Cellobiohydrolase A (CbhA) from the cellulolytic bacterium Cellulomonas fimi is a beta-1,4-exocellobiohydrolase analogous to Trichoderma reesei CBH II

The chitin-binding domain of Bacillus thuringiensis ChiA74 inhibits gram-negative bacterial and fungal pathogens of humans and plants

The chitinase ChiA74 is synthesized by Bacillus thuringiensis and possesses a modular organization composed of four domains. In the C-terminal of the enzyme is located the chitin-binding domain (CBD), which has not been isolated as a single unit or characterized. Here, we aimed to isolate the ChiA74's CBD as a single unit, determine the binding properties, and evaluate its antimicrobial and hemolytic activities. We cloned the ChiA74's CBD and expressed it in Escherichia coli BL21. The single domain was purified, analyzed by SDS-PAGE, and characterized. The recombinant CBD (rCBD) showed a molecular mass of ∼14 kDa and binds strongly to α-chitin, with Kd and Bmax of ∼4.7 ± 0.9 μM and 1.5 ± 0.1 μmoles/g chitin, respectively. Besides, the binding potential (Bmax/Kd) was stronger for α-chitin (∼0.31) than microcrystalline cellulose (∼0.19). It was also shown that the purified rCBD inhibited the growth of the clinically relevant Gram-negative bacteria (GNB) Vibrio cholerae, and V. parahemolyticus CVP2 with minimum inhibitory concentrations (MICs) of 121 ± 9.9 and 138 ± 3.2 μg/mL, respectively, and of one of the most common GNB plant pathogens, Pseudomonas syringae with a MIC of 230 ± 13.8 μg/mL. In addition, the rCBD possessed antifungal activity inhibiting the conidia germination of Fusarium oxysporum (MIC = 192 ± 37.5 μg/mL) and lacked hemolytic and agglutination activities against human erythrocytes. The significance of this work lies in the fact that data provided here show for the first time that ChiA74's CBD from B. thuringiensis has antimicrobial activity, suggesting its potential use against significant pathogenic microorganisms. Future works will be focused on testing the inhibitory effect against other pathogenic microorganisms and elucidating the mechanism of action.

Two β-glucanases from bacterium Cellulomonas flavigena: expression in Pichia pastoris, properties, biotechnological potential

In the genome of Cellulomonas flavigena, two genes that potentially encode endoglucanases - Cfla_2912 and Cfla_2913 were identified. We cloned the genes and created Pichia pastoris-based recombinant producers of two proteins that were expressed from the AOX1 promoter. Each of the endoglucanase molecules contains a GH6 catalytic domain, CBM2 carbohydrate-binding module, and TAT signal peptide. The fermentation of the producers was carried out in a 10 L fermenter; Cfla_2912 and Cfla_2913 were purified using affinity chromatography. The yield comprised 10.3 mg/ml (430 U/ml) for Cfla_2913 and 9 mg/ml (370 U/ml) for Cfla_2912. Cfla_2912 and Cfla_2913 were found to have a high activity against barley β-glucan and lichenan, a weak activity against carboxymethyl cellulose (CMC), phosphoric-acid treated cellulose, and no activity against laminarin, xylan, soluble starch, microcrystalline cellulose, cellobiose, and cellotriose. Thus, the proteins exhibited β-glucanase activity. Both proteins had a neutral pH optimum of about 7.0 and were more stable at neutral and slightly alkaline pH ranging from 7.0 to 9.0. Cfla_2912 and Cfla_2913 showed a moderate thermal stability. The products of barley β-glucan hydrolysis by Cfla_2912 and Cfla_2913 were trisaccharide, tetrasaccharide, and cellobiose. Cfla_2912 and Cfla_2913 efficiently hydrolyzed cereal polysaccharides, which indicate that they may have biotechnological potential.

Physiological and transcriptional studies reveal Cr(VI) reduction mechanisms in the exoelectrogen Cellulomonas fimi Clb-11

A facultative exoelectrogen, Cellulomonas fimi strain Clb-11, was isolated from polluted river water. This strain could generate electricity in microbial fuel cells (MFCs) with carboxymethyl cellulose (CMC) as the carbon source, and the maximum output power density was 12.17 ± 2.74 mW·m^-2. In addition, Clb-11 could secrete extracellular chromate reductase or extracellular electron mediator to reduce Cr(VI) to Cr(III). When the Cr(VI) concentration was less than 0.5 mM in Luria-Bertani (LB) medium, Cr(VI) could be completely reduced by Clb-11. However, the Clb-11 cells swelled significantly in the presence of Cr(VI). We employed transcriptome sequencing analysis to identify genes involved in different Cr(VI) stress responses in Clb-11. The results indicate that 99 genes were continuously upregulated while 78 genes were continuously downregulated as the Cr(VI) concentration increased in the growth medium. These genes were mostly associated with DNA replication and repair, biosynthesis of secondary metabolites, ABC transporters, amino sugar and nucleotide sugar metabolism, and carbon metabolism. The swelling of Clb-11 cells might have been related to the upregulation of the genes atoB, INO1, dhaM, dhal, dhak, and bccA, which encode acetyl-CoA C-acetyltransferase, myo-inositol-1-phosphate synthase, phosphoenolpyruvate-glycerone phosphotransferase, and acetyl-CoA/propionyl-CoA carboxylase, respectively. Interestingly, the genes cydA and cydB related to electron transport were continuously downregulated as the Cr(VI) concentration increased. Our results provide clues to the molecular mechanism of Cr(VI) reduction by microorganisms in MFCs systems.

Role for a Lytic Polysaccharide Monooxygenase in Cell Wall Remodeling in Streptomyces coelicolor

Peptidoglycan is a major constituent of the bacterial cell wall and an important determinant for providing protection to cells. In addition to peptidoglycan, many bacteria synthesize other glycans that become part of the cell wall. Streptomycetes grow apically, where they synthesize a glycan that is exposed at the outer surface, but how it gets there is unknown. Here, we show that deposition of the apical glycan at the cell surface of Streptomyces coelicolor depends on two key enzymes, the glucanase CslZ and the lytic polysaccharide monooxygenase LpmP. Activity of these enzymes allows localized remodeling and degradation of the peptidoglycan, and we propose that this facilitates passage of the glycan. The absence of both enzymes not only prevents morphological development but also sensitizes strains to lysozyme. Given that lytic polysaccharide monooxygenases are commonly found in microbes, this newly identified biological role in cell wall remodeling may be widespread.

