Establishment and inactivation of mono-species biofilm in a semipilot-scale water distribution system using nanocomposite of silver nanoparticles/montmorillonite loaded cationic chitosan

This study presents a novel approach in the synthesis and characterization of nanocomposites comprising cationic chitosan (CCS) blended with varying concentrations of silver nanoparticles/montmorillonite (AgNPs/MMT). AgNPs/MMT was synthesized using soluble starch as a reducing and stabilizing agent. Subsequently, nanocomposites, namely CCS/AgMMT-0, CCS/AgMMT-0.5, CCS/AgMMT-1.5, and CCS/AgMMT-2.5, were developed by blending 2.5 g of CCS with 0, 0.5, 1.5, and 2.5 g of AgNPs/MMT, respectively, and the corresponding nanocomposites were prepared using ball milling technique. Transmission electron microscopy (TEM) analysis revealed the formation of nanocomposites that exhibiting nearly spherical morphologies. Dynamic light scattering (DLS) measurements displayed average particle sizes of 1183 nm, 131 nm, 140 nm, and 188 nm for CCS/AgMMT-0, CCS/AgMMT-0.5, CCS/AgMMT-1.5, and CCS/AgMMT-2.5, respectively. The narrow polydispersity index (~0.5) indicated uniform particle size distributions across the nanocomposites, affirming monodispersity. Moreover, the zeta potential values exceeding 30 mV across all nanocomposites that confirmed their stability against agglomeration. Notably, CCS/AgMMT-2.5 nanocomposite exhibited potent antibacterial and antibiofilm properties against diverse pipeline materials. Findings showed that after 15 days of incubation, the highest populations of biofilm cells, Pseudomonas aeruginosa biofilm, developed over UPVC, MDPE, DCI, and SS, with corresponding HPCs of 4.79, 6.38, 8.81, and 7.24 CFU/cm2. The highest cell densities of Enterococcus faecalis biofilm in the identical situation were 4.19, 5.89, 8.12, and 6.9 CFU/cm2. The nanocomposite CCS/AgMMT-2.5 exhibited the largest measured zone of inhibition (ZOI) against both P. aeruginosa and E. faecalis, with measured ZOI values of 19 ± 0.65 and 17 ± 0.21 mm, respectively. Remarkably, the research indicates that the youngest biofilm exhibited the most notable rate of inactivation when exposed to a dose of 150 mg/L, in comparison to the mature biofilm. These such informative findings could offer valuable insights into the development of effective antibiofilm agents and materials applicable in diverse sectors such as water treatment facilities, medical devices, and industrial pipelines.

Clinical antibiotic-resistance plasmids have small effects on biofilm formation and population growth in Escherichia coli in vitro

Antimicrobial resistance (AR) mechanisms encoded on plasmids can affect other phenotypic traits in bacteria, including biofilm formation. These effects may be important contributors to the spread of AR and the evolutionary success of plasmids, but it is not yet clear how common such effects are for clinical plasmids/bacteria, and how they vary among different plasmids and host strains. Here, we used a combinatorial approach to test the effects of clinical AR plasmids on biofilm formation and population growth in clinical and laboratory Escherichia coli strains. In most of the 25 plasmid-bacterium combinations tested, we observed no significant change in biofilm formation upon plasmid introduction, contrary to the notion that plasmids frequently alter biofilm formation. In a few cases we detected altered biofilm formation, and these effects were specific to particular plasmid-bacterium combinations. By contrast, we found a relatively strong effect of a chromosomal streptomycin-resistance mutation (in rpsL) on biofilm formation. Further supporting weak and host-strain-dependent effects of clinical plasmids on bacterial phenotypes in the combinations we tested, we found growth costs associated with plasmid carriage (measured in the absence of antibiotics) were moderate and varied among bacterial strains. These findings suggest some key clinical resistance plasmids cause only mild phenotypic disruption to their host bacteria, which may contribute to the persistence of plasmids in the absence of antibiotics.

