaluated on the capability of reducing Fe³⁺ coupled to acetate oxidation in a microbial fuel cell (MFC). Three molar ratios for acetate/Fe³⁺ were evaluated (2/16, 3.4/27 and 6.9/55 mM). The percentages of Fe³⁺ reduction were in a range of 80-90, 60-70 and 40-50% for the MFCs at closed circuit for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Acetate consumption was in a range of 80-90% in all cases. The results obtained at closed circuit for current density were: 11.37 mA/m², 4.5 mA/m² and 7.37 mA/m² for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Some microorganisms that were isolated and identified in the MFCs were Azospira oryzae, Cupriavidus metallidurans CH34, Enterobacter bugandensis 247BMC, Citrobacter freundii ATCC8090 and Citrobacter murliniae CDC2970-59, these bacteria have been reported as exoelectrogens in MFC and in MFC involving metals removal but not all of them have been reported to utilize acetate as preferred substrate. The results demonstrate that the isolates can utilize acetate as the sole source of carbon and suggest that Fe³⁺ reduction was carried out by a combination of different mechanisms (direct contact and redox mediators) utilized by the bacteria identified in the MFC. Storage of the energy generated from the 2/16 mM MFC system arranged in a series of three demonstrated that it is possible to utilize the energy to charge a battery.

Characterization of a new electrochemically active bacterium phylogenetically related to Alicyclobacillus hesperidum and its electrochemical performance in microbial fuel cell

Extremophilic microorganisms in microbial electrochemical systems have opened new possibilities for waste treatment. Here, a phenomenon of electricity generation under acidophilic condition was found in organic acid fermentation wastewater treatment using microbial fuel cell (MFC). The anodic microbial community analysis showed that the percentage of Firmicutes was 99.03%, which accounted for the vast majority of the microbial community at the late discharge stage with pH 3.0. As the dominant bacterium of Firmicutes, Alicyclobacillus hesperidum EG was isolated and identified. MFC experiments confirmed that Alicyclobacillus hesperidum EG exhibited good electricity generating capability with a maximum power density of 188.1 mW m^-2 at 50 °C and low pH. It is the first time that Alicyclobacillus hesperidum EG was discovered as a newly electrochemically active bacterium. Additionally, the morphological analysis combined with electrochemical experiments demonstrated that no nanowires were found in the anodic biofilm of Alicyclobacillus hesperidum EG, and Alicyclobacillus hesperidum EG may produce soluble redox-active small molecules as electron shuttles to facilitate extracellular electron transfer. Based on unique characteristics such as good acid resistance, high temperature resistance, and high electricity generation ability, Alicyclobacillus hesperidum EG exhibited great potential in wastewater treatment and energy recovery.

Treatment of mixed dairy and dye wastewater in anode of microbial fuel cell with simultaneous electricity generation

Microbial fuel cell (MFC) is a green technology that converts the stored chemical energy of organic matter to electricity; therefore, it can be used for wastewater purification and energy production simultaneously. In this study, three kinds of dairy products, including milk, cheese water, and yogurt water, were mixed with Acid orange 7 (AO7) as the model wastewater and used as the anolyte of an MFC. The capability of the system in energy production and dye removal was also investigated. The FESEM images were used to investigate the biofilms attachment to the anodes. Moreover, the polarization curves, electrochemical impedance spectroscopy, cyclic voltammetry (CV), voltage-time profiles, and coulombic efficiency were used to evaluate the electrochemical activity of the MFCs. Based on the CV results, the biofilm formation significantly improved the electrochemical activity of the electrodes. Maximum power density, voltage, and coulombic efficiency were obtained as 44.05 mW.m^-2, 332.4 mV, and 1.76%, respectively, for cheese water + AO7 anolyte, but the milk + AO7 MFC produced a stable voltage for a long time and its performance was similar to the cheese water + AO7 anolyte. Maximum COD removal and decolorization efficiencies were obtained equal to 84.57 and 92.18% for yogurt water + AO7 and cheese water + AO7 anolytes, respectively.