Large-scale protein level comparison of Deltaproteobacteria reveals cohesive metabolic groups

Deltaproteobacteria, now proposed to be the phyla Desulfobacterota, Myxococcota, and SAR324, are ubiquitous in marine environments and play essential roles in global carbon, sulfur, and nutrient cycling. Despite their importance, our understanding of these bacteria is biased towards cultured organisms. Here we address this gap by compiling a genomic catalog of 1 792 genomes, including 402 newly reconstructed and characterized metagenome-assembled genomes (MAGs) from coastal and deep-sea sediments. Phylogenomic analyses reveal that many of these novel MAGs are uncultured representatives of Myxococcota and Desulfobacterota that are understudied. To better characterize Deltaproteobacteria diversity, metabolism, and ecology, we clustered ~1 500 genomes based on the presence/absence patterns of their protein families. Protein content analysis coupled with large-scale metabolic reconstructions separates eight genomic clusters of Deltaproteobacteria with unique metabolic profiles. While these eight clusters largely correspond to phylogeny, there are exceptions where more distantly related organisms appear to have similar ecological roles and closely related organisms have distinct protein content. Our analyses have identified previously unrecognized roles in the cycling of methylamines and denitrification among uncultured Deltaproteobacteria. This new view of Deltaproteobacteria diversity expands our understanding of these dominant bacteria and highlights metabolic abilities across diverse taxa.

Identification and characterization of a novel endo-β-1,4-glucanase from a soil metagenomic library

A cosmid clone cZFYN1413 with CMCase activity was identified from a soil metagenomic library. The sequence analysis of a subclone of cZFYN1413 revealed an endo-β-1,4-glucanase gene ZFYN1413 belonging to glycoside hydrolase family 6 and a transmembrane region in the N-terminal of ZFYN1413. Expression of ZFYN1413 in Escherichia coli BL21 (DE3) resulted in ZFYN1413-87, which was a truncated protein cleaved in transmembrane region of ZFYN1413. ZFYN1413-87 was expressed and its enzyme properties were studied. ZFYN1413-87 possessed strong endo-β-1,4-glucanase activity, and 52% of the activity could be retained after the protein was treated in buffer of pH 3.0 for 2 h. The study provided a special example of endo-β-1,4-glucanase in GH6 family.

Domain architecture divergence leads to functional divergence in binding and catalytic domains of bacterial and fungal cellobiohydrolases

Cellobiohydrolases directly convert crystalline cellulose into cellobiose and are of biotechnological interest to achieve efficient biomass utilization. As a result, much research in the field has focused on identifying cellobiohydrolases that are very fast. Cellobiohydrolase A from the bacterium Cellulomonas fimi (CfCel6B) and cellobiohydrolase II from the fungus Trichoderma reesei (TrCel6A) have similar catalytic domains (CDs) and show similar hydrolytic activity. However, TrCel6A and CfCel6B have different cellulose-binding domains (CBDs) and linkers: TrCel6A has a glycosylated peptide linker, whereas CfCel6B's linker consists of three fibronectin type 3 domains. We previously found that TrCel6A's linker plays an important role in increasing the binding rate constant to crystalline cellulose. However, it was not clear whether CfCel6B's linker has similar function. Here we analyze kinetic parameters of CfCel6B using single-molecule fluorescence imaging to compare CfCel6B and TrCel6A. We find that CBD is important for initial binding of CfCel6B, but the contribution of the linker to the binding rate constant or to the dissociation rate constant is minor. The crystal structure of the CfCel6B CD showed longer loops at the entrance and exit of the substrate-binding tunnel compared with TrCel6A CD, which results in higher processivity. Furthermore, CfCel6B CD showed not only fast surface diffusion but also slow processive movement, which is not observed in TrCel6A CD. Combined with the results of a phylogenetic tree analysis, we propose that bacterial cellobiohydrolases are designed to degrade crystalline cellulose using high-affinity CBD and high-processivity CD.

Convergent evolution of processivity in bacterial and fungal cellulases

Some cellulases exhibit “processivity”: the ability to degrade crystalline cellulose through successive hydrolytic catalytic reactions without the release of the enzyme from the substrate surface. We previously observed the movement of fungal processive cellulases by high-speed atomic force microscopy, and here, we use the same technique to directly observe the processive movement of bacterial cellobiohydrolases settling a long-standing controversy. Although fungal and bacterial processive cellulases have completely different protein folds, they have evolved to acquire processivity through the same strategy of adding subsites to extend the substrate-binding site and forming a tunnel-like active site by increasing the number of loops covering the active site. This represents an example of protein-level convergent evolution to acquire the same functions from different ancestors.

Cellulose is the most abundant biomass on Earth, and many microorganisms depend on it as a source of energy. It consists mainly of crystalline and amorphous regions, and natural degradation of the crystalline part is highly dependent on the degree of processivity of the degrading enzymes (i.e., the extent of continuous hydrolysis without detachment from the substrate cellulose). Here, we report high-speed atomic force microscopic (HS-AFM) observations of the movement of four types of cellulases derived from the cellulolytic bacteria Cellulomonas fimi on various insoluble cellulose substrates. The HS-AFM images clearly demonstrated that two of them (CfCel6B and CfCel48A) slide on crystalline cellulose. The direction of processive movement of CfCel6B is from the nonreducing to the reducing end of the substrate, which is opposite that of processive cellulase Cel7A of the fungus Trichoderma reesei (TrCel7A), whose movement was first observed by this technique, while CfCel48A moves in the same direction as TrCel7A. When CfCel6B and TrCel7A were mixed on the same substrate, “traffic accidents” were observed, in which the two cellulases blocked each other’s progress. The processivity of CfCel6B was similar to those of fungal family 7 cellulases but considerably higher than those of fungal family 6 cellulases. The results indicate that bacteria utilize family 6 cellulases as high-processivity enzymes for efficient degradation of crystalline cellulose, whereas family 7 enzymes have the same function in fungi. This is consistent with the idea of convergent evolution of processive cellulases in fungi and bacteria to achieve similar functionality using different protein foldings.

Industrial Use of Cell Wall Degrading Enzymes: The Fine Line Between Production Strategy and Economic Feasibility

Cell Wall Degrading Enzymes (CWDEs) are a heterogeneous group of enzymes including glycosyl-hydrolases, oxidoreductases, lyases, and esterases. Microbes with degrading activities toward plant cell wall polysaccharides are the most relevant source of CWDEs for industrial applications. These organisms secrete a wide array of CWDEs in amounts strictly necessary for their own sustenance, nonetheless the production of CWDEs from wild type microbes can be increased at large-scale by using optimized fermentation strategies. In the last decades, advances in genetic engineering allowed the expression of recombinant CWDEs also in lab-domesticated organisms such as E. coli, yeasts and plants, dramatically increasing the available options for the large-scale production of CWDEs. The optimization of a CWDE-producing biofactory is a hard challenge that biotechnologists tackle by testing different expression strategies and expression-hosts. Although both the yield and production costs are critical factors to produce biomolecules at industrial scale, these parameters are often disregarded in basic research. This review presents the main characteristics and industrial applications of CWDEs directed toward the cell wall of plants, bacteria, fungi and microalgae. Different biofactories for CWDE expression are compared in order to highlight strengths and weaknesses of each production system and how these aspects impact the final enzyme cost and, consequently, the economic feasibility of using CWDEs for industrial applications.