Strategies for Enhancing Microbial Production of 2'-Fucosyllactose, the Most Abundant Human Milk Oligosaccharide

Human milk oligosaccharides (HMOs), a group of structurally diverse unconjugated glycans in breast milk, act as important prebiotics and have plenty of unique health effects for growing infants. 2'-Fucosyllactose (2'-FL) is the most abundant HMO, accounting for approximately 30%, among approximately 200 identified HMOs with different structures. 2'-FL can be enzymatically produced by α1,2-fucosyltransferase, using GDP-l-fucose as donor and lactose as acceptor. Metabolic engineering strategies have been widely used for enhancement of GDP-l-fucose supply and microbial production of 2'-FL with high productivity. GDP-l-fucose supply can be enhanced by two main pathways, including de novo and salvage pathways. 2'-FL-producing α1,2-fucosyltransferases have widely been identified from various microorganisms. Metabolic pathways for 2'-FL synthesis can be basically constructed by enhancing GDP-l-fucose supply and introducing α1,2-fucosyltransferase. Various strategies have been attempted to enhance 2'-FL production, such as acceptor enhancement, donor enhancement, and improvement of the functional expression of α1,2-fucosyltransferase. In this review, current progress in GDP-l-fucose synthesis and bacterial α1,2-fucosyltransferases is described in detail, various metabolic engineering strategies for enhancing 2'-FL production are comprehensively reviewed, and future research focuses in biotechnological production of 2'-FL are suggested.

Biofilm through the Looking Glass: A Microbial Food Safety Perspective

Food-processing facilities harbor a wide diversity of microorganisms that persist and interact in multispecies biofilms, which could provide an ecological niche for pathogens to better colonize and gain tolerance against sanitization. Biofilm formation by foodborne pathogens is a serious threat to food safety and public health. Biofilms are formed in an environment through synergistic interactions within the microbial community through mutual adaptive response to their long-term coexistence. Mixed-species biofilms are more tolerant to sanitizers than single-species biofilms or their planktonic equivalents. Hence, there is a need to explore how multispecies biofilms help in protecting the foodborne pathogen from common sanitizers and disseminate biofilm cells from hotspots and contaminate food products. This knowledge will help in designing microbial interventions to mitigate foodborne pathogens in the processing environment. As the global need for safe, high-quality, and nutritious food increases, it is vital to study foodborne pathogen behavior and engineer new interventions that safeguard food from contamination with pathogens. This review focuses on the potential food safety issues associated with biofilms in the food-processing environment.

Metabolic engineering strategies of de novo pathway for enhancing 2'-fucosyllactose synthesis in Escherichia coli

2′‐Fucosyllactose (2′‐FL), one of the most abundant human milk oligosaccharides (HMOs), is used as a promising infant formula ingredient owing to its multiple health benefits for newborns. However, limited availability and high‐cost preparation have restricted its extensive use and intensive research on its potential functions. In this work, a powerful Escherichia coli cell factory was developed to ulteriorly increase 2′‐FL production. Initially, a modular pathway engineering was strengthened to balance the synthesis pathway through different plasmid combinations with a resulting maximum 2′‐FL titre of 1.45 g l⁻¹. To further facilitate the metabolic flux from GDP‐l‐fucose towards 2′‐FL, the CRISPR‐Cas9 system was utilized to inactivate the genes including lacZ and wcaJ, increasing the titre by 6.59‐fold. Notably, the co‐introduction of NADPH and GTP regeneration pathways was confirmed to be more conducive to 2′‐FL formation, achieving a 2′‐FL titre of 2.24 g l⁻¹. Moreover, comparisons of various exogenous α1,2‐fucosyltransferase candidates revealed that futC from Helicobacter pylori generated the highest titre of 2′‐FL. Finally, the viability of scaled‐up production of 2′‐FL was evidenced in a 3 l bioreactor with a maximum titre of 22.3 g l⁻¹ 2′‐FL and a yield of 0.53 mole 2′‐FL mole⁻¹ lactose.