Improving the power generation performances of Gram-positive electricigens by regulating the peptidoglycan layer with lysozyme

The power generation performance of a microbial fuel cell (MFC) greatly depends on the relative amount of electricigens in the anodic microbial community. Running the MFC multiple times can practically enrich the electricigens, and thus improve its power generation efficiency. However, Gram-positive electricigens cannot be enriched well because of their thick non-conductive peptidoglycan layer. Herein, we report a new Gram-positive electricigen enrichment method by regulating the peptidoglycan layer of the bacteria using lysozyme. Lysozyme can partially hydrolyze the peptidoglycans layer of Gram-positive Firmicutes to improve the permeability of cell wall, and thus enhance its electricity generation activity. The stimulation of Gram-positive electricigen endows MFCs a high power generation community structure, which results in the power density 42% higher than that of the control sample. Our work has provided a new and simple method for optimizing the anode community structure by regulating weak electricigens in the community with lysozyme.

Differences in Applied Redox Potential on Cathodes Enrich for Diverse Electrochemically Active Microbial Isolates From a Marine Sediment

The diversity of microbially mediated redox processes that occur in marine sediments is likely underestimated, especially with respect to the metabolisms that involve solid substrate electron donors or acceptors. Though electrochemical studies that utilize poised potential electrodes as a surrogate for solid substrate or mineral interactions have shed some much needed light on these areas, these studies have traditionally been limited to one redox potential or metabolic condition. This work seeks to uncover the diversity of microbes capable of accepting cathodic electrons from a marine sediment utilizing a range of redox potentials, by coupling electrochemical enrichment approaches to microbial cultivation and isolation techniques. Five lab-scale three-electrode electrochemical systems were constructed, using electrodes that were initially incubated in marine sediment at cathodic or electron-donating voltages (five redox potentials between -400 and -750 mV versus Ag/AgCl) as energy sources for enrichment. Electron uptake was monitored in the laboratory bioreactors and linked to the reduction of supplied terminal electron acceptors (nitrate or sulfate). Enriched communities exhibited differences in community structure dependent on poised redox potential and terminal electron acceptor used. Further cultivation of microbes was conducted using media with reduced iron (Fe0, FeCl2) and sulfur (S0) compounds as electron donors, resulting in the isolation of six electrochemically active strains. The isolates belong to the genera Vallitalea of the Clostridia, Arcobacter of the Epsilonproteobacteria, Desulfovibrio of the Deltaproteobacteria, and Vibrio and Marinobacter of the Gammaproteobacteria. Electrochemical characterization of the isolates with cyclic voltammetry yielded a wide range of midpoint potentials (99.20 to -389.1 mV versus Ag/AgCl), indicating diverse metabolic pathways likely support the observed electron uptake. Our work demonstrates culturing under various electrochemical and geochemical regimes allows for enhanced cultivation of diverse cathode-oxidizing microbes from one environmental system. Understanding the mechanisms of solid substrate oxidation from environmental microbes will further elucidation of the ecological relevance of these electron transfer interactions with implications for microbe-electrode technologies.

Enhanced Anaerobic Biodegradation of Benzoate Under Sulfate-Reducing Conditions With Conductive Iron-Oxides in Sediment of Pearl River Estuary

Anaerobic biodegradation of aromatic compounds under sulfate-reducing conditions is important to marine sediments. Sulfate respiration by a single bacterial strain and syntrophic metabolism by a syntrophic bacterial consortium are primary strategies for sulfate-dependent biodegradation of aromatic compounds. The objective of this study was to investigate the potential of conductive iron oxides to facilitate the degradation of aromatic compounds under sulfate-reducing conditions in marine sediments, using benzoate as a model aromatic compound. Here, in anaerobic incubations of sediments from the Pearl River Estuary, the addition of hematite or magnetite (20 mM as Fe atom) enhanced the rates of sulfate-dependent benzoate degradation by 81.8 and 91.5%, respectively, compared with control incubations without iron oxides. Further experiments demonstrated that the rate of sulfate-dependent benzoate degradation accelerated with increased magnetite concentration (5, 10, and 20 mM). The detection of acetate as an intermediate product implied syntrophic benzoate degradation pathway, which was also supported by the abundance of putative acetate- or/and H₂-utilizing sulfate reducers from microbial community analysis. Microbial reduction of iron oxides under sulfate-reducing conditions only accounted for 2–11% of electrons produced by benzoate oxidation, thus the stimulatory effect of conductive iron oxides on sulfate-dependent benzoate degradation was not mainly due to an increased pool of terminal electron acceptors. The enhanced rates of syntrophic benzoate degradation by the presence of conductive iron oxides probably resulted from the establishment of a direct interspecies electron transfer (DIET) between syntrophic partners. In the presence of magnetite, Bacteroidetes and Desulfobulbaceae with potential function of extracellular electron transfer might be involved in syntrophic benzoate degradation. Results from this study will contribute to the development of new strategies for in situ bioremediation of anaerobic sediments contaminated with aromatic compounds, and provide a new perspective for the natural attenuation of aromatic compounds in iron-rich marine sediments.