Characterisation of novel biomass degradation enzymes from the genome of Cellulomonas fimi

•

Identified over 90 putative polysaccharide degrading ORFs in C. fimi genome.

•

Cloned 14 putative cellulolytic ORFs as BioBricks, screened them for activity.

•

Partially purified AfsB, BxyF, BxyH and XynF and characterised them further.

•

BxyH proved highly temperature and alkaline pH tolerant.

•

BioBricks are an easy method for screening genes for specific activities.

Recent analyses of genome sequences belonging to cellulolytic bacteria have revealed many genes potentially coding for cellulosic biomass degradation enzymes. Annotation of these genes however, is based on few biochemically characterised examples. Here we present a simple strategy based on BioBricks for the rapid screening of candidate genes expressed in Escherichia coli. As proof of principle we identified over 70 putative biomass degrading genes from bacterium Cellulomonas fimi, expressing a subset of these in BioBrick format. Six novel genes showed activity in E. coli. Four interesting enzymes were characterised further. α-l-arabinofuranosidase AfsB, β-xylosidases BxyF and BxyH and multi-functional β-cellobiosidase/xylosidase XynF were partially purified to determine their optimum pH, temperature and kinetic parameters. One of these enzymes, BxyH, was unexpectedly found to be highly active at strong alkaline pH and at temperatures as high as 100 °C. This report demonstrates a simple method of quickly screening and characterising putative genes as BioBricks.

Characterization of a thermostable endoglucanase from Cellulomonas fimi ATCC484

Bacteria in the genus Cellulomonas are well known as secretors of a variety of mesophilic carbohydrate degrading enzymes (e.g., cellulases and hemicellulases), active against plant cell wall polysaccharides. Recent proteomic analysis of the mesophilic bacterium Cellulomonas fimi ATCC484 revealed uncharacterized enzymes for the hydrolysis of plant cell wall biomass. Celf_1230 (CfCel6C), a secreted protein of Cellulomonas fimi ATCC484, is a novel member of the GH6 family of cellulases that could be successfully expressed in Escherichia coli. This enzyme displayed very little enzymatic/hydrolytic activity at 30 °C, but showed an optimal activity around 65 °C, and exhibited a thermal denaturation temperature of 74 °C. In addition, it also strongly bound to filter paper despite having no recognizable carbohydrate binding module. Our experiments show that CfCel6C is a thermostable endoglucanase with activity on a variety of β-glucans produced by an organism that struggles to grow above 30 °C.

A bacterial GH6 cellobiohydrolase with a novel modular structure

Cel6D from Paenibacillus barcinonensis is a modular cellobiohydrolase with a novel molecular architecture among glycosyl hydrolases of family 6. It contains an N-terminal catalytic domain (family 6 of glycosyl hydrolases (GH6)), followed by a fibronectin III-like domain repeat (Fn3_1,2) and a C-terminal family 3b cellulose-binding domain (CBM3b). The enzyme has been identified and purified showing catalytic activity on cellulosic substrates and cellodextrins, with a marked preference for phosphoric acid swollen cellulose (PASC). Analysis of mode of action of Cel6D shows that it releases cellobiose as the only hydrolysis product from cellulose. Kinetic parameters were determined on PASC showing a K _m of 68.73 mg/ml and a V _max of 1.73 U/mg. A series of truncated derivatives of Cel6D have been constructed and characterized. Deletion of CBM3b caused a notable reduction in hydrolytic activity, while deletion of the Fn3 domain abolished activity, as the isolated GH6 domain was not active on any of the substrates tested. Mutant enzymes Cel6D-D146A and Cel6D-D97A were constructed in the residues corresponding to the putative acid catalyst and to the network for the nucleophilic attack. The lack of activity of the mutant enzymes indicates the important role of these residues in catalysis. Analysis of cooperative activity of Cel6D with cellulases from the same producing P. barcinonensis strain reveals high synergistic activity with processive endoglucanase Cel9B on hydrolysis of crystalline substrates. The characterized cellobiohydrolase can be a good contribution for depolymerization of cellulosic substrates and for the deconstruction of native cellulose.

A novel GH6 cellobiohydrolase from Paenibacillus curdlanolyticus B-6 and its synergistic action on cellulose degradation

We recently discovered a novel glycoside hydrolase family 6 (GH6) cellobiohydrolase from Paenibacillus curdlanolyticus B-6 (PcCel6A), which is rarely found in bacteria. This enzyme is a true exo-type cellobiohydrolase which exhibits high substrate specificity on amorphous cellulose and low substrate specificity on crystalline cellulose, while this showed no activity on substitution substrates, carboxymethyl cellulose and xylan, distinct from all other known GH6 cellobiohydrolases. Product profiles, HPLC analysis of the hydrolysis products and a schematic drawing of the substrate-binding subsites catalysing cellooligosaccharides can explain the new mode of action of this enzyme which prefers to hydrolyse cellopentaose. PcCel6A was not inhibited by glucose or cellobiose at concentrations up to 300 and 100 mM, respectively. A good synergistic effect for glucose production was found when PcCel6A acted together with processive endoglucanase Cel9R from Clostridium thermocellum and β-glucosidase CglT from Thermoanaerobacter brockii. These properties of PcCel6A make it a suitable candidate for industrial application in the cellulose degradation process.

Proteomic Analysis of the Secretome of Cellulomonas fimi ATCC 484 and Cellulomonas flavigena ATCC 482

The bacteria in the genus Cellulomonas are known for their ability to degrade plant cell wall biomass. Cellulomonas fimi ATCC 484 and C. flavigena ATCC 482 have been the subject of much research into secreted cellulases and hemicellulases. Recently the genome sequences of both C. fimi ATCC 484 and C. flavigena ATCC 482 were published, and a genome comparison has revealed their full spectrum of possible carbohydrate-active enzymes (CAZymes). Using mass spectrometry, we have compared the proteins secreted by C. fimi and C. flavigena during growth on the soluble cellulose substrate, carboxymethylcellulose (CMC), as well as a soluble xylan fraction. Many known C. fimi CAZymes were detected, which validated our analysis, as were a number of new CAZymes and other proteins that, though identified in the genome, have not previously been observed in the secretome of either organism. Our data also shows that many of these are co-expressed on growth of either CMC or xylan. This analysis provides a new perspective on Cellulomonas enzymes and provides many new CAZyme targets for characterization.