The Influence of Nutrient Medium Composition on Escherichia coli Biofilm Development and Heterologous Protein Expression

In the present study, the effects of different nutrient media on the development of Escherichia coli biofilms and the production of a heterologous protein were examined. E. coli JM109(DE3) cells transformed with pFM23 plasmid carrying the gene for enhanced green fluorescent protein (eGFP) expression were used. Cells were grown in two different culture media, Lysogenic Broth (LB) and M9ZB, in a flow cell system for 10 days. Epifluorescence microscopy, fluorimetry, and a high-performance liquid chromatography (HPLC) method based on hydrophobic interaction chromatography (HIC) were used to assess bacterial growth, plasmid copy number (PCN), and eGFP production in both planktonic and biofilm cells. The results showed that biofilm development was favored in M9ZB medium when compared with LB. However, the number of eGFP-expressing cells was higher in LB for both planktonic and sessile states (two-fold and seven-fold, respectively). In addition, the PCN in biofilm cells was slightly higher when using LB medium (on average, 29 plasmids per cell versus 20 plasmids per cell in M9ZB), and higher plasmid stability was observed in biofilms formed in LB compared to their planktonic counterparts. Hence, E. coli biofilms grown in LB enhanced both plasmid stability and capacity to produce the model heterologous protein when compared to M9ZB.

Microfluidic cultivation and analysis of productive biofilms

We here report the application of a machine-based microfluidic biofilm cultivation and analysis platform for studying the performance of biocatalytically active biofilms. By using robotic sampling, we succeeded in spatially resolving the productivity of three microfluidic reactors containing biocatalytically active biofilms that inducibly overexpress recombinant enzymes. Escherichia coli biofilms expressing two stereoselective oxidoreductases, the (R)-selective alcohol dehydrogenase LbADH and the (S)-selective ketoreductase Gre2p, as well as the phenolic acid decarboxylase EsPAD were used. The excellent reproducibility of the cultivation and analysis methods observed for all three systems underlines the usefulness of the new technical platform for the investigation of biofilms. In addition, we demonstrated that the analytical platform also opens up new opportunities to perform in-depth spatially resolved studies on the biomass growth in a reactor channel and its biochemical productivity. Since the platform not only offers the detailed biochemical characterization but also broad capabilities for the morphological study of living biofilms, we believe that our approach can also be performed on many other natural and artificial biofilms to systematically investigate a wide range of process parameters in a highly parallel manner using miniaturized model systems, thus advancing the harnessing of microbial communities for technical purposes.

In Vitro Antimicrobial Susceptibility Testing of Biofilm-Growing Bacteria: Current and Emerging Methods

The antibiotic susceptibility of bacterial pathogens is typically determined based on planktonic cells, as recommended by several international guidelines. However, most of chronic infections - such as those established in wounds, cystic fibrosis lung, and onto indwelling devices - are associated to the formation of biofilms, communities of clustered bacteria attached onto a surface, abiotic or biotic, and embedded in an extracellular matrix produced by the bacteria and complexed with molecules from the host. Sessile microorganisms show significantly increased tolerance/resistance to antibiotics compared with planktonic counterparts. Consequently, antibiotic concentrations used in standard antimicrobial susceptibility tests, although effective against planktonic bacteria in vitro, are not predictive of the concentrations required to eradicate biofilm-related infections, thus leading to treatment failure, chronicization and removal of material in patients with indwelling medical devices.Meeting the need for the in vitro evaluation of biofilm susceptibility to antibiotics, here we reviewed several methods proposed in literature highlighting their advantages and limitations to guide scientists towards an appropriate choice.

Regulation of colony morphology and biofilm formation in Shewanella algae

Bacterial colony morphology can reflect different physiological stages such as virulence or biofilm formation. In this work we used transposon mutagenesis to identify genes that alter colony morphology and cause differential Congo Red (CR) and Brilliant Blue G (BBG) binding in Shewanella algae, a marine indigenous bacterium and occasional human pathogen. Microscopic analysis of colonies formed by the wild-type strain S. algae CECT 5071 and three transposon integration mutants representing the diversity of colony morphotypes showed production of biofilm extracellular polymeric substances (EPS) and distinctive morphological alterations. Electrophoretic and chemical analyses of extracted EPS showed differential patterns between strains, although the targets of CR and BBG binding remain to be identified. Galactose and galactosamine were the preponderant sugars in the colony biofilm EPS of S. algae. Surface-associated biofilm formation of transposon integration mutants was not directly correlated with a distinct colony morphotype. The hybrid sensor histidine kinase BarA abrogated surface-associated biofilm formation. Ectopic expression of the kinase and mutants in the phosphorelay cascade partially recovered biofilm formation. Altogether, this work provides the basic analysis to subsequently address the complex and intertwined networks regulating colony morphology and biofilm formation in this poorly understood species.