Monitoring microbial communities' dynamics during the start-up of microbial fuel cells by high-throughput screening techniques

Microbial Electrochemical Technologies are based on the use of electrochemically active microorganisms that can carry out extracellular electron transfer to an electrode while they are oxidizing the organic compounds. The dynamics and changes of the bacterial community in the anode biofilm and planktonic broth of an acetate fed batch single chamber air cathode MFC have been studied by combing flow-cytometry and Illumina sequencing techniques. At the beginning of the test, from 0 h to 70 h, microbial planktonic communities changed from four groups to two groups, as revealed by DNA content, and from three groups to one group based on the cell membrane polarization revealed by a DiOC₆(3) probe. Between 4^th day and 13^th day, microbial communities changed from one group to a maximum of three groups, monitoring DNA content, and from one group to two based on the cell membrane polarization. The 16S rDNA gene profiling confirmed the shift in microbial communities, with Acinetobacter (39.34%), Azospirillum (27.66%), Arcobacter (4.17%) and Comamonas (2.62%) being the most abundant genera at the beginning of MFC activation. After 70 h the main genera detected were Azospirillum (46.42%), Acinetobacter (34.66%), Enterococcus (2.32%), Dysgonomonas (2.14%). Data obtained have shown that flow cytometry and illumina sequencing are useful tools to monitor "online" the changes in microbial communities during the MFCs start-up and the increase of Azospirillum and Acinetobacter genera is in good agreement with the MFC voltage generation. Moreover, monitoring planktonic populations, instead of the less accessible anode biofilm, was in good agreement with the evolution of MFC voltage.

Bioelectricity generation using microalgal biomass as electron donor in a bio-anode microbial fuel cell

In this study, microalgal biomass waste (Chlorella regularis) was treated while simultaneously producing bioelectricity in a microbial fuel cell (MFC). Algal biomass was the sole electron donor and was enriched with easily biodegradable proteins (46%) and carbohydrates (22%). The generated power density was 0.86 W/m² and the columbic efficiency reached ∼61.5%.The power generation could be further increased to 1.07 W/m² by using a biomass waste concentration enhancement strategy with maximum chemical oxygen demand (COD) removal of ∼65.2%. Via direct comparison, the power generation and COD removal capability of the algal-fed MFC was close to that of the commercial acetate-fed MFC. The algae-fed MFC presented superior electrochemical characteristics that were attributed to the complicated composition of the biomass anolyte. It possessed a multiple anode respiring bacterial group and diverse microbial community. Hence, this study provides a new strategy for the utilization of microalgal biomass as a bioresource.

Bioelectricity production from wood hydrothermal-treatment wastewater: Enhanced power generation in MFC-fed mixed wastewaters

Electrogenic microorganisms are the heart of microbial fuel cell (MFC) systems that enable the conversion of waste into bioelectricity. Bacteria able to generate current, found in various natural and anthropogenic environments, need simple substrates such as acetate or glucose. Complex substrates are utilized by bacterial consortia made up of strains that exhibit a wide range of enzymatic and metabolic activity that determines the type of substrate they are able to degrade. The characteristics of the environment that a bacterial consortium develops in strongly affect the consortium's species composition and electrogenic potential. This study presents the first attempt to use industrial raw wastewater from the hydrothermal treatment of wood (WHTW) as a substrate and a source of bacterial consortia for MFC, so that such wastewater could simultaneously be treated and produce bioelectricity. The power generated in MFCs fed with WHTW was enhanced remarkably from 70 to 360mW/m² when municipal wastewater was introduced into the reactor. An analysis of the bacterial composition of these two types of wastewater revealed that the WHTW was dominated by the genera Thermoanaerobacterium and Paenibacillus while in the biofilm developed in the anode the main genera were Hydrogenophilus and Anaerobaculum. It has been shown for the first time that highly polluted wood industry wastewater may be effectively treated in MFC systems and the use of appropriate bacterial consortium may result in enhancing power generation accompanying wastewater treatment.