Real-time PCR for quantification in soil of glycoside hydrolase family 6 cellulase genes

Cellulose is the main structural component of the cell walls of higher plants, representing c. 35-50% of a plant's dry weight; after decomposition and transformation, and constituting a large part of soil organic matter. Telluric micro-organisms able to use cellulose as carbon and energy sources for growth are widely distributed in the environment, but the factors controlling the rate of cellulose degradation are not well understood. In this study, we have developed a quantitative real-time PCR (qPCR) primer set to quantify the glycoside hydrolase family 6 (GH6 family) cellulase genes in soil samples. The qPCR assays were linear over 8 orders of magnitude and sensitive down to 10 copies per assay. qPCR analysis of contrasted soil samples showed densities between 2·47 × 10(7) and 1·48 × 10(10) copies per gram of soil. Cloning and sequencing of the PCR products from environmental DNA confirmed both specific amplification (more than 96%) and the wide diversity targeted by the primer set, throughout nearly all the GH6 family, including sequences of bacteria and fungi.

SIGNIFICANCE AND IMPACT OF THE STUDY

Telluric micro-organisms able to use cellulose as carbon and energy sources for growth are widely distributed in the environment, but the factors controlling the rate of cellulose degradation are not well understood. The objective of our study was to develop a qPCR for rapid quantification of GH6 cellulase genes in soil. This qPCR could be applied to study the potential for cellulose degradation in different soils in order to better understand the factors controlling the stability of the soil organic matter.

Directed evolution of an exoglucanase facilitated by a co-expressed β-glucosidase and construction of a whole engineered cellulase system in Escherichia coli

A novel high-throughput screening method is proposed for the directed evolution of exoglucanase facilitated by the co-expression of β-glucosidase, using the glucose released from filter paper as the screening indicator. Three transformants (B1, D6 and G10) with improved activity were selected from 4,000 colonies. The specific activities of B1, D6 and G10 for releasing glucose were, respectively, 1.4-, 1.3- and 1.6-fold higher than that of the wild type. The engineered exoglucanase gene was inserted into an expression vector carrying the previously engineered endoglucanase and β-glucosidase genes, and transformed into Escherichia coli to form a completely engineered cellulase system that showed 8.2-fold increase in glucose production (relative activity) compared to the cells equipped with wild-type enzymes. To our knowledge, this is the first report for directed evolution of an exoglucanase using insoluble cellulose as the screening substrate.

Saccharification of cellulose by recombinant Rhodococcus opacus PD630 strains

The noncellulolytic actinomycete Rhodococcus opacus strain PD630 is the model oleaginous prokaryote with regard to the accumulation and biosynthesis of lipids, which serve as carbon and energy storage compounds and can account for as much as 87% of the dry mass of the cell in this strain. In order to establish cellulose degradation in R. opacus PD630, we engineered strains that episomally expressed six different cellulase genes from Cellulomonas fimi ATCC 484 (cenABC, cex, cbhA) and Thermobifida fusca DSM43792 (cel6A), thereby enabling R. opacus PD630 to degrade cellulosic substrates to cellobiose. Of all the enzymes tested, five exhibited a cellulase activity toward carboxymethyl cellulose (CMC) and/or microcrystalline cellulose (MCC) as high as 0.313 ± 0.01 U · ml(-1), but recombinant strains also hydrolyzed cotton, birch cellulose, copy paper, and wheat straw. Cocultivations of recombinant strains expressing different cellulase genes with MCC as the substrate were carried out to identify an appropriate set of cellulases for efficient hydrolysis of cellulose by R. opacus. Based on these experiments, the multicellulase gene expression plasmid pCellulose was constructed, which enabled R. opacus PD630 to hydrolyze as much as 9.3% ± 0.6% (wt/vol) of the cellulose provided. For the direct production of lipids from birch cellulose, a two-step cocultivation experiment was carried out. In the first step, 20% (wt/vol) of the substrate was hydrolyzed by recombinant strains expressing the whole set of cellulase genes. The second step was performed by a recombinant cellobiose-utilizing strain of R. opacus PD630, which accumulated 15.1% (wt/wt) fatty acids from the cellobiose formed in the first step.

The genome sequences of Cellulomonas fimi and "Cellvibrio gilvus" reveal the cellulolytic strategies of two facultative anaerobes, transfer of "Cellvibrio gilvus" to the genus Cellulomonas, and proposal of Cellulomonas gilvus sp. nov

Actinobacteria in the genus Cellulomonas are the only known and reported cellulolytic facultative anaerobes. To better understand the cellulolytic strategy employed by these bacteria, we sequenced the genome of the Cellulomonas fimi ATCC 484(T). For comparative purposes, we also sequenced the genome of the aerobic cellulolytic "Cellvibrio gilvus" ATCC 13127(T). An initial analysis of these genomes using phylogenetic and whole-genome comparison revealed that "Cellvibrio gilvus" belongs to the genus Cellulomonas. We thus propose to assign "Cellvibrio gilvus" to the genus Cellulomonas. A comparative genomics analysis between these two Cellulomonas genome sequences and the recently completed genome for Cellulomonas flavigena ATCC 482(T) showed that these cellulomonads do not encode cellulosomes but appear to degrade cellulose by secreting multi-domain glycoside hydrolases. Despite the minimal number of carbohydrate-active enzymes encoded by these genomes, as compared to other known cellulolytic organisms, these bacteria were found to be proficient at degrading and utilizing a diverse set of carbohydrates, including crystalline cellulose. Moreover, they also encode for proteins required for the fermentation of hexose and xylose sugars into products such as ethanol. Finally, we found relatively few significant differences between the predicted carbohydrate-active enzymes encoded by these Cellulomonas genomes, in contrast to previous studies reporting differences in physiological approaches for carbohydrate degradation. Our sequencing and analysis of these genomes sheds light onto the mechanism through which these facultative anaerobes degrade cellulose, suggesting that the sequenced cellulomonads use secreted, multidomain enzymes to degrade cellulose in a way that is distinct from known anaerobic cellulolytic strategies.