Dominance Between Plasmids Determines the Extent of Biofilm Formation

Bacterial biofilms have an impact in medical and industrial environments because they often confer protection to bacteria against harmful agents, and constitute a source from which microorganisms can disperse. Conjugative plasmids can enhance bacterial ability to form biofilms because conjugative pili act as adhesion factors. However, plasmids may interact with each other, either facilitating or inhibiting plasmid transfer. Accordingly, we asked whether effects on plasmid transfer also impacts biofilm formation. We measured biofilm formation of Escherichia coli cells harboring two plasmid types, or when the two plasmids were present in the same population but carried in different cells. Using eleven natural isolated conjugative plasmids, we confirmed that some indeed promote biofilm formation and, importantly, that this ability is correlated with conjugative efficiency. Further we studied the effect of plasmid pairs on biofilm formation. We observed increased biofilm formation in approximately half of the combinations when both plasmids inhabited the same cell or when the plasmids were carried in different cells. Moreover, in approximately half of the combinations, independent of the co-inhabitation conditions, one of the plasmids alone determined the extent of biofilm formation – thus having a dominant effect over the other plasmid. The molecular mechanisms responsible for these interactions were not evaluated here and future research is required to elucidate them.

The Impact of IPTG Induction on Plasmid Stability and Heterologous Protein Expression by Escherichia coli Biofilms

This work assesses the effect of chemical induction with isopropyl β-D-1-thiogalactopyranoside (IPTG) on the expression of enhanced green fluorescent protein (eGFP) by planktonic and biofilm cells of Escherichia coli JM109(DE3) transformed with a plasmid containing a T7 promoter. It was shown that induction negatively affected the growth and viability of planktonic cultures, and eGFP production did not increase. Heterologous protein production was not limited by gene dosage or by transcriptional activity. Results suggest that plasmid maintenance at high copy number imposes a metabolic burden that precludes high level expression of the heterologous protein. In biofilm cells, the inducer avoided the overall decrease in the amount of expressed eGFP, although this was not correlated with the gene dosage. Higher specific production levels were always attained with biofilm cells and it seems that while induction of biofilm cells shifts their metabolism towards the maintenance of heterologous protein concentration, in planktonic cells the cellular resources are directed towards plasmid replication and growth.

Recombinant protein expression in biofilms

Biofilm research is usually focused on the prevention or control of biofilm formation. Recently, the significance of the biofilm mode of growth in biotechnological applications received increased attention. Since biofilm reactors show many advantages over suspended cell reactors, especially in their higher biomass density and operational stability, bacterial biofilms have emerged as an interesting approach for the expression of specific proteins. Despite the potential of biofilm systems, recombinant protein production using biofilms has been scarcely investigated for the past 25 years. Our group has demonstrated that E. coli biofilms were able to produce a model recombinant protein, the enhanced green fluorescent protein (eGFP), at much higher levels than their planktonic counterparts. Even without optimization of cultivation conditions, an attractive productivity was obtained, indicating that biofilm cultures can be used as an alternative form of high cell density cultivation (HCDC). E. coli remains one of the favorite hosts for recombinant protein production and it has been successfully used in metabolic engineering for the synthesis of high value products. This review presents the advantages and concerns of using biofilms for the production of recombinant proteins and summarizes the different biofilm systems which have been described for this purpose. The relative advantages and disadvantages of the four microbial hosts tested for recombinant protein production in biofilms (two bacteria and two filamentous fungi) are also discussed.

Comparing the Recombinant Protein Production Potential of Planktonic and Biofilm Cells

Recombinant protein production in bacterial cells is commonly performed using planktonic cultures. However, the natural state for many bacteria is living in communities attached to surfaces forming biofilms. In this work, a flow cell system was used to compare the production of a model recombinant protein (enhanced green fluorescent protein, eGFP) between planktonic and biofilm cells. The fluorometric analysis revealed that when the system was in steady state, the average specific eGFP production from Escherichia coli biofilm cells was 10-fold higher than in planktonic cells. Additionally, epifluorescence microscopy was used to determine the percentage of eGFP-expressing cells in both planktonic and biofilm populations. In steady state, the percentage of planktonic-expressing cells oscillated around 5%, whereas for biofilms eGFP-expressing cells represented on average 21% of the total cell population. Therefore, the combination of fluorometric and microscopy data allowed us to conclude that E. coli biofilm cells can have a higher recombinant protein production capacity when compared to their planktonic counterparts.