In situ Biofilm Quantification in Bioelectrochemical Systems by using Optical Coherence Tomography

Detailed studies of microbial growth in bioelectrochemical systems (BESs) are required for their suitable design and operation. Here, we report the use of optical coherence tomography (OCT) as a tool for in situ and noninvasive quantification of biofilm growth on electrodes (bioanodes). An experimental platform is designed and described in which transparent electrodes are used to allow real-time, 3D biofilm imaging. The accuracy and precision of the developed method is assessed by relating the OCT results to well-established standards for biofilm quantification (chemical oxygen demand (COD) and total N content) and show high correspondence to these standards. Biofilm thickness observed by OCT ranged between 3 and 90 μm for experimental durations ranging from 1 to 24 days. This translated to growth yields between 38 and 42 mgCODbiomass  gCODacetate -1 at an anode potential of -0.35 V versus Ag/AgCl. Time-lapse observations of an experimental run performed in duplicate show high reproducibility in obtained microbial growth yield by the developed method. As such, we identify OCT as a powerful tool for conducting in-depth characterizations of microbial growth dynamics in BESs. Additionally, the presented platform allows concomitant application of this method with various optical and electrochemical techniques.

Effects of wastewater constituents and operational conditions on the composition and dynamics of anodic microbial communities in bioelectrochemical systems

Over the last decade, there has been an ever-growing interest in bioelectrochemical systems (BES) as a sustainable technology enabling simultaneous wastewater treatment and biological production of, e.g. electricity, hydrogen, and further commodities. A key component of any BES degrading organic matter is the anode where electric current is biologically generated from the oxidation of organic compounds. The performance of BES depends on the interactions of the anodic microbial communities. To optimize the operational parameters and process design of BES a better comprehension of the microbial community dynamics and interactions at the anode is required. This paper reviews the abundance of different microorganisms in anodic biofilms and discusses their roles and possible side reactions with respect to their implications on the performance of BES utilizing wastewaters. The most important operational parameters affecting anodic microbial communities grown with wastewaters are highlighted and guidelines for controlling the composition of microbial communities are given.

Treatment of soak liquor and bioelectricity generation in dual chamber microbial fuel cell

The discharge of untreated soak liquor from tannery industry causes severe environmental pollution. This study is characterizing the soak liquor as a substrate in the microbial fuel cell (MFC) for remediation along with electricity generation. The dual chamber MFC was constructed and operated. Potassium permanganate was used as cathode solution and carbon felt electrode as anodic and cathodic material, respectively. The soak liquor was characterized by electrochemical studies viz., cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and polarization studies, respectively. The removal percentage of protein, lipid, and chemical oxygen demand (COD) were measured before and after treatment with MFC. The results of MFC showed a highest current density of 300 mA/cm² and a power density of 92 mW/m². The removal of COD, protein, and lipid were noted as 96, 81, and 97% respectively during MFC process. This MFC can be used in tannery industries for treating soak liquor and simultaneous electricity generation.

Bio-electrochemical reactors using AMI-7001S and CMI-7000S membranes as separators for silver recovery and power generation

Bioelectrochemical reactors using AMI-7001S and CMI-7000S membranes were investigated for silver recovery and power generation. High silver removal (83.73-92.50%) and columbic efficiency (11.50-19.89%) were obtained in CMI-based reactor after 24h, although, some diffusion of Ag⁺ ions was observed. In contrast, substrate loss was found in AMI-based reactor, which caused low overall performance. At an initial Ag⁺ concentration 2000mg/L, a maximum power density of 5396mW/m³ and 3385mW/m³ were obtained in CMI and AMI-based reactor, respectively. Under SEM analysis, different morphologies of metallic silver deposits were detected on the cathode surfaces, and was confirmed by EDX and XRD technique. High diversity of anodic microbial communities were also found, in which Firmulates, Proteobacteria, and Bateroidetes were dominant phyla. Geobacter sp. and other exoelectrogens could be detected while no Shewanella-like sequences were retrieved. The study suggests that CMI-7000S showed better performance when compared to AMI-7001S at the same operational conditions.