Novel modular endo-β-1,4-xylanase with transglycosylation activity from Cellulosimicrobium sp. strain HY-13 that is homologous to inverting GH family 6 enzymes

The gene (2304-bp) encoding a novel xylanolytic enzyme (XylK2) with a catalytic domain, which is 70% identical to that of Cellulomonas flavigena DSM 20109 GH6 β-1,4-cellobiohydrolase, was identified from an earthworm (Eisenia fetida)-symbiotic bacterium, Cellulosimicrobium sp. strain HY-13. The enzyme consisted of an N-terminal catalytic GH6-like domain, a fibronectin type 3 (Fn3) domain, and a C-terminal carbohydrate-binding module 2 (CBM 2). XylK2ΔFn3-CBM 2 displayed high transferase activity (788.3 IU mg(-1)) toward p-nitrophenyl (PNP) cellobioside, but did not degrade xylobiose, glucose-based materials, or other PNP-sugar derivatives. Birchwood xylan was degraded by XylK2ΔFn3-CBM 2 to xylobiose (59.2%) and xylotriose (40.8%). The transglycosylation activity of the enzyme, which enabled the formation of xylobiose (33.6%) and xylotriose (66.4%) from the hydrolysis of xylotriose, indicates that it is not an inverting enzyme but a retaining enzyme. The endo-β-1,4-xylanase activity of XylK2ΔFn3-CBM 2 increased significantly by approximately 2.0-fold in the presence of 50mM xylobiose.

Cyclic AMP regulates the biosynthesis of cellobiohydrolase in Cellulomonas flavigena growing in sugar cane bagasse

Cellulomonas flavigena produces a battery of cellulase components that act concertedly to degrade cellulose. The addition of cAMP to repressed C. flavigena cultures released catabolic repression, while addition of cAMP to induced C. flavigena cultures led to a cellobiohydrolase hyperproduction. Exogenous cAMP showed positive regulation on cellobiohydrolase production in C. flavigena grown on sugar cane bagasse. A C. flavigena cellobiohydrolase gene was cloned (named celA), which coded for a 71- kDa enzyme. Upstream, a repressor celR1, identified as a 38 kDa protein, was monitored by use of polyclonal antibodies.

Cellulases of mesophilic microorganisms: cellulosome and noncellulosome producers

The cellulolytic activity of mesophilic bacteria and fungi is described, with special emphasis on the large extracellular enzyme complex called the cellulosome. The cellulosome is composed of a scaffolding protein, which is attached to various cellulolytic and hemicellulolytic enzymes, and this complex allows the organisms to degrade plant cell walls very efficently. The enzymes include a variety of cellulases, hemicellulases, and pectinases that work synergistically to degrade complex cell-wall molecules.

CelAB, a multifunctional cellulase encoded by Teredinibacter turnerae T7902T, a culturable symbiont isolated from the wood-boring marine bivalve Lyrodus pedicellatus

We characterized a multifunctional cellulase (CelAB) encoded by the endosymbiont Teredinibacter turnerae T7902(T). CelAB contains two catalytic and two carbohydrate-binding domains, each separated by polyserine linker regions. CelAB binds cellulose and chitin, degrades multiple complex polysaccharides, and displays two catalytic activities, cellobiohydrolase (EC 3.2.1.91) and beta-1,4(3) endoglucanase (EC 3.2.1.4).

Characterization of a beta-N-acetylhexosaminidase and a beta-N-acetylglucosaminidase/beta-glucosidase from Cellulomonas fimi

The gram-positive soil bacterium Cellulomonas fimi is shown to produce at least two intracellular beta-N-acetylglucosaminidases, a family 20 beta-N-acetylhexosaminidase (Hex20), and a novel family 3-beta-N-acetylglucosaminidase/beta-glucosidase (Nag3), through screening of a genomic expression library, cloning of genes and analysis of their sequences. Nag3 exhibits broad substrate specificity for substituents at the C2 position of the glycone: kcat/Km values at 25 degrees C were 0.066 s(-1) x mM(-1) and 0.076 s(-1) x mM(-1) for 4'-nitrophenyl beta-N-acetyl-D-glucosaminide and 4'-nitrophenyl beta-D-glucoside, respectively. The first glycosidase with this broad specificity to be described, Nag3, suggests an interesting evolutionary link between beta-N-acetylglucosaminidases and beta-glucosidases of family 3. Reaction by a double-displacement mechanism was confirmed for Nag3 through the identification of a glycosyl-enzyme species trapped with the slow substrate 2',4'-dinitrophenyl 2-deoxy-2-fluoro-beta-D-glucopyranoside. Hex20 requires the acetamido group at C2 of the substrate, being unable to cleave beta-glucosides, since its mechanism involves an oxazolinium ion intermediate. However, it is broad in its specificity for the D-glucosyl/D-galactosyl configuration of the glycone: Km and kcat values were 53 microM and 482.3 s(-1) for 4'-nitrophenyl beta-N-acetyl-D-glucosaminide and 66 microM and 129.1 s(-1) for 4'-nitrophenyl beta-N-acetyl-D-galactosaminide.

Pyramiding unmarked deletions in Ralstonia solanacearum shows that secreted proteins in addition to plant cell-wall-degrading enzymes contribute to virulence

Ralstonia solanacearum, like many phytopathogenic bacteria, makes multiple extracellular plant cell-wall-degrading enzymes (CWDE), some of which contribute to its ability to cause wilt disease. CWDE and many other proteins are secreted to the milieu via the highly conserved type II protein secretion system (T2SS). R. solanacearum with a defective T2SS is weakly virulent, but it is not known whether this is due to absence of all the CWDE or the loss of other secreted proteins that contribute to disease. These alternatives were investigated by creating mutants of wild-type strain GMI1000 lacking either the T2SS or up to six CWDE and comparing them for virulence on tomato plants. To create unmarked deletions, genomic regions flanking the target gene were polymerase chain reaction (PCR)-amplified, were fused using splice overlap extension PCR, were cloned into a suicide plasmid harboring the sacB counter-selectable marker, and then, were site-specifically introduced into the genome. Various combinations of five deletions (delta pehA, delta pehB, delta B, PehC, and Pme) was not statistically different from GMI1000, but all the mutants lacking one or both cellulolytic enzymes (Egl or CbhA) wilted plants significantly more slowly than did the wild type. The GMI-6 mutant that lacks all six CWDE was more virulent than the mutant lacking only its two cellulolytic enzymes, and both were significantly more virulent than the T2SS mutant (GMI-D). Very similar results were observed in wounded-petiole inoculation assays, so GMI-6 and GMI-D appear to be less capable of colonizing tomato tissues after invasion. Because the T2SS mutant was much less virulent than the sixfold CWDE mutant, we conclude that other secreted proteins contribute substantially to the ability of R. solanacearum GMI1000 to systemically colonize tomato plants.