It is all about location: how to pinpoint microorganisms and their functions in multispecies biofilms

Multispecies biofilms represent the dominant mode of life for the vast majority of microorganisms. Bacterial spatial localization in such biostructures governs ecological interactions between different populations and triggers the overall community functions. Here, we discuss the pros and cons of fluorescence-based techniques used to decipher bacterial species patterns in biofilms at single cell level, including fluorescence in situ hybridization and the use of genetically modified bacteria that express fluorescent proteins, reporting the significant improvements of those techniques. The development of tools for spatial and temporal study of multispecies biofilms will allow live imaging and spatial localization of cells in naturally occurring biofilms coupled with metabolic information, increasing insight of microbial community and the relation between its structure and functions.

SEM Analysis of Surface Impact on Biofilm Antibiotic Treatment

The aim of this work was to use scanning electron microscopy (SEM) to investigate the effect of ampicillin treatment on Escherichia coli biofilms formed on two surface materials with different properties, silicone (SIL) and glass (GLA). Epifluorescence microscopy (EM) was initially used to assess biofilm formation and killing efficiency on both surfaces. This technique showed that higher bacterial colonization was obtained in the hydrophobic SIL than in the hydrophilic GLA. It has also shown that higher biofilm inactivation was attained for GLA after the antibiotic treatment (7-log reduction versus 1-log reduction for SIL). Due to its high resolution and magnification, SEM enabled a more detailed analysis of the antibiotic effect on biofilm cells, complementing the killing efficiency information obtained by EM. SEM micrographs revealed that ampicillin-treated cells have an elongated form when compared to untreated cells. Additionally, it has shown that different materials induced different levels of elongation on cells exposed to antibiotic. Biofilms formed on GLA showed a 37% higher elongation than those formed on SIL. Importantly, cell elongation was related to viability since ampicillin had a higher bactericidal effect on GLA-formed biofilms. These findings raise the possibility of using SEM for understanding the efficacy of antimicrobial treatments by observation of biofilm morphology.

Critical review on biofilm methods

Biofilms are widespread in nature and constitute an important strategy implemented by microorganisms to survive in sometimes harsh environmental conditions. They can be beneficial or have a negative impact particularly when formed in industrial settings or on medical devices. As such, research into the formation and elimination of biofilms is important for many disciplines. Several new methodologies have been recently developed for, or adapted to, biofilm studies that have contributed to deeper knowledge on biofilm physiology, structure and composition. In this review, traditional and cutting-edge methods to study biofilm biomass, viability, structure, composition and physiology are addressed. Moreover, as there is a lack of consensus among the diversity of techniques used to grow and study biofilms. This review intends to remedy this, by giving a critical perspective, highlighting the advantages and limitations of several methods. Accordingly, this review aims at helping scientists in finding the most appropriate and up-to-date methods to study their biofilms.

Quantifying Attachment and Antibiotic Resistance of from Conventional and Organic Swine Manure

Broad-spectrum antibiotics are often administered to swine, contributing to the occurrence of antibiotic-resistant bacteria in their manure. During land application, the bacteria in swine manure preferentially attach to particles in the soil, affecting their transport in overland flow. However, a quantitative understanding of these attachment mechanisms is lacking, and their relationship to antibiotic resistance is unknown. The objective of this study is to examine the relationships between antibiotic resistance and attachment to very fine silica sand in collected from swine manure. A total of 556 isolates were collected from six farms, two organic and four conventional (antibiotics fed prophylactically). Antibiotic resistance was quantified using 13 antibiotics at three minimum inhibitory concentrations: resistant, intermediate, and susceptible. Of the 556 isolates used in the antibiotic resistance assays, 491 were subjected to an attachment assay. Results show that isolates from conventional systems were significantly more resistant to amoxicillin, ampicillin, chlortetracycline, erythromycin, kanamycin, neomycin, streptomycin, tetracycline, and tylosin ( < 0.001). Results also indicate that isolated from conventional systems attached to very fine silica sand at significantly higher levels than those from organic systems ( < 0.001). Statistical analysis showed that a significant relationship did not exist between antibiotic resistance levels and attachment in from conventional systems but did for organic systems ( < 0.001). Better quantification of these relationships is critical to understanding the behavior of in the environment and preventing exposure of human populations to antibiotic-resistant bacteria.