A comprehensive overview on electro-active biofilms, role of exo-electrogens and their microbial niches in microbial fuel cells (MFCs)

Microbial fuel cells (MFCs) are biocatalyzed systems which can drive electrical energy by directly converting chemical energy using microbial biocatalyst and are considered as one of the important propitious technologies for sustainable energy production. Much research on MFCs experiments is under way with great potential to become an alternative to produce clean energy from renewable waste. MFCs have been one of the most promising technologies for generating clean energy industry in the future. This article summarizes the important findings in electro-active biofilm formation and the role of exo-electrogens in electron transfer in MFCs. This study provides and brings special attention on the effects of various operating and biological parameters on the biofilm formation in MFCs. In addition, it also highlights the significance of different molecular techniques used in the microbial community analysis of electro-active biofilm. It reviews the challenges as well as the emerging opportunities required to develop MFCs at commercial level, electro-active biofilms and to understand potential application of microbiological niches are also depicted. Thus, this review is believed to widen the efforts towards the development of electro-active biofilm and will provide the research directions to overcome energy and environmental challenges.

Unravelling the active microbial community in a thermophilic anaerobic digester-microbial electrolysis cell coupled system under different conditions

Thermophilic anaerobic digestion (AD) of pig slurry coupled to a microbial electrolysis cell (MEC) with a recirculation loop was studied at lab-scale as a strategy to increase AD stability when submitted to organic and nitrogen overloads. The system performance was studied, with the recirculation loop both connected and disconnected, in terms of AD methane production, chemical oxygen demand removal (COD) and volatile fatty acid (VFA) concentrations. Furthermore, the microbial population was quantitatively and qualitatively assessed through DNA and RNA-based qPCR and high throughput sequencing (MiSeq), respectively to identify the RNA-based active microbial populations from the total DNA-based microbial community composition both in the AD and MEC reactors under different operational conditions. Suppression of the recirculation loop reduced the AD COD removal efficiency (from 40% to 22%) and the methane production (from 0.32 to 0.03 m³ m^-3 d^-1). Restoring the recirculation loop led to a methane production of 0.55 m³ m^-3 d^-1 concomitant with maximum MEC COD and ammonium removal efficiencies of 29% and 34%, respectively. Regarding microbial analysis, the composition of the AD and MEC anode populations differed from really active microorganisms. Desulfuromonadaceae was revealed as the most active family in the MEC (18%-19% of the RNA relative abundance), while hydrogenotrophic methanogens (Methanobacteriaceae) dominated the AD biomass.

Integrating microbial fuel cells with anaerobic acidification and forward osmosis membrane for enhancing bio-electricity and water recovery from low-strength wastewater

Microbial fuel cells (MFCs) and forward osmosis (FO) are two emerging technologies with great potential for energy-efficient wastewater treatment. In this study, anaerobic acidification and FO membrane were simultaneously integrated into an air-cathode MFC (AAFO-MFC) for enhancing bio-electricity and water recovery from low-strength wastewater. During a long-term operation of approximately 40 days, the AAFO-MFC system achieved a continuous and relatively stable power generation, and the maximum power density reached 4.38 W/m³. The higher bio-electricity production in the AAFO-MFC system was mainly due to the accumulation of ethanol resulted from anaerobic acidification process and the rejection of FO membrane. In addition, a proper salinity environment in the system controlled by the addition of MF membrane enhanced the electricity production. Furthermore, the AAFO-MFC system produced a high quality effluent, with the removal rates of organic matters and total phosphorus of more than 97%. However, the nitrogen removal was limited for the lower rejection of FO membrane. The combined biofouling and inorganic fouling were responsible for the lower water flux of FO membrane, and the Desulfuromonas sp. utilized the ethanol for bio-electricity production was observed in the anode. These results substantially improve the prospects for simultaneous wastewater treatment and energy recovery, and further studies are needed to optimize the system integration and operating parameters.