Studies ofThermobifida fusca plant cell wall degrading enzymes

I have been studying the Thermobifida fusca cellulose degrading proteins for the past 25 years. In this period, we have purified and characterized the six extracellular cellulases and an intracellular beta- glucosidase used by T. fusca for cellulose degradation, cloned and sequenced the structural genes encoding these enzymes, and helped to determine the 3-dimensional structures of two of the cellulase catalytic domains. This research determined the mechanism of a novel class of cellulase, family 9 processive endoglucanases, and helped to show that there were two types of exocellulases, ones that attacked the non-reducing ends of cellulose and ones that attacked the reducing ends. It also led to the sequencing of the T. fusca genome by the DOE Joint Genome Institute. We have studied the mechanisms that regulate T. fusca cellulases and have shown that cellobiose is the inducer and that cellulase synthesis is repressed by any good carbon source. A regulatory protein (CelR) that functions in the induction control has been purified, characterized, and its structural gene cloned and expressed in E. coli. I have also carried out research on two rumen bacteria, Prevotella ruminicola and Fibrobacter succinogenes, in collaboration with Professor James Russell, helping to arrange for the genomes of these two organisms to be sequenced by TIGR, funded by a USDA grant to the North American Consortium for Genomics of Fibrolytic Ruminal Biology.

Engineering the Exo-loop of Trichoderma reesei Cellobiohydrolase, Cel7A. A comparison with Phanerochaete chrysosporium Cel7D

The exo-loop of Trichoderma reesei cellobiohydrolase Cel7A forms the roof of the active site tunnel at the catalytic centre. Mutants were designed to study the role of this loop in crystalline cellulose degradation. A hydrogen bond to substrate made by a tyrosine at the tip of the loop was removed by the Y247F mutation. The mobility of the loop was reduced by introducing a new disulphide bridge in the mutant D241C/D249C. The tip of the loop was deleted in mutant Delta(G245-Y252). No major structural disturbances were observed in the mutant enzymes, nor was the thermostability of the enzyme affected by the mutations. The Y247F mutation caused a slight k(cat) reduction on 4-nitrophenyl lactoside, but only a small effect on cellulose hydrolysis. Deletion of the tip of the loop increased both k(cat) and K(M) and gave reduced product inhibition. Increased activity was observed on amorphous cellulose, while only half the original activity remained on crystalline cellulose. Stabilisation of the exo-loop by the disulphide bridge enhanced the activity on both amorphous and crystalline cellulose. The ratio Glc(2)/(Glc(3)+Glc(1)) released from cellulose, which is indicative of processive action, was highest with Tr Cel7A wild-type enzyme and smallest with the deletion mutant on both substrates. Based on these data it seems that the exo-loop of Tr Cel7A has evolved to facilitate processive crystalline cellulose degradation, which does not require significant conformational changes of this loop.

Molecular cloning and sequencing of the gene encoding an exopolygalacturonase of a Bacillus isolate and properties of its recombinant enzyme

An exopolygalacturonase (exo-PGase; EC 3.2.1.82) was found in the culture broth of a Bacillus isolate. The gene encoding the exo-PGase, pehK, was cloned by polymerase chain reaction using mixed primers designed from N-terminal and internal amino acid (aa) sequences of the enzyme (PehK). The determined nucleotide (nt) sequence of pehK revealed a 2940 bp open reading frame (980 aa) that encoded a putative signal sequence (27 aa) and a mature protein (953 aa; 103810 Da). The recombinant enzyme was purified to homogeneity from a culture broth of Bacillus subtilis harboring a pehK-containing plasmid. It had a molecular mass of 105 kDa and a pI value of 5.0. The maximum activity was observed at pH 8 and 55 degrees C in Tris-HCl buffer. The degradation products from polygalacturonic or oligogalacturonic acids were digalacturonic acid, like the exo-PGases, PehX of Erwinia chrysanthemi and PehB of Ralstonia solanacearum. The deduced aa sequence of PehK exhibited moderate homology to those of PehX and PehB with approx. 30% identity for both. High homology was observed in a suitably aligned internal region of the three enzymes (65% identity), and some of the conserved aa residues appeared to form the catalytic core of the enzymes.

Mapping of genes encoding glycoside hydrolases on the chromosome of Cellulomonas fimi

Cellulomonas fimi genomic DNA was digested with HpaI, MunI, HindIII, and NsiI, producing fragments ranging in size from 20 to 1400 kbp that were resolved by pulsed field gel electrophoresis. Genetic and physical linkages were determined by Southern blotting and were used to construct a genome map. Cellulomonas fimi has a single circular chromosome of approx. 4000 kbp. Except for two closely linked genes, cbh6A and cel5A, the genes known to encode glycoside hydrolases are scattered widely on the chromosome.Key words: Cellulomonas fimi, genome map, pulsed field gel electrophoresis, glycoside hydrolases.

Cloning and sequencing of two genes encoding chitinases A and B from Bacillus cereus CH

Two genes encoding chitinases A and B (chiA and chiB) from Bacillus cereus CH were cloned into Escherichia coli XL1-Blue MRF' by using pBluescript II SK+, and their nucleotide sequences were determined. Open reading frames of the chiA and chiB genes encoded distinct polypeptide chains consisting of 360 and 674 amino acid residues, respectively, with calculated molecular sizes of 39 470 and 74 261 Da, respectively. Comparison of the deduced amino acid sequences with those of other bacterial chitinases revealed that chitinase A consisted of a catalytic domain, while chitinase B consisted of three functional domains, a catalytic domain, a fibronectin type III-like domain, and a cellulose-binding domain. The primary structures of these two proteins were not similar to each other.Key words: Bacillus cereus, chitinase, cloning.

Capacity of thermomonospora alba XylA to impart thermostability in family F/10 chimeric xylanases

To reveal structure-function relationships of family F/10 glycanases, an in vitro molecular level shuffling experiment was conducted to accumulate useful amino acid residues from two homologous F/10 xylanases, FXYN of Streptomyces olivaceoviridis E-86 and XylA of Thermomonospora alba ULJB1, into a single chimeric xylanase. The parent genes were shuffled by crossovers at selected module borders using self-priming Polymerase Chain Reaction (PCR)s. The shuffled constructs, designated as FXYN-M3/4-XylA, FXYN-M9/10-XylA, and FXYN-M14/15-XylA were cloned and their nucleotide sequences were confirmed. Two chimera, FXYN-M3/4-XylA and FXYN-M14/15-XylA, demonstrated activity against RBB-xylan and were over-expressed as His-tag fusion proteins under control of T5 promoter of pQE60. The homogeneously pure chimeric proteins, FXYN-M3/4-XylA and FXYN-M14/15-XylA showed improved thermal and pH profiles compared to those of one of the parents, FXYN. This was apparently due to the influence of amino acids inherited from thermophilic XylA. Measured K(m) and kcat values were closer to those of the other parent, XylA. Interestingly, a significant level of heat tolerance up to 60 degrees C, was recorded for FXYN-M3/4-XylA in comparison to only 40 degrees C for FXYN-M14/15-XylA though their temperature optima did not correlates with their thermal stability. These results indicated that the amino acid residues of the larger T. alba XylA DNA fragment present in FXYN-M3/4-XylA were responsible for inducing its thermal stability.