The influence of biofilms in the biology of plasmids

The field of plasmid biology has historically focused on bacteria growing in liquid culture. Surface attached communities of bacterial biofilms have recently been understood to be the normal environment of bacteria in the natural world. Thus, studies examining plasmid replication, maintenance, and transfer in biofilms are essential for a true understanding of bacterial plasmid biology. This chapter reviews the current knowledge of the interplay between bacterial biofilms and plasmids, focusing on the role of plasmids in biofilm development and the role of biofilms in plasmid maintenance, copy number control, and transfer. The studies examined herein highlight the importance of biofilms as an important ecological niche in which bacterial plasmids play an essential role.

Study on the promotion of bacterial biofilm formation by a Salmonella conjugative plasmid and the underlying mechanism

To investigate the effect of the pRST98 plasmid, originally isolated from Salmonella enterica serovar Typhi (S. Typhi), on biofilm (BF) formation, we carried out in vitro experiments using S. Typhi, Salmonella enterica serovar Typhimurium (S. Typhimurium) and Escherichia coli (E. coli). We further explored the effects of pRST98 in vivo by establishing two animal models, a tumor-bearing mouse model and a mouse urethral catheter model. Moreover, we examined the relationship between the quorum-sensing (QS) system and pRST98-mediated BF formation. These studies showed that pRST98 enhanced BF formation in different bacteria in vitro. In both animal models, pRST98 promoted BF formation and caused more severe pathological changes. It was previously reported that Salmonella senses exogenous N-acylhomoserine lactones (AHLs) through the regulatory protein SdiA and regulates the expression of genes including the virulence gene rck, which is located on the virulence plasmid of some serotypes of Salmonella. In this study, we confirmed the locus of the rck gene on pRST98 and found that AHLs increased rck expression in pRST98-carrying strains, thereby enhancing bacterial adherence, serum resistance and bacterial BF formation. In conclusion, the Salmonella conjugative plasmid pRST98 promotes bacterial BF formation both in vitro and in vivo, and the mechanism may relate to the AHL-SdiA-Rck signaling pathway.

Escherichia coli adhesion, biofilm development and antibiotic susceptibility on biomedical materials

The aim of this work was to test materials typically used in the construction of medical devices regarding their influence in the initial adhesion, biofilm development and antibiotic susceptibility of Escherichia coli biofilms. Adhesion and biofilm development was monitored in 12-well microtiter plates containing coupons of different biomedical materials--silicone (SIL), stainless steel (SS) and polyvinyl chloride (PVC)--and glass (GLA) as control. The susceptibility of biofilms to ciprofloxacin and ampicillin was assessed, and the antibiotic effect in cell morphology was observed by scanning electron microscopy. The surface hydrophobicity of the bacterial strain and materials was also evaluated from contact angle measurements. Surface hydrophobicity was related with initial E. coli adhesion and subsequent biofilm development. Hydrophobic materials, such as SIL, SS, and PVC, showed higher bacterial colonization than the hydrophilic GLA. Silicone was the surface with the greatest number of adhered cells and the biofilms formed on this material were also less susceptible to both antibiotics. It was found that different antibiotics induced different levels of elongation on E. coli sessile cells. Results revealed that, by affecting the initial adhesion, the surface properties of a given material can modulate biofilm buildup and interfere with the outcome of antimicrobial therapy. These findings raise the possibility of fine-tuning surface properties as a strategy to reach higher therapeutic efficacy.