A critical review of bioelectrochemical membrane reactor (BECMR) as cutting-edge sustainable wastewater treatment

Reclamation of wastewater along with minimum energy utilization has been the paramount concern today. Tremendous industrialization and corresponding demographic resulted in elevated water and energy demand; however, scarcity of sufficient water and energy resource triggers rigorous research for sustainable water treatment technology. Recent technologies like activated sludge, filtration, adsorption, coagulation, and oxidation have been considered as promising sustainable technologies, but high cost, low efficiency, and efficacy are the major concerns so far. Wastewater is food for billions of bacteria, where some exceptional bacterial species have the ability to transport electrons that are produced during metabolism to outside the cell membrane. Indeed, wastewater can itself be considered as a prominent candidate to resolve the problem of sustainability. Bioelectrochemical membrane reactor is a promising technology, which is an integration of microbial fuel cell (MFC) to membrane bioreactor (MBR). It promises the benefit of harvesting electricity while biologically treating any type of wastewater to the highest extent while passing wastewater through anaerobic, aerobic, and integrated membrane compartments in successive manner. In this review, we provide critical rethinking to take this idea of integration of MFC-MBR and apply them to produce a fully functional prototype of bioelectrochemical membrane reactor that could be used commercially.

In situ monitoring of Shewanella oneidensis MR-1 biofilm growth on gold electrodes by using a Pt microelectrode

Much attention has been focused on electrochemically active bacteria (EAB) in the application of bioelectrochemical systems (BESs). Studying the EAB biofilm growth mechanism as well as electron transfer mechanism provides a route to upgrade BES performance. But an effective bacterial growth monitoring method on the biofilm scale is still absent in this field. In this work, electrode-attached bacterial biofilms formed by Shewanella oneidensis MR-1 were dynamically monitored through a microelectrode method. For S. oneidensis MR-1, a respiratory electron transport chain is associated with the secretion of riboflavin, severing as the cofactor to the outer membrane c-type cytochromes. The biofilm growth was monitored through adopting riboflavin as an electrochemical probe during the approach of the microelectrode to the biofilm external surface. This method allows in vivo and in situ biofilm monitoring at different growth stages without destructive manipulation. Furthermore, the biofilm growth monitoring results have been proved to be relatively accurate through observation under confocal laser scanning microscopy. We further applied this method to investigate the effects of four environmental factors (the concentrations of dissolved oxygen, sodium lactate, riboflavin as well as the electrode potential) on S. oneidensis MR-1 biofilm development.

Enhanced removal of petroleum hydrocarbons using a bioelectrochemical remediation system with pre-cultured anodes

Bioelectrochemical remediation (BER) systems such as microbial fuel cells (MFCs) have recently emerged as a green technology for the effective remediation of petroleum hydrocarbon contaminants (PH) coupled with simultaneous energy recovery. Recent research has shown that biofilms previously enriched for substrate degrading bacteria resulted in excellent performance in terms of substrate removal and electricity generation but the effects on hydrocarbon contaminant degradation were not examined. Here we investigate the differences between enriched biofilm anodes and freshly inoculated new anodes in diesel fed single chamber mediatorless microbial fuel cells (DMFC) using various techniques for the enhancement of PH contaminant remediation with concomitant electricity generation. An anodophilic microbial consortium previously selected for over a year through continuous culturing with a diesel concentration of about 800mgl(-1) and which now showed complete removal of this concentration of diesel within 30days was compared to that of a freshly inoculated new anode MFC (showing 83.4% removal of diesel) with a simultaneous power generation of 90.81mW/m(2) and 15.04mW/m(2) respectively. The behaviour of pre-cultured anodes at a higher concentration of PH (8000mgl(-1)) was also investigated. Scanning electron microscopy observation revealed a thick biofilm covering the pre-cultured anodic electrode but not the anode from the freshly inoculated MFC. High resolution imaging showed the presence of thin 60nm diametre pilus-like projections emanating from the cells. Anodic microbial community profiling confirmed that the selection for diesel degrading exoelectrogenic bacteria had occurred. Identification of a biodegradative gene (alkB) provided strong evidence of the catabolic pathway used for diesel degradation in the DMFCs.