Control of Virulence and Pathogenicity Genes of Ralstonia Solanacearum by an Elaborate Sensory Network

Ralstonia solanacearum causes a lethal bacterial wilt disease of diverse plants. It invades the xylem vessels of roots and disseminates into the stem where it multiplies and wilts by excessive exopolysaccharide production. Many of its key extracytoplasmic virulence and pathogenicity factors are transcriptionally controlled by an extensive network of distinct, interacting signal transduction pathways. The core of this sensory network is the five-gene Phc system that regulates exopolysaccharide, cell-wall-degrading exoenzymes, and other factors in response to a self-produced signal molecule that monitors the pathogen's growth status and environment. Four additional environmentally responsive two-component systems work independently and with the Phc system to fine-tune virulence gene expression. Another critical system is Prh which transduces plant cell-derived signals through a six-gene cascade to activate deployment of the Type III secretion pathway encoded by the hrp pathogenicity genes. Here I summarize knowledge about the regulated targets, signal transduction mechanisms, and crosstalk between Phc, Prh, and other systems. I also provide insight into why R. solanacearum has evolved such a sophisticated sensory apparatus, and how it functions in disease.

A novel Cellvibrio mixtus family 10 xylanase that is both intracellular and expressed under non-inducing conditions

Hydrolysis of the plant cell wall polysaccharides cellulose and xylan requires the synergistic interaction of a repertoire of extracellular enzymes. Recently, evidence has emerged that anaerobic bacteria can synthesize high levels of periplasmic xylanases which may be involved in the hydrolysis of small xylo-oligosaccharides absorbed by the micro-organism. Cellvibrio mixtus, a saprophytic aerobic soil bacterium that is highly active against plant cell wall polysaccharides, was shown to express internal xylanase activity when cultured on media containing xylan or glucose as sole carbon source. A genomic library of C. mixtus DNA, constructed in lambdaZAPII, was screened for xylanase activity. The nucleotide sequence of the genomic insert from a xylanase-positive clone that expressed intracellular xylanase activity in Escherichia coli revealed an ORF of 1137 bp (xynC), encoding a polypeptide with a deduced M(r) of 43413, defined as xylanase C (XylC). Probing a gene library of Pseudomonas fluorescens subsp. cellulosa with C. mixtus xynC identified a xynC homologue (designated xynG) encoding XylG; XylG and xynG were 67% and 63% identical to the corresponding C. mixtus sequences, respectively. Both XylC and XylG exhibit extensive sequence identity with family 10 xylanases, particularly with non-modular enzymes, and gene deletion studies on xynC supported the suggestion that they are single-domain xylanases. Purified recombinant XylC had an M(r) of 41000, and displayed biochemical properties typical of family 10 polysaccharidases. However, unlike previously characterized xylanases, XylC was particularly sensitive to proteolytic inactivation by pancreatic proteinases and was thermolabile. C. mixtus was grown to late-exponential phase in the presence of glucose or xylan and the cytoplasmic, periplasmic and cell envelope fractions were probed with anti-XylC antibodies. The results showed that XylC was absent from the culture media but was predominantly present in the periplasm of C. mixtus cells grown on glucose, xylan, CM-cellulose or Avicel. These data suggest that C. mixtus can express non-modular internal xylanases whose potential roles in the hydrolysis of plant cell wall components are discussed.

Mannan-degrading enzymes from Cellulomonas fimi

The genes man26a and man2A from Cellulomonas fimi encode mannanase 26A (Man26A) and beta-mannosidase 2A (Man2A), respectively. Mature Man26A is a secreted, modular protein of 951 amino acids, comprising a catalytic module in family 26 of glycosyl hydrolases, an S-layer homology module, and two modules of unknown function. Exposure of Man26A produced by Escherichia coli to C. fimi protease generates active fragments of the enzyme that correspond to polypeptides with mannanase activity produced by C. fimi during growth on mannans, indicating that it may be the only mannanase produced by the organism. A significant fraction of the Man26A produced by C. fimi remains cell associated. Man2A is an intracellular enzyme comprising a catalytic module in a subfamily of family 2 of the glycosyl hydrolases that at present contains only mammalian beta-mannosidases.

Genetic analysis of a chromosomal region containing vanA and vanB, genes required for conversion of either ferulate or vanillate to protocatechuate in Acinetobacter

VanA and VanB form an oxygenative demethylase that converts vanillate to protocatechuate in microorganisms. Ferulate, an abundant phytochemical, had been shown to be metabolized through a vanillate intermediate in several Pseudomonas isolates, and biochemical evidence had indicated that vanillate also is an intermediate in ferulate catabolism by Acinetobacter. Genetic evidence supporting this conclusion was obtained by characterization of mutant Acinetobacter strains blocked in catabolism of both ferulate and vanillate. Cloned Acinetobacter vanA and vanB were shown to be members of a chromosomal segment remote from a supraoperonic cluster containing other genes required for completion of the catabolism of ferulate and its structural analogs, caffeate and coumarate, through protocatechuate. The nucleotide sequence of DNA containing vanA and vanB demonstrated the presence of genes that, on the basis of nucleotide sequence similarity, appeared to be associated with transport of aromatic compounds, metabolism of such compounds, or iron scavenging. Spontaneous deletion of 100 kb of DNA containing this segment does not impede the growth of cells with simple carbon sources other than vanillate or ferulate. Additional spontaneous mutations blocking vanA and vanB expression were shown to be mediated by IS1236, including insertion of the newly discovered composite transposon Tn5613. On the whole, vanA and vanB appear to be located within a nonessential genetic region that exhibits considerable genetic malleability in Acinetobacter. The overall organization of genes neighboring Acinetobacter vanA and vanB, including a putative transcriptional regulatory gene that is convergently transcribed and overlaps vanB, is conserved in Pseudomonas aeruginosa but has undergone radical rearrangement in other Pseudomonas species.

amlC, another amylolytic gene maps close to the amlB locus in Streptomyces lividans TK24

The region located upstream of the alpha-amylase gene (amlB) of Streptomyces lividans TK24 (Yin et al., 1997) contains a 2978-bp-long ORF divergent from amlB, and designated amlC. amlC Encodes a 993amino acid (aa) protein with a calculated molecular weight of 107.054kDa. On the basis of sequence similarity as well as enzymatic activity, AmlC is likely to belong to the 1, 4-alpha-D-glucan glucanohydrolase family. amlC is transcribed as a unique 3kb leaderless monocistronic mRNA. Primer extension experiments allowed the identification of promoter sequences that do not resemble the typical eubacterial promoter sequences. amlC was successfully disrupted and was mapped at approx. 700kb from a chromosomal end of S. lividans TK24, 100kb on the right of the amplifiable unit AUD1 (Volff et al., 1996). Nevertheless, amlC disruption seemed to be accompanied by extensive rearrangements of the 2500-kb DraI-II fragment of the chromosome.