Biofilm localization in the vertical wall of shaking 96-well plates

Microtiter plates with 96 wells are being increasingly used for biofilm studies due to their high throughput, low cost, easy handling, and easy application of several analytical methods to evaluate different biofilm parameters. These methods provide bulk information about the biofilm formed in each well but lack in detail, namely, regarding the spatial location of the biofilms. This location can be obtained by microscopy observation using optical and electron microscopes, but these techniques have lower throughput and higher cost and are subjected to equipment availability. This work describes a differential crystal violet (CV) staining method that enabled the determination of the spatial location of Escherichia coli biofilms formed in the vertical wall of shaking 96-well plates. It was shown that the biofilms were unevenly distributed on the wall with denser cell accumulation near the air-liquid interface. The results were corroborated by scanning electron microscopy and a correlation was found between biofilm accumulation and the wall shear strain rates determined by computational fluid dynamics. The developed method is quicker and less expensive and has a higher throughput than the existing methods available for spatial location of biofilms in microtiter plates.

The influence of antibiotic resistance gene carriage on biofilm formation by two Escherichia coli strains associated with urinary tract infections

Urinary tract infections (UTI) caused by uropathogenic Escherichia coli are one of the most common forms of human disease. In this study, the effect of the presence of newly acquired antibiotic resistance genes on biofilm formation of UTI-associated E. coli strains was examined. Two clinical UTI-associated E. coli strains (SMC18 and SMC20) carrying different combinations of virulence genes were transformed with pGEM-T, pGEM-T::KmΔAmp, or pGEM-T::Km to construct ampicillin-resistant (KmSAmpR), kanamycin-resistant (KmRAmpS), or ampicillin- and kanamycin-resistant (KmRAmpR) strains. Transformed and wild-type strains were characterized for biofilm formation, bacterial surface hydrophobicity, auto-aggregation, morphology, and attachment to abiotic surfaces. Transformation with a plasmid carrying an ampicillin resistance gene alone decreased (p < 0.05) biofilm formation by SMC18 (8 virulence marker genes) but increased (p < 0.05) biofilm formation by SMC20 (5 virulence marker genes). On the other hand, transformation with a plasmid carrying a kanamycin resistance gene alone or both ampicillin and kanamycin resistance genes resulted in a decrease (p < 0.05) in biofilm formation by SMC18 but did not affect (p > 0.05) the biofilm formation by SMC20. Our results suggest that transformation of UTI-associated E. coli with plasmids carrying different antibiotic resistance gene(s) had a significant impact on biofilm formation and that these effects were both strain dependent and varied between different antibiotics.

96-well microtiter plates for biofouling simulation in biomedical settings

Microtiter plates with 96 wells are routinely used in biofilm research mainly because they enable high-throughput assays. These platforms are used in a variety of conditions ranging from static to dynamic operation using different shaking frequencies and orbital diameters. The main goals of this work were to assess the influence of nutrient concentration and flow conditions on biofilm formation by Escherichia coli in microtiter plates and to define the operational conditions to be used in order to simulate relevant biomedical scenarios. Assays were performed in static mode and in incubators with distinct orbital diameters using different concentrations of glucose, peptone and yeast extract. Computational fluid dynamics (CFD) was used to simulate the flow inside the wells for shaking frequencies ranging from 50 to 200 rpm and orbital diameters from 25 to 100 mm. Higher glucose concentrations enhanced adhesion of E. coli in the first 24 h, but variation in peptone and yeast extract concentration had no significant impact on biofilm formation. Numerical simulations indicate that 96-well microtiter plates can be used to simulate a variety of biomedical scenarios if the operating conditions are carefully set.

Flow cells as quasi-ideal systems for biofouling simulation of industrial piping systems

Semi-circular flow cells are often used to simulate the formation of biofilms in industrial pipes with circular section because their planar surface allows easy sampling using coupons. Computational fluid dynamics was used to assess whether the flow in pipe systems can be emulated by the semi-circular flow cells that are used to study biofilm formation. The results show that this is the case for Reynolds numbers (Re) ranging from 10 to 1000 and 3500 to 10,000. A correspondence involving the friction factor was obtained in order to correlate any semi-circular flow cell to any circular pipe for Re between 10 and 100,000. The semi-circular flow cell was then used to assess experimentally the effect of Reynolds number (Re = 4350 and 6720) on planktonic cell concentration and biofilm formation using Escherichia coli JM109 (DE3). Lower planktonic cell concentrations and thicker biofilms (>1.2 mm) were obtained with the lower Re.