Investigating microbial activities of electrode-associated microorganisms in real-time

Electrode-associated microbial biofilms are essential to the function of bioelectrochemical systems (BESs). These systems exist in a number of different configurations but all rely on electroactive microorganisms utilizing an electrode as either an electron acceptor or an electron donor to catalyze biological processes. Investigations of the structure and function of electrode-associated biofilms are critical to further the understanding of how microbial communities are able to reduce and oxidize electrodes. The community structure of electrode-reducing biofilms is diverse and often dominated by Geobacter spp. whereas electrode-oxidizing biofilms are often dominated by other microorganisms. The application of a wide range of tools, such as high-throughput sequencing and metagenomic data analyses, provide insight into the structure and possible function of microbial communities on electrode surfaces. However, the development and application of techniques that monitor gene expression profiles in real-time are required for a more definite spatial and temporal understanding of the diversity and biological activities of these dynamic communities. This mini review summarizes the key gene expression techniques used in BESs research, which have led to a better understanding of population dynamics, cell–cell communication and molecule-surface interactions in mixed and pure BES communities.

Electricity-driven metabolic shift through direct electron uptake by electroactive heterotroph Clostridium pasteurianum

Although microbes directly accepting electrons from a cathode have been applied for CO₂ reduction to produce multicarbon-compounds, a high electron demand and low product concentration are critical limitations. Alternatively, the utilization of electrons as a co-reducing power during fermentation has been attempted, but there must be exogenous mediators due to the lack of an electroactive heterotroph. Here, we show that Clostridium pasteurianum DSM 525 simultaneously utilizes both cathode and substrate as electron donors through direct electron transfer. In a cathode compartment poised at +0.045 V vs. SHE, a metabolic shift in C. pasteurianum occurs toward NADH-consuming metabolite production such as butanol from glucose (20% shift in terms of NADH consumption) and 1,3-propandiol from glycerol (21% shift in terms of NADH consumption). Notably, a small amount of electron uptake significantly induces NADH-consuming pathways over the stoichiometric contribution of the electrons as reducing equivalents. Our results demonstrate a previously unknown electroactivity and metabolic shift in the biochemical-producing heterotroph, opening up the possibility of efficient and enhanced production of electron-dense metabolites using electricity.

Methods for understanding microbial community structures and functions in microbial fuel cells: a review

Microbial fuel cells (MFCs) employ microorganisms to recover electric energy from organic matter. However, fundamental knowledge of electrochemically active bacteria is still required to maximize MFCs power output for practical applications. This review presents microbiological and electrochemical techniques to help researchers choose the appropriate methods for the MFCs study. Pre-genomic and genomic techniques such as 16S rRNA based phylogeny and metagenomics have provided important information in the structure and genetic potential of electrode-colonizing microbial communities. Post-genomic techniques such as metatranscriptomics allow functional characterizations of electrode biofilm communities by quantifying gene expression levels. Isotope-assisted phylogenetic analysis can further link taxonomic information to microbial metabolisms. A combination of electrochemical, phylogenetic, metagenomic, and post-metagenomic techniques offers opportunities to a better understanding of the extracellular electron transfer process, which in turn can lead to process optimization for power output.

Microbial community structures differentiated in a single-chamber air-cathode microbial fuel cell fueled with rice straw hydrolysate

BACKGROUND

The microbial fuel cell represents a novel technology to simultaneously generate electric power and treat wastewater. Both pure organic matter and real wastewater can be used as fuel to generate electric power and the substrate type can influence the microbial community structure. In the present study, rice straw, an important feedstock source in the world, was used as fuel after pretreatment with diluted acid method for a microbial fuel cell to obtain electric power. Moreover, the microbial community structures of anodic and cathodic biofilm and planktonic culturewere analyzed and compared to reveal the effect of niche on microbial community structure.