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Enzymatic properties of cellulases from Humicola insolens

We present the analysis of the activities towards soluble and insoluble substrates of seven cellulases cloned from the saprophytic fungus Humicola insolens. The activity on the soluble polymer substrate carboxymethylcellulose (CMC) was used to determine the pH activity profiles of the five endoglucanases (EG), whereas cellotriose and reduced cellohexaose were used to determine the pH activity profiles of cellobiohydrolase I (CBH) and CBH II. All the EGs show optimal activity between pH 7 and 8.5, while CBH I and CBH II peak around pH 5.5 and 9, respectively. The catalytic activities of five of these cellulases were investigated under neutral and alkaline conditions using reduced cellohexaose as a substrate in a cellobiose oxidase coupled assay. EG I and CBH I both belong to family (7) according to a recent classification of glycosyl hydrolases. They both have activity against cellotriose. Therefore, they were studied using a coupled assay involving glucose oxidase. The activity on insoluble substrate (phosphoric-acid swollen cellulose) was assessed by the formation of reducing groups. The presence of a cellulose binding domain (CBD) lowers the apparent KM. This can be explained by the dispersing action of CBD. However, the CBD also reduces the apparent k(cat) probably by slowing down the mobility. EG I, EG II and EG III show similar activity towards CMC and amorphous cellulose, while EG V, EG VI, CBH I and CBH II have the highest catalytic rate on amorphous cellulose. In summary, Humicola insolens possesses a battery of cellulose-degrading enzymes which cooperate in the efficient hydrolysis of cellulose.

Structure of the Clostridium stercorarium gene celY encoding the exo-1,4-beta-glucanase Avicelase II

The nucleotide sequence of the celY gene coding for the thermostable exo-1,4-beta-glucanase Avicelase II of Clostridium stercorarium was determined. The gene consists of an ORF of 274Z bp which encodes a preprotein of 914 amino acids with a molecular mass of 103 kDa. The signal-peptide cleavage site was identified by comparison with the N-terminal amino acid sequence of Avicelase II purified from C stercorarium. The celY gene is located in close vicinity to the celZ gene coding for the endo-1,4-beta-glucanase Avicelase I. The CelY-encoding sequence was isolated from genomic DNA of C. stercorarium with the PCR technique. The recombinant enzyme produced in Escherichia coli as a LacZ'-CelY fusion protein could be purified using a simple two-step procedure. The properties of CelY proved to be consistent with those of Avicelase II purified from C. stercorarium. Sequence comparison revealed that CelY consists of an N-terminal catalytic domain flanked by a domain of 95 amino acids with unknown function joined to a type III cellulose-binding domain. The catalytic domain belongs to the recently proposed family L of cellulases (family 48 of glycosyl hydrolases).

Mechanistic consequences of mutation of active site carboxylates in a retaining beta-1,4-glycanase from Cellulomonas fimi

The exoglucanase/xylanase Cex from Cellulomonas fimi is a retaining glycosidase which functions via a two-step mechanism involving the formation and hydrolysis of a covalent glycosyl-enzyme intermediate. The roles of three conserved active site carboxylic acids in this enzyme have been probed by detailed kinetic analysis of mutants modified at these three positions. Elimination of the catalytic nucleophile (E233A) results in an essentially inactive enzyme, consistent with the important role of this residue. However addition of small anions such as azide or formate restores activity, but as an inverting enzyme since the product formed under these conditions is the alpha-glycosyl azide. Shortening of the catalytic nucleophile (E233D) reduces the rates of both formation and hydrolysis of the glycosyl-enzyme intermediate some 3000-4000-fold. Elimination of the acid/base catalyst (E127A) yields a mutant for which the deglycosylation step is slowed some 200-300-fold as a consequence of removal of general base catalysis, but with little effect on the transition state structure at the anomeric center. Effects on the glycosylation step due to removal of the acid catalyst depend on the aglycon leaving group ability, with minimal effects on substrates requiring no general acid catalysis but large (> 10(5)-fold) effects on substrates with poor leaving groups. The Brønsted beta 1g value for hydrolysis of aryl cellobiosides was much larger (beta 1g approximately -1) for the mutant than for the wild-type enzyme (beta 1g = -0.3), consistent with removal of protonic assistance. The pH-dependence was also significantly perturbed. Mutation of a third conserved active site carboxylic acid (E123A) resulted in rate reductions of up to 1500-fold on poorer substrates, which could be largely restored by addition of azide, but without the formation of glycosyl azide products. These results suggest a simple strategy for the identification of the key active site nucleophile and acid/base catalyst residues in glycosidases without resort to active site labeling.

Characterization of CenC, an enzyme from Cellulomonas fimi with both endo- and exoglucanase activities

The cenC gene, encoding beta-1,4-glucanase C (CenC) from Cellulomonas fimi, was overexpressed in Escherichia coli with a tac-based expression vector. The resulting polypeptide, with an apparent molecular mass of 130 kDa, was purified from the cell extracts by affinity chromatography on cellulose followed by anion-exchange chromatography. N-terminal sequence analysis showed the enzyme to be properly processed. Mature CenC was optimally active at pH 5.0 and 45 degrees C. The enzyme was extremely active on soluble, fluorophoric, and chromophoric glycosides (4-methylumbelliferyl beta-glycosides, 2'-chloro-4'-nitrophenyl-beta-D-cellobioside, and 2'-chloro-4'-nitrophenyl-lactoside) and efficiently hydrolyzed carboxymethyl cellulose, barley beta-glucan, lichenan, and, to a lesser extent, glucomannan. CenC also hydrolyzed acid-swollen cellulose, Avicel, and bacterial microcrystalline cellulose. However, degradation of the latter was slow compared with its degradation by CenB, another C. fimi cellulose belonging to the same enzyme family. CenC acted with inversion of configuration at the anomeric carbon, in accordance with its classification as a family 9 member. The enzyme released mainly cellobiose from soluble cellodextrins and insoluble cellulose. Attack appeared to be from the reducing chain ends. Analysis of carboxymethyl cellulose hydrolysis suggests that CenC is semiprocessive enzyme with both endo- and exoglucanase activities.