RESULTS

The microbial fuel cell produced a maximum power density of 137.6 ± 15.5 mW/m2 at a COD concentration of 400 mg/L, which was further increased to 293.33 ± 7.89 mW/m2 through adjusting the electrolyte conductivity from 5.6 mS/cm to 17 mS/cm. Microbial community analysis showed reduction of the microbial diversities of the anodic biofilm and planktonic culture, whereas diversity of the cathodic biofilm was increased. Planktonic microbial communities were clustered closer to the anodic microbial communities compared to the cathodic biofilm. The differentiation in microbial community structure of the samples was caused by minor portion of the genus. The three samples shared the same predominant phylum of Proteobacteria. The abundance of exoelectrogenic genus was increased with Desulfobulbus as the shared most abundant genus; while the most abundant exoelectrogenic genus of Clostridium in the inoculum was reduced. Sulfate reducing bacteria accounted for large relative abundance in all the samples, whereas the relative abundance varied in different samples.

CONCLUSION

The results demonstrated that rice straw hydrolysate can be used as fuel for microbial fuel cells; microbial community structure differentiated depending on niches after microbial fuel cell operation; exoelectrogens were enriched; sulfate from rice straw hydrolysate might be responsible for the large relative abundance of sulfate reducing bacteria.

Usage of Ti-TiO2 Electrode in Microbial Fuel Cell to Enhance the Electricity Generation and its Biocompatibility

Microbial fuel cell (MFC) provides the generation of electricity as bacteria on anode electrode oxidize organic content present in wastewater. This study presents simultaneously the electricity generation from two different synthetic wastewater mixtures using a new electrode in both anode and cathode compartments. Results showed that power output increased excessively in the case of Ti-TiO2 electrode. MFC reactors were mainly dominated by Geobacter, Shewanella, Pseudomonas and Clostridium species. The molecular results also demonstrated that Ti-TiO2 electrode is biocompatibility and able to be used in MFC because these species are electricity producing bacteria.

Alteration of bacterial communities and organic matter in microbial fuel cells (MFCs) supplied with soil and organic fertilizer

The alteration of the organic matter (OM) and the composition of bacterial community in microbial fuel cells (MFCs) supplied with soil (S) and a composted organic fertilizer (A) was examined at the beginning and at the end of 3 weeks of incubation under current-producing as well as no-current-producing conditions. Denaturing gradient gel electrophoresis revealed a significant alteration of the microbial community structure in MFCs generating electricity as compared with no-current-producing MFCs. The genetic diversity of cultivable bacterial communities was assessed by random amplified polymorphic DNA (RAPD) analysis of 106 bacterial isolates obtained by using both generic and elective media. Sequencing of the 16S rRNA genes of the more representative RAPD groups indicated that over 50.4% of the isolates from MFCs fed with S were Proteobacteria, 25.1% Firmicutes, and 24.5% Actinobacteria, whereas in MFCs supplied with A 100% of the dominant species belonged to γ-Proteobacteria. The chemical analysis performed by fractioning the OM and using thermal analysis showed that the amount of total organic carbon contained in the soluble phase of the electrochemically active chambers significantly decreased as compared to the no-current-producing systems, whereas the OM of the solid phase became more humified and aromatic along with electricity generation, suggesting a significant stimulation of a humification process of the OM. These findings demonstrated that electroactive bacteria are commonly present in aerobic organic substrates such as soil or a fertilizer and that MFCs could represent a powerful tool for exploring the mineralization and humification processes of the soil OM.

Control of power sourced from a microbial fuel cell reduces its start-up time and increases bioelectrochemical activity

Microbial fuel cell (MFC) performance depends on the selective development of an electrogenic biofilm at an electrode. Controlled biofilm enrichment may reduce start-up time and improve subsequent power performance. The anode potential is known to affect start-up and subsequent performance in electrogenic bio-catalytic consortia. Control strategies varying electrical load through gradient based maximum power point tracking (MPPT) and transient poised anode potential followed by MPPT are compared to static ohmic loading. Three replicate H-type MFCs were used to investigate start-up strategies: (1) application of an MPPT algorithm preceded by poised-potential at the anode (+0.645 V vs Ag/AgCl); (2) MFC connected to MPPT-only; (3) static external load of 1 kΩ and 500 Ω. Active control showed a significant reduction in start-up time from 42 to 22 days, along with 3.5-fold increase in biocatalytic activity after start-up. Such active control may improve applicability by accelerating start-up and enhancing MFC power and bio-catalytic performance.